Name: Zubair Aslam s/o Muhammad Aslam

Address: Bisha, Saudi Arabia (Temporary) Dist. Hafizabad, Province Punjab, Pakistan (Permanent)

Mobile: +966-599344246, +966542849378 E-mail: agogengineer@gmail.com

OBJECTIVE

PROFILE

HVAC

Seeking a thought-provoking and accountable career in the field of mechanical systems by which I can develop my skills and be an asset for my future employer. I am B.Sc. Mechanical Engineer almost 3 Years’ experience as a site

Engineer for MEP works e.g. HVAC (Duct fabrication and installation +

chilled water piping), PLUMBING (Water supply, Gravity drainage, storm

water) & Firefighting Piping. My current project is a 4 star hotel. I joined

this project from the beginning and now it’s nearly finalized. Along this I

have completed two residential buildings, one large commercial offices’

building and one Mosque.

My Skills & capability are not less than 5 years' experienced engineer.

EXPERTISE

Possess knowledge of cooling and heating load calculations

for any type of building following ASHRAE standards by using

Carrier HAP 5.0.

Ability to provide creative and practical design solutions to meet

the customer’s specifications.

Familiar with ASHRAE air distribution standards.

Familiar with SMACNA duct construction standards.

Familiar with SMACNA duct installation standards.

Familiar to design duct sizing by constant velocity method, equal

friction method.

Able to design exhaust duct and exhaust duct fans.

Curriculum Vitae

PLUMBING

Calculation of chilled water pipe sizes as per ASHRAE codes and

designing of chilled water supply and return piping layout and

selection of various accessories.

Selection of chilled water FCU’s and AHU’s according to

specifications and site conditions.

Pump head calculations and selection of chilled water pumps.

Preparation and reviewing shop drawings and Material Submittal.

Able to prepare BOQ, equipment schedule and specifications.

Prepare quotations and present them in a simple manner.

Knowledge of major HVAC Manufactures and the product brand

they possess.

Excellent ability for plumbing design e.g. potable water supply, Drainage, storm water as per UPC codes.

Ability to calculate required hydraulic pressure and flow rate for potable water supply pump and pump selection as per UPC codes.

Septic Tank and water supply Tank calculations as per UPC codes.

Drainage and water supply fixtures, sanitary fittings, water heaters and material selection.

Able to prepare plumbing BOQ, equipment schedule and

specifications.

Prepare quotations and present them in a simple manner.

Knowledge of major plumbing manufactures and the product

brand they possess.

FIREFIGHTING

CALCULATION

SKILLS

Possess knowledge of Firefighting design as per NFPA CODES e.g. hazard area identification, Sprinkler spacing, required flow rate and pressure.

Calculations and selection of Sprinkler type, Fire hose cabinet, Landing valves and Zonal control valves.

Calculation for firefighting pipe sizes.

Hydraulic calculations (by ELITE) to determine required pump pressure and selection of right pump for firefighting system.

Calculations for firefighting storage tank.

Familiar with NFPA13 installation standards for sprinklers.

Strong technical expertise of piping, pipe supports, valves, fabrication, erection, welding, inspection and hydro test.

Able to prepare firefighting BOQ, equipment schedule and

specifications.

Prepare quotations and present them in a simple manner.

Knowledge of major firefighting manufactures and the product

brand they possess.

Possess excellent knowledge of calculations:

Heat and cooling load calculation (Carrier HAP 5.0)

ELITE Hydraulic calculation for Firefighting and water supply head.

Exhaust Air calculation.

Fresh Air calculation.

Duct Size calculation.

Chilled water head and pipe size calculation.

Potable water supply pipe size calculation

Pumps selection.

DRAWING

SKILLS

MANAGERIAL SKILLS

PROFESSIONAL

SKILLS

Comfortable with architectural and civil structure drawings.

HVAC, Plumbing and Firefighting designing and shop drawings.

Ducts, duct fittings, Plenum Box, diffuser box fabrication as per

shop drawing.

Prepare as built drawings.

Specialize in 2D AutoCAD.

Comfortable with AutoCAD MEP and Revit MEP 3D drawings.

Possess knowledge of MEP services co-ordination e.g. above

ceiling and risers services co-ordination and able to present 3D

design for critical areas.

Ghabti Grand Hotel (4 star), consists 10 stories, I efficiently

managed the entire mechanical team with over 40 labors and

three foremen at Rouf National Contracting Company (RNCC),

Saudi Arabia

Handle over 15 people at MAP Rice mills construction project for

plumbing and ducting. (SPARCO Construction Company,

Pakistan)

Well managed PIEAS University Debating Society as being

President for 1.5 years and organized many events.

Well managed PIEAS University Hiking club as a President for 1

year and arranged numerous tours.

Task-oriented, organized and hardworking, Can work under pressure and in a team, Punctual, Conscientious and Self-motivated.

Drive the best output of production, goals and efficiency.

Indicates a moderate preference to work under the competent leadership of others.

Applying scientific / technical and logical things to identify, analyses and solving problems.

CERTIFICATION

AND

MEMBERSHIP

PROFESSIONAL

EDUCTION

Motivated to describe, explain, teach, illustrate and interpret.

Team and leader with initiative and dynamic skills, and can adapt with changing environment.

Handle and accept guidance and advice, yet work under minimum supervision.

Talented at managing team members and developing high performance groups.

Official Member of International Association of Mechanical and

Plumbing Officials (IAMPO).

Officially certified for Potable water supply pipe sizing as per UPC

codes by IAMPO.

HVAC Certificate of attendance: 1. Speed control Methodology of different types of chiller technologies

2. Best in class design for superior direct expansion system

3. 360 Air conditioning technology

4. How to rightly deal with hygienic aspects of air Handling Unit

5. Precise measurements of operating conditions in modern ventilation and

air conditioning

6. Design for tomorrow, Innovative air cooled chillers

7. Future of refrigeration BACHELOR OF SCIENCE (B.SC.) IN MECHANICAL ENGINEERING

Duration: (2010-2014)

From: Pakistan Institute of Engineering and Applied

Sciences (PIEAS), Islamabad (Ranked No. 1 Engineering University in Pakistan by HEC, Pakistan & QC

University Ranking 2014)

Major Subjects: Design and Analysis

Refrigeration & air-conditioning

Heat & Mass Transfer

Fluid Dynamics

Thermodynamics

PROFESSIONAL

EXPERIENCE

RAUF NATIONAL CONTRACTING COMPANY (ELECTRO-

MECHANICAL), SAUDI ARABIA

Job Role: Site Engineer Mechanical Project: Al-Khabti Grand Hotel (4-Star)

Location: Bisha, KSA (Asser Province)

Duration: From Jun, 2015 to Still

ASSIGNMENT:

Engineering technical assistance in procurement, supervision in

construction and Installation of Duct, Installation & commissioning

HVAC system of 800 Tons capacity (4 chillers): 11 Air handling units,

296 Fan coil units, Ventilation fans & Stairs Pressurize Ducts and

Supervision of duct fabrication.

Engineering technical assistance in procurement, site planning,

supervision in construction, commissioning and installation of all pipe

work e.g. sprinklers & firefighting system, Plumbing system (pressure

& Gravity), storm water and chilled water piping system.

Coordination of MEP services in ceiling, corridors, and risers and

coordinate MEP drawings with architecture and building structure

drawings.

JOB DESCRIPTION:

Review all Shop drawings for final installation and fabrication.

Coordination of all MEP systems.

Selection & deduction of material and prepare BOQ.

Supervise duct fabrication and installation as per SMACNA CODES.

Supervise Firefighting pipes fabrication and installation as per

NFPA CODES.

Chilled water Pipe fabrication, insulation & installation.

Supervise Plumbing pipe installation including water supply,

drainage & Storm water as per UPC CODES.

Installation and commissioning of FCU's, AHU's & Chillers.

Supervise Firefighting, swimming pool, water supply, sewerage

water, pumps installation and commissioning.

Manage procurement on site.

PROFESSIONAL EXPERIENCE

SPARCO CONSTRUCTION COMPANY, PAKISTAN

Job Role: Site Supervisor Mechanical

Project: MAP Rice Mills Offices Construction

Location: Hafizabad , Pakistan

Duration: From 2014 to 2015

ASSIGNMENT:

Engineering technical assistance in procurement, site planning,

supervision in construction, commissioning and installation of all pipe

work e.g. sprinklers & firefighting system, Plumbing system (pressure

& Gravity), storm water, Split AC Unit Installation.

Coordination of MEP services in ceiling and corridors and coordinate

MEP drawings with architecture and civil structure drawings.

JOB DESCRIPTION:

Review all Shop drawings for final installation and fabrication.

Coordination of all MEP systems.

Selection & deduction of material and prepare BOQ.

Supervise Firefighting pipes fabrication and installation as per

NFPA CODES.

Supervise copper piping for split AC unit Installation and installation

of indoor and outdoor units.

Supervise Plumbing pipe installation including water supply,

sewerage, Drainage and Storm water.

Supervise Firefighting piping, Sprinkler and Fire Hose cabinets

Installation

Pumps installation and commissioning.

Manage procurement on Site.

COMPUTER

SKILLS

PERSONAL

DATA

REFERENCES

AUTOCAD 2D Well Familiar with maximum commands.

Revit MEP Well familiar with 2D, 3D features and can make all type of

Mechanical Designs including assembly.

Elite Fire Software Complete understanding and can calculate Hydraulic calculation for Fire Sprinkler System.

Carrier HAP 5.0 Complete understanding of cooling load calculation and equipment selection.

Microsoft Office Well aware with MS Word, Excel (Formula and charts) and Power point (Presentation).

Microsoft Project Well familiar with Microsoft project planning and scheduling.

Computer Maintenance I have good knowledge of computer software and hardware.

Date of Birth: 25 Dec, 1991.

Marital status: Single.

Nationality: Pakistani.

Saudi Visa Status: Transferable

Drive license: Saudi Arabia, Pakistan

Engineer Mohammed Youssef Mohammed Youssef Project Manager at Rouf National Contracting Company RNCC Mobile: 00966-547288376

Engineer Abdul Fateh Senior Architect Engineer at Rouf National Contracting Company RNCC Mobile: 00966-550771961