Evolis Kiosk 3rd

generation A modular solution for your front-office applications

March 30th

, 2011

Evolis Card Printer - © March 2011. All rights reserved. Subject to modification without notice 2

Evolis Card Printer - © March 2011. All rights reserved. Subject to modification without notice 3

Evolis Kiosk 3 design aims at suiting a wide range of card personalization needs in a front-

office environment.

Based on the Dualys 3 printing module, Evolis Kiosk 3 offers a 470 cards feeder’s capacity, a

flip-over module, a very high printing quality and a wide range of encoding features such as

magnetic stripes, smart contact and contactless chips.

The proven Evolis quality standards for design and manufacturing provide this Kiosk with

high availability and performance.

I/ Kiosk 3 Specifications

II/ Configurations and options

Printing Module

Evolis Card Printer - © March 2011. All rights reserved. Subject to modification without notice 4

Card Feeder

Card Exit

Encoding options

Evolis Card Printer - © March 2011. All rights reserved. Subject to modification without notice 5

III/ Kiosk3 design

The Evolis Kiosk 3 is delivered with a

protective metallic dust cover on the top, as

well as a metallic cover to protect the

electronic components (left side).

Opening the bracket will give you a wide

access the inside of the printing module,

ribbons and card transport system.

The picture below shows the right side of the

module: gears and belts, control panel (red)

and card feeder mechanism (right side)

APPENDIX A Available in A3 format upon request