We carry the replacement parts you need to keep your equipment up and running. With thousands of Genuine HENEK Parts in stock to support your HENEK and Gulfgate Systems we can save you money, reduce your downtime, and extend the service life of your equipment.

PartsWe manufacture a complete line of original HENEK Elements and OEM Replacements for all of your liquid and air applications. As the manufacture we control the quality, delivery and price of our elements so that we can better serve you—our customer. Give us a call with your next requirement.

Elements

HENEK’s HTP Series allows you to achieve the highest possible levels of turbine oil purity. Our TOP systems combine the principles of rapid water removal used on our TOC systems and the polishing characteristics of our HLV vacuum oil purifiers to obtain maximum turbine oil system cleanliness. Backed by 40 years of design experience, our Turbine Oil Polishing systems remove free, emulsified, and dissolved water quickly and effectively to improve system performance and reduce your operating and maintenance costs.

HTP Series – Turbine Oil Polishers

HENEK HTP-140/HLV-900HENEK HTC 140/70

HENEK’s HTC Series offers the fastest and most effective way to purify turbine oil. These fully automatic TOC systems effectively remove water and particulate matter from turbine oil, extending turbine life and reducing bearing failures. Available in a wide range of flow rates, including variable speed, these units are designed to provide complete reservoir turnover once every two hours.

HTC Series – Turbine Oil Conditioners

• Operating flow rates from 3 to 140 gallons per minute. • Free and emulsified water removal down to 25PPM with total

water removal rates down to less than 100PPM.• Particulate removal to ISO standards utilizing absolute

rated elements.

• Single stage flow rates of 12 to 75 GPM diesel and 25 to 150 GPM jet fuel.

• Two stage flow rates of 50 to 700 GPM diesel and 100 to 1400 GPM jet fuel.

• Standard service pressure of 150 PSI (higher on request).

• Operating flow rates from 3 to 140 gallons per minute. • Free and emulsified water removal down to 25PPM with total

water removal rates down to less than 50PPM.• Particulate removal to ISO standards utilizing absolute

rated elements.

HENEK HFS Series

HFS Series – Single and Two Stage Filter Separator Vessels

HENEK’s HFS Series of filter separator vessels are designed for fast, effective removal of water and particulate from fuels and light oils. These vessels work on the coalescing and gravity settling principle. Their applications include many light viscosity, low density, and high inter facial tension liquids. They are available in single stage vessels that are compact and lightweight for lower flow applications and larger two stage vessels for high flow applications up to 1400 GPM.

“The Fluid Purification Specialists”

The HENEK Rental Store has the largest and best maintained fleet of oil purification equipment in the industry. From filter vessels to complete oil purifying systems we have the equipment to meet the needs of your short or long term project. Contact our knowledgeable staff today to find the rental solution you need to get the job done.

RentalsHENEK’s Factory Service Center is fully equipped to handle any repair situation. At our facility or yours, our fully trained technicians provide fast, accurate repairs on all types of industrial purification equipment. Scheduled service contracts are available to keep your equipment running at peak efficiency.

Service

HENEK’s HLV Series is the ideal solution for simple and effective purification of lubricating, turbine and hydraulic oils. Our oil purification systems use proven technology to remove water, gases, and particulate from liquid streams, restoring expensive oils to their original strength without removing costly additives or agitating the oil. Available in a variety of flow rates, HENEK has the expertise to manufacture a LO-VAC system to meet your specific needs.

HLV Series – LO-VAC Industrial Oil Purifiers

• Removes up to 2% water in a single pass down to <50 PPM; gases, light hydrocarbons and particulate down to .5 micron nominal.

• Operating flow rates ranging from 60 to 3000 GPH with vacuum pump capacities up to 3000 CFM.

• Stationary or portable units with a full range of voltage, control and other system options available.

HENEK’s HBV & HFV Series of bag and filter element vessels remove dir t and other contaminants from various fuels and oils. Our vessels are designed and built in carbon or stainless steel to ASME standards for optimal per formance and durability. Available in both standard and custom sizes, HENEK has the expertise to manufacture a filter vessel to meet your specific needs.

HBV & HFV Series – Particulate Filter Vessels

• Available for bag, pleated paper, pleated glass, coalescer/separator, water absorbing and string wound elements.

• Flow rates from 1 to 3000 GPM with a standard service pressure of 150 PSI, (higher upon request).

• Stand alone, skid mounted or portable with a full range of gauge, valve and gasket options available.

HENEK HFV Series

HENEK’s HHV Series oil purification systems are designed specifically to meet the operational, economic and environmental needs of the electrical industry in purifying insulating oils through dehydration, degasification and filtration processes. By removing even trace amounts of water, gas and particulate, the HHV Series restores transformer, compressor and refrigeration oils to their original strength without removing expensive additives. Available in a variety of flow rates, both stationary and portable units have a full range of voltage, control and heater options.

HHV Series – HI-VAC Insulation Oil Purifiers

• Removes water down to <10 PPM, air & gases to .25% of total content and particulate to .5 micron nominal.

• Operating flow rates ranging from 30 to 3000 GPH with vacuum pump capacities up to 3000 CFM.

• Operating vacuum of .5 to 5 mmHg with maximum blank-off pressure of .01 mmHg (10 microns).

HENEK HHV-2400

HENEK HLV-600

www.HENEKUSA.com713-644-5558

Let us custom-design equipment to meet your specific filtration requirements. Our experienced team uses the latest in 3D CAD design software, materials management programs, and advanced welding equipment to craft a product to your precise demands. Just tell us your ideas, and we’ll turn them into a reality.

FabricationLet HENEK train your operators so that your investment brings greater returns when your new or existing equipment is put to safe and skillful use. At our facility or yours, HENEK’s Operations and Maintenance Training Programs can be customized to your equipment fleet. Call to schedule your training today.

Training

HENEK’s HEV Series are portable, compact and economical oil conditioners with a 200 GPH process flow rate. Their principal function is the removal of water, gases and light hydrocarbons from oil. The ECONO-VAC has been designed with both economy and portability in mind. Its ease of use and reliability makes it an ideal choice for industrial oil purification where convenience, dependability and low cost are factors.

HEV Series – ECONO-VAC Industrial Oil Purifiers

• Removes up to 2% water in a single pass down to <50 PPM; gases, light hydrocarbons and particulate down to .5 micron nominal.

• Does not remove costly additives and the flow pattern is designed not to agitate the oil.

• Designed as portable units equipped with casters, pull tongues and automatic controls for unattended operation.

HENEK’s HPV & HPC Series of industrial portable vessel systems offer the ultimate in convenience and portability utilizing a rugged two wheel hand truck design. These reliable systems can easily be moved from reservoir to reservoir in order to control particulate and water ingression issues before they become a problem. They are fully self-contained and are available with a wide selection of elements to support many different filtration and water removal requirements. All you have to do is plug them in and go.

HPV & HPC Series – Portable Filtration and Conditioning Systems

• Operating flow rates up to 10 GPM with 150 PSI service pressures in all carbon steel welded construction.

• Available for bag, pleated paper, pleated glass, coalescer/separator, water absorbing and string wound elements.

• Pumping Stations, Flushing Skids, Heater Skids, On-Line Dehydration, Filtering & Coalescing Systems and more.

• Flow ranges from 1 to 5000 GPM with service pressures from 10 to 150 PSI (higher on request).

• From pumping stations and flushing skids to stand-alone heating systems, we can build custom solutions for your oil purification needs.

HENEK HPV Series

HENEK HSY Series

HENEK’s HSY Series includes a broad range of custom and standard units manufactured to meet specific customer needs. Our HSY Series combines the varied product lines that we manufacture into one integrated piece of equipment. This capability distinguishes us from the competition and enables us to provide effective, efficient and reliable custom-designed equipment to meet your specific requirements.

HSY Series – Filter, Flush and Heat Systems

HENEK HEV200ECONO-VAC

HENEK Fluid Purity Systems, Inc. is guided by a simple principle: to provide quality, long-lasting products at competitive prices. It’s this commitment to excellence that has helped us become a worldwide leader in fluid purification and dehydration technology.

At HENEK, you’ll always get a fair price on top-of-the-line vacuum dehydrators, turbine oil conditioners, and fuel filter separators. That’s because our team—including former Gulfgate Equipment engineers—boasts a combined 82 years of experience in design, sales, service, and equipment rentals.

Clients from all industries turn to HENEK because they know our products are built to last longer than our competitors’. Our oil purification systems give you maximum return on your investment, and they can be custom-designed to meet even the strictest purification demands.

Experience the HENEK difference for yourself. Call 713-644-5558 today to discover how we can exceed all your fluid purification needs.

• Power Generation• Refining • Petrochemical • Pulp and Paper Milling• Power Distribution • Environmental • Aviation • Utilities

• Diesel and Biodiesel• OEMs • Military• Exploration/Drilling• Steel Mills • Professional Reclamation• Compressors • Fuel Distribution

Industrial Oil Purification Systems:Sales, Rentals, Parts and Service.

www.HENEKUSA.com713-644-5558

HENEK Fluid Purity Systems

HENEK HLV-1200

HENEK HLV-600

HENEK HLV-1200

Industries and Markets Served

713-644-5558 • www.HENEKUSA.com

HENEK Fluid Purity Systems, Inc. Houston, Texas USA

MADE IN THE USA