Upload
donhi
View
220
Download
4
Embed Size (px)
Citation preview
w w w . h i d a y a t h . c o m
Project Management of Supplies
HIDAYATHHIDAYATH
GROUP
Profile
HIDAYATH GROUP, based in Dubai, United Arab Emirates has recently set up a new division for project management of supplies of carbon steel, stainless steel, alloy steel packages and other industrial products to the oil, gas, chemical, petrochemical, marine, desalination and power industries. Project Management of supplies involves sourcing, managing and supplying packages to epc contractors , fabricators and end users as per the specific requirement of each project. The division is managed by well qualified and dedicated professionals with more than 20 years experience in handling project supplies to upstream, midstream and downstream industries. The aim of this division is to focus our technical expertise and many years of experience to source and supply industrial products through worldwide network of manufacturers and stockists at market friendly price. The division shall endeavour to provide a truly international and professional services and satisfy the demands of the customer base across a wide variety of industrial and engineering sectors. Our range of products include, but not limited to the following:1) Carbon Steel plates - offshore, structural, pressure vessel and shipbuilding grades.2) Carbon Steel sections.3) Carbon Steel welded & seamless tubulars.4) Carbon Steel fittings and flanges.5) High strength quenched and tempered plates & tubulars.6) Stainless Steel sheets and plates.7) Stainless Steel pipes & tubes8) Stainless Steel fittings and flanges.9) U-Tubes ( Carbon Steel and Stainless Steel)10) Heat exchanger tubes ( carbon steel & stainless steel)11) Square and rectangular hollow sections ( Carbon Steel & Stainless Steel)12) Hp profiles – bulb flats.13) Alloy pipes, fittings and flages.14) Weather resistant plates. All above products shall be supplied as per international standards and specific project specifications. In the event materials are not available as per project specification, we can suggest the closest alternative available grades meeting the technical requirement of the project. Additional tests and third party inspection can be organized wherever required.
Carbon Steel PlatesThe Supply Range of Carbon Steel Plates Includes the following:
Product Specification Grades Size Range
EN: 10025
ASTM-A-36/36M A-36 6mm To 150mm
ASTM-A-283 Grade C 6mm To 50mm
ASME-SA-516 / 516M 60/65/70 6mm To 100mm
ASME-SA-537 Class 1 & Class 2 6mm To 100mm
ASTM-A-572 Gr-50/55/60 6mm To 100mm
6mm To 150mm
S275JRS355JR / JO
S355J2S355K2
Carbon SteelStructural Plates
Carbon SteelPressure Vessel Quality
Carbon SteelOffshore Structural Grade
Shipbuilding QualityPlates
EN:10225 355, 420, 450 & 460 10mm To 150mm
ABS, BV, GL, LRS,NK, NV, KR, RI
A,B,D,EAH-32/36DH-32/36EH-32/36FH-32/36
6mm To 100mm
API-2H Grade 50/60 10mm To 150mm
API-2W Grade 50/60 10mm To 150mm
BS:7191 EM & EMZ 10mm To 150mm
Carbon Steel SectionsThe Supply Range of Carbon Steel Sections Includes the following:
Product Specification Grades Size Range
EN: 10025
ASTM-A-36 A-36
ASTM-A-572 Gr-50
W6 x 6To
W40 x12
152mm x 89mmTo
914mm x 419mm
S275JR / JOS355JR / JO
S355J2S355K2
EN: 10025
EN: 10025
EN: 10025
JIS:G3101 / G3106
203mm x 203mmTo
356mm x 406mm
S275JR / JOS355JR / JO
S355J2S355K2
S275JR / JOS355JR / JO
S355J2S355K2
S275JR / JOS355JR / JO
S355J2S355K2
SS400SS490
Universal Beems
Universal Columns
American Wide FlangeBeams (W-Sections)
European Wide FlangeBeams (HEA/HEB)
European Beam(IPE-Section)
Japanese Wide FlangeBeams
Europen Channels(UPN)
100mm To 1000mm
100mm To 600mm
100mm To 50mmTo
900mm x 300mm
EN:10025S275JR/JOS355JR/JO
British Paralel FlangeChannel (PFC)
102mm x 51mmTo
432mm x 102mm
EN:10025S275JR/JOS355JR/JO
80mm To 400mm
Carbon Steel TubularsThe Supply Range of Carbon Steel Tubulars Includes the following:
Product Specification Grades Size Range
ASTM-A-53 Grade - B
ASTM-A-106 Grade - B
1/2” To 24” NB
1/2” To 16” NB
API-5LGr-B / X-42 / X-52 /
X-60/ X-65/ X-70
ASTM-A-179 Grade A-1
1/2” To 24” NB
1/2” To 4” NB
ASTM-A-210 Grade A-1/C 1/2” To 5” NB
ASTM-A-333 Grade 6 1/2” To 24” NB
ASTM-A-53ASTM-A-671
Gr - B 1/2” To 48” OD
API-5LGr-B / X-42 / X-52 /
X-60/ X-65/ X-701/2” To 48” OD
Seamless Tubulars
Welded Tubular(ERW / SAW )
Carbon Steel Fittings & FlangesThe Supply range of Carbon Steel Fitiings & Flanges includes the follwoing:
Product Specification Grades Size Range
ASTM-A-234 WPB Up To 24”Butweld Fittings
ASTM-A-105 WPB 1/2” To 4”Forged Fittings
ASTM-A-105, A350 LFI, LF2LF3, CI1 / CI2
ASTM-A-694 F42, F46, F52, F56,F60, F65, F70
Up To 80”Flanges
Structural Hollow SectionsWe can supply wide range of hot finished and cold finished circular, square & rectangular Hollow Sections as per following specifications:
Product Specification Grades Size Range
EN:10219S275JOH
S275J2H
S355J2H
21.3mm O.D x 3.2mm WT
To
508mm O.D x 16mm WT
Circular Hollow
Sections
EN:10210
EN:10219
S275JOH
S275J2H
S355J2H
40mm x 40mm x 2.5mm
To
400mm x 400mm x 20mm
Square Hollow
Sections
EN:10210
EN:10219
S275JOH
S275J2H
S355J2H
50mm x 30mm x 3.2mm
To
500mm x 300mm x 20mm
Rectangular Hollow
Sections
Stainless Steel TubularsThe supply of Stainless Steel Tubulars includes the follwoing:
Product Specification Grades Size Range
ASTM / ASME - 213
ASTM / ASME - 269
ASTM / ASME - 312
EN: 10216 - 5
DIN: 17458
DIN: 17456
TP-304, 304L
304H, 316, 316L
316H, 316Ti,
321, 347, 310
Duplex UNS - 332760
S31803, S31500
6mm O.D
To
610mm O.D
Seamless Tubulars
ASTM / ASME - 219
ASTM / ASME - 269
ASTM / ASME - 312
ASTM / ASME - 688
DIN: 17458
DIN: 17457
EN: 10217-7
ASTM / ASME - A409
TP-304, 304L
304H, 316, 316L
316H, 316Ti,
321, 347, 310
Duplex UNS - 332760
S31803, S31500
6mm O.D
To
273.1mm O.D
Welded Tubular
Stainless Steel Fittings & FlangesThe Supply range of Stainless Steel Fitiings & Flanges includes the follwoing:
Product Specification Grades Size Range
ASTM / ASME - A403
ASTM / ASME - A815
WP-304,304L,304H,
316, 316L,321, 347,
310, 904L,
Duplex UNS - S32750,
S32760, S31803, S31500
1/2” To 48”Butweld Fittings
ASTM / ASME - A182
304,304L,304H,
316, 316L,347,310
Duplex UNS - S32750,
S32760, S31803, S31500
1/8” To 4”Forged Fittings
ASTM / ASME - 182
F304, 304L, 304H, 316,
316L, 316H, 321,347,
310.
F44, F45, F51, F53,
F55, F60, F61
Up To 80”Flanges
Stainless Steel “U” TubeThe Supply range of Stainless Steel “U” Tubes includes the follwoing:
Product Specification Grades Size Range
ASME / ASTM
SA - 249, 269, 312, 688
TP - 304, 304L, 304H,
316, 316L, 316H
6mm O.D
To
101.6mm O.D
EN: 10217 - 7 321, 347, 310,
UNS - S32760,
S31803, S31500
0.5mm WT
To
3.6mm WT
in 6M / 12M Lengths.
U-Tube ( Welded &
Seamless )
Alloy Pipes, Fittings and FlangesThe Supply range includes but not limited to the following:
Product Specification Grades Size Range
ASTM / ASME - A / SA / 335ASTM B 729
P1, P11, P5, P9P22 & P91
10S, 40S, 80S % 160S1/4” To 24”Seamless Tubulars
ASTM / ASME - A / SA / 691ASTM B 469
1-1/4Cr, 2-1/4Cr,5CR, 9CR10S, 40S
20” To 60”1/2” To 16”
Welded Tubulars
ASTM / ASME - A / SA / 234ASTM B 366
WP11, WP22, WP5,WP9, WP91
10S, 40S, 80S1/2” To 24”Butt Weld Fittings
ASTM / ASME - A / SA182ASTM B462
F11, F22, F5, F9 & F91150#, 300#
1/4” To 4”1/2” To 4”
Forged Fittings
ASTM / ASME - A / SA182ASTM B462
F11, F22, F5, F9 & F91150#, 300#
1/2” To 46”1/2” To 24”
Flanges
Tube SheetsThe Supply range includes but not limited to the following:
We can supply Carbon Steel and Alloy Steel Tube Sheets for Shell and Tube Heat Exchangers and large diameter
evaporaters.
The Tube Sheets can be supplied cut & machined from rolled plates, in as forged with rough machining, as forged
and final machining and/or final machined condition with hole drilled as per specific drawings.
Tube Sheets can be supplied to all major industrial specifications like BS EN & ASTM / ASME Standards.
All materials sold are fully traceable to the original mill test certificates. We also offer the following services:
* Ultrasound and liquid penetrant flow detection.
* Witnessing of material by Third Party Inspection Agency.
* Dimensionaltesting of machined items.
Finally, to ensure the product reaches the end user destination undamaged, all of the products are carefully
packaged in protective are carefully packaged in protective materials and seaworthy wooden boxes to prevent
damage during transit.
High Strength Plates & Tubulars ( TMCP/QUENCHED & TEMPERED )The Supply Range of Carbon Steel Tubulars Includes the following:
Product Specification Grades Size Range
HP Profiles - Bulb FlatsThe Supply Range of HP Profiles - Bulb Flats Includes the following:
The above bulb flats an be supplied in either “as rolled” (black) condition or “ short blasted” surface quality with a wide range of primers including zinc silicate or iron oxide.
Tolerances in acoordance with BS EN: 10067
Product Specification Grades Size Range
ABSDQ-51, DQ-56
EQ-51, EQ-56 & EQ-706mm To 100mm
EN: 10025-6460ML550 QL690 QL
10mm To 220mm
API - 5LX-60X-65X-70
4” To 24”
Plates
Classification societyLRS, ABS, DNV, BV,GL, RINA, NK, KR
A, B, D,A-32, A-36,D-32, D-36,E-32, E-36
60mm WidthTo
430mm Widthand Thickness
4mm To 20mmin 6m / 12m Lengths.
Bulb Flats
Tubulars
SERVICES - Flat Products ProcessesSERVICE PROVIDED MATERIAL SPECIFICATIONS
Mater ia l Thickness 0.5 - 3.0 mm Sta inless Steel Maximum Coi l Width: 1220 mm Maximum Coi l Weight : 8000Kgs
Mater ia l Thickness 0.5 - 3.0 mmCoi l Cut-To-Length G. I/ Aluminium Maximum Coi l Width: 1500 mm Maximum Coi l Weight : 5000Kgs
Mater ia l Thickness: 4.0 – 12.0 mm Sta inless Steel Maximum Coi l Width: 2,000 mm Maximum Coi l Weight : 20000Kgs
Coi l S l i t t ing Sta inless Steel Maximum Thickness: 5.0 mm Maximum Coi l Width: 1,500mm
Sheets Shear ing Sta inless Steel Maximum Thickness: 3.0 mm Maximum Cutt ing Length: 3,100 mm
Maximum Thickness: 4.0 mmLaser Cutt ing Sta inless Steel Maximum Width: 1,500 mm Maximum Length: 3,000 mm
Maximum Thickness: 50.0 mmPlasma Cutt ing Sta inless Steel Maximum Width: 3,000 mm Maximum Length: 12,000 mm
Maximum Thickness: 100.0 mmOxy Fuel Cutt ing Carbon Steel Maximum Width: 3,000 mm Maximum Length: 12,000 mm
Maximum Thickness: 50.0 mmWater- jet Cutt ing Sta inless Steel Maximum Width: 2,000 mm Maximum Length: 6,000 mm
Services
Punching (Sheet to Sheet) Sta inless Steel Maximum Thickness: 3.0 mm CNC Maximum Width: 1,500 mm Maximum Length: 3,000 mm
Punching (Sheet to Sheet) Sta inless Steel Maximum Thickness: 2.0 mm NC Maximum Width: 1220 mm Maximum Length: 2440 mm
Punching (Coi l to Coi l ) Sta inless Steel Maximum Thickness: 1.0 mm Maximum Width: 1,250 mm
Galvanized I ron Maximum Thickness: 1.2 mm Maximum Width: 1,250 mm
Aluminium Maximum Thickness: 1.5 mm Maximum Width: 1,250 mm
Blanking – Drawing Sta inless Steel Eccentr ic Presses: max 1,600 kN Hydraul ic Presses: max 3,000 kN
Rol l ing Sta inless Steel Maximum Thickness: 26.0 mm Maximum Width: 3,000 mm
Turning – Mi l l ing Sta inless Steel Maximum Bar Diameter : 76.0 mm
Vert ical Mi l l ing Sta inless Steel Pal let S ize: 860 x 560 mm
Tube Diameter : 12.0 – 76.2 mmTube Bending Sta inless Steel Wal l Thickness: max 3.0 mm Minimum Bending Radius: R = D
Free Radi i Tube Bending Sta inless Steel Maximum Diameter : 50.8 mm
Tubes – Sol id Bars Cut-to-Length Sta inless Steel Maximum Diameter : 408.0 mm
SERVICE PROVIDED MATERIAL SPECIFICATIONS
SERVICES - Round Parts ProcessesSERVICE PROVIDED MATERIAL SPECIFICATIONS
Services
SERVICE PROVIDED MATERIAL SPECIFICATIONS
Investment Cast ing Sta inless steel Maximum cast ing weight : 10 Kg
Mirror Pol ishing Sta inless Steel Sat in Sta inless Steel Hair l ine Sta inless Steel PVD Color ing Sta inless Steel Gold, Bronze, Copper, BlackPattern Etching Sta inless Steel Embossing Sta inless Steel Leather, L inen, 5WL, Chequered, DimpleBead Blast ing Sta inless Steel V ibrat ion Sta inless Steel Marble F inishing Sta inless Steel Ant i-F inger Pr int Sta inless Steel P ick l ing – Pass ivat ion Sta inless Steel
MIG Sta inless Steel Carbon Steel 400 ATIG Sta inless Steel 200 ASAW Sta inless Steel Carbon Steel 1000 A Boom 4 m x 4 m
ARC Sta inless Steel Carbon Steel 400 A
Cold ARC Sta inless Steel Carbon Steel 400 A
Orbita l Sta inless Steel 200 A Maximum Diameter 76.2 mm
SERVICES - Free Form Parts Processing
SERVICES - Surface Finish / TreatmentSERVICE PROVIDED MATERIAL SPECIFICATIONS
WELDING SERVICE PROVIDED MATERIAL SPECIFICATIONS
Services
certificate
Certificate
Certificate
Certificate
Certificate
Certificate
Commitment to customer satisfaction is not just another statement at HIDAYATH
GROUP, it is the result of awareness and dedication of our highly trained employees
and management, who as a team, know and understand your business and your re-
quirements. To achieve this standard of excellence, as an ISO 9001 certified company,
we adhere to the most stringent industrial standards for quality control to ensure that
all of our products meet your specifications. Our staff upholds a strong internal tradi-
tion, through experience, for innovative and reliable performance.
Quality Policy
For enquiries on Project Management of SuppliesHidayath Heavy Industry LLCP O Box 13650Dubai Industrial City, Dubai, UAET. +971 4 885 6979. F. +971 4 885 [email protected], [email protected]