Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
KaleidoscopeFinished Quilt Size 42” x 42”
Yardage: 12 Fat Quarters 1 1/3 Yards black print
1/2 Yard binding 2 3/4 Yard backing
Supplies:Basic rotary cutting supplies
Light and dark marking pencilsMatching thread
Basic sewing machine and supplies
Project features fabrics fromFlorabunda! Collection
byRJR Fabrics
The information in this pattern is presented in good faith. Every effort has been taken to assure the accuracy herein. This pattern may not be reproduced in any form, either electronic or hard copy. The finished product may not be used for mass retail, commercial, or wholesale purposes, markets, or trade shows without written permission.
© 2018 Ramona Sorensen
KaleidoscopeKaleidoscope
42” x 42”
Designed bySara Mika
featuring fabric collections from
Kaleidoscope-- Cutting:
Blocks:Draw a diagonal line on the wrong side of all the print squares. Pair each print square with a black square, right sides together. Stitch a 1/4” from each side of the drawn line. Press to set the seams.
Cut along the drawn line. Press seams towards the black fabric. Trim squares to 3 1/2” x 3 1/2”.
Cut 11 strips at 4” x WOF (width of fabric). Cut 102 squares at 4” x 4”.
Cut 4 strips at 4” x WOFQ (width of fat quarter). Cut 20 squares at 4” x 4”.
Cut 2 strips at 4” x WOFQ. Cut 6 squares at 4” x 4”
Cut 2 strips at 4” x WOFQ. Cut 7 squares at 4” x 4”
Cut 3 strips at 4” x WOFQ. Cut 10 squares at 4” x 4”.
Cut 1 strip at 4” x WOFQ. Cut 4 squares at 4” x 4”.
Cut 3 strips at 4” x WOFQ. Cut 9 squares at 4” x 4”.
Cut 2 strips at 4” x WOFQ. Cut 5 squares at 4” x 4”.
Cut 2 strips at 4” x WOFQ. Cut 5 squares at 4” x 4”.
Cut 3 strips at 4” x WOFQ. Cut 9 squares at 4” x 4”.
Cut 2 strips at 4” x WOFQ. Cut 5 squares at 4” x 4”
Cut 4 strips at 4” x WOFQ. Cut 14 squares at 4” x 4”.
Cut 2 strips at 4” x WOFQ. Cut 8 squares at 4” x 4”.
Cut 5 strips at 2 1/2” x WOF. Set aside for binding.
Each black and print pair will make 2 half square triangle blocks.Make 204 blocks.You will use 196 blocks.
©2018 Ramona Sorensen page 1
Quilt Assembly:Arrange blocks according to diagram, or as desired, into 14 rows with 14 blocks per row.
Stitch blocks together into rows using a 1/4” seam. Press seams open.
Stitch rows together using a 1/4” seam. Press seams open.
Quilt should measure about 42” x 42”.
Finishing:Prepare binding as desired using the reserved 5 fabric strips.
Cut backing fabric into 2 pieces at 49” x WOF (width of fabric). Trim selvages from fabric. Stitch backing pieces together along the longer edges using a 1/4” seam. Press seam to one side. Back should measure 49” x 86”.
Layer backing, batting, and quilt top. Baste layers together. Quilt and finish as desired.
©2018 Ramona Sorensen page 2