Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
technical
Lockers
LockersAs workplaces are becoming far more agile and activity-based, the need for dynamic storage systems continues to grow.The Schiavello locker range allows the office space to be transformed through an adaptable, innovative, practical and reliable storage system. With key, combination, or full electronic management, Schiavello lockers offer a solution for every workplace.
Indexconstruction 02construction/locks 03vecos electronic locker system 04vecos hardware 05–07doors 08product specifications 09
lockers _01
lockers _02
Constructionlocker carcass I terminal carcass
code PLC-4A-350 code PLC-3A-350 code PLC-3B-350 code PLC-2A-350 code PLC-1A-350
1800 mm
350 mm 500 mm
Lockers with an 1800 mm carcass have a final overall height of 1925 mm high (includes100 mm kicker and 25 mm shroud)
PLC-4A-450 PLC-3A-450 PLC-3B-450 PLC-2A-450 PLC-1A-450
LOCKER CARCASS The locker carcass is constructed from 16 mm white laminate with a matching 1 mm ABS edge. Available in 2 standard widths, 350 mm and 450 mm. Carcass height is 1800 mm not including the kicker or shroud.Shrouds available_25 mmStandard kicker_100 mmOverall standard height_1925 mm
Reverse sprung hinges and cable channel come standard with every carcass. Compatible with V1 or V2 locks, Locks and wiring listed seperately. Locker 350 mm wide_internal width 315 mmLocker 450 mm wide_internal width 415 mmLocker 500 mm deep_internal depth 445 mm
TERMINAL CARCASS The terminal carcass is constructed from 16 mm white laminate with a matching 1 mm ABS edge. Carcass width is 250 mm and the height is 1800 mm, not including the kicker or shroud.Cable access is through the base with a 100 mm diameter cutout.
TERMINAL CARCASS ACCESS The terminal carcass has a removable front which can be locked.Terminal faces are available in a wide range of finishes, please see the door section for a full description of the options available.
1800 mm
250 mm 500 mm
Note: Terminals can be mounted in other places, one locker in a block could be used as a terminal housing.
100 mm cable access hole
terminal carcasskey lock terminal carcass front face
lockers _03
Construction I Locksshrouds + kickers I cam locks
SHROUDS + KICKERS Shrouds are constructed from 25 mm laminate with a 1 mm ABS edge strip.Shrouds do not include a back panel and come standard with a 100 mm kicker. The kicker is detachable via plastic clips, to allow access to the wiring, and locked in place prior to the completion of the installation.
KEy CAM LOCKS Solid metal 3/4” cam lock with master key
ELECTRONIC I BATTERy COMBINATION LOCK - MINIK10MiniK10 electronic cabinet locks feature a master/manager code, one-time-use functionality and up to 10 years battery life. It can be installed vertically or horizontally and either right or left handed. The MiniK10 has three potential password levels and can operate in two different modes, single user or multiple user.
COMBI-CAM LOCKSSolid metal combination cam lock with master key override. 3/4 “ keyed cam lockDual access, key or combination
Adjustable leveling feet are supplied with the shroud and fitted on site. Two feet sit between each carcass and at either end of the run. Guide holes are provided. Standard shroud height_1925 mm
code PLS-1450 - (350 x 4) + 50 (2 ends)
PLS-1700 - (350 x 4) + 250 + 50 (2 ends)
PLS-1800 - (350 x 5) + 50 (2 ends)
PLS-1850 - (450 x 4) + 50 (2 ends)
PLS-2050 - (350 x 5) + 250 + 50 (2 ends)
PLS-2100 - (450 x 4) + 250 + 50 (2 ends)
PLS-2150 - (350 x 6) + 50 (2 ends)
PLS-2300 - (450 x 5) + 50 (2 ends)
PLS-2400 - (350 x 6) + 250 + 50 (2 ends)
PLS-2550 - (450 x 5) + 250 + 50 (2 ends)
STANDARD 25MM SHROUDS1925 mm high x 500 mm deep (special sizes available upon request)
adjustable feet placement
RF/ID
ReaderR
F/ID
Rea
der
lockers _04
Vecos Electronic Locker Systemvecos introduction I vecos terminals
The Vecos electronic locker system is a highly refined complete locker management solution. Designed in the Netherlands and sold throughout Europe, the Vecos system is well established as a market leader.
Available in 2 versions, the V1 and the V2. The V1 system is an affordable dynamic locker system while the V2 is the top of the line complete locker management system.
The V1 system is terminal based, features a push release mechanism, a USB port and internal lighting.
The V2 system features a card reader and a status indicator light in every door as well as a push release mechanism, USB port and internal lighting. The V2 system can be run with or without a terminal.
Both systems connect across a network and are controlled by the Vecos Smart Access software on a windows server. The Vecos system is very adaptable and can support numerous forms of card readers and other identification methods such as barcode, pin code and NFC. Please contact Schiavello with yourspecific requirements.
VECOS ELECTRONIC LOCKER SySTEM (HARDwARE)TERMINALS_TOUCH SCREEN V1 locks - maximum 512 locks per terminal V2 locks - maximum 256 locks per terminal Terminals support a maximum of 7000 users
SUppORTED READERS No reader attached, so keyboard mode activated 9600 baud, any reader that sends the code at 9600 baud with CR/LF (Vecos standard) BE, the BVE number in the Mifare card HW-578, specific Mifare reader iCode 1/2, specific iCode reader (OMRON V720SHMC73) MCR-HID, HID reader using the clock data interface TC65, GSM modem attached to the reader port in AT mode (SMS), (the SMS sender number is the badge number) ATS1192, Weigand Weigand 4, 6, 8, 10, 12 bytes, general lengths BVE, reads the BE number of a protected Mifare card/sector PRS 5/2 MCR Reader, Pfister reader (ATPS) 9600 baud Hex2Dec, converts the 10 hexadecimal characters to a decimal number Mc POS, Magna Carta POS reader for payment characters to a decimal number 9600NRI, any reader on 9600 baud and the NRI Coin Totalizer
Terminals can be stand alone or online - online requires a web server (pc), smartaccess web application and a TCP/IP connection. code PLT-NRF code PLT-WRF
196 mm
touch screen touch screen
196 mm
147 mm 147 mm
Terminals have 4 modes
STATIC_One user can have 1 locker
DyNAMIC_A user can request a free locker and open it later (locker stays assigned to the user), or open and free the locker (the same locker can’t be opened by the user again, as the locker will be used for a user who requests a free locker).
MIxED_The combination of Static and Dynamic.
MAILBOx_One user can have multiple lockers and multiple users can have one locker.
A locker can be opened by using a badge reader or by using a pincode (max. 20 positions) in combination with a locker number (meaning the user needs to remember both the pincode and locker number).The terminal supports the POS protocol for payment.During power loss, no information will be lost, everything is stored in eeprom and flash memory, no internal battery required.Terminal facing - Stainless Steel.Terminals are available with or without the RF/ID Reader.
lockers_05
Vecos Hardwarehubs I v1 I v2
HUBSHubs are installed at floor level behind the detachable kicker rail. The hub connects the locks with the terminal, windows P/C and SmartAccess software. Colored wiring allows the cabling to be identified. All lockers at the same height are given the same colored wires.
V1 HUB16 outs for 16 V1 locks (each V1 lock connects directly back to the hub).The terminal can support 32 V1 hubs giving a maximum of 512 locks per terminal.
V2 HUB8 outs for a maximum of 24 V2 locks (V2 locks daisy chain, maximum of 6 locks per chain).The terminal can support a maximum of 256 V2 locks.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
code PHV1-16
code PHV2-8
lockers _06
Vecos Hardwarev1 + v2 locks I power supply I ups
240V pOwER SUppLy The power supply connects to the Hubs which then supply the power to the individual locks and to the Terminal.
1 small power supply (27v/7.5A) can power 100 V1 locks or 32 V2 locks 1 large power supply (27v/18A) can power 300 V1 locks or 100 V2 locks
UpS I UNINTERRUpTED pOwER SUppLy A battery backup for power outages:
1 small power supply (27v/7.5A) can power 100 V1 locks or 32 V2 locks 1 large power supply (27v/18A) can power 300 V1 locks or 100 V2 locks
V1 + V2 LOCKSThe Vecos electronic locks are available in 2 versions, V1 and V2. Both locks feature internal lighting and a USB port. The door catch is designed to release a door and then if unopened it will re-engage the lock. The hinges of the door are on the right hand side, and the left side opens. Vecos locks are not available with hinges on the left hand side.
The V2 includes a card reader with each lock, allowing lockers to be scanned at the door. There is also a status indicator light set in the door. V2 locks can be run off a terminal or as “stand alone,” no terminal required.V1 locks must be scanned at a terminal and have no status indicator light.
V1 V2
door status indicator lightwith card reader
LED lighting
USB portoutput
5V 600 mA max
code PHV2-8
PLPS-18
RF/ID
ReaderR
F/ID
Rea
der
lockers _07
Vecos Hardwarecomputer I server requirements I general hardware configuration
COMpUTER I SERVER REqUIREMENTSThe Vecos Smart Access locker system is a complete locker management system communicating across a network connected to a webserver. The webserver is a part of the Smart Access application.
GENERAL HARDwARE CONFIGURATIONThere are many configuration options with the Vecos locks. The below diagram is an example of the basic configuration.
KEy qUESTIONSWho is supplying and supporting the web server?Is remote access possible?What type of swipe card is being used? Provide a sample if possible.
INSTALLATION SUppORTSoftware updates at: http://support.vecoseurope.nl/SmartAccess/RevisionHistory.html
RECOMMENDED SySTEM REqUIREMENTS (HARDwARE)Microsoft Windows Server 2008 Std R2 64 bitsXEON CPU at 2+ Ghz4GB RamRAID 1,5,10 with 10GB Hard disk free space
RECOMMENDED SySTEM REqUIREMENTS (SOFTwARE)Internet Information Services (IIS).NET Framework 2.0 (and the 3.5.1 updates)ReportServer 2008 SP1Database compatible with either SQL Server 2005, 2998 or 2012Team Viewer (please confirm remote access is possible, may vary from company to company)Backup solutionAntivirus
locks
HUB
240V pOwER SUppLy
UpSUninterrupted Power Supply
(battery backup approx. 2 hours)
TERMINAL
LAN(TCP/IP) network
p/C(windows)
with SmartAccess app
lockers_08
Doorsdoors I vents I accessories
DOORSDoors are available in 18 mm laminate or 18 mm powder coated MDF. Veneers and metal doors are available upon request. Laminate doors feature a 1 mm hard ABS edge. Powder coated doors can more easily incorporate cutouts and irregular shapes. Vecos doors must have the hinges on the right hand side. Doors for V2 locks also include a status indicator light.
DOOR NUMBERING
LAMINATE/VENEER_In most cases numbering will be a printed tag made from aluminium and produced to order.
pOwDER COATED_Can have the number routed into the door at 1 mm deep and 40 mm high, standard top left corner. We use a standard Schiavello font as shown below.(Please note: other fonts may not be available, contact Schiavello with your specific request).
VENTS + ACCESSORIESThe standard Prima Vent, 240 mm x 85 mm, is a powder coated or anodised aluminium vent with 12.7 mm x 3.35 mm capsule shaped perforations.Names, numbers and paper trays can all be incorporated onto the doors, please contact Schiavello for full details.
DOOR TypE Asolid
DOOR TypE Asolid with light
DOOR TypE Bletterbox
DOOR TypE Cmailbox
DOOR TypE Asolid with vent
Indicator LightNote: For V2 locks only
VECOS V2 wITH TERMINAL16 lockers fitted with Vecos V2 electronic locks. Includes terminal and status indicator lights to each door with a standard 25 mm laminate shroud.
VECOS V1 wITH TERMINAL, VENTS + NUMBERS16 lockers fitted with Vecos V1 electronic locks with a terminal. Powder coated doors with machined numbers and vents to each door.
product specificationsgeneral I construction I finishes I accessories I warranty
General Schiavello Lockers are a fully refined locker system manufactured in Australia by Schiavello. Supplied as a standard laminate carcass and available with a range of configurations and sizes as well as many options on door styles, finishes, lock types and accessories.
There are multiple options for lock types including key, combination, swipe card or the complete network based system, the European VECOS electronic lock management system with swipe card technology and touch screen terminals.
The Vecos locker system is a highly evolved and proven electronic locker management system utilising RFID scanning technologies and network capabilities to allow one central hub for monitoring and maintaining 1000s of lockers and users.
ConstructionThe locker carcass is constructed from 16 mm melamine with 2 mm hard ABS edges. Cable channelling is machined down either side of the carcass allowing all cables to be concealed. The carcass is supported with adjustable feet hidden behind a 100 mm kicker rail.
Available with varying lock types, key, combi-cam, combination electronic (battery), see page 4, or the full Vecos electronic network solution, page 5.
FinishesLaminate carcass with a choice of laminate, metal, powder coated or veneer doors.
Shrouds and doors can be customised to customer requirements but are generally either laminate or powder coated MDF. Standard shroud thickness 25 mm, laminate shrouds have a 2 mm hard ABS edging.
Veneers and metal doors can also be incorporated for premium installations. Laminate doors feature a 1 mm hard ABS edging. Doors can incorporate vents, letter slots, cutouts and machined numbering depending on the finishes. Please see page 8 for full door options.
Panels may be to full desk width or shorter as required.Standard panel height 460 mm (overall height from floor 1200 mm) Other heights as required.
FeaturesVecos locks feature a unique push release system enabling lockers to be released and if not opened re-locked. Locks feature internal lighting and a USB port. V2 locks include their own card reader allowing lockers to be scanned at the door. The V2 system can be run with or without terminals. The V1 system must have a terminal.
The Vecos system is very adaptable and can support numerous forms of readers and other identification methods such as barcode, pin code and NFC. Please contact Schiavello with your specific requirement.
AccessoriesShelves, vents, letter slots, numbering and cutouts can all be incorporated. Please contact Schiavello with your specific requirements.
warrantyCabinetry:Vecos Lockers are covered by a standard Schiavello 5 year warranty against faulty materials and workmanship that includes a guarantee to supply parts of all standard components and service for a period of no less than 10 years from date of installation.
Electronics:Vecos electronic hardware is covered by a 12 month warranty on new materials and 3 months on software.Please refer to the Schiavello Vecos Service Level Agreement (SLA) for full details of the services and terms of warranty.
schiavello.com/locker-solutions SCH/TLOC01-A
Schiavello Group Pty Ltd reserves the right to change any or all details without prior notice. All dimensions stated within this document are nominal and/or approximate only and subject to variation.
Melbourne Head OfficeSchiavello (Vic) Pty Ltd1 Sharps RoadTullamarine VIC Australia 3043T: 61) 3 9330 8888F: 61) 3 9330 8899
Melbourne ShowroomSchiavello (Vic) Pty LtdMetropol8 Whiteman StreetSouthbank VIC Australia 3006T: 61) 3 9674 1500F: 61) 3 9674 1650
AdelaideSchiavello (SA) Pty LtdGround Floor, 101 Currie StreetAdelaide SA Australia 5000T: 08) 8112 2300F: 08) 8231 1419
BrisbaneSchiavello (Qld) Pty Ltd265 Coronation DriveMilton QLD Australia 4064T: 07) 3368 3388F: 07) 387602130
CanberraSchiavello (ACT) Pty Ltd2-6 Collie StreetFyshwick ACT Australia 2609T: 02) 6124 0500F: 02) 6280 4370
PerthSchiavello (WA) Pty Ltd1315 Hay StreetWest Perth WA Australia 6005T: 08) 9420 6588 F: 08) 9322 1337
SydneySchiavello (NSW) Pty Ltd69 Campbell StreetSurry Hills NSW Australia 2010T: 02) 9211 3311F: 02) 9212 3788
SingaporeSchiavello Singapore Pte LtdNo.1 Magazine Road#01-05 Central MallSingapore 059567T: 65) 6533 8011F: 65) 6533 2811