Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
18
Logic Plus wiring devices from MK Electric have beendesigned to perfectly complement modern interiors,offering an unobtrusive and sophisticated look totally inkeeping with today’s design. Technically, they exceedBritish Standard requirements with patented features thatmake these products the most advanced and safestavailable.
They are easy to install and available through our extensivedistributor network.
The range is backed by MK’s quality and reliability andprovides the largest selection of wiring devices in anysingle range.
Modern stylingSmoothly formed front plates, rounded rocker switches and chamferedradius corners
Total safety3-pin operated “child resistant shutter system”, which is designed toinhibit access to the electricity supply, unless all 3 pins of a standardBritish 13 Amp plug are in position
Unrivaled quality and reliabilityProducts are made from the very best materials and are 100% tested
Quick and easy to installIn-line terminals and backed out, captive screws feature
Outstanding rangeLarge selection of wiring devices providing a total solution
20 year guaranteeGives total peace of mind to you and your customers (10 years ElectronicDevices)
wiring devices | white www.mkelectric.co.uk
range introduction feature benefits
Logic Plus™
19
technical hotline +44 (0)1268 563720 white | wiring devices
Logic Plus
Simple but effective screwless cord grip
on connection units – securely holds the
cable
Combined TV, FM, satellite and
telephone sockets save on installation
time and space
TERMINAL SCREWS
Backed out and held captive within
the terminal housing
IN-LINE TERMINALS
Allow wire to be cut stripped to the same length
FUNNEL ENTRANCE TO TERMINALS
Terminals are upwards facing to make
installation easier
TERMINAL MARKINGS
Clearly marked on all
rear mouldings
Outboard rockers on switchsockets
reduce the likelihood of accidentally
switching appliances on or off
TASTEFUL WHITE, HIGH GLOSS, HIGH QUALITY
THERMOSET MATERIAL
Maintains appearance and resists scratching
DOUBLE POLE SWITCHING
Switches both live and neutral (neutral makes first, breaks
last) means added safety for the user
OPTIONAL NEON INDICATOR SHOWS
WHEN SWITCH IS ON
3mm SWITCH CONTACT GAP
CONTOURED TO
BLEND INTO THE
WALL
3-PIN “CHILD RESISTANT
SHUTTER SYSTEM”
Designed to inhibit access to the
electricity supply, unless all 3 pins of
a standard British 13 Amp plug are in
position
DUAL EARTH TERMINALS
Available for installations that require
high integrity earthing
20
wiring devices | white www.mkelectric.co.uk
Logic Plus
SpecificationNotes
The 3 pin operatedsafety shutter makesLogic Plus sockets thesafest available
Terminals are groupedin-line with terminalscrews backed outready for easy wiring.Clear marking on darkbackground makes theterminals easilyidentifiable
All products areguaranteed for 20years (10 years formains operatedelectronic devices)
Many sockets arefitted with two earthterminals to providehigh integrity earthing
The 3 gangswitchsocket providesextra outlet options inthe home and office
Frontplates arechamfered at the topwith radiused corners
SwitchsocketOutlets
13 AMPFLUSH
MOUNTING BOXESFLUSH: 25mm 1 GANG: 861 ZIC 2 GANG: 862 ZIC 3 GANG: K863 FLUSH: 35mm (forextra wiring space)1 GANG: 866 ZIC 2 GANG: 886 ZICSURFACE1 GANG: K2140 WHI2 GANG: K2142 WHI3 GANG: K2153 WHI
DIMENSIONS:1 gang: 86 x 86mm2 gang: 86 x 146mm3 gang: 86 x 206mmFIXING CENTRES:1 gang: 60.3mm2 gang: 120.6mm3 gang: 180.9mmBS.1363 Pt.2: 1995
K2757 WHI K2757 GRA 1 GANG DPWITH DUAL EARTH TERMINALS
K2757 D1 RED1 GANG DPWITH RED FRONTPLATE, RED ROCKER AND DUAL EARTH TERMINALS
K2747 WHI 2 GANG DP
K2657 WHIK2657 GRA1 GANG DP WITH NEON AND DUAL EARTH TERMINALS
K2657 D1 RED1 GANG DPWITH RED FRONTPLATE, RED ROCKER, NEON AND DUAL EARTH TERMINALS
K2647 WHI2 GANG DP WITH NEONS
5
5
1010
10
5
1010
High integrity earthing
K2757, K2657 and K2737 are fitted with two earth terminals to provide adouble earth facility for use when installations are tocomply with Section 607 of BS.7671, IEE WiringRegulations
K273713 amp fuse protects all three outlets
K2757 D1 WHI1 GANG DPWITH RED ROCKERAND DUAL EARTH TERMINALS
K2747 D1 WHI2 GANG DP WITH RED ROCKERS
K2747 D1 RED2 GANG DPWITH RED FRONTPLATE ANDRED ROCKERS
K2737 WHI3 GANG DPWITH DUAL EARTH TERMINALS
5
5
5
10
K2757 GRA K2757 D1 RED
K2747 WHI
K2657 WHI K2657 D1 RED
K2737 WHI
K2757 D1 WHI
K2747 D1 WHI
K2747 D1 RED
K2647 WHI
21
technical hotline +44 (0)1268 563720 white | wiring devices
Logic Plus
SwitchsocketOutlets
WITH OUTBOARD
ROCKERS
13 AMP
FLUSH
RCD PROTECTED
13 AMP
FLUSH
FILTERED
13 AMP
FLUSH
MOUNTING BOXESFLUSH: 862 ZIC (25mm) 886 ZIC (35mm for extra wiring space)SURFACE: K2142 WHI K2746 and K2746 D1 are fitted with two earth terminals to provide a double earth facility for use when installations are to comply with Section607 of BS.7671, IEE Wiring RegulationsK2746 CE is provided with facility for ‘clean earth’ connectionDIMENSIONS: 86 x 146mmFIXING CENTRES:120.6mmBS.1363 Pt.2: 1995 (K2746) and where relevant for K2746 CE
K2746 WHIK2746 GRA2 GANG DP WITH OUTBOARD ROCKERS AND DUAL EARTH TERMINALS
K2746 CE WHI2 GANG DP WITH OUTBOARD ROCKERS AND ‘CLEAN EARTH’ FACILITY
K2476 WHIK2476 GRA2 GANG DP WITH OUTBOARD ROCKERS DUAL EARTH& NEONS
K2476 CE WHI2 GANG DP WITH OUTBOARD ROCKERS,NEONS AND ‘CLEAN EARTH’ FACILITY
5
5
5
5
10
10 K2746 D1 WHIK2746 D1 RED2 GANG DP WITH RED OUTBOARD ROCKERS AND DUAL EARTH TERMINALS
K2476 D1 WHIK2476 D1 RED2 GANG DP WITH RED OUTBOARD ROCKERS, NEONSAND DUAL EARTH TERMINALS
K2746 D2 WHI2 GANG DP WITH GREEN OUTBOARD ROCKERS ANDDUAL EARTH TERMINALS
5
5
5
5
5 K6211 WHI2 GANG10mA RATED TRIPPING CURRENTACTIVE CONTROL CIRCUIT
K6231 WHI2 GANG30mA RATED TRIPPING CURRENTACTIVE CONTROL CIRCUIT
K6233 WHI2 GANG30mA RATED TRIPPING CURRENTPASSIVE CONTROL CIRCUIT
1
1
1
MOUNTING BOXESFLUSH: 886 ZIC - 35mm deepSURFACE: K2140 WHI, 30mm deepEarth pin operated shutter.These a.c. and pulsating d.c. fault current sensitive products have up to 15mm thickfrontplates and are suitable for boxes with 30mm min. depth and supply voltagesof 240V 50Hz.A 25mm deep box (862 ZIC) can be used but conduit entry is restricted.Refer to Sentrysocket section, page 260, for more information on active and passivecontrol circuits.DIMENSIONS: 86 x 146mmFIXING CENTRES: 120.6mmBS.7288: 1990 All units are a.c. and pulsating d.c. fault current sensitive devices.Maximum total load 13 amps
K6100 WHI1 GANG10mA RATED TRIPPING CURRENTACTIVE CONTROL CIRCUIT
K6300 WHI1 GANG30mA RATED TRIPPING CURRENTACTIVE CONTROL CIRCUIT
K6303 WHI1 GANG30mA RATED TRIPPING CURRENTPASSIVE CONTROL CIRCUIT
1
1
1
MOUNTING BOXESFLUSH: 886 ZICSURFACE: K2172 WHIK1816 provides filtering to reducevoltage spikes only. K1826 provides two way filtering toreduce voltage spikes and radiofrequency interference on the mains.Protected by thermal cut-out.
K1816 WHI2 GANG DP SPIKE
K1816KOWHI2 GANG DP SPIKE WITH TAMPERPROOF SCREW
K1826 WHI2 GANG DP SPIKE AND RFI
K1826KOWHI2 GANG DP SPIKE AND RFI WITH TAMPERPROOF SCREW
K1800 WHIREPLACEMENT FILTER CASSETTE
5
1
1
1
1
K2746 WHI K6100 WHI
K6300 WHI
K6211 WHI
K6233 WHI
K1816 WHI
K1826 WHI
K1800 WHI
K2476 WHI K2746 D2 WHI
K2476 GRA
K2746 GRA
K2746 D1 WHI
K2746 D1 RED
K6231 WHI K6303 WHI
22
wiring devices | white www.mkelectric.co.uk
Logic Plus
SwitchsocketOutlets
ROUND PINFLUSH
SocketOutlets
13 AMPFLUSH
ROUND PINFLUSH
15 AMP127VFLUSH
AMOUNTING BOXES
FLUSH: 861 ZIC (25mm)866 ZIC (35mm for extra wiring space)
SURFACE: K2140 WHI
DIMENSIONS:86 x 86mm
FIXING CENTRES:60.3mm
BS.546: 1950
K2891 WHI1 GANG5 AMP DP SHUTTERED
K2893 WHI1 GANG15 AMP DP SHUTTERED
K2493 WHI1 GANG15 AMP DP SHUTTERED WITH NEON
10
10
10
MOUNTING BOXESFLUSH 25mm1 GANG: 861 ZIC 2 GANG: 862 ZICFLUSH 35mm (for extra wiring space)1 GANG: 866 ZIC 2 GANG: 886 ZICSURFACE 1 GANG: K2140 WHI 2 GANG: K2142 WHIK781 is fitted with two earthterminals to provide a double earthfacility for use when installationsare to comply with Section 607 ofBS.7671, IEE Wiring RegulationsDIMENSIONS: 1 gang: 86 x 86mm2 gang: 86 x 146mmFIXING CENTRES: 1 gang: 60.3mm 2 gang: 120.6mmBS.1363: Pt 2: 1995
K780 WHI1 GANG
K781 WHIK781 RED2 GANGWITH DUAL EARTH TERMINALS
5
5
10
MOUNTING BOXES
FLUSH: 861 ZIC (25mm)866 ZIC (35mm for extra wiring space)
SURFACE: K2140 WHI
DIMENSIONS:86 x 86mm
FIXING CENTRES:60.3mm
BS.546: 1950
K770 WHI1 GANG2 AMP SHUTTERED
K771 WHI1 GANG5 AMP SHUTTERED
K772 WHI1 GANG15 AMP SHUTTERED
10
10
10
MOUNTING BOXES
FLUSH 25mm 1 GANG: 861 ZIC2 GANG: 862 ZIC
FLUSH 35mm (for extra wiring space)1 GANG: 866 ZIC2 GANG: 886 ZIC
SURFACE1 GANG: K2140 WHI2 GANG: K2142 WHI
DIMENSIONS:1 gang: 86 x 86mm2 gang: 86 x 146mm
FIXING CENTRES:1 gang: 60.3mm2 gang: 120.6mmSSA: 444: 1985
K2251 WHI1 GANGSHUTTERED(NON UK)
K2252 WHI2 GANGSHUTTERED(NON UK)
5
10
K2891 WHI
K2893 WHI
K2493 WHI
K781 WHI
K781 RED
K780 WHI K770 WHI
K771 WHI
K2251 WHI
K2252 WHI
K772 WHI
NON STANDARD 13 AMP FLUSH
MOUNTING BOXESFLUSH 25mm 1 GANG: 861 ZIC 2 GANG: 862 ZICFLUSH 35mm (for extra wiring space)1 GANG: 866 ZIC 2 GANG: 886 ZICSURFACE1 GANG: K2140 WHI 2 GANG: K2142 WHIThese products are provided withfacilities for ‘clean earth’ connectionand are suitable for non standard plugswith ‘T’ shaped earth pin.DIMENSIONS: 1 gang: 86 x 86mm2 gang: 86 x 146mmFIXING CENTRES: 1 gang: 60.3mm2 gang: 120.6mmBS.1363 Pt.2: 1995 where relevant
K1257 WHI1 GANG DP
K1246 WHI2 GANG DP
K1257 D1 WHI1 GANG DP WITH RED ROCKER
K1246 D1 WHI2 GANG DP WITH RED ROCKERS
K1246 D1 RED2 GANG DP WITH RED FRONTPLATE AND RED ROCKERS
5
5
10
5
10
K1246 WHI
K1257 D1 WHI
K1246D1WHI
K1257 WHI
23
technical hotline +44 (0)1268 563720 white | wiring devices
Logic Plus
SocketOutlets
16 AMP2P + E FLUSH
Three Pole Fan Isolator
10 AMPFLUSH
ShaverSocket Outlet
FLUSH
ShaverSupply Units
FLUSH
MOUNTING BOXESFLUSH: (35mm)1 GANG: 866 ZIC2 GANG: 886 ZICSURFACE: 1 GANG: K2031 WHI2 GANG: K2172 WHIThese products are not suitable forinstallation in 25mm boxesDIMENSIONS:1 gang: 86 x 86mm2 gang: 86 x 146mmFIXING CENTRES:1 gang: 60.3mm2 gang: 120.6mmIEC 60884-1: 2002
K4150 WHI1 GANG16 AMP 250V SHUTTERED(NON UK)
K4152 WHI2 GANG16 AMP 250VSHUTTERED(NON UK)
5
10
MOUNTING BOXES
FLUSH: 3995 ZIC
SURFACE: K2160 WHI
For local isolation of fans with orwithout timers for repair or routinemaintenance.
DIMENSIONS:86 x 86mm
FIXING CENTRES:60.3mm
BS EN. 60947-3: 1992
K4857 WHIWITH SWITCHLOCK AND PADLOCK
K4859 WHIWITHOUT SWITCHLOCK
K4858SWITCHLOCK FOR FAN ISOLATOR
K2000PADLOCK
1
10
10
10
MOUNTING BOXESFLUSH: 861 ZICSURFACE: K2140 WHI
Must not be installed in abathroom or shower room.Designed for wiring onto lighting circuits DIMENSIONS: 86 x 86mmFIXING CENTRES: 60.3mm
BS.4573: 1970
K700 WHISHAVER SOCKET OUTLET 200-250 VOLTS.50/60HzFUSED.Incorporates a self-resetting overload device, limitingcurrent to 20VA.
10
MOUNTING BOXESFLUSH: 878 ZICSURFACE: K2172 WHIThis design incorporates a doublewound isolating transformer rated20VA at 230 or 115 volts it meetsBS EN 61558 making it safe for usein bathrooms. Insertion of a shaverplug automatically switches on byenergising the primary side of theisolating transformer – removalautomatically switches off. Thetransformer is protected againstoverload by an automatic solidstate overload device withautomatic resetting.DIMENSIONS: 146 x 86mmFIXING CENTRES: 120.6mm.
BS EN 61558-2-5: 1998
K701 WHISHAVER SUPPLY UNIT DUAL VOLTAGE.115/230V OUTPUT(220/240V 50/60Hz INPUT)
K706 WHISHAVER SUPPLY UNIT DUAL VOLTAGE.115/230V OUTPUT(120/130V 50/60Hz INPUT)(NON UK)
1
1
16 AMP125/250VUNIVERSALFLUSH
MOUNTING BOXES
FLUSH: 861 ZIC
SURFACE: K2140 WHI
The universal socket does notincorporate an earth contact.Therefore, appliances needing earthconnection (class 1 equipment)must NOT be used with this socket.The socket is intended for use withBS, USA and CEE standard plugs.
DIMENSIONS: 86 x 86mmFIXING CENTRES: 60.3mmBS.5733: 1995
K4155 WHI1 GANGSHUTTERED(NON UK)
10
K4155 WHI K4150 WHI
K4152 WHI
K700 WHI
K701 WHI
K706 WHI
K4857 WHI
K4859 WHI
K4858
24
wiring devices | white www.mkelectric.co.uk
Logic Plus
Features andBenefits
ConnectionUnits
SWITCHEDFLUSH
UNSWITCHEDFLUSH
MOUNTING BOXES
K1030, K1040, K1060 and K1070FLUSH: 866 ZICSURFACE: K2031 WHI
330 and 370FLUSH: 866 ZICSURFACE: K2140 WHI
All units are fitted with a 13 ampfuse-link to BS.1362. See page 187for spare fuse-links.
The fuse carrier can be locked inthe open position by removing thefuse and using K2000 fuse carrierpadlock
Base entry frontplates are 12.5mm deep
K330 WHIDP WITH FLEX OUTLET IN BASE AND THICK FRONTPLATE
K370 WHIDP WITH NEON, FLEX OUTLET IN BASE AND THICK FRONTPLATE
K370 D1 WHIDP WITH NEON, FLEX OUTLET IN BASE, THICK FRONTPLATE AND RED ROCKER
K1030 WHIDP WITH FRONT FLEX OUTLET
10
10
10
10
K1030 and K1070 front flex outletproducts cannot be mounteddirectly onto MI Cable Box K2131.A mounting frame K2134 will haveto be used between the productand the box.
Base entry frontplates are 12.5mm deep
DIMENSIONS:86 x 86mm
FIXING CENTRES:60.3mm
BS.1363 Pt.4: 1995
K1040 WHIDP
K1040 KO WHIDP WITH TAMPERPROOF SCREW
K1060 WHIDP WITH NEON
K1060 D1 WHIDP WITH NEON AND RED ROCKER
K1070 WHIDP WITH FRONT FLEX OUTLET AND NEON
K1070 D1 WHI DP WITH FRONT FLEX OUTLET,NEON AND RED ROCKER
K2000FUSE CARRIER PADLOCK
10
10
10
10
10
10
10
MOUNTING BOXES
FLUSH: 866 ZIC (35mm)
SURFACE: K2140 WHI All units are fitted with a 13 ampfuse-link to BS.1362. See page 187for spare fuse-links. Base entry frontplates are 12.5mm deepThe fuse carrier can be locked inthe open position by removing thefuse and using K2000 fuse carrierpadlockDIMENSIONS: 86 x 86mmFIXING CENTRES: 60.3mmBS.1363 Pt.4: 1995
K337 WHIWITH FLEX OUTLET IN BASE AND THICK FRONTPLATE
K337 KO WHIWITH FLEX OUTLET IN BASE, THICK FRONTPLATE AND TAMPERPROOF SCREW FOR FUSE CARRIER
K377 WHIWITH FLEX OUTLET IN BASE, NEON ANDTHICK FRONTPLATE
10
10
10
K337 WHI
K337KOWHIK370 WHI
K330 WHI
K1060 WHI
K1040 WHI
K1060 D1 WHI
K1030 WHI K1070 WHI K1070 D1 WHI
K377 WHI
A screwless cord gripautomatically clampsand securely holds thecable in connectionunits with base andfront flex outlets
Switched units aredouble pole withneutral pole contacts‘making’ before and‘breaking’ after livecontacts. Rockers withbuilt-in indicators areavailable
When servicing orrepairing appliances,fuse carriers remainattached to thefrontplate whenopened and can bepadlocked for safety
An optionaltamperproof screw on fuse carriers isparticularly useful for appliances in public areas
In-line terminals, backed out captiveterminal screws andclear marking makewiring up easy
K370 D1 WHI
25
technical hotline +44 (0)1268 563720 white | wiring devices
Logic Plus
Dual Switch
20 AMP FLUSH
DP Switches
20 AMP FLUSH
32 AMP FLUSH
45 AMP
MOULDED
FLUSH
45 AMP
METAL
FOR CONTROLLING DUALIMMERSION HEATERS
MOUNTING BOXESFLUSH: 866 ZICSURFACE: K2140 WHI
Only mounting boxes with an earthterminal should be used.These products are marked ‘on’ and‘off’ against the one-way DP switchand ‘sink’ and ‘bath’ against thetwo-way SP switch.DIMENSIONS: 86 x 86mmFIXING CENTRES: 60.3mmBS EN 60669-1: 2000
K5208 WHI
K5207 WHIWITH NEON
10
10
MOUNTING BOXES
FLUSH: 866 ZIC
SURFACE:K2140 WHIK2031 WHI (for extra wiring space)
Base entry frontplates are 12.5mm deep.
All switches are complete withearth terminals.
Not recommended for switchinglarge banks of PCs
DIMENSIONS:86 x 86mm
FIXING CENTRES: 60.3mm
BS EN 60669-1: 2000
K5403 WHIWITH FLEX OUTLET IN BASE
K5423 WHIWITH FLEX OUTLET IN BASE AND NEON
K5423 WH WHIWITH FLEX OUTLET IN BASE,NEON AND MARKED ‘WATER HEATER’.
K5423 D1 WHIWITH FLEX OUTLET IN BASE, NEON AND RED ROCKER
10
10
10
10
MOUNTING BOXES
FLUSH:866 ZIC (6mm2 conductors)877 ZIC (10mm2 conductors)
SURFACE:K2140 WHI (6mm2 conductors)K2031 WHI (10mm2 conductors)
Supplied with 8 self-adhesiveplastic identification labels markedhob, fan, oven, water heater,shower, air conditioner, cooker andwashing machine.
Not recommended for switchinglarge banks of PCs
DIMENSIONS: 86 x 86mm
FIXING CENTRES: 60.3mm
BS EN 60669-1: 2000
K5105 WHIWITH NEON
1
MOUNTING BOXES
FLUSH:886 ZIC (6mm2 conductors)878 ZIC (10mm2 conductors)
SURFACE:K2172 WHI
K5205 WHI and K5215 WHISupplied with 8 self-adhesiveplastic identification labels markedhob, fan, oven, water heater,shower, air conditioner, cooker andwashing machine.
Not recommended for switchinglarge banks of PCs
DIMENSIONS: 86 x 146mm
FIXING CENTRES:120.6mm
BS EN 60669-1: 2000
K5205 WHI
K5215 WHIWITH NEON
K5215 CK WHIWITH NEON AND MARKED ‘COOKER’
K5215 SH WHIWITH NEON AND MARKED ‘SHOWER’
1
1
1
1
K5230Supplied with mounting box. Earthterminal fitted on base of box.Not recommended for switchinglarge banks of PCsDIMENSIONS: 150 x 89 x 50mmKNOCKOUTS: 8 x 20mmTERMINAL CAPACITY:16mm2 conductorsBS EN 60669-1: 2000
K5012Not supplied with mounting box.FLUSH: 5120 ALMSupplied with earth terminals Not recommended for switchinglarge banks of PCsDIMENSIONS: 178 x 165mmBS EN 60669-1: 2000
K5230 WHIWITH NEONSURFACE MOUNTED
K5012 WHIWITH NEONFLUSH MOUNTED
1
1
K5423 WHI
K5105 WHI
K5205 WHI
K5215CKWHI
K5423D1WHI
K5423WHWHI
K5403 WHI
K5012 WHI
K5230 WHI
K5208 WHI
K5207 WHI
26
wiring devices | white www.mkelectric.co.uk
Logic Plus
CookerConnectionUnit
FLUSH
CookerControls
45 AMP
MOULDED
FLUSH
45 AMP
MOULDED
SURFACE
45 AMP
METAL
FLUSH
45 AMP
METAL
SURFACE
MOUNTING BOX
FLUSH: 877 ZIC
Supplied complete with terminalblock, each terminal of which willaccommodate up to two 10mm2conductors.
Moulded cover plate, cable clamp included.
DIMENSIONS:86 x 86mm
FIXING CENTRES:60.3mm
BS.5733: 1995
K5045 WHI 10
MOUNTING BOXES
FLUSH: 886 ZIC: (Up to 6mm2 conductor)878 ZIC: (Up to 10mm2 conductor)
Rotary operated shutter.DIMENSIONS:86 x 146mm
FIXING CENTRES: 120.6mm
BS.4177: 1992
K5060 WHI45 AMP DP MAIN SWITCH AND 13 AMP SWITCHSOCKET OUTLET
K5061 WHI45 AMP DP MAIN SWITCH AND 13 AMP SWITCHSOCKET OUTLETWITH NEONS
1
1
Supplied complete with mountingbox and cable restraint.
Fitted with earth terminals.
Rotary operated shutter.DIMENSIONS:86 x 146 x 60mm
BS.4177: 1992
K5040 WHI45 AMP DP MAIN SWITCH AND 13 AMP SWITCHSOCKET OUTLET
K5041 WHI45 AMPDP MAIN SWITCH AND 13 AMP SWITCHSOCKET OUTLET WITH NEONS
1
1
MOUNTING BOX
FLUSH: 5120 ALM
Fitted with earth terminals.
Rotary operated shutter.DIMENSIONS:178 x 165mm
BS.4177: 1992
K5011 WHI45 AMP DP MAIN SWITCHAND 13 AMP SWITCHSOCKET OUTLETWITH NEONS
1
Supplied complete with mountingbox.
Fitted with earth terminals.
Rotary operated shutter.DIMENSIONS:156 x 144 x 67mm
KNOCKOUTS:5 x 25mm. Two in each of top and bottom,one in back.
BS.4177: 1992
K5001 WHI45 AMP DP MAIN SWITCH AND 13 AMP SWITCHSOCKET OUTLET WITH NEONS
1
K5011 WHI K5001 WHI
K5045 WHI
K5061 WHI
K5040 WHI
K5041 WHI
K5060 WHI
27
technical hotline +44 (0)1268 563720 white | wiring devices
Logic Plus
Plateswitches
10 AMP
FLUSH
MOUNTING BOXES
FLUSH:1, 2 & 3 GANG: 3995 ZIC4 & 6 GANG: 862 ZIC
SURFACE: 1, 2 & 3 GANG: K2160 WHI4 & 6 GANG: K2161 WHI
These switches do not have to bederated when used with fluorescentor inductive loads.
K4871, K4872, K4873, K4874, K4879These switches can be wired aseither one-way or two-way.
K4870 WHIK4870 GRA1 GANG SP ONE-WAY
K4871 WHIK4871 GRA1 GANG SP TWO-WAY
K4872 WHIK4872 GRA2 GANG SP TWO-WAY
K4875 WHI1 GANG INTERMEDIATE
10
10
10
10
10
10
10
DIMENSIONS:1, 2 & 3 gang: 86 x 86mm4 & 6 gang: 86 x 146mm
FIXING CENTRES:1, 2 & 3 gang: 60.3mm4 & 6 gang: 120.6mm
BS EN 60669-1: 2000
20 AMP VERSIONS K4870, K4873, K4874, K4875,K4871 & K4872 are all availableas 20 amp SP versions. Use suffixD2 WHI when ordering.
K4867is 20amp DP 1 way version of K4871.
K4868is 20amp DP 1 way version of K4872.
K4876 WHI1 GANG DP ONE-WAY
K4873 WHI3 GANG SP TWO-WAY
K4874 WHI4 GANG SP TWO-WAY
K4879 WHI6 GANG SP TWO-WAY
5
5
10
10
MOUNTING BOXES
FLUSH:3995 ZIC
SURFACE:K2160 WHI
DIMENSIONS:86 x 86mm
FIXING CENTRES:60.3mm
BS EN 60669-1: 2000
K4878B WHI1 GANG SP TWO WAYPUSH SWITCH WITH BELL SYMBOLPUSH TO MAKE OR BREAK
K4878P WHI1 GANG SPTWO WAY PUSH SWITCH MARKED ‘PRESS’PUSH TO MAKE OR BREAK
10
10
K4871 WHI
K4872 GRA
K4875 WHI
K4876 WHI
K4873 WHI
K4874 WHI
K4878B WHI
K4878P WHI
K4879 WHI
K4870 GRA
Neon locator on a plateswitch
The Logic Plus finish is also available in the Grid Plus modular system. See pages 163-169
NEON
LOCATOR
Neon Plateswitch Locator is for usewith any 1, 2 and 3 gang LogicPlus plateswitches.
Used for location of switches indark situations.
FIXING CENTRES:60.3mm
BS.5733: 1979
K3041NEON PLATESWITCHLOCATOR 200-250V. 50Hz.
5
K3041
28
wiring devices | white www.mkelectric.co.uk
Logic Plus
Plateswitches
WITH WIDE ROCKERS
10 AMP
FLUSH
ArchitraveSwitches
10 AMP
FLUSH
IntelligentDimmer Switches230V a.c. 50HzTUNGSTEN FILAMENTAND LOW VOLTAGEHALOGEN LIGHTINGFLUSH
MOUNTING BOXESFLUSH: 3995 ZICSURFACE:K2160 WHIK2140 WHI (for extra wiring space)These switches do not have to bederated when used with fluorescentor inductive loads.DIMENSIONS: 86 x 86mmFIXING CENTRES: 60.3mmBS EN 60669-1: 200020 AMP DP VERSIONS K4787 is 20 amp DP 1 wayversion of K4781.K4788 is 20 amp DP 1 wayversion of K4782. BS. 3676: 1989
MOUNTING BOXESFLUSH:1 GANG: 3921 ZIC2 GANG: 3922 ZICSURFACE:1 GANG: K2151 WHI2 GANG: K2152 WHIThese switches do not have to bederated when used with fluorescent orinductive loads.K4841, K4842 These switches can bewired as either one-way or two-way.DIMENSIONS:1 gang: 86 x 32mm;2 gang: 146 x 32mmFIXING CENTRES:1 gang: 60.3mm; 2 gang: 120.6mmBS EN 60669-1: 2000
K4841 WHI1 GANG SPTWO-WAY
K4842 WHI2 GANG SPTWO-WAY
K4848B WHI1 GANG SP PUSH SWITCH WITH BELL SYMBOLPUSH TO MAKE OR BREAK
K4848P WHI1 GANG SP PUSH SWITCH MARKED ‘PRESS’PUSH TO MAKE OR BREAK
5
5
5
5
MOUNTING BOXESWITH/WITHOUT PATTRESS (Pattress is supplied with K1501, K1521)K1522FLUSH: 861 ZIC/866 ZICSURFACE: K2140 WHIK1501, K1521 FLUSH: with pattress: 16mm deep min 3995 ZICwithout pattress: 25mm deep min 861 ZICSURFACE: K2160 WHI/K2140 WHIDimmers comply with BS EN 55015 (CISPR15) for RFI suppression. Micro controller based circuitry to provideelectronic soft-start and overload protection.Suitable for use with good quality electronicor wire wound transformers. Can also beused with good quality mains voltagehalogen lamps incorporating GU10 bases.Please check with lamp manufacturer todetermine suitability.DIMENSIONS: 86 x 86mmFIXING CENTRES: 60.3mmConforms to BS EN 60669-2-1,BS EN 55015
K1501 WHI LV1 GANG SINGLETWO WAY 60W/VA-500W/400 VA
K1521 WHI LV1 GANG SINGLETWO WAY 40W/VA-300W/240 VA
K1522 WHI LV1 GANG DOUBLETWO WAY 2 x 40W/VA-300W/240 VA
1
1
1
K4781 GRA
K4782 GRA
K4783 WHI
K4848B WHI
K4785 WHI
Wide rocker plateswitches are not only a stylish
alternative to standard plateswitches, but with the
fixing screws hidden, the rocker cap acts as an
additional barrier to prevent unwanted tampering in
public areas. They are also very practical and easy to
use for the young and elderly alike.
K4848P WHI
K1501 WHI LV
K1521 WHI LV
K1522 WHI LV
Micro controller based circuitry toprovide electronic soft-start andoverload protection. Suitable for usewith good quality electronic or wirewound transformers. Can also beused with good quality mains voltagehalogen lamps incorporating GU10bases. Please check with lampmanufacturer to determine suitability.
K4842 WHI
K4841 WHI
K4781 WHIK4781 GRA1 GANG SP TWO-WAY WITH WIDE ROCKER
K4782 WHIK4782 GRA2 GANG SP TWO-WAY WITH WIDE ROCKERS
K4783 WHI3 GANG SP TWO-WAY WITH WIDE ROCKERS
K4785 WHIK4785 GRA1 GANG SP INTERMEDIATE WITH WIDE ROCKER
1010
10
1010
1010
29
technical hotline +44 (0)1268 563720 white | wiring devices
Logic Plus
StandardDimmer Switches
230V a.c. 50Hz
TUNGSTEN FILAMENT
FLUSH
DimmerSwitches(Non UK)
120-134V 60Hz
FLUSH
200-250V a.c.
50 or 60Hz
FLUSH
Blank Plates
FLUSH
Flex OutletFrontplate
FLUSH
MOUNTING BOXESFLUSH: 861 ZIC-25mm deep. Withpattress: 3995 ZIC-16mm deep minSURFACE: K2140 WHI-30mm deep.With pattress: K2160 WHI-16mm deepminOnly suitable for tungsten filamentlamps.NOT suitable for fluorescentlamps or low voltage lighting.DIMENSIONS: 86 x 86mmFIXING CENTRES: 60.3mmConforms to BS EN 60669-2-1 and BS EN 55015
K1511 WHI1 GANG SINGLEONE WAY 65-450W
K1531 WHI1 GANG SINGLEONE WAY 40-250W
K1532 WHI1 GANG DOUBLEONE WAY 2 x 40-250W
K1533 WHI1 GANG DOUBLETWO WAY 2 x 40-250W
K1534 WHI1 GANG SINGLETWO WAY 40-250W
K1535 WHI1 GANG SINGLETWO WAY 65-450W
1
1
1
1
1
1
MOUNTING BOXESFLUSH: 1 GANG: 861 ZIC-25mm deep min2 GANG: 886 ZIC-35mm deep minSURFACE: 1 GANG: K2140 WHI-30mm deep2 GANG: K2142 WHI-30mm deepDIMENSIONS:K1731, K174186 x 86mmK1761146 x 86mm
FIXING CENTRES: K1731, K174160.3mmK1761120.6mm
K1731 WHI1 GANG SINGLEONE WAY40-250W
K1741 WHI1 GANG SINGLETWO WAY60-450W
K1761 WHI2 GANG SINGLE DIMMERTWO WAY90-650W
1
1
1
MOUNTING BOXESFLUSH: 861 ZIC-25mm deep minSURFACE: K2140 WHI-30mm deep
DIMENSIONS: 86 x 86mmFIXING CENTRES:60.3mm
K1541 WHI1 GANG SINGLEONE WAY75-500W 50Hz
K1561 WHI1 GANG SINGLETWO WAY100-1000W 50Hz
K1631 WHI1 GANG SINGLEONE WAY40-250W 60Hz
K1641 WHI1 GANG SINGLEONE WAY75-500W 60Hz
K1661 WHI1 GANG SINGLETWO WAY100-1000W 60Hz
K1539 WHIFAN CONTROLLER1 GANG SINGLE ONE WAY300 VA 50Hz
1
1
1
1
1
1
K3825 WHI For use with 3921 ZIC and K2151WHI mounting boxes.
K5033 WHIFor use with 5120 ALM deep metalbox.
DIMENSIONS:3825 WHI: 86 x 31mm3827 WHI: 86 x 86mm3828 WHI: 86 x 146mm5033 WHI: 178 x 165mm
FIXING CENTRES:3825 WHI: 60.3mm3827 WHI: 60.3mm3828 WHI: 120.6mm5033 WHI: 133mm
BS.5733: 1995
K3825 WHI1 GANG MOULDED ARCHITRAVE
K3827 WHI1 GANG MOULDED
K3828 WHI2 GANG MOULDED
K5033 WHIMETAL
1
10
10
10
Complete with three pairs ofterminals, each suitable for 2 x 2.5mm2 conductors and a1.5mm2 flexible cord. A cord-grip is also fitted.
Frontplate thickness is 12.5mm.Hole diameter is 11mm.
DIMENSIONS:86 x 86mm
FIXING CENTRES: 60.3mm
BS.5733: 1995
K1090 WHIFLEX OUTLET FRONTPLATE.UNFUSED20 AMP RATING
10
K1511 WHI
K1531 WHI
K1532 WHI
K1533 WHI
K1731 WHI
K1741 WHI
K1761 WHI
K1541 WHI
K1561 WHI
K1631 WHI
K1661 WHI
K1090 WHIK3827 WHIK3825 WHI
K3828 WHI
K5033 WHI
30
wiring devices | white www.mkelectric.co.uk
Logic Plus
MODULAR DATACOMS
Euro DatacomFrontplates
FRONTPLATES
Euro DatacomModules
RJ11/12 RJ45 CAT 6
MOUNTING BOXES
Suitable for flush boxes to BS.4662: 1970 and surface boxesto BS.5733: 1995
Refer to appropriate module forminimum box depth.
FIXING CENTRES1 gang: 60.3mm2 gang: 120.6mm
BS.5733;1995 where applicable
Note: No grid required, modulesjust clip into place
K181 WHI1 GANG EURO FRONTPLATEONE MODULEAPERTURE SIZE 25 X 50MM
K182 WHI1 GANG EURO FRONTPLATETWO MODULEAPERTURE SIZE 50 X 50MM
K184 WHI2 GANG EURO FRONTPLATEFOUR MODULEAPERTURE SIZE 100 X 50MM
10
10
10
Suitable for both RJ11 and RJ12jacksRJ11; 4 wireRJ12; 6 wire
MOUNTING BOXESMinimum box depth 25mm
FCC68
K5887 WHIK5887 BLKRJ11/12ONE MODULE 25 X 50MM
55
Enhanced Cat 6 performance.
Suitable for both 568A and 568Bwiring schemes.
MOUNTING BOXESMinimum Box Depth32mm screened
TIA/EIA TSB40A: Cat 6TIA/EIA 568-A: Cat 6ISO/IEC11801: Cat 6
K5846 WHIK5846 BLKRJ45 CAT 6ONE MODULE 25 X 50MM
K5846s WHIK5846s BLKRJ45 CAT 6 SCREENEDONE MODULE 25 X 50MM
K5864 WHIRJ45 CAT 6 ANGLEDONE MODULE 25 X 50MM
5
55
55
K184 WHI
K181 WHIK5887 WHI K5887 BLK
K5846s WHI
K5864 WHI
K5830MOUNTING BOX: 35mm minimum46mm (for extra wiring space)DIMENSIONS: 50 x 50mmBS. 1363: Part 2: 1995K5831MOUNTING BOX: 46mmDIMENSIONS: 50 x 50mmIEC 60884-1: 2002K5832MOUNTING BOX: 35mm46mm (for extra wiring space)DIMENSIONS: 50 x 50mmSSA.444: 1985
K5830 WHI
K5830 BLKUK 1 GANG EURO 2 MODULE 13 AMP 250V SHUTTERED
K5831 WHI
K5831 BLKGERMAN 2P+E16 AMP 250V SHUTTEREDEURO 2 MODULE (NON UK)
K5832 WHI
K5832 BLKAMERICAN15 AMP 127V SHUTTEREDEURO 2 MODULE (NON UK)
10
10
10
10
10
10
K5833MOUNTING BOX: 35mm minimum46mm (for extra wiring space)DIMENSIONS: 50 x 50mmBS 546: 1950K5834MOUNTING BOX: 46mmDIMENSIONS: 50 x 50mmNF C61-341
K5833 WHI
K5833 BLKUK 1 GANG EURO 2 MODULE 5 AMP 250V SHUTTERED
K5834 WHI
K5834 BLKFRENCH/BELGIAN 2P+E16 AMP 250V SHUTTEREDEURO 2 MODULE (NON UK)
10
10
10
10
PowerModules
K182 WHI
K5830 WHI
K5831 WHI
K5832 WHI
K5833 WHI
K5834 WHI
Mains operated products and extra low voltage modules must notbe installed within the same frontplate. Refer to BS. 7671 IEEWiring Regulations for details.
K5846 WHI
31
technical hotline +44 (0)1268 563720 white | wiring devices
Logic Plus
BNC
50 Ohm crimp connector suitablefor use with RG58, URM43,URM76 and Beldon 9907 type co-axial cables.
MOUNTING BOXESMinimum box depth 25mm
K5801 WHIK5801 BLKBNC 50ONE MODULE 25 X 50MM
55
ISDN BT TELEPHONE
K5840 WHIK5840 BLKISDNONE MODULE 25 X 50MM
55 K5820 WHI
K5820 BLKBT MASTER ONE MODULE 25 X 50MM
K5821 WHIK5821 BLKBT SECONDARY ONE MODULE 25 X 50MM
55
55
Incorporates line terminatingresistor.
MOUNTING BOXESMinimum depth 25mm
TIA/EIA TSB40ATIA/EIA 568-AISO/IEC11801
MOUNTING BOXESMinimum depth 16mm
BS.6312 part 2
K5820 WHI K5820 BLK K5801 WHI K5801 BLK
K5821 WHI K5821 BLK
K5840 WHI K5840 BLK
RJ45 CAT 5E
Enhanced Cat 5 performance.Suitable for both 568A and 568Bwiring schemes.Supplied with cable tie and cableanchors to secure wires in theconnectors.
MOUNTING BOXESMinimum box depth25mm standard32mm screened
TIA/EIA TSB40A: Cat 5eTIA/EIA 568-A: Cat 5eISO/IEC11801: Cat 5e
K5844 WHIRJ45 CAT 5E ANGLEDONE MODULE 25 X 50MM
K5845 WHIK5845 BLKRJ45 CAT 5EONE MODULE 25 X 50MM
K5845s WHIK5845s BLKRJ45 CAT 5E SCREENEDONE MODULE 25 X 50MM
55
55
5
K5845 WHI
K5845s WHI
K5844 WHI
Mains operated products and extra low voltage modules must not be installed within the same frontplate. Refer to BS. 7671 IEE WiringRegulations for details.
32
wiring devices | white www.mkelectric.co.uk
Logic Plus
LJU6C DatacomFrontplates
FRONTPLATES
K172 WHI1 GANG TWINLJU6C FRONTPLATETWO MODULEAPERTURE SIZE 22 X 37MM
10
MOUNTING BOXESsuitable for flush boxes toBS.4662:1970 and surface boxes toBS.5733:1995 Refer to appropriate module forminimum box depth.FIXING CENTRES1 gang: 60.3mm2 gang: 120.6mmBS.5733:1995 where appropriateNote: No grid required, modulesjust clip into place
K172 WHI
TV CO-AXIAL OUTLETSFOR DIGITAL TVSCREENEDNON ISOLATED
Fully screened non isolated TVoutlets containing a combination ofsingle, TV/FM Diplexer andTV/FM/SAT Triplexer for use withindigital TV systems and interactiveTV services. Single outlets forconnection to a single TV, FM orSatellite co-axial aerial lead.
MOUNTING BOXESMin box depth 32mmDIMENSIONS1 Module 25 x 50mm2 Module 50 x 50mm
BS.3041:1997IEC 169-2:1965BSEN 50083 & BS.5733:1995 where applicable
K5850 WHIK5850 BLKSINGLE OUTLET (IEC MALE)ONE MODULE 25 X 50MM
K5851 WHIK5851 BLKSINGLE OUTLET (IEC FEMALE)ONE MODULE 25 X 50MM
K5855 WHIK5855 BLKSINGLE F-TYPE SATELLITE SOCKETONE MODULE 25 X 50MM
55
55
55
TV/FM diplexer units for connection to a single co-axial aerial lead withcombined TV and FM signals.TV/FM/SAT triplexer units for connection to a single co-axial aerial lead withcombined TV,FM and Satellite signals
K5852 WHIK5852 BLKTWIN OUTLET TV/FM DIPLEXERTWO MODULE 50 X 50MM
K5852 DAB WHIK5852 DAB BLKTWIN OUTLET TV-FM/DAB DIPLEXERTWO MODULE 50 X 50MM
K5853 WHIK5853 BLKTRIPLE OUTLETTV/FM/SATELLITE TRIPLEXERTWO MODULE 50 X 50MM
55
55
55 K5853 DAB WHI
K5853 DAB BLKTRIPLE OUTLET TV-FM/DAB-SATTRIPLEXER TWO MODULE 50 X 50MM
K5854 DAB WHIK5854 DAB BLKQUAD OUTLET TV-FM/DAB-2XSATTWO MODULE 50 X 50MM
55
55
K5850 WHI K5850 BLK
K5851 WHI K5851 BLK
K5855 WHI K5855 BLK
K5852 WHI
K5853 WHI
These products are fully compatible with Labgear TV distribution systems andare approved for use in “Sky Homes” and “Homes On” specifications
K5852 DAB WHI
BLANKS
K180 WHITWO MODULEBLANK 50 X 50MM
K188 WHIK188 BLKONE MODULEBLANK 25 X 50MM
K186 WHIK186 BLKHALF MODULEBLANK 12.5 X 50MM
1010
1010
10
MOUNTING BOXESMinimum depth 16mm
BS.5733:1995 where applicable
K188 BLK
K186 WHI
K180 WHI
K186 BLK
K188 WHI
PERFORMANCE
SINGLE OUTLETS
TV/FM IEC MALE OR FEMALEDC-950MHz
SAT F-TYPEDC-1.75GHz
DIPLEXER AND TRIPLEXER PRODUCTS
TV/FM/SAT PRODUCTSOUTLET DIPLEXER TRIPLEXERTV DC-68.5MHz, 174-862MHz DC-68.5MHz, 174-862MHzFM 87.5-108MHz 87.5-108MHzSAT N/A DC-200kHz, 950-2400MHz
TV/FM/DAB/SAT PRODUCTS FOR DIGITAL RADIOOUTLET DIPLEXER TRIPLEXER / QUAD OUTLETTV 470-862MHz 470-862MHzFM/DAB 87.5-230MHz 87.5-230MHzSAT OR SAT1 N/A 950-2400MHzSAT2 DC-2300MHz
K5853 DAB WHI
K5854 DAB WHI
Euro DatacomModules
33
technical hotline +44 (0)1268 563720 white | wiring devices
Logic Plus
K5740 WHIK5740 BLKISDNONE MODULE
55K5787 WHI
K5787 BLKRJ11/12ONE MODULE
55
RJ11/12/ RJ45 CAT 5ERJ45 CAT 6 ISDN BLANKS
K5745 WHI K170 WHI
K170 BLK
Suitable for both RJ11 and RJ12jacks.RJ11: 4 wireRJ12: 6 wireMOUNTING BOXESMinimum box depth 25mmFCC68
Enhanced Cat 5 performance.Suitable for both 568A and 568Bwiring schemes.Supplied with cable tie and cableanchors to secure wires in theconnectorsMOUNTING BOXESMinimum box depth 25mm (unscreened)32mm (screened)TIA/EIA TSB40A: Cat5eTIA/EIA 568-A: Cat5eISO/IEC11801: Cat5e
Incorporates line terminatingresistorMOUNTING BOXESMinimum box depth 25mmTIA/EIA TSB40ATIA/EIA 568-AISO/IEC11801
MOUNTING BOXESMinimum box depth 16mmBS.5733:1995 where appropriate
LJU6C DatacomModules
K5745 WHIK5745 BLKRJ45 CAT 5EONE MODULE
K5745s WHIK5745s BLKRJ45 CAT 5ESCREENEDONE MODULE
55
55
Enhanced Cat 6 performance.
Suitable for both 568A and 568Bwiring schemes.
MOUNTING BOXESMinimum Box Depth32mm screened
TIA/EIA TSB40A: Cat 6TIA/EIA 568-A: Cat 6ISO/IEC11801: Cat 6
K5746 WHIK5746 BLKRJ45 CAT 6ONE MODULE
K5746s WHIK5746s BLKRJ45 CAT 6SCREENEDONE MODULE
55
55 K170 WHI
K170 BLKONE MODULE BLANK
1010
K5740 WHI
K5740 BLKK5787 BLK K5745s WHI
K5787 WHI
K5746s WHI
K5746 WHI
34
wiring devices | white www.mkelectric.co.uk
Logic Plus
Telephone SocketOutlets
FLUSH
K422 and K427 Are approved under OFTEL approvalNo.NS/G/23/L/100005 for directand indirect connections between atermination point of a publictelecommunications system and anypiece of approvedtelecommunications apparatus.
BS.6312 Pt.2
K4817FCC 68
K3540Accepts standard BS 546 2 amp 2 pin and earth plug where2 pins are used for telephonecircuits and the earth pin is used toensure correct polarity
K422 WHI1 GANG BT TELEPHONE MASTER
K427 WHI1 GANG BT TELEPHONE SECONDARY
K4817 WHI1 GANGRJ11 TELEPHONE SOCKET
K3540 WHI3 PIN WITHTELEPHONE SYMBOL (NON UK)
400 NATIDC INSERTION TOOL
10
10
10
10
10
K422 WHI
K427 WHI
K4817 WHI
K3540 WHI
MK ModularDatacomModules
MOUNTING BOXESK420 and K421are approved under OFTELapproval No.NS/G/23/L/100005 fordirect and indirect connectionsbetween a termination point of apublic telecommunications systemand any piece of approvedtelecommunications apparatus.BS.6312 Pt 2K487 FCC 68K520 Minimum depth 40mmwhen fitted with a data connector.The data connector is not provided.K190 Minimum depth 16mmBS.5733: 1995 where applicable
K420 WHITELEPHONE OUTLET BT MASTER ONE MODULE
K421 WHITELEPHONE OUTLET BT SECONDARY ONE MODULE
K487 WHIRJ11TELEPHONE/DATA SOCKET ONE MODULE
K190 WHIBLANK ONE MODULE
5
5
10
10
K420 WHI K421 WHI
K487 WHI K190 WHIK545 WHI
K501 WHI
K501 WHIBNCDATA SOCKET 50ONE MODULE
K545 WHIRJ45 CATEGORY 5eDATA SOCKETONE MODULE
5
5
MOUNTING BOXESMinimum box depth 25mm K545 is Cat5e IEC 11801BS EN 50173TIA/EIA 568ABS.5733: 1995 where applicable
MK ModularFrontplates
K191 WHI1 GANGONE MODULE
K192 WHI1 GANG TWO MODULE
K193 WHI2 GANG THREE MODULE
K194 WHI2 GANGFOUR MODULE
5
5
5
5
MOUNTING BOXES
Suitable for flush boxes to BS. 4662: 1970 and surface boxesto BS. 5733: 1995
See Modules for correct box depth.
BS. 5733: 1995 where applicable
K194 WHI
K193 WHI
K192 WHI
K191 WHI
35
technical hotline +44 (0)1268 563720 white | wiring devices
Logic Plus
TV/FM and SatelliteCo-Axial Socket Outletswith BT Outlet
K3550 WHISINGLE OUTLET(IEC MALE)
K3551 WHISINGLE OUTLET(IEC FEMALE)
K3555 WHISINGLE OUTLETF-TYPE SATELLITE SOCKET
K3552 WHITWIN TV/FM DIPLEXER
10
10
10
10 K3552 DAB WHITWIN TV/FM DAB DIPLEXER
K3553 WHITRIPLE TV/FM/SATTRIPLEXER
K3553 DAB WHITRIPLE TV/FM DAB/SAT TRIPLEXER
K3554 DAB WHIQUAD TV/FM DAB/SATX2QUADPLEXER
10
10
10
10 K3557 WHISINGLE OUTLET (IEC MALE)WITH BT SECONDARY
K3560 WHITWIN TV/FM DIPLEXERWITH BT SECONDARY
K3560 DAB WHITWIN TV/FM DAB DIPLEXERWITH BT SECONDARY
K3561 WHITRIPLE TV/FM/SAT TRIPLEXERWITH BT SECONDARY
5
5
5
10
TV/FM and SatelliteCo-Axial Socket Outlets
FOR DIGITAL AND INTERACTIVE SERVICES
SCREENED, NON ISOLATED
FLUSHFOR DIGITAL AND INTERACTIVE TV SERVICES
FLUSH
MOUNTING BOXESMinimum box depth 32mm1 gang: Flush: 866 ZIC
Surface: K2181 WHI2 gang: Flush: 886 ZIC
Surface: K2183 WHI
DIMENSIONS:1 gang: 86 x 86mm2 gang: 86 X 146mm
FIXING CENTRES: 1 gang: 60.3mm2 gang: 120.6mm.
PERFORMANCE
SINGLE OUTLETS
TV/FM IEC MALE OR FEMALEDC-950MHz
SAT F-TYPEDC-950MHz
DIPLEXER AND TRIPLEXER PRODUCTS
TV/FM/SAT PRODUCTSOUTLET DIPLEXER TRIPLEXERTV DC-68.5MHz, 174-862MHz DC-68.5MHz, 174-862MHzFM 87.5-108MHz 87.5-108MHzSAT N/A DC-200kHz, 950-2400MHz
TV/FM/DAB/SAT PRODUCTS FOR DIGITAL RADIOOUTLET DIPLEXER TRIPLEXERTV 470-862MHz 470-862MHzFM/DAB 87.5-230MHz 87.5-230MHzSAT OR SAT1 N/A 950-2400MHzSAT2 DC-2300MHz
BS:3041:1997IEC169-2:1965BSEN50083 where applicableBS.5733:1995 where applicableBS.6312 Part 2
TV/FM/SAT triplexer units forconnection to a single co-axialaerial lead with combined TV, FMand Satellite signals
BT Telephone Secondary outlet foruse with interactive TV digitalservices.
K3562 and K3563 outlets withadditional single TV (male) outletfor secondary distribution of TVsignal
K3550 WHI
K3551 WHI
K3555 WHI
K3552 DAB WHI
K3553 WHI
K3557 WHI
K3560 WHI
K3561 WHI
K3562 WHI
K3563 WHI
Fully screened non isolated TVoutlets containing a combination ofsingle,TV/FM Diplexer, TV/FM/SATTriplexer and secondary telephoneoutlets for use within digital TVsystems and interactive TV services.
Single outlets for connection to asingle TV, FM or Satellite co-axialaerial lead.TV/FM diplexer units for connectionto a single co-axial aerial lead withcombined TV and FM signals.
K3552 WHI
K3553 DAB WHI
K3554 DAB WHI
K3561 DAB WHI
K3560 DAB WHI
K3563 DAB WHI
K3561 DAB WHITRIPLE TV/FM DAB/SAT TRIPLEXERWITH BT SECONDARY
K3562 WHITWIN TV/FM DIPLEXERWITH SINGLE TV (IEC MALE)AND BT SECONDARY
K3563 WHITRIPLE TV/FM/SAT TRIPLEXERWITH SINGLE TV (IEC MALE)AND BT SECONDARY
5
5
5
K3564 DAB WHI
K3565 DAB WHI
K3563 DAB WHITRIPLE TV/FM/SAT TRIPLEXERWITH SINGLE TV (IEC MALE)AND BT SECONDARY
K3564 DAB WHIQUAD TV/FM DAB/SATX2 QUADPLEXERWITH BT SECONDARY
K3565 DAB WHIQUADPLEXER + RJ45AND BT SECONDARY
5
5
5
36
wiring devices | white www.mkelectric.co.uk
Logic Plus
K3639 WHI12 MODULE
1
K3639 WHI
K3636 WHI
K3636 GRA6 MODULE
K3638 WHI
K3638 GRA8 MODULE
1
1
1
1
K3636 WHI
K3638 WHI
All modules from the Grid Plusrange can be used with thesefrontplates.
DIMENSIONS:1 & 2 MODULE: 86 x 86mm3 & 4 MODULE: 86 x 146mm6 & 8 MODULE: 146 x 146mm12 MODULE: 206 x 146mm
BS. 5733: 1995
K3631 WHI
K3631 GRA1 MODULE
K3632 WHI
K3632 GRA2 MODULE
K3633 WHI
K3633 GRA3 MODULE
K3634 WHI4 MODULE
10
10
10
10
10
10
10
K3631 GRA
K3632 WHI
K3634 WHI
K3633 GRA
Grid PlusFrontplates
ISOLATED
FLUSH
MOUNTING BOXES
FLUSH:861 ZIC
SURFACE: K2140 WHI
Provides safety isolation rated at2000Va.c. between aerial lead andsocket.Single outlet for connection to asingle TV or FM co-axial aerial lead. Twin outlet with TV/FM diplexer forconnection to single co-axial aeriallead with combined TV & FMsignals.
DIMENSIONS: 86 x 86mm
FIXING CENTRES: 60.3mm
BS. 5733: 1995 where applicableBS.3041: 1977 IEC 169-2: 1965
K3521 WHISINGLE OUTLET
K3522 WHITWIN OUTLET WITH FM/TV DIPLEXER
10
10
K3521 WHI
K3522 WHI
TV/FM andSatellite Co-AxialSocket Outlets
NON ISOLATED
FLUSH
MOUNTING BOXES
FLUSH:861 ZIC
SURFACE:K2140 WHI
Single outlet for connection to asingle TV or FM co-axial aerial lead.Twin outlet for connection to eachof two separate TV/FM, co-axialaerial leads.
DIMENSIONS: 86 x 86mm
FIXING CENTRES: 60.3mm
BS. 5733: 1995where applicable
BS.3041: 1977IEC 169-2: 1965
K3520 WHISINGLE OUTLET
K3523 WHITWIN OUTLET
K3525 WHISINGLE F TYPE SATELLITE SOCKET
K3525 D1 WHITWIN F TYPE SATELLITE SOCKET
10
10
10
10
K3520 WHI
K3523 WHI
K3525 WHI
K3525 D1 WHI
357
wiring devices | white www.mkelectric.co.uk
Logic Plus Technical
Switchsocket Outlets
Standards and approvals
All Logic Plus 13A socket outlets comply withBS 1363: Part 2: 1995.
Replacement fuses to the 3 gang socket outletscomply with BS 1362: 1973.
Description
A range of socket outlets designed for ease of installation and having all the advantageous designfeatures of the Logic Plus range. The 2 gang sockets with outboard rockers are of particular value for useby the infirm and partially sighted.
Non-standard clean earth sockets are for use on installations where restricted access is required and willonly accept MK LN647 13A non-standard plug with T-shaped earth pin. The sockets have twoindependent earth terminals so that they can also be used for ‘clean earth’ installations. K2746 CE WHIhas two independent earth terminals for ‘clean earth’ installations.
K781 WHI, K2657 WHI, K2737 WHI, K2746 WHI and K2757 WHI are fitted with two earth terminals ona common busbar to provide a double earth facility for use when installations are to comply with Section607 of BS 7671, IEE Wiring Regulations.
The products can be quickly installed as replacement for existing 13 amp sockets or in a new installation.
Fuse carriers(3 gang switchsocket only)
The fuse carrier is opened by a fast-acting, screwdriver-operated, worm-drive screw for ease ofreplacement.
Round pin sockets
A range of round pin sockets is also available, switched and unswitched.
Technical specification
Electrical
Voltage rating:250V a.c.
Current rating:13A per socket outlet(except 3 gang which is 13 amp in total)
Terminal capacity:Live, neutral & earth3 x 2.5mm2
3 x 4mm2
2 x 6mm2 (standard)(Dual earth terminals on list Nos. K781 WHI, K2657 WHI, K2737 WHI, K2746 WHI, K2757WHI)
Physical
Ambient operating temperature:–5°C to +40°C(not to exceed an average of more than 25°C in any 24hour period)
IP rating:IP2XD
Max. installation altitude:2000 metres
BOX TYPES
Flush Flush (for extra Surface Insulated Surface Metalwiring space)
1 gang 861 ZIC 866 ZIC K2140 WHI K2211 ALM/K2213 ALM
2 gang 862 ZIC 886 ZIC K2142 WHI K2212 ALM/K2214 ALM
3 gang K863 ZIC Not available K2153 WHI Not available
For a full range of corresponding products,
see pages 18-36 in the product selector.
358
technical hotline +44 (0)1268 563720 white | wiring devices
Logic Plus Technical
Switchsocket Outlets
● Moulded ‘on’ indicator flash on switcheswill not rub off – totally safe
● Optional neon indicators in the switchrockers with 175° visibility in the horizontaland vertical planes
● 3 pin operated safety shutter
● Printed terminal markings on grey rearmouldings for clearer identification
● Top access, angled terminals make wiringeasier and quicker
● 3mm switch contact gap
● Double pole switching
● Choice of inboard or outboard positionedrockers
● Additional electrical safety from neutral‘make first’, ‘break last’ feature
● Switch contacts with silver contacts onboth surfaces for good continuity
● Only one size of screwdriver required forinstallation
● Dual earth terminals for high integrityearthing on list Nos. K781 WHI,K2657 WHI, K2737 WHI, K2746 WHI,K2757 WHI
● Backed out and captive terminal screws
● ‘Clean earth’ sockets available
● Non-standard ‘clean earth’ socketsavailable
Features
Installation
Logic Plus socket outlets can be wall or benchmounted. Do not mount or use as a trailingsocket or where they may be subject to excessivemoisture or dampness.
2 gang switchsocket – view from rear
Top-facing, angled, backed-out terminals makewiring easier and quicker.
Cable management
Logic Plus socket outlets can be mounted in avariety of MK trunking systems.
86 30
86
60.3 17
146 30
86
120.6 17
146 30
86
120.6 17
206 32
86
180.9 19
fusefuse
1 gang
Dimensions (mm)
2 gang
3 gang
359
wiring devices | white www.mkelectric.co.uk
Logic Plus Technical
Sentrysocket RCD Protected Switchsocket Outlet
Description
Sentrysocket provides a high level of protection against electrocution and gives further protection whenused with appliances vulnerable to insulation damage, particularly when they are in damp environmentsor outdoors. Sentrysocket is not suitable for mounting in damp environments or outdoors.
Sentrysocket, incorporating an RCD, is part of a complete range of fixed and portable wiring devices andcircuit protection devices suitable for use in domestic, commercial and industrial applications.
Active control circuits
Incorporate a ‘Re-set’ mechanism and are mains failure sensitive, ie they will function under all thenormal conditions expected of an RCD, but will also trip in the event of a power cut or a sudden, dramaticreduction in mains voltage. This makes them ideal for use where it would be hazardous for equipmentto suddenly energise after return of mains power, such as use with rotating machinery and heatdeveloping apparatus.
Passive control circuits
Incorporate a ‘Stay-set’ mechanism and is mains failure proof, ie it will function under all the normalconditions expected of an RCD and will not trip in the event of a power cut. This makes it suitable for usewith freezers or in inaccessible or unmanned locations.
Technical specification
Electrical
Rated Voltage:240V a.c., 50 or 60Hz
Current rating:13A resistive
Rated tripping current30mA and 10mA versions
Terminal capacity:3 x 4mm2
Physical
Ambient operating temperature:–5°C to +40°C
IP rating:IP2XD
Max. installation altitude:2000 metres
Sentrysockets are only suitable for use in TN-S systemwhere the Supply Neutral Connection is connected to theSupply Earth.
They are not suitable for connection across two lines of a127V line to Neutral Voltage System.
● Suitable for most residential, commercialand light industrial applications
● Active and passive control circuitapplications
● Comply fully with current WiringRegulations
● Double pole switching
● Flexible and versatile in use
● Ideal for use with equipment subject towet weather or high humidity
● Part of a complete range of MK circuitprotection devices
● They are pulsating DC sensitive for residualcurrent
Features
Cable management
Sentrysockets can be mounted in a variety of MKtrunking systems.
Compliance with EC Directives,Standards and approvals
All Sentrysockets comply with the following EC Directives and are CE marked:
Low Voltage Directive (73/23/EEC)Electromagnetic Compatibility Directive (89/336/EEC)
Sentrysocket RCD Single Sockets also comply with the requirements of the following standards:
BS 7288: 1990 (1993)BS 2011 Part 2.1 Db (Damp Heat - cyclic)BS 2011 Part 2.1 Ka (Salt mist)BS EN 50082-1
Sentrysocket RCD Double Sockets comply with BS EN 61543:1996
Installation
Flush mounting steel wall box
It should be noted that some of the conduitentries may be restricted, depending upon theirpositions and the depth of box used.
146 24
86
120.6 14
sentrysocketrcd protected
TT test before usepress button - Twhite
off(tripped)
redon on
active controldevice trips with
loss of mains10mA tripping current
6 146 22
86
120.6 14
8
sentrysocketrcd protected
T
R
Flag below Reset (R) button.Red : ON Black: OFF
ALWAYS TEST BEFORE USEPress Test (T) button, Red flag shoulddisappear. If it does not, do not use.
Press Reset (R) after testing.
Dimensions (mm)
Double socketSingle socket
360
technical hotline +44 (0)1268 563720 white | wiring devices
Logic Plus Technical
Filtered Switchsocket Outlets
Description
A range of sockets in the Logic Plus style, designed to combat interference to or data losses on sensitiveelectrical products and systems due to mains borne voltage spikes and RFI.
Such systems include:
● Computer or microprocessor based equipment
● Telecommunications systems
● Electronic measurement equipment
● Cash registers
● Audio visual and hi-fi equipment
These products can be quickly installed as replacements for existing twin 13 amp sockets or in a newinstallation.
Two earth terminals on each product enable use in installations complying with Section 607 (HighIntegrity Earthing) of BS 7671 IEE Wiring Regulations.
Filter cassettes
Filter cassettes are supplied with sockets and have an LED which shows green under normal conditionsbut will turn red or extinguish when a replacement cassette (K1800) is required. An alarm will also beepat 5 second intervals to indicate replacement necessity. It can be de-activated if required.
Technical specification
Electrical
Current rating:13A maximum total for 2 sockets
Voltage rating:250V a.c. 50Hz
Earth leakage:0.5 mA
Suppression:150 kHz – 30 MHz (transients)
Maximum energy absorption:140 Joules L – N140 Joules L – E
Terminal capacity:K1826 and K1816, 2 x 6mm2
3 x 4mm2, 3 x 2.5mm2, 3 x 1.5mm2
Physical
Operating temperature:–5°C to +40°C (not to exceed an average of more than25°C in any 24 hour period)
Thermal overload:The K1826 filter socket incorporates a thermal overloaddevice in the RFI filter section. Overload current causestemperature rise, resulting in automatic ‘trip out’. Theoverload device will re-set as the temperature falls.
IP rating:IP2XD
Max. installation altitude:2000 metres
● Moulded ‘on’ indicator flash on switcheswill not rub off – totally safe
● 3 pin operated safety shutter
● Printed terminal markings on grey rearmouldings for clearer identification
● Reduces risk of damage to equipment anddown time
● Reduces risk of data loss
● 2 way filtering – into appliance and backinto mains supply
● Double pole switches
● Twin earth terminals for use in installationscomplying with Section 607 of BS 7671IEE Wiring Regulations
● Clearly visible LED on filter cassette,changes from green to red whenreplacement required
● Simple replacement of cassettes
● 10 year guarantee (except filter cassette)
● 3mm switch contact gap
● Backed out and captive terminal screws
FeaturesCable management
Logic Plus socket outlets can be mounted in avariety of MK trunking systems.
146 30
86
120.6 17
Dimensions (mm)
361
wiring devices | white www.mkelectric.co.uk
Logic Plus Technical
Round Pin Socket Outlets
Standards and approvals
Round pin socket outlets comply with BS 546: 1950.
Description
A range of round pin socket outlets designed for ease of installation and having all the advantages anddesign features of the round pin Logic Plus range. These products can be quickly installed as replace-ments for existing socket outlets or in new installations.
Installation
Logic Plus socket outlets can be wall or benchmounted – do not mount or use as a trailingsocket or where they may be subjected toexcessive moisture or dampness.
Technical specification
Electrical
Voltage rating:250V a.c.
Terminal capacities:2 amp sockets (K770):7 x 1mm2
4 x 1.5mm2
2 x 2.5mm2
1 x 4mm2
5 amp sockets (K771, K2891):3 x 2.5mm2
2 x 4mm2
2 x 6mm2 (stranded)15 amp sockets (K772, K2893, K2493):3 x 2.5mm2
3 x 4mm2
2 x 6mm2 (stranded)
Physical
Ambient operating temperature:–5°C to +40°C(not to exceed an average of more than 25°C in any 24hour period)
IP rating:IP2XD
Max. installation altitude:2000 metres
● Top access terminals make wiring easierand quicker
● Integral ON indicator on switches will notrub off – totally safe
● Optional neon indicator on 15A switchedsocket rockers with 175° visibility in thehorizontal and vertical planes
● 3mm switch contact gap
● Double pole switching
● Terminal screws backed out
● Additional electrical safety from neutral“make first”, “break last” feature onswitched sockets
● Switch contacts with silver contact pointson both surfaces for good continuity
● 5A and 15A sockets contain a 3 pinoperated safety shutter
● Printed terminal markings on grey rearmouldings for clearer identification
● 2A socket shuttered
Features
Cable management
Logic Plus socket outlets can be mounted in avariety of MK trunking systems.
86
86
60.2
Depth2 Amp sockets: 12mm5 Amp sockets: 21mm15 Amp sockets: 23mm
Dimensions (mm)
BOX TYPES
Flush for extraFlush wiring space Surface Insulated Surface Metal
5A and 15A 861 ZIC 866 ZIC K2140 WHI K2211 ALMK2213 ALM
2A 3995 ZIC 866 ZIC K2140 WHI K2211 ALM861 ZIC K2213 ALM
362
technical hotline +44 (0)1268 563720 white | wiring devices
Logic Plus Technical
NON UK Socket Outlets
Standards and approvals
15A American sockets comply with SSA: 444: 1985
16A Universal sockets comply with BS.5733: 1995
16A 2P+E German sockets comply with IEC 60884-1: 2002
Technical specification
Electrical
15A American
Voltage rating:127V a.c.
Current rating:15A
Terminal capacity:Live, neutral & earth3 x 2.5mm2
2 x 4mm2
1 x 6mm2 (stranded)
Max. installation altitude:2000 metres
16A Universal Socket
Voltage rating125/250V
Current rating:16A
Terminal capacity2 x 6mm2 (stranded)3 x 4mm2 3 x 2.5mm2
16A 2P+E German Socket
Voltage rating:250V a.c.
Current rating:16A
Terminal capacity:Live, neutral & earth4 x 1.5mm2
2 x 2.5mm2
1 x 4mm2
Physical (all NON UK outlets)
Ambient operating temperature:–5°C to +40°C(not to exceed an average of more than 25°C in any 24hour period)
IP rating:IP2XD
Max. installation altitude:2000 metres
86
86
60.3
146 9
86
120.6 15
86
86
60.3
146
86
120.6
9
30
15A AMERICAN
BOX TYPES
Flush Flush (for extra Surfacewiring space)
1 gang 861 ZIC 866 ZIC K2140 WHI
2 gang 862 ZIC 886 ZIC K2142 WHI
16A UNIVERSAL 86
86
60.3
9
21Description
The universal socket does not incorporate an earth contact.Therefore, appliances needing earth connection (class 1equipment) must NOT be used with this socket. The socket isintended for use with BS, USA and CEE standard plugs.
16A 2P+E GERMAN
BOX TYPES
Flush Surface
861 ZIC K2140 WHI
BOX TYPES
Flush Surface
1 gang 866 ZIC K2031 WHI
2 gang 886 ZIC K2172 WHI
Note: 16A 2P+EGerman Outlet:These products arenot suitable for25mm deep boxes.
All dimensionsin mm
All dimensionsin mm
All dimensionsin mm
363
wiring devices | white www.mkelectric.co.uk
Logic Plus Technical
Three Pole Fan IsolatorsStandards and approvals
Comply with BS EN 60947: 1992
● Switchlock list no. K4858 is available toallow the isolator to be locked in thedisconnected position to facilitate fanmaintenance
Features
Description
The MK Three Pole Fan Isolator provides a safe and simple method of isolating mechanical fan units andis particularly useful in bathrooms, toilets, storerooms and basements where there is little or no naturallight.
For example, timer controlled fans are often linked into the lighting circuit for energy saving andconvenience. In such an installation there is often a need for the lighting circuit to remain live to providelight whilst the fan unit is externally isolated so that routine maintenance and repairs can be carried outin complete safety.
The fan isolator can be used as a double pole or triple pole isolator. In addition it includes a clear on/offindicator and the frontplate features a fan isolator symbol for easy circuit identification.
85
85
60.3 12
on
offisolator
9
Dimensions (mm) BOX TYPES
Flush Surface
3995 ZIC K2160 WHI
Technical specification
Electrical
Voltage rating:250V a.c. 50Hz
Current rating:10 amps
Terminal capacity:4 x 1mm2
4 x 1.5mm2
3 x 2.5mm2
2 x 4mm2
1 x 6mm2
Contact gap:3mm switch contact gap
Classifications
Method of operation: Stored energy operationSuitability for isolation: Suitable for isolation
Ratings
Utilisation category AC23BRated operational voltage (Ue) 250VConventional free air thermal current (Ith) 10ARated frequency 50HzRated making capacity 100A rmsRated breaking capacity 80A rmsRated conditional short-circuit current 6000A rms (with supply side protective device GEC NIT 16 BS88: part 2: 1988 16A 550VAC utilisation category gG 80KA breaking capacity fuse links.)
Physical
Operating temperature:–5°C to +40°C)
IP rating:IP4X
Max. installation altitude:2000 metres
364
technical hotline +44 (0)1268 563720 white | wiring devices
Logic Plus Technical
Three Pole Fan Isolators
L2L1 NL2L1 N
N
Rear view ofFan Isolator
Rear view ofFan Isolator
Rear view ofFan Isolator
Rear view ofFan Isolator
L (switched)
NL
Supply
L2L1 NL2L1 N
NL (unswitched)
To Fan Unit with Timer(see Fan Unit Intructions)
L (switched)
NL
Supply
L2L1 NL2L1 N
NL (unswitched)
To Fan Unit with Timer(see Fan Unit Intructions)
L (switched)
NL
Supply
L2L1 NL2L1 N
N
To Fan Unit without Timer(see Fan Unit Intructions)
To Fan Unit without Timer(see Fan Unit Intructions)
L (switched)
NL
Supply
Three pole switching for fan units incorporating timers
Two pole switching for fan units without timers
TOP
TOP
TOP
TOP
Wiring diagrams
365
wiring devices | white www.mkelectric.co.uk
Logic Plus Technical
Shaver Socket Outlets
Description
Designed for ease of installation and having many of the advantageous features of the Logic Plus range.
The shaver socket outlet accommodates the following plugs:
British 5mm dia pins on 16.6mm pitch (230V socket) to BS 4573: 1970.
European 4mm dia pins on 17 to 19mm pitch (230V socket) to IEC 83: 1975 Standard C5.
Australian 6.5 x 1.6 flat blades each set at 30° to the vertical on a nominal pitch of 13.7mm (230V socket)AS C112: 1964.
The fuse carrier is captive and opened by a fast acting, screwdriver operated worm drive screw for easeof replacement.
Installation
Shaver socket outlets may be wall or benchmounted.
This shaver socket must not be used inbathrooms and washrooms. Non-isolated, fused,shaver socket outlets must never be installed inany location subject to splashes, condensation ordamp conditions.
For installation in any other room where a washbasin or shower cubicle is installed then refer tothe current IEE wiring regulations.
Technical specification
Electrical
Voltage rating:200-250V a.c. Input
Maximum load:200 mA (internal thermister trip current)
Terminal capacities:Each terminal will accommodate 1 x 4mm2,or 2 x 2.5mm2, 3 x 1.5 solid conductors
Physical
Ambient operating temperature:–5°C to +40°C
IP rating:IP2XD
Max. installation altitude:2000 metres
● Top access terminals make wiring quickerand easier
● Only one size of screwdriver required forinstallation
● Terminal screws supplied ‘backed out’ andheld captive within the terminal moulding
● Printed terminal markings on grey rearmouldings for clearer identification
● Front plate fixing screws retained on rearcase moulding
Features
Cable management
Logic Plus socket outlets can be mounted in avariety of MK trunking systems.
Standards and approvals
Shaver socket outlets comply withBS 4573: 1970 and IEC 884-1: 1994.
Plug pin apertures, and engagement face dimensions complywith BS 4573: 1970.
Dimensions (mm)
86 9
86
60.3 20
shavers only
200 - 250V ac
fusefuse
366
technical hotline +44 (0)1268 563720 white | wiring devices
Logic Plus Technical
Shaver Supply Units
Description
Designed for ease of installation and having many of the advantageous design features of the Logic Plusrange.
May be used in bathrooms and washrooms – must only be installed in accordance with the current IEEWiring Regulations BS 7671: 1992: Amendment 3.
Installation
Shaver supply unit should be wall mounted.
Wiring
An installation instruction leaflet is available.List no. 44994 PL.
● Bottom access terminal screws make wiringquicker and easier
● Automatic primary supply switching oninsertion of plug
● Choice of 230V or 115V output socketpositions
● Safety interlocked shutters to preventinsertion of two plugs simultaneously
● Only one size of screwdriver required forinstallation
● Terminal screws supplied ‘backed out’ andheld captive within the terminal moulding
● Printed terminal markings on grey rearmouldings for clearer identification
● Front plate fixing screws retained on rearcase moulding
● Integral over current device to protecttransformer
Features
Standards and approvals
Shaver supply units comply with BS 61558-2-5: 1998
Accommodates plugs as follows:
● British 5mm dia pins on 16.6mm pitch (230V socket) to BS4573: 1970.
● European 4mm dia pins on 17 to 19mm pitch (230V socket) toIEC 83: 1975 Standard C5.
● Australian 6.5 x 1.6 flat blades each set at 30° to the verticalon a nominal pitch of 13.7mm (230V socket) AS C112: 1964.
● American 6.6 x 1.6 flat horizontal blades on 12.7mm pitch(115V socket) to ANSI C73.10.
146
986
35
shavers only
230V115V
Dimensions (mm)
Technical specification
Electrical
Voltage rating:K701: 230V a.c. Input (will operate at 220-250V a.c.)K706: 127V a.c. Input (will operate at 110-130V a.c.)230V or 115V nominal outputs
Current rating:K701: 200mA max. (internal thermister trip current)K706: 400mA max. (internal thermister trip current)
Maximum load:20VANo load voltage < 275V
Terminal capacities:Each terminal will accommodate 1 x 4mm2 or2 x 2.5mm2 solid conductors*
Physical
Ambient operating temperature:–5°C to +40°C
IP rating:IP41 (In Zone 2 if fixed where direct spray from showers isunlikely)
Max. installation altitude:2000 metres
*The design of this unit means that on no load thetransformer output is allowed to be as high as 275V. Thismeans that rechargeable shavers intended for use on thecontinent may be damaged by the inrush current createdby this higher voltage. Rechargeable shavers with a widerange of input voltage should be recharged at 115V.Shavers manufactured for the UK are designed to be usedwith a transformer unit. Loads in excess of 20VA maycause the solid state overload to operate before shaving iscompleted. This is to protect the transformer.
367
wiring devices | white www.mkelectric.co.uk
Logic Plus Technical
Connection Units, 20A Switches and Flex Outlets
Standards and approvals
All Logic Plus connection units comply with BS 1363: Part 4: 1995.
The 20A DP switch complies with BS EN 60669-1: 2000
The flex outlet plate complies with BS 5733: 1995.
Fuses are to BS 1362.
Description
A range of 13A fused connection units and 20A DP switches designed for the connection of refrigerators,water heaters, central heating boilers and other fixed appliances.
The ranges are designed for ease of installation and have the advantageous design features of the LogicPlus range.
Neon indicators
Neon indicators can be included in the rockers of the switched connection units. In the case ofunswitched units, they can be located centrally and uppermost on the face plate. Neon indicators areintegrally wired into the product and do not require separate connection when installing.
The design gives 175° visibility in the horizontal and vertical planes.
Fuse carriers
These are captive and are opened by a fast acting, screwdriver operated worm drive for ease ofreplacement.
A tamper-proof version is also available.
Fuse carriers can be locked open using a padlock, List No. K2000.
Flex outlets
Bottom outlet types are supplied with blanking plug allowing use where the bottom outlet is notrequired. Spare blanking plugs are available.
The products are equipped with very strong, push-fit nylon cord grips making installation safe, quick andeasy.
Flex outlet plate
An unfused flex outlet with cord grip plate and 3 pairs of terminals.
Installation
Logic Plus connection units and 20A cable outletsand switches can be wall or bench mounted. Donot use on a trailing lead.
Wiring
Products must be installed in accordance withcurrent IEE Regulations. Cable Management
Logic Plus connection units and DP switches canbe mounted in a variety of MK trunking systems.
Technical specification
Electrical
Voltage rating:250V a.c.
Current rating:Connection units – 13 ampDP switches – 20 ampFlex outlets – 20 amp
Terminal capacity:
Supply terminal: 2 x 6mm2 stranded2 x 4mm2
3 x 2.5mm2
Load terminals: 2 x 6mm2 stranded2 x 4mm2
3 x 2.5mm2
Flex outlet/cord grip capacities:
Connection units: min: 2 core, 0.5mmmax: 3 core, 1.5mm20 amp DP switches & flex outlet platemin: 3 core, 1.5mmmax: 3 core, 2.5mm
Physical
Ambient operating temperature:–5°C to +40°C(not to exceed an average of more than 25°C in any 24hour period)
IP rating:With flex outlet: IP2XDWithout flex outlet: IP4X
Max. installation altitude:2000 metres
368
technical hotline +44 (0)1268 563720 white | wiring devices
Logic Plus Technical
Connection Units, 20A Switches and Flex Outlets
● Optional indicators in the switch rockerswith 175° visibility in the horizontal andvertical planes
● Worm-drive operated fuse carriers foradditional security (tamper-proof versionavailable)
● Fuse carrier lockable in open position
● All supply and load cables can be cutand stripped to the same length
● Integrally wired indicators saveinstallation time
● Push-fit cord grips, for safer, quickerinstallation
● Angled, top mounted terminal screwssimplify wiring
● Moulded ‘on’ indicator flash on switchescannot rub off – totally safe
● Captive fuse carrier
● Additional electrical safety from neutral‘make first’, ‘break last’ feature
● Secure cable and flexible cordconnection
● All terminal and fixing screws operatedby one-size (4mm) screwdriver
● Backed out and captive terminal screws
Features Dimensions (mm)
86 19
86
60.311 dia
fusefuse
9
86 15
86
60.3
fusefuse
13
13
Products with front flex outlet Products with flex outlet in baseand thick frontplate
Supply and load cable cords cutand stripped to same length
Front outlet cord grip Lockable fuse carrier
Bottom outlet andcord grip
Blanking plug forbottom outlet
Note: These switches are not recommended forswitching large banks of PCs
PLEASE NOTE THAT THE TERMINAL LAYOUT OF THE FLEX OUTLET, K1090, IS DIFFERENTTO THAT SHOWN ABOVE. ALL OTHER PRODUCTS ARE AS INDICATED.
369
wiring devices | white www.mkelectric.co.uk
Logic Plus Technical
High Current Switches and Cooker Control Units
Description
A range of switches and cooker control units harmonising with the Logic Plus style, suitable for theswitching of all domestic, commercial and industrial appliances where higher current ratings arerequired, i.e. cookers, heaters, commercial refrigeration units etc. Metal units are particularly suitable forrefurbishment projects.
● Positive switch action
● Positive double pole switching
● Toggle action switches
● Metal front plates available
● Replaceable neon indicators
● Wide product choice
Features
Note: These switches are not recommended forswitching large banks of PCs
Standards and approvals
All DP switches in the range conform to BS EN 60669-1:2000
All Cooker Control Units in the range conform to BS 4177: 1992(1993). ‘Specification for cooker control units’.
Cooker Connection Unit conforms to BS 5733: 1995
BOX DEPTHS
List No. Max. Cable Size Flush Surface
Switches
K5105 WHI 6mm2 35mm 30mm10mm2 46mm 40mm
K5205 WHI 6mm2 35mm 40mm10mm2 46mm 40mm
K5215 WHI 6mm2 35mm 40mm10mm2 47mm 40mm
K5230 WHI 10mm2 – Supplied with box
K5012 WHI 10mm2 55mm –
Cooker control units
K5040 WHI 10mm2 – Supplied with box
K5041 WHI 10mm2 – Supplied with box
K5060 WHI 6mm2 35mm –10mm2 47mm –
K5061 WHI 6mm2 35mm –10mm2 47mm –
K5001 WHI 10mm2 – Supplied with box
K5011 WHI 10mm2 55mm –
BOX REFERENCES
Flush Surface
Box depth 1 gang 2 gang 1 gang 2 gang
30 – – K2140 WHI –
35 886 ZIC 886 ZIC – –
40 – – K2301 WHI K2172 WHI
46 877 ZIC – – –
47 – 878 ZIC – –
55 5120 ALM (Cooker) – –
Technical specification
Electrical
Voltage rating:250V a.c.
Current:32A/45A resistive
Switch:3mm contact gapDouble pole operation – except socket switch on CCUs
Terminal capacity, 45A Switches and CCUs:4 x 4mm2
3 x 6mm2
1 x 16mm2
Terminal capacity, 32A Switch:3 x 2.5mm2
2 x 4mm2
1 x 6mm2
Physical
Ambient operating temperature:–5°C to +40°C(not to exceed an average of more than 25°C in any 24hour period)
IP rating:IP2XD (K5061, K5060, K5041, K5040, K5001, K5011)IP4X (K5105, K215, K5205, K5215CK, K5215SH, K5230,K5011)
Max. installation altitude:2000 metres
370
technical hotline +44 (0)1268 563720 white | wiring devices
Logic Plus Technical
High Current Switches and Cooker Control Units
86
86
60.3
12
off
on
146 120.6
86
off
on
19 146 57
86 89
120.6
off
on
off
on
socketcooker
Dimensions (mm)
148 120.6
87 49
off
on
146
120.6
off
on
off
on
socketcooker
86
13
143 60
156off
oncooker
off
onsocket
105
166
179off
oncooker
off
onsocket
105
19 166
179off
on
133
19
K5105 K5061 or K5060 (without pilot lights)
K5215 orK5205 without pilot lightK5215CK printed ‘cooker’K5215SH printed ‘shower’
K5041 or K5040 (without pilot lights)
K5230 K5001
K5011 K5012
371
wiring devices | white www.mkelectric.co.uk
Logic Plus Technical
Plateswitches
Standards and approvals
All Logic Plus plateswitches comply with BS EN 60669-1: 2000 orBS 3676: Part 1, 1989.
Description
Logic Plus plateswitches are designed to blend in with the decor, whilst complementing a wide range ofother Logic Plus accessories. They are designed for easy installation in plaster depth boxes and aresuitable for controlling lighting circuits in domestic, commercial and industrial applications.
Neon locator
A textured, polycarbonate moulding allowing the glow of the neon to be seen at almost any angle.Designed to complement the Logic Plus 1, 2, or 3 gang plateswitches.
It is easy to install in existing locations. For 3 gang applications using a 25mm deep box simplifies wiring.
Technical specification
Electrical
Voltage rating:250V a.c. 50Hz
Current rating:10 amps – no derating when used on fluorescent or inductive loads
20 amps – no derating when used on fluorescent or inductive loads
Terminal capacity:All products except K4870/71/724 x 1mm2
4 x 1.5mm2
3 x 2.5mm2
2 x 4mm2
1 x 6mm2
For products K4870/71/724 x 1mm2
4 x 1.5mm2
2 x 2.5mm2
1 x 4mm2
Contact gap:3mm switch contact gap
Physical
Operating temperature:–5°C to +40°C)
IP rating:IP2XD
Max. installation altitude:2000 metres
Operational testing (all plateswitches):tested to 100,000 operations for mechanical lifetested to 30,000 operations at 10 amp ratingtested to 10,000 operations at 20 amp rating
Cable Management
Logic Plus plateswitches can be mounted in avariety of MK trunking systems.
● Two way switches can be wired as oneor two way
● All products clearly printed withBS Nos., ratings, etc
● Matching Grid switches available in10 or 20A ratings
● 3mm switch contact gap
● Positive switch action
● Top access, backed out and captiveterminal screws
● Neon locator available making switcheasy to find in darkened rooms
Features
372
technical hotline +44 (0)1268 563720 white | wiring devices
Logic Plus Technical
146
85
120.6
85
85
60.3
85
85
60.3
85
85
60.3
85
85
60.3 12
85
85
60.3
85
85
60.3 12
146
85
120.6 12
32
85
60.3
12
32
146
120.6
12
Sectional drawings show the furthest projections from the back of thefrontplate (wall surface).
Dimensions (mm)
1 gang 2 gang 3 gang
4 gang 6 gang
1 gangarchitrave
2 gangarchitrave
Plateswitches
Wiring Diagrams
One-way switching
Two-way switching – 2 wire control
Two-way switching – 3 wire control
Two-way switching plus intermediate switching – 2 wire control
Two-way switching plus intermediate switching– 3 wire control
NL 1
Common
Lamp/s
NL
Lamp/s
21
Common
12
Common
Two-way switches
Dotted lines show alternative switch positions
NL 21
Common
21
Common
Two-way switches
Dotted lines show alternative switch positions
Lamp/s
SW.L
NL 12
Common
21
Common
Two-wayswitch
Two-wayswitch
Dotted lines show alternative switch positionsLamp/s
1
1
2
2Intermediateswitch
L
1
1
2
221
Common
21
Common
Two-wayswitch
Two-wayswitch
Dotted lines show alternative switch positions
Intermediateswitch
NLamp/s
SW.L
N.B. Terminal positions may alter. The above diagrams are toshow wiring layout.
373
wiring devices | white www.mkelectric.co.uk
Logic Plus Technical
Dimmer Switches
Standards and approvals
All CE marked Logic Plus dimmer switches comply with the ECLow Voltage Directive: 73/23/EEC, Electromagnetic Compatibility Directive 89/336/EEC
They also comply with BS EN 60669-2-1and BS EN 55015
Non-UK dimmer switches conform to the relevant parts of BS5518.
Description
MK Dimmer Switches fall into three categories:1) Standard Dimmer Switches2) Intelligent Dimmer Switches3) Non-UK Dimmer Switches
Standard Dimmer Switches
Dimmer Switches belonging to this category employ simpler electronic circuitry and the CE markedproducts make use of thermal switches to conform to the very stringent requirements of the StandardBS EN60669-2-1, for overload protection. They are only suitable for use with normal tungsten filamentlamps with internal fuses, conforming to BS EN 60064: 1996 and BS EN 60432-1 Standards and do nothave any added features, e.g. soft start, ability to control dimmable transformers for low voltage, etc.
Standard Dimmer Switches are not suitable for use with transformers for Low VoltageLighting or Fluorescent Loads, including Energy Saving Lamps.
Intelligent Dimmer Switches
Dimmer Switches belonging to this category, employ the latest, state of the art, micro-controller basedelectronic circuitry and use current sensing to compute the load conditions. These products showprogressive reaction to overload conditions, depending on the extent of overload as shown in the tablebelow. List numbers belonging to this category are identified by the suffix letters LV, e.g. K1501 WHI LV.All MK Intelligent Dimmer Switches employ one pole change over switches to facilitate two wayswitching.
MK Intelligent Dimmer Switches are not suitable for use with Fluorescent Loads, includingEnergy Saving Lamps.
Only one Dimmer Switch can be used in a two-way switching circuit.
Technical specification
Electrical
Mains Supply Voltage:230V a.c. (Nominal)220V a.c. (Nominal, Non-UK)127V a.c. (Nominal, Non-UK)
Mains Supply Voltage Range:216V a.c. to 253V a.c.200V a.c. to 250V a.c120V a.c. to 134V a.c.
Mains Supply Frequency:50Hz ±3Hz60Hz ±3Hz
Type of Loads:
Standard Dimmers:Fused GLS Tungsten Filament lamps only to BS EN 60064:1996 and BS EN 60432-1: 2000,rated at 230/240V
Intelligent Dimmers:Fused GLS Tungsten Filament lamps to BS EN 60064: 1996and BS EN 60432-1,2 rated at 230/240V. Dimmable wirewound or electronic Low Voltage Transformers of goodquality. Can also be used with good quality mains voltagehalogen lamps incorporating GU10 bases. Please checkwith lamp manufacturer to determine suitability.
Note: Transformer must be suitable for dimming usingphase delay (leading edge) and NOT only phase cut(trailing edge) type of dimmers.
Warning: These dimmer switches are not suitable for usewith Fluorescent Lamps or Energy Saving Lamps.
Physical
Operating temperature:0°C to +40°C)
IP rating:IP2XD
Max. installation altitude:2000 metres
OVERLOAD REACTION
Case Approximate load Power output to load when dimmer controlon the dimmer as is set to maximuma percentage of itsmaximum load
1 Up to 130% Load will receive maximum power continuously.
2 >130% to 200% Output to load will be reduced to 50% of the maximum after a delay of approximately 20 seconds after switch on.
3 >200% Output will be disabled (load will be switched off) almost instantaneously after switch on.
Non-UK Dimmer Switches
Dimmer switches belonging to this category only conform to the safety parts of BS EN 60669-2-1,without conforming to the EMC requirements. Loads suitable for use with standard dimmer switchesabove are also suitable for use with this category of dimmer switch.
374
technical hotline +44 (0)1268 563720 white | wiring devices
Logic Plus Technical
Dimmer Switches
Dimensions (mm)
86 28
60.3 23
16
1986
N
L
L1
L2C
Two-way switching(only one dimmer can be used)
L1
L2
C
LoadDIMMERSupply 230V a.c. - 50Hz
2 way switch
L
N
One-way switching
L1
L2
CLoad
DIMMERSupply 230V a.c. - 50Hz
Wires must be connected to the correct dimmer terminals.DO NOT connect earth to dimmer.
Intelligent Dimmer Switches incorporate the following advancedfeatures
● Suitable for dimming Low Voltage Halogen lamps via good quality,fully dimmable electronic or wire-wound transformers
● Can be used with good quality mains voltage halogen lampsincorporating GU10 bases. Please check with lamp manufacturer todetermine suitability
● Load current sensing:These dimmers continuously monitor the load current to helpprotect against overheating in wire wound transformers and toprevent overloading of the dimmer for long term reliability.
● Soft Start, which gradually increases the light output from the loadover 1 to 3 seconds after switch on. The Soft Start feature is alsoparticularly beneficial when used to dim Mains Voltage TungstenHalogen lamps which have inherent very high inrush current atswitch on
Standard Dimmer Switches
● Suitable only for use with fused GLS Tungsten Filament lamps to BSEN 60064 and BS EN 60432-1
● One way dimmer switches incorporate manual soft start
● Incorporate thermal switches for protection against overload
Features
Please note the dimmer may be substituted forany of the Two-Way switches
INTELLIGENT DIMMER SWITCHES
Rating Max No. of Transformers(total rating of all transformers must not exceed maximum VA rating of dimmer)
1 gang single 40-300W (LV and mains voltage 4dimmer halogen rating 40-240W/VA)
1 gang double 2 x 40-300W (LV and mains voltage 4 per dimmerdimmer halogen rating 2 x 40-240W/VA)
1 gang single 60-500W (LV and mains voltage 5dimmer halogen 60-400W/VA)
375
wiring devices | white www.mkelectric.co.uk
Logic Plus Technical
Euro and LJU6C Data Frontplates
● 1G and 2G frontplates
● Logic Plus style
● Colour matched to MK Logic Plus range
● Accept industry standard (Euro) andLJU6C snapfit modules
● 1G Euro frontplate accepts 2 Euromodules, (50 x 50mm aperture)
● 2G Euro frontplate accepts 4 Euromodules, (100 x 50mm aperture)
● 2G LJU6C frontplate accepts two LJU6Cmodules (27 x 37mm aperture)
● 1⁄2 module (12.5 x 50mm) blankavailable for Euro frontplates
Features
Standards a