Upload
-
View
227
Download
1
Embed Size (px)
DESCRIPTION
Â
Citation preview
AJ Eklipta led
Design: Arne Jacobsen
AJ Eklipta was designed by Arne Jacobsen in 1959 for Rødovre
Town Hall. He originally designed the light in two sizes: Ø 350 and
Ø 450, and later used a smaller version – Ø 220 – for St. Catherine’s
College in Oxford.
AJ Eklipta is an ultra-minimalist product which, in addition to fea-
turing a unique lighting concept, is designed with great enthusi-
asm for highlighting the unique opportunities offered by the ma-
terials. The clear glass edge that surrounds the fixture evokes a
halo around the opalised surface when the light is both on and off.
It is a beautiful, spectacular touch that clearly demonstrates Arne
Jacobsen’s keen eye for even the smallest detail.
AJ Eklipta
The light concept is a diffuse, 100% glare-free light. This is achieved
by opalising the glass, and together with the thickness of the glass
itself and the distance from the light source, this surface appears
evenly lit. Moreover, on account of the arched shape of the glass,
it provides a graded light surface that emphasises the curvature of
the fixture and boosts lighting comfort.
Irrespective of the light source, the goal has always been to create
the most uniform surface possible without major differences in lu-
minance. The fixture body creates a distance from the wall and al-
lows lighting of the mounting surface, thus forming a halo-like ef-
fect around the fixture itself and contributing to enhancing the
dimensions.
Ø 350Ø 220 Ø 450
Fixture bodyThe Ø 220 fixture body acts as a heat sink. Creates distance to the wall surface
· easy to fit· easy access to technical parts
· optimal light distribution· optimised for each size· easy to install and maintain the LED board and driver· long service life: (Ø 350/Ø 450) 50,000 hours LED/Driver (Ø 220) 40,000 hours LED
· opalisation guards against glare· 3-layer glass· uniform construction of the glass surface with smooth transitions in luminance
LED BoardSpecially designed for each size.Ø 350/Ø 450: 3000K/4000KØ 220: 2700K/3000K
DiffuserMouth-blown 3-layer glass, opalised
KPI
AJ Eklipta emits a soft, diffuse light. Opalised white,
the glass dome generates a pleasant light that ap-
pears to flow across the wall. This is due to the dimen-
sioning of the fixture body. The size of the shade ‘over-
shadows’ the fixture body, and you have to stand very
close to the wall to see it at all. In addition to making
the AJ Eklipta easy to install, this helps generate an ap-
parent weightlessness in the design perception of the
light fixture.
The dimensions of the fixture body also make it possi-
ble to utilise the back light from the mouth-blown
glass shade, imbuing AJ Eklipta with an ephemeral
lightness in spite of its size.
Moreover, AJ Eklipta is a challenge to our lighting tech-
nicians, in the contexts of both incandescent lamps
and compact fluorescent tubes. It has always been im-
perative to reduce hot spots on the surface of the glass
as far as possible.
The sharp light generated by the LED units and the lay-
out on the LED board therefore constituted a signifi-
cant challenge. To overcome this problem, our engi-
neers designed a completely new LED board, and the
result outshines all previous solutions.
They have succeeded in achieving a continuous and
softly, continuous graduated distribution across the
mouth-blown glass disc. The clear edge stands out
more distinctly now than ever before.
All LED boards for the AJ Eklipta models have been
specially designed for the respective sizes.
LIGHT TECHNOLOGY
The AJ Eklipta is designed for fitting over
wall sockets or outlets. The light is simple
to install, and the process only involves
three steps:
1. Fixture body positioned over the wall
socket or outlet. The Ø 350 and Ø 450 mod-
els can also be side-mounted.
2. LED board inserted.
3. AJ Eklipta glass diffuser fitted by tighten-
ing the three adjuster screws on the fixture
body.
The LED board is available in 3000K or
4000K versions for Ø 350 and Ø 450 while
the Ø 220 is available with a 2700K or
3000K. All are continuously dimmable. All
versions have an CRI of >80.
On account of the different sizes, the AJ
Eklipta can be installed in a variety of ways,
from tight patterns to ‘total irregular’. As
such, the fixture can be used to create an
exciting, individual light wall to enhance
both function and atmosphere. The glare-
free light ensures an attractive and pleas-
ant sense of space.
Maximised minimalism
105/100/140
Ø 8
3/17
2/21
2
Ø 2
20/3
50/4
50
AJ Eklipta LEDDesign: Arne Jacobsen
Concept: The fixture emits soft diffuse light. The glass is designed to provide a uniformly lit surface. The mouth-blown opal glass shade has a clear edge, ensuring a distinct definition of the fixture. The fixture also illuminates the mounting surface with a decorative back light.
Finish: White, powder coated. White opal glass.
Finish: Rear housing: Spun or die cast aluminium. Shade: Mouth-blown white opal glass.
Mounting: Terminal strip: Ø 220: 3x2.5mm², Ø 350 and Ø 450: 5x2.5mm². Looping: Approved, Ø 220: Max. 3x2.5mm², Ø 350mm and Ø 450: Max. 5x1.5mm². Driver positioning in ceiling/wall housing. Cable connection: Ø 350 and Ø 450: Rear or side, fitting Ø 220: Rear.
Weight: Max. 4 kg.
Class: Protection class: LED wall/ceiling: IP20. Insulation class I.
Specification notes:Ø 220 is supplied with 2700K and 3000K only.
Info notes:The fixture body on the Ø 220 model is made of die cast aluminium and there-fore functions as a heat sink. The Ø 220 is a 230V LED and therefore has no external driver.Leading edge: 100W Triac dimmer. Switch-Dim: Ø 350: 1–10V/Switch-Dim. Ø 450: Dali/Switch-Dim.
Dimension Light source Finish Shield/Diffuser Body Mounting Lighting control
Ø 220Ø 350Ø 450
9W LED 2700K9W LED 3000K 11W LED 3000K11W LED 4000K27W LED 3000K27W LED 4000K
WHT WHITE OPAL W/SIDE CABLE HOLES WALL & CEILING 1-10V1-10V/SWITCH-DIMDALIDALI/SWITCH-DIMLEADING EDGE
Product code
AJE-WC
Key features: 100% glare free • Diffuse, pleasant light distribution • Broad, uniform light distribution across the glass surface • Energy-efficient LED light source • Several colour temperatures • Long ser-vice life on light source • Minimum maintenance• Dimmable • The housing creates a visually decorative distance between the glass shade and the mounting surface • Clear glass edge forms a decorative definition of the product • Particularly well-suited for repetitive installa-tions • Long design durability • Appreciable architectural adaptability • Available in several sizes • Great flexibility in uniform lighting idiom.
Facts 220 350 450
System power: 9 11 27Lm package 4000K: 500* 700 1650Lm/W: 56 64 61CRI: >80 >80 >80SDCM: 3 3 3Dimming info: Phase dim. 1-10/DALI** 1-10/DALI***
See the website for the latest light source data.* The AJ Eklipta Ø 220 is supplied with 2700K or 3000K. The lumen package is the same for both colour temperatures. ** Switch-Dim: Ø 350: 1–10V/Switch-Dim. *** Switch-Dim: Ø 450: Dali/Switch-Dim.
www.louispoulsen.com
©Lo
uis
Poul
sen
Ligh
ting
A/
S. C
once
pt/p
rodu
ctio
n: IM
D. 2
013.
03. P
hoto
: Udo
Kow
alsk
y, P
aul K
ozlo
wsk
i, Pl
anet
, A
nder
s Su
ne B
erg,
Kas
lov
Stud
io,
Jesp
er
Ray.
Rep
ro: G
arn
graf
isk
ApS
. Prin
t: R
osen
dahl
s Bo
gtry
kker
i. Re
serv
atio
ns a
re m
ade
to p
rint
erro
rs a
nd c
hang
es o
ccas
ione
d by
tec
hnic
al d
evel
opm
ent
or o
ffic
ial r
egul
atio
ns.
Item
-no.
570
1029
479