Louver Products - · PDF filePage Header 2 Louver Selection Guide Louvers Airﬂow Aesthetics AMCA Certiﬁcations Type Model Free Area 48 x 48 in. (sq. ft.) Free Area 48 x 48 in

11

Louver ProductsSevere Duty, Stationary, Operable

January2014

Page Header

222222

Louver Selection Guide

Louvers Airflow Aesthetics AMCA Certifications

Type ModelFree Area48 x 48 in.

(sq. ft.)

Free Area48 x 48 in.

(%)

Depth(in.)

Blade Alignment

Blade Angles

(degrees)

Wind-Driven Rain

Water Penetration

Air Performance

Sound

Drainable Blade

EDD-401 8.22 51 4 H 37/45

EDD-601 8.21 54 6 H 37/45

EHM-601 7.91 49 6 H 37/45

ESD-202 6.01 38 2 H 37/45

ESD-403 8.00 50 4 H 37/45

ESD-435 8.98 56 4 H 37.5

ESD-603 8.36 52 6 H 37/45

ESD-635 9.41 59 6 H 37.5

DrainableHead

EDJ-202 6.01 38 2 H 45

EDJ-401 8.32 52 4 H 37/45

EDJ-430 8.35 45 4 H 30

EDJ-601 8.69 54 6 H 37/45

EDK-402 8.49 53 4 H 37/45

EDK-430 8.80 55 4 H 30

EDK-602 8.35 52 6 H 37/45

ESID-430

DISCHARGE7.66 48 4 H 30

ESID-430 INTAKE 10.88 68 4 H 30

Non-Drainable

ESJ-202 6.01 38 2 H 45

ESJ-401 8.44 53 4 H 37/45

ESJ-602 8.73 55 6 H 37/45

ESK-402 8.45 53 4 H 37/45

ESK-602 8.46 56 6 H 37/45

Recessed Mullion

ESJ-401RM 8.58 54 4 H 37/45

ESJ-602RM 8.38 52 6 H 37/45

ESK-402RM 8.42 53 4 H 37/45

ESK-602RM 8.13 51 6 H 37/45

Adjustable Blade

EAD-401 6.54 41 4 H 45

EAD-601 7.34 46 6 H 45

EAD-635 8.73 55 6 H 35

EADC-401 5.84 37 4 H 45

EADC-601 6.44 40 6 H 45

EAH-401 6.48 41 4 H 45

EAH-690

(45º BLADE)6.32 40 6 H 45

EAH-690

(90º BLADE)10.87 70 6 H 90

Combination Louver/Damper

EAC-401 6.34 40 4 H 45

EAC-601 7.41 46 6 H 45

EACA-601 7.68 48 6 H 45

EACC-401 5.59 35 4 H 45

EACC-601 6.20 39 6 H 45

EACN-601 7.18 45 6 H 45

ECD-401 7.60 46 4 H 37/45

ECD-601 7.32 48 6 H 37/45

GCE-202 4.96 31 2 H 45

GCE-402 6.36 40 4 H 45

GCI-202 5.26 33 2 H 45

GCI-402 6.39 40 4 H 45

Page Header

33333

Louvers Airflow Aesthetics AMCA Certifications

Type ModelFree Area48 x 48 in.

(sq. ft.)

Free Area48 x 48 in.

(%)

Depth(in.)

Blade Alignment

Blade Angles

(degrees)

Wind-Driven Rain

Water Penetration

Air Performance

Sound

Sightproof

SED-202 3.42 21 2 H NA

SED-401 5.16 32 4 H NA

SED-501 9.11 57 5 H NA

SEH-202 3.73 23 2 H NA

SEH-401 5.16 32 4 H NA

SES-202 3.75 24 2 H NA

SES-401 5.33 33 4 H NA

SEV-401 5.33 33 4 V NA

SEV-501 9.11 57 5 V NA

Wind-Driven Rain

EHH-201 6.20 39 2 H NA

EHH-401 6.72 42 4 H NA

EHH-501 6.80 43 5 H NA

EHH-601 7.58 47 6 H NA

EHH-701 6.99 43 7 H NA

EVH-201 5.71 36 2 V NA

EVH-401 6.38 40 4 V NA

EVH-602 5.88 39 6 V NA

EVH-801 5.05 32 8 V NA

Florida Product

Approved

AFJ-601X 4.89 31 6 H 45

EHH-501X 6.80 43 5 H NA

ESD-435X 8.98 56 4 H 37.5

ESD-635X 9.41 59 6 H 37.5

EVH-602X 5.88 37 6 V NA

Miami-Dade Qualified

EACA-601D 7.21 45 6 H 45

EHH-601D* 7.58 47 6 H NA

ESD-635D* 9.41 59 6 H 37/45

ESS-502D 8.19 51 5 H NA

EVH-602D* 5.88 37 6 V NA

EVH-660D 7.29 45 6 V NA

Thinline

ESF-145 6.08 38 1.5 H 45

ESJ-150 7.29 46 1.5 H 30.5

ESU-130 10.95 68 1.5 H 30

ESU-130S 10.95 68 1.375 H 30

ESU-150 7.40 46 1.5 H 52

ESU-150S 7.70 48 1.375 H 52

Acoustical

AFA-801 5.21 33 8 H 45

AFJ-120 3.67 23 12 H 45

AFJ-601 4.89 31 6 H 45

AFJ-801 4.28 27 8 H 45

AFS-120 4.27 27 12 H 45

Fabricated

FAD-402 5.98 38 4 H 45

FAD-602 7.11 45 6 H 45

FAD-635 8.77 55 6 H 35

FAJ-402 5.93 37 4 H 45

FAJ-602 6.23 39 6 H 45

FDS-402 7.03 44 4 H 45

FDS-602 8.15 51 6 H 45

FSJ-402 7.55 47 4 H 45

FSJ-602 7.57 47 6 H 45

*Optional factory installed VCD-40 control damper **Optional factory installed HCD-240 heavy duty damper

Louver Selection Guide

3

Page Header

4

Drainable Blade

Model Depth Blade Style

Blade Thickness

(in.)

Frame Thickness

(in.)

Free Area (sq. ft.)

Free Area (%)

Beginning Point of Water

Penetration (ft./min.)

Pressure Drop at Max. Intake

Velocity (in. wg)

Max. Intake Volume Flow Rate (cfm)

Exhaust Volume Flow Rate @ 0.15 in. wg (cfm)

EDD-401 4 DD 0.081 0.081 8.22 51 992 0.143 8154 8312

EDD-601 6 DD 0.081 0.081 8.21 52 1107 0.204 9088 8399

EHM-601 6 DD 0.081 0.081 7.91 49 1065 0.166 8424 6577

ESD-202 2 D 0.063 0.063 6.01 38 1058 0.141 6359 5963

ESD-403 4 D 0.081 0.081 8.00 50 1007 0.176 8056 8188

ESD-435 4 D 0.081 0.081 8.98 56 1151 0.213 10336 9285

ESD-603 6 D 0.081 0.081 8.36 52 1027 0.178 8586 8359

ESD-635 6 D 0.081 0.081 9.41 59 1077 0.173 10135 9956

* Test size: 48 x 48 in. unit @ 15 min. duration D = Drainable DD = Dual Drainable

Dual Drainable Blades

Drainable Head

Sloped Sill

EDD-401

• Drainable blades offer excellent resistance to water penetration.

• Drain gutters located on every blade to capture water.

• Integral downspouts located within the jambs to channel water downward to sloped sill for drainage away from the louver.

• EDD Series incorporates dual drainable blades for additional water capture.

• EHM Series incorporates recessed mullion design for continuous blade appearance for multiwidth sections.

• Models ESD-435 and ESD-635 lend 56% and 59% free area respectfully.

Dual Drainable Blades

Flat Head

Flat Sill

Drainable Head

Sill Pan

EHM-601

Recessed Mullion

ESD-403

Drainable

Blades

Drainable

Head

Sloped

SillESD 403SSEEEEEE ESD-635ESD-435

Drainable

Blades

Drainable

Head

Sloped

Sill

Drainable

Blades

Drainable

Head

Sloped

Sill

Page Header

5


Blade Thickness

(in.)

Frame Thickness

(in.)

Free Area (sq. ft.)

Free Area (%)




Velocity (in. wg)



EDJ-202 2 J 0.063 0.063 6.01 38 869 0.105 5223 5947

EDJ-401 4 J 0.081 0.081 8.32 52 963 0.151 8012 8325

EDJ-430 4 J 0.081 0.081 8.35 45 941 0.105 7857 7849

EDJ-601 6 J 0.081 0.081 8.69 54 998 0.166 8673 8563

EDK-402 4 K 0.081 0.081 8.49 53 934 0.145 7930 8219

EDK-430 4 K 0.081 0.081 8.80 55 1002 0.142 8818 9309

EDK-602 6 K 0.081 0.081 8.35 52 1097 0.198 9160 8426

ESID-430

(Intake)4 K 0.081 0.081 7.66 48 - 0.062 4979 -

ESID-430

(Discharge)4 DC 0.081 0.081 10.88 68 - - - 13056

* Test size: 48 x 48 in. unit @ 15 min. duration J = J Style K = K Style DC = Discharge

Drainable Head

EDJ-401

J Blades

Drainable Head

Sloped Sill

EDJ-430

Separator Plate

Drainable Head

Exhaust Blades

Sloped Sill

Intake Blades

ESID-430

Drainable Head

EDK-402

K Blades

Sloped Sill

• Drainable head member improves ability to prevent water penetration due to an additional drain gutter, designed

to capture water.

• Models EDJ-430 and EDK-430 have optional 30 degree blades designed to maximize free area.

• Model ESID-430 is an air intake/discharge louver, which helps prevent the short cycling of air.

J Blades

Drainable Head

Sloped Sill

6

AdjustableNon-Drainable


Blade Thickness

(in.)

Frame Thickness

(in.)

Free Area (sq. ft.)

Free Area (%)




Velocity (in. wg)



ESJ-202 2 J 0.063 0.063 6.01 38 668 0.062 4015 5853

ESJ-401 4 J 0.081 0.081 8.44 53 691 0.085 5832 7962

ESJ-602 6 J 0.081 0.081 8.73 55 739 0.088 6452 8401

ESK-402 4 K 0.081 0.081 8.45 53 689 0.075 5822 8216

ESK-602 6 K 0.081 0.081 8.46 56 772 0.097 6531 8322

* Test size: 48 x 48 in. unit @ 15 min. duration J = J Style K = K Style

ESJ-401 ESK-402

Non-Drainable Head

J Blades

Sloped Sill

Non-Drainable Head

K Blades

Sloped Sill

J Blade K Blade

Greenheck Offers Non-Drainable Blade Options

• Traditional stationary J or K blade styles.

• K blade has as additional offset or “rain hook” for extra protection against water penetration.

• Design incorporates hidden mullions for continuous blade appearance when multiwidth sections are needed.

7

CombinationRecessed Mullion

ESJ-401RM ESK-402RM

Non-Drainable Head

K Blades

Sloped Sill

Recessed Mullion


Blade Thickness

(in.)

Frame Thickness

(in.)

Free Area (sq. ft.)

Free Area (%)




Velocity (in. wg)



ESJ-401RM 4 J 0.081 0.081 8.58 54 658 0.074 5646 8350

ESJ-602RM 6 J 0.081 0.081 8.38 52 785 0.102 6578 8267

ESK-402RM 4 K 0.081 0.081 8.42 53 677 0.071 5700 8409

ESK-602RM 4 K 0.081 0.081 8.13 51 800 0.099 6504 8206

* Test size: 48 x 48 in. unit @ 15 min. duration J = J Style K = K Style

Non-Drainable Head

J Blades

Sloped Sill

Recessed Mullion

Typical Visible Mullion for Drainable Blade

multiwidth sections (p. 4)

Typical Hidden Mullion for Non-Drainable


Typical Recessed Mullion for RM Series and EHM


Greenheck Offers Multiple Mullion Options

• Recessed mullion designs offer better blade alignment for a true continuous blade appearance.

• Provides more structural integrity between multiwide sections.

• Easier installation with minimal field adjustments.

• Models are easier to seal in the field and thermal expansion is accounted for within the design.

8

Adjustable Blades


Blade Thickness

(in.)

Frame Thickness

(in.)

Free Area (sq. ft.)

Free Area (%)




Velocity (in. wg)



EAD-401 4 DA 0.081 0.125 6.54 41 920 0.179 6017 7074

EAD-601 6 DA 0.081 0.125 7.34 46 1007 0.140 7391 7962

EAD-635 6 DA 0.081 0.125 8.73 55 1107 0.150 9664

EADC-401 4 DA 0.081 0.125 5.84 37 920 0.179 5373 6314

EADC-601 6 DA 0.081 0.125 6.44 40 1007 0.140 6485 6986

EAH-401 4 J 0.081 0.125 6.48 41 1023 0.128 6629 5397

EAH-690

(45º Blade)6 J 0.081 0.125 6.32 40 1069 0.165 6756 5056

EAH-690

(90º Blade)6 J 0.081 0.125 10.87 70 - - - 10055

* Test size: 48 x 48 in. unit @ 15 min. duration J = J Blade DA = Drainable Adjustable

Concealed

Actuator

Location

Drainable

Head

Drainable

Adjustable

Blades

Flat Sill

EADC-401

Concealed

Blade

Linkage

Drainable Head

Adjustable Blades

EAH-401

Flat Sill

Concealed

Blade Linkage

EAH-690

Drainable Head

Adjustable Blades

Flat Sill

Concealed

Blade Linkage

• Design incorporates operable blades that can be opened or closed to protect air intake and exhaust openings in

exterior building walls.

• Louver blades are center pivoted and can be operated manually or by electric or pneumatic actuators.

• EAD and EAH Series offer concealed blade linkage.

• EADC Series offer both concealed blade linkage and a concealed electric actuator.

• Model EAH-690 provides 70% free area when blades are in full 90 degree open position.

EAD-401

Drainable

Head

Drainable

Adjustable

Blades

Flat Sill

Concealed

Blade

Linkage

EAD-635

Drainable

Head

35˚ Drainable

Adjustable

Blades

Flat Sill

Concealed

Blade

Linkage

9

AcousticalCombination Louver/Damper


Blade Thickness

(in.)

Frame Thickness

(in.)

Free Area (sq. ft.)

Free Area (%)




Velocity (in. wg)



EAC-401 4 DA 0.081 0.125 6.34 40 1192 0.170 7557 6062

EAC-601 6 DA 0.081 0.125 7.41 46 1020 0.130 7558 7146

EACA-601 6 DAF 0.081 0.125 7.68 48 1221 0.170 9377 9586

EACC-401 4 DA 0.081 0.125 5.59 35 1192 0.170 6663 5341

EACC-601 6 DA 0.081 0.125 6.20 39 1020 0.130 6324 5977

EACN-601 6 J 0.081 0.125 7.18 45 1193 0.201 8566 7593

ECD-401 4 DA 0.081 0.081 7.60 46 1018 0.176 7737 7769

ECD-601 6 DA 0.081 0.081 7.32 48 1035 0.150 7866 7700

GCE-202 2 JG 0.063 0.063 4.96 31 - - - -

GCE-402 4 JG 0.081 0.081 6.36 40 - - - -

GCI-202 2 JG 0.063 0.063 5.26 33 - - - -

GCI-402 4 JG 0.081 0.081 6.39 40 - - - -

* Test size: 48 x 48 in. unit @ 15 min. duration DA = Drainable Adjustable DAF = Drainable Airfoil JG = J Blade Gravity J = J Blade

Drainable Head

Exposed

On-Blade Linkage

Flat Sill

ECD-401

Adjustable Intake

Gravity Blades

GCI-402

Stationary Blades

Drainable Head

Sloped Sill

GCE-402

Drainable Head

Adjustable Exhaust

Gravity Blades

Stationary Blades

Sloped Sill

EACC-401

Drainable

Stationary Blades

Drainable Head

Center Pivot

Adjustable Blade

Flat Sill

Concealed Blade

Linkage

Concealed

Actuator Location

EACA-601

Drainable

Stationary Blades

Drainable Head

Center Pivot

Adjustable

Airfoil Blade

Sloped Sill

Concealed Blade

Linkage

EACN-601

Drainable Head

Center Pivot

Adjustable Blade

Concealed Blade

Linkage

Stationary Blades

Flat Sill

• Maintains a stationary appearance when adjustable blades are closed.

• ECD Series offer exposed on-blade linkage.

• EAC Series and Model EACN-601 offer concealed linkage and center

pivot operable blades.

• Model EACA-601 incorporates airfoil blades.

• EACC Series offer both concealed blade linkage and concealed

electric actuator.

• GCE and GCI Series require an exhaust or intake fan for proper

operation.

Drainable

Stationary Blades

Drainable Head

Center Pivot

Adjustable Blade

Flat Sill

Concealed Blade

Linkage

EAC-401

Page Header

10

Sightproof

Drainable

Sightproof Blades

Drainable

Sightproof Head

Flat Sill

Sightproof Blades

Drainable

Sightproof Head

Flat Sill

SEH-401

Sightproof Blades

Sightproof Head

Flat Sill

SES-401 SEV-401


Blade Thickness

(in.)

Frame Thickness

(in.)

Free Area (sq. ft.)

Free Area (%)




Velocity (in. wg)



SED-202 2 CD 0.063 0.063 3.42 21 903 0.243 3088 2168

SED-401 4 CD 0.081 0.081 5.16 32 747 0.280 3855 2589

SED-501 5 CD 0.081 0.081 9.11 57 1134 0.448 10331 7364

SEH-202 2 C 0.063 0.063 3.73 23 600 0.137 2238 2140

SEH-401 4 C 0.081 0.081 5.16 32 765 0.276 3947 2664

SES-202 2 C 0.063 0.063 3.75 24 516 0.105 1935 2118

SES-401 4 C 0.081 0.081 5.33 33 718 0.224 3827 2695

SEV-401 4 V 0.081 0.081 5.33 33 - - - -

SEV-501 5 V 0.081 0.081 9.11 57 - - - -

* Test size: 48 x 48 in. unit @ 15 min. duration C = Chevron CD = Chevron Drainable V = Vertical

Vertical Blades

Flat Head

Flat Sill

SED-401

Drainable

Sightproof Blades

Drainable

Sightproof Head

Flat Sill

SED-501

• Louvers are designed to prevent visual see-through, can be applied as air intake or discharge louvers, or can be

applied as louvered equipment screens.

• SES Series most economical of all sightproof models.

• SEH Series incorporates a drainable head member for increased protection against water penetration.

• SED Series offer both a drainable head member and drainable blades for maximum protection against water

penetration.

• Model SED-501 offers 57% free area.

• SEV Series offer a vertical sightproof blade design.

Page Header

11

Wind-Driven Rain


Blade Thickness

(in.)

Frame Thickness

(in.)

Free Area (sq. ft.)

Free Area (%)




Velocity (in. wg)


Exhaust Volume Flow Rate @ 0.15

in. wg (cfm)

EHH-201 2 RR 0.063 0.063 6.20 39 914 0.198 5667 5487

EHH-401 4 RR 0.081 0.081 6.72 42 1250 0.295 8400 5782

EHH-501 5 RR 0.081 0.081 6.80 43 1210 0.224 8500 5998

EHH-601 6 RR 0.081 0.081 7.58 47 1250 0.323 9475 6091

EHH-701 7 RR 0.081 0.081 6.99 43 1250 0.423 8962 4522

EVH-201 2 RR 0.063 0.063 5.71 36 1250 0.368 7138 5185

EVH-401 4 RR 0.081 0.081 6.38 40 1250 0.369 7975 5897

EVH-602 6 RR 0.081 0.081 5.88 39 1250 0.161 7350 8146

EVH-801 8 RR 0.081 0.081 5.05 32 1250 0.100 6313 8627

* Test size: 48 x 48 in. unit @ 15 min. duration RR = Rain-Resistant

Wind-Driven Rain Test Results Wind Velocity - 29 mph Rainfall - 3 in./hr.³

Wind Velocity - 50 mph Rainfall - 8 in./hr.³

Airflow (cfm)

Free Area Velocity

(fpm)

Core Area Velocity (fpm)1

Water Penetration

Effectiveness

Water Penetration

Classification

Water Penetration

Effectiveness

Water Penetration

Classification

EHH-2011372 298 127 99.6% A - -

0 0 0 - - 99.1% A

EHH-4019306 1807 864 99.9% A - -

4142 804 400 - - 99.0% A

EHH-5018353 1564 776 99.1% A - -

7353 1377 683 - - 99.2% A

EHH-6017276 1257 676 99.8% A - -

8211 1418 763 - - 99.2% A

EHH-7018430 1522 783 100% A - -

7222 1304 671 - - 99.5% A

EVH-2019301 2178 864 99.8% A - -

9278 2173 862 - - 99.6% A

EVH-4017248 1604 673 100% A - -

6135 1357 570 - - 99.7% B

EHH-401 EVH-401

Wind-Driven Rain Penetration Classes

Class Effectiveness

A 1 to 0.99

B 0.989 to 0.95

C 0.949 to 0.80

D Below 0.8

EHH 401HHHHEE

Horizontal Rain-

Resistant Blades

Drainable Head

**Formed Aluminum Sill Pan

EVH 401EVHH 1111

Vertical Rain-

Resistant Blades

**Formed Aluminum Sill Pan

Drainable Head

**Shipped loose formed aluminum sill pan required for models EHH-201, EHH-401, EHH-501, EHH-601, EVH-201, EVH-401.

• The most effective line of products for minimizing water penetration through openings that are sensitive to rain

penetration.

• All models incorporate a drainable head member and either vertical (EVH Series) or horizontal (EHH Series) rain-

resistant blades to provide maximum resistance to wind-driven rain, as tested by the stringent AMCA 500L test

procedure.

EVH-60210564 2224 981 99.9% A - -

10427 2195 968 - - 100% A

EVH-8018337 1654 774 99.0% A - -

9299 1845 864 - - 99.2% A1 Core area is the open area of the louver face (face area less louver frames). Core area velocity is the airflow velocity through the core

area of the louver.

Page Header

12

Florida Product Approved


Blade Thickness

(in.)

Frame Thickness

(in.)

Free Area (sq. ft.)

Free Area (%)




Velocity (in. wg)



AFJ-601X 6 J 0.080 0.080 4.89 31 799 0.065 3907 6015

EHH-501X 5 RR 0.081 0.081 6.80 43 1250 0.224 8500 5998

ESD-435X 4 D 0.081 0.081 8.98 56 1151 0.213 10336 9281

ESD-635X 6 D 0.081 0.081 9.41 59 1077 0.173 10135 9932

EVH-602X 6 RR 0.081 0.081 5.88 37 1250 0.174 7350 7873

* Test size: 48 x 48 in. unit @ 15 min. duration RR = Rain-Resistant J = J Style D = Drainable

EHH-501XFlorida Product Approved No.:

FL6876.2

Rain-Resistant Blades

Drainable Head

+Formed aluminum sill pan

ESD-435XFlorida Product Approved No.:

FL6876.3

Drainable Blades

Drainable Head

Sloped Sill

ESD-635XFlorida Product Approved No.:

FL6876.4

Drainable Blades

Drainable Head

Sloped Sill

EVH-602XFlorida Product Approved No.:

FL7494.1

Vertical Rain

Resistant Blades

Flat Sill

Formed Sill Pan

Drainable Head

AFJ-601XFlorida Product Approved No.:

FL6876.1

Formed Acoustical J Blades

with Fiberglass Insulation

Perforated Aluminum

Insulation Screen

Formed

Acoustical Head

Formed

Acoustical Sill

+Shipped loose formed aluminum sill pan required for model EHH-501X.

• All mechanically fastened Florida Product Approved models comply with TAS-202 and Uniform Static Pressure

Test (ASTM E330).

• Models also comply with TAS-201 Large Missile Impact Test (ASTM E1996) and TAS-203 Cyclic Wind Pressure

Load Test with optional welded construction.

• Approved for use in Florida’s High-Velocity Hurricane Zone if Miami-Dade Notice of Acceptance is not required.

Page Header

13

Florida Product Approved

Model Name

Max. Wind-load

AMCA

Certifications

AMCA

Listed

Miami-Dade

County, FL

NOA No.

Florida

Product

Approved No.

Protocols

Minimum Opening Maximum Section Maximum Opening

Dimensions – inches (mm)

Miami-Dade County Qualified Louvers and Penthouses

ESS-502D 110 PSF

Water, Air

AMCA 540 Enhanced Level E

09-0519.14 EXP. 8/5/14

FL12941.1

TAS 201, TAS 202, TAS 203

8 W x 7 H (203 W x 178 H)

144 W x 144 H, Limited to 72 ft 2 (3658 W x 3658 H, Limited to 6.7m2)

Unlimited W x 144 H(Unlimited W x 3658 H)

ESD-635D*

150 PSF AMCA 540 Basic Level D,


(with 0.125 blade/frame)

12-0830.07 EXP. 12/6/17

FL10088.312 W x 12 H (305 x 305)

72.563 W x 144.813 H(1843 W x 3678 H)

Unlimited W x 144.813 H(Unlimited W x 3678 H)

ESD-635D/VCD-40 150 PSF

FL10088.412 W x 15.25 H (305 W x 387 H)

36.563 W x 144.813 H(928 W x 3678 H)


EHH-601D* 150 PSF

Water, Air and Wind Driven

Rain


12-0830.08 EXP. 11/1/17

FL10088.112 W x 7 H

(305 W x 178 H)72.563 W x 144.813 H

(1843 W x 3678 H)Unlimited W x 144.813 H(Unlimited W x 3678 H)

EHH-601D/VCD-40 150 PSF

AMCA 550, AMCA 540

Enhanced Level E

FL10088.2

TAS 201, TAS 202, TAS 203, TAS 100A

12 W x 13.25 H (305 W x 337 H)

36.563 W x 144.813 H(928 W x 3678 H)


EVH-602D 150 PSF

11-1103.01 EXP. 12/7/16

FL8042.1TAS 201, TAS 202, TAS 203

12 W x 16 H (305 W x 406 H)

48.25 W x 96.25 H(1226 W x 2445 H)


EVH-602D/VCD-40 150 PSF

FL8042.2TAS 201, TAS 202, TAS 203, TAS 100A

EVH-660D 150 PSF

12-0418.06EXP. 10/4/17

FL8042,16086.1

6 W x 12 H(153 W x 305 H)

48 W x 144 H(1219 W x 3658 H)


EHH-601PD 115 PSF

Not Applicable

Not Applicable

13-0510.06 EXP. 6/19/18

FL11350.1

TAS 201, TAS 202, TAS 203

MinimumThroat W x L x Max. H

12 x 12 x 12 (305 x 305 x 305)

Maximum Throat W x L x Max. H

84 x 108 x 84 (2134 x 2743 x 2134)


84 x 108 x 84 (2134 x 2743 x 2134)

ESD-635PD 115 PSF

13-0510.05 EXP. 6/19/18

FL11350.2

MinimumThroat W x L x Max. H

12 x 12 x 12 (305 x 305 x 305)


84 x 108 x 84 (2134 x 2743 x 2134)


84 x 108 x 84 (2134 x 2743 x 2134)

Florida Product Approved Louvers

AFJ-601X Max. 200 PSF^

Water, Air and Sound


Not Applicable

FL6876.1,15718.1

Standard: TAS 202

Welded: TAS 201, TAS 202, TAS 203

12 W x 15 H(305 W x 381 H)

60 W x 96 H(1524 W x 2438 H)


ESD-435X* Max. 200 PSF^

Water, Air

AMCA 540 Basic Level D

FL6876.3,15718.3

12 W x 9 H (305 W x 229 H)

120 W x 144 H Limited to 70 ft 2

(3048 W x 3658 H Limited to 6.5m2)

Unlimited W x 144 H or 120 W x Unlimited H

(Unlimited W x 3658 Hor 3048 W x Unlimited H)

ESD-635X* Max. 200 PSF^

AMCA 540 Basic Level D,


(with 0.125 blade/frame)

FL6876.4,15718.4

12 W x 12 H (305 W x 305 H)

EHH-501X* Max. 200 PSF^

Water, Air and Wind Driven

Rain


FL6876.2,15718.2

12 W x 7 H (305 W x 178 H)

EVH-602X Max. 200 PSF^

AMCA 550, AMCA 540

Enhanced Level E

FL7494.1,15719.1

12 W x 16 H (305 W x 406 H)

60 W x 96 H(1524 W x 2438 H)


FEMA 361 Tornado Grille

FSG-801 Max. 248 PSF

Not Applicable(UL Listed)

ICC 50012 W x 12 H

(305 W x 305 H)

57 ft 2

(configuration dependent)

Unlimited W x Unlimited H(Limited to 1 section

W or H)

*Also available in architectural shapes. ^Size/section dependent.

Page Header

14


EVH-602DFlorida Product Approved No.: FL8042.1

NOA NO.: 06-0711.1

ESS-502DFlorida Product Approved No.: FL12941.1

NOA NO.: 09-0519.15

• Use within Florida’s High-Velocity Hurricane Zone when a Miami-Dade Notice of Acceptance is required.

• All models comply with Miami-Dade structural test protocols TAS-201, Large Missile Impact Test (ASTM E1996);

TAS-202, Uniform Static Pressure Test (ASTM E330) and TAS-203, Cyclic Wind Pressure Test.

• Models ESD-603D with HCD-240, EHH-601D with VCD-40 and EVH-602D with VCD-40 also comply with

Miami-Dade’s test protocol TAS 100A, Wind-Driven Rain Resistance Test.

ESD-635DFlorida Product Approved No.: FL10088.3

NOA NO.: 07-1015.06

ESD-635D with VCD-40Florida Product Approved No.: FL10088.4

NOA NO.: 07-1015.06

EHH-601DFlorida Product Approved No.: FL10088.1

NOA NO.: 08-0229.06

EHH-601D with VCD-40Florida Product Approved No.: FL10088.2

NOA NO.: 07-0925.02

Horizontal Rain-Resistant Blades

Flat Sill

Retaining Angle

Drainable Head

Horizontal Rain-Resistant Blades

Factory Installed

Control Damper

Manual Quadrant Actuator

(Electric also available)

Flat Sill

Retaining Angle

Drainable Head

Drainable Head

Drainable Blades

Sloped Sill

Retaining Angle

Drainable Blades

Factory Installed

Control Damper

Manual Quadrant

Actuator (Electric also

available)

Sloped Sill

Retaining Angle

Drainable Head

Drainable Head

Sightproof Blades

Flat Sill

Anchor Plates (typical at head and sill)

Drainable Head

Vertical Rain-Resistant

Blades

Sloped Sill

TAS 100A

Page Header

15


Blade Thickness

(in.)

Frame Thickness

(in.)

Free Area (sq. ft.)

Free Area (%)




Velocity (in. wg)



EACA-601D 6 DAF 0.081 0.125 7.68 48 1221 0.170 9377 9586

EHH-601D 6 RR 0.081 0.081 7.58 47 1250 0.323 9475 5794

ESD-635D 6 D 0.081 0.125 9.41 59 1077 0.173 10135 9932

ESS-502D 5 C 0.081 0.081 8.19 51 1036 0.218 8485 6286

EVH-602D 6 RR 0.081 0.081 5.88 37 1250 0.174 7350 7873

EVH-602D/

VCD-406 RR 0.081 0.081 5.88 37 1250 0.174 7350 7873

EVH-660D 6 RR 0.063 0.095 7.29 45 1250 0.285 9113 7160

* Test size: 48 x 48 in. unit @ 15 min. duration RR = Rain-Resistant C = Chevron D = Drainable DAF = Drainable Airfoil

Horizontal Rain-

Resistant Blades


Hinged Hood(s) Member

Optional factory provided roof curb available.

EHH-601PDFlorida Product Approved No.: FL11350.1

NOA NO.: 08-0505.06

Hinged Hood(s) Member

Drainable

Blades

Optional factory provided roof curb available.

ESD-635PDFlorida Product Approved No.: FL11350.2

NOA NO.: 08-0505.05

EVH-602D with VCD-40Florida Product Approved No.: FL10088.4

NOA NO.: 07-1015.06

TAS 100A

Factory Installed

Control Damper

Anchor Plates (typical at head and sill)

Drainable Head

Vertical Rain-Resistant

Blades

Sloped Sill

Manual Quadrant

Actuator

EVH-660DFlorida Product Approved No.: FL

NOA NO.:

TAS 100A

Vertical Rain-Resistant Blades

Flat Sill

Exterior Sill Baffle

EACA-601DFlorida Product Approved No.: PENDING

NOA NO.: PENDING

Center Pivot Adjustable

Airfoil Blade

Drainable Head

Concealed Linkage

Sloped Sill

Drainable Stationary Blade

16

Thinline


Blade Thickness

(in.)

Frame Thickness

(in.)

Free Area (sq. ft.)

Free Area (%)




Velocity (in. wg)



ESF-145 1.5 TL 0.063 0.063 6.08 38 - 0.055 3040 4925

ESJ-150 1.5 J 0.063 0.063 7.29 46 - 0.038 3645 7144

ESU-130 1.5 TL 0.063 0.063 10.9 69 - 0.055 5475 14235

ESU-130S 1.375 TL 0.063 0.063 11.41 71 - 0.030 5705 14833

ESU-150 1.5 TL 0.063 0.063 7.4 46 - 0.035 3700 9990

ESU-150S 1.375 TL 0.063 0.063 7.7 48 - 0.035 3850 10395

* Test size: 48 x 48 in. unit @ 15 min. duration TL = Thinline J = J Style

Blades

Support Strut

ESU-130S

Blades

Frame

ESF-145

ESU-150

Blades

Frame

Blades

Frame

ESJ-150

• Narrow profile products designed for interior and exterior applications.

• Framed units ideal for installation in curtain wall, window wall systems, and door applications.

• Models ESU-130S and ESU-150S are frameless and offer a total product depth of only 1.375 inches.

• Models ESU-130 and ESU-150 offer high free area and are low airflow resistance.

17

Acoustical

Free Field Noise

Reduction in Decibels

Selected 1/3 Octave Bands Center

Frequency Hz

125 250 500 1000 2000 4000 STC

AFA-801 10 8 10 14 20 15 8

AFJ-601 10 10 12 16 23 18 10

AFJ-801 11 11 13 19 28 20 12

AFJ-120 13 12 17 25 36 25 16

AFS-120 11 11 16 25 36 31 16

Sound Transmission Class (STC)The Sound Transmission Class (STC) is a rating of the effectiveness of an assembly in isolating or reducing airborne sound transmission. STC is a single number that summarizes airborne sound transmission loss data. Assemblies with higher STC ratings are more efficient at reducing sound transmission. STC is determined in accordance with ASTM E413-04.


Blade Thickness

(in.)

Frame Thickness

(in.)

Free Area (sq. ft.)

Free Area (%)




Velocity (in. wg)



AFA-801 8 AF 0.080 0.080 5.21 33 879 0.050 4580 7508

AFJ-120 12 J 0.080 0.080 3.67 23 961 0.093 3527 4543

AFJ-601 6 J 0.080 0.080 4.89 31 799 0.065 3907 6015

AFJ-801 8 J 0.080 0.080 4.28 27 887 0.079 3796 5192

AFS-120 12 C 0.080 0.080 4.27 27 830 0.118 3544 3839

* Test size: 48 x 48 in. unit @ 15 min. duration AF = Airfoil C = Chevron J = J Style SP = Sightproof

Formed Acoustical Airfoil Blades


Perforated Aluminum

Insulation Screen

Formed Head

Formed Sill

AFA-801

AFS-120

Formed Acoustical Sightproof Blades


Perforated Aluminum

Insulation Screen

Formed

Acoustical Head

Formed

Acoustical Sill

AFJ-801

Formed Acoustical J Blades


Perforated Aluminum

Insulation Screen

Formed

Acoustical Head

Formed

Acoustical Sill

• Acoustically insulated blades provide sound absorption from escaping noise.

• Available in formed aluminum or steel material.

• AFJ Series is the most economical of all acoustical models.

• Model AFA-801 offers the highest free area, has the lowest airflow resistance, and is designed with acoustical

blades.

• Model AFS-120 offers the best sound absorption performance and incorporates sightproof blades.

18


Blade Thickness

(Ga.)

Frame Thickness

(Ga.)

Free Area (sq. ft.)

Free Area (%)




Velocity (in. wg)



FAD-402 4 DA 16 16 5.98 38 1086 0.130 6494 7478

FAD-602 6 DA 16 16 7.11 45 980 0.129 6968 7768

FAD-635 6 DA 16 16 8.77 55 959 0.099 8410 11093

FAJ-402 4 A 16 16 5.93 37 691 0.062 4096 6278

FAJ-602 6 J 16 16 6.23 39 717 0.064 4467 6551

FDS-402 4 D 20 16 7.03 44 1056 0.161 8788 8444

FDS-602 6 D 20 16 8.15 51 948 0.137 7726 8661

FSJ-402 4 J 20 16 7.55 47 839 0.110 6335 6894

FSJ-602 6 J 20 16 7.57 47 896 0.125 6783 7398

* Test size: 48 x 48 in. unit @ 15 min. duration J = J Style D = Drainable A = Adjustable

Fabricated

FAJ-402FAD-402

Formed Head Member

Formed

Stationary Blades

Formed Flat Sill

Formed Adjustable

Drainable Blades

Formed Head Member

Formed Flat Sill

Formed Adjustable

J Blades

Formed

Stationary Blades

FDS-402

Formed Head Member

Formed Flat Sill

Formed Drainable

Stationary Blades

FSJ-402

Formed Head Member

Formed Flat Sill

Formed Stationary

J Blades

• Fabricated from galvanized steel and are low cost compared to extruded aluminum models.

• All fabricated models are available in stainless steel material.

• FSJ and FDS Series have stationary blades only.

• FAD and FAJ Series are adjustable blade models.

19

Special Application

PEV-400 EES-401WIH/WRH

PPPenthouses & Equipment ScreensModel PEV-400 is a gravity ventilator comprised of three sides of standard stationary non-drainable louver model ESJ-401, along with one side of 0.125-in. thick plate glass that can be broken with the pressure of a fire hose. AA fire smoke damper is located in the throat of the curb and wired into the fire control panel. The unit is shop-aassembled and shipped complete.

GGreenheck penthouse models WIH and WRH offer clean horizontal lines, mitered corners, all aluminum cconstruction, removable hoods, and weather-resistant blades. Custom louvered penthouses are also available to meet your specifications. For more information contact your local rep or visit greenheck.com

For screen applications, model EES-401 is an inverted horizontal equipment screen offering extruded aluminum “JJ” styly e blades. As alwayys,, custom configgurations are available.

FFFFFFFEEMMAA 336611 GGriilllleFEMA 361 grilles are used to protect air intake or exhaust openings from fflying debris, caused by tornadoes spawned by hurricanes or severe tthunderstorms, and must be applied over any wall penetration on a FEMA 361 storm shelter. Model FSG-801 is a FEMA 361 compliant, UL Classified(R29119) grille, and fabricated of 0.25 inch thick hot-rolled steel materials.Model FSG-801 withstands the ICC 500 2 x 4 impact standard adopted by FEMA 361 and withstands wind-loads up to 248 PSF.

Model FSG-801 may be installed in a cantilever or recessed/flush mount configuration. Mounted flanges may be located on the sides, top, and bottom. Nearly any Greenheck louver may be factory installed within the optional deep sleeve when using the flush/recessed mounting configuration, including many of our Miami-Dade Qualified and all of Florida Product ApApApAApApAA prpppp ovo eded llououveerss.

SSSSSSSSandd LLouverGGreenheck’s sand louver is designed to protect air intake and exhaust openings in building exterior walls from wind-driven sand. Design incorporates vertical ssightproof blades to separate sand from the airstream, which is then channeled oout at the sloped sill.

Model FSL-401 was tested per ASHRAE Standard Method 52.1-1992 ((previously ASHRAE standard 52-76), an independent third-party test lab using ccrushed quartz of (150-300 μm) dust medium. Standard construction material isggalvanized steel and optional formed aluminum is available. Frame depth: 4 in.

FSG-801

FSL-401

P.O. Box 410 • Schofield, WI 54476-0410 • Phone (715) 359-6171 • greenheck.com

Bird Screen or Insect Screen

Flanged Frame

Structural Reinforcing

Glazing Adapters

SillExtensions

Anchor Clips

Security Bars

Blank Off Panels

Filters & Filter Racks

We have a full line of accessories, so whether your project necessitates security bars or filter racks, we have what you need. An extensive line of standard finishes, including Kynar® paint, baked enamel paint, industrial coatings or anodize finishes are also available. In addition to our complete line of standard colors, our custom color matching capabilities are endless. These accessories and options allow Greenheck to complete your project just as you envision it.

Greenheck Fan Corporation

certifies that Models EVH-

201, 401, 602, 801; EHH-

201, 401, 501, 601, 701;

EVH-602D; EHH-601D; EHH-

501X; and EVH-602X are

licensed to bear the AMCA

Seal. The ratings shown are

based on tests and proce-

dures performed in accordance with AMCA Publication

511 and comply with the requirements of the AMCA

Certified Ratings Program. The AMCA Certified Ratings

Seal applies to water penetration, air performance and

wind-driven rain.

Greenheck Fan Corporation certifies that

Models ESD-635D, 603D; ESS-502D;

ESD-435X, 635X; ESJ-202, 401, 602;

ESK-402, 602; ESJ-401RM, 602RM;

ESK-402RM, 602RM; EDJ-202, 401,

601, 430; EDK-402, 430, 602; ESD-

202, 403, 435, 603, 635; EDD-401,

601; EHM-601; SES-202, 401; SEH-

202, 401; SED-202, 401, 501; ECD-

401, 601; EAC-401, 601; EACA-601; EACN-601; EAD-401,

601; EAH-401; FSJ-402, 602; FDS-402, 602; FAJ-402, 602;

and FAD-402, 602, 635 are licensed to bear the AMCA Seal.

The ratings shown are based on tests and procedures per-

formed in accordance with AMCA Publication 511 and comply

with the requirements of the AMCA Certified Ratings Program.

The AMCA Certified Ratings Seal applies to water penetration

and air performance.

Greenheck Fan Corporation

certifies that Models EAH-

690 with blade angle at 90º

and FSL-401 are licensed

to bear the AMCA Seal. The

ratings shown are based

on tests and procedures

performed in accordance

with AMCA Publication 511

and comply with the requirements of the AMCA

Certified Ratings Program. The AMCA Certified

Ratings Seal applies to air performance.

Greenheck Fan

Corporation certifies

that Models AFJ-120,

601, 801; AFA-801;

AFS-120; and AFJ-

601X are licensed to

bear the AMCA Seal.

The ratings shown are

based on tests and

procedures performed in accordance with

AMCA Publication 511 and comply with the

requirements of the AMCA Certified Ratings

Program. The AMCA Certified Ratings Seal

applies to water penetration, air performance

and sound ratings.

00.LVR.1000 R4 1-2014 IP Copyright © 2014 Greenheck Fan Corporation

Accessories and Options

As a result of our commitment to continuous improvement, Greenheck reserves the right to change

specifications without notice.

Specific Greenheck product warranties are located on greenheck.com within the product

area tabs and in the Library under Warranties.

Our Commitment

Prepared to SupportGreen Building Efforts

The Greenheck Fan Corporation certifies that Louver Type ESD-435X, ESD-635X, ESD-635D, AFJ-601X, EHH-501X, EVH-602X, ESS-502D, EHH-601D, EVH-602D and EVH-660D shown herein are approved to bear the AMCA Listing Label. The ratings shown are based on tests and procedures performed in accordance with AMCA Publications and comply with the requirements of the AMCA Listing Label Program

Documents

Louver Products - · PDF filePage Header 2 Louver Selection Guide Louvers Airﬂow Aesthetics AMCA Certiﬁcations Type Model Free Area 48 x 48 in. (sq. ft.) Free Area 48 x 48 in