Description

12 Series tied diaphragm regulator and 14 Series diaphragm valve mounted in a single body construction

Advantages

• Space saving - small footprint

• Reduced installation labor

• Improved start-up efficiency

• Fewer potential leak paths

• Lower overall cost

Miniature Gas Stickmaximum 125 or 150 PSIG in

Specifications

❏ Operating Parameters pressure rating per criteria of ANSI/ASME B31.3

maximum rated inlet pressure . . . . . . . . 125, 150 PSIG

design proof pressure. . 150% of maximum rated pressure

design burst pressure. . 400% of maximum rated pressure

leakage: inboard. . . . . . . . . . . . . . . <1 x 10-9 atm cc/sec He across valve seat . . . . . . <4 x 10-9 atm cc/sec He

operating temperature. . . . . . . . . . -40° F to +140° F (-40° C to +60° C)

flow capacity: standard . . . . . . . . . . . . . . . . Cv = .04 high flow . . . . . . . . . . . . . . . . Cv = .08

❏ Media Contact Materials body. . . . . 316L VAR SST with Precision Electropolish

diaphragm, regulator . . . . . . . . . . . . . . . . . Hastelloy®

diaphragm, valve. . . . . . . . . . . . . . . . . . . . . . Elgiloy®

seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PCTFE

valve stem . . . . . . . . . . . . . . . . . . . . . . . . . Hastelloy® For other materials or modifications, please consult Tescom.

❏ Internal Surface Finish . . . . . . . 10 Ra microinch (.25 micrometer)

❏ Connections. . . . . . . Welded female or male VCR®

❏ Internal Volume . . . . . . . . . . . . . . . . . . . . . . . 5 cc

❏ Weight. . . . . . . . . . . . . . . . . . . . . . . . . . 2 lbs. (.9 kg)

Elgiloy® is a registered trademark of Elgiloy Specialty Metals.Hastelloy® is a registered trademark of Haynes International, Inc.VCR® is a registered trademark of Swagelok Company.

D76

0200

X01

2

M4

M1

Pressure Conversion 14.2 PSIG = 1 kg/cm2 14.5 PSIG = 1 Bar

Micro-Stik M1 Miniature Gas Stick

All dimensions are reference & nominal Metric (millimeter) equivalents are in brackets

Part Number Selectorexample part number:

M1 - 1 0 RV [BLANK]

BASICSeRIeS VALVe LOCATION

MAX. P1

ReGuLATOR PReSSuRe

INLeT & OuTLeT PORTING OPTIONS 'A' ± .06" OPTIONS

M1 1 – Manual valve, inlet to regulator (see Fig. I)

2 – Manual valve, outlet of regulator (see Fig. II)

3 – Air operated (NC) valve, inlet to regulator (see Fig. I)

4 – Air operated (NC) valve, outlet of regulator (see Fig. II)

5 – LOTO valve, inlet to regulator (see Fig. I)

6 – LOTO valve, outlet of regulator (see Fig. II)

150 PSIG

150 PSIG

125 PSIG

125 PSIG

125 PSIG

125 PSIG

0 – 20" Hg Vac - 15 PSIG

1 – 3 - 30 PSIG

2 – 3 - 60 PSIG

3 – 3 - 100 PSIG

RM – 1/4" Male . . . . . . . . . . . . . . . . . . 3.70"

RT – 1/4" Female Swivel. . . . . . . . . . . 3.70"

Ru – IN Port:1/4" Male; OUT Port: 1/4" Female . . . . . . . . . 3.70"

RV – IN Port:1/4" Female Swivel; OUT Port: 1/4" Male . . . . . . . . . . 3.70"

[Blank] – Standard

- F – Filtered*- H – High Flow

*Filter media is nickel.Accessories & modifications may be available for this product. Please contact TESCoM for more information.

FIGURE I FIGURE II

All dimensions are reference & nominal Metric (millimeter) equivalents are in brackets

Part Number Selectorexample part number:

M4 - 1 3 RV [BLANK]

BASICSeRIeS VALVe LOCATION

MAX. P1

ReGuLATOR PReSSuRe

INLeT & OuTLeT PORTING OPTIONS 'A' ± .06" OPTIONS

M4 1 – Manual valve, inlet to regulator (see Fig. I)

2 – Manual valve, outlet of regulator (see Fig. II)

3 – Air operated (NC) valve, inlet to regulator (see Fig. I)

4 – Air operated (NC) valve, outlet of regulator (see Fig. II)

5 – LOTO valve, inlet to regulator (see Fig. I)

6 – LOTO valve, outlet of regulator (see Fig. II)

150 PSIG

150 PSIG

125 PSIG

125 PSIG

125 PSIG

125 PSIG

0 – 20" Hg Vac - 15 PSIG

1 – 3 - 30 PSIG

2 – 3 - 60 PSIG

3 – 3 - 100 PSIG

RM – 1/4" Male . . . . . . . . . . . . . . . . . . 6.00"

RT – 1/4" Female Swivel. . . . . . . . . . . 5.59"

Ru – IN Port:1/4" Male; OUT Port: 1/4" Female . . . . . . . . . 5.59"

RV – IN Port:1/4" Female Swivel; OUT Port: 1/4" Male . . . . . . . . . . 6.00"

Hu – IN Port:1/4" Male (hi flow); OUT Port: 1/4" Female (hi flow) . 6.00"

[Blank] – Standard

- F – Filtered*- H – High Flow

*Filter media is nickel.Accessories & modifications may be available for this product. Please contact TESCoM for more information.

Micro-Stik M4 Miniature Gas Stick

Flow Chart see reverse side

FIGURE I FIGURE II

©Tescom Corporation, 2007; All Rights Reserved.Tescom is a business unit of the Regulator Division. Trademarks are property of divisions of Emerson Process Management.

Form No. 1994 Rev. 9/07 Printed 9/07 3M Printed in the U.S.A.

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifications of such product at any time without notice.

Tescom High Purity controlsTel: 800-447-9650 • 763-241-3222Fax: 763-241-3209 • email: hpc@tescom.com 19111 Industrial Boulevard • Elk River, MN 55330 USA

www.Tescom.com

For information contact:

Micro-Stik Miniature Gas Stick

Flow Charts

OU

TL

ET

PR

ES

SU

RE

- P

SIG

FLOW RATE - SLPM (Nitrogen)

0

10

20

30

40

50

60

70

80

90

100

10 20 30 40 50 60 70 80 90 100 110 120

100 PSIG Inlet

80 PSIG Inlet

60 PSIG Inlet

M4M1 and M4 High Flow

OU

TL

ET

PR

ES

SU

RE

- P

SIG

FLOW RATE - SLPM (Nitrogen)

0

5

10

15

20

25

30

35

5 10 15 20 25 30

100 PSIG Inlet

60 PSIG Inlet

12 Series

60 PSIG Inlet

30 PSIG Inlet

WARNING! Do not attempt to select, install, use or maintain this product until you have read and fully understood the Tescom safety, Installation & operation Precautions.

M1 and M4 Standard