Maintenance Solutions Guide for Cat Dealers · StrenGtH HeAdLiner AdHeSiVe — A high strength aerosol product designed for bonding foam, carpet, fabric, plastic, rubber, etc. Resistant

Maintenance Solutions Guide for Cat Dealers

2012

Anti-Seize LubriCAntS 1

bonDinG & repAir proDuCtS 2Assembling sepArAte pArts

CLeAnerS, DeGreASerS & ruSt treAtMentS 4

GASketinG proDuCtS 6seAling of flAnges

kitS / SpeCiAL proDuCtS / DiSpenSinG equipMent 8

LubriCAntS 10

MetAL rebuiLDinG & WeAr prevention proDuCtS 11

priMerS 12

retAininG CoMpounDS 13securing cylindricAl Assemblies

threAD SeALAntS 14

threADLoCkerS 15

SeAM SeALinG & WinDoW GLAzinG proDuCtS 16

AppLiCAtion q&As 17

enGine AppLiCAtionS 21

ADDitionAL teCh tipS 23

GLobAL AvAiLAbiLity 31

LoCtite proDuCt DeSCription inDex 40

CAterpiLLAr proDuCt nuMber inDex 44

ContentS

1 For More inForMAtion AnD LAteSt verSion, viSit WWW.uSeLoCtite.CoM/CAterpiLLAr.

eFFeCtive 28-AuG-2012.

Anti-Seize LubricAntS•Protectagainstrust,corrosion,seizing

andgalling

•Providelubricationinextremeenvironments

Anti-Seize lubricAntS

Loctite Product cAt PArt number descriPtion temPerAture resistAnce coLor K-vALue*

Loctite c5-A coPPer Anti-Seize LubricAnt

222-3114

Protectsmetalpartsagainsthightemperatureseizingandgalling.Versatileapplicationbaseasitcanbeusedoncopper,brass,castiron,steelandalloys,includingstainlesssteel.

1800°F(982°C) Copper 0.164C-5598

4C-5599

5P-3931

Loctite GrAPHite-50 Anti-Seize

4C-5592Non-metallicanti-seizelubricantwithgoodelectricalconductivitybetweenmetal-to-metaljoints.Idealforthreadedjointsthatrequireelectricalconductivityandalsoforpressfitandslipjoints.

900°F(482°C) Black 0.134C-5593

6V-4876,186-1531

Loctite MoLY PASte, MetAL-Free —

Highmolybdenumdisulfidecontentof65%givesitunsurpassedlubricityandlowfrictionalcoefficientof0.06.Itisidealforthreadedfastenersthatrequirehighclampingforceforsametorsionalloadtocreatereliableassemblies.

750°F(400°C) Black 0.11

Loctite nicKeL Anti-Seize 337-7965

Idealforprotectionagainstseizingandgallingofslowmovingpartsunderhighpressure.Alsoeasydisassemblyofpartsexposedtocorrosiveorhotenvironments.

2400°F(1315°C) Silver 0.13

Loctite c5-A coPPer Anti-Seize SticK —

SemisolidstickoffersthesameperformancecharacteristicasC5-Apasteinconvenientsemisolidstickform.Stickoffersmoreportabilityandlessmess.

1800°F(982°C) Copper 0.16

Loctite SiLVer GrAde Anti-Seize SticK —

SemisolidstickoffersthesameperformancecharacteristicasSilverAnti-seizepasteinconvenientsemisolidstickform.Stickoffersmoreportabilityandlessmess.

1600°F(871°C) Silver 0.18

* See K-value below.

Properclamploadisanessentialpartofanyboltedassemblyfortrouble-freeoperations.Torquingeithernutorboltcreatestheclampload.Ananti-seizelubricantusedonabolthelpstodevelopgreaterclamploadforthesametorquecomparedtoanon-lubricatedbolt.Anadditionalbenefitisgreateruniformityinclamploadamongaseriesofbolts.Therelationshipbetweentorqueandclamploadisexpressedinthefollowingequation:T=KFD.

Where:t= Torque(in.-lb.,ft.-lb.,N-m) F= Clampload(lb.,N)d=Nominaldiameterofbolt(in.,ft.,m)K= Torquecoefficientornutfactor,determinedexperimentally

K Factors: Kfactorsareobtainedongrade8,½in.steelboltsandgrade5nutsbyatestprocedurethatmeasurestorquetensionproperties.Lubricantwasappliedtotheboltthreadsandbothfacesofthewasher.

Seethepropertieschart(above)forthetorquecoefficientorK-valuefortheanti-seizecompounds.

HenkelCorporationbelievesthatthisdatafairlyrepresentsexpectedperformance.However,Henkelmakesnoguaranteeofspecificperformanceonanyindividualfastener.Incriticalapplications,itisnecessarytodetermineK-valuesindependently.

Note:Therearetwo“coefficients”usedtoexpresstherelationshipbetweentorqueandtension.Torquecoefficient(alsocalled“nutfactor”)isthemostcommonlyused.Adifferentconceptisthe“frictioncoefficient,”whichhasavalueof2⁄3(or67%)ofthetorquecoefficient.

torque Guide

CLiCk on proDuCt nAMe to vieW GLobAL AvAiLAbiLity



bondinG & rePAir ProductS•Bondavarietyofsubstrates

•Assemblepartsquicklyandeasily

•Repairbrokenparts

•Bonddissimilarparts

CLiCk on proDuCt nAMe to vieW GLobAL AvAiLAbiLityinStAnt AdheSiveS

Loctite Product cAt PArt number descriPtion tyPicAL use coLor viscosity

(cP)temPerAture

rAnge Fixture sPeed

Loctite 380 bLAcK MAX inStAnt AdHeSiVe 152-9155

Rubber-toughenedinstantadhesivewithincreasedflexibilityandenhancedresistancetoshock.Bondsvarietyofsubstrateslikemetal,rubberandplasticswithexcellentpeelandshearstrength.

Close-fittingparts Black 300 -65°Fto225°F

(-54°Cto107°C) 90seconds

Loctite 401 inStAnt AdHeSiVe, SurFAce inSenSitiVe —

Designedfortheassemblyofdifficult-to-bondmaterials,whichrequireuniformstressdistributionandstrongtensionand/orshearstrength.Theproductprovidesrapidbondingofawiderangeofmaterialslikemetals,plasticsandelastomers.Alsosuitedforbondingporousmaterialssuchaswood,paper,leatherandfabric.

General-purpose Clear 110 -65°Fto180°F


Loctite 406 inStAnt AdHeSiVe —

Designedforbondingofplasticsandelastomericmaterialswhereveryfastfixturingisrequired.Quicksettingfeaturemakesitidealfortemporary‘O’ringsmaking.

Wickinggrade Clear 20 -65°Fto180°F


Loctite 410 inStAnt AdHeSiVe, touGHened —

Rubber-toughenedinstantadhesiveforhighergapfillingwithincreasedflexibilityandpeelstrengthalongwithenhancedresistancetoshock.

Gapfilling Black 3,500 -65°Fto225°F(-54°Cto107°C) 90seconds

Loctite 411 inStAnt AdHeSiVe —General-purpose,gapfillinginstantadhesivesuitableforbondingrubber,plasticandmetals.Exhibitsexcellentpeelstrengthandaddedheatresistance.

Gapfilling Clear 5,000 -65°Fto210°F(-54°Cto99°C) 30seconds

Loctite 414 inStAnt AdHeSiVe 157-7228 General-purposeinstantadhesiveforbondingplastics,rubberandmetal. Plasticbonder Clear 110 -65°Fto180°F


Loctite 426 inStAnt AdHeSiVe, bLAcK, touGHened GeL —

Designedforporoussubstratesandverticaloroverheadapplicationswithaddedbenefitsprovidedbyelastomer-modifiedinstantadhesive.Itexhibitsimpactandpeelstrengthalongwithimprovedresistancetoheatandhumidity.

Poroussurfaces Black Gel -65°Fto210°F(-54°Cto99°C) 20seconds


Designedfortheassemblyofdifficult-to-bondmaterialswhichrequireuniformstressdistributionandstrongtensionand/orshearstrength.Particularlysuitedforbondingporousandabsorbentmaterials.Exhibitsfastercurespeedondryandacidicsurfaces.

Poroussurfaces Clear Gel -65°Fto180°F(-54°Cto82°C) 15seconds

Loctite 480 inStAnt AdHeSiVe, bLAcK, touGHened —

Lowviscosity,elastomer-modifiedinstantadhesive.Bondsmetalandrubber.Excellentpeel,impactandshearstrengthwithenhancedresistancetoshock.

Generalfilling Black 200 -65°Fto180°F


Loctite 495 inStAnt AdHeSiVe — General-purposeinstantadhesiveforbondingvarietyofsubstrates.

General-purpose Clear 45 -65°Fto180°F


Loctite 496 inStAnt AdHeSiVe —General-purposeinstantadhesiveandisparticularlysuitedtobondingofmetal,rubberandplasticsubstrates

General-purpose

rubberbonderClear 125 -65°Fto180°F



General-purposeadhesivesuitableforapplicationswhereheatresistanceisrequired.Itisformulatedtoresistthermalcyclingandexhibitssuperiorresistancetohumidity.

Thermalcycling Clear 500 -65°Fto180°F(-54°Cto82°C) 50seconds

Loctite QuicKtite GeL —

Designedfortherapidbondingofawiderangeofmaterials,includingmetals,plasticsandelastomers.Particularlysuitedforbondingporousorabsorbentmaterialssuchaswood,paper,leatherandfabric.

Poroussurfaces Clear Gel -65°Fto180°F(-54°Cto82°C) 45seconds



StructurAl AdheSiveS

Loctite Product cAt PArt number descriPtion FeAtures WorK

LiFe Fixture

timecure time

sheAr strength*

(psi)

temPerAture resistAnce

Loctite FiXMASter FASt cure ePoXY MiXer cuPS 266-3144

Premeasuredepoxymixercupsareideallysuitedforapplicationsrequiringonlysmallamountofepoxy.Fillsporosityandcracks.Adherestometal,glass,woodandhardplastics.Setsin5minutes.

5minutes 10minutes 12hours 2,000 180°F

(82°C)

Loctite FiXMASter GenerAL-PurPoSe ePoXY MiXer cuPS

—

Premeasuredepoxymixercupsareideallysuitedforapplicationsrequiringonlysmallamountofepoxy.Fillsporosity,cracksandmaybeusedforrebuildingofworn-outparts.Adherestometal,glass,ceramic,mostplastics,woodandstone.Setsin5minutes.

1.5hours — 24hours 4,000

Loctite 3034 StructurAL AdHeSiVe, touGHened, PoLYoLeFin bondinG, 2-PArt AcrYLic

—

Bondswidevarietyofsubstrateslikefiberglass,thermoplastics,polycarbonates,ABC,PVC,lowandhighdensitypolyethylene.Extendedopentimeallowsadjustmentofparts.

Toughened 13minutes

75**minutes(HDPE)

72hours ≥1,160 —

Loctite 332 StructurAL AdHeSiVe SeVere enVironMent

— Activator-cured,no-mixstructuraladhesivethatprovideshightemperatureandchemicalresistance.

NoMix/SmallGap N/A 3minutes 24hours 3,000 400°F

(204°C)

Loctite H3000 StructurAL AdHeSiVe 209-0987

Lowviscosity,two-componentmethacrylateadhesivehavingexcellentbondstrengthonvarietyofsubstrateswithminimumsurfacepreparation.Itmaintainsresilientbondoverwiderangeoftemperatureswithexcellentenvironmentalresistance.

HighStrength 5minutes 15

minutes 24hours 4,150 —

bondinG & rePAir ProductSContinued


SpeciAlty AdheSiveS

Loctite Product cAt PArt number descriPtion temPerAture

rAnge Fixture/bond time FuLL cure

Loctite 330 dePend AdHeSiVe

308-3506,185-4003

One-component,highviscosityacrylicadhesiveforbondingwiderangeofmaterialsincludingwood,metal,ferrite,ceramicandplastics.

250°F(121°C) 5minutes 24hours

Loctite bLAcK contAct AdHeSiVe

5H-2471,185-4591

Solvent-basedadhesivewithneoprene.Withstandstemperaturesandresistanttogasoline,kerosene,andothersolvents.Fastdryingandwaterproof.Allowsrepositioningofpartsafterinitialcontact.

Upto180°F(82°C) Letbreathe2-3minutes;setsin5-15minutes. 24hours

Loctite contAct AdHeSiVe —

Solvent-based,general-purposecontactcementwithneoprenerubber.Usedforalltypesofweatherstripping,porousandnonporoussurfaces.Repositionableafterinitialassembly.

Upto180°F(82°C) Letbreathe2-3minutes;setsin5-15minutes. 24hours

Loctite MAXiMuM StrenGtH HeAdLiner AdHeSiVe

—

Ahighstrengthaerosolproductdesignedforbondingfoam,carpet,fabric,plastic,rubber,etc.Resistanttoextremeseasonaltemperature,iswaterresistantandspraysonclear.

Upto170°F(77°C)

Letdry15-20minutesbeforeassembly.Sprayboth

sidestobebondedformaximumstrength.

24hours

Loctite ALL-PurPoSe SPrAY AdHeSiVe 222-3113

Solvent-based,general-purposecontactcementwithneoprenerubber.Usedforalltypesofweatherstripping,porousandnonporoussurfaces.Repositionableafterinitialassembly.

Upto170°F(77°C)

Letdry15-20minutesbeforeassembly.Sprayboth

sidestobebondedformaximumstrength.

24hours

*Grit-blastedsteel.**HDPE.




cLeAnerS, deGreASerS & ruSt treAtMentS

cleAnerS

Loctite Product cAt PArt number descriPtion Function APPLicAtion

Loctite odc-Free cLeAner & deGreASer —

Non-aqueous,hydrocarbonbased,non-CFCsolventforcleaninganddegreasingofsurfacestobebondedwithLOCTITEadhesives.Removesmostgreases,oils,lubricationfluids,metalcuttingsandfinesfromallsurfaces.Itcanbeusedasasprayorinimmersioncleaningprocessesatroomtemperatureorheated.(Formerlyreferencedas7070.)

Removesgrease,oil,lubricationfluids,metalcuttingsandfilingsfromparts,equipmentandmachinery.

Useasasprayorinimmersioncleaningprocesses,atroomtemperatureorheated.Recommendedasafinalpre-assemblycleaningtreatmentforallsurfacesbondedwithadhesives.

Loctite cHiSeL PAint StriPPer, MetHYLene cHLoride

—

Removesgasketfromanytypeofassemblyin10to15minutes.Preparesmetalpartsfornewgaskets,eliminating,scrapingandsanding.Worksonwood;noncorrosiveonaluminum.

Removesprecutconventionalgasketcementsaswellasformed-in-placechemicalgaskets.

Removessilicones,baked-ongaskets,gasketsfromaluminum,smalldifficult-to-reachcomponents,weather-strippingadhesive,driedoil,grease,paintandvarnish.

Loctite cHiSeL Mc-Free PAint StriPPer —

Freefrommethylenechloride(MC).Hasfoamingactionthatliftsoffgasketsfromanyassemblyinminutes.Performsbetterthanmethylenechlorideformulationsonsiliconegasketsandremovesmostspraypaintsfromsteelpanelsinlessthan30seconds.Convenientsprayliquidpenetratesandcleanintricateshapes.

Removesprecutconventionalgasketcementsaswellasformed-in-placechemicalgaskets.

Removessilicones,baked-ongaskets,gasketsfromaluminum,smalldifficult-to-reachcomponents,weather-strippingadhesive,driedoil,grease,paintandvarnish.

Loctite nAturAL bLue biodeGrAdAbLe cLeAner & deGreASer, ALL-PurPoSe

—

Itcanbeeconomicallydilutedwithwaterindifferentrationsbaseduponcleaningrequirements.Formulatedforwipedown,pressuresprayingandimmersioncleaningprocesses.Containsnoozone-depletingchemicals.

Removesgrease,grime,oil,soot,cuttingfluids,mildew,stains,lightcarbon,animalfat,polishingcompoundsandink.

Cleansengineparts,ovens,exhausthoodsanddrillingrigs.Canbedilutedforgeneralwipe-downcleaning.Formulatedforpressuresprayingandimmersioncleaningprocesses,atroomtemperatureorheated.

Loctite non-cHLorinAted PArtS cLeAner

222-3117 Penetrates,dissolveandremovesdirtandoxidizedoil(gum)andasphaltfrommetalparts.Leavesnoresidue.Itpenetratesthroughdirtandcorrosionandflushesthemaway;eliminatestheneedfordisassembly.Idealforaluminumsurfaces.

Cleanerforremovingoil,greaseandasphaltwithnochlorinatedsolventrunoff.

All-purposemetalpartscleaner.Idealforaluminumsurfaces.

222-3118

Loctite eLectricAL contAct cLeAner, nonFLAMMAbLe

222-3124,222-3119

Removesgrease,oil,andothercontaminantsfromelectricalpartstopreventcontactfailure.Driesresidue-freeinseconds.Nonconductive,noncorrosive,nonflammable.ContainsnoCFCorclass1ozone-depletingchemicals.

Removesgrease,dirt,oil,fluxandsurfacecontaminantsfromsensitiveelectrical/electronicdevices.Alsousedforequipmentrequiringnonconductive,lowresiduedegreasingagents.ContainsHCFC-141b.Nonflammable.

Switches,relays,motorcontrols,pcboards,connectors,tapeheads,sensors,controlpanelsandelectricallydrivenequipment.

Loctite Pro StrenGtH PArtS cLeAner —

Aggressivelypenetrates,dissolvesandremovesoilandgreasefromparts.Driesquicklywithnoresidue.Containsnoozone-depletingchemicals.

Removesoil,grease,brakefluids,oxidizedoils(gum)andasphalt.Penetratesthroughdirtandcorrosionandflushesthemaway.

All-purposemetalpartscleaner.

Loctite induStriAL HAnd WiPeS —

Handcleanersthatremovetoughgreaseandgrimewhilepremiumskinconditionersandantisepticagentskeepsensitivehandsprotectedandconditioned.

Removegrease,grime,inks,soil,paint,gasketcements,epoxiesandglues.

Availableinvariousformatsinvariouscountries;wipes,smoothliquid,andliquidwithpumice.Contact your local Henkel representative for availability in your region.

Loctite HAndcLeAner WitH PuMice —

Loctite SMootH HAndcLeAner —




cleAnerS (continued)

Loctite Product cAt PArt number descriPtion dry time APPLicAtion method

Loctite 7012 —Multipurposecleanerformechanicalparts,toolsandmachines.Itcanbeusedforcleaningofallsubstrateslikemetals,rubbersandpaintedsurfaces.Cleanssoils,grease,oilandallkindofdirt.Canbeusedinspray,brushormanual.

Loctite 7013 —

Water-basedcleanerforcleaningofmechanicalpartsinsmallspraypartswashers(cleaningtable)atroomtemperature.Itcanbeusedonallmetals,syntheticmaterials,rubberandpaintedsurfaces.Providestemporarycorrosionprotectionforintermediatestorageofcleanedparts.

Loctite 7018 —Averyefficientheavydutycleanerformechanicalpartsmadeofironorlightmetalslikealuminum.Suitableforhighpressurecleaningapplications.Providesgoodfoamingpropertiesandtemporarycorrosionprotection.

turco WHite SoLVe ‘ec’ eLectricAL contAct cLeAner

— Removesgrease,oil,andothercontaminantsfromelectricalpartstopreventcontactfailure.Driesresiduefreeinseconds.

YuK-oFF brAKe And PArtS cLeAner — Thisnon-chlorinatedcleanerinstantlyremovesfluids,greaseanddirt,leavingno

contaminant-attractingresidue.

SurfAce treAtment productS

Loctite Product cAt PArt number descriPtion dry time APPLicAtion method

Loctite eXtend ruSt treAtMent — Convertsexistingrustintostablebase(rustrequired).Curedproductactsasprimer

withoil-orsolvent-basedpaints.Protectsfromfurthercorrosion.Re-coatin20minutes

Brushorcommercialsprayer

Loctite MAXi-coAt, ruSt inHibitor 222-3121 Heavydutywaxycoatingprovideslongtermcorrosionprotectionformetalparts,

equipmentandmachinery.Greatforprotectingpartsinstorage. 3to6hours Brushon

cLeAnerS, deGreASerS & ruSt treAtMentSContinued





GASKetinG ProductSSealing of flangeS

•Provideprecise,reliablesealing

•Noshimmingeffect–controlledtolerances,noneedforre-torquing

•Fillallvoids–reducetheneedfora finesurfacefinishofflanges

•Partscanbedisassembledeasilyevenafterextendedservice

•Resisthighpressurewhenfullycured

Silicone GASKetinG productS

Loctite Product cAt PArt number descriPtion coLortemPerAture

rAnge (intermittent)

seALing time

Loctite 5699 GreY HiGH PerForMAnce rtV SiLicone GASKet MAKer

— Forrigidflangeassemblies.Providesexcellentsealingandoilresistanceonflangesoftransmissionsandcastironhousings. Grey -75°Fto625°F

(-59°Cto329°C)Tack-free–30minutesFullStrength–24hours

Loctite 587 bLue HiGH PerForMAnce rtV SiLicone GASKet MAKer

141-5831Formstough,flexiblegasketsdirectlyontheflange.Offersexcellentadhesiononoilysurfaces.Lowodor,nonvolatileandnoncorrosive.Resistanttomostchemicalsandsolvents.

Blue -75°Fto500°F(-59°Cto260°C)

Tack-free–30minutesFullStrength–24hours

Loctite 598 bLAcK HiGH PerForMAnce rtV SiLicone GASKet MAKer

4C-9612 Retainshighflexibilityandoilresistanceforlongergasketlife.Lowodor,noncorrosive,lowvolatility.Resistanttomostchemicalsandsolvents. Black -75°Fto625°F

(-59°Cto329°C)Tack-free–30minutesFullStrength–24hours

Loctite 5900 FLAnGe SeALAnt

165-2601 Superiorflexibilityandadhesion.Providesexcellentsealandfluidresistance.Noncorrosive,lowodor,lowvolatility. Black -65°Fto500°F

(-54°Cto260°C) —8T-0065,186-1527

Loctite 5999 FLAnGe SeALAnt —

Intendedfordesign,service,manufactureandrebuildapplications,especiallyinautomotivepowertrainapplications.Providesinstantseal.Excellentfluidresistance.Noncorrosive,lowodor,lowvolatility.

Grey -75°Fto625°F(-59°Cto329°C)

Loctite inStAnt GASKet — Makeshighperformance,leak-proofgasketsinoneminute.Equipmentcanbereturnedtoserviceimmediately.Blow-offresistant.Outperformssolidgaskets. Black -75°Fto500°F

(-59°Cto260°C)Operatingstrength15psi–1minute

Loctite SuPerFLeX 593 rtV SiLicone SeALer, bLAcK 3S-6252,185-3986

Superiorbondingandsealingpropertiestomostsurfaces(notrecommendedforconcrete).Thisproductresistsaging,weatheringandthermalcyclingwithouthardeningorshrinking.

Black -65°Fto450°F(-54°Cto232°C)

Loctite SuPerFLeX 595 rtV SiLicone AdHeSiVe, cLeAr 119-0781

Superiorbondingandsealingpropertiestomostsurfaces.Thisproductresistsaging,weatheringandthermalcyclingwithouthardeningorshrinking.ResistancetoUVlightandozonemakesitsuitableforopenorexposedconditions.

Clear -65°Fto450°F(-54°Cto232°C)

Loctite SuPerFLeX 596 HiGH teMP rtV SiLicone AdHeSiVe, red

4C-9614 Withstandshightemperatureandhasexcellentsolventandchemicalresistance.Fillsgapsupto0.010in.(0.254mm).Maintainsclampingloadsforstrong,leakproofassemblies.Makesordressesgasketsinrigidassemblies.

Red -75°Fto600°F(-59°Cto316°C)8T-9013,205-8857

Loctite SuPerFLeX rtV SiLicone AdHeSiVe SeALAnt, bLAcK

141-5830Blackincolor,general-purposesiliconeadhesivesealant.Willnotslumpinoverheadorverticalapplications.Resistancetoextremethermalcycling,UVlightandozonemakesitsuitableforopenorexposedapplications.

Black -65°Fto450°F(-54°Cto232°C)

Loctite SuPerFLeX rtV SiLicone AdHeSiVe SeALAnt, bLue

8T-9022,185-3987Blueincolor,general-purposesiliconeadhesivesealant.Willnotslumpinoverheadorverticalapplications.Resistancetoextremethermalcycling,UVlightandozonemakesitsuitableforopenorexposedapplications.

Blue -65°Fto500°F(-54°Cto260°C)

Loctite SuPerFLeX rtV SiLicone AdHeSiVe SeALAnt, red

— Makesgasketthathavehightemperatureresistance.Resistsaging,thermalcyclingwithoutshrinkage. Red -75°Fto600°F

(-59°Cto316°C)

Loctite SuPerFLeX noncorroSiVe rtV SiLicone AdHeSiVe, cLeAr

8T-9014,205-8858General-purposeclearsiliconeadhesivesealant.Willnotslumpinoverheadorverticalapplications.Resistancetoextremethermalcycling,UVlightandozonemakesitsuitableforopenorexposedapplications.

Clear -65°Fto450°F(-54°Cto232°C)




AnAerobic GASKetinG productS


rAnge Fixture / cure time

Loctite 5127 FLeXibLe AnAerobic GASKet FLAnGe SeALAnt

4C-5300,185-3984

Flexibleanaerobicgasketingcompoundthatexhibitshighelongationproperties.Flexeswithflangemovementcausedbyvibration,pressurization,orthermalchange.

-65°Fto300°F(-54°Cto150°C)

Primed–1to24hoursUnprimed–4to24hours

Loctite 515 FLAnGe SeALAnt —

Makesflexiblegasketsforrigidmachineflangeswithlessthan0.050"(1.27mm)gap.Providesresistancetolowpressuresimmediatelyafterassemblyofflanges.Flexeswithflangemovementcausedbyvibration,pressurization,orthermalchange.

-65°Fto300°F(-54°Cto150°C)

Unprimed–1to12hoursPrimed–15minutesto2hours

Loctite HiGH FLeX ForM-in-PLAce GASKet

1U-8846,185-3983

Flexibleform-in-placegasketthatprovideshightemperatureresistanceandmoreflexibility.Fillsgapsto0.020"(0.5mm)andcurestoatoughsolventresistantgasketthatflexeswithflangemovementcausedbyvibration,pressurization,orthermalchange.

-65°Fto500°F(-54°Cto260°C) Setsin5minutes

Loctite Hi-teMPerAture FLAnGe SeALAnt

6V-6640,185-3985

Withstandshightemperatureandhasexcellentsolventandchemicalresistance.Fillsgapsupto0.010"(0.254mm).Maintainsclampingloadsforstrong,leak-proofassemblies.Makesordressesgasketsinrigidassemblies.

-65°Fto350°F(-54°Cto149°C) FullStrength–24hours

Loctite 534 Hi-tAcK GASKet dreSSinG SticK —

Tacking/dressingcompoundusedinconjunctionwithcorkandcutgaskets.Holdsgasketinplaceduringassembly.Wax-likesemisolid,convenientlypackagedinaself-feedingstickapplicator.

-65°Fto300°F(-54°Cto150°C) Setsin5minutes

Loctite 548 FLAnGe SeALAnt SticK —Sealingonrigidflanges,forexampleontransmissionsandcastmetalhousings.Itissuppliedasawax-likesemisolid,convenientlypackagedinaself-feedingstickapplicator.

-65°Fto300°F(-54°Cto150°C)

Lessthan3hourswithorwithoutaprimer

Solvent GASKetinG productS


rAnge cure time

Loctite 5923 AViAtion GASKet SeALAnt 4C-9505 Reliable,liquidgasketsealant,dressingandcoating.Thinbrushabledressingand

sealantforclose-fittingparts.Resistanttogasolineandothersolvents.-65°Fto400°F

(-54°Cto204°C) FullStrength–12hours

Loctite GASKet SeALAnt #1 4C-9501 Reliablepaste-likegasketsealant,dressingandcoating.Extendsgasketlifeandpreventsleakagewhenusedforgasketdressing.

-65°Fto400°F(-54°Cto204°C) FullStrength–12hours

Loctite GASKet SeALAnt #2 4C-9502 Reliablepaste-likegasketsealant,dressingandcoating.Setsslowlytopliablefilm.Bestfornonrigidvibratingassemblies.Increasesreliabilityofgasketseals.

-65°Fto400°F(-54°Cto204°C) Remainstacky

Loctite Hi-tAcK GASKet SeALAnt

138-8436,185-4590

Solvent-basedgasketdressingliquidthatalsoholdsgasketinplaceduringassembly.Setsquicklytoverytackyfilmandenhanceslifeofsolidgaskets.Containsnoozone-depletingcompounds.

-65°Fto500°F(-54°Cto260°C)

[aerosolto600°F/316°C]

GASKetinG ProductSContinued

tYPe oF FLAnGe SeALinG SoLutionS beneFitS

MAcHined / riGid FLAnGeS AnaerobicGasket• Allowsformetal-to-metalcontact• Eliminatesgasket“compressionset”• Fillssurfaceimperfectionsthatleadstoleaks

• Highlyresistantupto400°F(205°C)• Fillsgapsupto0.500"• Canbeusedtotackcutgaskets

StAMPed / FLeXibLe FLAnGeS SiliconeGaskets • Flexiblesealant• Resiststemperatureupto700°F(370°C)

• Fillslargegapsupto0.250"

FLAnGeS WitH cut GASKetS SolventGaskets • Tackgasketinplace• Gasketshellac

• Fastsetting





KitS / SPeciAL ProductS / diSPenSinG eQuiPMent

concrete repAir productS

Loctite Product cAt PArt number descriPtion mAximum

temPerAture

comPressive strength

(psi)WorKing time

Loctite FiXMASter MAGnA-crete —

Atwo-component,rapidsettingconcreterepairandgroutingsystem.Functionalcureinjust1hourandattainscompressivestrengthmuchhigherthanconcretewhenfullycured.Itbondstooldandnewconcreteandmostotherconstructionmaterials.

2,000 13,000 5to20minutes

lAppinG / mAchininG compoundS

Loctite Product cAt PArt number descriPtion grAde grit

Loctite cLoVer SiLicon cArbide GreASe MiX, 80 Grit 226-6624 Standardabrasivepasteforfastmetalremoval.Producesasmooth,flatsurfacebutnota

polishedone.Leavesarust-preventingfilmonlappedsurfaces. G 80

Loctite cLoVer SiLicon cArbide GreASe MiX, 240 Grit Medium-finegrittypicallyusedforcylinderlapping. B 240

Loctite cLoVer SiLicon cArbide GreASe MiX, 400 Grit Veryfinegritforfinepolishingandlapping. 2A 400

Loctite cLoVer SiLicon cArbide GreASe MiX, 800 Grit Extremelyfinegritforpolishingandhighprecisionlapping. 5A 800

diSpenSinG equipment

Loctite Product cAt PArt number descriPtion used to disPense mix

rAtios

50 ML MiX nozzLe, 6.0 MM, StePPed tiP, 10:1 rAtioS-S StYLe cArtridGe (uSed WitH 50 ML duAL cQ)

— SteppedTip,6.2"OverallLength,6.5mmID,20elements;10:1-Scartridgesonly.

Two-ComponentEpoxies,

Urethanes,Methacrylates

10:1

HAnd HeLd duAL cArtridGe diSPenSe For 50 ML (uSed WitH 50 ML duAL cQ)

— —



E-04SS

Loctite 400 ML cArtridGe MAnuAL diSPenSer — —



E-04SS

Loctite conVerter Kit, For HouSeHoLd cAuLKinG Gun, AccePtS 50 ML

—Allowtheuseofastandard300mlcaulkingtodispenseLOCTITE50ml2-partepoxycartridges.



Loctite Luer/StePPed nozzLeS For 50 ML – StructurAL AdHeSiVe (10 Per PAcK)

— —

Loctite StAtic MiXer nozzLe, Mc08-24 1:1/2:1 — — E-04SS

needLe, 18GA, ¼" SS, Grn, 50PK — —





SeAlAntS

Loctite Product cAt PArt number descriPtion

Loctite inSuLAtinG & SeALinG WrAP, bLAcK, 2" x 36'

— Non-sticky,self-fusing,multipurposewrap.Insulateelectrical,seals,leaks,improvegrip.Itcanwithstandextremeconditions,suchassaltwater,fuelandacidfluidexposureandwidetemperaturerange.

Loctite inSuLAtinG & SeALinG WrAP, bLAcK, 1" x 10'

— Non-sticky,self-fusing,multipurposewrap.Insulateelectrical,seals,leaks,improvegrip.Itcanwithstandextremeconditions,suchassaltwater,fuelandacidfluidexposureandwidetemperaturerange.

Loctite inSuLAtinG & SeALinG WrAP, red, 1" x 10' — Non-sticky,self-fusing,multipurposewrap.Insulateselectrical,sealsleaks,improvesgrip.Itcanwithstandextremeconditions,suchas

saltwater,fuelandacidfluidexposureandwidetemperaturerange.

KitS


Loctite o-rinG MAKinG Kit — Makesreplacement,highperformance'O'ringsinlessthanaminute.IteveneliminatestheneedforinventoryofdifferentsizedO-rings.JointsmadewithLOCTITE404or406areasstrongasrubberitself.

Loctite SeMiSoLid SticK eMPtY HoLSter, ProMo iteM WHiLe SuPPLieS LASt

— Holdstheself-feedingstickapplicatorproducts.

Loctite tooLboX (contAinS 220, 222, 243, 263, 248, 249, 268, 518, 545, 561, 565, 587, 660, 7649, 404, 7088, c5-A)

— Itcontains16ofthelatestandbestLOCTITEtechnologiestosolvethemostcommonmechanicalfailures.Thiskithaseverythingthataprofessionalneedstoincreasereliabilityatbase-componentlevel.

Loctite ForM-A-tHreAd StriPPed tHreAd rePAir Kit — Permanentlyrepairsstrippedthreadsandfastenersinfiveminutes(uptoSAEGrade5Englishand8.8metric).Allowsupto1,538lbs.on

torque(on1inbolt).Resistsmostshopfluids.

KitS / SPeciAL ProductS / diSPenSinG eQuiPMentContinued





LubricAntS•Protectagainstrust,corrosion,seizing

andgalling

•Providelubricationinextremeenvironments

lubricAntS

Loctite Product cAt PArt number descriPtion temPerAture resistAnce

Loctite dieLectric GreASe —Siliconedielectriccompoundpreventsleakagearoundanelectricalconnector,suchasasparkplugboot,therebyensuringastrongsparkinahighenergyignitionsystem.Translucentpaste.Anexcellentlubricantonrubber,plasticandceramicsurfaces.Corrosionresistant.

400°F(204°C)

Loctite Freeze & reLeASe —Lightmineraloil-basedpenetrantwithfreezingeffect.Shockfreezingeffectwillinstantlycoolpartsdownto-43°Candcausemicroscopiccracksinthelayerofrust,allowingthepenetratingoiltowickintotherust.

N/A

Loctite GeAr, cHAin & cAbLe LubricAnt 222-3110 Foamingactionpermitsfast,deeppenetration.Formulatedtoreduce“throwoff”fromcentrifugal

force.Repelsdirt,sandanddust.Clearcolor.DoesnotcontainCFC. 250°F(121°C)

Loctite MoLY drY FiLM LubricAnt 242-6990 Withstandshightemperaturesandhighstaticloads.Willnotattractdirtordust.Heavydutylubricant,idealforcontinuousslidingfrictionapplications. 750°F(400°C)

Loctite PenetrAtinG oiL 222-3123 Brownliquidaerosolpenetratingoil.Protectstoolsagainstrust.Drieswetmetalpartsinminutes.

Loctite SiLicone LubricAnt —Translucentsiliconegrease.Anon-curingsiliconepastethatseals,lubricates,protectsandwaterproofsmetal,rubberandplasticparts.Waterandsteamresistant.Highandlowtemperaturestability.

400°F(204°C)

Loctite SoLVo-ruSt SuPer PenetrAtinG oiL 222-3115 Clearliquidaerosolpenetratingoil.Willnotaffectpaintedsurfaces.Lowsurfacetension.Doesnot

containCFC. 250°F(121°C)

Loctite ViPerLube HiGH PerForMAnce SYntHetic GreASe — NLGIGrade2/SevereDutyGC-LB,PAObased,advancedmultipurposegrease.Excellentwherewide

rangeofoperatingtemperaturesandenvironmentsareencountered.400°F(204°C)continuous500°F(260°C)intermittent




MetAL rebuiLdinG & WeAr PreVention ProductS

metAl-filled repAir epoxieS


temPerAture

comPressive strength

(psi)

hArdness(shore d)

WorKing time

FunctionAL cure

Loctite FiXMASter FASt Set SteeL PuttY

1U-6140,207-7532

Steelreinforcedepoxy.Hardensin10minutes.Curestoametal-likefinish.Nonsagging. 200°F(93°C) 10,800 80 3minutes 10minutes

Loctite FiXMASter MetAL MAGic SteeL

8T-9018 Epoxystickthatapplieslikeaputtyandcurestoasteel-likefinish.Nomeasuringormixingtoolsrequired.Curesin10minutes.Kneadbyhandandapply.

250°F(121°C) 12,000 80 3minutes 10minutes8T-9019

Loctite FiXMASter SuPerior MetAL

1U-6136,207-7530

Anepoxyfilledwithferro-silicon,anoncorrosiveferroalloy.Resistscorrosion,abrasion,andchemicalattack.Highadhesionandcanbemachinedoncecured.

225°F(107°C) 13,500 86 25minutes 6hours

WeAr-reSiStAnt coAtinGS


temPerAture WorK LiFe FuLL cure

Loctite FiXMASter WeAr reSiStAnt PuttY

1U-6132,207-7531

Anepoxyfilledwithceramicfiberstoprovideexcellentwearandabrasionresistance.Willnotsagorshrink. 200°F(93°C) 3minutes 7hours

Loctite FiXMASter FLeX 80 PuttY 144-7779

Thickblackliquid.Flexiblecoatingthatresistsabrasion,impact,andcorrosion.Unaffectedbyoil,greaseorwater.Idealforrepairingandprotectingmetal,rubberandurethanepartsthataresubjecttoimpactabrasion.

180°F(82°C) 10minutes 8hours





PriMerS•Adhesionpromoter

•Nonflammableandnoncombustibleformulas

•Brushandwipeapplicationoptions

When ShouLD i uSe A LoCtite priMer For AnAerobiCS (threADLoCkerS, threAD SeALAntS, GASketinG AnD retAininG)?Speed up cure – Significantly speed up the cure time of Loctite threadlockers when assembling metal parts that are cold, have large gaps or deep threads.

inactive metal assemblies – When assembling metal parts with inactive surfaces, Loctite primers are recommended to ensure proper performance of Loctite threadlockers.

inACtive MetALS* (priMerS reCoMMenDeD)

ACtive MetALS (priMerS optionAL)

plated parts

Anodized Aluminum (Alodine, irridite)

titanium

Stainless Steel

Galvanized Steel

Magnetite Steel

inconel™

Silver

Gold

zinc

pure Aluminum

Cadmium

Magnesium

natural or Chemical black oxide

ironplain SteelCopperbrassbronzenickelManganeseMonel™

kovar™

Tech

SurfAce primerSLOCTITESurfacePrimersareusedwithLOCTITEInstantAdhesivestoincreaseadhesionstrengthstodifficult-to-bondsubstrates,whichincludepolyethylene,polypropylene,PTFEandthermoplasticrubbermaterials.Toobtainthehighestperformance,assembliesshouldbebondedshortlyaftersurfaceprimerbaseflashesoff.

AnAerobic primerS

Loctite Product cAt PArt number descriPtion coLor viscosity

(cP) bAse on-PArt LiFe APPLicAtion

Loctite 7088 PriMer SticK —

Apasteprimercontainedinaself-feedingstickpackage.DesignedtopromotethecurespeedofLOCTITEanaerobicproducts.Particularlyusefulinapplicationswithpassivemetalsorinertsurfacesandcoldparts.

Teal Semisolid Nosolvent 30days Anaerobics

Loctite 7090 PriMer/ActiVAtor, SoLVentLeSS — Asolventlessprimer/activatorforLOCTITEanaerobic

products.Canbesprayedorbrushedon. DarkBlue 17.5 Nosolvent 1hour Anaerobics

Loctite 7091 PriMer (For dicHroMAted SurFAceS) —

Asolventlessprimer/activatorforLOCTITEanaerobicproducts,designedparticularlyfordichromatedsurfaces.Foruseindifficult-to-bondapplicationswheregalvanizedsteelorzincelectroplatedsurfacesareinvolved.

Loctite 7649 PriMer n 169-5464,185-4004

Primer/activatorforanaerobicproducts.Solventbased.Canbesprayedorbrushedon.Speedstheanaerobiccure,increasescurethroughdepth,allowsforcuringoninertmetalsurfaces,andparticularlyusefuloncoldparts.

Clear/Green 2 Acetone 30days Anaerobics


cyAnoAcrylAte primer


(cP) bAse on-PArt LiFe dry time APPLicAtion

Loctite 770 PriMer (For cYAnoAcrYLAteS) —

PrimerforLOCTITEcyanoacrylateadhesives(instantadhesives).DesignedtomakepolyolefinandotherlowenergysurfacessuitableforbondingwithLOCTITEcyanoacrylateadhesives.

Colorless 1.25 Heptane 8hours 30seconds AllCyanoacrylates


* Please note: Loctite Anaerobic Machinery Adhesives cure in the absence of air and presence of metal ions. When assembling inactive metal parts, which are low in metal ions, the use of Loctite Primers are recommended to ensure proper performance of Loctite Anaerobic Machinery Adhesives.



retAininG coMPoundSSeCuring CylindriCal aSSemblieS

•Bondnon-threadedcylindricalmetalassemblies

•Highandmoderatestrengthproducts–cancarryhighloadsandeliminatefretting

•Fillallvoids–preventcorrosion

•Reducetheneedforclosetolerances

•100%contact–loadandstressare distributedevenlyoverthejoint

retAininG compoundS


mAx. gAP FiLL

(diAmeter)

viscosity (cP)

temPerAture rAnge cure sPeed

Loctite 232 retAininG coMPound, WHeeL Mount, HiGH LubricitY, LoW StrenGtH

—

Mediumstrengthretainingcompounddesignedwithlubricatingpropertiestofacilitateassemblywhenheavyinterferenceorhightorquevaluesareutilized.Preventsgallingandpick-upduringdisassembly.

0.004" 3600-8800 -65°Fto300°F(-54°Cto150°C)

Fixture–4-6minutesFull–72hours

Loctite 540 AdHeSiVe/SeALAnt, cuP/core PLuG —

Highstrengthsealantdesignedforsealingengineblockcupandcoreplugsandmanyotherhighstrengthsealingapplicationswherenonmigrationisrequired.

N/A 7,000-12,000

-65°Fto300°F(-54°Cto150°C) N/A

Loctite 603 retAininG coMPound — Highstrength,oiltolerant,forclose-fittingcylindricalparts. 0.005" 100-150 -65°Fto300°F

(-54°Cto150°C)Fixture–25minutes

Full–24hours

Loctite 609 retAininG coMPound, PreSS Fit, GenerAL-PurPoSe

4C-4032

Mediumstrengthforpressfittedparts 0.005" 125 -65°Fto300°F(-54°Cto150°C)

Fixture–10minutesFull–24hours7M-7456,

185-3994

Loctite 620 retAininG coMPound, SLiP Fit, HiGH teMPerAture

4C-9506Highstrength,hightemperatureresistance,forslipfittedparts 0.015" 8,500 -65°Fto450°F


Full–24hours4C-9507,185-3988

Loctite 638 retAininG coMPound, SLiP Fit, MAXiMuM StrenGtH — Highstrengthretainingcompoundforslipfittedparts. 0.015" 2,500 -65°Fto300°F


Full–24hours

Loctite 640 retAininG coMPound — Highstrength,hightemperatureretainingcompound. 0.007" 600 -65°Fto400°F(-54ºCto204ºC)

Fixture–30minutesFull–24hours

Loctite 648 retAininG coMPound, PreSS Fit, HiGH StrenGtH, rAPid cure

—Highstrength,rapidcuring,highertemperatureresistanceretainingcompoundforpressfittedcylindricalparts.

0.006" 500 -65°Fto300°F(-54°Cto150°C)


Loctite 660 retAininG coMPound, PreSS Fit 269-1943

Designedforthebondingofcylindricalparts,particularlywherebondgapscanapproach0.50mm(0.02").

0.020"250,000/1,500,000Thixotropic

-65°Fto300°F(-54°Cto150°C)


Loctite 668 retAininG coMPound SticK — Mediumstrength,hightemperatureresistancewax-like

retainingcompoundinaself-feedingstickapplicator. 0.005" Semisolid -65°Fto400°F(-54°Cto204°C)





threAd SeAlAntS

Loctite Product cAt PArt number descriPtion viscosity temPerAture

rAnge

Pressure resistAnce

(psi)

Loctite HeAd boLt & WAter JAcKet SeALAnt — Mediumstrengththreadlockerandthreadsealant,designedtoprovidelubricityduring

disassemblyoffastenersthatarethrough-holesintowaterjackets. Paste -65°Fto300°F(-53°Cto148°C) 10,000

Loctite 536 LoW breAKLooSe PiPe SeALAnt

5P-3413,185-3992

Hightemperatureresistantthreadsealantthatisdesignedtoprovidelowbreakawaytorqueevenwhenthethreadsareexposedtocontinuousheat. Paste -65°Fto300°F

(-53°Cto148°C) 10,000

Loctite 545 tHreAd SeALAnt, HYdrAuLic/PneuMAtic FittinGS

— Designedforthelockingandsealingofhydraulicandpneumaticmetalpipesandfittings.Formulatedtoofferlubricityforeasyassembly. 14,000 -65°Fto300°F

(-53°Cto148°C) 10,000

Loctite 577 tHreAd SeALAnt — Mediumstrength,coarsethreads,particularlysuitableforuseonstainlesssteelwithouttheneedforsurfaceactivation.

Loctite 592 tHreAd SeALAnt, controLLed StrenGtH — Mediumstrength,hightemperatureresistantthreadsealant. 200,000-

500,000-65°Fto400°F

(-53°Cto204°C) 10,000

Loctite 561 PiPe SeALAnt WitH PtFe SticK — General-purpose,wax-likethreadsealantinaself-feedingstickapplicator. Semisolid -65°Fto300°F

(-53°Cto148°C) 10,000

Loctite PtFe tHreAd SeALinG tAPe, ½" x 520" x 0.003"

— PTFEthreadlubricatingtape. — Upto500°F(260°C) —

tHreAd SeALAntS

threADLoCkinG, threAD SeALinG & retAininG DiSASSeMbLyLoW AnD MeDiuM StrenGth proDuCtS • Disassemblewithhandtools.

hiGh StrenGth proDuCtS• Applylocalizedheat(500°F[260°C]orhigher)toassemblyfor 5minutes.• Disassemblewithhandtoolswhilehot.

Tech




tHreAdLocKerS

threAdlocKerS


(cP)

torQuein.-Lbs.(breAK/PrevAiL)

temP. rAnge cure sPeed(steeL @ 25ºc)

Loctite 222 tHreAdLocKer, LoW StrenGtH, SMALL ScreW

— Lowstrengthpurplethreadlockerdesignedforfastenerssmallerthan1/4"indiameter. Purple

1,200/5,000

Thixotropic53/30 -65°Fto300°F

(-53°Cto148°C)

Fixture–20minutes

Full–24hours

Loctite 242 tHreAdLocKer, MediuM StrenGtH

4C-4030Mediumstrengthbluethreadlocker,idealforfasteners1/4"to3/4". Blue 1,200/5,000

Thixotropic 110/43 -65°Fto300°F(-53°Cto148°C)

Fixture–5minutesFull–24hours9S-3263,

185-3996

Loctite 243 tHreAdLocKer, MediuM StrenGtH, SurFAce inSenSitiVe

—

Mediumstrengthbluethreadlocker,primerless,hightemperatureresistanceandwillcutthroughlightoilsonfasteners.Idealforfasteners1/4"to3/4".

Blue 1,300/3,000Thixotropic 230/40 -65°Fto300°F


Full–24hours

Loctite 263 tHreAdLocKer, HiGH StrenGtH —

Highstrengththreadlocker,primerless,hightemperatureresistanceandwillcutthroughlightoilsonfasteners.Idealforfastenersupto3/4".

Red 400/600 290/290 -65°Fto360°F(-53°Cto182°C)


Loctite 271 tHreAdLocKer, HiGH StrenGtH

154-9731Highstrengthforfastenersupto1"indiameter(25mm). Red 500 250/275 -65°Fto300°F


Full–24hours155-0695,185-3998

Loctite 272 tHreAdLocKer, HiGH teMPerAture — Highstrength,hightemperaturethreadlocker.

Idealforfastenersgreaterthan7/8". Red 9,500 200/220 -65°Fto450°F(-53°Cto232°C)

Fixture–1hourFull–24hours

Loctite 277 tHreAdLocKer, LArGe HeAVY dutY boLtS — Highstrengththreadlockerforfastenersgreater

than7/8"indiameter. Red 7,000 275/275 -65°Fto300°F(-53°Cto148°C)


Loctite 290 tHreAdLocKer, HiGH StrenGtH, WicKinG GrAde

4C-9509Medium/highstrengthpenetratingthreadlocker.Designedtobeappliedtofastenersthathavealreadybeentorqued.

Green 25 90/260 -65°Fto300°F(-53°Cto148°C)


Loctite 248 tHreAdLocKer SticK, MediuM StrenGtH — Mediumstrengthbluethreadlockerinawax-like

formcontainedinaself-feedingstickapplicator. Blue Semisolid 110/43 -65°Fto300°F(-53°Cto148°C)


Loctite 268 tHreAdLocKer SticK, HiGH StrenGtH — Highstrengthredthreadlockerinawax-like

formcontainedinaself-feedingstickapplicator. Red Semisolid 220/34 -65°Fto300°F(-53°Cto148°C)


Loctite QuicKtAPe 249 —

Mediumstrengththreadlockerinatapeform.Tapeisdrytothetouchandwilllockandsealthreadswhenassembled.Canbepreappliedlongbeforeassembly.

Blue Tape 74/47 -65°Fto300°F(-53°Cto148°C)





SeAm SeAlAntS

Loctite Product cAt PArt number descriPtion sKin/WorK time

sheAr strength

(psi)

Loctite 5510 cLeAr AdHeSiVe/SeALAnt —

Anadhesive/sealantthatoffersfastskintimeandcurestoatack-freesurface.Itsoutstandingadhesionandtoughnessmakeitidealforbondingandsealingbetweendissimilarsubstratesthataresubjectedtojointmovementorimpact.

30minutesskintime 250

Loctite 5512 bLAcK AdHeSiVe/SeALAnt —

Ablackadhesive/sealantthatexhibitsveryhighstrengthandflexibility.Itdemonstrateshighadhesionwithoutaprimertoawidevarietyofsubstratesandiscompatiblewithsuitablepaintsystems.ItsUVresistanceallowsforbothinteriorandexteriorapplications.

5minutesskintime 270

Loctite HYSoL e-04SS —Anepoxyadhesivethatcurestoametallicappearance,bondswelltostainlesssteelandothermetalsurfaces,canbepainted,sandedandpowdercoated,resistscrackingandshrinkingeveninbakingprocesses.

3minutes 1,100

WindoW GlAzinG productS


teroSon teroStAt 8519 H GLASS PriMer — Anall-in-oneglassprimer/activatortopromoteadhesionofdirectglazingadhesives/sealants.Useonthemetalframe,thewindscreenandthe

remainingcutbead.

teroSon teroStAt 8517 P PriMer/ActiVAtor — Ablack,liquidprimerbasedonpolyurethane.UsedtopromoteadhesionofTEROSONTEROSTAT8597HMLCindirectglazingonglassand

glassceramics.

teroSon teroStAt 8597 PL HMLc direct GLAzinG AdHeSiVe

— Adirectglazingadhesive/sealantthatiscoldappliedandisextremelysag-resistant,hashighelasticity,hasexcellentadhesiontoglass,glasswithaceramiccoating,andtopaintedsurfaces,andalsoadherestoanyremainingglazingmaterial.

teroSon FL+Auniversalcleanercontainingnochlorinatedhydrocarbons;itisnotharmfultoautomotivepaintswhenusedonashort-termbasis.Willnotinhibitthecuringofpolyurethane-basedadhesives/sealants.Mainlyusedtocleananddegreasesubstratespriortotheapplicationofadhesivesandsealants.

SeAM SeALinG & WindoW GLAzinG ProductS





GenerAL AppLiCAtionSq: how can LoCtite brand Adhesive/Sealants improve the quality

of service repairs for my customers? A: Quality service repairs with Loctite brand products do

the following: 1. Prevent fasteners from loosening. Use Loctite243

threadlocker – Medium Strength liquid or Loctite248threadlocker Stick.

2.Sealleakythreadedfittings.UseLoctite thread Sealant. 3.Keepbearingsfromspinningout.UseLoctite609

Retaining compound. 4.Restorefitbetweenwornbearings,sleeves,gears,pulleys.

Use Loctite660RetainingCompound–PressFitRepair. 5.Sealflangedassemblies.UseLoctiteFlexibleorHigh

TemperatureFlangeSealant. Improvecustomersatisfactionwithalloftheabove!Don’t

put your cSAs at risk with inferior performing products.

q: how do these adhesive/sealants work?A: Applied as a liquid or a paste, they automatically harden into

a tough resin between metal threads or close-fitting parts. they lock and seal after assembly.

q: Can i get the parts apart?A: Yes.Usealittleextraelbowgreaseandordinarytoolson

fasteners. Use a bearing puller or a press for bearings or sleeves.Heatingat550°F(288°C)willhelploosenparts.Takeapart while hot.

q: Can i re-use the parts?A: Yes.Knockorblowoffthelooseparticlesandre-applythe

adhesive/sealant. Material can be removed by wire brush, if necessary.

q: how do i know which product to use?A: Bottlesortubesarenamedtoindicateusage.Forexample:

threadlocker indicates use on threaded fasteners.

q: how do i clean the parts?A: clean with Loctite7649PrimerN.

q: What happens if i apply adhesive sealant and it doesn’t work?

A: Fourthingsthatcouldhavehappened: 1. Sufficient material was not applied to fill the joint. 2.Insufficienttimewasallowedforcure. 3.Partswereexcessivelyoily,dirtyorgreasy,whichmay

prevent the adhesive/sealant from curing. 4.Thesurfacesrequiredaprimerbeforetheadhesive/

sealant was applied.

q: What should i do then?A: clean all parts thoroughly, using a wire wheel or a putty

knife and a solvent. When all parts are clean and dry, apply Loctite7649PrimerN.Letitdry,thenapplytheadhesive/sealant. Allow sufficient time to cure.

q: Will hydraulic oil, motor oil, fuel or water dissolve the adhesive/sealant?

A: No.Theseadhesive/sealantsaresolvent-resistanttoallordinaryliquids and gases.

q: how do i apply adhesive/sealant?A: Simplyapplyfrombottlenozzleortubetoonepart.Apply

sufficient amount to fill the gap between parts. An adhesive/sealant will not harden while in contact with air – it hardens only in the joint after assembly.

q: What happens if i leave the cap off a bottle or tube of anaerobics (threadlocking, thread sealant, gasketing, retaining)?

A: Nothing.Itwon’thardeninthetubeorbottleorevaporate.

APPLicAtion Q&AsgenerAl, gAsketing, threAdlocking & bonding



GASketinG AppLiCAtionSq: how does LoCtite high temperature Flange Sealant work?A: LoctiteHighTemperatureFlangeSealantformsthegasket

“in place.” When confined between the assembled flanges, the gel-like material automatically converts into a tough sealinggasket.Itresistsheatto350°F(177°C).Italsoresistswater,oilandsolvents.Onetubemakesmanysizesandshapes of gaskets.

q: how do i apply LoCtite high temperature Flange Sealant?A: Applydirectlyfromthenozzleapplicatoronthetube.No

mixing.Noheatcure.Formostjoints,applya1/16"(1.59mm)diameter bead around the bolt holes and between the bolt holes centered on the flanges. Material does not cure until flanges are mated together. Be sure that the material will be in contact with both flanges when parts are assembled.

q: Can i get the flanges apart?A: Yes. tap on flanges to loosen.

q: how do i clean off the cured material?A: Formostflangedjoints,itisnotnecessarytoremovethe

cured material. Wipe off surface with a clean shop towel and apply a new bead, or if it is a very critical dimension joint, remove all residue by scraping with a putty knife or with a wire wheel. then clean up with Loctite 7649PrimerNbefore reassembly.

q: Where can i use LoCtite high temperature Flange Sealant?A: Rigid flanges such as hydrostatic transmission flanges,

flywheel housings and other rigid covers or plates. Use only where the change in joint thickness will not affect internal clearances.

q: Where do i use LoCtite Flexible Anaerobic Gasket Flange Sealant?

A: It’sspecifiedforsealingflywheelhousingstotheblockonseries3114,3116and3200engines.ItisalsospecifiedondifferentialsteeringsystemsontheD-6,7,8,9and10tractors.

q: What do i use to seal track pins to track link bores which may be scratched, scored or rusted on sealed and lubricated track?

A: LoctiteHighFlexForm-In-PlaceGaskethasbeensuccessfully used in service to seal these worn parts. coat both the pin and bore, then press together.

q: Where can i use LoCtite brand rtv Silicone Gasketing/Sealants?

A: Useforapplicationswhereahighlyflexiblecompoundisneeded for bonding, sealing, weatherproofing or gasketing. typical applications are form-in-place gasketing at low pressures, caulking of sheet metal duct work, sealing of electricalboxes,insulatingandsealingofelectricalwiresandterminals,andpotting(exceptaroundelectroniccircuits).Usetoinsulateorsealmetal,glass,ceramic,painted and enameled surfaces, and most plastics and rubber, including silicone rubber. cured sealant will not accept standard paint.

q: Where do i use LoCtite 587 blue, high performance rtv Silicone Gasket Maker?

A: Use as a general-purpose silicone adhesive sealant. it is the best silicone for oil resistance, low odor, non-corrosiveness and low volatility. Suggested for salvage operation sealing on minor damaged flange surfaces at low pressures. Seals gear covers, oil pans, valve covers, transmission and Pto covers. Withstandstemperaturesto400°F(204°C)continuous.

q: What temperature will LoCtite SuperFLex red high temp rtv withstand?

A: Loctite SUPeRFLexHighTempRedRTVbonds,seals,gaskets,caulks,potsandinsulatesonapplicationsto600°F(316°C).Useonapplicationsthatrequiremaximumheatresistance.Suggestedforengines,heatexchangers,airsideof turbo chargers and aftercoolers. Also bonds insulation for hard-wrap.




GASketinG AppLiCAtionS (ContinueD)q: Where do i use LoCtite Gasket Sealants 1 and 2, and LoCtite

Aviation Gasket Sealant?A: Use to repair damaged flange surfaces that require gasket

dressing. Suggested for oil pans, transmission covers, water pumpflanges,heatervalveandsimilarflanges.Fillunevensurfaces.Withstandpressuresto5,000psi(34,450KPA)andtemperaturesto400°F(204°C).Resistleaksofgasoline,kerosene, fuel and diesel oils, engine lubricants, hot and cold water,antifreezeandwatermixtures,grease,mildacids,alkalis,and steam.

q: how do i know which LoCtite brand Gasket Sealant to use?

A: 1. LoctiteGasketSealant1–Hardeningformula(recommendedforrigidassemblies).Fillsunevensurfacesandsealsdamagedflanges.Driesquicklytohardset.

2. LoctiteGasketSealant2–Non-hardeningformula(bestsuitedfornon-rigidassemblies).Driesslowly.Setstoapliablefilm for easy disassembly. Suggested for sealing gasket T-jointsonflexibleflanges.

3. LoctiteAviationGasketSealant–Thin,brushableformula;sealsclosefitting,finelymachinedsurfaces.Driesslowlytoa pliable film. Seals most gaskets, machined surfaces and screwthreadconnectionsonengines.excellentsolventresistance.MeetsMIL-S-45180C(Ord.)TypeIII.

threADLoCkinG AppLiCAtionSq: how can i prevent “rusting in” between linkage pins

and cartridge pins and the mating bores?A: Use Loctite242orLoctite 248ThreadlockerSticktocoatthe

pin and bore prior to assembly for a rust-free barrier. Applying Loctite242orLoctite 248ThreadlockerStickeliminatestheneedforburningoutpinsonloaderlinkagearms,excavatorsticks, and booms or similar assemblies.

q: Are there any performance differences between the new LoCtite brand thread treatment Sticks (LoCtite 248 and LoCtite 268) and the traditional LoCtite brand threadlocker liquids (LoCtite 242 and LoCtite 271)?

A: No.BothofthenewLoctite brand thread treatment Sticksweredesignedtomaintaintheexactperformancecharacteristics of the liquid alternatives.

q: is a primer, like LoCtite 7649 primer n, necessary when using threadlockers?

A: if the parts are contaminated with dirt and grease, they should be cleaned with a primer in order to ensure optimal performance.Otheralternativesaretoutilizenewthreadlockingtechnology such as Loctite243Threadlocker–OilResistant.When the metals are inactive, a primer should be used.

q: Which LoCtite threadlocker product is best suited for a high shock or vibration application?

A: Loctite271Threadlocker–HighStrengthisbestsuitedforheavy equipment applications where shock or vibration are common, such as suspension bolts, motor, and pump mounts.

q: how do i disassemble parts? What is the procedure?A: Use standard hand tools for disassembly of low and medium

strengththreadlockers.Forhighstrengththreadlockers,applylocalizedheattonutorstudfor5minutesat450°F(232°C).Disassemblewhilehot.

q: What about preassembled fasteners? is there a LoCtite brand threadlocker i can use to post-apply to the assembly?

A: Yes. Loctite290Threadlocker–MediumStrengthisawickinggrade. this means that the threadlocker can be applied to preassembled fasteners and the liquid will seep into the assembly to strengthen the fastener.




bonDinG AppLiCAtionSq: on what bonding applications can i use the LoCtite

FixMASter Fast Cure epoxy?A: Use for bonding broken parts, patching holes and

resurfacingcorrodedareas(canbesandedorpaintedaftercure).Bondsmetal,glass,wood,concreteandsomeplastics. Bonds identification, name and information plates. Fillslargegaps.

q: how do i use LoCtite 330 DepenD Adhesive?A: Unlikeepoxies,Loctite330DePeND Adhesive does not

requiremixing,measuringorheating.Makesureallpartsare cleaned and dry. Spray activator, then apply adhesive topartsthataretobeassembled.Pleaseseethekitboxforcompletedirections.Handlingstrengthintwominutes.Curesto tough powerful bond. Works on all metals, wood, cork, ceramic, glass and most plastics. May eliminate drilling, tapping, riveting or welding. easy syringe application. oil resistant.Heatresistantto250°F(121°C).

q: What are some key applications for LoCtite 330 DepenD Adhesive?

A: Use to bond name plates and serial plates on equipment. Bonds control knobs that loosen under vibration. Bonds dissimilar materials such as metal, wood, plastic and concrete. Bonds porous surfaces. Bonds glass to steel. Use to bond rear view mirror brackets to windshields.

q: how do LoCtite FixMASter Fast Cure epoxy, Mixer Cups differ from the other LoCtite brand adhesive products previously described?

A: Loctite FIxMASTeRFastCureepoxy,MixerCupshavetwopartswhichmustbemixedtogether.Whenmixed,theepoxywillcureinair.Comesinaconvenientmixercupformixing.Nomess.Noguess.Nowaste.

retAininG AppLiCAtionSq: Can i use LoCtite 609 retaining Compound to fill

the clearance between a bearing and worn housing or shaft?

A: Yes.Itwillfillaclearanceupto0.005"(0.13mm).Holdingpower is equal to a press fit.

q: how do i use LoCtite 609 retaining Compound to mount bearings?

A: 1. Spray parts with Loctite7649PrimerN.Letdry 2or3minutes.

2.ApplyLoctite609RetainingCompound. 3.Assembleinnormalway. 4.Cure2hoursatroomtemperature.

q: how do i install parts with LoCtite 620 retaining Compound, high Strength?

A: 1. Spray parts with Loctite7649PrimerN.Letdry 2or3minutes.

2.SpreadpartswithLoctite620RetainingCompound–SlipFit.

3.Installgear. 4.Pressfitscanbeusedatonce.Onslipfits,allow2hours.




FueL Line SeALinG• Loctite592

thread Sealant• Loctite561PipeSealant

withPTFeStick

intAke MAniFoLD GASket• Loctite5900FlangeSealant

intAke MAniFoLD boLtS•Loctite243Threadlocker • Loctite248ThreadlockerStick

CyLinDer heAD boLtS•Loctite271Threadlocker

oiL pAn GASket• Loctite534Hi-TackGasket

DressingStickthreADeD Core pLuG• Loctite540–Cup/Core

Plug Sealant

oiL FiLter MountinG bLoCk o-rinGS•LoctiteDielectric Grease

DipStiCk SLeeve• Loctite660Retaining

compound

exhAuSt MAniFoLD StuDS• LoctiteC5-ACopper

Anti-SeizeStick

vALve Cover• Loctite5900FlangeSealant

vALve Cover GASket – Cork/CoMpoSite GASket• LoctiteHi-Tack

GasketSealant

puMp FLAnGe• LoctiteHighFlex

Form-In-PlaceGasket

hyDrAuLiC LineS• Loctite545

thread Sealant

oiL/WAter CooLinG LineS• Loctite592

thread Sealant•Loctite561PipeSealant

withPTFeStick

FLyWheeL boLtS•Loctite 268ThreadlockerStick•Loctite263Threadlocker

turbo MountinG FLAnGe• LoctiteC5-ACopper

Anti-SeizeStick

enGine APPLicAtionS



turbo FLAnGe• LoctiteHighTemp

FlangeSealant

GLoW pLuGS• LoctiteC5-ACopper

Anti-SeizeStick

DieSeL injeCtorS•Loctite243Threadlocker

oiL pAn Cover• LoctiteHighFlex

Form-In-PlaceGasket

ConneCtinG roD CAp boLtS•Loctite263Threadlocker •Loctite248ThreadlockerStick

CrAnkShAFt SLeeve SeAL• LoctiteHighFlex

Form-In-PlaceGasket

threADeD WAter puMp FittinGS• Loctite592ThreadSealant•Loctite561PipeSealant

withPTFeStick

WAter puMp MountinG hArDWAre puLLey boLtS•Loctite243Threadlocker • Loctite248ThreadlockerStick

threADeD Core pLuGS• Loctite592

thread Sealant• Loctite561PipeSealant

withPTFeStick

WAter puMp GASket• LoctiteHi-Tack

GasketSealant

CLutCh FAn boLtS• Loctite243

threadlocker

tiMinG Cover/Front Cover• LoctiteHighFlex

Form-In-PlaceGasket

hArMoniC bALAnCe boLtS•Loctite271

threadlocker

enGine APPLicAtionS



houSeD CoMponentSSeALinG/retAininG — MetALLiC SeAL

poroSity SeALinGexiStinG WeLD poroSitieS AnD CAStinGS

1. CleanthehousingI.D.andsealO.D.withpartscleaner.2. SprayboththehousingandsealwithLoctite7649PrimerN.3. ApplyabeadofLoctite243orLoctite 248ThreadlockerSticktothe

leadingedgeofmetallicsealO.D. note: VirtuallyanyLoctite threadlocking product will work here.

Medium strength liquid is recommended due to normal gap and strength requirement.

4. Installasusual.5. Wipeoffexcess.6. Allowtocure30minutes. note: •Loctite243orLoctite 248ThreadlockerStickisnormallyused

with worn seal housings to prevent leakage or slippage. •Itisnotgenerallynecessarytoremovepre-appliedsealantfrom

sealO.D.

243Bead

1. IMPORTANT!TAKePROPeRSAFeTYPReCAUTIONSIFWORKINGWITHFLAMMABLeLIQUIDTANKS.AVOIDUSeWITHCOMPReSSIBLeGASSeS.

2. Wirebrushtoremovepaint,rust,etc.fromrepairarea.3. Cleanrepairareawithpartscleaner.4. Applylocalizedheattobringrepairareatoapproximately250°F.5. Allowrepairareatocooltoapproximately185°F.6. Brushorspraysealantonrepairarea. note: •Steel–UseLoctite290Threadlockerat185°F. •Aluminum/StainlessSteel–UseLoctite290Threadlocker

at120°F. note: •Notrecommendedfor“blowholes.” •Maximumporositysealed–0.005".7. Allowtocurefor30minutes(HighPressure,above150psi-1hour).8. Cleanwithpartscleanertoremoveexcesssealant.Donotgrind.9. Paintasrequired. note: casting repair uses same procedure.

SeALinG neW WeLDS — preventive MAintenAnCe1. Remove all slag and scale while hot.2. Applysealantwhenweldis185°Fandfalling.3. Followinformationabove.

LOCTITE290

WeldPorosity

WeldBead

TankWall

AdditionAL tecH tiPS

Tech



1. Disassembleand,ifnecessary,sprayallcomponentswithLoctite7649PrimerN.Allowtodry.

2. ApplyathincoatingofLoctite thread Sealant to union face.3. ApplyabandofLoctite thread Sealant to male threads.4. Assemblepartssnugly.

SealantBand SealantBand

SealantBand SealantBand SealantBand

SealantCoating(maybeusedfornewordamagedseat)

1. clean parts of contamination. if necessary, spray Loctite7649 PrimerNontothreadedparts(maleandfemale).Allowtodry.

note: Primer is not required for brass parts.2. ApplyabandofLoctite thread Sealant to male threads starting

one to two threads from end of pipe.3. Assemblepartssnugly.Donotovertighten.4. Ifinitialpressureexceeds1000psi*,wait30minutesbeforepressurizing. note: •Forstainlesssteelcomponents,useLoctite561Pipe

Sealant Stick. •Forgeneral-purposethreadsealing,useLoctite561Pipe

Sealant Stick. •Forfinefiltrationsystemsrequiringzerocontamination,use

Loctite545ThreadSealantforhydraulic/pneumaticfittings. •Donotusewithsystemscontainingoxygenorstrong

oxidizers(chlorine).

* depending on conditions

pipe unionS

threAD SeALinGStAnDArD FittinGS – pipeS, hyDrAuLiC, or Air

threAD SeALinGCoMpreSSion FittinGS

1. Slidefittingnutandferrulebackapproximately¾"fromendoftubing.2. Ifnecessary,spraytheentireassemblywithLoctite7649PrimerN.

Allow to dry. note: Primer is not required for brass parts.3. ApplyathincoatingofLoctite thread Sealant to tubing where

ferrule will be located.4. SlideferruleforwardoverLoctite thread Sealant coated tubing, then

apply a thin bead of Loctite thread Sealant coating to ferrule.5. SlideferruleforwardoverLoctite thread Sealant coated tubing.6. ApplyasmallbandofLoctite thread Sealant to male threads.7. Assemble and tighten normally. note: Donotuseonplasticfittingsortubing.

FLAreD/SWAGeD FittinGS

1. Disassembleand,ifnecessary,sprayallcomponentswithLoctite7649PrimerN.Allowtodry.

2. ApplyathincoatingofLoctite thread Sealant to fitting face.3. ApplyabandofLoctite thread Sealant to male threads.4. Assemblepartssnugly.

SealantBandSealantCoating SealantBand

SealantBand

SealantCoating(fornewordamagedflareorseat)


Tech



609

Shaft

Housing609

threAD SeALinGhoSe enDS – Air & hyDrAuLiC

1. if necessary, spray adapter threads with Loctite7649PrimerN. Allow to dry.

2. InsertbarbedhosestemintohoseI.D.withslighttwistingmotion.3. Installappropriatehoseclamp.4. ApplyabandofLoctite thread Sealant to male hose stem threads

upon installation or adding accessory device. tighten snugly. note: Loctite thread Sealant may attack synthetic rubber tubing.

SealantBand PRESS FIT

ShAFt MounteD ASSeMbLieSpreSS Fit

StAnDArD1. CleanshaftO.D.andcomponentI.D.2. ApplyabeadofLoctite609RetainingCompoundto

circumference of shaft at leading edge of insertion or leading area of engagement.

note: •Retainingcompoundwillalwaysbesqueezedtotheoutsidewhen applied to shaft.

•DONOTusewithLoctiteAnti-Seizesorsimilarproduct.3. Pressasusual.Wipeoffexcess.4. Nocuretimerequired. note: Loctite609RetainingCompoundisusedduetolow

viscosity and wetting properties.

tAnDeM Mount1. Apply retaining compound to bore of inside component.2. Continueassemblyasabove.

Bearing

Shaft

609

houSeD CoMponentSSLip Fit

oriGinAL1. Select component to fit shaft.2. MachinetoreducecomponentO.D.orincreasehousingI.D.topermit

approximate0.002"-0.004"diametralslipfit.3. CleanallpartsandspraywithLoctite7649PrimerN.4. ApplyLoctite609RetainingCompoundtocomponentO.D.5. Installcomponent.Donotrotate.6. Wipeoffexcess.7. Allow5minutespriortoservice.

WornProceduresidenticaltooriginalslipfit,except:1. Determinethemaximumradialgap.2. Ifthemaximumgapexceeds0.005",Loctite7649PrimerNmust

be used.3. Takestepstomaintainconcentricityonlargegaps.4. Largegapsrequirelongercuretimes(30-60minutes).5. Loctite660RetainingCompoundisNOTrecommendedforradialgaps

exceeding0.010".6. SeeprocedureforBADLYWORNHOUSING,page28.


Tech



GASket DreSSinGSeALeD FLAnGeS

1. Remove old gasketing material and other heavy contaminants with Loctite CHISeL Paint Stripper. Use mechanical removal technique if required.

note: Avoid grinding.2. Cleanbothflangeswithpartscleaner.3. SprayLoctite7649PrimerNonbothflangefacesandbothsidesofthe

precutgasket.Allow1-2minutestodry.4. SmearLoctiteFlangeSealanttobothsidesofprecutgasketwitha

clean applicator. 5. Placecoatedgasketonflangesurfaceandassemblepartsimmediately. note: •Ifcoverboltsintoblindholes(asabove),applyLoctite243

threadlocker into hole and on threads. tighten normally. •Ifitisathruholeboltassembly,applyLoctite243or

Loctite 248ThreadlockerSticktoboltthreads.6. Tightennormally.

243

PrimerNOnly243

243PrimerNand518(534Stick)

StrenGthen keyeD ASSeMbLieSStAnDArD Duty

ASSeMbLy1. clean all parts.2. Ifnecessary,sprayallparts(I.D.andO.D.)withLoctite7649PrimerN.3. ApplyLoctite660RetainingCompoundcoatinginto

keyway and on key.4. Applydab(s)ofLoctite660RetainingCompoundontoshaftopposite

keyway or evenly spaced around shaft.5. Assembleparts.Wipeoffexcess.6. ApplyadabofLoctite660RetainingCompoundtosetscrew.7. tighten set screw.8. Allow5-10minutespriortoservice. note: • Loctite660RetainingCompoundisNOTrecommendedfor

radialgapsexceeding0.010"onshaftorkeyway.

DiSASSeMbLy1. tap component and key with hammer.2. Pullasusual.

660coatinghere

Dab660or243here

Dab660here

ForM-in-pLACe SiLiConeSStAMpeD or Sheet MetAL FLAnGeS

1. Remove old gasketing material and other heavy contaminants with Loctite CHISeL Paint Stripper.

2. Cleanbothflangeswithpartscleaner.3. ApplyacontinuousbeadofLoctitehighperformancesilicones(587

Blue)tosealingsurface.Circleallboltholes. note: •Useproperbeaddiametertosealflangewidthanddepth. •Minimizeexcessivematerial“squeeze-out.”4. Assemblewithin10minutesbypressingtogether.Tightenasrequired.5. Cleanupanyexcessorsqueeze-out.6. Curetimeswillvarywithtemperature,humidity,andgap.Typicalfull

curetimeis24hours.


Tech



ForM-in-pLACe GASketinGSeALinG CASt riGiD FLAnGeS

1. Remove old gasketing material and other heavy contaminants with Loctite CHISeL Paint Stripper. Use mechanical removal technique if required.

note: Avoid grinding.2. Cleanbothflangeswithpartscleaner.3. SprayLoctite7649PrimerNononlyonesurface.Allow1-2minutes

to dry.4. ApplyacontinuousbeadofLoctiteFlangeSealanttotheothersurface. note: circle all bolt holes with sealant, if appropriate.5. Mateparts.Assembleandtightenasrequired. note: Immediateassemblynotrequired;however,avoiddelays

over45minutes.6. Allowtocure:

a. Nopressure–immediateservice b. Lowpressure(upto500psi)–30to45minutes c. Highpressure(500to2500psi)–4hours d. extremehighpressure(2500to5000psi)–24hours

LoCtite brAnD GASketinG quiCk SeLeCtor

ContinuousBead

CircleBoltHoles

FlatFlange RaisedFlange

use Product Gap Fill temp. range

General 518 Flange Sealant 0.050" -65°Fto300°F(-54°Cto150°C)

General 515 Flange Sealant 0.050" -65°Fto300°F(-54°Cto150°C)

General/Overhead 548 Flange Sealant Stick 0.010" -65°Fto300°F(-54°Cto150°C)

ruStprooFinGLoCtite extenD ruSt treAtMent

SurFACe prepArAtion — oLD SteeL:Looseor“flaky”rustmustberemoved.Onlyconversionoffirmlybondedrust will result in durable protection. oil, grease, old paint, mill scale, form oil, fingerprints, water soluble surfaces and chlorides must be removed to allow Loctite exTeND Rust treatment to react with rust. ideal surfaces will show light rust as well as bare metal surfaces.

ruSt ConverSion tiMe AnD AppeArAnCe:two coats of Loctite exTeND Rust treatment are recommended.

the first coat should develop a purple-black color within seconds. the second coat should dry to a black color. the second coat should be applied within15-30minutesofthefirstcoat.

AppLiCAtion ConDitionS:Loctite exTeND Rust treatment may be applied when surface and air arebetween50°Fand90°F(10°Cand32°C).Reactionissloweratlowertemperatures. if temperature is too hot, film may surface dry and bubble. Highhumidityisbeneficial;itslowsdryingbutassistsrustconversion.Loctite exTeND Rust treatment should not be applied in conditions of condensinghumidity(e.g.,fog,dew),onice,inrainorinheavysea(salt)sprayatmospheres.Steelsurfacemaybedampbutnotwet(i.e.,continuousvisiblefilmofwater).DONOTAPPLYLoctiteexTeNDRUSTTReATMeNT TOSURFACeSINDIReCTSUNLIGHT.

AppLiCAtion equipMent MethoDS:Loctite exTeND Rust treatment may be applied by brush, roller, or spray. Brush or roller is suitable for small areas. Avoid sags and ridges and keep edges wet by coating about a square yard at a time. Roll away from previouslycoatedareaandthenrollback.Donot pour unused material back into the original container.NeVeRaddsolventstoLoctite exTeND Rust treatment.

Spray application is recommended for larger areas. Airless spray equipment is faster, and provides more effective conversion due to improved surface penetration. conventional air-spray equipment may be used, but Loctite exTeND Rust treatment may require thinning upto10%withwaterforproperspraying.


Tech



houSeD CoMponentSCoMponent CenterinG

exCeSSive/even WeAr1. Position the component in bore.2. Selectthreeequilateralmountingpoints.3. Determinetheradialgapatthosepoints.4. Selectappropriateshimstock.5. Cutthreepiecesapproximately1⁄8"widetofitboredepth.6. BondtheshimstoboreatmountingpointsusingLoctite480

instant Adhesive.7. Assembleperinstructionsonpage25.

exCeSSive/uneven WeAr1. Position the component in bore.2. Selectthreeequilateralmountingpoints.3. Determinetheradialgapatthosepoints.4. Selectandcutappropriateshimstockforeachpoint.5. BondtheshimstoboreatmountingpointsusingLoctite380Prism

instant Adhesive.6. Assembleperinstructionsabove.

Shims

Shim

Shims

Shim

StAnDArD threAD repAir1. FollowinstructionsonLoctiteFORM-A-THReADpackage.2. Ifcoverplateisusedforboltalignment: (a)Applyreleaseagenttomatingfacesaroundrepairarea. (b)Use“waxed”paperorsimilarfilmbetweenfaces.3. A“jiggling/twisting”motionwheninitiallyinsertingboltimproves

thread conformation. note: NOTintendedforenginestudrepair.

SMALL hoLe/Fine threAD repAiroption 1 Drilloutdamagedholetooversize,thenfollowSTANDARD

THReADRePAIR.option 2 Apply LoctiteFORM-A-THReADtoscrewandinsertinto

damaged hole. clamp in place while product cures.

StuD inStALLAtion — perMAnent (LiGht Duty)1. Use stud or cut “all thread” to desired length.2. DoNOTapplyreleaseagenttostud.3. Proceedaswithstandardthreadrepair.4. Allow30minutestocure.5. Assembleasrequired.

ReleaseAgent

StrippedThreads

Tape Tape

Step 1

FORM-A-THREAD

½FillOnly

ReleaseAgent

Step 2

FORM-A-THREAD

CleanedBolt

Step 3

Threadlocker

NewThreads

CoverPlate

threAD repAirStrippeD threAD repAir


Tech



bonDinGintroDuCtion to bonDinG ADheSiveSWithin the broad range of Loctite brand adhesives you will always findthesolutiontoyourbondingchallenge.Itis,however,extremely important to have at least basic knowledge of adhesive methodology in order to successfully bond two substrates together. the three major causes of bonding failures are attributed to:

• Poorevaluationofthebondingassembly

• Inadequatesubstratepreparation

• Improperadhesiveselection

bonDinG ASSeMbLyBonding assembly has a direct impact in the adhesive performance. choose acombinationoftypesofjointsorjointstressdistributionthatmaximizesbonding strength. Below are different types of joints and stress distribution:

typeS oF jointS

typeS oF joint StreSS DiStribution

joint WiDth vS. overLApAwiderbondline(Width)willbestrongerthanalengthierone(Overlap):

BUTTFAIR

OVERLAPGOOD

SINGLE STRAP BETTER

DOUBLE STRAP BEST

SHEARBETTER

COMPRESSIVEBEST

CLEAVAGE/PEELFAIR

TENSILEGOOD

OVERLAPWIDTH

bonDinGSurFACe prepArAtionAbrasive Methods

Rubbing or striking a surface with hard, coarse material. Abrasiveexamples:

• Sanding:Rubbingwithabrasivepaperorcloth(forsmallarea/superficialwear-down)

• Blasting:Strikingwithsteelgrit,sand,orotherabrasivematerial(forlargeareas/deepwear-down)

Chemical Methods

cleaning process that uses solvents to dissolve contaminants. Chemicalexamples:

• SolventDip:Immersinginsolvent

• SolventWipe:Rubbingwithsolvent-soakedwipe

• VaporDegreasing:Solventinvaporform

• UltrasonicCleaning:Solventdipmethodwithhigh-frequencysound waves that vibrate the dirt away

o-rinG MAkinG

1. Cutthestartingendofthecordstockwithacleanrazorblade.ensurethecutiscleanandsquare.Donottouchthecleancutend.

2. Measurecordstocktoappropriatelength.Forprecisemeasurement, use Loctite o-Ring tool or the ruler provided in the Loctite o-Ring MakingKit.

3. Cutthemeasuredendofthecordstockwithacleanrazorblade. ensurethecutiscleanandsquaretooptimizebondarea.

4. ApplyonedropofLoctite404QUICKSeT instant Adhesive and mate the two ends of the cord stock.


Tech



troubLeShootinGCheCkLiSt1. Whattypeoffailureisoccurring?Hastheapplicationworkedbefore?

2. Wasproperandadequateadhesive/sealantused?

3. Wasproperandadequateprimer/activatorused?

4. Doserviceconditionsexceedthecapabilityoftheadhesivesealant? (a)operatingtemperature (c)fluidcompatibility (b)excessivepressuretoosoon (d)impactonenvironment

5. Werepartsadequatelycleanedpriortoapplyingadhesive? note: if adhesive failure, is cured residue on one or both parts?

if one part is bare, check that part for contamination.

6. Wereproperassemblytechniquesutilized?

7. Was adhesive/sealant allowed adequate cure time prior to service?

8. Doassembly/partconditionsexceedcapabilityoftheadhesive/sealant? (a)excessivegaps (c)improperjointdesign (b)componentmaterials (d)inadequateclamping/fixturing

9. Ifadditionalassistanceisrequired,pleasecallourHeNKeLTeCHNICALINFORMATIONLINe.SeebackcoverfortheHenkelTechnicalinformation number in your area.

LiMitAtion oF WArrAntythe data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtainedbyothersoverwhosemethodswehavenocontrol.Itistheuser’sresponsibilitytodeterminesuitabilityfortheuser’spurposeofany production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazardsthatmaybeinvolvedinthehandlingandusethereof.

Inlightoftheforegoing,HeNKeLCORPORATIONSPeCIFICALLYDISCLAIMSALLWARRANTIeSOFMeRCHANTABILITYORFITNeSSFORAPARTICULAR PURPOSeARISINGFROMSALeORUSeOFHeNKeLCORPORATION’SPRODUCTS.HeNKeLCORPORATIONSPeCIFICALLYDISCLAIMSANYLIABILITYFORCONSeQUeNTIALORINCIDeNTALDAMAGeSOFANYKIND,INCLUDINGLOSTPROFITS.Thediscussionhereinofvariousprocessesor compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a license under anyHenkelCorporationpatentswhichmaycoversuchprocessesorcompositions. We recommend that each prospective user test the proposed application to determine its suitability for the purposes intended prior to incorporating any product or application in its manufacturing process using this data as a guide. Some products may be covered by one or more United States or foreign patents or patent applications.


Tech



� Available � LimitedAvailabilitywithinaRegion.ContactyourlocalHenkelRepresentativeformoreinformation.

6 NotAvailable

Anti-Seize lubricAntSLoctite Product cAt PArt number

AVAiLAbiLitY bY reGion

AmericAs north AmericAs south AsiA PAciFic eAme

Loctite c5-A coPPer Anti-Seize LubricAnt

222-3114

� � �

LOCTITE8007

4C-5598

LOCTITE80084C-5599

5P-3931

Loctite GrAPHite-50 Anti-Seize

4C-5592

� � � LOCTITE80094C-5593

6V-4876,186-1531

Loctite MoLY PASte, MetAL-Free — � � � LOCTITE8012

Loctite nicKeL Anti-Seize 337-7965 � � � LOCTITE8009

Loctite c5-A coPPer Anti-Seize SticK — � � � LOCTITE8065

Loctite SiLVer GrAde Anti-Seize SticK — � � � 6

CLiCk on proDuCt nAMe to return

GLobAL AVAiLAbiLitY

SpeciAlty AdheSiveSLoctite Product cAt PArt number



Loctite 330 dePend AdHeSiVe 308-3506,185-4003 � � � �Loctite bLAcK contAct AdHeSiVe 5H-2471,185-4591 � � � ZEMENTBEweiß

Loctite contAct AdHeSiVe — � 6 � TEROKAL2444

Loctite MAXiMuM StrenGtH HeAdLiner AdHeSiVe — � � � ADHESINJ1626

Loctite ALL-PurPoSe SPrAY AdHeSiVe 222-3113 � � � TEROSONKarosserie-Klebe-Spray

StructurAl AdheSiveSLoctite Product cAt PArt number



Loctite FiXMASter FASt cure ePoXY MiXer cuPS 266-3144 � � � LOCTITE3430

Loctite FiXMASter GenerAL-PurPoSe ePoXY MiXer cuPS — � � � LOCTITE3423

Loctite 3034 StructurAL AdHeSiVe, touGHened, PoLYoLeFin bondinG, 2-PArt AcrYLic

— � � � LOCTITE3038

Loctite 332 StructurAL AdHeSiVe, SeVere enVironMent — � � � LOCTITE3342

Loctite H3000 StructurAL AdHeSiVe 209-0987 � � � �





inStAnt AdheSiveSLoctite Product cAt PArt number



Loctite 380 bLAcK MAX inStAnt AdHeSiVe 152-9155 � � � �Loctite 401 inStAnt AdHeSiVe, SurFAce inSenSitiVe — � � � �

Loctite 406 inStAnt AdHeSiVe — � � � �Loctite 410 inStAnt AdHeSiVe, touGHened — � � � �Loctite 411 inStAnt AdHeSiVe — � � � LOCTITE409

Loctite 414 inStAnt AdHeSiVe 157-7228 � � � �Loctite 426 inStAnt AdHeSiVe, bLAcK, touGHened GeL — � � � LOCTITE410

Loctite 454 inStAnt AdHeSiVe — � � � �Loctite 480 inStAnt AdHeSiVe, bLAcK, touGHened — � � � �

Loctite 495 inStAnt AdHeSiVe — � � � �Loctite 496 inStAnt AdHeSiVe — � � � �Loctite 498 inStAnt AdHeSiVe — � � � LOCTITE435

Loctite QuicKtite GeL — � LOCTITE454 � LOCTITE454

cleAnerSLoctite Product cAt PArt number



Loctite odc-Free cLeAner & deGreASer — � � � �Loctite cHiSeL PAint StriPPer, MetHYLene cHLoride — � � � 6

Loctite cHiSeL Mc-Free PAint StriPPer — � � LOCTITE7200 LOCTITE7200

Loctite nAturAL bLue biodeGrAdAbLe cLeAner & deGreASer, ALL-PurPoSe — � � � LOCTITE7840

Loctite non-cHLorinAted PArtS cLeAner 222-3117,222-3118 � � � TEROSONBrakeClean

Loctite eLectricAL contAct cLeAner, nonFLAMMAbLe 222-3124,222-3119 � � � LOCTITE7039

Loctite Pro StrenGtH PArtS cLeAner — � � LOCTITE7063 LOCTITE7063

Loctite induStriAL HAnd WiPeS � 6 � 6

Loctite HAndcLeAner WitH PuMice 6 � � 6

Loctite SMootH HAndcLeAner 6 � � �

Loctite 7012 — 6 6 � 6

Loctite 7013 — 6 6 � 6



GLobAL AVAiLAbiLitY


6 NotAvailable



cleAnerS (continued)Loctite Product cAt PArt number



Loctite 7018 — 6 6 � 6

turco WHite SoLVe ‘ec’ eLectricAL contAct cLeAner — LOCTITEElectricalContact

Cleaner,NonflammableLOCTITEElectricalContact

Cleaner,NonflammableLOCTITEElectricalContact

Cleaner,Nonflammable LOCTITE7039

YuK-oFF brAKe And PArtS cLeAner — LOCTITENon-ChlorinatedPartsCleaner

LOCTITENon-ChlorinatedPartsCleaner

LOCTITENon-ChlorinatedPartsCleaner TEROSONBrakeClean

SurfAce treAtment productSLoctite Product cAt PArt number



Loctite eXtend ruSt treAtMent — � � � LOCTITE7500

Loctite MAXi-coAt, ruSt inHibitor 222-3121 � � � LOCTITE7803

Silicone GASKetinG productSLoctite Product cAt PArt number



Loctite 5699 GreY HiGH PerForMAnce rtV SiLicone GASKet MAKer — � � � �Loctite 587 bLue HiGH PerForMAnce rtV SiLicone GASKet MAKer 141-5831 � � � �Loctite 598 bLAcK HiGH PerForMAnce rtV SiLicone GASKet MAKer 4C-9612 � � � �

Loctite 5900 FLAnGe SeALAnt165-2601

� � � �8T-0065,186-1527

Loctite 5999 FLAnGe SeALAnt — � � � �Loctite inStAnt GASKet — � � � LOCTITE5970

Loctite SuPerFLeX 593 rtV SiLicone SeALer, bLAcK 3S-6252,185-3986 � � � LOCTITE5970

Loctite SuPerFLeX 595 rtV SiLicone AdHeSiVe, cLeAr 119-0781 � � � LOCTITE5366

Loctite SuPerFLeX 596 HiGH teMP rtV SiLicone AdHeSiVe, red

4C-9614� � � LOCTITE5399

8T-9013.205-8857

Loctite SuPerFLeX rtV SiLicone AdHeSiVe SeALAnt, bLAcK 141-5830 � � � LOCTITE5980

Loctite SuPerFLeX rtV SiLicone AdHeSiVe SeALAnt, bLue 8T-9022,185-3987 � � � LOCTITE5926

Loctite SuPerFLeX rtV SiLicone AdHeSiVe SeALAnt, red — � � � LOCTITE5399

Loctite SuPerFLeX noncorroSiVe rtV SiLicone AdHeSiVe, cLeAr 8T-9014,205-8858 � � � TEROSTAT9140




GLobAL AVAiLAbiLitY


6 NotAvailable



AnAerobic GASKetinG productSLoctite Product cAt PArt number



Loctite 5127 FLeXibLe AnAerobic GASKet FLAnGe SeALAnt 4C-5300,185-3984 � � � Turkey-LOCTITE5188

Loctite 515 FLAnGe SeALAnt — � � � �

Loctite HiGH FLeX ForM-in-PLAce GASKet 1U-8846,185-3983 � � � LOCTITE5127(128068)

Loctite Hi-teMPerAture FLAnGe SeALAnt 6V-6640,185-3985 � � � LOCTITE5188

Loctite 534 Hi-tAcK GASKet dreSSinG SticK — � � � 6

Loctite 548 FLAnGe SeALAnt SticK — � � � 6

Solvent GASKetinG productSLoctite Product cAt PArt number



Loctite 5923 AViAtion GASKet SeALAnt 4C-9505 � � � LOCTITE5923

Loctite GASKet SeALAnt #1 4C-9501 � � � LOCTITE5921

Loctite GASKet SeALAnt #2 4C-9502 � � � LOCTITE5922

Loctite Hi-tAcK GASKet SeALAnt 138-8436,185-4590 � � � LOCTITE5009

concrete repAir productSLoctite Product cAt PArt number



Loctite FiXMASter MAGnA-crete — � � � LOCTITE7257

GLobAL AVAiLAbiLitY





6 NotAvailable



lAppinG / mAchininG compoundSLoctite Product cAt PArt number



Loctite cLoVer SiLicon cArbide GreASe MiX, 80 Grit 226-6624 6 6 6 6

Loctite cLoVer SiLicon cArbide GreASe MiX, 240 Grit — � 6 6 6



diSpenSinG equipmentLoctite Product cAt PArt number



50 ML MiX nozzLe, 6.0 MM, StePPed tiP, 10:1 rAtioS-S StYLe cArdridGe (uSed WitH 50 ML duAL cQ)

— � � � RelatedAccessoriesareAvailable

HAnd HeLd duAL cArtridGe diSPenSe For 50 ML (uSed WitH 50 ML duAL cQ) — � � � ManualHandHeld

Applicator(96001)

Loctite 400 ML cArtridGe MAnuAL diSPenSer — � � 6 6

Loctite conVerter Kit, For HouSeHoLd cAuLKinG Gun, AccePtS 50 ML — � 6 6 6

Loctite Luer/StePPed nozzLeS For 50 ML StructurAL AdHeSiVe (10 Per PAcK) — � AppropriateNozzles

areAvailableAppropriateNozzles

areAvailableAppropriateNozzles

areAvailable

Loctite StAtic MiXer nozzLe, Mc08-24 1:1/2:1 — � � � �

needLe, 18GA, ¼" SS, Grn, 50PK — � AppropriateNozzlesareAvailable

AppropriateNozzlesareAvailable

AppropriateNozzlesareAvailable

SeAlAntSLoctite Product cAt PArt number



Loctite inSuLAtinG & SeALinG WrAP, bLAcK, 2" x 36' — � 6 6 6

Loctite inSuLAtinG & SeALinG WrAP, bLAcK, 1" x 10' — � 6 6 6

Loctite inSuLAtinG & SeALinG WrAP, red, 1" x 10' — � 6 6 6

GLobAL AVAiLAbiLitY





6 NotAvailable



KitSLoctite Product cAt PArt number



Loctite o-rinG MAKinG Kit — � � � �Loctite SeMiSoLid SticK eMPtY HoLSter, ProMo iteM WHiLe SuPPLieS LASt — � 6 6 6

Loctite tooLboX (contAinS 220, 222, 243, 263, 248, 249, 268, 518, 545, 561, 565, 587, 660, 7649, 404, 7088, c5-A)

— � � � 6

Loctite ForM-A-tHreAd StriPPed tHreAd rePAir Kit — � � � 6

lubricAntSLoctite Product cAt PArt number



Loctite dieLectric GreASe — � � � �

Loctite Freeze & reLeASe — � � � LOCTITE8040

Loctite GeAr, cHAin & cAbLe LubricAnt 222-3110 � LOCTITELubricanteCadenas � LOCTITE8101

Loctite MoLY drY FiLM LubricAnt 242-6990 � � � LOCTITE8191

Loctite PenetrAtinG oiL 222-3123 � LOCTITEAflojatodo � LOCTITE8001

Loctite SiLicone LubricAnt — � � � LOCTITE8104

Loctite SoLVo-ruSt SuPer PenetrAtinG oiL 222-3115 LOCTITE8040 LOCTITE8040 LOCTITE8040

Loctite ViPerLube HiGH PerForMAnce SYntHetic GreASe — � � � LOCTITE8102

metAl-filled repAir epoxieSLoctite Product cAt PArt number



Loctite FiXMASter FASt Set SteeL PuttY 1U-6140,207-7532 � � � LOCTITE3473A&B

Loctite FiXMASter MetAL MAGic SteeL 8T-9018

� � � LOCTITE34638T-9019

Loctite FiXMASter SuPerior MetAL 1U-6136,207-7530 � � � LOCTITE3478A&B

GLobAL AVAiLAbiLitY





6 NotAvailable



WeAr-reSiStAnt coAtinGSLoctite Product cAt PArt number



Loctite FiXMASter WeAr reSiStAnt PuttY 1U-6132,207-7531 � � � LOCTITE3474A&B

Loctite FiXMASter FLeX 80 PuttY 144-7779 � � � TEROMIx6700

AnAerobic primerSLoctite Product cAt PArt number



Loctite 7088 PriMer SticK — � 6 6 6Loctite 7090 PriMer/ActiVAtor, SoLVentLeSS — � � � �Loctite 7091 PriMer (For dicHroMAted SurFAceS) — � � � �

Loctite 7649 PriMer n 169-5464,185-4004 � � � �

cyAnoAcrylAte primerLoctite Product cAt PArt number



Loctite 770 PriMer (For cYAnoAcrYLAteS) — � � � �

GLobAL AVAiLAbiLitY





6 NotAvailable



GLobAL AVAiLAbiLitY

threAd SeAlAntSLoctite Product cAt PArt number



Loctite HeAd boLt & WAter JAcKet SeALAnt — � 6 6 6

Loctite 536 LoW breAKLooSe PiPe SeALAnt 5P-3413,185-3992 � � � Turkey-LOCTITE567

Loctite 545 tHreAd SeALAnt, HYdrAuLic/PneuMAtic FittinGS — � � � LOCTITE577

Loctite 577 tHreAd SeALAnt — � � � �

Loctite 592 tHreAd SeALAnt, controLLed StrenGtH — � � � LOCTITE567

Loctite 561 PiPe SeALAnt WitH PtFe SticK — � � � 6

Loctite PtFe tHreAd SeALinG tAPe, ½" x 520" x 0.003" — � � 6 6

retAininG compoundSLoctite Product cAt PArt number



Loctite 232 retAininG coMPound, WHeeL Mount, HiGH LubricitY, LoW StrenGtH — � � � �

Loctite 540 AdHeSiVe/SeALAnt, cuP/core PLuG — � � � LOCTITE549

Loctite 603 retAininG coMPound — � � � LOCTITE648

Loctite 609 retAininG coMPound, PreSS Fit, GenerAL-PurPoSe

4C-4032� � � Turkey-LOCTITE601

7M-7456,185-3994

Loctite 620 retAininG coMPound, SLiP Fit, HiGH teMPerAture

4C-9506� � � �

4C-9507,185-3988

Loctite 638 retAininG coMPound, SLiP Fit, MAXiMuM StrenGtH — � � � �

Loctite 640 retAininG coMPound — � � � �

Loctite 648 retAininG coMPound, PreSS Fit, HiGH StrenGtH, rAPid cure — � � � �

Loctite 660 QuicK MetAL retAininG coMPound, PreSS Fit 269-1943 � � � �

Loctite 668 retAininG coMPound SticK — � � � 6




6 NotAvailable



threAdlocKerSLoctite Product cAt PArt number



Loctite 222 tHreAdLocKer, LoW StrenGtH, SMALL ScreW — � � � �

Loctite 242 tHreAdLocKer, MediuM StrenGtH

4C-4030

� � � �9S-3263,185-3996

Loctite 243 tHreAdLocKer, MediuM StrenGtH, SurFAce inSenSitiVe — � � � �

Loctite 263 tHreAdLocKer, HiGH StrenGtH — � � � LOCTITE270

Loctite 271 tHreAdLocKer, HiGH StrenGtH154-9731

� � � �155-0695,185-3998

Loctite 272 tHreAdLocKer, HiGH teMPerAture — � � � �

Loctite 277 tHreAdLocKer, LArGe HeAVY dutY boLtS — � � � �

Loctite 290 tHreAdLocKer, HiGH StrenGtH, WicKinG GrAde 4C-9509 � � � �

Loctite 248 tHreAdLocKer, MediuM StrenGtH SticK — � � � �

Loctite 268 tHreAdLocKer, HiGH StrenGtH SticK — � � � �

Loctite QuicKtAPe 249 — � � � �

SeAm SeAlAntSLoctite Product cAt PArt number



Loctite 5510 cLeAr AdHeSiVe/SeALAnt — � � 6 6

Loctite 5512 bLAcK AdHeSiVe/SeALAnt — TEROSONMS939 TEROSONMS939 TEROSONMS939

Loctite HYSoL e-04SS — � � 6 �

WindoW GlAzinG productSLoctite Product cAt PArt number



teroSon teroStAt 8519 H GLASS PriMer — � TEROSONTEROSTAT8517 � TEROSONTEROSTAT8517

teroSon teroStAt 8517 P PriMer/ActiVAtor — TEROSONTEROSTAT8519 � TEROSONTEROSTAT8519 �teroSon teroStAt 8597 PL HMLc direct GLAzinG AdHeSiVe — � TEROSTAT8590 � �

teroSon FL+ — � 6 6 6

GLobAL AVAiLAbiLitY





6 NotAvailable



indeX

proDuCt DeSCription ALternAtive proDuCt pAGe no.

50 ml Mix nozzle, 6.0 mm, Stepped tip, 10:1 ratios-S Style Cartridge (used with 50 ml Dual Cq)

related Accessories are Available

8

hand held Dual Cartridge Dispense for 50 ml (used With 50 ml Dual Cq)

Manual hand held Applicator (96001)

8

LoCtite 222 threadlocker, Low Strength, Small Screw — 15

LoCtite 232 retaining Compound, Wheel Mount, high Lubricity, Low Strength — 13

LoCtite 242 threadlocker, Medium Strength — 15

LoCtite 243 threadlocker, Medium Strength, Surface insensitive — 15

LoCtite 248 threadlocker Stick, Medium Strength — 15

LoCtite 263 threadlocker, high Strength — 15

LoCtite 268 threadlocker Stick, high Strength — 15

LoCtite 271 threadlocker, high Strength — 15

LoCtite 272 threadlocker, high temperature — 15

LoCtite 277 threadlocker, Large heavy Duty bolts — 15

LoCtite 290 threadlocker, high Strength, Wicking Grade — 15

LoCtite 330 DepenD Adhesive — 3

LoCtite 332 Structural Adhesive, Severe environment LoCtite 3342 3

LoCtite 380 black Max instant Adhesive — 2

LoCtite 400 ml Cartridge Manual Dispenser — 8

LoCtite 401 instant Adhesive, Surface insensitive — 2

LoCtite proDuCt DeSCription inDex


LoCtite 406 instant Adhesive — 2

LoCtite 410 instant Adhesive, toughened — 2

LoCtite 411 instant Adhesive LoCtite 409 2

LoCtite 414 Structural Adhesive — 2

LoCtite 426 instant Adhesive, black, toughened Gel LoCtite 410 2


LoCtite 480 instant Adhesive, black, toughened — 2



LoCtite 498 instant Adhesive LoCtite 435 2

LoCtite 515 Flange Sealant — 7

LoCtite 534 hi-tack Gasket Dressing Stick no Similar product Available 7

LoCtite 536 Low breakloose pipe Sealant turkey - LoCtite 567 14

LoCtite 540 Adhesive/Sealant, Cup/Core plug LoCtite 549 13

LoCtite 545 thread Sealant, hydraulic/pneumatic Fittings LoCtite 577 14

LoCtite 548 Gasket Flange Sealant Stick no Similar product Available 7

LoCtite 561 pipe Sealant with ptFe Stick no Similar product Available 14

LoCtite 587 blue high performance rtv Silicone Gasket Maker — 6





LoCtite 592 thread Sealant, Controlled Strength LoCtite 567 14

LoCtite 598 black high performance rtv Silicone Gasket Maker — 6

LoCtite 603 retaining Compound LoCtite 648 13

LoCtite 609 retaining Compound, press Fit, General-purpose turkey - LoCtite 601 13

LoCtite 620 retaining Compound, Slip Fit, high temperature — 13

LoCtite 638 retaining Compound, Slip Fit, Maximum Strength — 13

LoCtite 640 retaining Compound — 13

LoCtite 648 retaining Compound, press Fit, high Strength, rapid Cure — 13

LoCtite 660 retaining Compound, press Fit — 13

LoCtite 668 retaining Compound Stick no Similar product Available 13

LoCtite 770 primer (for Cyanoacrylates) — 12

LoCtite 3034 Structural Adhesive, toughened, polyolefin bonding, 2-part Acrylic

LoCtite 3038 3

LoCtite 5127 Flexible Anaerobic Gasket Flange Sealant turkey – LoCtite 5188 7

LoCtite 5510 Clear Adhesive/Sealant — 16

LoCtite 5512 black Adhesive/Sealant LoCtite MS 939 16

LoCtite 5699 Grey high performance rtv Silicone Gasket Maker — 6


LoCtite 5923 Aviation Gasket Sealant LoCtite 5923 7



LoCtite 7012 — 5

LoCtite 7013 — 5

LoCtite 7018 — 5

LoCtite 7088 primer Stick no Similar product Available 12

LoCtite 7090 Activator/primer, Solventless — 12

LoCtite 7091 primer (For Dichromated Surfaces) — 12

LoCtite 7649 primer n — 12

LoCtite All-purpose Spray Adhesive teroSon karosserie- klebe-Spray 3

LoCtite black Contact Adhesive zeMent be weiß 3

LoCtite C5-A Copper Anti-Seize Stick LoCtite 8065 1

LoCtite C5-A Copper Anti-Seize Lubricant LoCtite 8007 & LoCtite 8008 1

LoCtite ChiSeL paint Stripper, Methylene Chloride no Similar product Available 4

LoCtite ChiSeL MC-Free paint Stripper LoCtite 7200 4

LoCtite Clover Silicon Carbide Grease Mix no Similar product Available 8

LoCtite Contact Adhesive terokAL 2444 3

LoCtite Converter kit, For household Caulking Gun, Accepts 50 ml no Similar product Available 8

LoCtite Dielectric Grease no Similar product Available 10

indeX




LoCtite electrical Contact Cleaner, nonflammable LoCtite 7039 4

LoCtite extend rust treatment LoCtite 7500 5

LoCtite FixMASter Fast Cure epoxy Mixer Cups LoCtite 3430 3

LoCtite FixMASter Fast Set Steel putty LoCtite 3473 A&b 11

LoCtite FixMASter Flex 80 putty teroMix 6700 11

LoCtite FixMASter General-purpose epoxy Mixer Cups LoCtite 3423 3

LoCtite FixMASter Magna-Crete LoCtite 7257 8

LoCtite FixMASter Metal Magic Steel LoCtite 3463 11

LoCtite FixMASter Superior Metal LoCtite 3478 A&b 11

LoCtite FixMASter Wear resistant putty LoCtite 3474 A&b 11

LoCtite Form-A-thread Stripped thread repair kit no Similar product Available 9

LoCtite Freeze & release LoCtite 8040 10

LoCtite Gasket Sealant #1 LoCtite 5921 7

LoCtite Gasket Sealant #2 LoCtite 5922 7

LoCtite Gear, Chain & Cable Lubricant LoCtite 8101 10

LoCtite Graphite-50 Anti-Seize LoCtite 8009 1

LoCtite h3000 Structural Adhesive — 3

LoCtite hand Cleaner with pumice — 4


LoCtite head bolt & Water jacket Sealant no Similar product Available 14

LoCtite hi-tack Gasket Sealant LoCtite 5009 7

LoCtite hi-temperature Flange Sealant LoCtite 5188 7

LoCtite high Flex Form-in-place Gasket LoCtite 5127 (128068) 7

LoCtite hysol e-04SS — 16

LoCtite industrial hand Wipes — 4

LoCtite instant Gasket LoCtite 5970 6

LoCtite insulating & Sealing Wrap, black, 1" x 10' no Similar product Available 9

LoCtite insulating & Sealing Wrap, black, 2" x 36' no Similar product Available 9

LoCtite insulating & Sealing Wrap, red, 1" x 10' no Similar product Available 9

LoCtite Luer/Stepped nozzles for 50 ml Speedbonder (10 per pack)

Appropriate nozzles are Available

8

LoCtite Maxi-Coat, rust inhibitor LoCtite 7803 5

LoCtite Maximum Strength headliner Adhesive ADheSin j1626 3

LoCtite Moly Dry Film Lubricant LoCtite 8191 10

LoCtite Moly paste, Metal-Free LoCtite 8012 1

LoCtite natural blue biodegradable Cleaner & Degreaser, All-purpose LoCtite 7840 4

LoCtite nickel Anti-Seize LoCtite 8009 1

LoCtite non-Chlorinated parts Cleaner teroSon brake Clean 4

indeX





LoCtite oDC-Free Cleaner & Degreaser — 4

LoCtite o-ring Making kit — 9

LoCtite penetrating oil LoCtite 8001 10

LoCtite pro Strength parts Cleaner LoCtite 7063 4

LoCtite ptFe thread Sealing tape, ½" x 520" x 0.003" no Similar product Available 14

LoCtite quicktape 249 no Similar product Available 15

LoCtite quicktite Gel LoCtite 454 2

LoCtite Semisolid Stick empty holster, promo item While Supplies Last no Similar product Available 9

LoCtite Silicone Lubricant LoCtite 8104 10

LoCtite Silver Grade Anti-Seize Stick no Similar product Available 1

LoCtite Smooth hand Cleaner — 4

LoCtite Solvo-rust Super penetrating oil LoCtite 8040 10

LoCtite Static Mixer nozzle, MC08-24 1:1/2:1 — 8

LoCtite SuperFLex 593 rtv Silicone Sealer, black LoCtite 5970 6

LoCtite SuperFLex 595 rtv Silicone Adhesive, Clear LoCtite 5366 6

LoCtite SuperFLex 596 high temp rtv Silicone Adhesive, red LoCtite 5399 6


LoCtite SuperFLex rtv Silicone Adhesive Sealant, black LoCtite 5980 6

LoCtite SuperFLex rtv Silicone Adhesive Sealant, blue LoCtite 5926 6

LoCtite SuperFLex rtv Silicone Adhesive Sealant, red LoCtite 5399 6

LoCtite SuperFLex rtv Silicone Adhesive, Clear, noncorrosive teroStAt 9140 6

LoCtite toolbox (Contains 220, 222, 243, 263, 248, 249, 268, 518, 545, 561, 565, 587, 660, 7649, 404, 7088, C5-A)

no Similar product Available 9

LoCtite viperLube high performance Synthetic Grease LoCtite 8102 10

needle, 18GA, ¼" SS, Grn, 50pk Appropriate needles Are Available 8

teroSon FL+ — 16

teroSon teroStAt 8517 p primer/Activator — 16

teroSon teroStAt 8519 h Glass primer teroSon teroStAt 8517 16

teroSon teroStAt 8597 pL hMLC Direct Glazing Adhesive — 16

turco White Solve ‘eC’ electrical Contact Cleaner LoCtite 7039 5

yuk-off brake And parts Cleaner teroSon brake Clean 5

indeX


44

CAt pArt nuMber proDuCt DeSCription pAGe no.

119-0781 LoCtite SuperFLex 595 rtv Silicone Adhesive, Clear 6

138-8436 LoCtite hi-tack Gasket Sealant (Fomerly 30525) 7

141-5830 LoCtite SuperFLex rtv Silicone Adhesive Sealant, black 6

141-5831 LoCtite 587 blue high performance rtv Silicone Gasket Maker 6

144-7779 LoCtite FixMASter Flex 80 putty 11

152-9155 LoCtite 380 black Max instant Adhesive 2

154-9731 LoCtite 271 threadlocker, high Strength 15

155-0695, 185-3998 LoCtite 271 threadlocker, high Strength 15

157-7228 LoCtite 414 instant Adhesive 2

165-2601 LoCtite 5900 Flange Sealant 6

169-5464, 185-4004 LoCtite 7649 primer n 12

1u-6132, 207-7531 LoCtite FixMASter Wear resistant putty 11

1u-6136, 207-7530 LoCtite FixMASter Superior Metal 11

1u-6140, 207-7532 LoCtite FixMASter Fast Set Steel putty 11

1u-8846, 185-3982 LoCtite high Flex Form-in-place Gasket 7

209-0987 LoCtite h3000 Structural Adhesive 3

222-3110 LoCtite Gear, Chain & Cable Lubricant 10

222-3113 LoCtite All-purpose Spray Adhesive 3

222-3114 LoCtite C5-A Copper Anti-Seize Lubricant 1

222-3115 LoCtite Solvo-rust Super penetrating oil 10

222-3117 & 222-3118 LoCtite non-Chlorinated parts Cleaner 4

222-3119, 222-3124 LoCtite electrical Contact Cleaner, nonflammable 4

222-3121 LoCtite Maxi-Coat, rust inhibitor 5

222-3123 LoCtite penetrating oil 10

226-6624 LoCtite Clover Silicon Carbide Grease Mix, 80 Grit 8

242-6990 LoCtite Moly Dry Film Lubricant 10

266-3144 LoCtite FixMASter General-purpose epoxy Mixer Cups 3

269-1943 LoCtite 660 retaining Compound, press Fit 13

308-3506, 185-4003 LoCtite 330 DepenD Adhesive 3

337-7965 LoCtite nickel Anti-Seize 1

3S-6252, 185-3986 LoCtite SuperFLex 593 rtv Silicone Sealer, black 6

4C-4030 LoCtite 242 threadlocker, Medium Strength 15

CAterpiLLAr proDuCt nuMber inDexCAt pArt nuMber proDuCt DeSCription pAGe no.

4C-4032 LoCtite 609 retaining Compound, press Fit, General-purpose 13

4C-5300, 185-3984 LoCtite 5127 Flexible Anaerobic Gasket Flange Sealant 7

4C-5592 & 4C5593 LoCtite Graphite-50 Anti-Seize 1

4C-5598 LoCtite C5-A Copper Anti-Seize Lubricant 1

4C-5599 LoCtite C5-A Copper Anti-Seize Lubricant 1

4C-9501 LoCtite Gasket Sealant #1 7

4C-9502 LoCtite Gasket Sealant #2 7

4C-9505 LoCtite 5923 Aviation Gasket Sealant 7

4C-9506 LoCtite 620 retaining Compound, Slip Fit, high temperature 13

4C-9507, 185-3988 LoCtite 620 retaining Compound, Slip Fit, high temperature 13

4C-9509 LoCtite 290 threadlocker, high Strength, Wicking Grade 15

4C-9612 LoCtite 598 black high performance rtv Silicone Gasket Maker 6

4C-9614 LoCtite SuperFLex high temp rtv Silicone Adhesive, red 6

5h-2471, 185-4591 LoCtite black Contact Adhesive 3

5p-3413, 185-3992 LoCtite 536 Low breakloose pipe Sealant 14

5p-3931 LoCtite C5-A Copper Anti-Seize Lubricant 1

6v-4876, 186-1531 LoCtite Graphite 50 Anti-Seize 1

6v-6640, 185-3985 LoCtite hi-temperature Flange Sealant 7

7M-7456, 185-3994 LoCtite 609 retaining Compound, press Fit, General-purpose 13

8t-0065, 186-1527 LoCtite 5900 Flange Sealant 6

8t-9013, 205-8857 LoCtite SuperFLex 596 high temp rtv Silicone Adhesive Sealant, red 6

8t-9014, 205-8858 LoCtite SuperFLex rtv Silicone Adhesive, noncorrosive, Clear 6

8t-9018 & 8t-9019 LoCtite FixMASter Metal Magic Steel 11

8t-9022, 185-3987 LoCtite SuperFLex rtv Silicone Adhesive Sealant, blue 6

9S-3263, 185-3996 LoCtite 242 threadlocker, Medium Strength 15

For More inForMAtion AnD LAteSt verSion, viSit WWW.uSeLoCtite.CoM/CAterpiLLAr.


indeX

CLiCk on the CAt pArt nuMber to LeArn More

exceptasotherwisenoted,allmarksusedaretrademarksand/orregisteredtrademarksofHenkeland/oritsaffiliatesintheU.S.andelsewhere.CatandCaterpillarareregisteredtrademarksofCaterpillarInc.InconelandMonelaretrademarksofHuntingtonAlloysCorporation.KovarisatrademarkofCRSHoldings,Inc.Magna-CreteisatrademarkofKellyRestoration. ©HenkelCorporation,2012.Allrightsreserved.8503(8/12)

AMeriCAS north

henkeL CorporAtion1HenkelWayRockyHill,CT06067USAtel: 1-860-571-5100

Canada Tel:+1-905-814-6511

Mexico Tel:+52-55-3300-3644

AMeriCAS South

henkeL LtDA.RuaKarlHüller,136Jd.Canhema,DiademaSãoPaulo,Brazil09941-410Tel:+55-11-3205-8955

Argentina Tel:+54-11-4001-0100

Chile Tel:+56-2-381-7200

ASiA pACiFiC

henkeL ASiA-pACiFiC & ChinA heADquArterSNo.928ZhanghengRoadZhangjiangHigh-TechParkPudong, Shanghai China,201203Tel:+86-21-28918000

Australia Tel:+61-3-97246444

India Tel:+91-22-39296600

Indonesia Tel:+62-21-27586900

Japan Tel:+81-45-7581800

Malaysia Tel:+60-3-22461000

NewZealand Tel:+64-9-2726710

Philippines Tel:+63-49-5431088

Singapore Tel:+65-62660100

SouthKorea Tel:+82-2-32791700

Taiwan Tel:+886-2-22271988

Thailand Tel:+66-2-2098000

Vietnam Tel:+84-61-3835461

europe, AFriCA, MiDDLe eASt

henkeL AG & Co. kGaA heADquArterSHenkelstr.6740589DüsseldorfGermanyTel:+49(0)89-9268-0

Belgium Tel:+3224212555

estonia Tel:+372-730-58-00

France Tel:+33164177000

GCCDubai Tel:+971-4-3893-333

Italy Tel:+39-3346059576

Netherlands Tel:+31-30-6073850

Poland Tel:+48-22-56-56-200

Rumania Tel:+40-21-203-26-18

Russia Tel:+7-495-745-55-88

Spain&Portugal Tel:+34-93-290-49-05

Turkey Tel:+90-216-5794000

UnitedKingdom Tel:+44(0)1442278100

Documents

Maintenance Solutions Guide for Cat Dealers · StrenGtH HeAdLiner AdHeSiVe — A high strength aerosol product designed for bonding foam, carpet, fabric, plastic, rubber, etc. Resistant