Performer Illustrated Parts Manual Pumps and Dispensers PT-1930 Computer Programs All Gilbarco computer programs (including software on diskettes and within memory chips) are copyrighted by, and shall remain the property of, Gilbarco Inc.Such computer programs may also contain trade secret information.The duplication, disclosure, modication, or unauthorized use of computer programs isstrictly prohibited, unless otherwise licensed by Gilbarco. FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to subpart J of Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modications not expressly approved by the manufacturer could void the users authority to operate this equipment. Approvals Underwriters Laboratories: Gilbarco pumps and dispensers that bear the U.L. listing mark are listed under the U.L. le number MH1941. Weights and Measures: Gilbarco pumps and dispensers are evaluated by the National Institute of Standards and Technology (NIST) under the National Type Evaluation Program (NTEP). NIST has issued Certicates of Compliance (COC) for the following: California Air Resources Board (CARB): The Gilbarco approval for The Advantage motor fuel dispensers is on attachment A. New York City: The Advantage Series: NYFD C. of A. #4805.Legacy Series: NYFD C. of A. #4879. National Quality Assurance: Gilbarco is an ISO9001/BS5750 Part 1/EN29001 registered company, certicate number 5119. Permissions Gilbarco has been given permission by OPW and ASCO to use their illustrations. Patents Gilbarco products are manufactured or sold under one or more of the following U.S. patents.3,814,934 4,566,504 4,687,033 4,728,788 4,799,940 4,876,653 4,890,210 4,913,8134,936,445 4,938,251 4,939,730 4,986,445 5,013,434 5,029,100 5,040,577 5,083,8465,098,179 5,099,403 5,110,010 5,134,548 5,156,199 5,228,084 5,269,353 5,325,7065,345,979 5,355,915 D.262,971 D.265,092 D.316,471Additional U.S. and foreign patents pending. Trademarks The following are trademarks of Gilbarco Inc.:The Advantage MPD Proportional Flow Control Valve Super-Hi VaporVac G-SITE MPD Pro Blender Salesmaker Trimline * CRIND Highline MPD Precision Blender Salesmaker Pro Blender Ultra-Hi InfoScreen Transac Dimension Super-Hi Legacy This document is subject to change without notice. For information regarding Gilbarco Literature, call 910-547-5661.Model COC #The Advantage Series 90-115-A4MPD-3 Series: AE, AL, AP, AU 87-077A2MPD-2 Series: AK 87-077A2MPD-1 Series: AF, AG, AN, AR 89-019A1H111B Series: AC 88-226A3Model COC #Salesmaker ProBlender: AB 78-099Salesmaker Series: AM 88-129Trimline Series 91-088Dimension Series 93-081A1Legacy Series 94-027System Executive Order #Balance Vapor Recovery G-70-52System Executive Order VaporVac G-70-150-AB BS5750 Part 1/EN29001 Certicate No. 5119 PT-1930 Performer Illustrated Parts Manual 9/95 Page 1 Introduction Introduction This illustrated parts manual contains information about parts for Gilbarcos Performer of Pumps and Dispensers. How to Use Your Manual The manual is divided into the following sections: Model Number Breakdown Models Available Frame and Sheathing Hydraulics Area Table Setup The tables in your manual are setup as follows: # PartDescriptionCurrent Part NumberPrevious Part NumberQty.Single Unit PerformerDieselPRICE PER LITERLITERSTHIS SALEDual Unit PerformerExtra RegularPRICE PER LITERLITERSTHIS SALEPRICE PER LITERLITERSTHIS SALE# (Item Number)Callout on illustration or number in table.Part DescriptionDescription of part.Current Part NumberPart is in current production at Gilbarco.Previous Part NumberSuperseded by the current part number.Qty. (Quantity)How many of that part is needed for assembly.Note: as req. means as required Introduction Page 2 PT-1930 Performer Illustrated Parts Manual 9/95 When ordering parts: 1 Please furnish model number, date code and original options. These are stamped on a plate riveted to the center of the main frame base. 2 Provide the following information: Quantity needed Part Number Description of part Color and graphics and other information needed for order entry items. Date Codes The two letter Date Code is stamped on the serial plate before the serial number. This code states the month and year of manufacture. Please use this chart for reference when determining date codes. Related Documents For part number changes and boards that can be used as spares, use PT-1867, Modular Electronics Board Guide. Month Codes A = January E = May J = SeptemberB = February F = June K = OctoberC = March G = July L = NovemberD = April H = August M = December Year Code B = 1993 E = 1996 H = 1999C = 1994 F = 1997 J = 2000D = 1995 G = 1998MFG.BY GI LBARCO,I NC.GREENSBORO,N. C.U. S. A. Under wr i t er s Labor t or i esI nc . Li s t edPowerOper at ed Di s pens i ng Dev i c eForFl ammabl e Li qui dsNo. HSeri alNo. ModelNo.5-Btn PresetCash/Credi tPPPE/M/Total i zersRotated PutdownsSpri ng Retri everFl exmast MountVDIFo ru s ewi t he q u i p me n ts p e c i f i e di ni n s t a l l a t i o ni n s t r u c t i o n s . N. Y. F. D. C.o fA. # 4 8 0 5JE1200Performer PT-1930 Performer Illustrated Parts Manual 9/95 Page 3 Model Number Breakdown Model Number Breakdown Performer The following models are available. Model Number Description JE1000 Pump,1-Grade, 1-Hose, Standard FlowJE1100 Pump,1-Grade, 2-Hose, Standard FlowJE1200 Pump,2-Grade, 2-Hose, Standard FlowJEA000 Dispenser,1-Grade, 1-Hose, Standard FlowJEA100 Dispenser, 1-Grade, 2-Hose, Standard FlowJEA200 Dispenser, 2-Grade, 2-Hose, Standard FlowJE1300 Pump,1-Grade, 1-Hose, High FlowJE1500 Pump,2-Grade, 2-Hose, High FlowJEA300 Dispenser, 1-Grade, 1-Hose, High FlowJEA400 Dispenser, 1-Grade, 2-Hose, High FlowJEA500 Dispenser, 2-Grade, 2-Hose, High Flow Performer Electronics Page 4 PT-1930 Performer Illustrated Parts Manual 9/95 Performer Electronics Plate 1 CD (Computer Display) Module (W03565-G1)12345678910(See Plate 3)11121314161517 PT-1930 Performer Illustrated Parts Manual 9/95 Page 5 Performer Electronics # PartDescriptionCurrent Part NumberPrevious Part NumberQty. 1 Keypad overlay T17855-XX - 1/ side2 Gasket, Customer Programmable Preset R19509-01 - 1/side3 Customer Programmable Preset Faceplate R20266-G1 - 1/side4 PCB Pump Preset Display Assembly T17328-G1 - 1/side5 Top Cover Assembly (Low) 1 W03552-XX - 16 Display Window Bracket T19655-01 - as req.7 Main Window Display N23688-01 - as req.8 Main Window Gasket N23692-01 - 49 Cross Brace R20263-01 - 310 Motor Control Assembly (3 phase) See Plate 3 T19673-XX - 111 Computer Display (CD) Side Support Assembly W03567-G1 - 212 Conduit (See Plate 7)13 Conduit Washer3/4 N16599-92 - as req.14 Conduit Nut3/4 K93487 - as req.15LCD Main Display 1.52 cm. (0.6) T17701-G1 - as req.LCD Main Display 2.54 cm (1) T17962-G1 - as req.16Backlight as req..1 LCD assembly T17622-G6 - as req..6 LCD assembly (.6 reflector) T17622-G9 - as req.1 LCD assembly (.7 reflector) T17622-G5 - as req.17Display Mask 1.52 cm (0.6) T19635-01 - as req.Display Mask 2.54 cm (1) T19636-01 - as req. Performer Electronics Page 6 PT-1930 Performer Illustrated Parts Manual 9/95 Plate 2 CD Module Components1191817161554763214131211109820 PT-1930 Performer Illustrated Parts Manual 9/95 Page 7 Performer Electronics# PartDescriptionCurrent Part NumberPrevious Part NumberQty. 1 Customer Programmable Preset Board T17331-G3 - as req.2 I.S. Board Cover Assembly T19639-01 - 13 I.S. Barrier Board T19301-G1 - 14 CD Lower Support Assembly W03566-01 - 15 CD Module Base W03565-G1 - 16 Conduit Washer3/4 N16599-92 - 27 Conduit Nut3/4 K93487 - 28 Lock and Key Assembly Q12928-02 - 19 Key K89699-07 110 Operator Keypad Bracket Assembly T19678-G1 - 111 Operator Keypad Bracket Gasket N23701-01 - 112 Voltage Select Plug 115VAC N21120-G6 - 1220VAC N21120-G8 - 1230VAC N21120-G9 - 1240VAC N21120-G10 - 113 Fuse, F1 (3Amp, 250VAC, Slo-Blo)Q10131-03 - 114 Fuse HolderQ11781-01 - 115 Transformer 115/220-240 VAC 50/60 Hz with Backlights Q12939-02 Q12939-01- 116 EMI Filter 6 amp. Q10895-07 - 117 Foam Pad PCB Spacer N23702-02 - 218 Foam Pad PCB Spacer N23702-01 - 119 Hydraulics Interface Board T18994-G1 - 120 Pump Controller Board T18904-G2 - 121 Manager keypad (not shown) T17549-G1 - 1 Performer Electronics Page 8 PT-1930 Performer Illustrated Parts Manual 9/95 Plate 3 Motor Control Assembly # PartDescriptionCurrent Part NumberPrevious Part NumberQty. 1 Shield Cover Assembly T19676-G1 - 12 Surge Suppressor Assembly N23214-G1 - as req.3 Motor Contractor (3 phase) R19406-03 - as req.4 Relay Overload (3 phase) R19406-02 - as req.5 Sems Screws 6-32 x 3/4 Q12083-18 - as req.6 Bracket Assembly T19672-G1 - 17 Cable Assembly(dual) T18551-G3 - 1Cable Assembly (single) T18551-G4 - 18 Cable Assembly (low voltage) R19733-G2 - 19 Bushing, snap S K85071-15 - 110 Motor Control Assembly T19673-xx - 1786549321 PT-1930 Performer Illustrated Parts Manual 9/95 Page 9 Performer Electronics Plate 4 Electronic Cables # PartDescriptionAssociatedPlugs and JacksCurrent Part NumberPrevious Part NumberQty. 1 Logic/Main Display (1) A1, B1, J204-A2, B2 T19571-G1 - 12 Logic/Main Display (.6) J801, J204 T17768-G1 - 13 Backlight P302, J802A/B/C/D, WT1/2 T17766-G3 - 14 Controller/Interface J205, J305 R19952-G1 - 15 Controller/Interface J206, J306 R19939-G1 - 16 Controller/interface J207,J203,J901,J307 R19951-G1 - 27 Main DC Cable Assembly J405, J115, J407 T19675-G1 - 18 24 Volt Cable Assembly J308, T1 R20234-G1 - 19 Two-Wire Cable Assembly J208, P402 R20235-G1 - 110 Power Supply Cable J605, J604 T19572-G1 - 111 Filter to Fuse F1-2, FL1-3 R15634-G59 - 112 Line Filter to Ground FL1-5, E1 R15634-G114 - 113Pulser ConduitJ111A, J113, J27B, PHB, PHA, J27AT19573-G1 - 114 Main Conduit J309, P604, J402 T19638-G1 - 115 Main Conduit, 3-phase J309, P604, ,P406, J402 T19638-G2 - 116 PPP to Controller J201, J411 R20231-G1 - 117 PPP to Display J412, J612 R20232-G1 - 218 Five-Button Preset to Controller P130A/B, J202 T19048-G2 - 119 Pump Stop/R19527 J131A/B, J802 T19336-G4 - 120 Controller/T19336 J204, P802, P204A R19527-G1 - 121 DC Cable, (three-phase cables) P407 R19733-G2 - 122 AC Cable (dual), (three-phase cables) J406, K2-T1, K2-T2, K2-T3, K1-T1, K1-T2, K1-T3, K2-L3, K2-L2, K2-L1, K1-L3, K1-L2, K1-L1T18551-G3 - 123 AC Cable (single), (three-phase cables) J406, K1-T1, K1-T2, K1-T3, K1-L3, K1-L2, K1-L1T18551-G4 - 1 Frame and Sheathing Page 10 PT-1930 Performer Illustrated Parts Manual 9/95 Frame and Sheathing Plate 5 Frame and Sheathing515131211 1098 7643211614 PT-1930 Performer Illustrated Parts Manual 9/95 Page 11 Frame and Sheathing 1 Order Entry, Customer specific item please specify color and graphics when ordering. 2 Quantity as needed. 3 Dispensers only. # PartDescriptionCurrent Part NumberPrevious Part NumberQty. 1 Side Sheathing W03569-XX - as req.2 Top Sheathing T19656-01 - 13 Support Column W03568-G1 - 24 Sheathing Column W03564-01 - 25 Outer Frame Assembly W03368-G2 - 16 Lower Door (includes locks and keys) 1 T19334-GXX - 27 Inlet Support Bracket 3 W03394 - 18 Lower Frame Assembly W03367-G1 - 19 Pump and Motor Support Plate (Pumps only) W03381-G1 - 110 Tee Bolt 5/16-18 x 3/4 3 K83759-20 - 211 Key 2 K83512-25 - 212 Panel Lock 2 K83512-30 - 213 Washer, Nylon 2, K83513-10 - 214 Cam, Lock 2 K93552 - 215 Washer, Nylon 2 K83513 - 216 Spring 2 K83382 - 217 Hex Nut 5/16-18 (not shown) 2, 3 Q11890-05 - 218 U-bolt 5/16-18 (not shown) 2, 3 K13204 - 2 Frame and Sheathing Page 12 PT-1930 Performer Illustrated Parts Manual 9/95 Plate 6 Nozzle Boot # PartDescriptionCurrent Part NumberPrevious Part NumberQty.* 1 Nozzle Hook T19670-01 - 12 Screw K85736-43 - 13 Teflon Washer K86607-05 - 14 Screw K50599-23 - 25Screw K85736-45 - 26 Washer K50411-38 - 27 Nozzle Boot Flap N23687-01 - 18 Retaining Ring, 3/8 K76238-37 - 19 Nozzle Boot R20269-01 - 110 Nozzle Boot Switch Cam and Shaft Assembly N23693-G1 - 111 Spring K89852 - 112 Sem Screws Q12083-01 - 413 Reed Switch Proximity Magnet Q12514-0114 Reed Switch AcutatorQ12514-05 - 115 Nozzle Switch Bracket R20271-G1 - 116 Nut Q11890-03 - 117 Clinch stud (part of W03568-G1 column) K83677-29 - 1 * Quantity show as per nozzle hose assembly15141312111987543211217616 PT-1930 Performer Illustrated Parts Manual 9/95 Page 13 Hydraulic Area Hydraulic Area Plate 7 Junction Box and Conduit1762135521127843111920a1491681820b222310152221 Hydraulic Area Page 14 PT-1930 Performer Illustrated Parts Manual 9/95 Junction Box and Conduit, Continued 1 Quantity varies with model. 2 Parts are usable on other Gilbarco pumps and dispensers. # PartDescriptionCurrent Part NumberPrevious Part NumberQty. 1 Formed Conduit A-side Solenoid T19310 - 12 Conduit Elbow 1/2 x 90 MxF 1, 2 K42448 - as req.3 Conduit Elbow 1/2 x 90 FxF 1, 2 K42428 - as req.4 Formed Conduit B-side Solenoid R12579-130 - as req.5 Conduit Union 1/2 MxF N16289-20 - 16Conduit and Wire Assembly (3-Phase) T19638-G2 - 1Conduit and Wire Assembly (1 phase) T19638-G1 - 17 Conduit Union 3/4 MxF Q10016-05 - 18 Pipe Plug 3/4 1, 2 K57624 K02282 as req.9 Junction Box W03245-10 - 110 Solid State Relay (single-phase pumps only) 1, 2 Q11008-04 - as req.11 Junction Box Cover W03244-10 - 112 Bolt 5/16-18 x7/8 Q10865-01 - 1213 Conduit Nipple 1/2 x 1 1/2 K09228 - as req.14 Formed Conduit A-side Motor (Pumps only) R12579-129 - 115 Conduit Union 1/2 FxF 1, 2 N16289-21 - 116 Conduit Nipple 1/2 x 3 LG K88207-02 - 117 Formed Conduit B-side Motor (Pumps only) R12579-128 - 118Varistor 110/115/120VAC 2 T17448-G1 - 1Varistor 220/230/240VAC 2 T17448-G3 - 119 Pipe Plug 1/2 1, 2 K85773 K02281 as req.2020a20bJunction Box Bracket Pump T19294 - 1Dispenser T19340 - 121 Junction Box Shield (electrical) T19562 - 122 Reducer 1/2 x 3/4 1, 2 K49827 - as req. PT-1930 Performer Illustrated Parts Manual 9/95 Page 15 Hydraulic Area Plate 8 Hydraulic Manifold Area Quantity shown per module16476543212427214154201817111413129 59109825242323 2219 Hydraulic Area Page 16 PT-1930 Performer Illustrated Parts Manual 9/95 Hydraulic Manifold Area, Continued 1 Dispensers only. 2 Pumps only. 3 Quantity as needed. 4 Also used on The Advantage and Dimension Series. 5 Common to all Gilbarco dispensers. # PartDescriptionCurrent Part NumberPrevious Part NumberQty. 1 T-Bolt K83759-21 - 22 Nut Q11890-05 - 23 Discharge Casting W03379-10 - 14 Bolt 5/16-18 x 7/8 3 Q10865-01 - as req.5 O-Ring 1-1/4 x 1/8 x 1-1/2 4 Q10068-09 - 36 Meter see Plate 15 - 17 Meter Check Valve 2, 4 N23276-G1 - 18 Seal Plate R20072 - 19 O-Ring 1-5/8 x 1/8 x 1-7/8 4 Q10068-14 - 310 Casting, Manifold 4 W02808-10 - 111 O-Ring 2-3/8 x 1/8 x 2-5/8 4 Q10068-20 - 312 Solenoid Repair Kit (includes diaphragm, spring and washer) 3, 4 R19093-01 - as req.13 Solenoid Valve R20008 - 114 Coil, 115VAC 3 R20008-05 - as req.Coil, 240VAC 3 R20008-06 - as req.15 Manifold Support Bracket T19293 - 116 Filter Cap (High Capacity) with gasket 4 R18896-G1 - 117 Fuel Collector 3, 4 K35493 - as req.18 Filter, High Capacity 4 R18189-10 - 1Filter, High Capacity 30 micron 4 R18189-30 - 1Filter, High Capacity (Water Alert) 4 R20039 - 119 Gasket K93485 - as req.20 Filter Strainer 4 R19457 - 121 Feedline One-Hose, One-Product and Two-Hose, Two-Product 2 T19290-G1 - 122 Feedline Two-Hose, One-Product 2 W03390-G1 - 123 Union 1-1/2 1, 3 K12179 - as req.24 Nipple 1-1/2 x 7-1/8 1, 3, 4 R11493-20 - as req.25 Feedline Two-Hose, One-Product 1 W03391-G1 - 126 Feedline One-Hose, One-Product and Two-Hose, Two-Product 1 R20105-G1 - 1Shear Valve Single Poppet (not shown) 1, 3, 5 T18802-01 - as req. PT-1930 Performer Illustrated Parts Manual 9/95 Page 17 Hydraulic Area Plate 9 Meter All Models Quantity shown per meter. 1 Common to all Gilbarco pumps and dispensers with C Meter. # PartDescriptionCurrent Part NumberPrevious Part NumberQty. 1 Quad Ring Kit (shaft seal, gasket, screws, seal wire, alignment tools) 1 K35222 - 12 Valve Seal O-Ring 1 N18254-04 - 13 Gasket and O-Ring Kit (includes cover gaskets and o-rings, flange o-rings) 1 K35359 - 14 Formed Piston Cup 1 N21252 - 15 Adjuster Cylinder Cover Kit (includes pin, packing and seal wire) 1 K35361 - 16 Lower Housing O-Ring 1 Q10068-14 - 17 Valve Seal Kit (includes retainer and valve seal) 1 K35514 - 18 Gilbarco C MeterLiters (Mechanical and Commercial only) PA024TC28M - 1Liters with Seal Wires (Mechanical and Commercial only) PA024TC29M - 11237564 Hydraulic Area Page 18 PT-1930 Performer Illustrated Parts Manual 9/95 Plate 10 Hose Retriever Quantity shown per hose. 1 Also used on Highline Series. 2 Common to all Gilbarco pumps and dispensers. # PartDescriptionCurrent Part NumberPrevious Part NumberQty. 1 Bracket R20071 - 1 2 Hose Retriever and Cable Assembly (includes 2a-e) 1 N20545-02 - 1 2a Retriever Only 1N16839-21 - 1 2b Washer 1/2 1K02208 - 1 2c Lockwasher 1/2 1K47433 - 1 2d Nut 1/2-13 1K01945 - 1 2e Cable 70 1K87218-01 - 1 3 Nut 1/4-20 1K01941 - 14 Hose Grommet Assembly 1R18453 - 1 5 Hose Clamp 1 2N18320-21 - as req.Inner half for 3/4 for use with N18320-21 2N18319-04 - as req.Inner half for 5/8 for use with N18320-21 2K35522 - as req.2e4152a2b2c2d3PT-1930 Performer Illustrated Parts Manual 9/95 Page 19Hydraulic AreaPlate 11 Totalizer and PulserQuantity shown per pulser assembly.# PartDescriptionCurrent Part NumberPrevious Part NumberQty.1 Retaining Ring, 3/8 K76238-37 - 12 Driving Gear, 62 teeth (Metric) N22953 - 12a Driving Gear, 32 teeth (US Gallons) K88329-01 - 13 Ring K76238-36 - 24 Driving Gear, 30 teeth (Metric) K88329-03 - 14a Driving Gear, 32 teeth (US Gallons) K88329 - 15 Flat Washer N16599-70 - 16 Drive Gear Shaft K89619 - 17 Screw Set 5-40x K76707 - 28 Screw, 1/4-20 x 1/2 K05287 - 19 Screw 5/16-18 x 3/4 K85736-43 - 110 Gear Bracket Assembly (Metric) T19552-G110a Gear Bracket Assembly (US Gallons) T19615-G1 - 111 Nylon Spacer Q10385-33 - 112 Washer, 1/4 K14056 - 213 Delrin Gear N20965-14 - 114 Reinforcing Ring, 1/2 Q10217-09 - 1Metric1419181716151310876235432110a112aUS Gallons21242232012264aK88329 bore holesK88329 and K88329-03 K88329-019112519a9Hydraulic AreaPage 20 PT-1930 Performer Illustrated Parts Manual 9/951Common to many Gilbarco pumps and dispensers.15 Flexible Shaft K89799-24 - 116 Cable Stablizer Assembly T19551-G1 - 117 Nyliner bearings K80567-31 - 318 Coupling K93404 - 119 Totalizer 7-Figure (Metric) N23712-G2 - 1Totalizer 7-Figure (U.S. Gallons) N23712-G1 - 120 Stabilizer Bracket Assembly R20203 - 121 Hex Screw K85736-07 - 122 Totalizer and Bracket Assembly R20285-01 N21013 123 Oilite Bearing N17706-37 - 124 Pulser Assembly T18350-G1 - 125 Screw #10-32 x 3/8 Q11769-59 - 126 Bracket R17466-01 - 1# PartDescriptionCurrent Part NumberPrevious Part NumberQty.PT-1930 Performer Illustrated Parts Manual 9/95 Page 21Hydraulic AreaPlate 12 Sump Area All PumpsQuantity shown per assembly1Common to all Gilbarco pumps.2Also used on The Advantage and Dimension Series pumps.# PartDescriptionCurrent Part NumberPrevious Part NumberQty.1 Vent Fitting 1N21861-02 - 12 Hex Nut 9/16-24 1Q10985-02 - 13 Ferrule 3/8 1K43260 - 24 Nut 3/8 1Q12505-01 - 25 Vent Tube R20084 - 16 Straight Fitting 3/8 Q12504-01 - 17 Sump Bracket R20070 - 18 Bolt K44046 - 19 Sump 2PA0013-165 - 110 Elbow 2Q10001-20 - 111 Elbow 2Q10001-12 - 112 Return Tube T19314-G1 - 113 Inlet Tube T19315-G1 - 12357810111214691343Hydraulic AreaPage 22 PT-1930 Performer Illustrated Parts Manual 9/95Plate 13 Pump and Motor Area All PumpsQuantity shown per pump and motor.2, 3, 457910121314151681116181117PT-1930 Performer Illustrated Parts Manual 9/95 Page 23Hydraulic AreaPump and Motor Area All Pumps, Continued1Common to many of Gilbarco pumps.2Order Entry, Customer specific item.# PartDescriptionCurrent Part NumberPrevious Part NumberQty.1 Nut 1Q11890-05 - 22 Motor 3/4HP 1110/220VAC, 50Hz, 1 phase, continuous run 1R14213-22 - 1115/230VAC, 50Hz, 1 phase, continuous run 1R14213-05 - 1110/220VAC, 60Hz, 1 phase, continuous run 1R14213-24 - 1110/220VAC, 60Hz, 1 phase, continuous run 1R14213-03 - 1380VAC, 50/60Hz, 3 phase, continuous run 1R14213-14 - 13 Motor 1/2HP 1110/220VAC, 60Hz, 1 phase, continuous run 1R14213-23 - 1115/230VAC, 50Hz, 1 phase, continuous run 1R14213-02 - 1115/230VAC, 60Hz, 1 phase, continuous run 1R14213-01 - 1220/380VAC, 50Hz, 3 phase, continuous run 1R14213-19 - 14 Motor 1/3HP 1115/220VAC, 50Hz, 1 phase 1R14212-03 - 1115/220VAC, 50Hz, 1 phase, continuous run 1R14212-12 - 1115/220VAC, 60Hz, 1 phase 1R14212-02 - 1115/220VAC, 60Hz, 1 phase, continuous run 1R14212-11 - 1220/380VAC, 50/60Hz, 3 phase 1R14212-04 - 15 Motor Pulley 1Pulley 500RPM 60Hz 1R18900-21 - 1Pulley 500RPM 50Hz 1R18900-40 - 1Pulley 650RPM 60Hz 1R18900-27 - 1Pulley 650RPM 50Hz 1R18900-32 - 1Pulley 800RPM 50Hz R18900-39 - 1Pulley 800RPM 60Hz R18900-32 - 16 Bolt 1K46809 - 37 Lock Washer 1K20455 - 38 Shockmount R20069 - 29 Pulley Belt 1Belt 30 -1/2, 500RPM 60Hz 1R06711-47 - 1Belt 30 -1/2, 500RPM 50Hz 1R06711-40 - 1Belt 31, 650RPM 60Hz R06711-38 - 1Belt 31-1/2, 650RPM 50Hz 1R06711-42 - 1Belt 31-1/2, 800RPM 60Hz R06711-42 - 1Belt 32-1/2, 800RPM 50Hz R06711-30 - 110 Bolt 1K01904 - 111 Flat Washer 1K66314 - 112 Idler Pulley 1N18366-02 - 113 Nut 1K01943 - 114 PUS Pump 1, 2See Plate 20 - 115 Elbow 90 1Q13044-01 - 116 Pulley , without Hand Drive 1R18900-69 - 116a Pulley, with Hand Drive 1N23596 - 117 Key K83379-21 - 118 Key 1Q12697-01 - 119 Lock Washer 1K50775 - 1Hydraulic AreaPage 24 PT-1930 Performer Illustrated Parts Manual 9/95Plate 14 PUS020 Pump and Air Separator All Pumps# PartDescriptionCurrent Part NumberPrevious Part NumberQty.1 Air Separator Body (1 Discharge) 1R12512-03 - 12 Filter Retainer (Inner) 1K82085-02 - 13 Separator Filter 1K76193 - 14 Filter Retainer (Outer) 1K82085-01 - 15 Seal Kit (includes 5a-e) 1K35211 - 15a O-Ring 1-3/4 x 2 x 1/8 1Q10068-15 - 15b O-Ring 2-1/8 x 2-3/8 x 1/8 1Q10068-18 - 15c Separator Gasket 1N14492 - 15d Pump Gasket 1Q12508-156 - 15e Lip Seal 1K82472 - 16 Pump Body Assembly 1W02213-G17 - 17 Blade Spacer 1K48226 - 18 Blade 1K76657 - 6Blade Kit (includes 6, 5d, 5e) 1K35212 - 1235c791817161482021232225245d75e5a5b1461311,1226101915PT-1930 Performer Illustrated Parts Manual 9/95 Page 25Hydraulic Area1Common to all Gilbarco pumps that use the PUS Pump.9 Rotor and Shaft Assembly 1N17150-21 - 110 Screw #10-24 x 3/8 Q11560-105 - 311 Bolt 3/8-18 x 1 1K01902 - 612 Lockwasher 3/8 1K50775 - 613 Pump Head Assembly 1T16604-G1 - 114 Flange 1-1/2 R18898-G2 - 115 Gasket K93124 - 116 Flexible Suction Assembly K91324-01 - 117Union 1-1/2 1(150#) K12179 - 1Union 1-1/2 (300#) Q10846-08 - as req.18 Pipe Nipple 1-1/2 x 1-3/4 1R11493-50 - 119 Filter 1N18957 - 120 Filter Cap 1K45315-03 - 121 Relief Valve Cap 1K48169-04 - 122 Relief Valve 1N23190 - 123 Relief Valve Spring 1 (Standard and Econo flows) K93829 - 1Spacer Preload (Standard Flow) K93530-02 - 2Spring By-Pass Valve (High Flow) Q13235-01 - 124 Elbow 1/2 x 90 1Q10001-20 - 125 Vent Tube Assembly1K93520 - 126 Bolt 5/16-18 x 7/8 1Q10865-01 - 1027 Taper Pin #6 x 1-1/4 (not shown) K41874 - 228a Standard FlowPump and Air Separator Assembly with Flange (150#) PUS020-G478 - 1Pump and Air Separator Assembly with Flange (3-Bolt) PUS020-G480 - 128b High FlowPump and Air Separator Assembly with Flange (150#) PUS020-G481 - 1Pump and Air Separator Assembly with Flange (3-Bolt) PUS020-G483 - 128c Econo FlowPump and Air Separator Assembly with Flange (150 #) PUS020-G484 - 1Pump and Air Separator Assembly with Flange (3-Bolt) PUS020-G486 - 129 Key (not shown) 1K83779-21 - 1# PartDescriptionCurrent Part NumberPrevious Part NumberQty.Hydraulic AreaPage 26 PT-1930 Performer Illustrated Parts Manual 9/95Plate 15 Hand Drive 16151413121110987654321PT-1930 Performer Illustrated Parts Manual 9/95 Page 27Hydraulic Area1Also used on Trimline Series 27 frame pumps with hand drive.# PartDescriptionCurrent Part NumberPrevious Part NumberQty.1 Nut Q11890-05 - 42 Hanger Bracket T19325-01 - 13 Support Bracket R20092-01 - 14 Hub Bracket N23569-G1 - 15 Flat Washer K02205 - 26 Bolt K85736-43 - 67 Belt R06711-60 - 18 Spacer Hand Drive N23570 - 19 Hand Drive Pulley (small) K78492-21 - 110 Bolt Q11098-10 - 211 Crank Assembly 1N18539 - 112 Stud 1K85561 - 113 Hand Drive Pulley (large) 1R12553-01 - 114 Grease Fitting 1K76145-21 - 115 Set Screw 1K18719 - 116 Clinch Stud 15/16-18 K83677-20 - as req.Hydraulic AreaPage 28 PT-1930 Performer Illustrated Parts Manual 9/95