Medium Voltage Distribution Evolis circuit breakers 17.5 kV 17.5KV-2010.pdf · 2018-06-23 · General presentation Evolis Circuit breakers adapted to your needs (*) The Evolis 24

Medium Voltage Distribution

Evolis circuit breakers 17.5 kV vacuum breakingfi xed and withdrawable versions

Catalogue2010

1AMTED307010EN.indd

General contentsEvolis circuit breaker17,5 kV

General presentation 2

Panorama 8

Evolis 17.5 kV fi xed version 11

Evolis 17.5 kVwithdrawable versionin NEX cradle

31

Evolis 17.5 kV withdrawable versionin MC cassette

53

Evolis HP withdrawable versionin MC cassette

73

2 AMTED307010EN.indd

Evolis: a range of circuit breakers that takes account of your electrical installations’ requirements today and in the future.

DescriptionEvolis: a range of vacuum-type circuit breakers from 7.2 kV to 24 kV, combining easy selection and a comprehensive offer:

a fixed, frontal or lateral versiona withdrawable, frontal version with a circuit breaker and its cradle or its cassettea fixed, lateral version equipped with an integrated protection chainseparately delivered accessories.

The Evolis circuit breaker is operated via a spring mechanism that gives an operating speed that is independent of the operator and that does not require an auxiliary power supply.When the operating mechanism is motorized the circuit breaker can include telecontrol functions and carry out rapid reclosing cycles.The various circuit breaker versions are easy to integrate in a cubicle environment. An Installation Guide details the required procedure.

ApplicationsEvolis is intended for use in medium voltage network applications, in new installations or renovation, for utilities companies, infrastructures, the process industry and the tertiary sector.It provides protection for all types of applications: cables, overhead lines, motors, capacitors, transformers, source busbar sections, etc.

Evolis, a fixed, frontal or lateral versionHere the circuit breaker is in its simplest version. In this case it can be combined with additional accessories to meet various requirements.For the fixed lateral version, the MV connection can be on the rightor on the left depending on the type of circuit breaker.

PE

5808

3

PE

5808

4

Evolis 17.5 kV fixed, frontal version Evolis 24 kV fixed, frontal version (*)

PE

5808

5

PE

5808

6

Evolis 24 kV fixed, lateral versionMV connection on the left hand side (*)

Evolis 24 kV fixed, lateral versionMV connection on the right hand side (*)

bbbb

General presentation EvolisCircuit breakers adapted to your needs

(*) The Evolis 24 kV offer is covered in a separate catalog (ref. AMTED307011EN).

3AMTED307010EN.indd

Evolis: a withdrawable, frontal versionIn this version, the circuit breaker is equipped with arms, clusters, a rack, and cradle or cassette. The cradle and the circuit breaker can be ordered and delivered separately.

PE

5799

4

PE

5800

1

Evolis 17.5 kV withdrawable, frontal versionin NEX cradle

Evolis 24 kV withdrawable, frontal version in NEX cradle (*)

PE

5654

5

PE

5808

9

Evolis HP withdrawable, frontal versionin MC cassette

Evolis 17.5 kV withdrawable, frontal versionin MC cassette

EVOset: a fixed, lateral version equipped with an integrated protection chainThe EVOset is provided with a fully autonomous integrated protection chain (with a VIP type control unit) operating without an auxiliary power source. The protection unit exists in 4 models: VIP30, VIP35, VIP300P and VIP300LL. VIP protection units are associated with functional current sensors. The circuit breaker is delivered with its factory-tested protection chain. It therefore simplifies the panel builder’s installation work.

PE

5809

0

EVOset 24 kV fixed, lateral versionMV connection on the right hand side (*)

General presentation EvolisCircuit breakers adapted to your needs (cont.)

(*) The Evolis 24 kV offer is covered in a separate catalog (ref. AMTED307011EN).


General presentation EvolisThe very best of vacuum technology

As a specialist in breaking technologies, Schneider Electric took naturally an interest in vacuum breaking techniques.A major R&D investment was made to develop and engineer Evolis, providing customers with the very best of vacuum technology.

Make-up of a vacuum interrupterVacuum interrupters basically have two electrical contacts (fig.1), one fixed and the other mobile, and a sealed enclosure. The latter enables a high level of vacuum to be maintained inside the interrupter (less than 10-2 Pa) to provide insulation between the open contacts.The dielectric strength of the vacuum allows the contact-to-contact distance to be reduced. This short distance together with the low opening speed allow the use of a low energy control mechanism. A metal clusters provides the link between the mobile contact and the enclosure.In order to keep the vacuum level required for the correct operation of the interrupter for 30 years, the enclosure must be perfectly sealed, and the various components have to be fully degased. This is achieved by:

choosing materials that are specifically selected for this application (metals and ceramics)

choosing an appropriate assembly process (vacuum, high temperature brazing)the use of a “getter” material to absorb the residual gas.

Current breaking in a vacuum interrupterIn vacuum breaking, the electrical arc generated on separation of the contacts is made up of a plasma of metal vapors produced by the vaporization of the contact material.At low values of current, these vapors very quickly condense on the shield and contacts when the arc disappears, thus allowing:

the vacuum to be re-establisheda contact-to-contact dielectric strength to be restored that is greater than the recovery voltage: breaking is then complete.

At high currents, the electrical arc in the vacuum switches to a concentrated mode which causes high, localized temperature rises on the contacts. The existence of these hot spots is detrimental to the quick restoring of the dielectric strength.Two techniques can be used in order to avoid this stagnation of the static concentrated arc:

the so called RMF (Radial Magnetic Field) technique, involves rotating the arc thanks to an electromagnetic effect generated by a radial magnetic field; this therefore limits contact erosion.

a more recent technique called AMF (Axial Magnetic Field) involves applying an axial magnetic field parallel to the axis of the two contacts (fig. 2) which allows a diffuse arc to be maintained (fig. 3) even at high current values. The arc energy is spread over the whole contact surface area, therefore causing very low levels of erosion.

Schneider Electric has chosen this last technique for the Evolis range.

b

bb

bbb

b

b

b

PE

6004

2

Fig. 3: diffuse vacuum arc AMF technology

DE

6016

3

Fig. 1: vacuum interrupter components

Ceramic chamber

Fixed contactShield

Mobile contact

Metal bellows

DE

6016

4

Fig. 2: cross-section of AMF contact

Electrode

Current

AMF coilContact diskArc plasma

Axial magnetic field

5AMTED307010EN.indd

General presentation EvolisThe very best of vacuum technology (cont.)

Schneider Electric’s choices for Evolis combined with its industrial expertise provides customer with a highly reliable range of circuit breakers. These products are suitable for the most demanding conditions with the guarantee of full compliance with international standards.

AMF technologyEvolis circuit breakers use AMF type vacuum interrupters. According to technical and economic optimization considerations, the axial magnetic field is generated:

either by a coil outside of the interrupter (fig. 4), for rated voltages up to 17.5 kVor by a coil integrated in the interrupter contact structure (fig. 5), for the 24 kV

voltage level.In both cases the AMF vacuum interrupters feature low arc voltages (Uarc of around 50 V) and maximum usage of the contact surface for very low contact erosion.

The advantages providedThe above choices provide customers with the following advantages in MV circuit breaker applications:

simple and compact vacuum interruptershigh electrical endurance meaning that there is no need for contact wear

inspection in normal network protection applications including highly disturbed overhead line feeders.

bb

bb

2001

10

Fig. 4: 17.5 kV external coil type interrupter

DE

6016

2

Fig. 5: 24 kV internal coil type interrupter


General presentation EvolisThe very best of vacuum technology (cont.)

PE

5569

4

Vacuum interrupter

Systematic advanced controlThe main components of the circuit breaker, such as vacuum interrupter and operating mechanism, are produced by Schneider Electric. The vacuum interrupters are manufactured in an ultra-modern production unit in France.During manufacture, each circuit breaker is subjected to systematic advanced testing.Vacuum interrupter testingThe level of vacuum in each interrupter is tested using the “magnetron discharge method”.Using this sophisticated procedure, measurement is very precise and does not require access to the inside of the interrupter, thus not affecting the airtight seal.Circuit breaker testingA rigorous set of tests and measurements is carried out on each circuit breaker.The results are reported and signed off by the quality control department on each device’s test certificate to ensure product traceability.

Compliance with standardsEvolis complies with IEC 62271-100. Design and production are certified to ISO 9001: 2000.Production sites are certified to ISO 14001 (environmental standard).

DE

5574

5

DE

5574

6

CertificationThe certificate of conformity provides guarantees that the circuit breaker:

has been subject to type tests according to EN 45001 standards procedures in accredited laboratories by independent organizations

is in conformity with recognized international standards.

Evolis is currently being certified by external EN 45011 accredited organizations, members of the STL (Short circuit Testing Liaison):

EN 45001: general requirements for the competence of testing and calibration laboratories

EN 45011: general requirements for bodies of operating product certification systems.

Environmental careProduct design takes account of the environmental constraints described in a “Product Environment Profile” dossier (PEP).

An end-of-service-life manual details procedures for dismantling and processing components.

b

b

b

b

b

b

b

PE

5569

5

Industrial process expertise

7AMTED307010EN.indd

General presentation EvolisExtended products offer

Circuit breakerb cradle

Instrumenttransformer

MV cubicle componentsb capacitor insulatorb earthing switchb heating resistorb voltage presence indicatorb crankb extraction table

LV cubiclecomponentsb Mcbb protection relayb lampb push buttonb terminal blocks connector

Protection and controlb UMI

Meteringb VPISb PM700 or PM800

PE

5808

2


Circuit breakers

Evolis from 7.2 kV to 17.5 kV

Ur=12kV

Up=75kV

Ir=630A

Isc=25kA tK=4s

Ud=42kV (50Hz 1min)

Seq=O-0,3s-CO-15s-CO

IEC 62271-100 Ed 1.1 20003-05

GB 1984

DL/T 402

N°:

fr=50Hz

Evolis

Ur=12kV

Up=75kV

Ir=630A

Isc=25kA tK=4s

Ud=42kV (50Hz 1min)


IEC 62271-100 Ed 1.1 20003-05

GB 1984

DL/T 402

N°:

fr=50Hz

Evolis

Fixed versionOperating mechanism on the front

Withdrawable versionin NEX cradleOperating mechanism on the front

Withdrawable versionin MC cassetteOperating mechanism on the front

Withdrawable HP versionin MC cassetteOperating mechanism on the front

Rated voltage Ur (kV, 50/60 Hz)

Short circuit rated breaking capacity (Isc)from 25 to 40 kA from 25 to 40 kA from 25 to 40 kA from 25 to 50 kA

Rated current (Ir)from 630 to 2500 A from 630 to 2500 A from 630 to 2500 A from 1250 to 3150 A

Panorama Evolis circuit breakers

9AMTED307010EN.indd

Panorama Evolis circuit breakers (cont.)

Evolis 24 kV EVOset 24 kV

Ur = 24 kV

Up = 75kV

Ir = 630A

Isc = 25kA tK=4s

Ud = 42kV (50Hz 1min)

Seq = O-0,3s-CO-15s-CO

IEC 62271-100 Ed 1.1 20003-05

GB 1984

DL/T 402

fr = 50Hz

Ur = 24 kV

Up = 75kV

Ir = 630A

Isc = 25kA tK=4s

Ud = 42kV (50Hz 1min)

Seq = O-0,3s-CO-15s-CO

IEC 62271-100 Ed 1.1 20003-05

GB 1984

DL/T 402

fr = 50Hz

Fixed versionOperating mechanism on the front

Withdrawable versionOperating mechanism on the front

Fixed versionOperating mechanism on the side

Fixed versionIntegrated protection systemOperating mechanism on the side

Rated voltage Ur (kV, 50/60 Hz)

Short circuit rated breaking capacity (Isc)from 16 to 31.5 kA from 16 to 31.5 kA from 12.5 to 25 kA from 12.5 to 20 kA

Rated current (Ir)from 630 to 2500 A from 630 to 2500 A 630 and 1250 A 630 and 1250 A

Separate catalogue


Protection, monitoring and control

Protection Protectionand control

Metering

Sepam

I1 = 165A RMS

I2 = 166A RMS

I3 = 167A RMS

onext

1 > 51 1o > 511 > >51 1o > >510 off I on Trip

VIP30for phase protection

VIP35for phase and earthing protection

VIP300Pfor phase protection

VIP300LLfor phase and earthing protection

Sepam series 20for normal applications

Sepam series 40for demanding applications

Sepam series 80for full applications

PM700for basic metering

PM800for advanced metering

CM3000, CM4000for full meteringand power quality

Separate catalogue

Panorama Evolis circuit breakers (cont.)

11AMTED307010EN.indd

Presentation 13Main characteristics 14Description of functions 16MV connection 16LV connection 18P2 stored energy operating mechanism 19Wiring diagram 19Opening circuit 20Remote control 22Indication 23Locking/interlocking 24

Dimensions 25Order form 26Offer structure 27Separated components 27

Services 29

Evolis 17.5 kV fi xed version

Contents




Presentation

Description of the deviceThe Evolis circuit breaker comprises a basic fixed version:

3 poles integrated in a “sealed pressure system” type insulating enclosure. a P2 type, spring-operated stored energy control mechanism, electrifiable.

This gives the device an opening and closing speed that is independent of the operator, for both electrical and manual orders. It enables reclosing cycles to be carried out

a front panel housing the manual operating mechanism and status indicatorsupstream and downstream terminals for the power circuit connectiona terminal block for connection of external auxiliary circuits.

Each device can also be fitted with the following options:a supporting frame equipped with rollers and ground fixing brackets for fixed

installationcircuit breaker locking in the open position by a keylock installed on the front plate

of the operating mechanisma 18-pin or 42-pin Harting type LV connector.

Applications Evolis circuit breakers are three-pole indoor MV circuit breakers. They are mainly used for operation and protection of public, industrial and tertiary distribution networks from 7.2 to 17.5 kV. Through their compact dimensions and harmonized range, Evolis circuit breakers are positioned very favorably on the retrofit market.

bb

bbb

b

b

b

Evolis circuit breaker 17.5 kV fixed version

PE

5808

3


Electrical characteristics according to IEC 62271-100Phase to phase mm 145

Rated voltage Ur kV 50/60 Hz 7.2 12Insulation level- power frequency withstand Ud kV 50 Hz 1 min (*) 20 28- lightning impulse withstand Up kV peak 60 75Rated current Ir A 630 b b b b

1250 b b b b

1600 – – – –2500 – – – –

Short circuit current Isc kA 25 31.5 25 31.5Short time withstand current Ik/tk kA/3 s 25 31.5 25 31.5Short-circuit making current Ip kA peak 50 Hz 63 79 63 79

60 Hz 65 82 65 82


Main characteristics

Common characteristics according to IEC 62271-100Rated switching sequence O-3 min-CO-3 min-CO b

O-0.3 s-CO-3 min-CO b

O-0.3 s-CO-15 s-CO b

Operating times Opening < 50 msBreaking < 60 msClosing < 65 ms

Service temperature T °C – 25 to + 40Mechanical endurance Class M2

Number of switching operations 10 000Electrical endurance Class E2Number of switching operations at full Isc value

25 kA 10031.5 kA 5040 kA 30

Capacitive current breaking capacity Class C1Average relative humidity Over 24 h < 95%

Over 1 month < 90%

Switching and protection of capacitor banksEvolis range circuit breakers are well suited for switching and protection of capacitor banks with installed power up to 2 Mvar installed in series with dampening reactor limiting inrush current to 2 kA. Evolis is also well suited for capacitor banks system with installed power higher than 2 Mvar in conjunction with anti-harmonic filtering system. Please consult us.

PE

5808

3



Main characteristics (cont.)

185 2407.2 12 17.5 7.2 12 17.5

20 28 38 20 28 3860 75 95 60 75 95b b b b b b b b – – b – – b – – b

b b b b b b b b – – b – – b – – b

b b b b b b – – – – – – – – – – –– – – – – – – – b b b b b b b b b

25 31.5 40 25 31.5 40 25 31.5 25 31.5 40 25 31.5 40 25 31.5 4025 31.5 40 25 31.5 40 25 31.5 25 31.5 40 25 31.5 40 25 31.5 4063 79 100 63 79 100 63 79 63 79 100 63 79 100 63 79 10065 82 104 65 82 104 65 82 65 82 104 65 82 104 65 82 104

(*) Circuit breaker tested at Ud 42 kV 50 Hz, 1 minb Available– Not available.


CompositionThe basic circuit breaker is equipped with drilled copper connection terminals, at the top and bottom of the breaking units.The connectors are fitted to the terminals using the corresponding bolts.Several variants are possible.

Fixed connectorsHorizontal connectors (H) Vertical connectors (V) Mixed connectors

DE

5751

2

DE

5751

3

DE

5751

4

An adjustable connector enables the vertical distance to be increased to enable rotation of 90°.

Adjustable gap connectorsExtendable connectors horizontal (H)

Extendable connectors vertical (V)

DE

5751

6

DE

5751

7

An adjustable connector enables the connection distance to be increased from 0 to 25 mm.

Mixed solutionExample

DE

5751

8

Comment:The insulation withstand values given in the performance table, do not take account of the connectors.With these connectors it is possible to use unplated or tin-plated copper conductorsor tin-plated aluminium conductors, without any specific precautions being required.The shape and dimensions of these conductors must be determined by the panel builder according to the dielectric withstand and temperature rise characteristics of the whole connection system. Typical examples are provided in the Installation Guide.

DE

5751

0D

E57

511

Connection terminal

3 connector sets


Description of functionsMV connection



Description of functionsMV connection (cont.)

DE

5751

9

Clusters and fingers

Arms and bushings

Arms, clusters, fingers and bushings, busbarsand field deflectors

DE

5752

0D

E57

521

CompositionPanels builders with own cubicle designs (including the racking truck) can transform a fixed device into a withdrawable device by adding the following assemblies:

armsclustersfingersbushingsfield deflectors.

Cluster and fingerThe tulip type cluster has a shape which provides maximum contact surface whilst

optimising heat dissipation. Moreover, in the case of short-circuit, it offers good compensation characteristics for electrodynamic forces.

The finger is a component designed specifically for the cluster, regarding its shape, tolerances and materials. Contact between the finger and the cluster is guaranteed by type testing: 1000 racking in-out operations.

Arm and bushingThe arms cylindrical shape optimizes dielectric strength and avoids the need

for any additional insulation.The bushing’s cylindrical shape gives it outstanding dielectric strength.The previously described connectors can be mounted on bushing connection

terminals.Comment:Performance levels of the whole assembled unit must be tested by the panel builder.Installation conditions for the two units presented above are described in the Installation Guide.For the 17.5 kV withdrawable circuit breaker, phase to phase distance 185 mm, field deflectors must be added to the bushings.

Field deflectorsFor circuit breakers with a rated voltage of Ur = 17.5 kV with a phase to phase distance of 185 mm, field deflectors are used to increase the dielectric strength by 75 kV to 95 kV.

bbbbb

b

b

b

b

b



Description of functionsLV connection

Two connection solutionsDirectly on the LV terminal block

The circuit breaker’s LV wiring can be directly connected to the LV terminal block of the operating mechanism through a cable protection duct.

With LV plugThe fixed part (male) mounted on the circuit breaker and fully connected to

the operating mechanism The mobile part (female) compatible with the male part.

Two versions of the LV plug are availableAn 18-pin version, enabling connection of:

a shunt opening release MX1a remote control mechanism (electrical motor, shunt closing release XF,

anti-pumping relay)a “ready to close” contact PFa maximum number of 4 auxiliary contacts.

(see “indication” page, “Open/closed position auxiliary contacts” chapter).

An 24-pin version, enabling connection of:an opening release (shunt type MX1 or undervoltage type MN)a second opening release (shunt type MX2 or undervoltage type MN)a low energy release (Mitop)a fault trip indicator contact SDEa remote contact reset system SDEa remote control mechanism (electrical motor, shunt closing release XF)a “ready to close” contact PFa maximum number of 11 auxiliary contacts.

(see “indication” page, “Open/closed position auxiliary contacts” chapter).Note: see the table of the releases’ combinations “Order form” page.

LV wiring kitA wiring kit with 21 or 42 wires (2 meters long) equipped with pins that can be adapted to the LV plug can be supplied for connected in to the cubicle’s LV compartment.

Flexible ductingThis 525 mm long duct with a hinged LV plug, enables protection of the LV wiring that connects the circuit breaker to the cubicle’s LV compartment.

Interlocking kitFor circuit breakers intended for withdrawable applications, an interlocking kit can be adapted. The kit enables the mechanical position status to be given (“connected/disconnected”) of the LV plug. By adding a link between this mechanical data (by the customer) and the open/closed position of the circuit breaker, interlocking can be achieved between the LV plug and the open/closed position of the circuit breaker (required by IEC standard 62271-200).A detailed explanation of operation is given in the Installation Guide.

b

bv

v

bb

bb

bbbbbbbb

DE

5752

2D

E57

523

DE

5752

4

LV terminal block

18-pin version LV plug



Operation of the P2 stored energy operating mechanismThis gives the device an opening and closing speed that is independent of the operator whether the order is electrical or manual.The electrical control mechanism carries out reclosing cycles and is automatically recharged by a geared motor each time after closing. It consists of:

the stored energy operating mechanism which stores in springs the energy required to open and close the device

a gear motor electrical charging device with manual charging by lever(useful on loss of auxiliary supply)

manual order devices by push buttons on the front panel of the device an electrical remote closing device containing a release with an antipumping relayan electrical opening device containing one or more releases, for example:shunt openingundervoltageMitop, a low consumption release, used only with the Sepam 100 LA

protection relay.an operation counter a position indication device by mechanical indicator

and 3 modules of 4 auxiliary contacts whose availability varies according to the diagram used

a device for indicating “charged” operating mechanism status by mechanical indicator and electrical contact.

Wiring diagram (principle)

b

b

bbbvvv

bb

b

PE

5660

0


Description of functionsP2 stored energy operating mechanismWiring diagram

DE

5940

8EN

Fault Ready to close

Auxiliary contacts

Circuit breaker openOperating mechanism loaded

Remote control

OF24OF23OF22OF21OF14OF13OF12OF11OF4OF3OF2OF1

SDE

or

PF

XF

MX1

MX2

MN

Mitop Reset

Charged

MCH


Circuit breaker equipped with a shunt opening release MX

Shunt opening release (MX1 and MX2)


Description of functionsOpening circuit

CompositionThe opening circuit is produced using the following components:

a shunt opening release (MX1)a second shunt opening release (MX2)undervoltage release (MN)time delayed undervoltage release (MNR: MN + time delay).

The time delay, placed outside the circuit breaker, can be disabled by an emergency stop button to give instant circuit breaker opening.

low energy release (Mitop).Note: see the table of the releases’ combinations on the following page.

Shunt opening release (MX1 and MX2)Energizing this release causes instant opening of the circuit breaker.Permanent power supply to the MX unit locks the circuit breaker in the “open” position.

CharacteristicsPower supply See “Order form” pageThreshold 0.7 to 1.1 UrConsumption (VA or W) Triggering 200 (for 200 ms)

Latched 4.5

bbbb

b

DE

5808

1D

E58

082


Undervoltage release (MN)

Time delay for undervoltage release (MN)

Low energy release (Mitop)


Description of functionsOpening circuit (cont.)

Undervoltage release (MN)This release unit causes the systematic opening of the circuit breaker when itssupply voltage drops below a value less than 35% of the rated voltage, even if thisdrop is slow and gradual. It can open the circuit breaker between 35% and 70% ofits rated voltage. If the release unit is not supplied power, manual or electrical closingof the circuit breaker is impossible. Closing of the circuit breaker is possible whenthe supply voltage of the release unit reaches 85% of its rated voltage.

CharacteristicsPower supply See “Order form” pageThreshold Opening 0.35 to 0.7 Ur

Closing 0.85 UrConsumption (VA or W) Triggering 200 (for 200 ms)

Latched 4.5

Time delay for MNTo eliminate spurious tripping of the circuit breaker when there are brief voltage drops, the MN action is controlled with a time delay. This function is achieved by adding a time delay unit outside of the undervoltage release (MN) circuit (adjustable time delay).This unit is placed outside the circuit breaker and can be inhibited by an emergency stop button to obtain instant circuit breaker opening.



Latched 4.5Time delay 0.5 s - 0.9 s - 1.5 s - 3 s

Low energy release (Mitop)This release includes a low consumption unit and is specifically used with the Sepam 100LA self-powered unit (“REFLEX MODULE”), or the VIP relay.

CharacteristicsPower supply Direct currentThreshold 0.6 A < I < 3 A

Any tripping due to the Mitop release unit is momentarily indicated by an SDE type changeover contact, provided with the Mitop. This release also includes a coil (reset) enabling remote SDE contact reset.Comment:Use of the Mitop low energy release requires adjustment of the protection relay time delay in order to ensure that the circuit breaker trips between 45-50 ms.

Releases combinations tableShunt opening MX1 1 1 1 1 1 1Shunt opening MX2 1 1Undervoltage MN 1 1 1 1Mitop 1 1 1 1 1

DE

5808

2D

E58

083

DE

5808

4


Circuit breaker equipped with remote control

Electrical motor MCH


Description of functionsRemote control

Shunt closing release XF

FunctionRemote control enables the remote opening and closing of the circuit breaker. The opening order always takes priority over the closing order.In the event of simultaneous opening and closing orders, the mechanism discharges under no load, without moving the main contacts. The circuit breaker remains in the “open” position.In the event of latched opening and closing orders, the mechanism carries out anti-pumping function as standard, by blocking the circuit breaker in the “open” position. Anti-pumping function: after opening on a fault or deliberate opening via the manual or electrical mechanism, the closing order must be interrupted then reactivated to enable reclosing of the circuit breaker.

CompositionThe remote control comprises:

an electrical motor (MCH) equipped with a “spring armed” CH limit switcha shunt closing release (XF).

Electrical motor (MCH)The electrical motor carries out the automatic rearming of the storage energy springs as soon as the circuit breaker closes. This allows instant reclosing of the device after opening. The arming lever is only used as a backup control in the case of the absence of the auxiliary power supply. An electrical motor (MCH) equipped with a “spring armed” CH limit switch.This contact indicates the “armed” position of the mechanism (springs armed).

CharacteristicsPower supply See “Order form” pageThreshold 0.85 to 1.1 UrConsumption (VA or W) 180 Motor overcurrent 2 to 3 In for 0.1 sArming time 6 s maximumOperating rate 3 cycles maximum per minuteCH contact 10 A/240 V

Shunt closing release (XF)This release allows remote closing of the circuit breaker when the control mechanism is armed. It can be permanently or briefly supplied power.

Characteristics XFPower supply See “Order form” pageThreshold XF 0.85 to 1.1 UrConsumption (VA or W) Triggering 200 (for 200 ms)

Latched 4.5

bb

DE

5808

5D

E58

086

DE

5808

2



Description of functionsIndication

Rotary type contacts (OC)

“Ready to close” PF contact

Operation counter (CDM)

“Open/closed” auxiliary position contacts (OC)These auxiliary contacts indicate the “open” or “closed” position of the circuit breaker.

Rotary type changeover contacts directly controlled by the circuit breaker mechanism.

Indicator contacts are proposed:for standard relaying applicationsfor low level control applications with plc’s or electronic circuits.

This version is compatible with Sepam series 20-40-80 units.CharacteristicsStandard delivery 4Maximum quantity 12Breaking capacity (A) Standard Min. load: 100 mA/24 VCos ϕ: 0.3 V AC 240/380 10/6 *CA12/DC12 480 10/6 *

690 6V DC 24/48 10/6 *

125 10/6 *250 3

Low level Min. load: 2 mA/15 V DCV AC 24/48 6

240 6380 3

V DC 24/48 6125 6250 3

* Standard contacts: 10 A; optional contacts: 6 A (temperature derating)

“Ready to close” PF contactThe circuit breaker is “ready to close” when shown by a mechanical indicator and a PF changeover contact. This information simultaneously indicates that:

the circuit breaker is openthe storage energy springs are armedthere is no permanent closing orderthere is no permanent opening order caused by:a safety opening order (2nd MX or MN)keylocking of the device in the open position.

CharacteristicsStandard delivery 0Maximum quantity 1Breaking capacity (A) Standard Min. load: 100 mA/24 VCos ϕ: 0.3 V AC 240/380 5CA12/DC12 480 5

690 3V DC 24/48 3

125 0.3250 0.15


240 3380 3

V DC 24/48 3125 0.3250 0.15

Operation counter (CDM)The operation counter is visible on the front panel. It totalizes the number of switching cycles (CO) that the device has carried out.

b

bvv

bbbbvv

DE

5808

7D

E58

088

DE

5808

9



Description of functionsLocking/interlocking

DE

5753

5D

E57

536

Padlocking of the circuit breaker in the “open” position

DE

5753

7

Keylocking of the circuit breaker in the “open” position

��N��

Push button padlockThis transparent screen blocks access to the opening and closing push-buttonson the circuit breaker.The device enables the opening or closing push button to be locked independently. It is often associated with an electrical motor (MCH).Locking is achieved either:

by 2 screwsby 3 padlocks, not suppliedby a lead seal.

DE

5753

8

DE

5753

9

Padlocking Lead sealing

Locking of the circuit breaker in the “open” positionThe circuit breaker is locked in the “open” position by blocking the opening push button in the engaged position:

by a padlock 1 to 3 padlocks, not suppliedby a keylocks 1 or 2 different keylocks, not supplied

The keylocks are of captive key type, with the key free after locking, either Profaluxor Ronis (right turn), and are proposed according to the options either with:

1 single keylock1 single keylock mounted on the circuit breaker + 1 identical delivered separately

for interlocking with another device2 different keylocks for double locking.

Profalux and Ronis keylocks are inter-compatible.

bbb

bb

bb

b

Push button padlock

DE

5941

7

Ur=12kV

Up=75kV

Ir=630A

Isc=25kA tK=4s

Ud=42kV (50Hz 1min)


IEC 62271-100 Ed 1.1 20003-05

GB 1984

DL/T 402

N°:

fr=50Hz

Evolis

Locking the circuit breaker in the open position

Opening button

Closing button

Control mechanism status (charged or discharged)

Push button padlock

Circuit breaker position indicator

Operation counter



Dimensions

DevicePhase to phase distance 145 mm

DE

5754

0

145

470

535

145 �0

DE

5755

2

Ur Isc Ir Weight7.2 kV 25 kA 630 A 51 kg

1250 A31.5 kA 630 A

1250 A12 kV 25 kA 630 A

1250 A 31.5 kA 630 A

1250 A

Phase to phase distance 185 mmD

E57

541

1�5

550

535

1�5 �0

DE

5755

2


1250 A31.5 kA 630 A

1250 A40 kA 630 A

1250 A12 kV 25 kA 630 A

1250 A31.5 kA 630 A

1250 A40 kA 630 A

1250 A17.5 kV 25 kA 630 A

1250 A31.5 kA 630 A

1250 A

Phase to phase distance 240 mm

DE

5754

2 240

660

535

240 �0

DE

5755

2


31.5 kA 2500 A40 kA 630 A

1250 A2500 A

12 kV 25 kA 2500 A31.5 kA 2500 A40 kA 630 A

1250 A2500 A

17.5 kV 25 kA 2500 A31.5 kA 2500 A40 kA 630 A

1250 A2500 A

Important Detailed installation instructions are given in the “Evolis Installation Guide”. Please consult us.


Releases combinations tableMX1 1 1 1 1 1 1MX2 1 1MN 1 1 1 1Mitop 1 1 1 1 1


Order form

Only one of the boxes (ticked X or filled by the needed value) have to be considered between each horizontal line. Green box X corresponds to none priced functions.

Basic fixed circuit breaker Quantity

Rated voltage Ur (kV)

Short-circuit current Isc (kA)

Rated normal current Ir (A)

Phase to phase distance (mm) 145 185 240 Colour for push buttons and indicators

Push buttons open/closed: Red/black Indicator open/closed: Black/white Green/red Operating mechanism charged/discharged: Yellow/white

Circuit breaker optionsOpening release (see possible choices in combination table)

Shunt opening release MX124 Vac 24…30 Vdc 100…130 Vdc/ac 48 Vac 48…60 Vdc 200…250 Vdc/ac


Undervoltage release MN24 Vac 24…30 Vdc 100…130 Vdc/ac 48 Vac 48…60 Vdc 200…250 Vdc/ac

Time delay for MN48…60 Vac 100…130 Vdc/ac 200…250 Vdc/ac

Low energy release Mitop

Remote controlElectrical motor MCH

24…30 Vdc 100…125 Vdc 200…250 Vdc 48…60 Vdc/ac 100…130 Vac 200…240 Vac

Shunt closing release XF24 Vac 24…30 Vdc 100…130 Vdc/ac 48 Vac 48…60 Vdc 200…250 Vdc/ac

Module of 4 additional auxiliary contacts O/C 1 2 Ready to close contact PF LV plug

Without interlocking 18 pins 42 pins LV terminal blocks With interlocking 18 pins 42 pins

Locking of the circuit breaker in the open positionBy padlock or by locks and keys Profalux Ronis If locks 1 lock 2 identical locks 2 different locks

Push buttons padlock of O/C circuit breaker

Fixed connectionsUpstream and downstream fixed connections, Ir

3 fixed distance H or V 630-1250 A 630-2500 A 3 variable distance H 630-1250 A 630-2500 A 3 variable distance V 630-1250 A 630-2500 A



Offer structureSeparated components

The following components can be ordered separately and can be adapted or replaced by the customer.

Remote control and opening circuit Ref.

MX1, MX2, XF shunt opening/closing release

DE

5808

2 24…30 Vdc 24 V 50/60 Hz 5928448…60 Vdc 48 V 50/60 Hz 59285100…130 Vdc - 50/60 Hz 59286200…250 Vdc - 50/60 Hz 59287

Undervoltage release MN

DE

5808


Time delay for MN

DE

5808

3 48…60 Vdc - 50/60 Hz 33680100…130 Vdc - 50/60 Hz 33681200…250 Vdc - 50/60 Hz 33682


DE

5808

4 59160


DE

5808

6 24…30 Vdc 4788848…60 Vdc 47889100…125 Vdc 47890200…250 Vdc 4789148…60 V - 50/60 Hz 47889100…130 V - 50/60 Hz 47893200…240 V - 50/60 Hz 47894

Additional auxiliary contacts O/C

DE

5808

7 Module of 4 contacts 47887

LV terminal blocks

DE

5754

4 1 terminal block 47074

Ready to close contact PF

DE

5808

8 47080

Operation counter CDM

DE

5808

9 48535



Offer structureSeparated components (cont.)

MV and LV connection accessories Ref.

Upstream and downstream fixed connections, Ir

DE

5754

5

Fig. 1 Fig. 2 Fig. 3

DE

5754

6

DE

5754

7 3 fixed distance H or V (fig. 1) 630-1250 A 59400630-2500 A * 59409

3 variable distance H (fig. 3) 630-1250 A 59401630-2500 A * 59410

3 variable distance V (fig. 2) 630-1250 A 59402630-2500 A * 59411

(*) For 40 kA, you must take the 630-2500 A versions.

MV connection accessories

DE

5754

8

DE

5754

9

DE

5755

0

Cluster FingerArm

3 clusters + 3 fingers 630-1250 A 59369630-2500 A * 59371

3 arms 630-1250 A 59396630-2500 A * 59397

(*) For 40 kA, you must take the 630-2500 A versions.

Field deflectors for bushings

DE

5755

1 6 deflectors used to increase dielectric withstand from 75 to 95 kV 59283

LV plug

DE

5752

3 Standard 18 pins WITHOUT interlocking 59070Standard 18 pins WITH interlocking 59114All options 42 pins WITHOUT interlocking 59071All options 42 pins WITH interlocking 59115

LV wiring and ducting

PE

5660

1 Flexible conduct for LV wiring 59099LV connecting kit 42 wires AAA10 087

Other circuit breaker accessories Ref.

Labels kit for push button and indicator (O/C)

DE

5753

3

d i s c h a r g e d

charged

OK

charged

OK O OFF

pu

shO

FF

push ON

Circuit breaker specific labels green, red 59100

Circuit breaker opening external device

DE

5941

8 Adaptation kit needed for circuit breaker opening (for retrofit) 59093

Various Ref.

Circuit breaker support frame

DE

5755

5 Drawings and casters 59050

Technical documentation

DE

5755

6

Trip

on

I>51

b>51n

ext

SF6

b>>51

n

O off

I off

ir

reset

Prote

ctio

n

etco

ntrôle

cam

man

de

Gamm

e Sep

am

Sepam

1000

+

Inst

allat

ion

Utilisa

tion

Mise en

serv

ice

User manual 59069



Services

The following components can only be adapted or replaced on site by staff trained by Schneider Electric

Remote control mechanism (comprising: electrical motor, shunt closing release, operation counter)

Operation counterLow energy release (Mitop)Circuit breaker front cover.

b

bbb



Evolis 17.5 kV withdrawable version in NEX cradle

contents

Presentation 33Main characteristics 34Description of functions 36Racking in 36MV connection 37LV connection 38P2 stored energy operating mechanism 39Wiring diagram 39Opening circuit 40Remote control 42Indication 43Locking/interlocking 44Safety functions 45Service trucks 46


Services 52




Presentation

Evolis circuit breakers 17.5 kV withdrawable version in NEX cradle

Description of the deviceThe basic withdrawable version of the Evolis circuit breaker comprises:

the circuit breaker unit with its operating mechanism:three poles equipped with a vacuum interruptera P2 type, spring-operated stored energy control mechanism, electrifiable.


a front panel housing the manual operating mechanism and status indicators.the components enabling it to be withdrawable:the circuit breaker is equipped with racking arms and contact fingers and mounted

on a racking in/out drive device with a threaded shaft activated by a handle, including all of the safety interlock systems.

a Harting type male LV connector allows connection of the external auxiliary circuits.Each device can optionally be fitted with:

locking of the circuit breaker in the following positions:open, by a key lock installed on the control panelracked out, by a key lock installed on the drive device.the basic NEX cradle, comprising:a metal structure and two guide railsfixed connection fingers insulated by bushingsmetal shutters to insulate from the HV partsafety interlocking systems.NEX cradle options:circuit breaker racked-in or out position indicator contactsa circuit breaker racked-in blocking mechanisman extraction toola foolproof device for the circuit breaker rating.

Applications Evolis circuit breakers are three-pole indoor MV circuit breakers. They are mainly used for operation and protection of public, industrial and tertiary distribution networks from 7.2 to 17.5 kV. Through their compact dimensions and harmonized range, Evolis circuit breakers are positioned very favorably on the retrofit market.

bvv

vbv

v

bvvbvvvvbvvvv

PE

5799

4



Rated voltage Ur kV 50/60 Hz 7.2 12 17.5Insulation level- power frequency withstand Ud kV 50 Hz 1 min (*) 20 28 38- lightning impulse withstand Up kV peak 60 75 95Rated current Ir A 630 b b b b b b

1250 b b b b b b

2500 – – – – – –Short circuit current Isc kA 25 31.5 25 31.5 25 31.5Short time withstand current Ik/tk kA/3 s 25 31.5 25 31.5 25 31.5Short-circuit making current Ip kA peak 50 Hz 63 79 63 79 63 79

60 Hz 65 82 65 82 65 82









25 kA 10031.5 kA 5040 kA 30


Over 1 month < 90%


PE

5799

4




185 2407.2 12 17.5 7.2 12 17.5

20 28 38 20 28 3860 75 95 60 75 95b b – b b – b b – – b – – b – – b

b b – b b – b b – – b – – b – – b

– – – – – – – – b b b b b b b b b

25 31.5 40 25 31.5 40 25 31.5 25 31.5 40 25 31.5 40 25 31.5 4025 31.5 40 25 31.5 40 25 31.5 25 31.5 40 25 31.5 40 25 31.5 4063 79 100 63 79 100 63 79 63 79 100 63 79 100 63 79 10065 82 104 65 82 104 65 82 65 82 104 65 82 104 65 82 104




Description of functionsRacking in

Shutters

Door locking mechanism

Circuit breaker position contact locked

Racked in/out contacts

Earthing sliding device

CompositionThe “racking in” function is carried out by:

the racking truck supporting the circuit breaker (mobile part)the cradle with bushings (fixed part)LV plug.

OperationThe circuit breaker can be placed in 3 stable positions:

service position: circuit breaker racked in and locked in position;LV plugs connected

test position: circuit breaker racked out and locked in position;LV plug connected

disconnected position: circuit breaker racked out and locked in position; LV plug disconnected. The circuit breaker can be unlocked and extracted from the cradle.

DE

5759

8

DE

5759

7

DE

5759

6

Service position Test position Disconnected position

Note: the arrows show the “locked positions” for the circuit breaker and the LV plug.

FunctionsA drive system combined with a threaded shaft gives easier racking in and out.

The racking in mechanism can be operated with the door closed.An interlock stops the user from inserting the lever as long as the racking truck

has not been put in the “racked in/out” position.An interlock between the circuit breaker status and the truck gives secure operation:

racking in or out is only possible if the circuit breaker is open.An interlock also exists between the LV connector and the truck. It is only possible

to rack in if the LV connector is connected.The cradle floor has all the fixing holes needed to correctly position the earthing switch control mechanism and power circuit. This makes earthing switch operation reliable and gives interlocking between the circuit breaker and the earthing switch.

Earthing is automatic when the truck is fully racked in. Protective shutters stop fingers from touching the racking clusters when the

device is extracted (protection index: IP2X).For maintenance operations, it is possible to:padlock the shutters in the closed positionunlock the shutter mechanism to access the racking clusters.A foolproof device enables correct matching of the cradle and circuit breaker rating.

This system is mounted on the cradle base. Part of the system must be assembled by the panel builder on the cubicle floor.

AccessoriesOne set of auxiliary contacts:4 circuit breaker racked in/out position contacts1 contact showing that the circuit breaker is locked in place on the cradle.Cradle earthing is provided by a sliding copper contact.A key locking system (Ronis or Profalux) for the circuit breaker in the racked out

position enables increased safety downstream of it during work.This system is associated with an earthing switch.

Locking of the circuit breaker compartment door.This device enables the circuit breaker, full version, to only be operated when the door is closed.

bbb

b

b

b

b

b

b

b

bb

bvvb

bvvbb

b

DE

5755

7D

E57

558

DE

5755

9D

E57

560

DE

5756

1

DE

5756

3

C

C

DE

5756

2

Propulsion system



Description of functionsMV connection

DE

5756

4D

E57

565

DE

5756

6

Field deflectors

Power circuit

CompositionThe power circuit comprises:

mobile contacts with disconnectable clusters and arms mounted on the circuit breaker

fingers attached to the cradle and insulated by bushings and metal shutters.This assembly provides perfect control of the dielectric strength, mechanic,the short time withstand current and the temperature rise.All of these characteristics have been validated in tests.

ConnectionConnection is easily done from outside the cradle:

on vertical copper terminals integrated in the bushingby a connector set, also used on the base circuit breaker.

Note:The dielectric strength values given in the performance table, do not take these connectors into account.The panel builder must check the whole cubicle connection configuration.

For circuit breakers with a rated voltage of Ur = 17.5 kV with a phase to phase distance of 185 mm, field deflectors are used to increase the dielectric strength by 75 kV to 95 kV.

b

b

bb

3 connector sets



Description of functionsLV connection

Main functionsWith the base circuit breaker, the LV wiring uses a LV plug which comprises:

the fixed part (male) mounted on the circuit breaker and fully connected to the control mechanism

the mobile part (female) compatible with the male part.

Two versions of the LV plug are availableAn 18-pin version, enabling connection of:

a shunt opening release MX1a remote control mechanism (electrical motor, shunt closing release XF)a “ready to close” contact PFa maximum number of auxiliary contacts: 1 NC - 1 NO - 2 changeover contacts.

(see “indication” page, “Open/closed position auxiliary contacts” chapter).

An 42-pin version, enabling connection of:a shunt opening release MX1a second opening release (shunt type MX2 or undervoltage type MN)a low energy release (Mitop)a fault trip indicator contact SDEa remote contact reset system SDEa remote control mechanism (electrical motor, shunt closing release XF)a “ready to close” contact PFa maximum number of auxiliary contacts: 4 NC - 5 NO - 2 changeover contacts.

(see “indication” page, “Open/closed position auxiliary contacts” chapter).Note: see the table of the releases’ combinations “Order form” page.

Interlocking function:In conformity with IEC standard 62271-200, an interlocking function prohibits:

racking in when the LV plug is not connecteddisconnection of the LV plug if the circuit breaker is in the racked-in position.

LV wiring kitA wiring kit with 42 wires (2 meters long) equipped with pins that can be adapted to the LV plug can be supplied for connected in to the cubicle’s LV compartment.

Flexible ductingThis 525 mm long duct with a hinged LV plug, enables protection of the LV wiring that connects the circuit breaker to the cubicle’s LV compartment.

b

b

bbbb

bbbbbbbb

bb



DE

5752

3D

E57

524












b

b

bbbvvv

bb

b

PE

5660

0D

E59

408E

N


Auxiliary contacts


Remote control


SDE

or

PF

XF

MX1

MX2

MN

Mitop Reset

Charged

MCH










Latched 4.5

bbbb

b



DE

5808

1D

E58

082







Latched 4.5








Releases combinations tableShunt opening MX1 1 1 1 1 1 1Shunt opening MX2 1 1Undervoltage MN 1 1Mitop 1 1 1




DE

5808

2D

E58

083

DE

5808

4











Latched 4.5

bb




DE

5808

5D

E58

086

DE

5808

2











690 6V DC 24/48 10/6 *

125 10/6 *250 3


240 6380 3

V DC 24/48 6125 6250 3





690 3V DC 24/48 3

125 0.3250 0.15


240 3380 3

V DC 24/48 3125 0.3250 0.15


b

bvv

bbbbvv

DE

5808

7D

E58

088

DE

5808

9



Description of functionsLocking/interlocking

DE

5756

0

Cubicle door interlocking mechanism

C

C

DE

5753

5D

E57

536

Padlocking of the circuit breaker in the “open” position

DE

5753

7

Keylocking of the circuit breaker in the “open” position

��N��

Push button padlockThis transparent screen blocks access to the opening and closing push-buttonson the circuit breaker.The device enables the opening or closing push button to be locked independently. It is often associated with an electrical motor (MCH).Locking is achieved either:

by 2 screwsby 3 padlocks, not suppliedby a lead seal.

DE

5753

8

DE

5753

9

Padlocking Lead sealing

Locking of the circuit breaker in the “open” positionThe circuit breaker is locked in the “open” position by blocking the opening push button in the engaged position:

by a padlock 1 to 3 padlocks, not suppliedby a keylocks 1 or 2 different keylocks, not supplied

The keylocks are of captive key type, with the key free after locking, either Profaluxor Ronis (right turn), and are proposed according to the options either with:

1 single keylock1 single keylock mounted on the circuit breaker + 1 identical delivered separately

for interlocking with another device2 different keylocks for double locking.

Profalux and Ronis keylocks are inter-compatible.

Cubicle door interlocking mechanismThis device enables the circuit breaker to only be operated when the dooris closed, for the withdrawable version with a cradle.

bbb

bb

bb

b

Push button padlock

DE

5941

7

Ur=12kV

Up=75kV

Ir=630A

Isc=25kA tK=4s

Ud=42kV (50Hz 1min)


IEC 62271-100 Ed 1.1 20003-05

GB 1984

DL/T 402

N°:

fr=50Hz

Evolis

Locking the circuit breaker in the open position

Opening button

Closing button

Control mechanism status (charged or discharged)

Push button padlock

Circuit breaker position indicator

Operation counter



Description of functionsSafety functions

Parts Circuit breaker positionsInsertion

Extraction

Racking-in

Racking-out

Removed Disconnected Test position Service

1 - Cradle Fool-proof protection (1)

Anti-drop (2)

No opening shutters

Shutters padlocking possible

2 - LV plug Disconnected No door closing

Connected No unplugging

3 - Circuit breaker Closed No racking-in No racking-out

Open No closing

Open position circuit breaker locking available

4 - Switchboard door Open No racking-in

Closed No door opening (3)

5 - Earthing switch Open No earthing switch closing

Closed No racking-in

(1) This protection mechanism ensures that the performance levels of the circuit breaker correspond with those of the cradle.(2) Device that prevents the circuit breaker from dropping when extracted from the cradle. The device can be either unlocked manually or when the extraction rig is put in position. (3) Interlocking device to be fitted to the cubicle door. If there is no interlocking, the circuit breaker device should be inhibited.

This table describes the safety functions available on the withdrawable version of the Evolis 17.5 kV circuit breaker.How to use the tableEach of the boxes describes the functional status of each circuit breaker position and the associated parts:

Possible status

Possible status, impossible operation

Impossible status



Description of functionsService trucks

DE

5757

2D

E57

573

Earthing truck

Disconnecting truck

Disconnecting truckThis device allows disconnection of the upstream and downstream circuits in the cubicle. It is installed in the same location as the withdrawable circuit breaker in the cradle.It includes a device to lock it in the in-service position.

Electrical characteristicsRated voltage Ur kV 7.2 to 17.5Phase distance mm 145 185 240Rated normal current Ir A 1250 1250 2500Short-time withstand current (3 s) Ik kA 25 31.5 40Making capacity kA peak 2.5 Ik (50 Hz) & 2.6 Ik (60 Hz)

Earthing truckThis device is a safety accessory used in place of the withdrawable circuit-breaker in order to earth the busbars.Possibility of locking by padlocks in the service position.

Electrical characteristicsRated voltage Ur kV rms 12 17.5 17.5Phase distance mm 145 185 240Short-time withstand current (3 s) Ik kA 25 31.5 40Making capacity kA peak 2.5 Ik (50 Hz) & 2.6 Ik (60 Hz)



Dimensions

DevicePhase to phase distance 145 mm

DE

5757

4

DE

5757

7


1250 A12 kV 25 kA 630 A

1250 A


DE

5757

5

DE

5757

7


1250 A31.5 kA 630 A

1250 A12 kV 25 kA 630 A

1250 A31.5 kA 630 A

1250 A17.5 kV 25 kA 630 A

1250 A31.5 kA 630 A

1250 A


DE

5757

6

DE

5757

8


31.5 kA 2500 A40 kA 630 A

1250 A2500 A

12 kV 25 kA 2500 A31.5 kA 2500 A40 kA 630 A

1250 A2500 A

17.5 kV 25 kA 2500 A31.5 kA 2500 A40 kA 630 A

1250 A2500 A

Important Detailed installation instructions are given in the “Evolis Installation Guide”. Please consult us.



Order form

Basic withdrawable circuit breaker Quantity



Rated current Ir (A)












Module of 4 additional auxiliary contacts O/C 1 2 Ready to close contact PF LV plug with interlocking 42-pin LV plug (instead of 18) Operating shaft Quantity (one mini per switchboard) Locking of the circuit breaker in the open position

By padlock or by locks and keys Profalux Ronis If locks 1 lock 2 identical locks 2 different locks

Push buttons padlock of O/C circuit breaker

Cradle Quantity

Phase to phase distance (mm) 145 185 240 Bushings (6 per cradle) 630-1250 A 630-2500 A

Cradle accessoriesBlock of four position indication contacts:CB racked in/racked out One “CB ready to operate” indication contact Field deflectors for bushings

Releases combinations tableMX1 1 1 1 1 1 1MX2 1 1MN 1 1Mitop 1 1 1








DE

5808



DE

5808


Time delay for MN

DE

5808



DE

5808

4 59160


DE

5808



DE

5808


LV terminal blocks

DE

5754



DE

5808

8 47080

Operation counter CDM

DE

5808

9 48535


Cradle Ref.

Cradle without bushings

DE

5758

0 Phase to phase distance 145 mm 59316Phase to phase distance 185 mm 59317Phase to phase distance 240 mm 59318

Bushings

DE

5758

1 1 full bushing 630-1250 A 593821 full bushing 630-2500 A 59383(you need at least 6 bushings per cradle)

Field deflectors for bushings

DE

5755

1 6 deflectors used to increase dielectric withstand from 75 to 95 kV 59283

Indication of the “CB racked in/racked out” position

DE

5756


Indication of “CB ready to operate”

DE

5756

1 C.B. “ready to be operated” PAF (1 AC)(indicates that the C.B. is locked in place in the cradle) 59174

Racking base2 rails 59299






MV and LV connection accessories Ref.

LV plug

DE

5752

3 Standard 18 pins WITH interlocking 59114Standard 42 pins WITH interlocking 59115

LV wiring and ducting

PE

5660

1 Flexible conduct for LV wiring 59099LV connecting kit 42 wires AAA10 087

Other accessories Ref.

Earthing device

DE

5756

3 Earthing sliding contact on C.B. 59456

Labels kit for push button and indicator (O/C)

DE

5755

3

d i s c h a r g e d

charged

OK

charged

OK O OFF

pu

shO

FF

push ON

Circuit breaker specific labels green, red. 59100

Circuit breaker opening external device

DE

5941

8 Adaptation kit needed for circuit breaker opening (for retrofit) 59093

Various Ref.

Disconnecting truck

DE

5757

2 Phase to phase distance Ur Ir Ith145 mm 7.2-17.5 kV 1250 A 25 kA 59476185 mm 7.2-17.5 kV 1250 A 31.5 kA 59477240 mm 7.2-17.5 kV 2500 A 40 kA 59478

Earthing truck

DE

5757

3 Phase to phase distance Ur Ir Ith145 mm 7.2-17.5 kV 1250 A 31.5 kA 59012185 mm 7.2-17.5 kV 1250 A 31.5 kA 59474240 mm 7.2-17.5 kV 2500 A 40 kA 59475

Rack-in/rack-out operation

DE

5758

2 Operating shaft 59449

Technical documentation

DE

5755

6

Trip

on

I>51

b>51n

ext

SF6

b>>51

n

O off

I off

ir

reset

Prote

ctio

n

etco

ntrôle

cam

man

de

Gamm

e Sep

am

Sepam

1000

+

Inst

allat

ion

Utilisa

tion

Mise en

serv

ice

User manual 59069



Services



Operation counterLow energy release (Mitop)Interlocking between the “open” circuit breaker position and the LV plugRacking truckCircuit breaker front cover.

b

bbbbb


Presentation 55Main characteristics 56Description of functions 58Racking in 58MV and LV connection 60P2 stored energy operating mechanism 61Wiring diagram 61Opening circuit 62Remote control 64Indication 65Interlocking 66Safety functions 67


Services 72

Evolis 17.5 kV withdrawable version in MC cassette

Contents




Presentation

Evolis circuit breaker 17,5 kV withdrawable version in MC cassette

Description of the deviceThe basic withdrawable version of the Evolis circuit breaker comprises:

the circuit breaker unit with its operating mechanism:three poles equipped with a vacuum interruptera P2 type, spring-operated stored energy control mechanism, electrifiable.





locking of the circuit breaker in the following positions:open, by a key lock installed on the control panelracked out, by a key lock installed on the drive device.the basic MC cassette, comprising:a metal structure and two guide railsfixed connection fingers insulated by bushingsmetal shutters to insulate from the HV partsafety interlocking systemsa female Harting type LV connector.MC cassette options:circuit breaker racked-in or out position indicator contactsa circuit breaker operating mechanism spring discharge systema circuit breaker racked-in blocking mechanisman extraction toolan equipped doora foolproof device for the circuit breaker rating.

Applications Evolis circuit breakers are three-pole indoor MV circuit breakers. They are mainly used for operation and protection of public, industrial and tertiary distribution networks from 7.2 to 17.5 kV.

bvv

vbv

v

bvvbvvvvvbvvvvvv

PE

5808

9



Cassette type MC1Rated voltage Ur kV 50/60 Hz 7.2 12Insulation level- power frequency withstand Ud kV 50 Hz 1 min (*) 20 28- lightning impulse withstand Up kV peak 60 75Rated current Ir A 630 b b b b

1250 b b b b

2500 – – – –Short circuit current Isc kA 25 31.5 25 31.5Short time withstand current Ik/tk kA/3 s 25 31.5 25 31.5Short-circuit making current Ip kA peak 50 Hz 63 79 63 79

60 Hz 65 82 65 82









25 kA 10031.5 kA 5040 kA 30


Over 1 month < 90%


PE

5808

9




185 240MC2 MC37.2 12 17.5 7.2 12 17.5

20 28 38 20 28 3860 75 95 60 75 95– b b – b b b b – – b – – b – – –– b b – b b b b – – b – – b – – b

– – – – – – – – b b b b b b b b b

25 31.5 40 25 31.5 40 25 31.5 25 31.5 40 25 31.5 40 25 31.5 4025 31.5 40 25 31.5 40 25 31.5 25 31.5 40 25 31.5 40 25 31.5 4063 79 100 63 79 100 63 79 63 79 100 63 79 100 63 79 10065 82 104 65 82 104 65 82 65 82 104 65 82 104 65 82 104





Assembly componentsThe “racking-in/out” function is achieved by:

the withdrawable circuit breaker with its LV connector (mobile part)the cassette with its bushings (fixed part).

Circuit breaker operationThe withdrawable circuit breaker can be placed in 3 stable positions:



disconnected position: circuit breaker extracted and locked in this position, LV plug disconnected.

Circuit breaker safety functionsA drive system using a threaded shaft gives easier racking and unracking. Test position contactThis is activated when the circuit breaker is in the “test” or “service” position.Earthing is achieved throughout the operation via the racking carriage casters. An addition earthing system can be supplied as an option.Interlocking mechanismsIn conformity with IEC standards 62271-100 and 62271-200, the following interlocks are available:

impossibility of racking in or out is the circuit breaker is not in the “open” positionimpossible to rack in the circuit breaker when the LV plug is not connectedimpossible to disconnect the LV plug if the circuit breaker is not racked-out.

Cubicle door interlocking mechanismThe carriage is equipped with a device that enables interlocking between the racking out of the circuit breaker and the cubicle door:

possible to rack in the circuit breaker only if the door is closedpossible to open the door only if the circuit breaker is racked out.

This device must be disabled if the interlocking function is not present.

bb

b

b

b

bbb

bb

Operating position

DE

5758

4

Test position

DE

5758

5

Disconnected position

DE

5758

6D

E57

587

Interlocking door-cubicle

DE

5757

9



Description of functionsRacking in (cont.)

MC cassette safety functionsThe MC cassette is designed to receive the Evolis circuit breaker and comprises the following components ensuring safety when racking-in (see details in the Installation Guide ref. 07897536EN).Metal structure with two guide railsThe rails guide the Evolis circuit breaker during racking-in/out operations.Fixed connection fingers insulated by bushingsThe three ends of the circuit breaker, fitted with racking clusters, provide the contact with these three fingers.Metal shutters to insulate from the MV partThree shutters mounted on the structure stop access to the racking fingers when the circuit breaker is extracted (protection index: IP2X).Safety interlocking systemsWhen carrying out maintenance operations, it is possible to:

padlock the shutters in the closed positionunlock the access mechanism to the fixed contacts.

Anti-drop functionThis function ensures operator safety during circuit breaker extraction.

Compulsory MC cassette accessoriesFemale Harting low voltage connectorA connector with a cable can either be delivered with the circuit breaker, with the circuit breaker plus the cassette, or separately.Panel with circuit breaker operation pictogramsA self-adhesive panel shows racking-in and out operations for the circuit breaker. This is systematically delivered when the circuit breaker is ordered either with the cassette or as a separate order.Racking handleThe handle is used for circuit breaker racking-in/out operations and for earthing switch opening and closing operations.Extraction tool

A standard tool allows the breaking device to be extracted from each cassette version, whatever the installation height, up to 800 mm from the ground.

A simplified extraction tool can be manufactured locally according to the installation height.

MC cassette optionsCircuit breaker racked-in or racked-out position indicator contacts6 contacts (3 NO + 3 NC) or 12 contacts (6 NO + 6 NC)Operating mechanism spring discharge systemCircuit breaker operating mechanism springs are automatically discharged when it is extracted from the cubicle. This function avoids any risk of unwanted circuit breaker closing.Mechanical circuit breaker racked-in lockThis option is included when the earthing switch is installed. However, it can be delivered separately if the earthing circuit breaker is not required: it takes the space and volume of the earthing switch operating mechanism.Equipped MV access doorPossibility of delivering a fully equipped, painted door (RAL 9001) available with or without the manual circuit breaker closing mechanism.Possibility of producing the door locally (drawings and accessories available).Foolproofing deviceThis enables foolproofing of the circuit breaker rating relative to the cassette rating. This system is mounted on the cassette side. The corresponding combining of the right circuit breaker rating must be carried out by the panel builder.

bb

b

b

Indication contacts

Discharge of the circuit breaker operating mechanism on extraction

Cassette/circuit breaker foolproofing device

DE

5759

2D

E57

591

DE

5758

8D

E57

589

Extraction tool

DE

5759

0



Description of functionsMV and LV connection

MV connectionThe customer connection is easily made at the rear of the cassette on the connection terminals integrated in the bushings (see drilling details in the “Installation Guide” ref. 07897536EN).

DE5

7593

MV connection

LV connectionWith the withdrawable circuit breaker, the LV cabling has an LV connector with:

a mobile part (male Harting connector) at the end of a flexible cable, fully connected to the operating mechanism terminal by a sleeve

a fixed part (female Harting connector) compatible with the male part mounted at the top, inside the cassette.Interlocking functionIn conformity with IEC standard 62271-200, an interlocking function prohibits:


DE5

7594

LV plug connection

b

b

bb












b

b

bbbvvv

bb

b

PE

5660

0D

E59

408E

N


Auxiliary contacts


Remote control


SDE

or

PF

XF

MX1

MX2

MN

Mitop Reset

Charged

MCH










Latched 4.5

bbbb

b



DE

5808

1D

E58

082







Latched 4.5








Releases combinations tableShunt opening MX1 1 1 1 1 1 1Shunt opening MX2 1 1Undervoltage MN 1 1Mitop 1 1 1




DE

5808

2D

E58

083

DE

5808

4











Latched 4.5

bb




DE

5808

5D

E58

086

DE

5808

2











690 6V DC 24/48 10/6 *

125 10/6 *250 3


240 6380 3

V DC 24/48 6125 6250 3





690 3V DC 24/48 3

125 0.3250 0.15


240 3380 3

V DC 24/48 3125 0.3250 0.15


b

bvv

bbbbvv

DE

5808

7D

E58

088

DE

5808

9



Description of functionsInterlocking

Cubicle door interlocking mechanismThis device enables the circuit breaker to only be operated when the dooris closed, for the withdrawable version with a cradle.

DE

5758

7

Cubicle door interlocking mechanism





Extraction

Racking-in

Racking-out


1 - Cassette Fool-proof protection (1)

Anti-drop (2)

No opening shutters



Connected No unplugging

3 - Circuit breaker Closed No racking-in No racking-out

Open No closing

Open position circuit breaker locking available





(1) This protection mechanism ensures that the performance levels of the circuit breaker correspond with those of the cassette.(2) Device that prevents the circuit breaker from dropping when extracted from the cassette. The device can be either unlocked manually or when the extraction rig is put in position. (3) Interlocking device to be fitted to the cubicle door. If there is no interlocking, the circuit breaker device should be inhibited.

This table describes the safety functions available on the withdrawable version of the Evolis 17.5 kV circuit breaker.How to use the tableEach of the boxes describes the functional status of each circuit breaker position and the associated parts:

Possible status


Impossible status



Dimensions

DeviceBasic withdrawable

DE

5719

3EN E E

W D

370

300

321 611 100

550

285

H805

Cassette MC1 MC2 MC3Phase to phase (mm) E 145 185 240Dimensions (mm) W 556 686 886

H 980 980 980D 1223 1223 1223

Weight (kg) 222 255 326



Order form
















Module of 4 additional auxiliary contacts O/C 1 2 Ready to close contact PF LV plug 42-pin LV plug (instead of 18) Operating shaft Quantity (one mini per switchboard)

MC cassette Quantity

MC cassette type MC1 MC2 MC3 Short-circuit current Isc y 40 kA Rated current Ir 1250 A 2500 A

MC cassette accessoriesRacked in/out position contact 3 NO, 3 NC 6 NO, 6 NC Pictogram of the circuit breaker of the earthing sw.Discharge of the circuit breaker control mechanism springs Extraction table Quantity Extra handle Quantity Door with handle, windows and pictogram

MC1 MC2 MC3 Door accessories (local manufacture): handle, windows and pictogramwith cover plate for MC1 MC2 MC3

Releases combinations tableMX1 1 1 1 1 1 1MX2 1 1MN 1 1Mitop 1 1 1








DE

5808



DE

5808


Time delay for MN

DE

5808



DE

5808

4 59160


DE

5808



DE

5808


LV terminal blocks

DE

5754



DE

5808

8 47080




Accessories Ref.

MC cassette

DE

5758

8 MC1 51237324FRMC2 51237324FQMC3 (Ir up to 1250 A) 51237324FWMC3 (Ir > 1250 A) 51237324FS

Indication of the “CB racked in/racked out” positionModule of 6 contacts AAA12951FAModule of 12 contacts AAA12951FB


DE

5758

2 Operating shaft 03405140FO



Services



Operation counterLow energy release (Mitop)Interlocking between the “open” circuit breaker position and the LV plugRacking truckCircuit breaker front cover.

b

bbbbb


Presentation 74Main characteristics 75Description of functions 76Racking in 76MV and LV connection 78RI stored energy operating mechanism 79Wiring diagram 79Opening circuit 80Remote control 81Indication 82Safety functions 83


Services 87

Evolis HP withdrawable version in MC cassette

Contents



PresentationP

E56

545

Evolis HP circuit breakerwithdrawable version in MC cassette

Description of the deviceThe basic withdrawable version of the Evolis HP circuit breaker comprises:

the circuit breaker unit with its operating mechanism:three poles equipped with a vacuum interrupter an RI stored energy electrical operating mechanism.





locking of the circuit breaker in the following positions:open, by a key lock installed on the control panelracked out, by a key lock installed on the drive device.the basic MC cassette, comprising:a metal structure and two guide railsfixed connection fingers insulated by bushingsmetal shutters to insulate from the HV partsafety interlocking systemsa female Harting type LV connector.MC cassette options:circuit breaker racked-in or out position indicator contactsa circuit breaker operating mechanism spring discharge systema circuit breaker racked-in blocking mechanisman extraction toolan equipped doora foolproof device for the circuit breaker rating.

Applications Evolis circuit breakers are three-pole indoor MV circuit breakers. They are mainly used for operation and protection of public, industrial and tertiary distribution networks from 7.2 to 15 kV.

bvv

vbv

v

bvvbvvvvvbvvvvvv




Electrical characteristics according to IEC 62271-100Phase to phase 240

Cassette type MC3Rated voltage Ur kV 50/60 Hz 7.2 12 15Insulation level- power frequency withstand Ud kV 50 Hz 1 min 20 28 38- lightning impulse withstand Up kV peak 60 75 95Rated current Ir A 1250 – – – – – – – b – – – b

2500 – – – b – – – b – – – b

3150 b b b b b b b b b b b b

Short circuit current Isc kA 25 31.5 40 50 25 31.5 40 50 25 31.5 40 50Short time withstand current Ik/tk kA/3 s 25 31.5 40 50 25 31.5 40 50 25 31.5 40 50Short-circuit making current Ip kA peak 50 Hz 63 79 100 125 63 79 100 125 (*) 63 79 100 125 (*)

60 Hz 65 82 104 130 65 82 104 130 (*) 65 82 104 130 (*)




Operating times Opening ms < 52Breaking ms < 73Closing ms < 61


Number of operations 10 000Electrical endurance Class E2Number of switching operations at full Isc value

25 kA 10031.5 kA 5040 kA 3050 kA 30


Over 1 month < 90%

b Available– Not available.(*) 150 kA available on request.




Operation position

DE

5762

5

Test position

DE

5762

6

Disconnected position

DE

5762

7D

E57

628

Interlocking door-cubicle

Assembly componentsThe “racking-in/out” function is achieved by:

the withdrawable circuit breaker with its LV connector (mobile part)the cassette with its bushings (fixed part).

Circuit breaker operationThe withdrawable circuit breaker can be placed in 3 stable positions:



disconnected position: circuit breaker extracted and locked in this position, LV plug disconnected.

Circuit breaker safety functionsA drive system using a threaded shaft gives easier racking and unracking. Test position contactThis is activated when the circuit breaker is in the “test” or “service” position.Earthing is achieved throughout the operation via the racking carriage casters. An addition earthing system can be supplied as an option.Interlocking mechanismsIn conformity with IEC standards 62271-100 and 62271-200, the following interlocks are available:

impossibility of racking in or out is the circuit breaker is not in the “open” positionimpossible to rack in the circuit breaker when the LV plug is not connectedimpossible to disconnect the LV plug if the circuit breaker is not racked-out.

Cubicle door interlocking mechanismThe carriage is equipped with a device that enables interlocking between the racking out of the circuit breaker and the cubicle door:

possible to rack in the circuit breaker only if the door is closedpossible to open the door only if the circuit breaker is racked out.

This device must be disabled if the interlocking function is not present.

bb

b

b

b

bbb

bb

DE

5762

4



Description of functionsRacking in (cont.)

DE

5760

5D

E57

606

Extraction tool

Indication contacts

DE

5760

7

(A) 50 kA interlock(B) Discharge of the circuit breaker operating mechanism on extraction

Cassette/circuit breaker foolproofing device

DE

5760

8D

E57

609

MC cassette safety functionsThe MC cassette is designed to receive the Evolis circuit breaker and comprises the following components ensuring safety when racking-in (see details in the Installation Guide ref. 07897536EN).Metal structure with two guide railsThe rails guide the Evolis circuit breaker during racking-in/out operations.Fixed connection fingers insulated by bushingsThe three ends of the circuit breaker, fitted with racking clusters, provide the contact with these three fingers.Metal shutters to insulate from the MV partThree shutters mounted on the structure stop access to the racking fingers when the circuit breaker is extracted (protection index: IP2X).Safety interlocking systemsWhen carrying out maintenance operations, it is possible to:

padlock the shutters in the closed positionunlock the access mechanism to the fixed contacts.

Anti-drop functionThis function ensures operator safety during circuit breaker extraction.

Compulsory MC cassette accessoriesFemale Harting low voltage connectorA connector with a cable can either be delivered with the circuit breaker, with the circuit breaker plus the cassette, or separately.Panel with circuit breaker operation pictogramsA self-adhesive panel shows racking-in and out operations for the circuit breaker. This is systematically delivered when the circuit breaker is ordered either with the cassette or as a separate order.Racking handleThe handle is used for circuit breaker racking-in/out operations and for earthing switch opening and closing operations.Extraction tool

A standard tool allows the breaking device to be extracted from each cassette version, whatever the installation height, up to 800 mm from the ground.

A simplified extraction tool can be manufactured locally according to the installation height.50 kA fixing lockThis upper lock enabling the circuit breaker to be held in the cassette in the case of a fault, is compulsory for a 50 kA withstand.

MC cassette optionsCircuit breaker racked-in or racked-out position indicator contacts6 contacts (3 NO + 3 NC) or 12 contacts (6 NO + 6 NC)Operating mechanism spring discharge systemCircuit breaker operating mechanism springs are automatically discharged when it is extracted from the cubicle. This function avoids any risk of unwanted circuit breaker closing.Mechanical circuit breaker racked-in lockThis option is included when the earthing switch is installed. However, it can be delivered separately if the earthing circuit breaker is not required: it takes the space and volume of the earthing switch operating mechanism.Equipped MV access doorPossibility of delivering a fully equipped, painted door (RAL 9001) available with or without the manual circuit breaker closing mechanism.Possibility of producing the door locally (drawings and accessories available).Foolproofing deviceThis enables foolproofing of the circuit breaker rating relative to the cassette rating. This system is mounted on the cassette side. The corresponding combining of the right circuit breaker rating must be carried out by the panel builder.

bb

b

b



Description of functionsMV and LV connection

MV connectionThe customer connection is easily made at the rear of the cassette on the connection terminals integrated in the bushings (see drilling details in the “Installation Guide” ref. 07897536EN).

DE5

7593

MV connection

LV connectionWith the withdrawable circuit breaker, the LV cabling has an LV connector with:

a mobile part (male Harting connector) at the end of a flexible cable, fully connected to the operating mechanism terminal by a sleeve

a fixed part (female Harting connector) compatible with the male part mounted at the top, inside the cassette.Interlocking functionIn conformity with IEC standard 62271-200, an interlocking function prohibits:


DE5

7610

LV plug connection

b

b

bb



Description of functionsRI stored energy operating mechanismWiring diagram

PE

5716

4 Operation of the RI stored energy operating mechanismThis gives the device an opening and closing speed that is independent of the operator whether the order is electrical or manual.The electrical control mechanism carries out reclosing cycles and is automatically recharged by a geared motor each time after closing. It consists of:


a manual lever-operated spring arming devicea geared electrical arming device which automatically re-arms the control

mechanism as soon as the circuit breaker is closed (optional)manual order devices by push buttons on the front panel of the device an electrical remote closing device containing a release with an antipumping relayan electrical opening order device comprising one or several release units which

can be of the following type:shunt openingundervoltageMitop, a low consumption release, used only with the Sepam 100 LA

protection relay.an operation counteran “open/closed” position indicator device with a mechanical indicator a device for indicating “charged” operating mechanism status by mechanical

indicator and electrical contact (optional)a module of 14 auxiliary contacts whose availability varies according

to the diagram used.


b

bb

bbb

vvv

bbb

b

M

YF +anti-pumping

Motor Shunt closingrelease+ anti-pumpingsystem

Remote control

Shunt openingrelease

Under-voltagerelease

Low energyrelease(Mitop)

NO contacts

Changeovercontact

NC contacts

Close CB

Open CB

YM

M3

Mitop

“Control mechanism armed” indicator contact

YO1 YO2

DE

5940

9EN




DE

5761

2EN

Operating mechanism

Shunt opening release (1)

Undervoltage release (2)

Low energy release (3)

(1) or (3)(2)

CompositionThe opening circuit can be produced using the following components:

a shunt opening release (on energizing) (YO1)a second shunt opening release (on energizing) (YO2)undervoltage release (YM)low energy release (Mitop).

Note: see the table of the releases’ combinations page “Order form” .

Shunt opening release (YO1 and YO2)Energizing this unit causes instant opening of the circuit breaker.

CharacteristicsPower supply See “Order form” pageThreshold V AC 0.85 to 1.1 Ur

V DC 0.7 to 1.1 UrConsumption V AC 160 VA

V DC 50 W

Undervoltage release (YM)This release unit causes the systematic opening of the circuit breaker when its supply voltage drops below a value less than 35% of the rated voltage, even if this drop is slow and gradual. It can open the circuit breaker between 35% and 70% of its rated voltage. If the release unit is not supplied power, manual or electrical closing of the circuit breaker is impossible. Closing of the circuit breaker is compulsory when the supply voltage of the release unit reaches 85% of its rated voltage.


Closing 0.85 UrConsumption Triggering V AC 400 VA

V DC 100 WLatched V AC 100 VA

V DC 10 W

Low energy release (Mitop)This specific release unit comprises a low consumption unit and is specifically used for Sepam 100LA self-powered relays.

CharacteristicsPower supply Direct current Threshold 0.6 A < I < 3 A

Any tripping due to the Mitop release unit is momentarily indicated by an SDE type changeover contact (option).

bbbb

DE

5809

2D

E58

093

DE

5809

4




DE

5760

4

Operating mechanism

Electrical motor with gearing (4)

Shunt closing release (5)

Operation counter (6)

FunctionRemote control enables the remote opening and closing of the circuit breaker.

CompositionThe remote control mechanism comprises:

an electrical motor with gearing a shunt closing release (YF) combined with an anti-pumping devicean operation counter.

Electrical motor with gearing (M)The electrical motor carries out the automatic rearming of the stored energy unit as soon as the circuit breaker is closed. This allows the instant reclosing of the device after opening. The arming lever is only used as a backup operating mechanism in the case of the absence of the auxiliary power supply.The M3 contact indicates the end of arming operations.

CharacteristicsPower supply See “Order form” pageThreshold V AC/V DC 0.85 to 1.1 UrConsumption V AC 380 VA

V DC 380 W

Shunt closing release (YF)This release allows the remote closing of the circuit breaker when the operating mechanism is armed.

CharacteristicsPower supply See “Order form” pageThreshold V AC 0.85 to 1.1 Ur

V DC 0.85 to 1.1 UrConsumption V AC 160 VA

V DC 50 W

The shunt closing release is combined with an anti-pumping relay that enables priority to be given to opening in the case of a permanent closing order. This thus avoids the device being caught in an uncontrolled opening-closing cycle.

Operation counterThe operation counter is visible on the front panel.It displays the number of switching cycles (CO) that the device has carried out.

bbb

DE

5809

6D

E58

097

DE

5809

2




Operating mechanism

Auxiliary contacts (7)

“Open/closed” auxiliary contacts The number of contacts available depends on the options chosen on the operating mechanism.In the basic configuration, the circuit breaker’s operating mechanism comprises a total of:

5 normally closed contacts (NC)5 normally open contacts (NO)1 changeover contact (CHG).

The usage procedure for auxiliary contacts is given in the following table:

OptionsNC contact NO contact

Shunt opening release (each one) 0 1Undervoltage release 0 0Low energy release (Mitop) 0 0

In order to know the final number of available contacts, you must deduct the total number of contacts included in the circuit breaker (5 NC + 5 NO + 1 CHG), the number of contacts used given in the table above.E.g.: a circuit breaker equipped with a remote control and a shunt trip unit has the following available contacts: 5 NC + 4 NO + 1 CHG. With a undervoltage release instead of the shunt trip, this circuit breaker would have the following available contacts: 5 NC + 5 NO + 1 CHG.

Shunt opening release combination1st release

2nd release

Shunt opening release YO1

Undervoltage release YM

Mitop

Without 5NC + 4NO + 1CHG 5NC + 5NO+ 1CHGShunt opening release YO2

5NC + 3NO + 1CHG 5NC + 4NO+ 1CHG 5NC + 4NO + 1CHG


5NC + 4NO + 1CHG 5NC + 5NO + 1CHG

Mitop 5NC + 4NO + 1CHG 5NC + 5NO + 1CHG

bbb

DE

5761

3D

E58

098





Extraction

Racking-in

Racking-out


1 - Cassette Fool-proof protection (1)

Anti-drop (2)

No opening shutters



Connected No unplugging (5)

3 - Circuit breaker Closed Auto-discharge function (3)

No racking-in No racking-out

Open No closing

Open position circuit breaker locking available (3)





(1) This protection mechanism ensures that the performance levels of the circuit breaker correspond with those of the cassette.(2) Device that prevents the circuit breaker from dropping when extracted from the cassette.(3) Option.(4) Interlocking device to be fitted to the cubicle door.(5) Because the door is closed.

This table describes the safety functions available on the Evolis HP circuit breaker.How to use the tableEach of the boxes describes the functional status of each circuit breaker position and the associated parts:

Possible status


Impossible status



Dimensions

DeviceWithdrawable with MC3 cassette

DE

5719

4EN

DW

H805

370

550

321 611 100

285

300

240 240Dimensions (mm) W 886

H 980D 902

Weight (kg) 338



Order form

Releases combinations tableYO1/YO2 1 2 1 1YM 1 1 1Mitop 1 1




Impulse voltage Up (kVbil)



Frequency 50 Hz 60 Hz Colour for push buttons and indicators

Push buttons open/closed: Red/black Indicator open/closed: Black/white Green/red Operating mechanism charged/discharged: White/yellow charged/discharged


Shunt opening release YO124 Vdc 110 Vdc 220 Vdc 110 Vac (50 Hz) 48 Vdc 125 Vdc 220 Vac (50 Hz) 120 Vac (60 Hz)

Shunt opening release YO224 Vdc 110 Vdc 220 Vdc 110 Vac (50 Hz) 48 Vdc 125 Vdc 220 Vac (50 Hz) 120 Vac (60 Hz)

Undervoltage release YM24 Vdc 110 Vdc 220 Vdc 110 Vac (50 Hz) 48 Vdc 125 Vdc 220 Vac (50 Hz) 120 Vac (60 Hz)

Low energy release Mitop Without contact With contact

Remote controlElectrical motor M 24…32 Vdc 110…127 Vdc/ac

48…60 Vdc/ac 220…250 Vdc/ac Shunt closing release YF

24 Vdc 110 Vdc 220 Vdc 110 Vac (50 Hz) 48 Vdc 125 Vdc 220 Vac (50 Hz) 120 Vac (60 Hz)

MC cassetteMC cassette type MC3 Short-circuit current Isc y 40 kA 50 kA Rated current Ir 1250 A 2500 A 3150 A

MC cassette accessoriesRacked in/out position contact 3 NO, 3 NC 6 NO, 6 NC Pictogram of the circuit breaker of the earthing sw.Discharge of the circuit breaker control mechanism springs Extraction table Quantity Extra handle Quantity Door with handle, windows and pictogram Door accessories (local manufacture): handle, windows and pictogramwith cover plate





Remote control Ref.

Shunt opening release YO1 or YO2

DE

5809

2 24 Vdc AAA10 11548 Vdc AAA10 116110 Vdc AAA10 117125-127 Vdc AAA10 118220 Vdc AAA10 119110 Vac 50 Hz AAA10 120220-230 Vac 50 Hz AAA10 121120 Vac 60 Hz AAA10 122

Shunt closing release YF

DE

5809



DE

5809



DE

5809

4 Without contact 0889308AWith contact 0889308B

Electrical motor

DE

5762

1 24…32 Vdc AAA10 02748…60 Vac/cc AAA10 028100…127 Vac/cc AAA10 029220…250 Vac/cc AAA10 030

DE

5762

2 Gear reducer AAA10 065

AccessoriesMC cassette

DE

5760

5 MC3 (Ir up to 1250 A) 51237324FWMC3 (Ir greater than 1250 A) 51237324FS


DE

5758

2 Operating shaft 03405140FO



Services


Remote control mechanism (comprising: electrical motor, gear reducer, shunt closing release, operation counter)

Operation counterLow energy release (Mitop)Interlocking between the “open” circuit breaker position and the LV plugRacking truckDischarging the extraction control mechanism.

b

bbbbb


Notes

AMTED307010EN 03-2010

AR

T.83

1041

© S

chne

ider

Ele

ctric

Indu

strie

s S

AS

- A

ll rig

hts

rese

rved

As standards, specifications and designs change from time to time, please ask for confirmation of the information given in this publication.

Publishing: Schneider Electric Industries SASDesign: Schneider Electric Industries SASPrinting: Imprimerie du Pont de Claix/JPF - Made in France

This document has been printed on ecological paper

Schneider Electric Industries SAS35, rue Joseph Monier CS 30323 F - 92506 Rueil Malmaison Cedex

RCS Nanterre 954 503 439 Capital social 896 313 776 €www.schneider-electric.com

Documents

Medium Voltage Distribution Evolis circuit breakers 17.5 kV 17.5KV-2010.pdf · 2018-06-23 · General presentation Evolis Circuit breakers adapted to your needs (*) The Evolis 24