Embed Size (px)
Citation preview
A Hilco Global CompanyVested in Your Success
31555 West Fourteen Mile Road, Suite 301Farmington Hills, Michigan 48334 USAPh 248-254-9999 • Fx 248-254-9995
www.hilcoind.com
FORMER AIRCRAFT MAINTENANCE ANDREPAIR SHOP
Including MRO for Aircraft Models C-130, C-12, RC-12, UC-35, C/KC-135, & P-3 – For Over 80 Years
Assets no longer necessary
in the continuing operations of
ONLINE AUCTION
Over 3000 Lots
Online Bidding Closes: Tuesday thru Thursday, October 28
th– 30
th
Birmingham, Alabama
To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)2
ONLINE AUCTIONHilcoTM IndustrialAssets no longer necessary in the continuing operations of
ONlINE BIddINg ClOSES
TUESDAY THRU THURSDAY,OCTOBER 28
THTHRU 30
TH
CHeCk www.HIlCoInd.Com For ClosInG tImes
PREVIEwMONDAY THRU THURSDAY,OCTOBER 27TH THRU 30TH
8AM TO 4PM LOCAL TIME to sCHedUle An eArlIer InspeCtIon, pleAse ContACt mArk reynolds At 205-595-5999 or emAIl [email protected]
ASSET lOCATION1943 50TH STREET NORTH BIRMINGHAM, AL 35212
FURTHER INFORMATION• AN 18% BUYER'S PREMIUM WILL BE CHARGED ON ALL ASSETS. THE BUYER’S
PREMIUM WILL BE REDUCED TO 16% FOR PAYMENTS MADE BY MEANS OFCASH, CASHIER’S CHECK, COMPANY CHECK (WITH BANK LETTER OF GUARAN-TEE) OR WIRE TRANSFER WITHIN 48 HOURS OF SALE CLOSE. AUCTION WILL BECONDUCTED IN ENGLISH, ACCEPTING U.S. CURRENCY ONLY.
• REMOVAL DEADLINE IS FRIDAY, NOVEMBER 21ST WITH HOURS OF REMOVAL BETWEEN8AM TO 4PM MONDAY THRU FRIDAY. BUYERS WITH ITEMS LEFT ON SITE AFTER DEADLINE ARE SUBJECT TO FINES OF $500 PER DAY.
MACHINERY & EQUIPMENT
MARK REYNOLDS 205-595-5999 • [email protected] INFORMATION
LESIA JOSEPH 616-328-6892 • [email protected] ACCOUNTS RECEIVABLE AT [email protected] SERVICE
+1 877-37-HILCO • +1 616-732-1800 • [email protected] NEELY AT 248-254-9999 X16 • [email protected]
Information contained herein deemed to be accurate at time of printing and subject to change. For updated information, please visit our website at www.hilcoind.com for any changes to
date, sale process, terms and conditions and list of available assets.
AIRCRAFT MAINTENANCE & REPAIR EQUIPMENT
For more information, please visit us on the web at www.hilcoind.com 3
AIRCRAFT MAINTENANCE & REPAIR EQUIPMENT
AIRCRAFT MAINTENANCE & REPAIR EqUIPMENT1 – NATIONAL MODEL 50 5000 GALLON FUEL TRUCK, S/N N1015, Hale
4DE4-5 Pump, Velcon Filter, 8.2L Detroit Diesel Engine, Garsite Model No. 5MS-600S-RLSC-ADASS, S/N 3708 (2004)
4 – AIRCRAFT LEVELING TABLES, W/ TRANSITS
6 – MODEL B1 AIRCRAFT MAINTENANCE STANDS
16 – MODEL B5 AIRCRAFT MAINTENANCE STANDS
68 – MODEL B4 AIRCRAFT MAINTENANCE STANDS
22 – MODEL B2 AIRCRAFT MAINTENANCE STANDS
1 – C-130 PROPELLER REMOVAL & INSTALLATION KIT
1 – C-130 RAINBOW MILLING MACHINE
5 – C-130 WING SHORING & JACKS
4 – C-130 BELLY SHORING SETS
5 – C-130 SHORING SETS
12 – C-130 ENGINE STANDS
2 – NOSE DOLLIES
2 – STEWART & STEVENSON MODEL TMAC 135 JET ENGINE AIR START SYSTEMS,S/N AZ 120-116
1 – HYDRAULIC BRAKE TEST
6 – PORTABLE HYDRAULIC TEST MACHINES
4 – HOBART MODEL 90GT20P DIESEL GENERATORS, 400 Cycle, 28 Volt DC
7 – HOBART MODEL 3208 ELECTRIC GENERATORS, 400 Cycle, 440 Volt Input
LARGE QUANTITY OF Assorted Aircraft Jacks, Ranging From 10 Ton to 60 Ton, AircraftWork Stands, Assorted P-3 Shoring, Including Engine & Wing Stands, Etc.
CNC MACHINERY • FIRE FIGHTING & SAFETY EQUIPMENT • BLAST EQUIPMENT
To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)4
CNC MACHINERY1 – HARDINGE MODEL SV 200/66 CNC TURNING CENTER,
S/N BLEA7K0029 (2007), Fanuc SV Control, Max. MachiningDia. 14", Turning Length 23.6", Max. Spindle Speed 4500RPM, Tonfou #TF3X-08 3-Jaw Chuck, 12 Position Turret,Hydraulic Tailstock, Tool Probe, Parts Catcher & Conveyor, 25H.P., 220 Volt
1 – MITSUBISHI MODEL M-V65C CNC VERTICAL MACHININGCENTER, S/N V65C018 (1991), Meldas Series 300 Control,27.6" x 65" Table, Table Travels, X-Axis 1250mm, Y-Axis660mm, Spindle Speed 4000 RPM, Cat 50 Taper, 24 – Position ATC, 460 Volt
1 – MITSUBISHI MODEL M-V60C CNC VERTICAL MACHININGCENTER, S/N V60C021 (1991), Meldas Series 300 Control,23.6" x 55.1" Table, Table Travels, X-Axis 1000mm, Y-Axis600mm, Spindle Speed 4000 RPM, Cat 50 Taper, 24 – Position ATC, 460 Volt
1 – MITSUBISHI MODEL M-V40A CNC VERTICAL MACHININGCENTER, S/N CV3408 (1992), Meldas Series 300 Control,16" x 35.5" Table, Cat 40 Taper, 18 – Position ATC
FIRE FIgHTINg & SAFETY EqUIPMENT1 – HAHN HCP 10 FIRE TRUCK, S/N HCP22810787 (1977),
25,180 Miles, Allison HT-740-D Transmission, Pump ModelOLF-100, 1000 Gal. @ 150# 1750 RPM, 700 Gal. @ 200#1610 RPM, 500 Gal. @ 250# 1580 RPM
10 – SCOTT MODEL 4.5 AIR-PAK SELF CONTAINED BREATHINGAPPARATUSES
25 – BADGER WHEELED DRY CHEMICAL FIRE EXTINGUISHERS
40 – AMEREX MODEL 495 WHEELED DRY CHEMICAL FIREEXTINGUISHERS
15 – FIRE PROTECTION SUITS, Sperian Coats & Pants w/Bullard Helmets
BlAST EqUIPMENT1 – VACU-BLAST MODEL J480 DUAL CHAMBER BLAST SYSTEM,
S/N J-67-309, First Chamber, Nozzles, Chamber Are 36" Deep x 108"L-R, 72" High, Door Opening 60" x 48", Second Chamber, 2-Nozzles,Chamber Area, 24" Deep x 72" L-R, 54" High, Door Opening 60" x 36"
1 – ECONOLINE MODEL DP-36 BLAST CABINET, S/N 0504 BP36-1, w/ Reclaim System, Work Area, 36" L-R
1 – SKAT BLAST, BLAST CABINET, w/ Reclaim System, Work Area, 46" L-R, x 30" F-B, x 28" High
QUANTITY OF Clemco Portable Blast Pots
CABlE & HOSE EqUIPMENT1 – MODEL 1-1 HOSE ASSEMBLY MACHINE, S/N 164 (1981), 230 Volt
1 – HOSE ASSEMBLY MACHINE, S/N 1431771/278, 230 Volt
1 – ATI 1/16 – 1/4 CABLE SWAGER, S/N 5627
1 – CABLE END PULL TESTER, Approx. 25' Long
1 – BARBEE HOSE PROOF TESTER
2 – GREER HYDRAULIC TEST MACHINES, S/NS K-128, U-142
1 – 60 H.P. HYDRAULIC TEST PUMP
2007
FABRICATION & SHEET METAL MACHINERY • DRILLS • LATHES
For more information, please visit us on the web at www.hilcoind.com 5
2008
Register and Bid
Online Only at
www.hilcoind.com
FABRICATION & SHEET METAl MACHINERY1 – MUBEA MODEL KBL 1-1/2 71 TON MECHANICAL IRONWORKER,
S/N 135/7898/13, Shearing Capacity, 5" x 5" x 1/2" Angle, 2" Round, 71 Ton Punch
1 – CINCINNATI MODEL 210-12 400 TON X 18' MECHANICAL PRESS BRAKE,S/N 24305, 149.5" Between Housings, 39" Horn On Left Side Of Bed, UpperSegmented Die Holder, 5" Wide Lower Die Holder
1 – DREIS & KRUMP MODEL 6L8 55 TON X 8' MECHANICAL PRESS BRAKE, S/N L6570, 78" Between Housings, Manual Back Gage
1 – NIAGARA MODEL 812 1/4" X 12' MECHANICAL SHEAR, S/N 51492, 24" R.O.M.B.G, 9' Squaring Arm, (2) 30" Front Arm Supports
1 – NIAGARA MODEL L18 1/4" X 18' MECHANICAL SHEAR, S/N 51226, 36" F.O.P.B.G, (2) 10' Squaring Arms, (2) 40" Front Arm Supports
1 – CINCINNATI MODEL 1412 3/16" X 12' MECHANICAL SHEAR, S/N 24412, 24" R.O.M.B.G
2 – PEXTO MODEL 152K 16 GA. X 52" FOOT SHEARS, S/Ns 2/68, 4/67, (2) 24" FrontArm Supports
1 – TENNSMITH T52 16 GA. X 52" FOOT SHEAR, S/N 0783, (2) 24" Front Arm Supports
1 – PEXTO MODEL 196-A 18 GA. X 8' HYDRAULIC SHEAR, S/N K-5168, R.O.M.B.G,,(2) 28" Front Arm Supports
1 – PEXTO 16 GA. X 48" PLATE BENDING ROLL, S/N 51, 3" Dia. Rolls, Manual Drop End
1 – FARNHAM .060" X 144" FORMING ROLL, S/N 4-53-3
1 – NIAGARA 14 GA. X 60" PLATE BENDING ROLL, 4" Dia. Rolls, Manual Drop End
1 – WIEDEMANN MODEL R2 12-STATION MANUAL TURRET PUNCH, S/N 2458
1 – ERCO HYDRAULIC SHEET METAL STRETCHER, 76" x 100" Die Area, (7) Dies
2 – ERCO MODEL 1447 SHEET METAL SHRINKERS
1 – DREIS & KRUMP MODEL W38 10' X 14 GA. FINGER BRAKE, S/N 85180
1 – TENNSMITH MODEL HB121 10' X 16 GA. HAND BRAKE, S/N 0482
1 – TENNSMITH 8' X 18 GA. HAND BRAKE
1 – DREIS & KRUMP 8' X 18 GA. HAND BRAKE, S/N 90550
1 – CHICAGO PNEUMATIC MODEL CP-450 EA HOT DIMPLING MACHINE, S/N H-649481, 36" Throat, 110 Volt
1 – 72" X 168" X 6.5" THICK (ACORN STYLE) WELDING TABLE
JIg BORER & DRIll1 – PRATT & WHITNEY MODEL 3B JIG BORER, S/N M169521205,
24" x 56" Table, (12) Spindle Speeds 37-1800 RPM, 4-Axis D.R.O.
1 – CARLTON MODEL 3A 6' X 15" RADIAL ARM DRILL, S/N 3704,(36) Spindle Speeds 15-1500 RPM, Power Clamping, Power HeadTraverse, 24" x 30" x 24" High Tilting Box Table
lATHES1 – SIDNEY MODEL 1812 18" X 78" ENGINE LATHE, S/N 10174,
(16) Spindle Speeds 35-1404 RPM, 12" 3-Jaw Chuck, Taper, 460Volt
1 – SHARP MODEL 1860L 18" X 60" ENGINE LATHE, S/N 7908220(2008), (12) Spindle Speeds 20-1350 RPM, Inch & MetricThreading, 10" 3-Jaw Chuck, 2-Axis D.R.O., Foot Brake
1 – AMERICAN PACEMAKER 16" X 78" ENGINE LATHE,S/N 72456-51, (18) Spindle Speeds 17-1000 RPM, 12" 3-JawChuck, Taper, 460 Volt
1 – AMERICAN PACEMAKER 16" X 54" ENGINE LATHE, S/N 73085-52, (18) Spindle Speeds 17-1500 RPM, 10" 3-JawChuck, Taper, Coolant 460 Volt
1 – SHARP MODEL 1340VS 13" X 40" ENGINE LATHE, S/N 43388(2009), Variable Spindle Speed 40-2000 RPM, Inch & MetricThreading, 5C collet Closer, 2-Axis D.R.O., Foot Brake
MILLS • PRESSES • SAWS • TOOL GRINDERS
To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)6
MIllS1 – SACEM 4" TABLE TYPE HORIZONTAL BORING MILL, (24) Spindle Speeds 40 – 1250
RPM, Spindle 50 Taper, Travels, Vert. 40", Cross 28", Long. 60", 32" x 39.25" T-SlottedPower Rotary Table, 4-Axis D.R.O., Right Angle Head, 9.2 kw Spindle Motor, 240 Volt
1 – SUPERMAX MODEL SERIES II YC 2GS 5 H.P. HORIZONTAL/VERTICAL MILL, S/N 071059 (1981), 11" x 50" Table, Spindle Speeds, Horiz. (18) Speeds 49 – 1300 RPM,Vert. (20) Speeds 85 – 3200 RPM, 3-Axis D.R.O.
1 – KEARNEY & TRECKER MODEL 205 S-12 HORIZONTAL/VERTICAL UNIVERSALRAM TYPE MILL, S/N 2/9559, 12" x 56.5" Table, Spindle Speeds, Horiz. (24) Speeds 25– 2000 RPM, Vert. (8) Speeds 100 – 1600 RPM, Universal Right Angle Head, 50 Taper,travels, Long. 28", Cross 12", 440 Volt
1 – DEVLIEG MODEL 3B-48 JIG MILL, S/N 3-186, 30" x 48" T-Slotted Table, Vert. Travel36", (16) Spindle Speeds 25 – 1200 RPM, 40 Taper Spindle, 3-Axis D.R.O.
1 – CINCINNATI MODEL #5 VERTICAL MILLING MACHINE, S/N 3J5V5B-7, 20" x 94" Table,(24) Spindle Speeds 14-1400 RPM, 50 Taper, Travels, Long. 42", Cross 16", 460 Volt
6 – BRIDGEPORT MODEL SERIES I 2 H.P. VERTICAL MILLING MACHINES, S/Ns 450730688X, 247474, 247461, 247501, 247499, 247450, 9" x 42”/48" Table w/ Power Feed, Spindle Speeds 60-4200 RPM, R8 Spindle Nose, 3-Axis D.R.O.
PRESSES1 – BLISS 2500 TON, 6-POST HYDRAULIC PRESS, S/N 5191 / 120416, (5) Shuttle Tables,
(6) 46" Wide Openings Between Post,
1 – VERSON MODEL 200-S2-60 200 TON SSDC PRESS, S/N 9236, 18" Stroke, 32" ShutHt., 8" Slide Adjustment, 60" x 42" x 5" Bolster, 19" Windows, Air Clutch
1 – OTC 50 TON HYDRAULIC H-FRAME SHOP PRESS, 43" Between Housings
1 – NIAGARA MODEL A3 32 TON OBI PRESS, S/N 29593, 15" x 23.5" Bed Area,Mechanical Clutch
1 – NIAGARA MODEL A2 18 TON OBI PRESS, S/N 29139, 10" x 15.5" Bed Area,Mechanical Clutch
1 – GREENERD MODEL H-57-D HYDRAULIC ARBOR PRESS, S/N 514989
5 – 12 TON ARBOR PRESSES: (3) Greenerd Model 5S, Dake Model 401A, Famco Model 5CR
SAwS1 – MODEL V-4012 40" VERTICAL BAND SAW, S/N
931093, 29.5" x 27.5" Table, Blade Welder, 220/440 Volt
1 – TANNEWITZ MODEL GV-1 36" VERTICAL BANDSAW, S/N 11263, 37" x 36" Table
2 – JET MODEL VBS-2012 20" VERTICAL BAND SAWS,23.5" x 22" Table, Blade Welder
1 – MARVEL MODEL 8 MK-1 18" X 20" VERTICAL BANDSAW, S/N 822003-W, 460 Volt
1 – DAYTON MODEL 6Y942D 18" VERTICAL BAND SAW,18" x 19.5" Table
1 – POWERMATIC MODEL 143 14" VERTICAL BANDSAW, S/N 2-456, 15" x 15" Table
1 – DELTA MODEL 28-203 14" VERTICAL BAND SAW,S/N 99F84945, 14" x 14" Table, 110 Volt
2 – DAYTON MODEL 6A489A BAND SAW BLADEWELDERS
TOOl gRINDERS1 – GRAND RAPIDS NO. 62 TOOL & CUTTER GRINDER,
S/N 62044, 6" x 42" Table, K.O. Model B 3043 5C ColletWork Head, 460 Volt
1 – PRATT & WHITNEY MODEL R-8 TOOL & CUTTERGRINDER, 6.5" x 11" Table, 460 Volt
1 – CINCINNATI NO. 2 TOOL & CUTTER GRINDER, S/N1D2T1Z-268, 5.25" x 36" Table, (2) Collet Fixtures, 460 Volt
1 – HARIG MODEL STEPTOOL TOOL & CUTTERGRINDER, 5.25" x 26" Table, 5C Collet Fixture, 208 Volt
1 – STERLING TOOL & CUTTER GRINDER, 5" x 36" Table,K.O. Model B 3043 5C Collet Work Head, 208 Volt
1 – SELLERS MODEL 6GA DRILL GRINDER,S/N 58R1401-2
TUBE BENDERS • END FINISHERS • INSPECTION • PLANT SUPPORT
For more information, please visit us on the web at www.hilcoind.com 7
INSPECTION1 – JONES & LAMSON PC-14A 14" OPTICAL COMPARATOR
4 – ROCKWELL HARDNESS TESTERS, Models 3JR, 3JS, 4JR,4JR BB
1 – TINIUS OLSEN HARDNESS TESTER
3 – DOALL 48" X 96" X 14" THICK GRANITE SURFACE PLATES
2 – PRATT & WHITNEY G-2100 SUPER MICROMETERS
LARGE QUANTITY OF INSPECTION TOOLS, Including:Vernier Calipers, Micrometers, Height Gages, Pin Gages, DialIndicators, Depth Gages & Precision Levels, Etc.
PlANT SUPPORT1 – JLG MODEL E400A ELECTRIC ARTICULATING BOOM
LIFT, S/N 0300074600 (2004), Max. Lift Ht. 40', Max. Horiz.Reach 21.2', 48 Volt, Weight Cap. 500 lb.
1 – TEREX MODEL 41/24 ARTICULATING BOOM LIFT,S/N DCAV05305, Max. Lift Ht. 41', Max. Horiz. Reach 24',Propane/Gas, Weight Cap. 500 lb.
1 – CROWN 2500 LB. STAND UP LIFT TRUCK, S/N 1A172667,190" Lift, 36 Volt
1 – SKYJACK MODEL SJIII 4626 ELECTRIC SCISSOR LIFT,S/N 709260 (2003), 24 Volt
1 – INGERSOLL RAND 15 H.P. ELECTRIC TRAILER MOUNTEDAIR COMPRESSOR, (2) Surge Tanks
1 – CHICAGO PNEUMATIC MODEL CP 185 GASOLINETRAILER MOUNTED AIR COMPRESSOR
1 – SPECTRUM TECHNOLOGIES MODEL C50-200 WIRELASER MARKING MACHINE, S/N C50142 (2002)
1 – AIRFLOW SYSTEMS MODEL PCH1-BI-AP1-PG6PORTABLE DUST COLLECTOR (2005), 115 Volt
3 – HYDRAULIC DRUM COMPACTORS
LARGE QUANTITY OF MACHINE SHOP SUPPORT EQUIPMENT, Including: Machine Vises, Lathe Chucks, ToolHolders, Tooling, Press Brake Tooling, Rotary Tables, AnglePlates & Set Up Blocks, Vidmar Cabinets, Pallet Racking, WorkBenches, Shop Carts, Vises, Shop Fans, Fire Proof Cabinets,Double End Grinders, Disc Grinders, Drill Presses, WoodworkingTools, Pneumatic Tools & Pallet Jacks, Etc.
TUBE BENDERS & END FINISHERS 1 – LEONARD MODEL PBHD PNEUMATIC MANDREL TYPE
TUBE BENDER, S/N 587, Clockwise Rotation, 10-PositionTurret Degree Of Bend Selector
1 – LEONARD MODEL PBHD PNEUMATIC MANDREL TYPETUBE BENDER, Clockwise Rotation
1 – LEONARD MODEL 5CP 5" TUBE END FINISHER, S/N 1141
5 – LEONARD 3" TUBE END FINISHERS, (4) Model 3CP HD,S/Ns 2842, 2835, 2841, 2841, (1) Model 3CP VD, S/N 954
1 – VAILL MODEL NO. 7 3.5" HYDRAULIC TUBE END FOR-MER, S/N 7-40
1 – OLSEN MODEL 20 HD TUBE END FORMER, S/N 3439
OvENS & FURNACES1 – LINDBERG MODEL G 183618 A HEAT TREAT FURNACE,
S/N 10529, Max. Temp. 2500° F, Chamber Area 18" x 36" x18", 96-240 Volt 2-Phase
1 – LINDBERG MODEL RO-364824-A HEAT TREAT FURNACE,S/N 10528, Max. Temp. 2000° F, Chamber Area 36" x 48" x 24,230 Volt 3-Phase
1 – TRENT HEAT TREAT FURNACE, S/N 889-932, Max. Temp.1400° F, 208 Volt 3-Phase
1 – AJAX SALT BATH FURNACE, S/N 2392, (2) 100 kw PowerSupplies, Approx. Chamber Opening 48" x 16'
1 – AJAX MODEL D-4330 SALT BATH FURNACE, S/N 2124-A
1 – BELL & GOSSETT MODEL Q 7446 350 GALLON QUENCHTANK, S/N 399241, w/ SC-30 Cooler, Tank Dimensions 48" x48" x 36" Deep, (2) 32" x 48" x 36" Deep Water Dip Tanks
3 – DESPATCH MODEL RS-5-S ELECTRIC BATCH OVENS,S/N 64921, N/A, Max. Temp. Up to 650° F, (2) 54" L-R x 70"High x 108" Deep, (1) 72" L-R x 78" High x 108" Deep
1 – STEELMAN INDUSTRIES MODEL 8812 GSP BATCH OVEN,S/N P980101, Max. Temp. 500° F, 600,000 BTU/HR, ChamberArea 95" W x 140" D x 96" H
Partial Listing Only, Please Visit Our Website
www.hilcoind.comFor Complete Lot Catalog
HILCO Industrial is a division of Hilco Global • Headquarters 5 Revere Drive, Ste. 206 • Northbrook, IL 60062 • All rights reserved
Hilco Industrial, LLC Alabama Auctioneer & License: Tim Pfister License #5251 • AL License #C-62 • IL License #444.000215
Printed in USA • KAI3352 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.
FollowUs on:
A Hilco Global Company
Vested in Your Success
OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA
HilcoTM Industrial ONLINE AUCTIONTerms of Sale
An 18% buyer's premium will be charged on all assets.The buyer’s premium will be reduced to 16% for paymentsmade by means of cash, cashier’s check, company check(with bank letter of guarantee) or wire transfer within 48hours of sale close. Everything will be sold online to thehighest bidder for cash, in accordance with theAuctioneer’s customary “Terms of Sale”, copies of whichwill be posted online. All items will be sold “as is, where-is” without any warranties, expressed or implied. Althoughobtained from sources deemed reliable, the Auctioneermakes no warranty or guarantee to the accuracy of theinformation herein contained. Bidders are encouraged tothoroughly inspect the items on which they intend to bidprior to sale. Absolutely no items will be removed until theday after the conclusion of the sale and payment is madein full. Subject to additions, deletions and prior sale. Forupdated information, please visit our website atwww.hilcoind.com for any date, sale process, terms andconditions and list of available assets.
Payment: INVOICES WILL BE EMAILED WITHIN 24 HOURSAFTER THE AUCTION CLOSES. Payment is to be made toHilco Industrial, LLC. Payment Options: VISA, MastercardDiscover accepted – if invoice total is $2,000 or less; WireTransfer; Certified Check; or Company Check (with Bank let-ter of guarantee – see sample letter below). All sales are sub-ject to sales tax. Purchasers claiming exemptions from taxesmust provide proof satisfactory to the Auctioneer of their enti-tlement to claim such exemptions. Please see complete termsand conditions on our website, www.hilcoind.com.
Sample Bank letter(Bank Name) unconditionally guarantees payment to Hilco Industrial from (Company Name). This guarantee will be valid for purchases made at theAuction of Kaiser Aircraft Industries Inc. on October 28-30, 2014.
FORMER AIRCRAFT MAINTENANCE ANDREPAIR SHOP
Including MRO for Aircraft Models C-130, C-12, RC-12, UC-35, C/KC-135, & P-3 – For Over 80 Years
Assets no longer necessary
in the continuing operations of
Over 3000 Lots
Online Bidding Closes: Tuesday thru Thursday, October 28
th– 30
th
Birmingham, Alabama
