PLUMBING PRODUCTS - Pentair Aquatic Eco-Systems...facilities in the retail and wholesale aquarium trade, research and grow-out aquaculture operations, and biomedical research facilities

Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788

PRODUCTS399 Garden Hose/Accessories401 Hose/Clamps/Flow Indicators402 Valves409 Well Screens410 Plugs/Couplings / Caps411 Tank Fitting Kits/Drains412 Screens/Strainers/Foot Valves413 Pipe Cutters/Holesaws/Cable Saw/Drill Bits414 Bulkhead Fittings415 Uniseal416 Pipe Hangers/Supports/Clamps/PVC Pipe417 Tubing418 Pipe/Fittings/Tubing420 Adapters/Fittings421 Reducers422 Brass Adapters/Modular Piping/Taps/Drill Bits423 Quick Disconnect Fittings424 Lubricants/Sealants425 Tees/Crosses/Adapter Inserts426 Ells/Nipples427 Unions/Plug/Long Sweep/Reducer Bushing428 Bushings/Couplings/Adapters429 Wrench/Rubber Sheet/File/Flanges/ Gaskets/Bolt Sets

PLUMBING

Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788

ADJUSTABLE BRASS NOZZLEMade of heavy solid brass, this rugged nozzle is fully adjustable from fine mist to full stream. It features a self-rising stem and is designed to last a lifetime!

JET SPRAY NOZZLEThis solid-stream, brass jet nozzle is ideal for walkways, sidewalks and driveways.

SALTWATER NOZZLEThis nozzle is specially designed to resist the corrosion caused by salt water. The durable polymer body includes an internal spring mechanism of stainless steel. Leakproof and threaded at both ends.

Flexogen® is a registered trademark of Robert Bosch Tool Corp.

COMFORT GRIP NOZZLE TECH FAV

• Molded-on vinyl grip is cushioned.• Male hose threaded front for attaching accessories.• Solid brass valve stem with adjusting nut.• Hold-open clip for continuous spraying.• Stainless steel spring.• Heavy-duty, full-size, diecast zinc body.

POLYPROPYLENE DELIVERY NOZZLEWant an easy way to fill up water tanks? This handy delivery nozzle is excellent for delivering fresh or salt water to jugs, tanks and other containers in labs, hatcheries and even aquarium stores. Nozzle body is polypropylene, lever is stainless steel. 1” FNPT inlet.

PREMIUM DUTY WATER HOSEGilmour Flexogen® water hose has a robust double polyester cord reinforcement and high burst-strength construction up to 500 PSI. The Flexogen Advantage construction provides superior flexibility and all-weather performance with a protective collar to resist kinks at the faucet and crush-resistant heavy-duty metal couplings with O-rings for a durable and tight seal. Lifetime Warranty. Made in USA. SHIP WT MODEL LENGTH DIA. (LBS) EACHH10050 50’ 5⁄8” 8 $38.95H10075 75’ 5⁄8” 12 56.74H10100 100’ 5⁄8” 16 73.59

MEDIUM-DUTY WATER HOSEGilmour medium-duty water hose is lightweight yet durable with a burst strength of 250 PSI. The Flexogen Advantage construction delivers flexibility and kink resistance, while the crush-resistant Full-Flo® metal couplings with washers provide a durable and tight seal. The hose features a polished surface to resist dirt-collecting abrasions. Five-year warranty. Made in USA. SHIP WT MODEL LENGTH DIA. (LBS) EACHMD58025 25’ 5⁄8” 3 $14.95MD58050 50’ 5⁄8” 5 18.95MD58075 75’ 5⁄8” 9 31.95

HOT WATER HOSEGilmour Flexogen® hot water hose withstands hot water up to 200° F. yet weighs 33% less than traditional rubber hose. Withstands pressure up to 400 PSI. The Flexogen Advantage construction provides superior flexibility and all-weather performance with a protective collar to resist kinks at the faucet and crush-resistant heavy-duty metal couplings with O-rings for a durable and tight seal. Lifetime Warranty. Made in USA. SHIP WT MODEL LENGTH DIA. (LBS) EACH

HW58050 50’ 5⁄8” 8 $74.95

STAINLESS STEEL WATER NOZZLESHeavy-Duty stainless steel nozzle with rear trigger. Stainless steel coupling and tip for the ultimate in corrosion resistance, impact resistance, durability and quality. Slip-resistant and ergonomic design. Adjustable water flow for improved control. Hold open clip for continuous spray. Pattern nozzle has spray patterns that include clean, soft wash, jet, flower, sweep, garden, rinse, and shrub. Adjustable tip nozzle alters the water stream from jet to wide stream. Lifetime Warranty. SHIP WT MODEL NOZZLE TYPE (LBS) EACH

N400GWR SPRAY PATTERN 0.8 $15.95 N400GCR ADJUSTABLE TIP 0.9 14.95

HOT WATER/HIGH PRESSURE WATER NOZZLEThis industrial spray nozzle is designed to handle the toughest cleaning jobs. With heavy-duty construction and insulating soft-grip over-molds, it is designed for hot water use and/or high pressure levels. Heavy duty die-cast zinc with brass spray tip. Handles up to 200 PSI. Ergonomic curved shape for comfort during use. Adjustable tip alters the water stream. SHIP WT MODEL NOZZLE TYPE (LBS) EACH

N50500GP ADJUSTABLE TIP 0.6 $7.95

LIFETIME WARRANTYN400GWR N400GCR

5-YEAR WARRANTY

LIFETIME WARRANTYLIFETIME WARRANTY

MODEL EACH 4+

NZ23 $3.50 $3.14

MODEL EACH 4+

NZ474 $4.15 $3.73

MODEL EACH 4+

NZ93 $7.50 $6.75

MODEL EACH

NZ35 $52.31MODEL EACH

NZ22 $8.47

399PLUMBINGGarden Hose/Nozzles


HOSE HANGER SYSTEM The UnReel® is a simple solution for attractive and efficient hose storage and use. Easily mounted, with hardware and mounting template included, the jaw pivots down from its vertical storage position to play out just the length required, one loop at a time, with no kinks. It also pivots side-to-side to feed hose to you. After use, simply return the jaw to its vertical position and feed the hose back into the jaws one loop at a time. Handles up to 100’ of 5⁄8” or 75’ of 3⁄4” hose (not included).

GARDEN HOSE MENDERS AND COUPLINGSPremium nylon construction for maximum strength and durability. Impact resistant clamp design. Noncorroding, high-grade, stainless steel screws will not strip when tightened. Reusable and leakproof. For garden hose and vinyl tubing with I.D.

GARDEN HOSE ACCESSORIESMODEL EACH 12+

3110-AQ PLASTIC HOSE SHUT-OFF $1.97 $1.553194 PLASTIC HOSE END CAP, 2/PK .65 .483150 PLASTIC "Y" CONNECTOR W/SHUT-OFF 3.40 2.76TVW 76# WASHERS, 100/PK 6.67 —

GARDEN HOSE ADAPTERSThese natural nylon adapters convert garden hose thread (GHT) to standard national pipe thread (NPT) or to barb fittings. NPT is used with most PVC fittings. Follow part number with “A” for 1⁄2” NPT or “B” for 3⁄4” NPT

KINK PROTECTOR• Coiled spring faucet extension with solid brass couplings.

• Protects hose and prevents kinks at faucet.

• Allows hose to bend at sharp angle and maintain even water flow.

MODEL HOSE I.D. EACH

HM22 HOSE MENDER 5⁄8", 3⁄4" $2.71HM23 HOSE MENDER 7⁄16", 1⁄2", 9⁄16" 2.71HM34 FEMALE COUPLING 5⁄8", 3⁄4" 1.72HM35 FEMALE COUPLING 7⁄16", 1⁄2", 9⁄16" 1.72HM46 MALE COUPLING 5⁄8", 3⁄4" 1.54HM47 MALE COUPLING 7⁄16”, 1⁄2”, 9⁄16” 1.54

HM34

HM22

HM46

3150

3110

31943194

MODEL EACH 10+

GH2 (A or B) MALE GHT X MALE NPT $1.25 $1.04GH3 (B Only) FEMALE GHT X MALE NPT 1.38 1.15GH4 (A or B) MALE GHT X FEMALE NPT 1.43 1.19GH5 MALE GHT X 1⁄4" BARB 1.17 .97GH6 MALE GHT X 3⁄8" BARB 1.17 .97

GH3AGH2A GH4A

PVC SADDLEOur straight PVC saddle is easy to install. Just drill a 3⁄8” hole into 1⁄2” PVC pipe and secure the saddle in place with PVC glue. 1⁄8” FNPT threads.

MODEL EACH 100+

VS1 STRAIGHT SADDLE $1.35 $1.15

VS1 W/VBR12

The UnReel® is a registered trademark of Ultimate Tool Group.

MODEL EACH

HR33 $14.45

MODEL EACH

KP5 $9.30

400 PLUMBINGGarden Hose Accessories

2-YEAR WARRANTY


PLUMBINGHose/Clamps/Flow Indicators

401

STAINLESS STEEL HOSE CLAMPSYou can find clamps for less, but then they must be replaced when the screw rusts away. These quality clamps are all stainless steel (#301SS band) including the screw (#410SS)! The one-piece housing is locked to the band without spot welds. The band is 9⁄16” wide (5⁄16” on SSAA) and the screw has both a slotted head and a 5⁄16” hex. Choose clamps with a larger maximum diameter than the outside diameter (O.D.) of the tubing that it will be holding. Made in USA.

DIAMETER

MODEL SIZE MINIMUM MAXIMUM EACH 10+

SSAA 1⁄4" 0.22" 0.62" $1.02 $.94

SSA 1⁄2" 0.38" 0.88" 1.25 1.16

SSB 3⁄4" 0.50" 1.06" 1.30 1.22

SSC 1" 0.75" 1.75" 1.40 1.34

SSD 11⁄4" 1.00" 2.00" 1.40 1.34

SSE 11⁄2" 1.25" 2.25" 1.45 1.37

SSF 2" 1.50" 2.50" 1.60 1.51

SSG 21⁄2" 2.25" 3.25" 1.75 1.60

SSH 31⁄2" 2.50" 4.50" 1.75 1.60

SSI 4" 3.00" 5.00" 2.05 1.82

SSJ 5" 4.50" 6.50" 3.25 2.95

SUCTION/DISCHARGE HOSEThis PVC hose is externally ribbed with smooth inside surfaces. It weighs about half that of rubber suction hose. Rated at 28” Hg vacuum at 68ºF. Its small bend radius (see below) and high strength will give reliable service for pumping, siphoning, fish hauling, etc. Full rolls are 100 feet.

ACTUAL MAX MINIMUM MAX* MODEL I.D. PSI BEND RADIUS LENGTH WT/FOOT (LBS)

SH4 11⁄2" 90 6" 100' 0.5 $2.82/FTSH5 2" 70 9" 50' 0.7 4.06/FTSH6 3" 60 13" 20' 1.3 6.76/FTSH8 4" 50 18" 8' 2.1 10.63/FT

SH9 6” 45 34” 8’ 4.5 13.75/FT

*Maximum per ground carton; 100’ Maximum by truck.

A502

DISCHARGE HOSEThis is a good quality, polyvinyl-coated discharge hose. It is UV-resistant for extra long life outdoors. It lies flat when not in use, which allows easy storage and handling. The maximum roll length is 300’, but we will cut it to any size for you.

MODEL SHIP WT PER 100’ EACH

A50112 11⁄2" 16 LBS $ .90/Ft

A502 2" 23 LBS 1.16/Ft

A503 3" 39 LBS 1.70/Ft

A504 4" 52 LBS 1.89/Ft

A506 6" 68 LBS 3.58/Ft

FLOW INDICATORSThis polystyrene flow indicator provides an immediate visual indication of water, air or gas flow. Minimum flowrate with air is .1 cfm mounted horizontally, .28 cfm mounted in a vertical position. Minimum flowrate with water to activate the ball is 50 mL/min mounted horizontally, 140 mL/min mounted in a vertical position. Max pressure 10 psi. Measures 39 mm x 57 mm, inlet/outlet barbs fit 1⁄4" to 3⁄8" I.D. tubing.

MODEL EACH 4+

FW1 $25.92 $23.07

Abby WalkerAbby received her Master of Science from the University of New Hampshire in Zoology with research focused on nutrition, larviculture, and grow-out of coldwater finfish in recirculating systems. She has a broad range of work experience in aquatics facilities in the retail and wholesale aquarium trade, research and grow-out aquaculture operations, and biomedical research facilities. At Pentair, Abby has served our zebrafish and Xenopus research clients with on-site service, technical support, and training since 2010.

TECHNICIAN PROFILE


402 SECTIONProducts / Products / Products

PLASTIC NEEDLE VALVEThese needle valves are small gate valves designed for applications where accurate flow is required. Valves have a barb inlet/outlet.

MODEL FOR TUBING EACH 10+

NV14 1⁄4" I.D. $12.20 $10.97

NV38 3⁄8" I.D. 12.20 10.97

NV12 1⁄2" I.D. 11.85 10.66

RC9

VP31VP31

BRASS BALL VALVES These top-quality ball valves feature corrosion-resistant, chrome-plate balls and PTFE seals for years of high-temperature easy, operation. The body is LA 377 brass forging. Plated steel handle with vinyl grip.

MODEL FOR TUBING EACH

VBB2 1⁄2" FNPT $12.00

VBB3 3⁄4" FNPT 17.93

VBB4 1" FNPT 28.74

VK2

VBB2

SPIGOT VALVE Barb accepts 5⁄8” I.D. flexible tubing. Polyethylene.

MODEL EACH 10+

TV1 1⁄2" MPT $12.20 $10.92

TV2 3⁄4" MPT 14.32 12.88

TV1

MV6

DC9

NV14

PV5USE FOR WATER TO 100 PSI.

VALVE MANIFOLDS, LARGE The PVC globe valves are glued together as manifolds to save you time. Each valve will pass 2 gpm with less than 1 psi pressure loss. These PVC valves have 1⁄2” FNPT outlets. The manifold ports are 1⁄2” FNPT and a threaded plug is included, which may be removed for another connection.

MODEL OAL EACH 4+

PV2 2-VALVE 8" $27.49 $25.57

PV3 3-VALVE 11" 42.52 39.54

PV4 4-VALVE 14" 48.26 44.88

PV5 5-VALVE 17" 54.80 53.03

PV6 6-VALVE 20" 66.11 63.98

VALVE MANIFOLDS, MEDIUM Our valve manifolds will save you time and aggravation. They are made with quarter-turn valves (BV25). The manifold ports are 1⁄2” FNPT and a 1⁄2” FNPT plug is included. Each valve is 1⁄4”FNPT.Each valve will pass 1⁄2 gpm with less than 1 psi pressure loss. They also make excellent manifolds for air distribution. The 1⁄2” threaded plug may be removed for another connection.

MODEL OAL EACH 4+

MV2 2-VALVE 8" $24.74 $22.27

MV3 3-VALVE 11" 28.73 25.86

MV4 4-VALVE 14" 35.68 32.11

MV5 5-VALVE 16" 45.35 40.82

MV6 6-VALVE 18" 52.36 47.12

MSK558

MSK714

MSK610MSK816

MINIATURE STOPCOCKSFor low-pressure air and water.


MSK558 5⁄16" $2.03 $1.73

MSK610 3⁄8" 2.07 1.76

MSK714 1⁄2" 2.44 2.07

MSK816 5⁄8" 2.44 2.07

HOSE VALVEEasily turned handle. Rated up to 45 psi at 100ºF (38ºC).


70012 1⁄2” I.D. $6.75

DRIP EMITTERThese emitters have an infinite adjustment up to 2 gph, and screw in with a 10⁄32” thread. The emitter screws into the riser tube or 3⁄16” tubing. See Index for riser tube.

MODEL EACH 50+

42115-AQ $1.60 $1.28

TUBING VALVESRoll typeRC9 and RC10 are made of polyester (PBT) that offers permanent rigidity and stiffness even in high-humidity areas. Infinite variable flow. Easy one-hand operation. No metal parts. Chemical and temperature resistant. No corrosion. Ideal for continuous, long-term use for air or water. Autoclavable to 320ºF (160ºC).


RC9 1⁄8" TO 7⁄16" I.D. $7.58 $6.82

RC10 1⁄4" TO 9⁄16" I.D. 8.43 7.59

TUBING VALVESClamp TypeManufactured of tough plastic without sharp edges. DC9 is an “on/off” valve only. The DC10 and DC11 have a 12-position ratchet control. Accurate and economical.


DC9 UP TO 1⁄4” I.D. $.22

DC10 1⁄8” TO 3⁄8” I.D. .87

DC11 UP TO 3⁄4” I.D. 2.69DRUM FAUCETHere is a very low-cost polyethylene valve that can be used in low-pressure applications. Two-piece construction, 3⁄4” MNPT threads.

MODEL EACH 25+

DV34 $3.45 $2.92

GATE AND GLOBE VALVESPreferred where fine adjustments to flow are needed. acetal resin (plastic) valves may be used for air or water at -20 to 180ºF and up to 100 psi. The no-kink style has a MNPT on its base and garden hose threads on the outlet. The VP31 is white PVC (not rated for compressed air) with slip sockets and glues onto 3⁄4” PVC pipe. All others are threaded. Washerless. Made in USA.


VC2 PLASTIC 1⁄2" FNPT GATE VALVE, STRAIGHT $5.95

VC3 PLASTIC 3⁄4" FNPT GATE VALVE, STRAIGHT 5.95

VP31 PVC 3⁄4" SLIP VALVE, STRAIGHT 5.80

VK2 PLASTIC 1⁄2" MNPT VALVE, NO-KINK 5.00

VK3 PLASTIC 3⁄4" MNPT VALVE, NO-KINK 5.25

402 PLUMBINGValves

VC2


Electric Actuator6" & 8"Valve

Asahi/America® is a registered trademark of Asahi/America, Inc.

SBW12

262205

1

2 3

Inlet

ACTUATED BUTTERFLY VALVES The 11⁄2” through 4” electric actuators are housed in a NEMA 4X box. They have a 5-second opening or closing time. They are 115V, 50/60 Hz, 15 amps, single-pole, with double-throw switches and a 1/2” conduit connection. The 6” and 8” actuators are similar but feature die-cast aluminum housings and a valve opening speed of 10–25 seconds. Valves with actuators come fully assembled and tested.The pneumatic actuators are of the air-to-spring variety and they require a minimum of 60 psi and a maximum of 120 psi. Springs are adjustable for different air pressures.

BUTTERFLY VALVES Asahi /America® butterfly valves are known for their high quality, high strength and positive closure. They are made of PVC, polypropylene and stainless steel and feature a notched gauge plate which allows more accurate judging of the percentage of opening. Fit US standard flanges (see Index for flanges). Each of the butterfly valves can be coupled to either electric or pneumatic actuators.

ECONOMY BALL VALVESLow-cost yet heavy-duty Schedule 40 ball valves. They have EPDM seats and seals, rated at 150 psi, with full port flow openings. To order valves with threads, add “T” after the part number. Imported.

MODELSLIP OR

THREADEDSHIP WT

(LBS) EACH 10+

SBW12 1/2" 1 $3.20 $3.03

SBW13 3/4" 1 3.60 3.39

SBW14 1" 1 4.70 4.44

SBW15 11⁄4" 1 6.55 6.14

SBW16 11⁄2" 1 10.35 9.73

SBW17 2” 2 12.92 12.13

SBW18 3" 6 49.95 46.92

SBW19 4" 10 81.55 76.75

BALL VALVES TECH FAV

These high-quality ball valves are offered at an unbelievable price! They feature PTFE ball seats and EPDM O-rings. The valves are very easy to turn. Maximum 150 psi rating. Certified by NSF for potable water use. Add a “T” after part number for threaded valves.

MODELSLIP OR

THREADEDSHIP WT

(LBS) EACH 10+

2622005 1⁄2" 1 $5.58 $5.02

2622007 3⁄4" 1 6.61 5.95

2622010 1" 1 8.84 7.96

2622012 11⁄4" 1 14.33 12.90

2622015 11⁄2" 1 17.74 15.97

2622020 2" 2 22.19 19.97

AIR PURGE VALVE, HIGH FLOWPrevents gas bubble diseaseInstall at high points in an aquaculture pressurized water system where air accumulates. Water pressure automatically forces air out, and when water reaches the valve, the internal float creates a watertight seal. Must be mounted vertically. Seals from 2 to 100 psi. Under suction, the valve functions as a vacuum breaker. 1” FNPT threads, measures 51⁄4” H x 2” in diameter. Air discharge rates (cfm): 60 @ 12.5 psi, 100 @ 25 psi and 180 @ 50 psi.

3-PORT VALVEAllows proportional flowOne 3-way valve can take the place of three regular valves in some situations. This unit can be disassembled for cleaning and fits 11⁄2” and 2” PVC pipe (11⁄2” slips into valve sockets, 2” pipe requires couplings or bell ends). The inlet is always open. The handle position closes sides 1 or 3. When in position 2, none is closed. Made in USA.

AIR PURGE VALVEThis brass valve has an internal float that closes the valve when filled with water. Use it to automatically purge air from a water tank, pipe system, oxygen saturator, etc. Mount it vertically wherever air collects. Also works as a vacuum breaker. 1⁄4” MPT. 1⁄4”poly plug included. 3” OAL.

MODEL EACH 4+

ST5 $21.25 $19.12

MODEL EACH 4+

SV300 $43.10 $39.66

MODEL EACH 4+

ST4 $16.06 $14.09

Electric Actuator11⁄2"–4"

VALVES ONLY VALVES W/ELECTRIC ACTUATOR VALVES W/PNEUMATIC ACTUATOR SIZE MODEL SHIP WT (LBS) EACH MODEL SHIP WT (LBS) EACH MODEL SHIP WT (LBS) EACH

11⁄2” BV115 3 $157.14 BV115E 6 $1,034.04 BV115N 7 $748.212” BV200 3 164.29 BV200E 7 1,046.27 BV200N 7 763.303” BV300 4 195.00 BV300E 8 1,064.64 BV300N 14 883.904” BV400 5 257.00 BV400E 9 1,225.69 BV400N 15 922.446” BV600 13 332.31 BV600E 23 2,167.09 BV600N 49 1,374.198” BV800 23 575.11 BV800E 33 2,674.69 BV800N 95 3,346.99

Pneumatic Actuator

403PLUMBINGValves



KEYSTONE COMPOSEAL RESILIENT SEATED BUTTERFLY VALVES WAFER STYLEResilient seated butterfly valves with valve body and disc in high engineered composite material providing excellent internal and external chemical resistance.Since the entire valve exists of high engineered composite materials, it is perfectly suited for a wide range of applications such as; building services, hot water applications, industrial waste water and industrial water treatment like purification, ozone or demineralization.The light weight valve can be perfectly used in transportation and cargo containers and in applications using metal, plastic or glass reinforced pipe lines.

Features• Wafer style body and disc in high engineered composite results in excellent

internal and external chemical resistance.• Light weight construction results in lower cost and simplified installation.• No extra pipe support needed when installed in plastic or GRP piping.• Disc in high engineered composite material provides excellent

corrosion resistance.• All fasteners in stainless steel 316 as standard.• Bubble tight shut-off in both directions, in accordance with EN 12266-1

leakrate A.• Pressure range up to PN 16 at elevated temperature.• Valve can be used in high line velocity applications up to 40 ft/sec.• Spindle and primary valve seals are not influenced by the flange bolting force

or pipe flange type.• High Cv value.• No need for flange gaskets.• Primary stem sealing exceeds the pressure rating of the valve and prevents

leakage through the shaft area to atmosphere.• A secondary (shaft) sealing provides back-up safety.• Four integrated locating holes ease installation and centering between the

pipe flanges.• Actuator flange acc. ISO 5211.• Sustainable production philosophy as the valve materials are

100% recyclable.• Use of composite material eliminates the need for machining and painting.• Composite hand lever available.• Available water approvals: KIWA, ACS, WRAS, NSF, BELGAQUA.• Certified and approved according Det Norske Veritas (DNV).

Gear Operated - Hand WheelMODEL MM INCH EACH

CSW100442WM1GO 100 4 WAFER, TRIM 442 COMPOSITE/EPDM WA3 DN 100 / GEAR OP. $540.00CSW125442WM1GO 125 5 WAFER, TRIM 442 COMPOSITE/EPDM WA3 DN 125 / GEAR OP. 540.00CSW150442WM1GO 150 6 WAFER, TRIM 442 COMPOSITE/EPDM WA3 DN 150 / GEAR OP. 665.00CSW200442WM1GO 200 8 WAFER, TRIM 442 COMPOSITE/EPDM WA3 DN 200 / GEAR OP. 830.00CSW250442WM1GO 250 10 WAFER, TRIM 442 COMPOSITE/EPDM WA3 DN250 / GEAR OP. 1,270.00CSW300442WM1GO 300 12 WAFER, TRIM 442 COMPOSITE/EPDM WA3 DN300 / GEAR OP. 1,610.00

Lever HandleMODEL MM INCH EACH

CSW050442WM1LHE 50 2 WAFER, TRIM 442 COMPOSITE/EPDM WA3 DN 050 / FIG 419 LEVER $170.00CSW065442WM1LHE 65 2.5 WAFER TRIM 442 COMPOSITE/EPDM WA3 DN 065 / FIG 419 LEVER 210.00CSW080442WM1LHE 80 3 WAFER TRIM 442 COMPOSITE/EPDM WA3 DN 080 / FIG 419 LEVER 225.00CSW100442WM1LHE 100 4 WAFER, TRIM 442 COMPOSITE/EPDM WA3 DN 100 / FIG 419 LEVER 260.00CSW125442WM1LHE 125 5 WAFER, TRIM 442 COMPOSITE/EPDM WA3 DN 125 / FIG 419 LEVER 320.00CSW150442WM1LHE 150 6 WAFER, TRIM 442 COMPOSITE/EPDM WA3 DN150 / FIG 419 LEVER 370.00

Integrated ISO 5211 top plate.

Integrated flange sealing.

Spherical disc edge.

Smooth Composite body surface eliminating the need to apply paint.

Primary body split sealing.Secondary body split sealing.

Thin disc profile resulting in high Cv values.

Four body locating holes on all sizes.

Gear Operated Lever Operated

404 PLUMBINGValves


MODEL EACH

1605005 1⁄2” TYPE-21 BALL VALVE PVC/FKM SOCKET/THREADED COMBO $25.951605007 3⁄4” TYPE-21 BALL VALVE PVC/FKM SOCKET/THREADED COMBO 31.951605010 1” TYPE-21 BALL VALVE PVC/FKMSOCKET/THREADED COMBO 39.951605012 11⁄4” TYPE-21 BALL VALVE PVC/FKM SOCKET/THREADED COMBO 49.951605015 11⁄2” TYPE-21 BALL VALVE PVC/FKM SOCKET/THREADED COMBO 68.951605020 2” TYPE-21 BALL VALVE PVC/FKM SOCKET/THREADED COMBO 83.951613015 11⁄2” TYPE-21 BALL VALVE CPVC/FKM SOCK X THRD 89.951609020 2” TYPE-21 BALL VALVE CPVC/EPDM SOCK X THRD 129.001607030 3” TYPE-21 BALL VALVE PVC/FKM THREADED 189.001607040 4” TYPE-21 BALL VALVE PVC/FKM THREADED 339.001606030 3” TYPE-21 BALL VALVE PVC/FKM SOCKET 189.001606040 4” TYPE-21 BALL VALVE PVC/FKM SOCKET 339.00

TYPE-21 BALL VALVE• Pressure rated up to 230 psi (PVC, CPVC, PVDF)• Double O-ring seals on stem for added protection• Full bore, sizes 1⁄2"–2"• Full vacuum rated, all sizes• Blocks in two directions, upstream and

downstream, leaving full pressure on the opposite end of the valve

• Integrally molded ISO mounting pad for both manual and actuated operations

• Integrally molded base pad to mount valves securely or panel mounting

• PTFE seats with elastomeric backing cushions ensure bubble-tight shut-off and a low fixed torque, while at the same time compensating for wear

• True Union design for easier installation or repairs without expanding the pipe system

• Built-in spanner wrench on the handle for valve disassembly and assembly

• Two sets of end connectors (socket and threaded) included with all PVC and CPVC valves in sizes 1⁄2"–2"

• CPVC threaded end connectors on sizes 1⁄2"–1" come with stainless steel reinforcing rings

• New PTFE Seat design—Facilitates easier field maintenance if required

• Tapered O-ring groove—Helps to Keep the end connector O-rings on the valve body during installation

• Body Flats—Flats have been added to either side of the valve body where a wrench can be applied to prevent the valve body from turning when the Union Nuts are tightened

OMNI BALL VALVE• Blocks in two directions• Rugged structure• Unibody construction• Compact, low profile, short

face-to-face dimensions• PTFE seat backed by EPDM for

low stem torque• Rated for full vacuum service

MODEL EACH

1070005 1⁄2” OMNI BALL VALVE PVC/EPDM SOCKET $16.501070007 3⁄4” OMNI BALL VALVE PVC/EPDM SOCKET 21.501070010 1” OMNI BALL VALVE PVC/EPDM SOCKET 25.501070012 11⁄4” OMNI BALL VALVE PVC/EPDM SOCKET 35.501070015 11⁄2” OMNI BALL VALVE PVC/EPDM SOCKET 45.501070020 2” OMNI BALL VALVE PVC/EPDM SOCKET 90.00

TYPE 57 BUTTERFLY VALVE• PVC Body and EPDM Seat PVC Disc • Our 316 stainless steel shaft has full engagement over the entire length of the disc and is a non-wetted

part, totally isolated from the media.• Only solid and abrasion-resistant plastic disc and elastomeric liner are wetted parts.• ISO bolt circle on top flange—no body or stem modifications required

for accessories.

MODEL EACH

3722030 3” PVC BODY & DISC EPDM SEALS LEVER-OP TYPE 57 BTRFLY $255.00

3722040 4” PVC BODY & DISC EPDM SEALS LEVER-OP BTRFLY 299.003722060 6” PVC BODY & DISC EPDM SEALS LEVER-OP BTRFLY 449.00

Asahi/America® is a registered trademark of Asahi/America, Inc.

405PLUMBINGValves



406 PLUMBINGBall Valves

2

1

3

Three-Way

Two-Way

TB2

SINGLE UNION BALL VALVES These high-quality ball valves allow disconnection of lines without fear of retainer-ring or ball moving. The retainer-ring is locked with two pins to the body. PVC with EPDM O-rings and polyethylene seats. Rated at 150 psi. Available in 11⁄2” and 2” only.

MODEL EACH 6+

BV112S 11⁄2” SLIP X SLIP $15.80 $14.20

BV112T 11⁄2” FNPT X FNPT 19.70 17.71

BV2S 2" SLIP X SLIP 21.30 19.10

BV2T 2" FNPT X FNPT 26.40 23.62

TRUE UNION BALL VALVES TECH FAV

These high-quality valves are available at low-end prices. They feature PTFE seats that provide easier turning, better sealing and longer valve life. Schedule 80 PVC with EPDM O-rings rated at 150 psi at 72ºF. Slip unions are included for all valves. All except TB3 and TB4 have molded actuator attachments. Imported.

MODEL SHIP WT (LBS) EACH

TB12 1⁄2" 1 $9.75 $8.68/10+

TB34 3⁄4" 1 12.00 10.68/10+

TB1 1" 2 16.20 14.42/10+

TB114 11⁄4" 2 21.85 19.45/10+

TB112 11⁄2" 3 28.45 25.32/10+

TB2 2" 4 38.60 34.35/10+

TB3 3" 11 108.30 96.38/10+

TB4 4" 30 221.85 197.45/6+

SINGLE UNION BALL VALVES These ball valves are made entirely of glass-filled polypropylene for strength and chemical resistance. They feature low-operating torque (as in easy to open and close), PTFE seats and double EPDM O-rings in the stem area and a 150 psi rating. Choose two- or three-way style. Imported.Note: Union may not be removed while under pressure, even if in the “off” position.

MODEL FNPT EACH

PBV132 1⁄2" $16.60

PBV133 3⁄4" 16.50

PBV134 1" 20.23

PBV135 11⁄4" 27.15

PBV136 11⁄2" 36.38

Three-Way Valve Note:1. Always open.2. Open when handle is as shown.3. Closed when handle is as shown. Turn handle 90º and 2 and 3 are closed.

Turn handle 180º and 3 is open and 2 is closed.

Two-Way, Single Union Three-Way, Single UnionMODEL FNPT EACH

PBV232 1⁄2" $30.46

PBV233 3⁄4" 29.85

PBV234 1" 37.31

PBV235 11⁄4" 35.71

PBV236 11⁄2" 50.00

PBV237 2" 59.54

Dennis DeLong Dennis received his Bachelor’s degree in biology from West Virginia University, and his Master of Science degree in management from North Carolina State University.Beginning in aquaculture in 1978, He has extensive experience in pond aquaculture of freshwater prawns and in the design, construction and operation of recirculating aquaculture systems. He previously managed the North Carolina Fish Barn project and provided aquaculture extension assistance at North Carolina State University.

MANAGER OF CUSTOMER ADVOCACY


12V 2-WAY BALL VALVESPerfect for aquacultureThe KZValve QX Series 2-way, 12V 1.5A Ball Valves are powered by high-torque, valve-actuating motors. Permanently lubricated, machined steel gears open and/or close thepolypropylene ball valve in 1.5 seconds. These valves are heavy-duty, fully weatherproof and compatible with recirculating aquaculture water containing fish feces (not mud, sand or debris). Supplied with a 24” four-wire lead (you supply the switch). The 12V adapter (992) will operate one valve. The ball valves can be disassembled. One-year warranty. Made in USA.• NEMA 6P rated waterproof actuator housing• 316 stainless steel ball and stem

MODEL EACH

900 VALVE, 3⁄4" $280.00

902 VALVE, 1" 280.00

904 VALVE, 11⁄2", 12V 375.00

906 VALVE, 2" 461.00

908 VALVE, 3" 700.00

992 ADAPTER, 115VAC TO 12VDC 28.00

STAINLESS STEEL COMPACT SOLENOIDThis UL-listed solenoid valve has 1⁄4” NPT in/out ports, 0–140 psi range, fluoroelastomer rubber seal material and 1⁄2” NPT conduit connection. 115V/60 Hz only. 17 VA (hold), 24 VA (inrush). NEMA 4. Made in Germany.

MODEL EACH 4+

813NC NORMALLY CLOSED $136.59 $137.49

PVC GATE VALVESPVC gate valves operate like their bronze counterparts but at a fraction of the cost. Gate valves are best suited to full open or full closed operation. Do not freeze. NSF-approved, 150 PSI maximum working pressure. Available in both Slip and FNPT. Made in USA.

ECONOMICAL PVC GATE VALVESPVC, pressure-rated to 40 psi. Do not freeze. Valves include “gate keeper” accessory to hold gate open.

MODEL EACH

GV112-2 11⁄2" SLIP $7.66

GV2-2 2" SLIP 11.85

PURE OXYGEN SOLENOID VALVESOil and grease can be explosive when exposed to high-pressure pure oxygen, so we offer this specially made solenoid for use with pure oxygen. It has 1⁄8” NPT in/out, 1⁄8” orifice, stainless steel body and 1/2” conduit connection. 815NO is UL-listed. 115V/60 Hz only. Made in Germany.

MODEL EACH

815NC NORMALLY CLOSED $225.40

815NO NORMALLY OPEN 285.69

LARGE OPENING SOLENOIDSFor a high volume of air or water, a large opening is needed. These solenoid valves are servo assisted to open and close openings up to 11⁄2”. Rated to 140 psi, they require no differential pressure. Brass body. Opening sizes same as in/out sizes. 115V/60 Hz, normally closed only. NEMA 4. Each weighs 2 lbs. Allow one week for shipment. Made in Germany.

MODEL EACH

817NC 1⁄2” $199.64

818NC 1” 330.78

SOLENOID TIMERThis NEMA 4 outdoor-rated timer can be fitted to any solenoid on this page (plug standard to DIN 43 650). Timer is programmable via DIP switches and potentiometers. Can be programmed for various on/off cycle times from 1 second to 100 hours, including switch-on impulse. LED display, maximum power consumption is 1.5 watts. It features NEMA 4 protection and working temperature from 14–140ºF. 115V/60 Hz.

MODEL EACH

825 $124.14MOTORIZED BALL VALVES Schedule 80 heavy-duty ball valves feature PTFE seats and seals and 115V 50/60 Hz actuator motors. Their 5-second opening and 5-second closing speeds prevent water hammer. The motor has a NEMA 4X protective cover. Locked rotor amp draw is 2.2 (running amps will be about 1.5). Available in both Slip and FNPT. One-year warranty. Made in USA.

SOLENOID VALVESFor automating the flow of air, water, oil, etc., these valves are UL-listed with 1⁄2” NPT conduit connection (12V) or cord nut (115V). The valve body is brass with stainless steel internals. Temperature range is 14–194ºF (-10–90ºC). 1/8” NPT ports and internal opening, .3 gpm @ 1 psi, 2.2 gpm @ 85 psi. 85 psi max @ 12V, 145 psi max @ 115V, 8 watts. Rated for continuous duty. Made in Germany.

MODEL EACH

81NC 115V, N.C. $83.22

811NO 115V, N.O. 145.50

82NC 12V, N.C. 85.00

812NO 12V, N.O. 135.82

815NC

817NC

MV34

81NC

WGV12

906

GV112-2

SLIP FNPT SIZE MODEL EACH MODEL EACH

1⁄2” WGV12 $12.95 WGV12T $12.95

3⁄4” WGV34 15.95 WGV34T 15.951” WGV1 19.95 WGV1T 19.9511⁄4” WGV114 25.95 WGV114T 25.9511⁄2” WGV112 32.95 WGV112T 32.952” WGV2 38.95 WGV2T 38.95

SLIP FNPT SIZE MODEL EACH MODEL EACH

3⁄4” MV34 $313.46 MV34T $313.461” MV1 320.23 MV1T 320.2311⁄4” MV114 329.54 MV114T 329.5411⁄2” MV112 337.62 MV112T 337.622” MV20 349.63 MV20T 349.63

PLUMBINGValves

407



408 PLUMBINGValves

GATE VALVE REPLACEMENT PARTSThese replacement seals fit our GV part numbers up to 8”. Made of TPE and sold either in kits, which include two seals and the required nuts and bolts, or as seals only for 4”, 6” and 8” valves. Replacement valve handles are either plastic or metal.

MODEL EACH

RSK112 11⁄2" SEAL KIT $4.94

RSK2 2" SEAL KIT 5.61

RSK3 3" SEAL KIT 7.21

RS4 4" SEAL (1) 3.09

RS68 6" AND 8" SEAL (1) 36.05

PH112 PLASTIC HANDLE, 11⁄2–3" 3.59

MH112 METAL HANDLE, 11⁄2–4" 4.99

GV2

KNIFE GATE VALVES, 11⁄2” TO 8”Perfect for waste drains and low-pressure aquacultureKnife gate valves are economical, quick-acting valves for clean and dirty water low-pressure applications. They have become very popular in the aquaculture industry for several reasons: they can be easily taken apart, the seals can be changed and even the valve body can be changed without upsetting the ends that may be glued to your pipes. Therefore, they can be used in place of unions! If you have a valve glued in place, but want to take it out, you can simply unbolt it and purchase new side pieces. They offer unrestricted flow and are quick opening, 100% water tested at the factory and quite low in cost. These 11⁄2” to 8” valves are all PVC with stainless steel shafts, polypropylene knife gates (except for 4”, 6” and 8”, which are stainless steel), and have TPE seals. The valves listed are all slip x slip, but please note that you can order sides in various other styles below. Like most valves, they are not for use in freezing weather. One-year warranty.

MODEL MAX PSI SHIP WT (LBS) EACH 6+

GV11 11⁄2" 45 1 $13.05 $11.75

GV2 2" 40 1 18.54 16.69

GV3 3" 30 2 26.40 23.76

GV4 4" 20 5 77.25 69.53

GV6 6" 10 18 337.84 304.06

GV8 8" 10 20 503.56 453.20

Larger sizes available, please call.

FLOAT VALVEMade of plastic for use with clean water only (do not use recirculated water). Mount it to a water supply/refill line at the desired water level. When that level is reached, the valve shuts off. It will maintain the level precisely at ±1⁄4”! Flow is 4 gpm @ 30 psi. Operating range is 10 to 120 psi. 1” FNPT inlet. Made in USA.

MODEL EACH 6+

PL9 $35.20 $32.74

GV3

GV4

RSK112

A

C

B 541205

PL9

5"

3.75"

R825

RM262P31⁄2"

RM21431⁄2"

R610

8"

INDUSTRIAL-SIZE FLOAT VALVESThese large-orifice PVC and polypropylene valves with EPDM O-rings are salt water compatible. Maximum operating pressure is 80 psi. Made in USA.

MODEL A B C EACH

541205-AQ 1⁄2" FNPT 3" 4.2" 12" $200.00

541207 3⁄4" FNPT 3.5" 5" 12" 280.00

541210-AQ 1" FNPT 3.5" 5" 13.5" 345.00

FLOAT VALVE, MECHANICAL

MODEL BODY OAL INLETPIPE SIZE OUTLET

FLOW @ 35 PSI EACH 6+

RM65 B&P 10" 1⁄4" HOSE BARB

FREE FLOW 1.3 GPM $6.45 $5.83

RM262P S 10" 1⁄4" MNPT FREE FLOW 1.3 GPM 60.75 54.70

R825 P 8" MGHT FREE FLOW 2.0 GPM 32.30 29.12

RM214 B 10" 1⁄2" MNPT 3⁄8" COMP. 3.0 GPM 17.58 15.85

R7002F B 20" 1⁄2" MNPT 1⁄2" MNPT 12 GPM 62.85 56.53

R610 B 28" 11⁄2" FNPT FREE FLOW 112 GPM 134.45 120.98

B=Brass, P=Plastic, S=Stainless.Note: 100 psi maximum pressure. OAL is overall length with float.

ABS FLOAT VALVEGreat for R/O tanksThis mechanical float valve is made entirely of ABS plastic, compatible with saltwater applications. It measures 81⁄4” long, has a 1⁄4” MPT inlet and a free flow outlet. Flow @ 30 psi is 1 gpm; maximum 90 psi. Made in USA. MODEL EACH

RM51 $19.80


CHECK VALVES These plastic check valves have no springs. Use for fresh water, salt water or air. Excellent for foot valves on pumps. 1⁄2-lb stainless steel springs available for more positive closure. Add “85” to end of part number to include springs. Made in USA.

MODEL FNPT EACH -85

CV1 3⁄4" $10.09 $10.95

CV2 1" 10.35 10.90

CV3 11⁄4" 15.36 16.17

CV4 11⁄2” 18.27 19.23

CV5 2" 22.33 22.28

CLEAR SWING CHECK VALVES For use in fresh or salt water with a minimum of head loss, these PVC swing check valves are identical to our white PVC swing check valves, only clear. They’re completely non metallic and use no springs. They’re pressure rated up to 100 psi and mount both horizontally and vertically. They have a full-flow design with a Buna-N seal and hinge (slip x slip). Not recommended for use with air. Made in USA.

MODEL EACH 4+

CCV12 11⁄2” $20.46 $18.41

CCV13 2" 33.80 30.42

CCV14 3" 51.40 46.26

CCV15 4" 73.66 66.29

PVC SWING CHECK VALVEUse where minimal head loss is important. They are nonmetallic and use no springs. Rated to 100 psi. Mount horizontally or vertically. Full flow design. Buna-N seal and hinge—slip x slip. Not recommended for use with air.

MODEL EACH 4+

CV9 3⁄4" $14.58 $13.12

CV10 1" 15.80 14.22

CV11 11⁄4" 16.14 14.53

CV12 11⁄2" 16.64 14.98

CV13 2" 25.88 23.29

CV14 3" 46.78 42.10

CV15 4" 64.10 57.69

WELL SCREENS & POINTSWell screens are for dewatering wet areas and use as pump pre-filters in lakes, ponds and culture systems to prevent debris or animals from being pumped with the water. Made from Schedule 40 PVC pipe, screens have precision-cut slots that are .01” or .04” and made horizontally to prevent collapsing and for more open area per foot than vertical slotting. Use the .01” screens with the “WP” well points to create a shallow well; use the .04” size for less clogging or higher flowrates. Flowrates are per linear foot and are based on 0.1 ft/sec entrance velocity. Order well points separately; see our “PVC Fittings” section for threaded adapters, tees and caps to complete your installation. All screens are 5’ OAL and ship Oversize. Made in USA.

Well Points Only (Fit Schedule 40 Pipe Also)MODEL PIPE SIZE SHIP WT (LBS) EACH 6+

WP125 11⁄4" 1 $1.58 $1.46

WP150 11⁄2" 1 2.28 2.09

WP200 2" 1 3.25 2.94

.01” ScreensMODEL PIPE SIZE GPM/FT SHIP WT (LBS) EACH 6+

WS1251 11⁄4" .7 4 $15.12 $13.63

WS1501 11⁄2" .8 4 16.56 14.90

WS2001 2" 1.3 5 19.33 17.48

.04” ScreensMODEL PIPE SIZE GPM/FT SHIP WT (LBS) EACH 6+

WS1504 11⁄2" 3 4 $19.03 $17.18

WS2004 2" 4 5 20.07 18.12

WS3004 3" 4.6 8 33.82 30.37

WS4004 4" 6.9 11 40.72 36.58

CHECK VALVES Quick and positive action in any position. Polypropylene valve is highly resistant to chemicals and temperatures up to 100ºC (212ºF). Use for any pressure or vacuum system. 228225 will fit tubing 8–10 mm (1⁄4”–3/8” I.D.). Overall length 21/2”. 228215 fits tubing 11–15 mm (7⁄16”–5⁄8” I.D.). Overall length 23⁄4”.

MODEL EACH 50+

228225 FITS 8- TO 10-MM TUBING $3.88 $3.49

228215 FITS 11- TO 15-MM TUBING 5.07 4.56

CCV12

228225

CV1

WP125

WS1251

1720C20

TRUE UNION SWING CHECK VALVESSame as our popular clear swing check valves, but with slip x slip unions, these swing check valves feature quick change bodies. Made in USA.

.01” IS ABOUT 250 MICRONS (THE THICKNESS OF A BUSINESS CARD)..04” IS ABOUT 1,000 MICRONS (HOUSEHOLD WINDOW SCREEN).

CV9

WP150

WS1504

PLUMBINGValves/Well Screens

409

MODEL VALVE SIZE EACH

1720C07 3⁄4” $20.42

1720C10 1" 23.26

1720C15 11⁄2” 27.51

1720C20 2" 39.42

1720C30 3" 72.96



TEE ELIMINATORSHere is a hard-to-find, cost-saving fitting. A PVC 3” x 3/4” reducing tee costs about $10. These tee eliminators can do the same thing for under a buck! Just drill a hole, press in a tee eliminator, then thread in your pipe. Made of flexible PVC with female pipe threads. They work in all rigid pipe materials with pipe walls between 1⁄8” and 1⁄4” thick (use holesaws). Made in USA.

MODEL FPT SIZE MIN. PIPE I.D. HOLE SIZE EACH 50+

FC32 1⁄2" 1" 1" $.70 $.63

FC34 3⁄4" 11⁄4" 13⁄16" .84 .76

FC36 1" 11⁄2" 1 7⁄16” 1.09 .98

410 PLUMBINGPlugs/Couplings/Caps

EP1End Plug

EP4Pipe Plug

HT4D

Hand Tite® is a registered trademark of R. Tim Graham.

FC36

MODEL PVC PIPE SIZE EACH

FC1 11⁄4" x 11⁄4" $5.62

FC2 11⁄2" x 11⁄4" 7.27

FC3 11⁄2" x 11⁄2" 7.09

FC4 2" x 11⁄2" 8.47

FC5 2" x 2" 8.18

FC6 3" x 11⁄2" 13.05

FC7 3" x 2" 8.36

MODEL PVC PIPE SIZE EACH

FC8 3" x 3" $10.73

FC9 4" x 11⁄2" 18.25

FC10 4" x 2" 16.36

FC11 4" x 3" 12.58

FC12 4" x 4" 11.94

FC13 6" x 4" 30.63

FC14 6" x 6" 26.48

EXPANSION PLUGSExpansion plugs are suitable for all low- and medium-pressure water applications. A simple twist of the wingnut will produce a watertight seal. The 11⁄2”, 2” and 3” plugs fit the end of pipes only. The 4”, 6” and 8” plugs can also be inserted into the pipe.

MODEL NOMINAL PIPE SIZE PRESSURE EACH

EP1 11⁄2" END PLUG 40' HEAD $5.15

EP2 2" END PLUG 40' HEAD 6.15

EP3 3" END PLUG 40' HEAD 7.95

EP4 4" PIPE PLUG 40' HEAD 10.15



FLEXIBLE COUPLINGSThese couplings are extremely useful for adapting different materials and sizes, making temporary connections or for permanent connections that must allow some movement. Not FDA-approved for potable water. Clamps are included. Use in low-pressure applications only.

QUICK CAPSFor testing or easy cleanout of low-pressure piping. Clamp included.

MODELPVC PIPE

SIZE EACH

QC1 11⁄2" $6.05

QC2 2" 6.82

QC3 3" 8.36

QC4 4" 10.91

QC5 6" 15.45

QC6 8" 30.91

HAND TITE® PLUGS This reusable Hand Tite® expansion plug is excellent for many applications and can be used in any pipe, including plastic, clay and iron. It seals the bell and spigot ends of pipes as well as jagged holes. Plugs are made of nylon and rubber and can be used in salt water. No tools required for installation.

MODEL PIPE SIZE EACH

HT4D 4" $14.35

HT6D 6" 16.55

HT8D 8" 39.90

HT10D 10" 116.00

HT12D 12" 134.00


SECTIONProducts / Products / Products

411

BOTTOM DRAINSAquadyne Rhino Bottom Drains are machine manufactured from schedule 80 PVC materials, with NO injection molding. All Rhino drains can be installed with extreme confidence in any application by first time installers or experienced professionals. Rhino drains are installed in aquatic environments from ponds, water features, public aquariums, zoos, hatcheries, research facilities, aquaponics and quarantine systems. A bottom drain is one of the most important parts of a water installation, in that it’s integrity is paramount to the success of the entire project. One-year warranty. Made in USA.• Thicker flanges and liner attachment ring that will not flex, distort or crack.• All attachments are precision machine fitted for extra strength with no need

for gap filling.• Thermally welded joints provide extreme durability in the most

demanding environments.• No injection molded components which would weaken the structure.RHINO I - Inline vertical drains with 12” anti-vortexing cover. RHINO RETRO - Over the liner, no cut, retrofit drains for environments without bottom drains, or for those who do not want to install a through the liner drain. RHINO I OFS – Threaded for an over flow standpipe or a side wall return.RHINO II - Heavy duty commercial drain with air diffuser and 4” return.

411

MODEL SHIP WT (LBS) EACH

RHINO IBDRH12 2” BOTTOM DRAIN 5 $79.00BDRH13 3” BOTTOM DRAIN 5 79.00BDRH14 4” BOTTOM DRAIN 5 84.00

RHINO RETROBDRTO2 2” ABOVE THE LINER DRAIN 7 89.00BDRTO3 3” ABOVE THE LINER DRAIN 7 99.00

RHINO I OFSBDOFS2 2” OVERFLOW DRAIN OR SIDEWALL RETURN 6 89.00BDOFS3 3” OVERFLOW DRAIN OR SIDEWALL RETURN 6 99.00BDOFS4 4” OVERFLOW DRAIN OR SIDEWALL RETURN 6 129.00

RHINO IIBDRH2A 4” BOTTOM DRAIN W/ AIR DIFFUSER 24 359.00BDRH2O 4” BOTTOM DRAIN W/O AIR DIFFUSER 23 309.00

TANK FITTING KITSAn inlet strainer and elbow are included with these color-coordinated bulkhead kits. The in/out fits standard PVC pipe, so you can make many variations of your own. Bulkheads are also available separately. The kit includes bulkhead, 90° elbow and inlet screen, which fits both sides of the bulkhead. Black is standard.

MODEL GASKET# DIA. L EACH 10+

TFK1 Q10G BULKHEAD KIT, 1⁄2" 11⁄8" 3⁄4" $6.90 $6.20

TFO1 Q10G BULKHEAD ONLY, 1⁄2" 11⁄8" 3⁄4" 5.00 4.50

TFK2 GK1 BULKHEAD KIT, 3⁄4" 13⁄8" 11⁄4" 7.45 6.70

TFO2 GK1 BULKHEAD ONLY, 3⁄4" 13⁄8" 11⁄4" 5.50 4.95

TFK3 GK2 BULKHEAD KIT, 1" 13⁄4" 2" 7.80 7.00

TFO3 GK2 BULKHEAD ONLY, 1" 13⁄4" 2" 5.75 5.20

PLUMBINGTank Fitting Kits/Drains

TFK3

BDC4

Drain TipIf you reuse your drain water, it's best if you gravity flow it to your filter, as a pump will puree it and make it much harder to filter out. But don't make your drain piping too large in diameter. If the water travels too slowly, waste will settle in the pipe. You should always have a dump valve at the end of the drain pipe. When you open it, a surge of high velocity water will scour out all settled material and prevent it from contaminating your recirculated water.

90º BOTTOM DRAINSNishikoi 90º bottom drains are designed for use in ponds of all sizes. Sweeping corner prevents waste collection.

BOTTOM DRAIN This 4” bottom drain is for use in liner ponds and concrete ponds. Its antivortex drain cover forces water to enter from the bottom of the pond, and its large intake helps reduce pump pressure. SAE standard pipe connection, use with 4” PVC. Offset suction port creates a swirl action that helps remove debris. Includes everything you need for easy liner installation.

RHINO I

RHINO I OFS

RHINO RETRO

RHINO II

MODEL EACH

BDC3 $99.99BDC4 131.25

MODEL EACH

SBD4 $80.59




08412 PLUMBINGScreens/Strainers/Foot Valves

270554

CV1S

TSS20

CS3003

FTV1

MESH TUBES, PLASTIC Made from high-density polyethylene, these perforated screen tubes are great for fitting over standpipes, 3⁄16” (4 mm) openings. Sold in 44” lengths; fit nicely over Schedule 40 PVC.

MODEL FITS OVER EACH 6+

RT144 1" PVC $9.83 $8.85

RT244X 2" PVC 19.11 17.20

RT344X 3" PVC 22.21 19.99

RT444X 4" PVC 25.73 23.16

RT144

STRAINERSPlastic strainers with slots that are approximately 1⁄8” wide in all sizes. Made in USA.

FOOT VALVESThese foot valves are perfect for koi ponds and small aquaculture applications. Consisting of a check valve and a strainer, they keep water in the line of non-self-priming pumps. The polymer check valves have no springs, can be used in fresh or salt water and have a very low pressure loss. Strainers are constructed of acetal resin plastic and have 1⁄8” slots. Made in USA.

MODEL EACH

FTV34 3⁄4” NPT $11.98

FTV1 1" NPT 11.98

FTV114 11⁄4" NPT 16.80

FTV112 11⁄2" NPT 19.28

CANAL/LAKE SCREENSDesigned for maximum flow and durability, this screen is made of heavy PVC pipe. Slots are .040” (1,000 microns) and it has a 2” FNPT connection. Made in USA.

MODEL MAX GPM EACH

CS3003 3" D x 3' L 14 $38.46

CS3004 3" D x 4' L 18 50.25

STRAINERSMade from high-density polyethylene. Made in USA.

MODEL FNPT OPENINGS EACH 4+

TSS20 11⁄2" 1⁄4" x 1" $7.60 $6.83

TSS25 2" 1⁄4" x 1" 7.60 6.83

TSS35 3” 1⁄2" x 11⁄2" 17.55 15.79

STRAINERSStrainers fit check valves CV1 to CV4 and can be used for many other applications. Made of acetal resin. Overall length includes threads. Strainer slots are approximately 1⁄8” wide on all sizes. Made in USA.

MODEL MNPT OAL EACH 6+

CV1S 3⁄4" 23⁄4" $1.35 $1.20

CV2S 1" 3" 1.65 1.48

CV3S 11⁄4" 31⁄4" 1.75 1.56

CV4S 11⁄2" 4" 2.05 1.87

BULKHEAD HOSE FITTINGIf you need a 11⁄2” hose barb on a tank, you can’t beat our price on this one! Requires a 17⁄8” hole and the maximum wall thickness is 1⁄4”. It is PVC, and the metal nut is not suitable for salt water. One gasket (GK3) included. Imported.

MODEL EACH 12+

BKF15 $4.92 $4.43

MODEL FITS OVER EACH EACH

270554 1⁄2" MNPT 21⁄4" $1.96

270556 3⁄4" MNPT 27⁄16" 2.30

175251 1" MNPT 213⁄16" 3.05

270557 11⁄2" MNPT 35⁄8" 4.95

270561 2" MNPT 37⁄8" 9.35



413

CABLE SAWEvery plumber needs oneDesigned to cut ABS, PVC and CPVC pipe, this handy saw is great for cutting in hard to reach areas. Made of stainless steel, it will cut pipe up to 6” in diameter.

MODEL FITS BULKHEAD NUMBERS EACH

U601 11⁄4” U050, U075 $21.37U602 13⁄4” U100 28.25U603 2” U125 28.84U604 21⁄2” U150 35.55U605 3” U200 37.51U606 4” U300 50.68U607 5” U400 103.00BT14 1⁄4” BIT 1.80

HOLESAWSThese fine US-made holesaws are the right size for drilling holes for Uniseal® rubber seals. A drill chuck arbor is welded on, but a 1⁄4” drill bit (not included) will be needed for the center when used with an electric hand drill.

U601

SOFT TUBING CUTTERSThese handy cutters are great for cutting vinyl tubing, rubber hose, polyethylene, rope and other soft materials. The KT100 cuts up to 1” outside diameter tubing, while the KT200 cuts up to 2” in diameter. Plastic body with stainless steel blade. Made in USA.

MODEL EACH

KT100 1” CUTTER $16.67KTB100 REPLACEMENT BLADE FOR KT100 5.82KT200 2” CUTTER 18.78KTB200 REPLACEMENT BLADE FOR KT200 7.00

KT100KT100

PIPE CUTTERS FOR PVCProfessional PVC pipe cutters are designed for quick, clean cuts of PVC, polyethylene pipe and hose. The hooked jaw holds pipe in cutting position. Blades are made of a special alloy steel. Blades, ratchet and spring have a rust-resistant finish.

KT8A

HOLESAWSFor bulkheadsThese high-quality holesaws are the right tool for cutting bulkhead holes through wood, plastics, etc. They will cut fiberglass but dull rapidly. Expect about ten holes in 1⁄4” fiberglass before replacement. They cut to a depth of 11⁄4”. They must, however, be used with arbors. Order arbor number HSA1 with the 11⁄8” holesaw (HS20). Order arbor number HSA2 with all other holesaws. Made in USA. HS20

MODEL FITS BULKHEAD NUMBERS EACH

HS20 11⁄8” TFK1 $11.50HS21 13⁄8” TFK2, 35/36012L 12.55HS22 111⁄16” TFK3, 35/36034L, TF1, TF2 14.75HS23 17⁄8” 35/36100L 14.75HS24 23⁄8” 35/36114L, 35/36112L 19.60HS25 29⁄16” TF3, TF4, TF5 21.35HS26 31⁄4” TF6 22.85HS27 31⁄2” 35/36200L 22.85HS28 41⁄2” TF7, 35/36300L 63.25HS29 51⁄2” 35/36400L 73.55HSA1 ARBOR, SMALL HS20 HOLESAW 18.25HSA2 ARBOR, LARGE ALL OTHER HOLESAWS 19.90

SHIP WT MODEL (LBS) EACH

KT5A PVC PIPE CUTTER TO 11⁄4” 2 $24.28KT8A PVC PIPE CUTTER TO 2” 12 51.83KTR5A REPLACEMENT BLADE FOR KT5A 1 9.69KT5ASP REPLACEMENT SPRING KIT FOR KT5A 1 1.80KT8ARK REPAIR KIT FOR KT8A 2 15.75

MODEL EACH

GB4 11⁄4” STEEL GLASS BIT $25.61GB5 11⁄2” STEEL GLASS BIT 24.03GB6 13⁄4” STEEL GLASS BIT 28.10GB7 DRILLING COMPOUND, 1 LB 8.86GB8 CLAY, 1 LB 6.35GB9 PLASTIC DAM RING, 3” 21.62

GLASS DRILL BITSThese bonded special drill bits are what you need for drilling bulkhead holes through glass tanks. The steel tube drill will take about 12 minutes per 11⁄4” dia. hole, but lasts much longer. Steel drills must be used with a carbide compound (1 lb per 50+ holes). A 50/50 cooling solution of antifreeze/water with either a clay or plastic dam ring is required. Instructions included. Bonded drill bits must not be used on metal, concrete or masonry and require proper speed and adequate water lubrication.

GB4GB9 filled with cooling solution.

MODEL EACH

CS24 $14.60

413PLUMBINGPipe Cutters/Holesaws/Cable Saw/Drill Bits



Bulkhead Buying KeyFollow this key carefully to get the right bulkhead. Note that "F" is on the flange side and "L" is length between the gasket and the nut when the nut is at the maximum distance. The "size" of a bulkhead refers to the plumbing connections, the "F" or "B" dimension. The size of the hole needed is the "D" dimension. Do not use these threads for plumbing connections. All of our bulkheads come with one gasket. For most applications only one gasket is needed, located on the flange side, whether or not the flange side is on the water side.

414 PLUMBINGBulkhead Fittings

TF1

3/4" MPT1/2" MPT

1/8" MPT1/4" MPT

3/8" MPT

35012L

BKF4

BFA SERIES BULKHEAD FITTINGSOur highest quality PVC tank adapters have left-hand threads and a hex-shaped body that allows one-person installation. Heavy-duty, full-buttress threads help prevent leaks under pressure. Select either slip or female inside pipe thread (see below). Price includes one EPDM gasket. Made in USA.

TECH FAV BULKHEAD FITTINGS These are a lower strength alternative to our top-quality PVC bulkheads and quite adequate for most applications. BKF7 is white. All others are black. One gasket included.

MODEL GASKET # SIZE F B D L EACH 10+

BKF1 Q10G 1⁄2" FIPT FIPT 11⁄8" 3⁄4" $5.75 $5.16

BKF2 Q10G 1⁄2" FIPT SLIP 11⁄8" 3⁄4" 6.65 5.98

BKF3 GK1 3⁄4" FIPT FIPT 17⁄16" 1" 6.40 5.79

BKF4 GK2 1" FIPT SLIP 13⁄4" 11⁄2" 8.20 7.34

BKF5 GK2 1" FIPT FIPT 13⁄4" 11⁄2" 7.90 7.05

BKF6 GK4 11⁄2" FIPT SLIP 23⁄8" 13⁄4" 9.55 8.63

BKF7 GK5 2" FIPT SLIP 27⁄8" 13⁄4" 12.30 11.09

BULKHEAD FITTINGSFIPT x FIPTThese female threaded bulkhead fittings are great for most bulkhead applications. Made of polypropylene, they are similar to, but softer than, the PVC bulkhead fittings. Price includes one EPDM gasket.

MODEL GASKET # SIZE F B D L EACH 10+

TF1 GK2 1⁄2" FIPT FIPT 13⁄4" 3⁄8" $5.78 $5.20

TF2 GK2 3⁄4" FIPT FIPT 13⁄4" 1⁄2" 5.78 5.17

TF3 GK3 1" FIPT FIPT 2" 1⁄2" 6.98 6.25

TF4 GK4 11⁄4" FIPT FIPT 29⁄16" 1⁄2" 8.19 7.36

TF5 GK4 11⁄2" FIPT FIPT 29⁄16" 1⁄2" 8.19 7.36

TF6 GK5 2" FIPT FIPT 31⁄4" 3⁄4" 9.87 8.89

TF7 GK6 3" FIPT FIPT 41⁄2" 1" 18.71 16.91

TF8 GK7 4" FIPT FIPT 55⁄16" 23⁄4" 44.83 40.33

MODEL GASKET# SIZE F B D L EACH 10+

35012L GK1 1⁄2" FIPT FIPT 13⁄8" 22⁄25" $15.07 $12.81

35034L GK2 3⁄4" FIPT FIPT 15⁄8" 22⁄25" 20.80 17.68

35100L GK3 1" FIPT FIPT 17⁄8" 22⁄25" 22.02 18.72

35114L GK4 11⁄4" FIPT FIPT 23⁄4" 2" 30.11 25.59

35112L GK4 11⁄2" FIPT FIPT 23⁄4" 2" 32.76 27.85

35200L GK5 2" FIPT FIPT 31⁄4" 2" 42.34 35.99

35300L GK6 3" FIPT FIPT 41⁄2" 23⁄25" 75.13 63.86

35400L GK7 4" FIPT FIPT 53⁄4" 29⁄20" 139.36 118.46

36012L GK1 3⁄4" SLIP FIPT 13⁄8" 22⁄25" 14.41 12.25

36034L GK2 3⁄4" SLIP FIPT 15⁄8" 22⁄25" 15.92 13.53

36100L GK3 1" SLIP FIPT 17⁄8" 22⁄25" 17.51 14.88

36114L GK4 11⁄4" SLIP FIPT 23⁄4" 2" 23.36 19.86

36112L GK4 11⁄2" SLIP FIPT 23⁄4" 2" 23.32 19.82

36200L GK5 2" SLIP FIPT 31⁄4" 2" 34.51 29.33

36300L GK6 3" SLIP FIPT 41⁄2" 23⁄25" 67.94 57.75

36400L GK7 4" SLIP FIPT 53⁄4" 29⁄20" 124.85 106.12

MODEL EACH 10+ NO. EACH 10+

GK1 $1.85 $1.67 GK5 $1.72 $1.55GK2 1.12 1.02 GK6 2.93 2.63GK3 1.31 1.18 GK7 25.22 22.91GK4 1.27 1.14 Q10G 0.68 —

F = flange side; B = base/bottom side; D = diameter; L = length (width of glass or acrylic that will fit).



415

BULKHEAD FITTINGS, ECONOMY Fittings include a gasket. Made of ABS plastic.F = flange side; B = base/bottom side; D = diameter; L = length (width of glass or acrylic that will fit).

MODEL GASKET # SIZE F B D L EACH

BKF121 Q10G 1⁄2" SLIP SLIP 11⁄8" 3⁄4" $4.30

BKF122 Q10G 1⁄2" SLIP FIPT 11⁄8" 3⁄4" 4.30

BKF123 Q10G 1⁄2" FIPT SLIP 11⁄8" 3⁄4" 4.30

BKF124 Q10G 1⁄2" FIPT FIPT 11⁄8" 3⁄4" 4.30

BKF341 GK1 3⁄4" SLIP SLIP 13⁄8" 1" 4.95

BKF342 GK1 3⁄4" SLIP FIPT 13⁄8" 1" 4.95

BKF343 GK1 3⁄4" FIPT SLIP 13⁄8" 1" 4.95

BKF344 GK1 3⁄4" FIPT FIPT 13⁄8" 1" 4.95

BKF10 GK2 1" SLIP SLIP 13⁄4" 11⁄2" 5.35

BKF11 GK2 1" SLIP FIPT 13⁄4" 11⁄2" 5.35

BKF12 GK2 1" FIPT SLIP 13⁄4" 11⁄2" 5.35

BKF13 GK2 1" FIPT FIPT 13⁄4" 11⁄2" 5.35

BKF1120 GK4 11⁄2" SLIP SLIP 23⁄8" 13⁄4" 6.25

BKF1121 GK4 11⁄2" SLIP FIPT 23⁄8" 13⁄4" 6.25

BKF1122 GK4 11⁄2" FIPT SLIP 23⁄8" 13⁄4" 6.25

BKF1123 GK4 11⁄2" FIPT FIPT 23⁄8" 13⁄4" 6.25

BKF20 GK5 2" SLIP SLIP 27⁄8" 115⁄16" 7.44

BKF21 GK5 2" SLIP FIPT 27⁄8" 115⁄16" 7.44

BKF22 GK5 2" FIPT SLIP 27⁄8" 115⁄16" 7.44

BKF23 GK5 2" FIPT FIPT 27⁄8" 115⁄16" 7.44

PLUMBINGBulkhead Fittings/Rubber Seal

415

BKF10

UNISEAL® RUBBER SEALWhy use an expensive bulkhead when you can use a Uniseal®? Just drill a hole in the pipe, tank or bucket, insert a Uniseal®, then put some window cleaner on the end of the pipe and push it in. It’s that easy! Feel like rubber, but they are made of MPR, rated to 40 psi and warranted for 25 years. They are immune to cold, will not harden and hold pressure and vacuum. The sizes below correspond to standard Schedule 40 PVC pipe. Fit tank wall thicknesses up to 1⁄2”. Made in USA.

MODEL PIPE SIZE PIPE O.D. HOLESAW SIZE EACH 10+

U050 1⁄2" .84" 11⁄4" $1.55 $1.40

U075 3⁄4" 1.05" 11⁄4" 1.58 1.42

U100 1" 1.31" 13⁄4" 1.88 1.73

U125 11⁄4" 1.66" 2" 2.32 2.08

U150 11⁄2" 1.90" 21⁄2" 2.59 2.35

U200 2" 2.37" 3" 4.48 4.05

U300 3" 3.50" 4" 4.86 4.37

U400 4" 4.50" 5" 6.02 5.33

U600 6" 6.62" 7" 7.38 6.05

Tank Wall

Push PipeFrom This Side

Pipe

Flange Side (E)

Gasket

Nut

Uniseal® is a registered trademark of Uniseal, Inc.

How to Glue PVC Pipe1. Square pipe ends and remove all burrs, dirt and debris.2. Check the dry fit of the pipe and fitting. The pipe should easily fit in one-third of the way. Pipe

should not bottom when dry; it should be a snug fit.3. Clean pipe and fitting with PVC cleaner, then prime with Purple Primer. Choose proper PVC

cement based on desired cure time (regular cement requires 24-hour cure vs "Rain Tight" 1-hour cure for low-pressure applications).

4. Apply a thin coat of PVC cement to fitting, avoiding puddling inside of pipe. Make certain the entire socket surface is covered.

5. Apply a liberal coat of PVC cement to pipe. Make certain the entire pipe surface to the socket depth is covered.

6. Quickly assemble parts. Cement must be fluid when attaching segments. If not, reapply cement to both parts.

7. Push pipe FULLY into fitting using a 1⁄4 turn motion until pipe bottoms.8. Hold pipe and fitting together for 30 seconds, then wipe off excess glue with a cloth.

Watch that it doesn't creep back.9. Keep cement container tightly closed when not in use.10. Do not pressure test until cement is fully cured, usually 24 hours.

TECH TALK 15



416 PLUMBINGPipe Hangers/Supports/Clamps/PVC Pipe

CP14

FPP12 BFPP12

SNP2

CP7FLEXIBLE PVC PIPEThis flexible Schedule 40 PVC pipe permits compound curves, greatly reducing the number of fittings otherwise required. It also reduces friction loss caused by elbows. Standard Schedule 40 or 80 PVC fittings can be used. A special solvent cement (235) is required (do not use purple primer—use acetone as a pipe primer). Sold in full rolls or by the foot. To purchase by the foot, add “F” to end of the part number (e.g., FPP12F). Part numbers beginning with “F” are white, those with “B” are black.

MODEL PSI AT 70º FMAX BEND

RADIUS ROLL LENGTHSHIP WT

(LBS) FOOT ROLL

FPP12 1⁄2" 100 2" 100' 14 $1.45 $67.85

FPP34 3⁄4" 100 2" 100' 17 1.60 100.85

FPP112 11⁄2" 65 5" 50' 23 2.40 74.00

BFPP12 1⁄2" 100 2" 100' 14 1.09 97.83

BFPP34 3⁄4" 100 2" 100' 17 1.31 126.89

BFPP1 1" 100 3" 50' 13 1.68 59.68

BFPP114 11⁄4" 80 4" 50' 22 1.84 77.33

BFPP112 11⁄2" 65 5" 50' 23 2.10 82.90

BFPP2 2" 60 6" 50' 32 3.20 124.46

235 FLEX PVC SOLVENT CEMENT, 1⁄2 PINT CAN 10.00/CANHAZMAT A

PIPE HANGERSOn the floor, wall or overhead, these neat plastic hangers will make the job go fast and look great when it’s done. After all the hangers are attached, push pipe into the open jaws, and a sharp “click” signals that it is locked in place. They also release easily. Meets UPC (Uniform Plumbing Code) specifications. Sizes below fit PVC, CPVC, ABS, PE, PP, PB and fiberglass pipe nominal sizes. Temperature range: -40 to 180°F. Reusable.

MODEL EACH

CP4 1⁄2” $.96 $.86/100+CP6 3⁄4” 1.44 1.29/50+CP7A 1” 1.90 1.67/50+CP8 11⁄4” 2.66 2.36/25+CP9 11⁄2” 3.30 2.95/25+CP10A 2” 4.30 3.82/20+CP11A 21⁄2” 6.39 5.62/25+CP12A 3” 9.45 8.32/25+CP13A 4” 16.85 14.83/25+

PIPE SUPPORTS These inexpensive pipe clamps are ideal for floor and wall mounting but not for overhead mounting of water pipes. They fit standard PVC pipe. A single screw (not included) mounts each pipe support.

MODEL EACH 20+

CP14 BLACK, 11⁄2” $1.32 $1.16CP15 WHITE, 2” 1.65 1.49

PLASTIC CLAMPSThese quick ratcheting, noncorroding clamps work very well on vinyl tubing. They tighten by hand or with pliers and are releasable/reusable. Not for high-pressure applications. Maximum diameters shown are with two teeth engaged. UV-resistant.

MODEL CLAMP MINMAXIMUM DIAMETER

FITS VINYL TUBING PART NO. EACH 100+

SNP2 0.35" 0.39" TV40 $.46 $.41

SNP6 0.45" 0.51" TV60 .70 .64

SNP10 0.57" 0.65" TV70/TVR60 .70 .64

SNP14 0.70" 0.80" TV80/TVR70 .70 .63

SNP19 0.86" 1" TVR80 .70 .63

SNP24 1" 1.13" TV90/TVR90 .95 .86

SILICONE TUBING, AQUARIUM Extremely flexible, kink-resistant, UV- and tear-resistant, nontoxic, tinted light blue and affordable, this high quality silicone tubing could become your favorite aquarium tubing. Autoclavable. Temperature range -80 to 500°F. Its 1⁄8” I.D. fits aquarium devices and 3⁄16” barbed fittings.

VALVE FOR SILICONE TUBINGPrecision ABS, special low-cost roll clamp, for use with silicone tubing, has flow regulating accuracy compatible to needle valve. Design allows for precise and uniform flow control of air or liquids and stays where it’s set! It will only work with our silicone tubing. Made in USA.

BLACK AND WHITE VINYL TUBING Opaque (nontransparent) tubing blocks sunlight to eliminate algae growth when used for water delivery. Black hides well in garden ponds, etc. Working pressures same as clear tubing above. Roll size is 100’. To order by the foot, add “F” to end of part number. Made in USA.

MODEL I.D. O.D. ROLL SHIP WT FOOT ROLL 4+

BTP30HD BLACK TUBING 3⁄16" 5⁄16" 4 LBS $.47 $24.75 $22.28BTV40 BLACK TUBING 1⁄4" 3⁄8" 4 LBS .49 30.04 27.04BTV70 BLACK TUBING 1⁄2" 5⁄8" 8 LBS .81 53.59 48.23

WTP30HD WHITE TUBING 3⁄16" 5⁄16" 4 LBS $.45 $27.98 $25.18WTV40 WHITE TUBING 1⁄4" 3⁄8" 4 LBS .49 32.25 29.03WTV60 WHITE TUBING 3⁄8" 1⁄2" 5 LBS .62 45.92 41.33WTV70 WHITE TUBING 1⁄2" 5⁄8" 8 LBS .66 50.17 45.15

BTV40 WTV70BTV70BTP30HD WTP30HD WTV40 WTV60

MODEL EACH 10+

TP30S $52.86/100’ $43.32

MODEL EACH 100+

290 $.23 $.17

PLUMBINGSilicone Tubing/Valve/Vinyl Tubing

417


RIGID CLEAR TUBINGRigid tubing is ideal for microalgae and zooplankton culture tanks where aeration is required at the bottom of the tank. This is a thin-walled (only .020" to .030" thick), rigid, "straw-like" tube. Sold in 36" length. To extend length, use a piece of vinyl tubing as a coupler.

16025

16045

MODEL LENGTH O.D. FITS TUBING EACH 6+ 24+

16005 36" 3⁄16" TP30 $2.75 $2.20 $1.9316010 36" 5⁄16" TV40 2.85 2.28 2.0016015 36" 3⁄8" TV60 2.95 2.36 2.0716025 36" 1⁄2" TP70 3.85 3.08 2.7016035 36" 5⁄8" TV80 5.30 4.24 3.7116040 36" 3⁄4" TV90 6.65 5.32 4.6616045 36" 1" TV100 7.15 5.72 5.01

1600516015

418 PLUMBINGClear PVC Pipe/Fittings/Tubing


CLEAR PVC PIPE If you need to see what is going on inside your pipes, this clearly is what you need (does have slight blue tint). Use economical short lengths to see the degree of microbial growth inside the piping or build entire clear systems for research, prototypes, oxygen saturators, etc.This clear PVC pipe is FDA-approved for food contact applications. May be cold sterilized in ethylene oxide. It is fully compatible with regular Schedule 40 PVC pipe fittings. Install with regular PVC cement. Use compression couplings, flexible couplings or unions to facilitate cleaning.Sold by the foot, 6’ length maximum. Lengths 5’ and over ship Oversize. Made in USA.

MODELNOMINAL PIPE

SIZE MAX PSI ACTUAL O.D.WEIGHT PER

FOOT FOOT

C100-AQ 1⁄2" 300 0.8" .1 lb $3.02C101 3⁄4" 240 1.1" .1 lb 3.76C102 1" 220 1.3" .2 lb 4.73C103 11⁄4" 180 1.7" .2 lb 7.46C104 11⁄2" 170 1.9" .2 lb 8.47C105 2" 140 2.4" .3 lb 10.63C106 3" 130 3.5" .4 lb 23.61C107 4" 110 4.5" .6 lb 33.15C108 6" 45 6.6" 1.0 lb 58.38373 PVC CEMENT, 1 PINT 9.15

Coupling

90° Elbow

Tee

TA3

TAGL

CLEAR PVC FITTINGSSchedule 40 PVCLike the clear PVC above, these slip PVC fittings use regular PVC cement (373).

TEES

C401005 1⁄2" $8.72C401007 3⁄4" 9.86C401010 1" 16.80C401015 11⁄2" 34.02C401020 2" 48.47

90º ELBOWS

C406005 1⁄2" 7.70C406007 3⁄4" 6.45C406010 1" 14.15C406015 11⁄2" 22.80C406020 2" 39.81

COUPLING

C429005 1⁄2" 4.41C429007 3⁄4" 6.34C429010 1" 10.15C429015 11⁄2" 16.74C429020 2" 20.93

ACRYLIC TUBING“Do it yourself” fish farmers are very inventive, but finding the right materials can sometimes be next to impossible. Acrylic tubing at an affordable price is one of those handy, but hard-to-find, materials we offer.This extruded acrylic tubing has only a 1/8” (3.2 mm) thick wall and is much clearer and lighter than our clear PVC pipe. Standard PVC cement can be used to bond acrylic tubing to PVC for most low-pressure applications. TAGL is light-bodied; allow 24 hours to cure fully. For high-pressure bonds, use WO40, a 2-part heavy-bodied cement for bonding acrylic to itself, ABS or PVC. Sold and priced by the foot. Only TA4 and TA5 are compatible with PVC sockets. Made in USA.

MODEL APPROXIMATE SIZE FITS PVC SOCKET FOOT

TA3 2" O.D. — $5.15TA4 31⁄2" O.D. 3" 9.75TA5 41⁄2" O.D. 4" 14.43TAGL ACRYLIC CEMENT — 8.35WO40 2-PART CEMENT — 40.00

TT18

TYGON S3® E-3603 FLEXIBLE TUBINGSpecifically formulated for lab use, this flexible tubing works with almost any inorganic chemical. Flexible and clear, it is noncontaminating, autoclavable and ideal for liquid and ozone gas transmission. Sold per foot and in 50’ rolls. Add an “F” after part number for per foot.

MODEL FOOT ROLL

TT18 1⁄8" I.D. $1.25 $51.00TT316 3⁄16" I.D. 1.82 72.00TT14 1⁄4" I.D. 2.14 88.00TT38 3⁄8" I.D. 3.59 148.00TT58 5⁄8" I.D. 5.96 250.00TT34 3⁄4" I.D. 7.55 345.00

Tygon S3® is a registered trademark of Saint-Gobain Performance Plastics Corp. and correct the statement.

PLUMBINGVinyl Clear Tubing/Lead Weight

419

All our nonreinforced tubing is marked every 12" for easy measuring. Reinforced tubing has a higher pressure rating.

VINYL CLEAR TUBING FDA-approved clear vinyl tubing. Our aquarium tubing (TP30) is a very high quality product with a slightly larger I.D. and heavier wall than the typical 1⁄8” I.D. aquarium tubing. This tubing is rated at 36 psi @ 72°F (22°C). Made in USA. Note: Vinyl tubing is not recommended for use with pure oxygen or ozone.

TV100 TV40 TP30HD TP30 MAX WORKING SOLD PER FOOT SOLD PER COIL

INSIDE DIAMETER OUTSIDE DIAMETER PRESSURE COIL SHIP WT INCHES MM INCHES MM WALL @ 90ºF MODEL EACH MODEL LENGTH (LBS) EACH 4+

CLEAR TUBING 5⁄32 4.0 1⁄4 6.4 1⁄32" 30 PSI TP30F $0.26 TP30 500’ 6 $63.23 $56.91CLEAR TUBING 3⁄16 4.8 5⁄16 7.9 1⁄16" 40 PSI TP30HDF 0.37 TP30HD 100’ 4 21.48 19.33CLEAR TUBING 1⁄4 6.4 3⁄8 9.5 1⁄16" 40 PSI TV40F 0.60 TV40 100’ 4 24.88 22.39CLEAR TUBING 3⁄8 9.5 1⁄2 12.7 1⁄16" 30 PSI TV60F 0.51 TV60 100’ 5 29.49 26.54CLEAR TUBING 1⁄2 12.7 5⁄8 15.9 1⁄16" 30 PSI TV70F 0.59 TV70 100’ 8 37.41 33.67CLEAR TUBING 5⁄8 15.9 3⁄4 19.1 1⁄16" 20 PSI TV80F 0.99 TV80 100’ 8 70.54 63.49CLEAR TUBING 3⁄4 19.1 1 25.4 1⁄8" 20 PSI TV90F 1.60 TV90 100’ 21 111.54 100.39CLEAR TUBING 1 25.4 11⁄4 31.8 1⁄8" 15 PSI TV100F 2.02 TV100 100’ 26 147.83 133.05CLEAR TUBING 11⁄4 31.8 11⁄2 38.1 1⁄8" 15 PSI TV125F 3.55 TV125 100’ 30 305.62 275.06

TVR150 TVR125 TVR90TVR100TVR200


LEAD WEIGHTUse these 1-oz lead weights with Vinyl Clear Tubing, model TP30, to counteract the buoyancy of air tubing if diffusers are more than 30" deep.

MODEL EACH

LEAD 1 OZ. LEAD WEIGHT $0.38

VINYL REINFORCED CLEAR TUBINGSynthetic, fiber-reinforced, food-grade tubing preferred for its kink resistance, high-pressure rating and flexibility. Tough, flexible, polyvinyl tubing has excellent clarity, is odorless and nontoxic. Temperature range -48 to 160°F. Note: Vinyl tubing is not recommended for use with pure oxygen or ozone.

LEAD WEIGHT

MAX WORKING SOLD PER FOOT SOLD PER COIL INSIDE DIAMETER OUTSIDE DIAMETER PRESSURE COIL SHIP WT INCHES MM INCHES MM WALL @ 90ºF MODEL EACH MODEL LENGTH (LBS) EACH

CLEAR TUBING .250” 6.4 .380” 9.7 .06" 120 PSI TVR40F $.92 TVR40 50’ 3 $33.03 $29.73/4+CLEAR TUBING .375” 9.5 .600” 15.1 .112" 120 PSI TVR60F 1.14 TVR60 50’ 4 47.01 42.31/4+

CLEAR TUBING .500” 12.7 .750” 9.1 .125" 100 PSI TVR70F 1.47 TVR70 50’ 6 61.15 55.04/4+

CLEAR TUBING .625” 15.9 .875” 22.2 .125" 100 PSI TVR80F 1.94 TVR80 50’ 7 75.08 67.57/4+

CLEAR TUBING .750” 19.1 1.025” 26.0 137" 80 PSI TVR90F 2.28 TVR90 50’ 9 90.80 81.72/4+

CLEAR TUBING 1.00” 25.4 1.312” 33.3 .156" 80 PSI TVR100F 3.09 TVR100 50’ 8 132.13 118.92/4+




420 PLUMBINGAdapters/Fittings

Tee Barb x Barb x Barb

Male Adapter NPT x Barb

Connector Barb x Barb

Male Elbow NPT x Barb

Elbow Barb x Barb

Tee Adapter NPT x Barb x Barb

Standard StyleCONNECTOR (BARB X BARB) EACH

101A $.88101B 1.06101C 1.06101D 2.29101E 1.94101F 3.67

MALE ADAPTER(MNPT X INSERT) EACH

103A $.70103B 1.06103C 1.10103D 1.74103E 1.94103F 3.73

90º ELL(BARB X BARB) EACH

105A $1.74105B 2.12105C 2.35105D 2.63105E 3.10105F 4.32

PLUG(BARB) EACH

114A $1.58114B 1.64114C 2.21114D 2.82114E 3.06114F 5.39

TEE (BARB X BARB

X BARB) EACH

107A $1.90107B 2.05107C 2.67107D 4.18107E 5.26107F 9.34

FEMALE ADAPTER

(FNPT X BARB) EACH

117A $3.85117B 4.19117C 4.65117D 5.72117E 7.25117F 9.22

90º ELL(BARB X MNPT) EACH

113A $2.18113B 3.02113C 3.96113D 5.27113E 6.99113F 11.03

101

113

114

103

105

117

107

Male Adapters, Low Cost

MODEL EACH

62001-2 1⁄8" NPT x 3⁄16" BARB $.2862007-2 1⁄8" NPT x 1⁄4" BARB .2862009-2 1⁄8" NPT x 3⁄8" BARB .28

62007-2

62009-2

62001-2

POLY TUBING INSERT FITTINGS, 5⁄8”–2”Use these insert fittings for repairing, adapting or connecting black poly tubing (see Index). Connections under stress or pressure will require hose clamps (see Index). These insert fittings fit the nominal sizes of polyethylene tubing; for instance, a 5⁄8” fitting fits tubing with 0.62” I.D. Use letter following part no. to indicate size (A=5⁄8”, B=3⁄4”, C=1”, D=11⁄4”, E=11⁄2”, F=2”).

CONNECTORS AND REDUCERS MODEL EACH

3⁄16" BARB x 3⁄16" BARB 62068 $.591⁄4" BARB x 3⁄16" BARB 62053 .571⁄4" BARB x 1⁄4" BARB 62069 .521⁄2" BARB x 1⁄4" BARB 62055 .713⁄8" BARB x 1⁄4" BARB 62054 .503⁄8" BARB x 3⁄8" BARB 62071 .521⁄2" BARB x 3⁄8" BARB 62052 .525⁄8" BARB x 3⁄8" BARB 62051 .781⁄2" BARB x 1⁄2" BARB 62072 .535⁄8" BARB x 1⁄2" BARB 62050 1.16

90º CONNECTORS AND REDUCERS MODEL EACH

1⁄8" NPT x 3⁄16" BARB 62001L $.741⁄8" NPT x 1⁄4" BARB 62007L .731⁄2" NPT x 1⁄4" BARB 62085 .991⁄8" NPT x 3⁄8" BARB 62009L .841⁄2" NPT x 3⁄8" BARB 62086 .951⁄2" NPT x 1⁄2" BARB 62087 .951⁄4" BARB x 1⁄4" BARB 62080 .723⁄8" BARB x 3⁄8" BARB 62081 .741⁄2" BARB x 1⁄2" BARB 62082 .78

TEES MODEL EACH

3⁄16" BARB 62063 $.691⁄4" BARB 62064 .743⁄8" BARB 62065 .741⁄2" BARB 62067 .881⁄8" NPT x 3⁄16" x 3⁄16" 62056 1.19

1⁄4" NPT x 1⁄2" x 1⁄2" 62122 1.191⁄2" NPT x 1⁄2" x 1⁄2" 62123 1.07

MALE ADAPTERS MODEL EACH

1⁄8" NPT x 3⁄16" BARB 62001 $.351⁄4" NPT x 3⁄16" BARB 62005 .40

1⁄2" NPT x 3⁄16" BARB 62013 .65

1⁄8" NPT x 1⁄4" BARB 62007 .381⁄4" NPT x 1⁄4" BARB 62006 .381⁄2" NPT x 1⁄4" BARB 62014 .573⁄4" NPT x 1⁄4" BARB 62020 1.141⁄8" NPT x 3⁄8" BARB 62009 .571⁄4" NPT x 3⁄8" BARB 62008 .361⁄2" NPT x 3⁄8" BARB 62016 .553⁄4" NPT x 3⁄8" BARB 62021 .791⁄4" NPT x 1⁄2" BARB 62010 .591⁄2" NPT x 1⁄2" BARB 62018 .603⁄4" NPT x 1⁄2" BARB 62022 .90


BARB SIZE FITS TUBING MODELS

3⁄16" (4.76 mm) TP30, TP30HD

1⁄4" (6.35 mm) TV40, TVR40

3⁄8" (9.53 mm) TV60, TVR60

1⁄2" (12.7 mm) TV70, TVR70

TUBING ADAPTERS, 1⁄8”–3⁄4”These polyethylene, precision-injected, molded fittings are high strength, chemically inert and noncorroding.Approved by the National Sanitation Foundation (NSF) for use with liquids for human consumption. Temperature range: -65 to 190°F. Working pressure up to 120 psi. Shipping weight is 1 lb per 100. Check with us for special fittings not listed (in 50-piece lots only). Barb sizes shown fit the following tubing sizes.Made in USA.

421PLUMBINGReducers


111

110

123

109

119

120

122

112

62028

62075

62083

REDUCER STYLEReducing Tee (Barb x Barb x FNPT)Note: Last dimension is center.

MODEL EACH

121A 3⁄4" X 5⁄8" X 1⁄2" $3.36121B 1" X 3⁄4" X 1⁄2" 4.19

Reducing Male Adapter (Barb x MNPT) MODEL EACH

111A 3⁄4" X 1⁄2" $2.75111B 1" X 3⁄4" 2.85

Reducing Tee (Barb x Barb x Barb)Note: Last dimension is center.

MODEL EACH

123A 3⁄4" X 5⁄8" X 5⁄8" $2.57123B 1" X 3⁄4" X 5⁄8" 3.74

Reducing Male Adapter (MNPT x Barb) MODEL EACH

110A 3⁄4" X 1⁄2" $2.48110B 1" X 3⁄4" 2.571436075 1⁄2” X 1” 2.85

PVC Pipe—Schedule 40 vs Schedule 80In the United States, "Schedule" refers to the thickness of the pipe wall and, therefore, how much pressure it will hold. In most aquaculture applications, Schedule 40 is used because:1. It works for most applications and is readily available.2. In small quantities, it is only slightly more expensive than the thinner wall Schedule 120.3. The wall is thick enough so that it will not distort when walked on.4. From 1⁄2" to 2", it is rated at no less than 140 psi at 73°F. The highest pressure typically found

at any facility is 65 psi, which is the average city water supply.

Schedule 80 is rated at no less than 200 psi at 73°F (up to 2") and is usually gray in color, similar to the gray Schedule 40 pipe used for electrical conduit.There are very few reasons to ever need such a heavy, costly pipe for aquaculture. The outside diameter (O.D.) is the same on Schedule 120, 40 and 80, so an expensive Schedule 80 fitting could be used on Schedule 120 or 40 pipe, if that's all that was available. As the wall of the pipe gets thicker, the inside diameter (I.D.) gets smaller. With fittings, the outside diameter gets larger.The main reason to use Schedule 80 is if it is mandatory in your area for specific applications. Schedule 80 nipples make stronger threaded connections.

TECH TALK 14

Reducing Tee (Barb x Barb x Barb) Note: Last dimension is center.

MODEL EACH

112A 3⁄4” X 3⁄4” X 5⁄8” $2.32112B 1” X 1” X 5⁄8” 2.72112C 1” X 1” X 3⁄4” 2.75

MODEL EACH

62075 1⁄4” NPT X 1⁄4” NPT $ 0.5262083 1⁄2” NPT X 1⁄4” NPT 0.66

MODEL EACH

62024 1⁄8” MALE NPT $0.2862025 1⁄4” MALE NPT 0.2862026 3⁄8” MALE NPT 0.3362027 1⁄2” MALE NPT 0.4062028 3⁄4” MALE NPT 0.71

Plugs

Nipples

90º Ell (Barb x FNPT)MODEL EACH

119A 5⁄8” X 1⁄2” $1.95119B 3⁄4” X 1⁄2” 2.01119C 1” X 1⁄2” 2.12119E 3⁄4” X 3⁄4” 2.12119F 1” X 3⁄4” 2.47119H 1” x 1” 3.34

90º Ell (Barb x FNPT)

MODEL EACH

120A 3⁄4” X 5⁄8” $2.01120B 1” X 3⁄4” 2.47

Reducing Tee (Barb x Barb x FNPT) Note: Last dimension is center.

MODEL EACH

122A 5⁄8" X 5⁄8" X 1⁄2" $2.05122B 3⁄4" X 3⁄4" X 1⁄2" 2.57122C 1" X 1" X 1⁄2" 3.37122D 1" X 1" X 3⁄4" 3.37122E 1" x 1" x 1" 2.57

Reducer Connector (Barb x Barb)MODEL EACH

109A 3⁄4" X 5⁄8" $1.44109B 1" X 3⁄4" 1.48109C 11⁄4" X 1" 2.35109D 11⁄2" X 11⁄4" 2.75109E 2" X 11⁄2" 4.43

121

62014B

62022B

62005B

ZBN54

FLEXIBLE BLACK MODULAR PIPINGThis modular piping snaps together for use in tanks and aquariums (expect some joint leakage). Its unique ball-socket joint design makes it extremely flexible and enables the creation of custom flow patterns in tanks.

MODEL EACH

JT1 1⁄2" FLEX. JOINT TUBING, 6" $3.95JT2 1⁄2" ROUND NOZZLE 1.55JT3 1⁄2" 90° NOZZLE 2.10JT4 1⁄2" MPT CONNECTOR 1.55JT5 1⁄2" Y FITTING 3.35JT6 1⁄2" ELBOW FITTING 2.90JT7 1⁄2" MPT VALVE 9.25JT8 1⁄2" FPT VALVE 7.85JT9 1⁄2" IN-LINE VALVE 8.95JT10 1⁄2" MULTINOZZLE, 15 FLOWS 29.25JT11 1⁄2" X 1.2" FLARED NOZZLE 3.15JT12 3⁄4" FLEX. JOINT TUBING, 6" 4.95JT13 3⁄4" ROUND NOZZLE 1.60JT14 3⁄4" MPT CONNECTOR 1.70JT15 3⁄4" Y FITTING 6.75JT16 3⁄4" F X 1⁄2" M ADAPTER 3.30JT17 3⁄4" X 3" FLARED NOZZLE 6.10

78002 ASSEMBLY PLIERS FOR 1⁄2" TUBING 15.00

78004 ASSEMBLY PLIERS FOR 3⁄4" TUBING 25.00

THREAD CUTTING TAPSThese taps will cut pipe threads (FNPT) in PVC, mild steel, etc. Use with bits shown below to save the cost of tees, saddles and adapters.

MODEL EACH

BNT1 TAP, 1⁄8" NPT $7.25BNT2 TAP, 1⁄4" NPT 7.65BNT3 TAP, 3⁄8" NPT 10.00BNT4 TAP, 1⁄2" NPT 15.20BNT5 TAP, 3⁄4" NPT 22.30

BT1BNT1

DRILL BITS

MODEL EACH

BT1 BIT, 11⁄32" FOR 1⁄8" NPT $3.75BT2 BIT, 7⁄16" FOR 1⁄4" NPT 4.99BT3 BIT, 9⁄16" FOR 3⁄8" NPT 14.05BT4 BIT, 23⁄32" FOR 1⁄2" NPT 21.95BT5 BIT, 15⁄16" FOR 3⁄4" NPT 32.65

BRASS ADAPTERS These high-quality, brass, male adapters will work at high temperatures to 150 psi. Model 62025B has 3⁄4” nominal female pipe thread. They are made of CA360, CA345 or CA370 brass for years of continuous use.Note: Barb sizes are “nominal” (1⁄2” = .62” actual). Made in USA.MODEL MALE ADAPTERS EACH

62001B* 1⁄8" NPT X 3⁄16" BARB $.9562007B 1⁄8" NPT X 1⁄4" BARB 1.3562009B 1⁄8" NPT X 3⁄8" BARB 1.2962005B* 1⁄4" NPT X 3⁄16" BARB 1.6362006B 1⁄4" NPT X 1⁄4" BARB 1.4162008B 1⁄4" NPT X 3⁄8" BARB 1.4162010B 1⁄4" NPT X 1⁄2" BARB 1.5062014B 1⁄2" NPT X 1⁄4" BARB 3.1562016B 1⁄2" NPT X 3⁄8" BARB 3.3362018B 1⁄2" NPT X 1⁄2" BARB 2.58ZBN54** 1⁄2” NPT X 5⁄8” BARB 3.3562021B 3⁄4" NPT X 3⁄8" BARB 3.8562022B 3⁄4" NPT X 1⁄2" BARB 4.1962024B 3⁄4” NPT X 3⁄4” BARB 6.35

MODEL FEMALE ADAPTERS EACH

62025B 3⁄4” FNPT X 3⁄4” BARB 9.50

*Use with TP30HD tubing only. **Reducing style.

JT1/JT12

JT10

JT15 JT7

JT4/JT14

JT3 JT6

JT9 JT8

JT11 JT2/JT13

422 PLUMBINGBrass Adapters/Modular Piping/Taps/Drill Bits


62025B

423

Male With Female ThreadsSIZE MODEL ALUMINUM MODEL POLYPROPYLENE

3⁄4" Q75AA $7.28 Q75AP $4.981" Q10AA 8.32 Q10AP 5.39

11⁄4" Q12AA 10.27 Q12AP 5.22

11⁄2" Q15AA 10.76 Q15AP 5.55

2" Q20AA 12.39 Q20AP 6.38

3" Q30AA 18.88 Q30AP 11.72

4" Q40AA 40.09 Q40AP 16.64

6" Q60AA 84.38 — —

Male With Male Threads SIZE MODEL ALUMINUM MODEL POLYPROPYLENE

3⁄4" Q75FA $8.54 Q75FP $5.07

1" Q10FA 10.08 Q10FP 5.39

11⁄4" Q12FA 11.78 Q12FP 5.73

11⁄2" Q15FA 13.05 Q15FP 6.11

2" Q20FA 14.23 Q20FP 7.92

3" Q30FA 24.89 Q30FP 14.88

4" Q40FA 43.61 — —

6" Q60FA 94.78 — —

Male With Hose NippleSIZE MODEL ALUMINUM MODEL POLYPROPYLENE

3⁄4” Q75EA $9.19 Q75EP $4.86

1" Q10EA 9.24 Q10EP 5.19

11⁄4" Q12EA 11.37 Q12EP 5.67

11⁄2" Q15EA 12.05 Q15EP 6.15

2" Q20EA 13.76 Q20EP 7.14

3" Q30EA 22.47 Q30EP 12.73

4" Q40EA 43.05 Q40EP 18.09

Male PlugSIZE MODEL ALUMINUM MODEL POLYPROPYLENE

1" Q10WA $9.52 Q10WP $4.80

11⁄4" Q12WA 10.78 Q12WP 5.09

11⁄2" Q15WA 11.36 Q15WP 5.46

2" Q20WA 11.78 Q20WP 6.57

3" Q30WA 16.14 Q30WP 10.35

3⁄4” — — Q75WP $3.26

Female CapSIZE MODEL ALUMINUM MODEL POLYPROPYLENE

1” Q10VA $15.52 Q10VP $9.8111⁄4” Q12VA 18.01 Q12VP 9.9211⁄2” Q15VA 18.62 Q15VP 11.942” Q20VA 19.16 Q20VP 13.603” Q30VA 24.70 Q30VP 20.134” Q40VA 33.05 Q40VP 26.12

6” Q60VA 87.95 — —

Female With Male ThreadsSIZE MODEL ALUMINUM MODEL POLYPROPYLENE

3⁄4” Q75BA $15.73 Q75BP $9.25

1" Q10B A 16.93 Q10BP 10.39

11⁄4" Q12B A 19.81 Q12BP 11.68

11⁄2" Q15B A 18.87 Q15BP 12.29

2" Q20BA 22.26 Q20BP 14.19

3" Q30BA 33.74 Q30BP 23.79

4" Q40BA 54.67 — —

Female With Hose NippleSIZE MODEL ALUMINUM MODEL POLYPROPYLENE

3⁄4” Q75CA $14.73 Q75CP $8.98

1" Q10C A 15.14 Q10CP 10.11

11⁄4" Q12C A 20.11 Q12CP 12.63

11⁄2" Q15C A 20.09 Q15CP 12.23

2" Q20CA 22.17 Q20CP 14.18

3" Q30CA 32.53 Q30CP 23.55

4" Q40C A 48.88 Q40CP 27.35

6" Q60CA 111.86 — —

Female With Female ThreadsSIZE MODEL ALUMINUM MODEL POLYPROPYLENE

3⁄4” Q75DA $15.14 Q75DP $8.98

1" Q10DA 15.46 Q10DP 10.99

11⁄4" Q12DA 18.76 Q12DP 11.68

11⁄2" Q15DA 20.00 Q15DP 11.99

2" Q20DA 21.40 Q20DP 14.19

3" Q30DA 36.77 Q30DP 22.554" Q40DA 47.12 — —

Replacement GasketsMODEL SIZE EACH MODEL SIZE EACH

Q75G 3⁄4" $ .79 Q20G 2” $.74

Q10G 1" .68 Q30G 3” .89

Q12G 11⁄4" .74 Q40G 4” 2.15

Q15G 11⁄2" .79 Q60G 6” 2.63

PLUMBINGQuick Disconnect Fittings

QUICK DISCONNECT FITTINGSQuick disconnect couplings provide fast, positive, leak-proof connections for air, liquids and dry products. They connect and disconnect in seconds without tools; simply lift the cam levers. The female fittings use a Buna-N gasket where they meet the male fitting for a cushioned, leakproof seal. Choose either the aluminum or black fiber-reinforced polypropylene for most aquaculture applications. The polypropylene is rated to 100 psi on 3⁄4" to 2" size and 50 psi on the 3" size at 68ºF (20ºC). Made in USA.


MODEL EACH 10+

SIL1B BLACK, 2.8 OZ $9.36 $8.70SIL2B BLACK, 10.3 OZ 17.16 15.98SIL1C CLEAR, 2.8 OZ 9.55 8.89SIL2C CLEAR, 10.3 OZ 17.67 16.46

PTFE THREAD SEALANTS AND TAPEUsed for copper, brass, steel, aluminum, galvanized, PVC and other plastic pipe threads (not recommended for acrylic and plexiglass). Seals to 5,000 psi. This sealant handles temperatures from -250 to 500°F, not recommended for high-pressure pure oxygen. Nontoxic, chemically inert and will not harden. 1-pint can.

The tape is a full .002” thick for easier use. Roll is 1⁄2” wide x 520’ (12.7 cm x 160 m). Meets Mil Spec T-27730A.

MODEL EACH

80633-AQ PTFE SEALANT, 1 PINT $31.75371 PTFE TAPE 1.75


424

O-RING LUBRICANTThis nontoxic, PTFE-based, waterproof lubricant is for wet or dry environments. White, light-bodied, with a temperature range from 0 to 425°F. It prevents rust and is compatible with most metals, rubbers and plastics. USDA H1-rated to be environmentally safe and corrosion free. Coat O-rings, gaskets and bearings before reassembly. 5-oz tube.

PVC JOINT WELDS (APPROX. CEMENT USAGE)ALLOW TWO JOINTS FOR EACH COUPLING, THREE JOINTS FOR EACH TEE, ETC.

1⁄2” 3⁄4” 1” 11⁄4” 11⁄2” 2” 21⁄2” 3” 4”Per Pint 130 80 70 50 35 20 17 15 10

Per Quart 260 160 140 100 70 40 34 30 20

377

SIL2B

SIL1C

Magic Lube® is a registered trademark of Aladdin Equipment Co., Inc.

SILICONE AQUARIUM SEALANTContains no mildew/mold inhibitorsMost silicone sealants on the market should not be used in fish tanks. This one is fish safe for aquarium manufacture and tank repair (after 48-hour cure). Adheres to clean glass, fiberglass, metal, painted surfaces, many plastics and rubbers and nonoily woods. Service range is -60 to 400°F (-51 to 204°C). Meets US Fed. Specs TT-S-001543A, 00230C, Type II. Large size fits standard caulking guns. One-year shelf life. Made in USA.

TECH FAV

CEMENT“Rain Tight” is a cement that will cure in one hour in low-pressure applications. Regular cement takes 24 hours.MODEL EACH

373 CLEAR CEMENT, REGULAR, PT $9.15374 CLEAR CEMENT, REGULAR, QT 15.00377 “RAIN TIGHT” CEMENT, PT 11.40379 ABS/PVC CEMENT 1⁄2 PT 6.54382 PVC PRIMER, PURPLE, PT 8.30383 PVC PRIMER, PURPLE, QT 13.48235 FLEX PVC PIPE CEMENT, 1⁄2 PT 10.00

HAZMAT A

Joint CompoundsWarning: Many general-use pipe joint compounds contain substances that can cause stress cracking in PVC parts. We suggest using PTFE paste (80633) or PTFE tape (371) on threaded PVC parts. Do not overtighten threaded PVC parts! One or two turns beyond fingertight is generally all that is required to make a sound PVC threaded connection. Unnecessary overtightening may cause damage to both pipe and fitting at some future time.

SIL2B

HAZMAT A

PLUMBINGLubricants/Sealants

SIL1B

MODEL EACH 4+

AML $7.94 $7.08

80633-AQ 371


425

A

BC

A B

C

TEE (SLIP X SLIP X SLIP) MODEL SIZE EACH

401005-AQ 1⁄2" $.32 $.26/50+401007 3⁄4" .37 .30/50+401010 1" .69 .55/50+401012 11⁄4" 1.07 .86/25+401015 11⁄2" $1.30 $1.04/25+401020 2" 1.90 1.52/10+401030 3" 8.24 6.59/10+401040 4" 14.90 11.92/6+

INSERT ADAPTER (INSERT X SLIP)MODEL SIZE EACH

474005-AQ 1⁄2" $.82474007-AQ 3⁄4" 0.99474010-AQ 1" 1.05474012-AQ 11⁄4" 1.66

MODEL SIZE EACH

474015-AQ 11⁄2" $2.49474020-AQ 2" 3.99474030-AQ 3" 10.18474040 4" 13.99

INSERT ADAPTER (INSERT X SPIG)MODEL SIZE EACH

460005-AQ 1⁄2” $.90460007-AQ 3⁄4” 1.19460010-AQ 1” 1.24460012-AQ 11⁄4” 1.28

MODEL SIZE EACH

460015-AQ 11⁄2” $1.38460020-AQ 2” 2.29460030-AQ 3” 7.73460040-AQ 4” 8.89

REDUCING TEE (SLIP X SLIP X SLIP)

MODELSIZE

A B C EACH

401101-AQ 3⁄4" x 3⁄4" x 1⁄2" $1.06 $.85/50+401126 1" x 3⁄4" x 1" 1.22 .98/50+401130 1" x 1" x 1⁄2" 0.72 .58/50+401131 1" x 1" x 3⁄4" 0.79 .63/50+401167 11⁄4" x 11⁄4" x 3⁄4" 1.18 .94/25+401168 11⁄4" x 11⁄4" x 1" 1.18 .94/25+401209 11⁄2" x" 11⁄2" x 1⁄2" 2.07 1.66/25+401210 11⁄2" x 11⁄2" x 3⁄4" 2.07 1.66/25+401211 11⁄2" x 11⁄2" x 1" 2.07 1.66/25+401247 2" x 2" x 1⁄2" 2.03 1.62/10+401248 2" x 2" x 3⁄4" 2.03 1.62/10+401249 2" x 2" x 1" 2.03 1.62/10+401251 2" x 2" x 11⁄2" 2.03 1.62/10+401335 3" x 3" x 1" 8.96 7.17/10+401336 3" x 3" x 11⁄4" 8.96 7.17/10+401337 3" x 3" x 11⁄2" 8.96 7.17/10+401338 3" x 3" x 2" 8.94 7.15/6+401419 4" x 4" x 11⁄2" 14.90 11.92/10+401420 4" x 4" x 2" 14.90 11.92/10+401422 4" x 4" x 3" 14.90 11.92/6+

TEE (SLIP X SLIP X FNPT)MODEL SIZE EACH

402005 1⁄2" $.42 $.34/50+402007 3⁄4" 0.66 .53/50+402010 1" 1.22 .98/50+402012 11⁄4" 1.94 1.55/25+402015 11⁄2" 2.52 2.02/25+402020 2" 3.20 2.56/10+402030 3" 12.40 9.92/10+402040 4" 18.95 15.16/5+

CROSSES (SLIP)MODEL SIZE EACH

420005 1⁄2" $0.98 $.78/50+420007 3⁄4" 1.63 1.30/50+420010 1" 2.03 1.62/50+420012 11⁄4" 2.69 2.15/25+420015 11⁄2" 3.05 2.44/25+420020 2" 4.49 3.59/10+420030 3" 11.69 9.35/5+420040 4" 17.31 13.85/4+

REDUCING TEES (SLIP X SLIP X FNPT)

MODELSIZE

A B C EACH

402071 1⁄2" x 1⁄2" x 1⁄8" $.91 $.73/50+402101 3⁄4" x 3⁄4" x 1⁄2" 0.56 .45/50+402130 1" x 1" x 1⁄2" 0.85 .68/50+402131 1" x 1" x 3⁄4" 1.22 .98/50+402166 11⁄4" x 11⁄4" x 1⁄2" 2.03 .62/25+402167 11⁄4" x 11⁄4" x 3⁄4" 2.03 1.62/25+402168 11⁄4" x 11⁄4" x 1" 2.03 1.62/25+402209 11⁄2" x 11⁄2" x 1⁄2" 2.52 2.02/25+402210 11⁄2" x 11⁄2" x 3⁄4" 2.52 2.02/25+402247 2" x 2" x 1⁄2" 3.18 2.54/10+402248 2" x 2" x 3⁄4" 3.18 2.54/10+402249 2" x 2" x 1" 3.18 2.54/10+402251 2" x 2" x 11⁄2" 3.18 2.54/10+402335 3" x 3" x 1" 9.82 7.86/10+402338 3" x 3" x 2" 9.82 7.86/6+

TEE (FNPT X FNPT X FNPT)MODEL SIZE EACH

405005 1⁄2” $1.18405007 3⁄4” 1.84405010 1" 2.55

PLUMBINGTees/Crosses/Adapter Inserts


426

90º ELL (SLIP X SLIP)MODEL SIZE EACH

406005 1⁄2" $.64 $.54/50+

406007 3⁄4" .72 .61/50+

406010 1" .52 .44/50+406012 11⁄4" .91 .77/25+406015 11⁄2" .98 .83/25+406020 2" 1.54 1.31/25+406030 3" 5.61 4.77/10+406040 4" 10.04 8.53/8+

45º ELL (SLIP X SLIP)MODEL SIZE EACH

417005 1⁄2" $.42 $.36/50+

417007 3⁄4" .66 .56/50+

417010 1" .79 .67/50+417012 11⁄4" 1.10 .94/25+417015 11⁄2" 1.38 1.17/25+417020 2" 1.80 1.53/10+417030 3" 7.29 6.20/10+417040 4" 13.07 11.11/5+

CAP (SLIP)MODEL SIZE EACH

447005 1⁄2" $.23 $.20/50+

447007 3⁄4" .27 .23/50+

447010 1" .42 .36/50+447012 11⁄4" .60 .51/25+447015 11⁄2" .65 .55/25+447020 2" .79 .67/10+447030 3" 2.76 2.35/10+447040 4" 6.27 5.33/6+

CAP (FNPT)MODEL SIZE EACH

448005 1⁄2" $.48 $.41/50+

448007 3⁄4" .57 .48/50+

448010 1" .85 .72/50+448012 11⁄4" 1.01 .86/25+448015 11⁄2" 1.05 .89/25+448020 2" 1.87 1.59/10+448030 3" 3.60 3.06/10+448040 4" 6.33 5.38/6+

6” NIPPLE, GRAY SCHEDULE 80 PVCMODEL SIZE EACH

880060 1⁄4" $2.12

881060 3⁄8" 2.26

882060 1⁄2" 1.46883060 3⁄4" 1.82884060 1" 2.50885060 11⁄4" 2.99886060 11⁄2" 4.01887060 2" 5.72888060 21⁄2" 16.25889060 3" 21.78890060 4" 25.92

CLOSE NIPPLE, GRAY (MNPT) SCHEDULE 80 PVCMODEL SIZE EACH 25+

879005 1⁄8" $.94 $.75

880005 1⁄4" .98 .78

881005 3⁄8" 1.02 .82882005 1⁄2" .89 .71882007 3⁄4" .94 .75882010 1" 1.25 1.00882012 11⁄4" 1.82 1.46882015 11⁄2" 1.98 1.58882020 2" 2.61 2.09888005 21⁄2" 8.94 7.15887030 3" 10.67 8.54890005 4" 17.43 13.94

90º ELL (FNPT X SLIP)MODEL SIZE EACH

407005 1⁄2" $.32 $.27/50+

407007 3⁄4" .37 .31/50+

407010 1" .69 .59/50+407012 11⁄4" 1.15 .98/25+407015 11⁄2" 1.28 1.09/25+407020 2" 3.30 2.81/10+407030 3" 12.22 10.39/8+407040 4" 18.52 15.74/4+

PLUMBINGElls/Nipples


427

SP15

"Close" nipples are those with threads that almost touch from both sides. They are the shortest possible length.

90º STREET ELL (MNPT X SLIP)MODEL SIZE EACH

410005-AQ 1⁄2" $.56 $.48/50+

410007-AQ 3⁄4" .66 .56/50+

410010-AQ 1" 1.10 .94/50+410012-AQ 11⁄4" 1.54 1.31/25+410015-AQ 11⁄2" 1.61 1.37/25+410020-AQ 2" 3.96 3.37/10+410101-AQ 3⁄4" x 1⁄2" .80 .68/50+

UNION (FNPT X FNPT) SCHEDULE 80, WITH O-RINGMODEL SIZE EACH

458005 1⁄2" $1.98 $1.58/10+

458007 3⁄4" 2.48 1.98/10+

458010 1" 3.79 3.03/10+458012 11⁄4" 5.15 4.12/5+458015 11⁄2" 6.38 5.11/5+458020 2" 10.23 8.19/5+

UNION (SLIP X SLIP) SCHEDULE 80, WITH O-RINGMODEL SIZE EACH

457005 1⁄2" $1.98 $1.58/10+

457007 3⁄4" 2.48 1.98/10+

457010 1" 3.79 3.03/10+457012 11⁄4" 5.15 4.12/5+457015 11⁄2" 6.38 5.11/5+457020 2" 10.23 8.19/5+

PLUG (MNPT)MODEL SIZE EACH

450005 1⁄2" $.70 $.60/50+

450007 3⁄4" .75 .64/50+

450010 1" 1.22 1.04/50+450012 11⁄4" 1.28 1.09/25+450015 11⁄2" 1.38 1.17/25+450020 2" 1.78 1.51/10+450030 3" 3.74 3.18/10+450040 4" 8.43 7.17/6+

LONG SWEEPTo keep friction losses low, it’s best to use sweeps as opposed to elbows in plumbing systems. These long sweeps are low-pressure rated to 30 psi. PVC compatible with Schedule 40, 160 and DWV size pipes. Female socket on both ends. Made in USA.

MODEL SIZE EACH

SP15 11⁄2" $4.36

SP20 2" 5.65

SP30 3" 10.76SP40 4" 19.00

PLUMBINGUnions/Plug/Long Sweep/Reducer Bushing

REDUCER BUSHING (SPIG X SPIG) MODEL SIZE EACH

437101 3⁄4" x 1⁄2" $ .27 $.23/50+

437130 1" x 1⁄2" .48 .41/50+

437131 1" x 3⁄4" .48 .41/50+437166 11⁄4" x 1⁄2" .65 .55/25+437167 11⁄4" x 3⁄4" .66 .56/25+437168 11⁄4" x 1" .65 .55/25+437209 11⁄2" x 1⁄2" .70 .60/25+437210 11⁄2" x 3⁄4" .70 .60/25+437211 11⁄2" x 1" .70 .60/25+437212 11⁄2" x 11⁄4" .70 .60/25+437247 2" x 1⁄2" 1.15 .98/10+437248 2" x 3⁄4" 1.15 .98/10+437249 2" x 1" 1.15 .98/10+437250 2" x 11⁄4" 1.15 .98/10+437251 2" x 11⁄2" 1.15 .98/10+437334 3" x 3⁄4" 2.72 2.31/10+437335 3" x 1" 2.72 2.31/10+437336 3" x 11⁄4" 2.72 2.31/10+437337 3" x 11⁄2" 2.72 2.31/10+437338 3" x 2" 2.72 2.31/10+437420 4" x 2" 6.09 5.18/6+437422 4" x 3" 6.09 5.18/6+


MALE ADAPTER (MNPT X SLIP)MODEL SIZE EACH

436005 1⁄2" $.23 $.20/50+

436007 3⁄4" .25 .21/50+

436010 1" .46 .39/50+436012 11⁄4" .57 .48/25+436015 11⁄2" .76 .65/25+436020 2" .99 .84/25+436030 3" 4.27 3.63/10+436040 4" 5.44 4.62/6+

428

FEMALE ADAPTER (SLIP X FNPT)

FEMALE ADAPTER REDUCING (SLIP X FNPT)

MODEL SIZE EACH

435005 1⁄2" $.29 $.25/50+

435007 3⁄4" .37 .31/50+

435010 1" .42 .36/50+435012 11⁄4" .65 .55/25+435015 11⁄2" .76 .65/25+435020 2" 1.01 .86/10+435030 3" 3.44 2.92/10+435040 4" 5.70 4.85/6+

COUPLING (SLIP X SLIP) MODEL SIZE EACH

429005 1⁄2" $.17 $.14/50+

429007 3⁄4" .23 .20/50+

429010 1" .41 .35/50+429012 11⁄4" .56 .48/25+429015 11⁄2" .60 .51/25+429020 2" .88 .75/10+429030 3" 3.18 2.70/10+429040 4" 4.61 3.92/6+429060 6" 14.56 12.38/4+

REDUCER COUPLING (SLIP X SLIP) MODEL SIZE EACH

429101 3⁄4" x 1⁄2" $.42 $.36/50+

429131 1" x 3⁄4" .72 .61/50+

429168 11⁄4" x 1" 1.22 1.04/25+429212 11⁄2" x 11⁄4" 1.29 1.10/25+429251 2 x 11⁄2" 2.05 1.74/10+

T.T. BUSHING (MNPT X FNPT)MODEL SIZE EACH

439072 1⁄2" x 1⁄4" $1.22 $1.04/50+

439073 1⁄2" x 3⁄8" 1.22 1.04/50+

439098 3⁄4" x 1⁄4" .76 .65/50+439099 3⁄4" x 3⁄8" .76 .65/50+439101 3⁄4" x 1⁄2" .76 .65/50+439130 1" x 1⁄2" 1.05 .89/50+439131 1" x 3⁄4" 1.05 .89/50+439168 11⁄4" x 1" 1.57 1.33/25+439210 11⁄2" x 3⁄4" 1.90 1.62/25+439211 11⁄2" x 1" 1.90 1.62/25+439212 11⁄2" x 11⁄4" 1.90 1.62/25+439251 2" x 11⁄2" 2.03 1.73/10+

COUPLING (FNPT X FNPT)MODEL SIZE EACH

430005 1⁄2" x 1⁄2" $.32 $.27/50+

430007 3⁄4" x 3⁄4" .60 .51/50+

430010 1" x 1" .79 .67/25+

REDUCER BRUSHING (SPIG X FNPT)MODEL SIZE EACH

438071 1⁄2" x 1⁄8" $.57 $.48/50+

438072 1⁄2" x 1⁄4" .57 .48/50+

438101 3⁄4" x 1⁄2" .42 .36/50+438130 1" x 1⁄2" .69 .59/50+438131 1" x 3⁄4" .69 .59/50+438166 11⁄4" x 1⁄2" 1.05 .89/25+438167 11⁄4" x 3⁄4" 1.05 .89/25+438168 11⁄4" x 1" 1.05 .89/25+438209 11⁄2" x 1⁄2" 1.22 1.04/25+438210 11⁄2" x 3⁄4" 1.22 1.04/25+438211 11⁄2" x 1" 1.22 1.04/25+438212 11⁄2" x 11⁄4" 1.22 1.04/25+438247 2" x 1⁄2" 1.63 1.39/10+438248 2" x 3⁄4" 1.63 1.39/10+438249 2" x 1" 1.63 1.39/10+438250 2" x 11⁄4" 1.63 1.39/10+438251 2" x 11⁄2" 1.63 1.39/10+438334 3" x 3⁄4" 2.72 2.31/10+438335 3" x 1" 2.72 2.31/10+438336 3" x 11⁄4" 2.72 2.31/10+438337 3" x 11⁄2" 2.72 2.31/10+438338 3" x 2" 2.72 2.31/10+438420 4" x 2" 6.08 5.17/6+438422 4" x 3" 6.08 5.17/6+

MALE ADAPTER REDUCING (MNPT X SLIP)MODEL SIZE EACH

436074 1⁄2" x 3⁄4" $.46 $.39/50+

436102 3⁄4" x 1" .65 .55/50+

436132 1" x 11⁄4" 1.54 1.31/50+436169 11⁄4" x 11⁄2" 1.74 1.48/25+436213 11⁄2" x 2" 2.09 1.78/25+

MODEL SIZE EACH 50+

435074 1⁄2" x 3⁄4" $.51 $.43

435101 3⁄4" x 1⁄2" .51 .43

435102 3⁄4" x 1" .69 .59435131 1" x 3⁄4" .69 .59

PLUMBINGBushings/Couplings/Adapters



429429PLUMBINGWrench/Rubber Sheet/File/Flanges/Gaskets/Bolts Sets

854005

854010G

NRB16

Boa Constrictor® is a registered trademark of Boa (UK) LLC.

STRAP WRENCHWhen traditional wrenches aren’t right for your job, use a strap wrench to grip almost any shape object without marring. For use on plastic pipe, tubing, hand wheels, and items with highly polished surfaces. Straps resist oils and solvents. RS10 and RS25 have a polypropylene handle and synthetic rubber strap. RS28 has an aluminum handle and synthetic rubber strap.

PLASTIC RUBBER SHEETGood for most general purpose applications. This plastic rubber holds up well to oil, water, abrasion and weather. When used for making gaskets, it conforms to irregular flange joints and seals well under minimum bolt loads. Temp: -20 to 220°F. Tensile strength: 800 psi. Sheet is 36" wide and sold by the foot (buy one foot and get 3 square feet).

MODEL THICKNESS COLOR EACH FOOT

NRB16 1⁄16" BLACK $9.28RRB16 1⁄16" RED 7.93RRB18 1⁄8" RED 14.33

UNIVERSAL THREAD FILEThis one-blade thread file renews all 60-degree threads, even metric and foreign. Relieves oversized threads, right or left hand, and is a handy addition to any tool kit.

ANSI FLANGES, VAN STONE STYLEThese ANSI flanges, Van Stone style, utilize two pieces with center socket loose from the flange portion until tightened. Maximum 150 PSI. Gaskets and bolts are not included; see selection below for Gasket & Bolt Sets (sold separately).

854060

RS25

Note: Bolts are not stainless steel.

MODEL EACH

UTF $7.50

HANDLE FITS STRAP SIZE MODEL LENGTH DIAMETER W L THICKNESS EACH

RS10 6” ½ - 4” ½” 20” ⅛” $9.95RS25 8” ¾ - 6¾” ¾” 24” 3/16” 19.95RS28 8” ¾ - 12” ¾” 38” 3/16” 29.95

GASKET & BOLT SETSManufactured to ANSI specifications, these gasket & bolt sets are sized to fit the ANSI Flanges, Van Stone style, listed above. Each set includes one flange gasket, set of 4, 8 or 12 bolts, and set of 4, 8 or 12 nuts. Bolts are not stainless steel. These sets are for flange-to-flange connections.

FLANGE SIZE SHIP WT RECOMMENDED MODEL (ANSI DIA.) (LBS) EACH GASKET/BOLT SET

854005 ½” 1 $7.23 —

854007 ¾” 1 7.74 —

854010 1” 1 8.61 854010G

854012 1¼” 1 8.87 —

854015 1½” 1 9.05 —

854020 2” 2 12.05 854020G

854030 3” 3 20.58 854030G

854040 4” 4 26.03 854040G

854050 5” 5 40.94 —

854060 6” 5 40.94 854060G

854080 8” 6 66.67 854080G

854100 10” 8 86.32 854100G

854120 12” 10 93.06 854200G

BOLT BOLT NO. OF FITS ANSI SHIP WT MODEL LENGTH DIA. BOLTS/NUTS FLANGE DIA. (LBS) EACH

854010G 2” ½” 4/4 1” 1 $11.75854020G 3” ⅝” 4/4 2” 1 13.25854030G 3” ⅝” 4/4 3” 1 21.75854040G 3” ⅝” 8/8 4” 2 23.00854060G 3½” ¾” 8/8 6” 3 24.50854080G 3½” ¾” 8/8 8” 3 29.00854100G 4” ⅞” 12/12 10” 3 35.00854200G 4” ⅞” 12/12 12” 3 38.00


?????

511

IMMERSE YOURSELF AT PENTAIRAES.COM

PENTAIR AT A GLANCE

Documents

PLUMBING PRODUCTS - Pentair Aquatic Eco-Systems...facilities in the retail and wholesale aquarium trade, research and grow-out aquaculture operations, and biomedical research facilities