Portable Cat Keke Gen Rg b

Portable cutting andwelding catalogue

Applications

Portable cutting

Applications for cutting

Straigt Line Shape Hole Curved Line H-shapesteel

Various steelshape

Pipe Square pipe Verticalsurfaces

Handy AutoHandy Auto PlusPla-HandyIK-92 Puma – – – – – –Beaver – – – – –IK-12 Beetle – – – – – –IK-12 Max 3 – – – – – –Picle-1 – – – – – – – –Auto Picle-S – – – – – – – –Auto Picle-P – – – – – – – –KHC-600D – – – – – – –KHC-600P – – – – – – –IK-72T – – – – – –IK-70 – – – – – – – –Cir-Cut II – – – – – – – –IK-82 Series – – – – – – –Mini-Mantis II – – – – – –IK-54D – – – – –IK-05 Lug-Cut – – – – – – – –

Directory

Handy Auto 6

Handy Auto Plus 8

Pla-Handy 10

IK-92 Puma 12

Beaver 14

IK-12 Beetle 16

IK-12 Max 3 18

Picle-1 20

Auto Picle-S 22

Auto Picle-P 24

KHC-600D 26

KHC-600P 28

IK-72T 30

IK-70 32

Cir-Cut II 34

IK-82 Series 36

Mini-Mantis II 38

IK-54D 40

IK-05 Lug-Cut 42

IK-12 Max 3W 44

Wel-Handy-Multi 46

SilverCut-250 48

MK-150 50

MK-250 52

MK-300 54

Directory

Cutting nozzles 58

Cutting nozzle 102 HC (Acetylene) 58

Cutting nozzle 106 HC (Propane) 58

Cutting nozzle 107 HC (Natural gas) 59

Cutting nozzle 402 ST (Acetylene) 59

Cutting nozzle 406 NT (Propane) 60

Cutting nozzle 102 Lug-Cut (Acetylene) 60

Cutting nozzle 106 Lug-Cut (Propane) 61

Machine cutting nozzles 62

Cutting nozzle 102 D5 (Acetylene) 62

Cutting nozzle 102 D7 (Acetylene) 62

Cutting nozzle 103 D7 (Ethylene) 63

Cutting nozzle 106 D5 (Propane) 63

Cutting nozzle 106 D7 (Propane) 64

Cutting nozzle 107 D7 (Natural gas) 64

Notes

5

Handy Auto

Handy AutoPortable hand cutting torch withintegrated drive system

The Handy Auto is a portable hand held gas cutting torchwith an integrated drive system. It ensures highest cutquality in vertical, circular and shape cutting as well asbeveling. Besides cutting of flat surfaces it is also possibleto perform curved contours on vertical surfaces like H-beams, pipes and bended plates. Thanks to the low weightof 2,7 kg Handy Auto can be used as simple as an ordinaryhand cutting torch.

n Easy to operaten Outstanding quality of cut surfacesn Allows cutting in any directionn High accuracy and efficiencyn Simple and fast accessory replacement

6

Technical specifications

Cutting thickness 3-30 mmCutting speed 200-700 mm /minType of drive Transistor control /friction drivePower supply 230 V AC /12 V DCTotal length 500 mmType of gas Acetylene, propane, natural gas and mapp

gasWeight 2,7 kg

Types

Description Art-No Alternative No.Handy Auto 580000101000 90005Please indicate type of gas with your order

Scope of delivery

Portable cutting machine Handy AutoGuide wheel for straight cuttingGuide wheel for bevel cuttingCircle cutting device (30-120 mm Ø)Guide armCutting nozzles (5-30 mm material thickness)Main lead (5 m)Tool setOperation instructionsTransport box

Accessories

Description Art-No Alternative No.Circle Cutt. Attachm. 120-500 mm 580000101011 30106Battery Pack set (12 V) 580000101012 225.401.101Connecting bar (530 mm) 580000101013 30132Guide rail 500 mm 580000103002 30104

Circle Cutt. Attachm. 120-500 mm

Battery Pack set (12 V)

Connecting bar (530 mm)

Guide rail 500 mm

7

Handy Auto Plus

Handy Auto PlusPortable hand cutting torch withintegrated drive system

The Handy Auto Plus is a portable hand held gas cuttingmachine with an integrated drive system, ignition deviceand Start-Stop-function for pre-heating flame. It ensureshighest cut quality in vertical, circular and shape cuttingas well as beveling. Besides cutting of flat surfaces it isalso possible to perform curved contours on verticalsurfaces like H-beams, pipes and bended plates. Thanksto the low weight of 3,5 kg Handy Auto Plus can be usedas simple as an ordinary hand cutting torch.

n Auto ignitionn Start-Stop-function for pre-heating flamen Outstanding quality of cut surfaces n Allows cutting works in any direction n High accuracy and efficiencyn Simple and fast accessory replacement

8


Cutting thickness 3-30 mmCutting speed 150-530 mm /minType of drive Transistor control /friction drivePower supply 230 V AC /12 V DCTotal length 500 mmType of gas Acetylene, propane, natural gas and mapp

gasWeight 3,5 kg

Types

Description Art-No Alternative No.Handy Auto Plus 580000101001 90001Please indicate type of gas with your order

Scope of delivery

Portable cutting machine Handy Auto PlusGuide wheel for straight cuttingGuide wheel for bevel cuttingCircle cutting device (30-120 mm Ø)Guide armCutting nozzles (5-30 mm material thickness)Main lead (5 m)Tool setOperation instructionsTransport box

Accessories

Description Art-No Alternative No.Circle Cutt. Attachm. 120-500 mm 580000101011 30106Battery Pack set (12 V) 580000101012 225.401.101Connecting bar (530 mm) 580000101013 30132Guide rail 500 mm 580000103002 30104


Battery Pack set (12 V)

Connecting bar (530 mm)

Guide rail 500 mm

9

Pla-Handy

Pla-HandyHand cutting torch for plasmacutting

The Pla-Handy is a portable hand held, motorized cuttingtorch for plasma cutting with integrated drive for all kindof cutting operations such as straight and curved lines inflat as well as bent plates, H-beams and pipes.The Pla-Handy enures highest quality in straight and bevelcutting at circular and shaped contours.Thanks to the low weight of 1,5 kg the Pla-Handy is as easyto use as a simple plasma cutting machine.

n High quality cuts at all types of metal (steel, stainless steel,aluminum, etc.) due to plasma torch

n Easy to use, one hand operationn Cutting in any positionn High accuracy and efficiencyn Easy and fast replacement of consumablesn Suitable for Powermax PM65 /PM85 /PM1650

Aluminum cutting

10


Cutting thickness dependent on source of currentCutting speed 100-2000 mm /minType of drive Transistor control, continuous adjustablePower supply 230 V AC /12 V DCTotal length 450 mmWeight 1,5 kg

Types

Description Art-No Alternative No.PLA-Handy (mild steel) 580000103000 90009PLA-Handy (stainless) 580000103003 90010

Scope of delivery

Base machine Pla-HandyGuide wheel for straight cuttingCircle cutting equipment (30-120 mm Ø)Magnetic centering pin for steelCentering pin with vacuum rubber for stainless steelAuxiliary wheelConnecting lead (5 m)Tool setOperation instructionsTransport box

Accessories

Description Art-No Alternative No.Circle Cutt. Attachm. 120-500 mm 580000101011 30106Guide rail 500 mm 580000103002 30104Circle Cutt. Attachm. 120-500 mm* 580000103010 35584Suction holder f. large circle 580000103011 12377Bush f. small cutting attachm. 580000103012 12363Bevel cutting attachment 580000103013 12386Guide rail with suction holder 580000103014 35582* with suction holder


Guide rail 500 mm

11

IK-92 Puma

IK-92 PumaPortable cutting machine

The IK-92 Puma is a unique portable cutting machine forprecise vertical, bevel and circle cutting. The design is box-shaped and has a low balance point. This guarantees ahigh stability and exact motion sequences.The machine is equipped with an efficient heat protection,consisting of a double heat shield and a cooling fan withinthe main body.

n Ultra stable machine travel assures high-qualityautomatic cutting

n One hand operation and control of all functionsn Heat prevention systemn Easy maintenance due to simple, clean design

12


Cutting thickness 3-100 mmCutting speed 100-1000 mm /minType of drive IC control, continuous adjustablePower supply 42 V /115 V /230 V ACTotal length 480 mmTrack width 100 mmType of gas Acetylene, propane, natural gas and mapp

gasWeight 8,0 kg

Types

Description Art-No Alternative No.IK-92 Puma, 230 V 580000104000 90014IK-92 Puma, 115 V 580000104001 90013IK-92 Puma, 42 V 580000104002 90012Please indicate type of gas with your order

Scope of delivery

Cutting machine IK-92 PumaCutting nozzles (5-30 mm material thickness)Connecting lead (5 m)Tool setOperation instructions

Accessories

Description Art-No Alternative No.Rail f. straight cutting (1800 mm) 580000104010 90018Circle cutting attachment 580000104011 33353Plate edge guide roller f. bevelling 580000104012 36959Transformer 230 V /42 V 580000104013 222.002.207Transformer 230 V /115 V 580000104014 90100

Circle cutting attachment

13

Beaver

BeaverUniversal hand cutting machine

The Beaver is an universal hand cutting machine for bothstraight line and curved line cutting. Bevel cuts areachieved by an angle tracing roller.The unique design and the adjustable distance betweenguide wheel and drive axle achieves best cutting results.A long distance between guide wheel and drive axleensures accurate vertical and bevel cuts, a tighterdistance guarantees exact scanning accuracy for curvedline cutting.

n Moveable guide wheel assures precision cutting of straightand curved lines

n Single hand operation and control of all functionsn Optional auto-stop function

14


Cutting thickness 3-150 mmCutting speed 50-1000 mm /minType of drive IC control, continuous adjustablePower supply 42 V /115 V /230 V ACTotal length 430 mmTrack width 100 mmType of gas Acetylene, propane, natural gas and mapp

gasWeight 9,0 kg

Types

Description Art-No Alternative No.Beaver, 230 V 580000105000 90015Beaver, 115 V 580000105001 90016Beaver, 42 V 580000105002 90017Please indicate type of gas with your order

Scope of delivery

Cutting machine BeaverCutting nozzle (5-30 mm material thickness)Connecting lead (5 m)Tool setOperation instructions

Accessories

Description Art-No Alternative No.Rail f. straight cutting (1800 mm) 580000104010 90018Circle cutting attachment 580000104011 33353Transformer 230 V /42 V 580000104013 222.002.207Transformer 230 V /115 V 580000104014 90100Angle tracing roller 580000105012 33363Auto Stopping Device 580000105015 33364

Circle cutting attachment

Angle tracing roller

15

IK-12 Beetle

IK-12 BeetleHigh quality motorized hand cuttingmachine

The IK 12 Beetle is a high quality motorized hand cuttingmachine. The operator can perform all types of cutting withease (vertical, circle and bevel cutting).The drive system (continuous mechanical feed change)guarantees a constant and stable movement of themachine. The travel functions (forwards, backwards, stop)are activated only by one operation element. The clutchcontrol assures an trouble-free positioning of themachine. Bevel cutting is achieved by simply adjusting thetorch holder at the bottom edge of the plate. A gear rack/bevel drive ensures an precise positioning of the machinetorch (Y- and Z-axis).

n The travel functions (forwards, backwards, stop) are activatedonly by one operation element.

n The drive system (continuous mechanical feed change)guarantees a constant and stable movement of the machine.

n Low weight of 9.5 kg (Easy handling and transport)n Attaching two machine torches allows parallel- and

Y-bevel cutting.

16


Cutting thickness 3-150 mmCutting speed 150-880 mm /minType of drive Single cone speed system, mechanical

regulationPower supply 42 V /115 V /230 V ACTotal length 480 mmTrack width 140 mmType of gas Acetylene, Propane, natural gas and mapp

gasWeight 9,5 kg

Types

Description Art-No Alternative No.IK-12 Beetle, 230 V, Single 580000106000 90020IK-12 Beetle, 115 V, Single 580000106001 90021IK-12 Beetle, 42 V, Single 580000106002 90022IK-12 Beetle, 230 V, Duo 580000106003 90023IK-12 Beetle, 115 V, Duo 580000106004 90024IK-12 Beetle, 42 V, Duo 580000106005 90025Please indicate type of gas with your order

Scope of delivery

Cutting machine IK-12 BeetleCutting nozzles (5-30 mm material thickness)Connecting lead (5 m)Operation instructions

Accessories

Description Art-No Alternative No.Transformer 230 V /42 V 580000104013 222.002.207Transformer 230 V /115 V 580000104014 90100Rail f. straight cutting (1800 mm) 580000106010 30400Circle cutt. attachment 580000106011 31858Beveling attachment 580000107023 ON002

Rail f. straight cutting (1800 mm)

Beveling attachment

17

IK-12 Max 3

IK-12 Max 3Cutting and welding at highestquality

The IK 12 Max 3 is the premium product of our assortment!This motorized hand cutting machine allows differenttypes of oxy-fuel/plasma cutting and automated welding.There are three major parts to the system. The advancedmotorized carriage, a cutting torch unit, the plate track andaccesories. All serving as independent units, the customercan choose the system for his specific requirements.The Speed Control utilizes an exclusive KOIKE DoubleCone Stepless Speed System, which functions with acondensor motor rotating at regular speed to prevent heatand voltage problems. In addition, the condensor motorrotates at a constant low speed ( 1,500 rpm), extendingthe service life of bearings.

n Outstanding performancen Unrivaled robust and heat-proof machinen Excellent tractionn Steady travel due to a well balanced center of gravityn Very high number of operation hours (more than 5000 h)

due to the double cone driven Speed (80-800 mm /min.) High Speed (240-2400 mm /

min.) n Heat protection shield on the cutting side and the base plate n Gas and plasma cutting as well as automated weldingn Cutting area of 0,5 to 600 mmn Easy maintenance

Rail f. straight cutting (1800 mm) Circle rail

18


Cutting thickness 0,5-600 mmCutting speed (Standard type) 80-800 mm /minCutting Speed (High speed) 240-2400 mm /minType of drive Double cone speed system, mechanical

regulationPower supply 42 V /115 V /230 V ACTotal length 430 mmTrack width 140 mmType of gas Acetylene, propane, natural gas and mapp

gasWeight 10,0 kg

Types

Description Art-No Alternative No.IK-12 MAX 3, 230 V 580000107000 90027IK-12 MAX 3, 115 V 580000107001 90028IK-12 MAX 3, 42 V 580000107002 90029IK-12 MAX 3, High Speed, 230 V 580000107003 90026IK-12 MAX 3, High Speed, 115 V 580000107004 90057IK-12 MAX 3, High Speed, 42 V 580000107005 90056Please indicate type of gas with your order

Scope of delivery

Base machine IK-12 Max 3Connecting leadOperation instructions

Accessories

Description Art-No Alternative No.Torch Set S-100 580000107030 90036Torch Set SP-100 580000107032 90038Burner set L-100 heavy duty type 580000107036 90042Torch Set Epoch 300 580000107037 90043Torch Set S-200 580000107031 90037Torch Set SP-200 580000107033 90039Torch Set SP-300 580000107034 90040Torch Set SP-400 580000107035 90041Torch Set Epoch 600 580000107038 90046Transformer 230 V /42 V 580000104013 222.002.207Transformer 230 V /115 V 580000104014 90100Rail f. straight cutting (1800 mm) 580000106010 30400Magnet to fix rail 580000107010 D6010Heavy duty rail for thick plate cutting 580000107011 90044Circle rail 580000107012 30410Circle cutt. attachment 580000107013 30389Slide bar 250 mm 580000107014 30430Slide bar 300 mm 580000107015 30431Pipe arm 500 mm 580000107017 30321Pipe arm 1000mm 580000107018 30425Pipe arm 2500mm 580000107019 30429Hose set dist 1.2 meter 580000107020 222.023.926Hose set dist (2.7 meter length) 580000107021 222.023.931Snap Valve 580000107022 80512Beveling attachment 580000107023 ON002

Torch Set S-100

Torch Set SP-100

Burner set L-100 heavy duty type

Torch Set Epoch 300

19

Picle-1

Picle-1Manually operated pipe cuttingmachine

The Picle-1 is a manually operated oxy-fuel pipe cuttingmachine for trimming and beveling pipes. The chain driveis achieved by over a large worm and a worm wheel. Thelow transmission ratio leads to an absolutely frictionlessfeed.The transmission chain consists of simply constructed,smoothly interlocking chain links. Due to the chain links'easy insertion and removal, a fast exchange for varyingpipe diameter is guaranteed. The adjustments for bevelcutting is ensured by an angle scale at the torch bracket.

n Standard chain for cutting pipe diameter of 114 - 600 mmn Extension chain (1 m) for large pipe diametern The low transmission ratio leads to an absolutely

frictionless feed.n The torch adjustments for bevel cutting is achieved

by an angle scale.n Easy operation and maintenancen Low weight

20


Cutting thickness 5-50 mmType of drive manuallyHeight 400 mmTrack width 230 mmType of gas Acetylene, propane, natural gas and mapp

gasWeight 9,0 kg

Types

Description Art-No Alternative No.Picle-1 580000108000 90110Please indicate type of gas with your order

Scope of delivery

Cutting machine Picle 1Cutting nozzles (5-30 mm material thickness)Tool setOperation instructions

Accessories

Description Art-No Alternative No.Chain extension 1 m 580000108010 31131

Chain extension 1 m

21

Auto Picle-S

Auto Picle-SPipe cutting machine withmotorized drive

Auto Picle-S is a motorized oxy-fuel pipe cutting machinewith remote control. The special guiding system with thefixed guiding rail for thr torch tip guarantees a high cuttingaccuracy, especially when cutting large pipe diameters.By using the motorized drive for trimming and bevelingpipes, highest quality will be achieved. The transmissionchain consists of simply constructed, smoothlyinterlocking chain links. Due to the chain links' easyinsertion and removal, a fast exchange for varying pipediameter is guaranteed. The adjustments for bevel cuttingis ensured by an angle scale at the torchbracket.

n Especially developed for pipe oxy-fuel cuttingn Guiding system with fixed guiding rail n Cutting of vertical pipes possible n Simple adjustment of varying pipe diametern Operation by remote control

22


Cutting thickness 5-50 mmCutting speed 100-700 mm /minType of drive PWM with remote controlPower supply 42 V /115 V ACHeight 400 mmTrack width 230 mmType of gas Acetylene, propane, natural gas and mapp

gasWeight 15,0 kg

Types

Description Art-No Alternative No.Auto Picle-S, 115 V 580000109001 90116Auto Picle-S, 42 V 580000109002 90117Please indicate type of gas with your order

Scope of delivery

Pipe cutting machine Auto Picle-SChain 2400 mm length (Pipe diameter 600 mm)Cutting nozzle (5-30 mm material thickness)Connecting lead (5 m)Tool setOperation instructions

Accessories

Description Art-No Alternative No.Transformer 230 V /42 V 580000104013 222.002.207Transformer 230 V /115 V 580000104014 90100Chain extension 1 m 580000108010 31131Guide Rail D-600 incl. chain 580000109010 90106Guide Rail D-900 incl. chain 580000109011 90107Guide Rail D-1200 incl. chain 580000109012 90108Guide Rail D-1500 incl. chain 580000109013 90109

Chain extension 1 m

Guide Rail D-600 incl. chain

23

Auto Picle-P

Auto Picle-PPipe cutting machine for plasmacutting

Auto Picle-P is a motorized pipe cutting machine withremote control for cutting with plasma. The special guidingsystem with the fixed guiding rail for the torch tipguarantees a high cutting accuracy, especially whencutting large pipe diameters.By using the motorized drive for trimming and bevelingpipes, highest quality will be achieved. The transmissionchain consists of simply constructed, smoothlyinterlocking chain links. Due to the chain links' easyinsertion and removal, a fast exchange for varying pipediameter is guaranteed. The adjustments for bevel cuttingis ensured by an angle scale at the torchbracket.

n Especially developed for pipe plasma cuttingn Guiding system with fixed guiding rail n Cutting of vertical pipes possible n Simple adjustment of varying pipe diametern Operation by remote controln Suitable for Powermax PM65 /PM85 /PM1650

24


Cutting thickness dependent on power sourceCutting speed 500-3000 mm /minType of drive S.C.R. control with remote controlPower supply 115 V ACHeight 400 mmTrack width 230 mmWeight 15,0 kg

Types

Description Art-No Alternative No.Auto Picle-P, 115 V 580000110000 90119

Scope of delivery

Pipe cutting machine Auto Picle-PChain 2400 mm length (Pipe diameter 600 mm)Connecting lead (5 m)Tool setOperation instructions

Accessories

Description Art-No Alternative No.Transformer 230 V /115 V 580000104014 90100Chain extension 1 m 580000108010 31131Guide Rail D-600 incl. chain 580000109010 90106Guide Rail D-900 incl. chain 580000109011 90107Guide Rail D-1200 incl. chain 580000109012 90108Guide Rail D-1500 incl. chain 580000109013 90109

Chain extension 1 m

Guide Rail D-600 incl. chain

25

KHC-600D

KHC-600DAutomatic pipe hole cuttingmachine

The KHC-600D is a portable automatic oxy-fuel pipe holecutting machine. The main application is the accuratecutting of holes with or without bevel in pipes, high-pressure storage tanks and heat exchangers. An eccentricmechanism guarantees an exact adjustment of the stroke(vertical travel of the torch). The rotational joint at the gassupply prevents entangling hoses and a repositioning ofthe machine to its home position.

n Compact designn Cuts a vessel from the inside as well as from the outsiden Easy positioning for cutting by the use of centering pin

(circle diameter 60 - 600 mm)n Bevel cuts till 45° possible n No entangling hoses due to rotational joint

26


Cutting thickness 5-50 mmCutting diameter 60-600 mmVertical torch stroke 0-100 mmType of drive SCR controlCutting speed 0,12-1,2 rpmPower supply 42 V /115 V ACMachine dimensions (WxHxD) 500 mm x 760 mm x 1050 mmType of gas Acetylene, propane, natural gas and mapp

gasWeight 26,0 kg

Types

Description Art-No Alternative No.KHC-600D, 115 V 580000111001 90121KHC-600D, 42 V 580000111002 90122Please indicate type of gas with your order

Scope of delivery

Cutting machine KHC-600 DCutting nozzles (5-30 mm material thickness)Connecting lead (5 m)Tool setOperation instructions

Accessories

Description Art-No Alternative No.Transformer 230 V /42 V 580000104013 222.002.207Transformer 230 V /115 V 580000104014 90100Fixture f. small diameters 580000111010 90123Over-Hang Kit 580000111011 90125

Transformer 230 V /42 V

27

KHC-600P

KHC-600PPipe hole cutting machine forplasma cutting

The KHC-600P is a portable automatic pipe hole cuttingmachine. It can be equipped with plasma equipment. Mainapplications are the accurate cutting of holes with orwithout bevel, through the casing of the pipes, high-pressure storage tanks and heat exchangers.An eccentric apparatus guarantees an exact adjustmentof the stroke (vertical travel of the torch).

n An eccentric shaft guarantees an exact adjustmentof the stroke.

n Compact Design n Suits for cutting inside as well as upon the pipe n Easy positioning for cutting by the use of centering pin n Bevel cuts up to 45° possiblen Suitable for Powermax PM65 /PM85 /PM1650

28


Cutting thickness Dependent on the current sourceCutting diameter 120-600 mmVertical torch stroke 0-100 mmCutting speed 0,24-2,42 rpmType of drive SCR controlPower supply 42 V ACMachine dimensions (WxHxD) 500 mm x 980 mm x 1200 mmWeight 52,0 kg

Types

Description Art-No Alternative No.KHC-600P 580000111003 90124

Scope of delivery

Base machine KHC 600 PConnecting lead (5 m)Tool setOperation instructions

Accessories

Description Art-No Alternative No.Transformer 230 V /42 V 580000104013 222.002.207Fixture f. small diameters 580000111010 90123Over-Hang Kit 580000111011 90125


29

IK-72T

IK-72TThree dimensional cutting machine

The IK-72T is a portable automatic oxy-fuel cuttingmachine for all positions (three dimensional). There arethree different types of rails. The 1D extendable aluminumrail allows cutting of even surfaces. The extendable 2D/3Dflex tracks made of hard rubber with flexible steel pipes inthe inside allow cuts in the second and third dimension.All rails are delivered with magnetic holder enabling cutsin vertical and horizontal positions. The low weight (4,5 kg)and the outstanding rigid mechanics (gear rack/beveldrive and lateral guide rolls) assure high quality cuttingaccuracy.

n Three rail types for a substantial working arean Easy to operaten Outstanding rigid mechanics n High quality of cutting accuracy

30


Cutting thickness 5-50 mmCutting speed 150-700 mmType of drive PWMPower supply 42 V /115 V ACType of gas Acetylene, propane, natural gas and mapp

gasWeight 4,5 kg

Types

Description Art-No Alternative No.IK-72 T, 115 V 580000113001 90151IK-72 T, 42 V 580000113002 90152Please indicate type of gas with your order

Scope of delivery

Cutting machine IK-72TCutting nozzles (5-30 mm material thickness)Connecting lead (5 m)Tool setOperation instructions

Accessories

Description Art-No Alternative No.Transformer 230 V /42 V 580000104013 222.002.207Transformer 230 V /115 V 580000104014 901001D-cutting rail 1.500 mm 580000113010 901532D-cutting rail 1.000 mm 580000113011 901543D-cutting rail 1.000 mm 580000113012 90155Connection aluminium/rubber 580000113013 33107

1D-cutting rail 1.500 mm



31

IK-70

IK-70Automatic circle cutting machine

The IK-70 is a portable automatic oxy-fuel circle cuttingmachine, especially designed for cutting circles, with orwithout bevel, on even surfaces allowing to cut circles witha diameters of 30-1000 mm. The accordinglydimensioned base late rests upon four movable balls andallows a fast positioning of the IK-70. Another advantageis the compact and solid control system which improvesthe speed stabilization especially at extremely low travelspeeds.

n Compact control unitn Low weight and high stabilityn No entangling hoses due to the rotating gas manifoldn Simple positioning mechanismn Variable operation possibilities

32


Cutting thickness 5-50 mmCutting diameter 30-1000 mmCutting speed 0,2-6 rpm or 0,04-1,5 rpmType of drive SCR Ward LeonardPower supply 115 V ACType of gas Acetylene, propane, natural gas and mapp

gasWeight 55,0 kg

Types

Description Art-No Alternative No.IK-70, 115 V 580000115001 90081Please indicate type of gas with your order

Scope of delivery

Cutting machine IK-70Cutting nozzles (5-30 mm material thickness)Connecting lead (5 m)Tool setOperation instructions

Accessories

Description Art-No Alternative No.Transformer 230 V /115 V 580000104014 90100


33

Cir-Cut II

Cir-Cut IIPortable automatic circle cuttingmachine

Cir-Cut II is a portable automatic oxy-fuel circle cuttingmachine especially designed for circle cutting with orwithout bevel, on even surfaces, in horizontal and verticalpositions.A powerful electromagnet simplifies cutting in anyposition. The rotating gas manifold prevents from tanglinghoses and a reset of the machine to its home position.

n Low weight (simple operation and transport)n Easy positioning for cutting by the use of centering pin

(circle diameter 40-200 mm)n Bevel cuts till 45° possible n No tangling hoses due to rotating gas manifold

34


Cutting thickness 5-50 mmCutting diameter 40-200 mmCutting speed 0,5-7 rpmType of drive SCR Ward LeonardPower supply 115 V ACType of gas Acetylene, propane, natural gas and mapp

gasWeight 11,0 kg

Types

Description Art-No Alternative No.Cir-Cut II, 115 V 580000114001 90073Please indicate type of gas with your order

Scope of delivery

Cutting machine Cir-Cut IICutting nozzles (5-30 mm material thickness)Connecting lead (5 m)ToolsetOperation instructions

Accessories

Description Art-No Alternative No.Transformer 230 V /115 V 580000104014 90100


35

IK-82 Series

IK-82 SeriesAutomatic joint arm cuttingmachine

The IK-82 is a powerful magnetic tracing type cuttingmachine. The simple design and modular structure havesubstantially reduced the machine weight and provide asystem configuration that ensures easy operation. Themodel comes in three types - S, M, and L, according to theeffective cutting area. Types S and M have aninterchangeable arm pipe, while type L has a rail pipe onthe rail cart, and the length of the rail pipe can be changedaccording to the size of the material to be cut.

n Rail carriage featuring adjustable rail length according to workpiece (Type L).

n Easy tip replacement n Tracer head for handling ease and high-precision cutting. n Light-weight and rugged arm by stainless steel pipe structure

(Types S and M) n Magnetic roller selectable for your requirements

(Types S and M)

36

Technical specifications IK-82 S200

Cutting thickness 5-50 mmCutting range Circles up to 200 mm, ellipses up to 420 x

160 mmMagnet roller 25 mm ØCutting speed 100-900 mm /minType of drive TransistorPower supply 42 V /115 V ACType of gas Acetylene or propaneWeight 7,5 kg

Technical specifications IK-82 M300

Cutting thickness 5-50 mmCutting range Circles up to 300 mm, ellipses up tp 600 x

200 mmMagnet roller 16 mm øCutting speed 100-600 mm /minType of drive TransistorPower supply 42 V /115 V ACType of gas Acetylene or propaneWeight 9,5 kg

Technical specifications IK-82 L900

Cutting thickness 5-50 mmCutting range 900 mm x needed lengthMagnet roller 16 mm øCutting speed 100-600 mm /minType of drive TransistorPower supply 115 V ACType of gas Acetylene or propaneWeight Machine 5,5 kg, carriage 4,0 kg

Types

Description Art-No Alternative No.IK-82 S-200, 115 V 580000116001 90060IK-82 S-200, 42 V 580000116002 90061IK-82 M-300, 115 V 580000116004 90063IK-82 M-300, 42 V 580000116005 90064IK-82 L-900, 115 V 580000116007 90065Please indicate type of gas with your order

Scope of delivery

Cutting machineCutting nozzles (5-30 mm material thickness)Connecting lead (5m)Operation instructions

Accessories

Description Art-No Alternative No.Transformer 230 V /42 V 580000104013 222.002.207Transformer 230 V /115 V 580000104014 90100

Rail for IK-82 L900

Magnet roller 16 mm diameter

37

Mini-Mantis II

Mini-Mantis IIAutomatic H-beam cutting machine

The Mini-Mantis II is a portable automatic H-beam oxy-fuelcutting machine. It is possible to perform fast and preciseweb and flange cuts on beam profiles.The machine features two drive motors: one for webcutting, the other for flange cutting. For cutting webs thecarriage travels along the guide rail, for cutting flanges thetorch is moved by a vertical gear rack. It eliminates theneed for secondary operations.

n Guide rail and main unit are connected (short installationtime)

n Low weight (It is more economic to transport themachine to the work piece)

n Diagonal cuts at the web and flange as well as bevelingis possible till 45°

n SCR control unit for steady feed

38


Cutting thickness 5-40 mmCutting dimensions See aboveCutting speed 100-700 mm /minType of drive SCR controlPower supply 115 V ACMachine dimensions (WxHxD) 500 mm x 760 mm x 1050 mmType of gas Acetylene, propane, natural gas and mapp

gasWeight 20,0 kg

Types

Description Art-No Alternative No.Mini-Mantis II, 115 V, 580000117004 90131Please indicate type of gas with your order

Scope of delivery

Cutting machine Mini Mantis IICutting nozzles (5-30 mm material thickness)Connecting lead(5 m)Tool setOperation instructions

Accessories

Description Art-No Alternative No.Transformer 230 V /115 V 580000104014 90100Rail L600 580000117010 90234Rail L900 580000117011 90235Rail L1500 580000117012 90136Guide Rail L1200 580000117013 32027

Rail L900

Guide Rail L1200

39

IK-54D

IK-54DRobust shape cutting machine

The IK-54 D is a high quality and robust shape cuttingmachine with high production accuracy. It allows to cutsteel plates of a material thickness up to 100 mm. Anextremely powerful permanent magnet guarantees aconstant feed even when cutting difficult shapes. Themagnet rolls (for sampling) have different diameter (8, 10,15 and 20 mm). By exchanging the magnet roll, variouscut sizes with the same template are achieved.The low weight (33 kg) allows an easy transport of themachine from one site of operation to another.These features apply only to considerably more expensivecutting machines.

n Cutting oxygen and feed are operated witheasy-to-use control unit

n Extreme powerful permanent magnetn S.C.R. control system for constant feedn Rotatable burner supportn Circle cutting (up to 1700 mm) possible

40


Cutting thickness 3-100 mmCutting circle 30-700 mm, with device 600-1700 mmCutting Rectangle 300-600 mm, with device 500-1200 mmCutting speed 100-1000 mm /minType of drive SCR controlPower supply 115 V ACType of gas Acetylene, propane, natural gas and mapp

gasMachine height 765 mmWeight 33,0 kg

Types

Description Art-No Alternative No.IK-54D, 115 V 580000118001 90051Please indicate type of gas with your order

Scope of delivery

Cutting machine IK-45 DCutting nozzles (5-30 mm material thickness)Connecting leadTool setOperation instructions

Accessories

Description Art-No Alternative No.Transformer 230 V /115 V 580000104014 90100Circle cutting unit 580000118010 30800Magnet roller, 6 mm 580000118011 30722Magnet roller, 8 mm 580000118012 30723Magnet roller, 15 mm 580000118013 30724Magnet roller, 20 mm 580000118014 30725

Circle cutting unit

Magnet roller, 6 mm

41

IK-05 Lug-Cut

IK-05 Lug-CutCutting machine for cutting liftingbrackets

The IK-05 Lug-Cut is a portable oxy-fuel cutting machinefor cutting lifting brackets. The machine is mainly usedeverywhere where large plate- and construction parts areequipped with lifting brackets for transportation (e.g.bridge and ship building).The feed results from a unique spring drive-the machinedoes not need any power supply. The curved cuttingnozzles allow a separating cut of the lifting brackets veryclose to the work piece without damaging it. The separatedlifting brackets can be reused. Varying materialthicknesses can be cut with the same feed speed simplyby changing the heating flames parameters..

n Unique spring driven Constant feed (400 mm /min)n Easy operation and low weight (5,9 kg)n Perfect quality of cuts (peerless to manual cutting)n Quick coupling device for burning gas,

heating and cutting oxygen

42


Cutting thickness 20-30 mmCutting speed 400 mm /minDrive system Spring driveDimensions Length of 740 mm, effective cutting length of

380 mmType of gas Acetylene, propaneWeight 5,9 kg

Types

Description Art-No Alternative No.IK-05 Lug-Cut 580000119000 61003848Please indicate type of gas with your order

Scope of delivery

Cutting machine IK-05 Lug-CutCutting nozzle (20-30 mm material thickness)Tool setOperation instructions

43

IK-12 Max 3W

IK-12 Max 3WCutting and welding at highestquality

The IK 12 Max 3W is the premium product of ourassortment! This motorized hand cutting machine allowsdifferent types of oxy-fuel /plasma cutting and automatedwelding.There are three major parts to the system.The advancedmotorized carriage, a cutting torch unit, the plate track andaccesories. All serving as independent units, the customercan choose the system for his specific requirements.The Speed Control utilizes an exclusive KOIKE DoubleCone Stepless Speed System, which functions with acondensor motor rotating at regular speed to prevent heatand voltage problems. In addition, the condensor motorrotates at a constant low speed ( 1,500 rpm ), extendingthe service life of bearings.

n Outstanding performancen Unrivaled robust and heat-proof machinen Excellent tractionn Steady drive by a well balanced centre of gravityn Very high number of operation hours (more than 5000 h)

due to the doubled cone driven High Speed (240-2400 mm /min.) n Heat protection shield on the cutting side and the base plate n Gas and plasma cutting as well as automated weldingn Easy maintenance

44


Cutting Speed (High speed) 240-2400 mm /minType of drive Double cone speed system, mechanical

regulationPower supply 115 V /230 V ACTotal length 430 mmTrack width 140 mmWeight 10,0 kg

Types

Description Art-No Alternative No.IK-12 MAX 3W, High Speed, 230 V 580000107003 90026IK-12 MAX 3W, High Speed, 115 V 580000107004 90057

Scope of delivery

Base machine IK-12 Max 3WConnecting leadOperation instructions

Accessories

Description Art-No Alternative No.Transformer 230 V /115 V 580000104014 90100Rail f. straight cutting (1800 mm) 580000106010 30400Magnet to fix rail 580000107010 D6010Circle rail 580000107012 30410Circle cutt. attachment 580000107013 30389Control unit FR-3, 230 V 580000107040 61003427Control unit FR-3, 110 V 580000107041 BUB01553Torch set MP-100 ( Welding /Plasma )

580000107043 31301

Weaving unit WU-2 580000107045 90219

Rail f. straight cutting (1800 mm)

Circle rail

Control unit FR-3, 230 V

Weaving unit WU-2

45

Wel-Handy-Multi

Wel-Handy-MultiAutomated welding portable

The Koike Wel Handy Multi welding carriage is available intwo basis models; standard and advance, with two mainoptions to cover a wide range of welding positions andapplications, such as horizontal, vertical, tack, weavingetc. The Wel Handy Multi Models are all light, compact andare equipped a 4WD. The magnetic force traction with lowcenter of gravity which achieves the highest pulling powerand stability in the market. In addition, vertical welding ispossible for both Wel Handy Multi Models.

Wel Handy Multi StandardThe Wel Handy Multi Standard can be used for flat andvertical welding. The Twin Torch option can easily be

mounted on the Wel Handy Multi Standard to increaseproductivity while decreasing heat distortion.

Wel Handy Multi AdvanceThe Wel Handy Multi Advance is equipped with true tackfunction for maximum productivity and weld quality. Withthe weaving option you can increase weldability andquality in multi-pass welding. The Weaving option is onlyavailable for the Wel Handy Multi Advance. The Twin Torchor the Weaving option can easily be mounted on the WelHandy Multi Advance.

46


Welding speed 150-1500 mm /min, left/right runType of drive 4 wheel drive with magnetic attraction

systemTraction power 50,0 kgBurner support Vertical stroke and horizontal, 45 mm

adjustableGuide roller Scanning height adjustable to 10, 20 and 38

mmAuto stop function End limit with electric arc interruptionPower supply 42 V ACMachine dimensions (WxHxD) 262 mm x 265 mm x 260 mmWeight 6,9 kg (Standard) /6,8 kg (Advance)

Types

Description Art-No Alternative No.Wel-Handy Multi, 42 V 580000130001 90214Wel-Handy Multi Advance, 42 V 580000130002 90215

Scope of delivery

Welding portable Wel-Handy MultiConnection cableTool setOperation manual

Accessories

Description Art-No Alternative No.Transformer 230 V /42 V 580000104013 222.002.207Twin torch option 580000130010 90216Weaving unit 580000130013 90217Holder f. curved torch 15-25 mm 580000130014 61000676

Twin torch option

Weaving unit

Holder f. curved torch 15-25 mm

47

SilverCut-250

SilverCut-250Hand cutting torch for gas mixingcutting nozzle

The SilverCut-250 is a hand cutting torch for gas mixingcutting nozzles. This well balanced and safe hand torchutilizes a triangular tube configuration for greater strength.The KOIKE gas mixing nozzles reduce flashbacks andprotect the cutting torch from damages. By changing thecutting nozzles, the gas type can be changed (acetylene,propane, mapp gas or natural gas).

n Gas mixing hand cutting torchn Rigid triangular tube configuration

48


Cutting range 3-250 mmTorch head 90°Total length 495 mmWeight (kg) 1,0 kgType of gas Acetylene, propane, natural gas and mapp

gas

Types

Description Art-No Alternative No.SilverCut-250 590000001000 80496

Scope of delivery

Hand cutting torchOperation instructions

Accessories

Description Art-No Alternative No.Dual rollers guide 590000003000 80515Circle cutting bar d=100-900 mm 590000003001 80514

49

MK-150

MK-150Medium Pressure/Tip mixing typegas cutting torch MK-150

The design of KOIKE'S MK-150 is rugged and simple. Thisalso result in a fine balance that makes it very easy to use.And in line with Koike's policy of even greater safety, athree seat tip-mixing system has been employed. This isbecause the three seat tip-mixing system substantiallyreduces the risk of flashbacks occurring. And even if

flashbacks occur, damage to the torch is reduced to theminimum. If you use KOIKE tips, you will have the benefitof an even greater safety margin, as KOIKE tips have aspecial design which makes it hard for any flashback tohappen.

50

Technical Specifications Cutting thickness 3-150 mmTorch head angle 90°Torch length 495 mmWeight 880gType of gas Acetylene, propane, natural gas and mapp

gas

Types

Description Art-No Alternative No.MK-150 590000001001 80497

Scope of delivery


Accessories


51

MK-250

MK-250Hand cutting torch for gas mixingcutting nozzles

The MK-250 is a hand cutting torch for gas mixing cuttingnozzles. This well balanced and safe hand torch utilizes atube configuration for greater strength. The KOIKE gasmixing nozzles reduce flash backs and protect the cuttingtorch from damages. By changing the cutting nozzles, thegas type can be changed (acetylene, propane, mapp gasor natural gas).

n Well-balanced and robustn Gas mixing hand cutting torchn Gas guiding stainless steel pipesn Torch head in 90° and 75°

52


Cutting range 3-250 mmTorch head 75°/90°Total length 525 mm (other lengths on request)Weight (kg) 1,5 kgType of gas Acetylene, propane, natural gas and mapp

gas

Types

Description Art-No Alternative No.Hand cutting torch MK250-90° 590000001002 80504Hand cutting torch MK250-75° 590000001003 80503

Scope of delivery


Accessories


53

MK-300

MK-300Robust hand cutting machine

The MK-300 is a hand cutting torch for gas mixing cuttingnozzles. This well balanced and safe hand torch utilizes atube configuration for greater strength. The KOIKE gasmixing nozzles reduce flash backs and protect the cuttingtorch from damages. By changing the cutting nozzles, thegas type can be changed (acetylene, propane, mapp gasor natural gas).

n Well-balanced and robustn Gas mixing hand cutting machinen Gas guiding pipes made of stainless steeln Torch head in 90° and 75°n Cutting capacity till 300 mm

54


Cutting range 3-300 mmTorch head 75°/90°Total length 661 mm ( other lengths on request )Weight (kg) 1,55 kgType of gas Acetylene, propane, natural gas and mapp

gas

Types

Description Art-No Alternative No.Hand cutting torch MK300-90° 590000001004 80508Hand cutting torch MK300-75° 590000001005 80507

Scope of delivery


Accessories


55

Cutting nozzles

Since its establishment in 1918, Koike has been committedto making full use of "gas energy” and by its dedicated effortshas become a voice of authority in machine tool circles and aprime mover in the advancement of this key industry. KOIKEis a supplier of integrated total systems, from gases to relatedequipment, meeting the many and varied needs of itscustomers. The gases and gas-related equipment divisionmanufactures and markets gases which are used in industry,medical treatment and daily life. Gas mixing cutting nozzlesby KOIKE have an excellent reputation worldwide.

The cutting nozzles can be applied with different cutting gases(acetylen, propan, mapp and natuaral gas) allowing to operatecutting machines and cutting equipment with different cuttinggases.

n Straight and clean cut surfacen Small kerfn No slaggingn No partial melting of edgesn High cutting speedn High operating safetyn High service lifen Low gas consumption

57

Cutting nozzle 102 HC

Gas mixing cutting nozzle Acetylene

Des.Article

no.Alternative

No.Cuttingrange Cutting speed Pressure (bar) Consumption (m3/h)

Kerfwidth

mm mm/min.Cutting

O2

HeatingO2 Acetylene

CuttingO2

HeatingO2 Acetylene mm

00 590000005000 80011 0-5 660 1,5 1,5 0,2 0,69 0,41 0,37 10 590000005001 80012 5-10 660-550 2 2 0,2 1,2 0,41 0,37 1,3-1,51 590000005002 80013 10-15 550-490 2,5 2,5 0,2 2,1 0,48 0,43 1,7-1,82 590000005003 80014 15-30 490-400 3 3 0,2 3,4 0,48 0,43 2,0-2,13 590000005004 80015 30-40 400-350 3 3 0,2 4,3 0,48 0,43 2,3-2,44 590000005005 80016 40-50 350-320 3,5 3,5 0,25 6,5 0,55 0,5 2,7-2,95 590000005006 80017 50-100 320-200 4 4 0,3 11 0,69 0,63 3,4-3,56 590000005007 80018 100-150 200-150 4 4 0,35 15 0,77 0,7 3,9-4,07 590000005008 80019 150-250 150-80 4,5 4,5 0,4 22 1,06 0,96 4,4-5,18 590000005009 80051 250-300 80-45 4,5 4,5 0,4 28 1,06 0,96 5,8-6,8


Gas mixing cutting nozzle Propane

Des.Article

no.Alternative

No.Cuttingrange

Cuttingspeed Pressure (bar)

Consumption(m3/h)

Kerfwidth

mm mm/min.Cutting

O2

HeatingO2 Propane

CuttingO2

HeatingO2 Propanemm

00 59000000501080041 0-5 660 1,5 1,5 0,2 0,69 1,180,31 1,20 59000000501180042 5-10 660-550 2 2 0,2 1,2 1,180,311,3-1,51 59000000501280043 10-15 550-490 2,5 2,5 0,2 2,1 1,180,311,7-1,82 59000000501380044 15-30 490-400 3 3 0,25 3,4 1,370,362,0-2,13 59000000501480045 30-40 400-350 3 3 0,25 4,3 1,370,362,3-2,44 59000000501580046 40-50 350-320 3,5 3,5 0,3 6,5 1,860,492,7-2,95 59000000501680047 50-100 320-200 4 4 0,3 11 1,860,493,4-3,56 59000000501780048 100-150 200-150 4 4 0,3 15 3,040,8 3,9-4,07 59000000501880049 150-250 150-80 4,5 4,5 0,4 22 3,720,984,4-5,18 59000000501980050 250-300 80-45 4,5 4,5 0,4 28 3,720,985,8-6,8


Gas mixing cutting nozzle Propane

Des.Article

no.Alternative


Kerfwidth

mm mm/min.Cutting

O2

HeatingO2 Propane

CuttingO2

HeatingO2 Propane mm

00 590000005010 80041 0-5 660 1,5 1,5 0,2 0,69 1,18 0,31 1,20 590000005011 80042 5-10 660-550 2 2 0,2 1,2 1,18 0,31 1,3-1,51 590000005012 80043 10-15 550-490 2,5 2,5 0,2 2,1 1,18 0,31 1,7-1,82 590000005013 80044 15-30 490-400 3 3 0,25 3,4 1,37 0,36 2,0-2,13 590000005014 80045 30-40 400-350 3 3 0,25 4,3 1,37 0,36 2,3-2,44 590000005015 80046 40-50 350-320 3,5 3,5 0,3 6,5 1,86 0,49 2,7-2,95 590000005016 80047 50-100 320-200 4 4 0,3 11 1,86 0,49 3,4-3,56 590000005017 80048 100-150 200-150 4 4 0,3 15 3,04 0,8 3,9-4,07 590000005018 80049 150-250 150-80 4,5 4,5 0,4 22 3,72 0,98 4,4-5,18 590000005019 80050 250-300 80-45 4,5 4,5 0,4 28 3,72 0,98 5,8-6,8


Gas mixing cutting nozzle Natural gas

Des.Article

no.Alternative

No.Cuttingrange


Consumption(m3/h)

Kerfwidth

mm mm/min.Cutting

O2

HeatingO2

Naturalgas

CuttingO2

HeatingO2

Naturalgas mm

00 59000000503080061 0-5 660 1,5 1,5 0,15 0,69 1,220,74 10 59000000503180062 5-10 660-550 2 2 0,15 1,2 1,220,741,3-1,51 59000000503280063 10-15 550-490 2,5 2,5 0,15 2,1 1,220,741,7-1,82 59000000503380064 15-30 490-400 3 3 0,15 3,4 1,390,842,0-2,13 59000000503480065 30-40 400-350 3 3 0,15 4,3 1,390,842,3-2,44 59000000503580066 40-50 350-320 3,5 3,5 0,15 6,5 1,9 1,152,7-2,95 59000000503680067 50-100 320-200 4 4 0,15 11 1,9 1,153,4-3,56 59000000503780068 100-150 200-150 4 4 0,15 15 2,311,4 3,9-4,07 59000000503880069 150-250 150-80 4,5 4,5 0,15 22 2,311,4 4,4-5,18 59000000503980070 250-300 80-45 4,5 4,5 0,15 28 2,311,4 5,8-6,8

58


Gas mixing cutting nozzle Natural gas

Des.Article

no.Alternative


Kerfwidth

mm mm/min.Cutting

O2

HeatingO2

Naturalgas

CuttingO2

HeatingO2

Naturalgas mm

00 590000005030 80061 0-5 660 1,5 1,5 0,15 0,69 1,22 0,74 10 590000005031 80062 5-10 660-550 2 2 0,15 1,2 1,22 0,74 1,3-1,51 590000005032 80063 10-15 550-490 2,5 2,5 0,15 2,1 1,22 0,74 1,7-1,82 590000005033 80064 15-30 490-400 3 3 0,15 3,4 1,39 0,84 2,0-2,13 590000005034 80065 30-40 400-350 3 3 0,15 4,3 1,39 0,84 2,3-2,44 590000005035 80066 40-50 350-320 3,5 3,5 0,15 6,5 1,9 1,15 2,7-2,95 590000005036 80067 50-100 320-200 4 4 0,15 11 1,9 1,15 3,4-3,56 590000005037 80068 100-150 200-150 4 4 0,15 15 2,31 1,4 3,9-4,07 590000005038 80069 150-250 150-80 4,5 4,5 0,15 22 2,31 1,4 4,4-5,18 590000005039 80070 250-300 80-45 4,5 4,5 0,15 28 2,31 1,4 5,8-6,8

Cutting nozzle 402 ST

Standard cutting nozzle for IK-82 Series Acetylene

Des.Article

no.Alternative

No.Cuttingrange


Consumption(m3/h)

Kerfwidth

mm mm/min.Cutting

O2

HeatingO2 Acetylene

CuttingO2

HeatingO2 Acetylenemm

0 59000000504080082 5-10 500-450 2 2 0,15 1,2 0,380,34 1,51 59000000504180083 10-15 450-400 2,5 2,5 0,15 2,1 0,4850,44 1,82 59000000504280084 15-30 400-350 3 3 0,15 3,4 0,480,44 2,13 59000000504380085 30-40 350-300 3 3 0,15 4,3 0,550,5 2,44 59000000504480086 40-50 300-250 3,5 3,5 0,15 6,5 0,640,58 2,95 59000000504580087 50-100 250-200 4 4 0,15 11 0,730,66 3,5

Cutting nozzle 402 ST

Standard cutting nozzle for IK-82 Series Acetylene

Des.Article

no.Alternative


Kerfwidth

mm mm/min.Cutting

O2

HeatingO2 Acetylene

CuttingO2


0 590000005040 80082 5-10 500-450 2 2 0,15 1,2 0,38 0,34 1,51 590000005041 80083 10-15 450-400 2,5 2,5 0,15 2,1 0,485 0,44 1,82 590000005042 80084 15-30 400-350 3 3 0,15 3,4 0,48 0,44 2,13 590000005043 80085 30-40 350-300 3 3 0,15 4,3 0,55 0,5 2,44 590000005044 80086 40-50 300-250 3,5 3,5 0,15 6,5 0,64 0,58 2,95 590000005045 80087 50-100 250-200 4 4 0,15 11 0,73 0,66 3,5

Cutting nozzle 406 NT

Standard cutting nozzle for IK-82 Series Propane

Des.Article

no.Alternative

No.Cuttingrange


Consumption(m3/h)

Kerfwidth

mm mm/min.Cutting

O2

HeatingO2 Propane

CuttingO2

HeatingO2 Propanemm

0 59000000505080102 5-10 500-450 2 2 0,15 1,2 1,640,41 1,51 59000000505180103 10-15 450-400 2,5 2,5 0,15 2,1 1,640,41 1,82 59000000505280104 15-30 400-350 3 3 0,15 3,4 1,640,41 2,13 59000000505380105 30-40 350-300 3 3 0,15 4,3 1,640,41 2,44 59000000505480106 40-50 300-250 3,5 3,5 0,15 6,5 2,160,54 2,95 59000000505580107 50-100 250-200 4 4 0,15 11 2,160,54 3,5

59

Cutting nozzle 406 NT

Standard cutting nozzle for IK-82 Series Propane

Des.Article

no.Alternative


Kerfwidth

mm mm/min.Cutting

O2

HeatingO2 Propane

CuttingO2


0 590000005050 80102 5-10 500-450 2 2 0,15 1,2 1,64 0,41 1,51 590000005051 80103 10-15 450-400 2,5 2,5 0,15 2,1 1,64 0,41 1,82 590000005052 80104 15-30 400-350 3 3 0,15 3,4 1,64 0,41 2,13 590000005053 80105 30-40 350-300 3 3 0,15 4,3 1,64 0,41 2,44 590000005054 80106 40-50 300-250 3,5 3,5 0,15 6,5 2,16 0,54 2,95 590000005055 80107 50-100 250-200 4 4 0,15 11 2,16 0,54 3,5

Cutting nozzle 102 Lug-Cut

Gas mixing cutting nozzle for IK-05 Lug-Cut Acetylene

Des.Article

no.Alternative

No.Cuttingrange


Consumption(m3/h)

Kerfwidth

mm mm/min.Cutting

O2

HeatingO2 Acetylene

CuttingO2


3 590000005070DB91101F30-40 400 3 3 0,2 4,3 0,480,43 2,4


Gas mixing cutting nozzle for IK-05 Lug-Cut Acetylene

Des.Article

no.Alternative


Kerfwidth

mm mm/min.Cutting

O2

HeatingO2 Acetylene

CuttingO2


3 590000005070 DB91101F 30-40 400 3 3 0,2 4,3 0,48 0,43 2,4


Gas mixing cutting nozzle for IK-05 Lug-Cut Propane

Des.Article

no.Alternative

No.Cuttingrange


Consumption(m3/h)

Kerfwidth

mm mm/min.Cutting

O2

HeatingO2 Propane

CuttingO2

HeatingO2 Propanemm

3 590000005080DB91401F30-40 400 3 3 0,25 4,3 1,370,36 2,4

60


Gas mixing cutting nozzle for IK-05 Lug-Cut Propane

Des.Article

no.Alternative


Kerfwidth

mm mm/min.Cutting

O2

HeatingO2 Propane

CuttingO2


3 590000005080 DB91401F 30-40 400 3 3 0,25 4,3 1,37 0,36 2,4

Cutting nozzle 102 D5

Gas mixing machine cutting nozzle Acetylene

Des.Article

no.Alternative

No.Cuttingrange

Cuttingspeed Pressure bar

Consumption(m3/h)

Kerfwidth

mm mm/min.Cutting

O2

HeatingO2 Acetylene

CuttingO2


00 59000000509080201 0-5 700 5 1,5 0,2 0,85 0,520,47 1,10 59000000509180202 5-10 700-625 5 2 0,2 1,6 0,520,471,2-1,41 59000000509280203 10-15 625-550 5 2,5 0,2 2,4 0,6 0,551,6-1,72 59000000509380204 15-30 550-475 5 3 0,2 3,6 0,6 0,551,9-2,03 59000000509480205 30-40 475-425 5 3 0,2 4,8 0,6 0,552,2-2,44 59000000509580206 40-50 425-350 5 3 0,2 5,6 0,750,682,5-2,75 59000000509680207 50-100 350-250 5 4 0,25 8,8 0,860,783,0-3,36 59000000509780208 100-150 250-175 5 4 0,3 13,5 0,950,863,6-4,27 59000000509880209 150-250 175-90 5 4,5 0,4 24 1,331,214,7-5,48 59000000509980210 250-300 90-60 5 4,5 0,4 31 1,6 1,455,5-6,4

61



Des.Article

no.Alternative

No.Cuttingrange Cutting speed Pressure bar Consumption (m3/h)

Kerfwidth

mm mm/min.Cutting

O2

HeatingO2 Acetylene

CuttingO2


00 590000005090 80201 0-5 700 5 1,5 0,2 0,85 0,52 0,47 1,10 590000005091 80202 5-10 700-625 5 2 0,2 1,6 0,52 0,47 1,2-1,41 590000005092 80203 10-15 625-550 5 2,5 0,2 2,4 0,6 0,55 1,6-1,72 590000005093 80204 15-30 550-475 5 3 0,2 3,6 0,6 0,55 1,9-2,03 590000005094 80205 30-40 475-425 5 3 0,2 4,8 0,6 0,55 2,2-2,44 590000005095 80206 40-50 425-350 5 3 0,2 5,6 0,75 0,68 2,5-2,75 590000005096 80207 50-100 350-250 5 4 0,25 8,8 0,86 0,78 3,0-3,36 590000005097 80208 100-150 250-175 5 4 0,3 13,5 0,95 0,86 3,6-4,27 590000005098 80209 150-250 175-90 5 4,5 0,4 24 1,33 1,21 4,7-5,48 590000005099 80210 250-300 90-60 5 4,5 0,4 31 1,6 1,45 5,5-6,4



Des.Article

no.Alternative

No.Cuttingrange


Consumption(m3/h)

Kerfwidth

mm mm/min.Cutting

O2

HeatingO2 Acetylene

CuttingO2


00 59000000510080221 0-5 750 7 1,5 0,2 0,75 0,520,47 0,90 59000000510180222 5-10 750-680 7 2 0,2 1,1 0,520,471,0-1,21 59000000510280223 10-15 680-600 7 2,8 0,2 2,5 0,6 0,551,3-1,42 59000000510380224 15-30 600-500 7 3 0,2 3,8 0,6 0,551,5-1,83 59000000510480225 30-40 500-450 7 3 0,2 5,4 0,6 0,552,0-2,24 59000000510580226 40-50 450-400 7 3 0,2 7,3 0,750,682,3-2,65 59000000510680227 50-100 400-260 7 4 0,25 10 0,860,782,8-3,36 59000000510780228 100-150 260-180 7 4 0,3 14 0,950,863,4-3,77 59000000510880229 150-250 180-100 7 4,5 0,3 22 1,331,214,0-4,98 59000000510980230 250-300 100-70 7 4,5 0,4 35 1,6 1,455,0-6,2



Des.Article

no.Alternative


Kerfwidth

mm mm/min.Cutting

O2

HeatingO2 Acetylene

CuttingO2


00 590000005100 80221 0-5 750 7 1,5 0,2 0,75 0,52 0,47 0,90 590000005101 80222 5-10 750-680 7 2 0,2 1,1 0,52 0,47 1,0-1,21 590000005102 80223 10-15 680-600 7 2,8 0,2 2,5 0,6 0,55 1,3-1,42 590000005103 80224 15-30 600-500 7 3 0,2 3,8 0,6 0,55 1,5-1,83 590000005104 80225 30-40 500-450 7 3 0,2 5,4 0,6 0,55 2,0-2,24 590000005105 80226 40-50 450-400 7 3 0,2 7,3 0,75 0,68 2,3-2,65 590000005106 80227 50-100 400-260 7 4 0,25 10 0,86 0,78 2,8-3,36 590000005107 80228 100-150 260-180 7 4 0,3 14 0,95 0,86 3,4-3,77 590000005108 80229 150-250 180-100 7 4,5 0,3 22 1,33 1,21 4,0-4,98 590000005109 80230 250-300 100-70 7 4,5 0,4 35 1,6 1,45 5,0-6,2


Gas mixing machine cutting nozzle Ethylene

Des.Article

no.Alternative

No.Cuttingrange


Consumption(m3/h)

Kerfwidth

mm mm/min.Cutting

O2

HeatingO2 Ethylene

CuttingO2

HeatingO2 Ethylenemm

00 59000000511080179 0-5 750 7 1,5 0,2 0,75 0,8 0,46 0,90 59000000511180180 5-10 750-680 7 2 0,2 1,1 0,8 0,461,0-1,21 59000000511280181 10-15 680-600 7 2,8 0,2 2,5 0,8 0,461,3-1,42 59000000511380182 15-30 600-500 7 3 0,25 3,8 0,9 0,5 1,5-1,83 59000000511480183 30-40 500-450 7 3 0,25 5,4 0,9 0,5 2,0-2,24 59000000511580184 40-50 450-400 7 3 0,35 7,3 1,2 0,662,3-2,65 59000000511680185 50-100 400-260 7 4 0,35 10 1,2 0,662,8-3,36 59000000511780186 100-150 260-180 7 4 0,35 14 2,2 1,283,4-3,77 59000000511880187 150-250 180-100 7 4,5 0,35 22 2,2 1,284,0-4,98 59000000511980188 250-300 100-70 7 4,5 0,35 35 2,2 1,285,0-6,2

62


Gas mixing machine cutting nozzle Ethylene

Des.Article

no.Alternative


Kerfwidth

mm mm/min.Cutting

O2

HeatingO2 Ethylene

CuttingO2

HeatingO2 Ethylene mm

00 590000005110 80179 0-5 750 7 1,5 0,2 0,75 0,8 0,46 0,90 590000005111 80180 5-10 750-680 7 2 0,2 1,1 0,8 0,46 1,0-1,21 590000005112 80181 10-15 680-600 7 2,8 0,2 2,5 0,8 0,46 1,3-1,42 590000005113 80182 15-30 600-500 7 3 0,25 3,8 0,9 0,5 1,5-1,83 590000005114 80183 30-40 500-450 7 3 0,25 5,4 0,9 0,5 2,0-2,24 590000005115 80184 40-50 450-400 7 3 0,35 7,3 1,2 0,66 2,3-2,65 590000005116 80185 50-100 400-260 7 4 0,35 10 1,2 0,66 2,8-3,36 590000005117 80186 100-150 260-180 7 4 0,35 14 2,2 1,28 3,4-3,77 590000005118 80187 150-250 180-100 7 4,5 0,35 22 2,2 1,28 4,0-4,98 590000005119 80188 250-300 100-70 7 4,5 0,35 35 2,2 1,28 5,0-6,2


Gas mixing machine cutting nozzle Propane

Des.Article

no.Alternative

No.Cuttingrange


Consumption(m3/h)

Kerfwidth

mm mm/min.Cutting

O2

HeatingO2 Propane

CuttingO2

HeatingO2 Propanemm

00 59000000512080191 0-5 700 5 1,5 0,2 0,85 1,180,31 1,10 59000000512180192 5-10 700-625 5 2 0,2 1,6 1,180,311,2-1,41 59000000512280193 10-15 625-550 5 2,8 0,2 2,4 1,180,311,6-1,72 59000000512380194 15-30 550-475 5 3 0,25 3,6 1,370,361,9-2,03 59000000512480195 30-40 475-425 5 3 0,25 4,8 1,370,362,2-2,44 59000000512580196 40-50 425-350 5 3 0,3 5,6 1,860,492,5-2,75 59000000512680197 50-100 350-250 5 4 0,3 8,8 1,860,493,0-3,36 59000000512780198 100-150 250-175 5 4 0,3 13,5 3,040,8 3,6-4,27 59000000512880199 150-250 175-90 5 4,5 0,4 24 3,720,984,7-5,48 59000000512980200 250-300 90-60 5 4,5 0,4 31 3,720,985,5-6,4



Des.Article

no.Alternative


Kerfwidth

mm mm/min.Cutting

O2

HeatingO2 Propane

CuttingO2


00 590000005120 80191 0-5 700 5 1,5 0,2 0,85 1,18 0,31 1,10 590000005121 80192 5-10 700-625 5 2 0,2 1,6 1,18 0,31 1,2-1,41 590000005122 80193 10-15 625-550 5 2,8 0,2 2,4 1,18 0,31 1,6-1,72 590000005123 80194 15-30 550-475 5 3 0,25 3,6 1,37 0,36 1,9-2,03 590000005124 80195 30-40 475-425 5 3 0,25 4,8 1,37 0,36 2,2-2,44 590000005125 80196 40-50 425-350 5 3 0,3 5,6 1,86 0,49 2,5-2,75 590000005126 80197 50-100 350-250 5 4 0,3 8,8 1,86 0,49 3,0-3,36 590000005127 80198 100-150 250-175 5 4 0,3 13,5 3,04 0,8 3,6-4,27 590000005128 80199 150-250 175-90 5 4,5 0,4 24 3,72 0,98 4,7-5,48 590000005129 80200 250-300 90-60 5 4,5 0,4 31 3,72 0,98 5,5-6,4



Des.Article

no.Alternative

No.Cuttingrange


Consumption(m3/h)

Kerfwidth

mm mm/min.Cutting

O2

HeatingO2 Propane

CuttingO2

HeatingO2 Propanemm

00 59000000513080241 0-5 750 7 1,5 0,2 0,75 1,180,31 0,90 59000000513180242 5-10 750-680 7 2 0,2 1,1 1,180,311,0-1,21 59000000513280243 10-15 680-600 7 2,5 0,2 2,5 1,180,311,3-1,42 59000000513380244 15-30 600-500 7 3 0,25 3,8 1,370,361,5-1,83 59000000513480245 30-40 500-450 7 3 0,25 5,4 1,370,362,0-2,24 59000000513580246 40-50 450-400 7 3,5 0,25 7,3 1,860,492,3-2,65 59000000513680247 50-100 400-260 7 4 0,3 10 1,860,492,8-3,36 59000000513780248 100-150 260-180 7 4 0,3 14 3,040,8 3,4-3,77 59000000513880249 150-250 180-100 7 4,5 0,4 22 3,720,984,0-4,98 59000000513980250 250-300 100-70 7 4,5 0,4 35 3,720,985,0-6,2

63



Des.Article

no.Alternative


Kerfwidth

mm mm/min.Cutting

O2

HeatingO2 Propane

CuttingO2


00 590000005130 80241 0-5 750 7 1,5 0,2 0,75 1,18 0,31 0,90 590000005131 80242 5-10 750-680 7 2 0,2 1,1 1,18 0,31 1,0-1,21 590000005132 80243 10-15 680-600 7 2,5 0,2 2,5 1,18 0,31 1,3-1,42 590000005133 80244 15-30 600-500 7 3 0,25 3,8 1,37 0,36 1,5-1,83 590000005134 80245 30-40 500-450 7 3 0,25 5,4 1,37 0,36 2,0-2,24 590000005135 80246 40-50 450-400 7 3,5 0,25 7,3 1,86 0,49 2,3-2,65 590000005136 80247 50-100 400-260 7 4 0,3 10 1,86 0,49 2,8-3,36 590000005137 80248 100-150 260-180 7 4 0,3 14 3,04 0,8 3,4-3,77 590000005138 80249 150-250 180-100 7 4,5 0,4 22 3,72 0,98 4,0-4,98 590000005139 80250 250-300 100-70 7 4,5 0,4 35 3,72 0,98 5,0-6,2


Gas mixing machine cutting nozzle Natural gas

Des.Article

no.Alternative

No.Cuttingrange


Consumption(m3/h)

Kerfwidth

mm mm/min.Cutting

O2

HeatingO2

Naturalgas

CuttingO2

HeatingO2

Naturalgas mm

00 59000000517080281 0-5 750 7 1,5 0,15 0,75 1,220,74 0,90 59000000517180282 5-10 750-680 7 2 0,15 1,1 1,220,741,0-1,21 59000000517280283 10-15 680-600 7 2,5 0,15 2,5 1,220,741,3-1,42 59000000517380284 15-30 600-500 7 3 0,15 3,8 1,390,841,5-1,83 59000000517480285 30-40 500-450 7 3 0,15 5,4 1,390,842,0-2,24 59000000517580286 40-50 450-400 7 3,5 0,15 7,3 1,391,152,3-2,65 59000000517680287 50-100 400-260 7 4 0,15 10 1,9 1,152,8-3,36 59000000517780288 100-150 260-180 7 4 0,15 14 1,9 1,4 3,4-3,77 59000000517880289 150-250 180-100 7 4,5 0,15 22 2,311,4 4,0-4,98 59000000517980290 250-300 100-70 7 4,5 0,15 35 2,311,4 5,0-6,2


Gas mixing machine cutting nozzle Natural gas

Des.Article

no.Alternative


Kerfwidth

mm mm/min.Cutting

O2

HeatingO2

Naturalgas

CuttingO2

HeatingO2

Naturalgas mm

00 590000005170 80281 0-5 750 7 1,5 0,15 0,75 1,22 0,74 0,90 590000005171 80282 5-10 750-680 7 2 0,15 1,1 1,22 0,74 1,0-1,21 590000005172 80283 10-15 680-600 7 2,5 0,15 2,5 1,22 0,74 1,3-1,42 590000005173 80284 15-30 600-500 7 3 0,15 3,8 1,39 0,84 1,5-1,83 590000005174 80285 30-40 500-450 7 3 0,15 5,4 1,39 0,84 2,0-2,24 590000005175 80286 40-50 450-400 7 3,5 0,15 7,3 1,39 1,15 2,3-2,65 590000005176 80287 50-100 400-260 7 4 0,15 10 1,9 1,15 2,8-3,36 590000005177 80288 100-150 260-180 7 4 0,15 14 1,9 1,4 3,4-3,77 590000005178 80289 150-250 180-100 7 4,5 0,15 22 2,31 1,4 4,0-4,98 590000005179 80290 250-300 100-70 7 4,5 0,15 35 2,31 1,4 5,0-6,2

64

Notes

65

Notes

66

Notes

67

KOIKE – the spirit of cutting.

Advanced technology combined with face to face relationship and an in-depth

understanding of customers cutting needs – that’s what KOIKE as a Japanese manufacturer

of oxy-fuel, plasma and laser cutting technology stands for.

Customers are companies active in shipbuilding, steel construction, vehicle manufacturing, fabrication

and other heavy metal industries – they all trust on more than 90 years of KOIKE’s cutting expertise.

KOIKE Europe B.V.Grote Tocht 19 • 1507 CG Zaandam (NL)Phone +31 756127227Fax +31 756702271Web www.koike.nlE-Mail [email protected]

KOIKE Engineering GermanyPappelweg 8 • 61169 FriedbergPhone +49 6031 161571-00Fax +49 6031 161571-01Web www.koike-engineering.comE-Mail [email protected]

Tech

nica

l cha

nges

as

wel

l as

erro

rs a

nd p

rintin

g m

ista

kes

are

rese

rved

. 28/

07/2

011

Documents

Portable Cat Keke Gen Rg b