4'-5 1 2 " 2'-10" 3'-11 1 2 " 5'-0" 40"x50" SLIDING GLASS SERVICE WINDOW W/SOLID SURFACE COUNTER 8'-6" 42" STEEL FRAME MAN DOOR 32" STEEL FRAME MAN DOOR 36" STEEL FRAME MAN DOOR W/WINDOW 3'-8" 10'-5" 11'-5" 19'-7 1 4 " SECTION B-B INTERIOR VIEW LOOKING SOUTH SCALE: 3 8 "=1'-0" PAINT WALLS: DOVETAIL SW7018 TRIM & DOORS DARKROOM SW7083 BY SHERWIN-WILLIAMS OR EQUAL PROPRIETARY INFORMATION THIS INFORMATION IS PROPRIETARY TO GLOBE METALLURGICAL DISCLOSURE, REPRODUCTION OR USE OF THIS INFORMATION WITHOUT WRITTEN AUTHORIZATION FROM GLOBE METALLURGICAL IS FORBIDDEN METALLURGICAL, INC. NIAGARA FALLS, NY 14305 HEAT TREATED THIRD ANGLE PROJECTION ITEM NO QTY REQD NEXT ASSEMBLY DRAWING NO UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCES FRACTIONS 1 32 " DECIMALS ANGLE BREAK ALL SHARP EDGES .003 TO .010 MACHINE FINISH ALL MACHINED SURFACES TO BE 125 OR BETTER DO NOT SCALE PRINT PROJECT NUMBER DRAWN CHECKED ENGINEER STRESS PROJECT ENGINEER SIZE D DATE DRAWING NUMBER REV SCALE WEIGHT SHEET REVISION NUMBER: REVISION DESCRIPTION: DATE: M.WILLIAMS 12.24.2014 SC-8135-D 0 AS NOTED 2 OF 3 MAIN GATE GUARDHOUSE RENOVATION & RECONSTRUCTION FIXTURE SPECIFICATION GUIDELINE ADA TOILET SPECIFICATION (GUIDELINE ONLY) LAB SINK SPECIFICATION (GUIDELINE ONLY) SLOP SINK SPECIFICATION (GUIDELINE ONLY) ADA SINK SPECIFICATION (GUIDELINE ONLY) HW TANK SPECIFICATION (GUIDELINE ONLY) ATTIC ACCESS LADDER (GUIDELINE ONLY) THIS WILL BE FOR ACCESS TO THE HVAC UNIT LOCATED IN THE GABLE SECTION 0 ISSUED FOR REVIEW 12.29.14

SC-8135-D-Guard House Details

Download PDF Report

Upload
mark-williams
View
25
Download
0

Embed Size (px)

Citation preview

4'-5

1 2"

2'-1

3'-1112"

5'-0"40"x50" SLIDINGGLASS SERVICE

WINDOW W/SOLIDSURFACE COUNTER

8'-6

42" STEELFRAMEMAN DOOR

32" STEELFRAMEMAN DOOR

36" STEELFRAMEMAN DOORW/WINDOW

3'-8"

10'-5"

11'-5"

19'-714"

SECTION B-B INTERIOR VIEWLOOKING SOUTH

SCALE: 38"=1'-0"

PAINTWALLS: DOVETAILSW7018TRIM & DOORSDARKROOM SW7083BY SHERWIN-WILLIAMSOR EQUAL

PROPRIETARY INFORMATION

THIS INFORMATION ISPROPRIETARY TO

GLOBE METALLURGICALDISCLOSURE, REPRODUCTIONOR USE OF THIS INFORMATION

WITHOUT WRITTENAUTHORIZATION FROM

GLOBE METALLURGICALIS FORBIDDEN

METALLURGICAL, INC.NIAGARA FALLS, NY 14305

HEAT TREATED

THIRD ANGLE PROJECTION

ITEMNO

QTYREQD

NEXT ASSEMBLYDRAWING NO

UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN INCHES

TOLERANCESFRACTIONS ± 1

32"DECIMALS 0.00 ±.01

0.000±.005ANGLE ±0.5°

BREAK ALL SHARP EDGES.003 TO .010

MACHINE FINISHALL MACHINED SURFACES TO

BE 125 OR BETTER

DO NOT SCALE PRINT

PROJECT NUMBER

DRAWN

CHECKED

ENGINEER

STRESS

PROJECT ENGINEER

SIZE

DDATE DRAWING NUMBER REV

SCALE WEIGHT SHEETREVISION NUMBER: REVISION DESCRIPTION: DATE:

M.WILLIAMS

12.24.2014 SC-8135-D 0

AS NOTED 2 OF 3

MAIN GATE GUARDHOUSERENOVATION & RECONSTRUCTIONFIXTURE SPECIFICATION GUIDELINE

ADA TOILET SPECIFICATION (GUIDELINE ONLY) LAB SINK SPECIFICATION (GUIDELINE ONLY) SLOP SINK SPECIFICATION (GUIDELINE ONLY) ADA SINK SPECIFICATION (GUIDELINE ONLY)

HW TANK SPECIFICATION (GUIDELINE ONLY)

ATTIC ACCESS LADDER (GUIDELINE ONLY)THIS WILL BE FOR ACCESS TO THE HVAC UNIT LOCATED IN THE GABLE SECTION

0 ISSUED FOR REVIEW 12.29.14