Cast Iron End Suction Motor Pumps (to EN733) GSD

* All specifications are subject to change without prior notice.* Dimensional details are provided for reference only.

EBARA Pumps Malaysia Sdn Bhd6, Jalan TP3, UEP Subang Jaya Industrial Park,47620 Subang Jaya, Selangor, Malaysia.Tel : 03-8023 6622 Fax : 03-8023 9355Email : sales@ebara.com.my Website : www.ebara.com.my

EPM GD 0719

Authorised dealer:

PUMP

FEATURES

APPLICATIONS

Cast Iron End Suction Motor Pumps(to EN733) Type GSD

• Water supply & pressure bossting• Building services & cooling towers• Industrial• Irrigation, etc.

RANGE

• 37 pump end sizes• Nominal impeller sizes from 125 to 400mm• 1.5 to 110 kW 2 pole motors• 1.1 to 75 kW 4 pole motors• Discharge sizes from 32mm to 150mm• Flows to 800m3/h; Heads to 150m

A versatile high quality compact close coupled motor pump suitable or many applications where water needs to be transferred or boosted.

• Pump dimensions to EN733• High efficiency hydraulic design (MEI > 0.6 all models)• Cast Iron/Bronze/Stanless steel construction• Compact close coupled design.• SiC/C/EPDM Burgmann seal• Front & rear bronze wear rings• 16 bar casings [to ISO5199] (24 bar hydrostatic test pressure)

• Precision 2 piece stub shaft & hub design• Quality high efficiency WEG motors

CONFIGURATIONS

Pumpsets with motors over 90 frame* are fitted with spacers for ease of installation and maintenance. There are various types and combinations of spacers depending on the model. The motors are bolted to the motor spacers, so that the complete rotating element with motor and spacers is a single rigid assembly that can be “slid” back for ease of maintenance and reassembly.

3A161

Motor spacers

3B

(Solid bar/paint)

3C

4A

162

Front view(Cast iron/paint)

5A162

Front view

Pump spacers(Cast iron/paint)

Motor spacers&

161

5B

Front view

(Solid bar/paint)

1A095

Stay

2A

No spacers

6A

Motor spacer(Folded base)

161

6B

(Folded base/Zn)

GSD4 40-315/4.0 kW* plus

GSD4 100-160/2.2 kWGSD4 100-160/3.0 kWGSD4 100-200/3.0 kW

Applies to 90 frame motors*

095Item

162

161

StayDescription

Folded steelMaterial

PaintFinish

1Qty.

1AApplies to

4A,5A,5B

3B,5B3A,5A

3C6A6B

2,4,6

22211

Pump spacer Cast iron Paint

Motor spacer Folded steel

Steel bar Paint

Paint

Channel (down)Channel (side)BaseplateBaseplate

Rectangular-

-

Style

Zn plated

Zn plated

Zn plated

Specifications: Stays, Motor spacers, Pump spacers

161

162161

161

161

Pump spacers

(Folded Channel/Zn)

(Folded Channel/Zn)

(Folded Channel/Zn)

(Folded base/paint)

GSD4 40-315/4.0 kW* following models use a stay instead of motor spacers

GSD4 100-160/2.2 kWGSD4 100-160/3.0 kWGSD4 100-200/3.0 kW

All models with 90 frame motors (and the 4 models above) have a single stay as

shown on the drawing.Stay

Cast Iron End Suction Motor Pumps (to EN733) Cast Iron End Suction Motor Pumps (to EN733) GSDGSD

PERFORMANCE CHART

SPECIFICATIONS

0.2 0.3 0.4 0.6 0.8 1 2 3 4 6 10

3

456

10

15

20

30

40

60

m³/min

32-200

32-250

50-125

65-125

40-160 50-160 65-160 80-160

100-160

40-200 50-20065-200 80-200

100-200125-200

150-200

40-25050-250 65-250 80-250 100-250

125-250150-250

40-31550-315

65-31580-315

100-315

125-315

150-315

80-400100-400

125-400150-400

1.5

1.5

1.5

1.5

1.5

1.51.5

2.2

2.2

2.2

2.22.2

2.2

2.2

2.2

3

3

3

3

3

3

4

4 4

4

4

4

5.5

5.5

5.5

5.5

5.5

5.5

7.57.5

7.5

7.5

7.5

7.5

7.5

7.5

11

1111

11

11 11

11

1515

15

1515

15

15

18.5

18.5

18.5

18.5

18.5

22

2222

22

22

22

30

30

30

30

30

30

37

3737

37

3737

4545

45

45

45

55

55

55

55

75

75

75

1.1

1.1

1.1

1.1

1.1

1.1

4

4

2

8

50

80 0.1

8 03 0402 80 200 400 600 800300100606 01

2 6 8 10 20 30 60 80 100 200403 4

m³/h

l/s

mTo

tal H

ead

Capacity

GSD 4P 50 Hz1500 RPM Synchronous

speed

m³/min

10020 40 60 80 200 400 600

4 6 8 10 20 40 60 80 100 200

0.2 0.3 0.4 0.6 0.8 1 2 3 4 6 10

8

10

15

20

30

40

60

80

100

150

4

35.5

5.5

5.5

7.5

7.5

7.5

7.5

9.2

9.2

9.29.2

11

11

11

11

11

15

15

15

15

18.518.5

18.518.5

18.5

22

2222

3030

30

30

37

37

37

37

45

45

45

55

5555

75

11

15

30

37

75

9090

110

1.51.5

2.2

2.2

4

4

3

3

3

5.5

5.5

5.5

7.5

9.2

11

11

15

15

18.5

18.5

18.5

22

22

30

30

3037

37

45

45

45

55

55

55

55

75

75 75

75

75

75

75

90

90

90

110

110

110

110

80-250

100-160

100-200

100-250

125-200

150-200

32-125

32-160

32-200

32-250

40-125

40-160

40-200

40-250

40-315

65-125

50-160

65-160

50-20065-200

50-250 65-250

50-315

80-160

80-200

65-315

50-125

m³/h

l/sCapacity

mTo

tal H

ead

GSD 2P 50 Hz3000 RPM Synchronous

speed

Model code: 80-250Discharge size - mm Nominal impeller diameter - mm

Supplied as standard with spacers and/or

supports where required.

Available mounted on a galvanised steel baseplate.

Configuration with motor spacers, pump spacers, and/or stays varies depending

on pump/motor combination.

The GSD is a versatile high quality compact close coupled motor pump, and with 237 pump end/motor combinations available there are models suitable for many applications and duties wherever water needs to be transferred or boosted.

Standard OptionPump Type Close coupled end suction motor pump

to EN733 (Pump end dimensions)#

Flanges DIN/EN PN 16 (EN 1092-1)

Scope Pump discharge 32 mm to 150 mmMotor power 2 Pole: 1.5 to 110 kW

4 Pole: 1.1 to 75 kW

Performance 2 pole: (Q) 8 - 800 m³/hr (H) 10 - 150 m hd4 pole: (Q) 4 - 650 m³/hr (H) 3 - 70 m hd

Type Water

Temperature -10° to +120°C

Max. allowable working pressure (MAWP) 16 Bar*

Max. allowable suction pressure (MASP)** <16 Bar-Pump shut-off pressure (PSP)

Construction Impeller Closed centrifugal

Shaft Stub shaft & hub

Mechanical seal Single spring, rubber bellows (to EN12756)

Materials Casing Cast iron (FC250)

Impeller

Casing wear ring

Bronze (CAC 406)

Bronze (CAC 406)

Shaft 420 Stainless steel (wetted part)

Mechanical Seal SiC/Carbon/EPDM

Back cover Cast iron (FC250)

Motor bracket Cast iron (FC250)

Spacers Refer page 11

Motor Type WEG W21

Efficiency Std IE3 (or E2)

Enclosure IP55

Insulation class Class F

Motor frame material Aluminium Cast Iron Supply Motor pump c/w spacers where required. On galvanised steel baseplate

** MASP < MAWP - PSP

Liquid handled

* 16 Bar rating to ISO5199

(up to 200 Fr.) (225 Fr. & above)

# Except model 150-315

Cast Iron End Suction Motor Pumps (to EN733) Cast Iron End Suction Motor Pumps (to EN733) GSDGSD

PERFORMANCE CHART

SPECIFICATIONS

0.2 0.3 0.4 0.6 0.8 1 2 3 4 6 10

3

456

10

15

20

30

40

60

m³/min

32-200

32-250

50-125

65-125

40-160 50-160 65-160 80-160

100-160

40-200 50-20065-200 80-200

100-200125-200

150-200

40-25050-250 65-250 80-250 100-250

125-250150-250

40-31550-315

65-31580-315

100-315

125-315

150-315

80-400100-400

125-400150-400

1.5

1.5

1.5

1.5

1.5

1.51.5

2.2

2.2

2.2

2.22.2

2.2

2.2

2.2

3

3

3

3

3

3

4

4 4

4

4

4

5.5

5.5

5.5

5.5

5.5

5.5

7.57.5

7.5

7.5

7.5

7.5

7.5

7.5

11

1111

11

11 11

11

1515

15

1515

15

15

18.5

18.5

18.5

18.5

18.5

22

2222

22

22

22

30

30

30

30

30

30

37

3737

37

3737

4545

45

45

45

55

55

55

55

75

75

75

1.1

1.1

1.1

1.1

1.1

1.1

4

4

2

8

50

80 0.1

8 03 0402 80 200 400 600 800300100606 01

2 6 8 10 20 30 60 80 100 200403 4

m³/h

l/s

mTo

tal H

ead

Capacity

GSD 4P 50 Hz1500 RPM Synchronous

speed

m³/min

10020 40 60 80 200 400 600

4 6 8 10 20 40 60 80 100 200

0.2 0.3 0.4 0.6 0.8 1 2 3 4 6 10

8

10

15

20

30

40

60

80

100

150

4

35.5

5.5

5.5

7.5

7.5

7.5

7.5

9.2

9.2

9.29.2

11

11

11

11

11

15

15

15

15

18.518.5

18.518.5

18.5

22

2222

3030

30

30

37

37

37

37

45

45

45

55

5555

75

11

15

30

37

75

9090

110

1.51.5

2.2

2.2

4

4

3

3

3

5.5

5.5

5.5

7.5

9.2

11

11

15

15

18.5

18.5

18.5

22

22

30

30

3037

37

45

45

45

55

55

55

55

75

75 75

75

75

75

75

90

90

90

110

110

110

110

80-250

100-160

100-200

100-250

125-200

150-200

32-125

32-160

32-200

32-250

40-125

40-160

40-200

40-250

40-315

65-125

50-160

65-160

50-20065-200

50-250 65-250

50-315

80-160

80-200

65-315

50-125

m³/h

l/sCapacity

mTo

tal H

ead

GSD 2P 50 Hz3000 RPM Synchronous

speed

Model code: 80-250Discharge size - mm Nominal impeller diameter - mm

Supplied as standard with spacers and/or

supports where required.

Available mounted on a galvanised steel baseplate.

Configuration with motor spacers, pump spacers, and/or stays varies depending

on pump/motor combination.

The GSD is a versatile high quality compact close coupled motor pump, and with 237 pump end/motor combinations available there are models suitable for many applications and duties wherever water needs to be transferred or boosted.

Standard OptionPump Type Close coupled end suction motor pump

to EN733 (Pump end dimensions)#

Flanges DIN/EN PN 16 (EN 1092-1)

Scope Pump discharge 32 mm to 150 mmMotor power 2 Pole: 1.5 to 110 kW

4 Pole: 1.1 to 75 kW

Performance 2 pole: (Q) 8 - 800 m³/hr (H) 10 - 150 m hd4 pole: (Q) 4 - 650 m³/hr (H) 3 - 70 m hd

Type Water

Temperature -10° to +120°C

Max. allowable working pressure (MAWP) 16 Bar*

Max. allowable suction pressure (MASP)** <16 Bar-Pump shut-off pressure (PSP)

Construction Impeller Closed centrifugal

Shaft Stub shaft & hub

Mechanical seal Single spring, rubber bellows (to EN12756)

Materials Casing Cast iron (FC250)

Impeller

Casing wear ring

Bronze (CAC 406)

Bronze (CAC 406)

Shaft 420 Stainless steel (wetted part)

Mechanical Seal SiC/Carbon/EPDM

Back cover Cast iron (FC250)

Motor bracket Cast iron (FC250)

Spacers Refer page 11

Motor Type WEG W21

Efficiency Std IE3 (or E2)

Enclosure IP55

Insulation class Class F

Motor frame material Aluminium Cast Iron Supply Motor pump c/w spacers where required. On galvanised steel baseplate

** MASP < MAWP - PSP

Liquid handled

* 16 Bar rating to ISO5199

(up to 200 Fr.) (225 Fr. & above)

# Except model 150-315

Cast Iron End Suction Motor Pumps (to EN733) GSD

* All specifications are subject to change without prior notice.* Dimensional details are provided for reference only.

EBARA Pumps Malaysia Sdn Bhd6, Jalan TP3, UEP Subang Jaya Industrial Park,47620 Subang Jaya, Selangor, Malaysia.Tel : 03-8023 6622 Fax : 03-8023 9355Email : sales@ebara.com.my Website : www.ebara.com.my

EPM GD 0719

Authorised dealer:

PUMP

FEATURES

APPLICATIONS

Cast Iron End Suction Motor Pumps(to EN733) Type GSD

• Water supply & pressure bossting• Building services & cooling towers• Industrial• Irrigation, etc.

RANGE

• 37 pump end sizes• Nominal impeller sizes from 125 to 400mm• 1.5 to 110 kW 2 pole motors• 1.1 to 75 kW 4 pole motors• Discharge sizes from 32mm to 150mm• Flows to 800m3/h; Heads to 150m

A versatile high quality compact close coupled motor pump suitable or many applications where water needs to be transferred or boosted.

• Pump dimensions to EN733• High efficiency hydraulic design (MEI > 0.6 all models)• Cast Iron/Bronze/Stanless steel construction• Compact close coupled design.• SiC/C/EPDM Burgmann seal• Front & rear bronze wear rings• 16 bar casings [to ISO5199] (24 bar hydrostatic test pressure)

• Precision 2 piece stub shaft & hub design• Quality high efficiency WEG motors

CONFIGURATIONS

Pumpsets with motors over 90 frame* are fitted with spacers for ease of installation and maintenance. There are various types and combinations of spacers depending on the model. The motors are bolted to the motor spacers, so that the complete rotating element with motor and spacers is a single rigid assembly that can be “slid” back for ease of maintenance and reassembly.

3A161

Motor spacers

3B

(Solid bar/paint)

3C

4A

162

Front view(Cast iron/paint)

5A162

Front view

Pump spacers(Cast iron/paint)

Motor spacers&

161

5B

Front view

(Solid bar/paint)

1A095

Stay

2A

No spacers

6A

Motor spacer(Folded base)

161

6B

(Folded base/Zn)

GSD4 40-315/4.0 kW* plus

GSD4 100-160/2.2 kWGSD4 100-160/3.0 kWGSD4 100-200/3.0 kW

Applies to 90 frame motors*

095Item

162

161

StayDescription

Folded steelMaterial

PaintFinish

1Qty.

1AApplies to

4A,5A,5B

3B,5B3A,5A

3C6A6B

2,4,6

22211

Pump spacer Cast iron Paint

Motor spacer Folded steel

Steel bar Paint

Paint

Channel (down)Channel (side)BaseplateBaseplate

Rectangular-

-

Style

Zn plated

Zn plated

Zn plated

Specifications: Stays, Motor spacers, Pump spacers

161

162161

161

161

Pump spacers

(Folded Channel/Zn)

(Folded Channel/Zn)

(Folded Channel/Zn)

(Folded base/paint)

GSD4 40-315/4.0 kW* following models use a stay instead of motor spacers

GSD4 100-160/2.2 kWGSD4 100-160/3.0 kWGSD4 100-200/3.0 kW

All models with 90 frame motors (and the 4 models above) have a single stay as

shown on the drawing.Stay