Upload
johnjon
View
215
Download
2
Embed Size (px)
DESCRIPTION
Versiunea in 2 Usi - Stalp ford focus mk1
Citation preview
Focus Table of ContentsGroup 5: Body and PaintSection 501-05: INTERIOR TRIM AND ORNAMENTATIONREMOVAL AND INSTALLATION
B-Pillar Trim Panel (436170)
Removal
4-door, 5-door and wagon1. Detach the safety belt lower anchor.
Remove the safety belt bolt from the anchor.
3-door2. Detach the safety belt lower anchor.
All vehicles3. Remove the B-pillar trim panel retaining push pin (if equipped).
4. Remove the B-pillar trim panel.
Installation
3-door1. Note:
To aid installation, the safety belt height adjuster should be at the lowest position.
To install, reverse the removal procedure.
4-door, 5-door and wagonRefer to corresponding illustration.