w bwm11401800en-GB05.1 - Scania Group · ing an additional cable harn ess from C494 to DIN connect ors C486, C487 and C488. The variant code for the cable harness is 2411F. Extension

11:40-18 Issue 5.1 en-

C494 – Connector for cable harness from cab to frame
C494
Further information about bridging signals is contained in the document Cables and cable harnesses.

Information about how the connector is connected to the DIN-connectors C486, C487 and C488 (variant code 2411F) on the frame is provided further on in the doc-ument.

C494

C494

C494

C494

343

788

C494 C494 is a 21-pin connector that gives the bodybuilder access to a number of signals and functions, depending on the vehicle specification.

The connector also makes it possible to adapt the vehicle by bridging the signals to other connectors on the bodywork console.

The connector is blue and is located on the outer part of the bodywork bracket.

Note:• The location of C494 varies, depending on whether the bodywork console has

space for 6, 7 or 8 connectors. See the illustration below on the right. Positioning all the way to the left applies from autumn 2014.

• For vehicles built before 20 January 2005 with preparation for tail lift (variant code 3026B) and power take-off (variant code 3026C) respectively, the connector has 18 pins and is grey.

316

358

GB 1 (14)© Scania CV AB 2015, Sweden

C494 – Connector for cable harness from cab to frameConnections to DIN connectors on the frame

Connections to DIN connectors on the frameSignals from the instrument panel and central electric unit are routed to the frame us-ing an additional cable harness from C494 to DIN connectors C486, C487 and C488. The variant code for the cable harness is 2411F.

Extension cables for further connection to DIN connectors on the frame are available as an option for all vehicles. They are ADR classified and are available in several dif-ferent lengths.

The tables show how pins in C494 are connected to the DIN connectors.

© Scania CV AB 2015, Sweden

11:40-18 Issue 5.1 en-GB 2 (14)


ments

ted conductors, e.g. for inductive sensors

ted conductors, for e.g. CAN signals

Vehicle production periodProduction site Chassis serial number

2005-04-21 -

Södertälje 2 008 485 -

Zwolle 5 123 846 -

Angers 9 099 937 -

Pin Connected to Colour in cable harness on frame Area mm2 Com1 C487/1 Green 1.5

Twis2 C487/2 Violet 1.5

3 C487/3 Grey 1.5

4 C487/4 Orange 1.5

Twis5 C487/5 Brown 1.5

6 C487/6 Blue 1.5

7 C487/7 Red 1.5

8 C488/1 Violet 1.5

9 C488/2 Blue 1.5

10 C488/3 Grey 1.5

11 C488/4 Green 1.5

12 C488/5 Brown 1.5

13 C488/6 Red 1.5

14 C488/7 Orange 1.5

15 C486/1 Yellow 2.5

16 C486/2 Black 2.5

17 C486/3 Grey 2.5

18 C486/4 Brown 2.5

19 C486/5 Orange 2.5


11:40-18 Issue 5.1 en-GB 3 (14)


ments above

ments
20 C486/6 Blue 2.5
21 C486/7 Violet 2.5


2005-01-21 - 2005-04-20Södertälje 2 006 429 - 2 008 484

Zwolle 5 117 958 - 5 123 845

Angers 9 097 244 - 9 099 936

Pin Connected to Colour in cable harness on frame Area mm2 Com1–14 C487 and C488 See the table

15 C486/1 Red 2.5

16 C486/2 Black 2.5

17 C486/3 Red 2.5

18 C486/4 Black 2.5

19 C486/5 Black 2.5

20 C486/6 Blue 2.5

21 C486/7 Grey 2.5

Pin Connected to Colour in cable harness on frame Area mm2 Com


11:40-18 Issue 5.1 en-GB 4 (14)


ments above


- 2005-01-20Södertälje - 2 006 428

Zwolle - 5 117 957

Angers - 9 097 243

Pin Connected to Colour in cable harness on frame Area mm2 Com1–7 C487 See the table

8 C488/1 Yellow 1.5

9 C488/2 Blue 1.5

10 C488/3 Grey 1.5

11 C488/4 Green 1.5

12 C488/5 Brown 2.5

13 C488/6 Red 2.5

14 C488/7 Black 2.5

15 C486/1 Orange 2.5

16 C486/2 Grey 1.5

17 C486/3 Blue 1.5

18 C486/4 Brown 1.5


11:40-18 Issue 5.1 en-GB 5 (14)

C494 – Connector for cable harness from cab to frameChassis conditions and pin functions

s

ith the option Cable harness for tail lift


317

137

4 10 137 19

20

16

5 11 148 17

21181512963

2

1

Chassis conditions and pin functionsThe following information applies to connections on the vehicle that may be factory-fitted depending on specific product choices.


2014-11-17 -

Södertälje 2 105 883 -

Zwolle 5 371 386 -

Angers 9 192 404 -

2015-02-02 -

São Bernardo do Campo 3 872 427 -

Pin Connected to Description Comment1 C489-7 Work light

Vehicles w2 RP26-4 Side marker lamp, load compartment, left

3 RP26-2 Side marker lamp, load compartment, right

4 Not used -

5 Not used -

5 S152-7 Activation of internal lighting in the box body Vehicles w

6 Not used -

7 Not used -


11:40-18 Issue 5.1 en-GB 6 (14)


operation unit for vehicles with air suspension

ith Alarm option


ith option Cable harness for tail lift

s
8 C447-4 Data
For Scania9 C447-3 Clock

10 C447-2 Ground

11 C447-1 Power supply to operation unit

12 Alarm GSM wake up

Vehicles w13 Alarm Auxiliary signal, alarm triggered

14 Alarm Auxiliary signal, alarm activated

15 S132-7 Tail lift activation Vehicles w

16–19 Not used - -

20 C234-1 Warning, tail lift not in parking position Vehicles w

21 Not used - -

Pin Connected to Description Comment


11:40-18 Issue 5.1 en-GB 7 (14)


s


quipped with the option Remote engine starta


317

137

4 10 137 19

20

16

5 11 148 17

21181512963

2

1

Chassis conditions and pin functionsThe following information applies to connections on the vehicle that may be factory-fitted depending on specific product choices.


2008-02-21 - 2014-11-16

Södertälje 2 036 226 - 2 105 882

Zwolle 5 200 028 - 5 371 385

Angers 9 130 725 - 9 192 403

2008-02-21 - 2015-02-01

São Bernardo do Campo 3 623 744 - 3 872 426

Pin Connected to Description Comment1 C489-7 Work light

Vehicles w2 RP26-4 Side marker lamp, load compartment, left

3 RP26-2 Side marker lamp, load compartment, right

4 C259-12 Monitored remote engine shutdownVehicles e

5 C259-13 Remote engine start

5 S152-7 Activation of internal lighting in the box body Vehicles w

6 C259-21 CAN high

7 C259-20 CAN low


11:40-18 Issue 5.1 en-GB 8 (14)


operation unit for vehicles with air suspension

ith Alarm option



s
8 C447-4 Data
For Scania9 C447-3 Clock

10 C447-2 Ground

11 C447-1 Power supply to operation unit

12 Alarm GSM wake up

Vehicles w13 Alarm Auxiliary signal, alarm triggered

14 Alarm Auxiliary signal, alarm activated

15 S132-7 Tail lift activation Vehicles w

16–19 Not used - -


21 Not used - -

a. These pre-fitted conductors are excluded in the option Cable harness for tail lift.



11:40-18 Issue 5.1 en-GB 9 (14)


s


317

137

4 10 137 19

20

16

5 11 148 17

21181512963

2

1


2007-10-23 - 2008-01-20Södertälje 2 031 571 - 2 036 225

Zwolle 5 188 732 - 5 200 027

Angers 9 125 979 - 9 130 725

Pin Connected to Description Comment1–19 See the table above


21 See the table above


11:40-18 Issue 5.1 en-GB 10 (14)


ts

ith option for Remote activation of engine


317

137

4 10 137 19

20

16

5 11 148 17

21181512963

2

1


2005-01-25 - 2007-10-22Södertälje 2 006 429 - 2 031 570

Zwolle 5 117 958 - 5 188 731

Angers 9 097 244 - 9 125 978

Pin Connected to Description Commen1–3 Not used - -

4 C259-12 Monitored remote engine shutdown Vehicles wstarting5 C259-13 Remote engine start

6–15 See the table above

16 S152-7 Switch, load compartment lighting Vehicles w

17–21 Not used - -


11:40-18 Issue 5.1 en-GB 11 (14)


s

nection of bogie drive roller

A continuous current

with symbol included, +24 V out

nection of tail lift

A incl. pin 14 and 18 continuous current

with symbol included

o be activated when the starter lock is not in osition, +24 V out

316

434

1 4 7 10 13

5 8 11 14

16

17

181512963

2

The following applies to the earlier option Tail lift, preparation (variant code: 3026B).


- 2005-01-20Södertälje - 2 006 428

Zwolle - 5 117 957

Angers - 9 097 243

Pin Connected to Description Comment1 C489-8 Extra switch for working lamps

2 C489-19 Status and warning lamp 6



5-7 Not used - -

8–11 See the table above

12 Switch S133-3 Bogie drive roller • For con

• Max. 6

• Switch

13 Switch S132-3 Tail lift • For con

• Max 12

• Switch

• Can alsdrive p


11:40-18 Issue 5.1 en-GB 12 (14)


nection of sand spreader or automatic snow

A continuous current incl. pin 13 and 18


switch for anti-skid device in connector S131 d by 3-way switch which can be purchased cania

A continuous current incl. pin 13 and 14, +24

s
14 Switch S131-3 Sand spreader or automatic snow chains • For con
chains

• Max 12

• Switch

15–17 Not used - -

18 Switch S131-6 Sand heating for sand spreader • 2-way replacefrom S

• Max 12V out



11:40-18 Issue 5.1 en-GB 13 (14)


s

nection of bogie drive roller

A continuous current


nection of rotating beacon behind cab

A continuous current, +24 V out

316

434

1 4 7 10 13

5 8 11 14

16

17

181512963

2

The following applies to the earlier option Power take-off, preparation (variant code: 3026C).


- 2005-01-20Södertälje - 2 006 428

Zwolle - 5 117 957

Angers - 9 097 243

Pin Connected to Description Comment1–11 See the table above

12 Switch S133-3 Bogie drive roller • For con

• Max. 6

• Switch

13 Not used - -


15 C259-12 Monitored remote engine shutdown

16 C259-13 Remote-activated engine starting

17 From Central electric unit

Rear rotating beacon • For con

• Max 6



11:40-18 Issue 5.1 en-GB 14 (14)

Documents

w bwm11401800en-GB05.1 - Scania Group · ing an additional cable harn ess from C494 to DIN connect ors C486, C487 and C488. The variant code for the cable harness is 2411F. Extension