64
120 North Church Street Suite 208 West Chester, PA 19380 T 484.266.0648 www.merjedesign.com ENVIRONMENTS & EXPERIENCES Eugene, Oregon Wayfinding and Signage System Parking Signage DESIGN INTENT DRAWINGS October 16, 2017

Wayfinding and Signage System - Eugene, OR

  • Upload
    others

  • View
    6

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Wayfinding and Signage System - Eugene, OR

120 North Church Street

Suite 208

West Chester, PA 19380

T 484.266.0648

www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

Eugene, OregonWayfinding and Signage System

Parking Signage

DESIGN INTENT DRAWINGS

October 16, 2017

Page 2: Wayfinding and Signage System - Eugene, OR

Table of Contents

Section 1 – SIGN SYSTEM STANDARDS A. Graphic Standards Typography Specifications ................................... A.1 Project Artwork ...................................................... A.4 Reflective and Opaque Vinyl Color Chart ........... A.5 Paint and Material Color Chart ............................ A.6

B. Placement Guidelines Vehicular Signage .................................................. B.1 Lateral Clearance ................................................... B.3

Section 2 – SIGNAGE DRAWINGS C. Menu of Sign Types Parking Directionals .............................................. C.1 Parking Garage ID .................................................. C.2 Parking Garage Interior Signs .............................. C.3

D. Design Intent Drawings PARK.1 ..................................................................... D.1 PARK.1a ................................................................... D.2 PARK.1b ................................................................... D.3 PARK.2 .................................................................... D.4 PARK.2a .................................................................. D.5 PARK.3 .................................................................... D.6 WDIR.1..................................................................... D.7 VINYL.1 ................................................................... D.8 PARK.4 .................................................................... D.9 PARK.5 .................................................................... D.10 PARK.6 .................................................................... D.11 PARK.6a .................................................................. D.12 PARK.7 ..................................................................... D.13 Broadway N Garage Entrance .............................. D.14 Broadway S Garage Entrance .............................. D.15 Hult Garage Entrance 1 ......................................... D.16 Hult Garage Entrance 2 ......................................... D.17 Hult Garage Entrance 3 ......................................... D.18 Hult Garage Entrance 4 ......................................... D.19 Overpark Entrance ................................................. D.20 Overpark Exit ......................................................... D.21 Parcade Entrance 1 ................................................ D.22 Parcade Entrance 2 ................................................ D.23 Pearl Street Garage Entrance ............................... D.24 OVD.1 ....................................................................... D.25 COLUMN.1 .............................................................. D.26 INFO.1 ...................................................................... D.27 SPACE.1 ................................................................... D.28 TEMP.1 ..................................................................... D.29 ELEVATOR.1 ............................................................ D.30 RULES.1................................................................... D.31 STAIR.1 .................................................................... D.32 STAIR.2 ................................................................... D.33 METER.1-2 ............................................................... D.34 BOOTH.1 ................................................................. D.35

E. Graphic Layouts PARK.1-2 .................................................................. E.1 PARK.3 .................................................................... E.2

F. Construction Details PARK.1-3 Section Details ...................................... F.1 Break-Safe Product Specifications ...................... F.2 Break-Safe Foundations ........................................ F.3 Plate-to-Plate Footer Details ................................ F.4 Footer Placement ................................................... F.5 Internally Illuminated Letters ............................... F.6

Page 3: Wayfinding and Signage System - Eugene, OR

Graphic StandardsA

Page 4: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

A.1

The Clearview typeface is the required message font for vehicular sign types VDIR.1-6

All type shall be set exactly as specified. Substitutions will only be accepted, at the DESIGNER’S discretion, where they match the specified typeface in every detail. The FABRICATOR should be aware that different versions of typesetting equipment may not satisfactorily match specified typefaces and in such instances will not be acceptable.

TypographySpecifications

Clearview Highway

ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890 ‘’!@#$%^

Amongst the several mechanical Arts that have engaged my attention, there is no one which I have pursued with so much steadiness and pleasure, as that of Letter Founding.

Downtown Downtown Downtown

123A 123A 123A

acceptable NOT acceptable NOT acceptable

acceptable NOT acceptable NOT acceptable

’'

This apostrophe is CORRECT.

Clearview Highway

This apostrophe is INCORRECT.

Sometimes the Foot mark is mistakenfor an apostrophe and an inch mark ismistaken for quotations. Below are examplesof correct and incorrect apostrophe’s foreach typeface.

PARK’S

PARK'S

TYPEFACE FOR: PARKING GUIDE SIGNS

Page 5: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

A.2

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Futura MediumABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890 !@#$%^Amongst the several mechanical Arts that have engaged my attention, there is no one which I have pursued with so much steadiness and pleasure, as that of Letter Founding.

Downtown Downtown Downtown

123A 123A 123Aacceptable NOT acceptable NOT acceptable

acceptable NOT acceptable NOT acceptable

Futura Book ObliqueABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890 !@#$%^Amongst the several mechanical Arts that have engaged my attention, there is no one which I have pursued with so much steadiness and pleasure, as that of Letter Founding.

Downtown Downtown Downtown

123A 123A 123Aacceptable NOT acceptable NOT acceptable

acceptable NOT acceptable NOT acceptable

Futura MediumABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890 !@#$%^Amongst the several mechanical Arts that have engaged my attention, there is no one which I have pursued with so much steadiness and pleasure, as that of Letter Founding.

Downtown Downtown Downtown

123A 123A 123Aacceptable NOT acceptable NOT acceptable

acceptable NOT acceptable NOT acceptable

Futura Book ObliqueABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890 !@#$%^Amongst the several mechanical Arts that have engaged my attention, there is no one which I have pursued with so much steadiness and pleasure, as that of Letter Founding.

Downtown Downtown Downtown

123A 123A 123Aacceptable NOT acceptable NOT acceptable

acceptable NOT acceptable NOT acceptable

TYPEFACE FOR: PARKING SIGNAGE

TypographySpecifications

The Futura Medium & Futura Book Oblique typefaces are utilized on the parking signs.

All type shall be set exactly as specified. Substitutions will only be accepted, at the DESIGNER’S discretion, where they match the specified typeface in every detail. The FABRICATOR should be aware that different versions of typesetting equipment may not satisfactorily match specified typefaces and in such instances will not be acceptable.

Page 6: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

A.3

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Typography Specifications

Individual spacing of each letter needs to be evaluated. All copy shall be kerned so that each character is optically centered between the center of each of the surrounding characters.

Eugene Eugene

Eugene Eugene

SIGN TEXT STANDARDS

LETTER-SPACING

IMPORTANT: Individual spacing of each letter needs to be evaluated. See Examples Above.Kern all Copy so that each character is optically centered between the center of each of the surrounding characters.

TYPEFACE 1 TYPEFACE 1

TYPEFACE 2 TYPEFACE 2

Inconsistencies in Letter Spacing Corrected Letter Spacing

XbaselinebaselineEjklHEjklH

COPY HEIGHT

When measuring copy height, measure only the height of the Capital lettersto determine your overall copy height (shown in illustration below as “X”)Some of the other letters have an extended height beyond the average height of the letters.

baselinebaseline

baselinebaseline

EjklHEjklHEjklHEjklH

LINE SPACING

X

When measuring line spacing, always measure from the baseline of the topmost text line to the baseline of the text line below (shown as “X”)

Page 7: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

A.4

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Artwork

ARROWS

SYMBOLS

USE of Arrows

When multiple directions arerequired on a sign, the followingdirectional hierarchy shall takeprecedent. See Example below.Reference Message Schedulefor individual Messages.

Utilized in Parking Directional signage

Utilized in Parking signage

Parking RestroomAccessibleE Park Logo

Left Arrow Up-Left Arrow Straight Arrow Up-Right Arrow Right Arrow

Straight-Left Arrow Up-Straight-Left Arrow Up-Straight-Right Arrow Straight-Right Arrow

Straight Arrow

Left Arrow

Right Arrow

parkeparkeugene.com

All artwork pictured on this page will be provided to the sign fabricator by the designer and/or client. This artwork must be used for all sign applications in this provided documentation. Do NOT substitute with any other artwork!

ARROWS

SYMBOLS

USE of Arrows

When multiple directions arerequired on a sign, the followingdirectional hierarchy shall takeprecedent. See Example below.Reference Message Schedulefor individual Messages.

Utilized in Parking Directional signage

Utilized in Parking signage

Parking RestroomAccessibleE Park Logo

Left Arrow Up-Left Arrow Straight Arrow Up-Right Arrow Right Arrow

Straight-Left Arrow Up-Straight-Left Arrow Up-Straight-Right Arrow Straight-Right Arrow

Straight Arrow

Left Arrow

Right Arrow

parkeparkeugene.com

Page 8: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

A.5

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Reflective and Opaque Vinyl

Color Chart

The FABRICATOR must submit three (3) identical sets of each color specified for approval prior to any painting. Sample paint swatches must be produced on .080" aluminum sheet, approximately 3" x 6", including primer and free of defects. Sample material swatches should be the same approximate size. Samples MUST have project and color specifications attached to back side.

The colors must look exactly the same every time they are used so that people associate them with the City of Eugene Wayfinding Program. All media, vinyl, paint, and inks must be produced so that the colors match as specified on this page.

White

Parking Blue

Teal

R REFLECTIVE VINYL NAME SPECIFICATION APPLICABLE PROCESS

R1

R2

R3

R4 Dark Gray

White

3M High Intensity Prismatic Reflective Sheeting 3930Color: White

3M High Intensity Prismatic Reflective Sheeting 3930Color Match: Pantone® 2388 C

3M High Intensity Prismatic Reflective Sheeting 3930Color Match: Pantone® Cool Gray 11 C

3M High Intensity Prismatic Reflective Sheeting 3930Color Match: Pantone® 2199 C

3M Scotchcal ElectroCut Opaque Vinyl Film7725-10 White

Custom Color: Background and Characters 3M custom inks direct to 3930 with 3M approved Clear UV/Graffiti overlaminate. *Applied according to Manufacturers Spec to aluminum sheet.

Custom Color: Background and Characters 3M custom inks direct to 3930 with 3M approved Clear UV/Graffiti overlaminate. *Applied according to Manufacturers Spec to aluminum sheet.

Custom Color: Background and Characters 3M custom inks direct to 3930 with 3M approved Clear UV/Graffiti overlaminate. *Applied according to Manufacturers Spec to aluminum sheet.

Knockout White: Background and Characters 3M custom inks direct to 3930 with 3M approved Clear UV/Graffiti overlaminate. *Applied according to Manufacturers Spec to aluminum sheet.

* MUST comply with MUTCD section Table 2A-3 – Minimum maintained retroreflectivity levels. Approved process: Durst RHO 161 TS printer. Sherine Industries: (604) 513-1887.NOTE: All 3M products are to be processed and applied according to 3M specifications. The seaming of material is NOT preferred. If the height of a sign panel is greater then 48 inches,the 3M 3930 material should be oriented vertically with stripes at 0 degrees, to avoid the seaming of material. If seaming is required, it should occur at the rule line or between messages.

Standard for System (typ.)

Standard for System (typ.)

Standard for System (typ.)

Standard for System (typ.)

Standard for System (typ.)

RedR5

R6 Yellow3M High Intensity Prismatic Reflective Sheeting 3930Color Match: Pantone® 121 C

3M High Intensity Prismatic Reflective Sheeting 3930Color Match: Pantone® 485 C

Custom Color: Background and Characters 3M custom inks direct to 3930 with 3M approved Clear UV/Graffiti overlaminate. *Applied according to Manufacturers Spec to aluminum sheet.

Custom Color: Background and Characters 3M custom inks direct to 3930 with 3M approved Clear UV/Graffiti overlaminate. *Applied according to Manufacturers Spec to aluminum sheet.

Standard for System (typ.)

Standard for System (typ.)

V VINYL NAME SPECIFICATION APPLICABLE PROCESS

V1 Surface applied according to 3M manufacturers specifications.

Surface applied according to 3M manufacturers specifications.

Black3M Scotchcal ElectroCut Opaque Vinyl Film7725-12 Black

Standard for System (typ.)V2 High resolution printed on White 3M Scotchcal Opaque Vinyl with 3M approved Clear UV/Graffiti overlaminate. Surface applied according to 3M manufacturers specifications.

High resolution printed on White 3M Scotchcal Translucent Vinyl with 3M approved Clear UV/Graffiti overlaminate. Surface applied according to 3M manufacturers specifications.

Parking Blue3M Scotchcal ElectroCut Opaque Vinyl FilmColor Match: Pantone® 2388 C

Standard for System (typ.)V3 High resolution printed on White 3M Scotchcal Opaque Vinyl with 3M approved Clear UV/Graffiti overlaminate. Surface applied according to 3M manufacturers specifications.

Frosted Crystal3M Scotchcal Frosted Crystal3M 7725SE-324

Standard for System (typ.)V4

Parking Blue3M Scotchcal ElectroCut Translucent Vinyl FilmColor Match: Pantone® 2388 C

Standard for System (typ.)V5

Page 9: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

A.6

The FABRICATOR must submit three (3) identical sets of each color specified for approval prior to any painting. Sample paint swatches must be produced on .080" aluminum sheet, approximately 3" x 6", including primer and free of defects. Sample material swatches should be the same approximate size. Samples MUST have project and color specifications attached to back side.

The colors must look exactly the same every time they are used so that people associate them with the City of Eugene Wayfinding Program. All media, vinyl, paint, and inks must be produced so that the colors match as specified on this page.

Paintand Materials Color Chart

Matthews Paint MP 11477

To match Pantone® 2388 C

To match Pantone® 2199 C

To match Pantone® Cool Gray 11 C

To match Pantone® 583 C

Standard for System (typ.) Surface applied, exterior sign paint and protective top coat:MATTHEWS Acrylic Polyurethane with Clear Coat Satin finish.

Surface applied, exterior sign paint and protective top coat:MATTHEWS Acrylic Polyurethane with Clear Coat Satin finish.

Surface applied, exterior sign paint and protective top coat:MATTHEWS Acrylic Polyurethane with Clear Coat Satin finish.

Surface applied, exterior sign paint and protective top coat:MATTHEWS Acrylic Polyurethane with Clear Coat Satin finish.

Surface applied, exterior sign paint and protective top coat:MATTHEWS Acrylic Polyurethane with Clear Coat Satin finish.

Surface applied, exterior sign paint and protective top coat:MATTHEWS Acrylic Polyurethane with Clear Coat Satin finish.

Standard for System (typ.)

Standard for System (typ.)

Standard for System (typ.)

Standard for System (typ.)

Standard for System (typ.)

P PAINTS NAME SPECIFICATION APPLICABLE PROCESS

P1

P2

P3

P4

P5

P6

White

Parking Blue

Teal

Green - Level 1

To match Pantone® 122 C Surface applied, exterior sign paint and protective top coat:MATTHEWS Acrylic Polyurethane with Clear Coat Satin finish.Standard for System (typ.)P7 Yellow - Level 2

Dark Gray

To match Pantone® 158 C

To match Pantone® 279 C

To match Pantone® 1805 C

To match Mathews Paint MP33653

Surface applied, exterior sign paint and protective top coat:MATTHEWS Acrylic Polyurethane with Clear Coat Satin finish.

Surface applied, exterior sign paint and protective top coat:MATTHEWS Acrylic Polyurethane with Clear Coat Satin finish.

Surface applied, exterior sign paint and protective top coat:MATTHEWS Acrylic Polyurethane with Clear Coat Satin finish.

Surface applied, exterior sign paint and protective top coat:MATTHEWS Acrylic Polyurethane with Clear Coat Satin finish.

Standard for System (typ.)

Standard for System (typ.)

Standard for System (typ.)

Standard for System (typ.)

P8

P9

P10

P11

Orange- Level 3

Red - Level 5

Black Stallion

Blue - Level 4

Willam

ette

Broadway

8th Ave

7th Ave

6th Ave

10th Ave

11th Ave

Olive

Charn

elton

Oak

Pearl

2

3

4

7

8

426

55

Willamette River

Willa

mette

Riv

er

ParkBlocks

Skinner Butte Park

Kiwanis Park

Alton BakerPark

Ruth Bascom Bike Path

Ruth

Basco

m B

ike P

ath

Ruth

Basc

om

Bik

e P

ath

Pearl A

lley

Hig

h A

lley

Oak A

lley

Mill A

lley

Ferry

Alle

y

Patte

rson

Alle

y

Broadway Alley

Ch

am

elto

n A

lley

Lin

co

ln A

lley

Law

ren

ce A

lley

12th Alley

11th Ave

12th Ave 12th Ave

13th Ave 13th Ave

10th Ave

Broadway Broadway Broadway

8th Ave

7th Ave

6th Ave

6th Ave

5th Ave 5th Ave

4th Ave

Cobur

g R

d

Fer

ry S

t Bridge

Co

burg

Rd

3rd Ave

2nd Ave

4th Ave

3rd Ave

3rd Ave

Skinner Butte Loop

2nd Ave

1st Ave

Clark St

Chesire Ave

Chesire Ave

Floral Ave

Shelton McMurphey Blvd

11th Ave

10th Ave

8th Ave

7th Ave

6th Ave

Oliv

e S

t

Ch

arn

elto

n S

tC

harn

elto

n S

t

Willa

me

tte S

tW

illam

ette

St

Willa

me

tte S

t

Oak S

t

Oliv

e S

t

Ch

arn

elto

n S

t

Oak S

t

Pearl S

tP

earl S

t

Lin

co

ln S

t

Law

ren

ce S

t

Wash

ing

ton

St

Oliv

e S

t

Ch

arn

elto

n S

t

Lin

co

ln S

t

Law

ren

ce S

t

Wash

ing

ton

St

Lin

co

ln S

t

Law

ren

ce S

t

Wash

ing

ton

St

Lin

co

ln S

tL

inco

ln S

t

Law

ren

ce S

t

Wash

ing

ton

St

Law

ren

ce S

t

Wash

ing

ton

St

Law

ren

ce S

t

Wash

ing

ton

St

Hig

h S

tH

igh

St

Ferry

St

Pearl S

t

Hig

h S

t

Mill S

tM

ill St

Oak S

t

Pearl S

t

Hig

h S

t

Mill S

t

Ferry

St

Patte

rson

St

Hilly

ard

St

Patte

rson

St

Hilly

ard

St

S Park St

W P

ark

St

11

17

13

10

25

28

2

23

22

27

18

5

21

20

19

3

7

8

16

4

26

6

914

12

1

Hult Garage

AmtrakLot

Ferry StreetBridge Lot

ParcadeGarage

Pearl StGarageO

verp

ark

Gara

ge

Broadway Place N.

Broadway Place S.

PublicParking

Federal Courthouse Lot

EWEBRiverfront

Lot

Hult Garage

AmtrakLot

Ferry StreetBridge Lot

ParcadeGarage

Pearl StGarageO

verp

ark

Gara

ge

Broadway Place N.

Broadway Place S.

PublicParking

Federal Courthouse Lot

EWEBRiverfront

Lot

99

99

99

9999

9999

105

i

EW

The Columns

YOU ARE HERE

5 M

IN W

AL

K5

MIN

WA

LK

5 M

IN W

AL

K5

MIN

WA

LK

5 M

IN W

AL

K

DOWNTOWNActors CabaretEugene Saturday MarketHult CenterJapanese/American Art MemorialKesey PlazaLane Community College-DowntownMcDonald TheaterOregon Contemporary TheatreRiver Play - Discovery Village PlaygroundRiverfront Plaza

1

4

7

8

9

10

12

14

18

19

20

21

22

23

25

26

27

28

Shedd InstituteShelton McMurphey Johnson HouseSkinner ‘s CabinSkinner Butte ParkVisitor CenterFree Speech PlazaWJ Skatepark + Urban PlazaWOW Hall

i

Amtrak Train StationGreyhound Bus DepotLane Transit District (LTD) Eugene Station

2

6

11

LEGEND Visitor Information

Public Parking

Train Station

Bus Station

Public Restroom

Parks

Pedestrian / Bike Trail

ARTS & CULTURE

TRANSPORTATION

County CourthouseFederal CourthouseMunicipal CourthousePost O�cePublic Library

3

5

13

16

17

GOVERNMENT / COMMUNITY

MunicipalCourt Lot

Aluminum Dye-Sub Print Aluminum panel with Dye-Sub Print graphics

M MATERIALS NAME SPECIFICATION PROCESS

M1 Dye-Sub Print

To match Mathews Paint MP18082Brightray Silver Metallic

Page 10: Wayfinding and Signage System - Eugene, OR

Placement GuidelinesB

Page 11: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

B.1

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Placement Guidelines

FIGURE 1 - Parking Directional - Sign Placement GuidelineFIGURE 2 - Parking Identification - Sign Placement Guideline

Unless approved by the Client or its designated agent, all signs shall be installed to the right of the direction of traffic and where sufficient space is available.

(a) Signs shall be located to take advantage of natural terrain, to minimize impacts on scenic environment and to avoid visual conflicts with other signs, trees and lampposts within the City right-of-way.

(b) Signs shall be located so as not to interfere with, obstruct or divert driver’s attention from any other Official Traffic Control Device. Other Official Traffic Control Devices placed at intersection approaches, subsequent to the placement of a Wayfinding Sign, shall have precedence as to location and may require the relocation of the Wayfinding Sign. In the locations where Official Traffic Control Devices are integrated into the Wayfinding Signage System, the Official Traffic Control Devices shall take precedence with regard to order, space and location, over other information.

(c) Wayfinding Signs shall be positioned in such a manner that does not restrict driver’s attention or view when making turns or driving through an intersection. (d) There shall be a goal of one sign per block, although two are permissible, where necessary.

The following pages illustrate installation guidelines for the location and spacing of the various sign types. Figures 1 through 6 represent the guidelines for the location of the various sign types, while Figure 7 illustrates the lateral clearance guidelines.

Figure 1

Sign A: PARK.1-2

Figure 2

Sign B: PARK.1-2

B

B

50 to

100

ft.

50 to

100

ft.

Parking Lot

Entrance

Destination

A

A

Not

less

than

50

ft.N

ot le

ss th

an 2

5 ft.

D

ista

nce

betw

een

2 si

gns

100

to 2

00 ft

.Pr

iorit

y pl

acem

ent

Page 12: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

B.2

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Placement Guidelines

FIGURE 3 - Parking Directional - Sign Placement GuidelineFIGURE 4 - Parking Directional - Sign Placement Guideline

Unless approved by the Client or its designated agent, all signs shall be installed to the right of the direction of traffic and where sufficient space is available.

(a) Signs shall be located to take advantage of natural terrain, to minimize impacts on scenic environment and to avoid visual conflicts with other signs, trees and lampposts within the City right-of-way.

(b) Signs shall be located so as not to interfere with, obstruct or divert driver’s attention from any other Official Traffic Control Device. Other Official Traffic Control Devices placed at intersection approaches, subsequent to the placement of a Wayfinding Sign, shall have precedence as to location and may require the relocation of the Wayfinding Sign. In the locations where Official Traffic Control Devices are integrated into the Wayfinding Signage System, the Official Traffic Control Devices shall take precedence with regard to order, space and location, over other information.

(c) Wayfinding Signs shall be positioned in such a manner that does not restrict driver’s attention or view when making turns or driving through an intersection. (d) There shall be a goal of one sign per block, although two are permissible, where necessary.

The following pages illustrate installation guidelines for the location and spacing of the various sign types. Figures 1 through 6 represent the guidelines for the location of the various sign types, while Figure 7 illustrates the lateral clearance guidelines.

Figure 3

Sign C: PARK.1-2

Figure 4

Sign D: PARK.1-2

D

D

Not

less

than

25

ft.N

ot le

ss th

an 5

0 ft.

D

D

Not

less

than

25

ft.N

ot le

ss th

an 5

0 ft.

C

C

Position Center of Island

Not

less

than

25 ft

.N

ot le

ss th

an 2

5 ft.

100

to 2

00 ft

.

Page 13: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

B.3

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Placement Guidelines

a

c

b

d

e

f

g

h

FIGURE 6 - Lateral Clearance Guidelines

Within some of the Downtown areas of City of Eugene, urban conditions and narrow sidewalks may cause deviation from the standards articulated in the previous figures. Conditions may include less lateral clearance for the 2'-0" or 5'-0" preferred distance from edge of sign panel to curb, or placement at 2'-0" or 5'-0" would create an obstacle (i.e. post positioned in middle of the side walk) or create situations of non-compliance to ADA clearances.

In these cases guidelines must be consistent with MUTCD Section 2A.19 options for urban areas.

Suggested recommendations for relocation of signs if placement is in conflict with guidelines.

OPTION A: Position the sign at a minimum of 2'-0" or 5'-0" (face of curb to edge of sign panel) as required.

OPTION B: If the sign can be moved, without disrupting routing or sequencing, then it should be repositioned to achieve the 2'-0" or 5'-0" min.

If 2'-0" is not physically possible, then the following options should be allowed:

OPTION C: The sign set back should be position at 1'-6". If that is not possible then...

OPTION D: Utilize a minimum 1'- 0", in accordance with MUTCD, only as a final option.

Figure 6

Not to Scale

MEASURE PREFFERED DISTANCE MINIMUM DISTANCESIGN TYPE

aDistance from Edge of Sign Panel toEdge of Curb

2'-0" or more 1' - 0"

b

c

Distance from Sign Post toNearest Obstruction

4' - 0" or more 3' - 0"

Distance from Edge of Sign Panel toNearest Overhead Obstruction

4' - 0" or more 1' - 0"

dSign Placement in Relation to Adjacent Building

align to building Edge Do Not obstruct Entrance

eDistance from Face of Sign toNearest Tree Branch

20' - 0" or more 15' - 0"

fDistance from Face of Sign toNearest Utlity Pole

15' - 0" or more 10' - 0"

gDistance from Back of Sign toNearest Tree Branch

8' - 0" or more 3' - 0"

hDistance from Back of Sign toNearest Utility Pole

15' - 0" or more 10' - 0"

Measurements and Distances shown are guidelines only prevailing local and state codes shall supersede information presented.

Page 14: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

B.4

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Placement Guidelines

FIGURE 7 - Lateral Clearance Guidelines

Within some of the Downtown areas of City of Eugene, urban conditions and narrow sidewalks may cause deviation from the standards articulated in the previous figures. Conditions may include less lateral clearance for the 2'-0" or 5'-0" preferred distance from edge of sign panel to curb, or placement at 2'-0" or 5'-0" would create an obstacle (i.e. post positioned in middle of the side walk) or create situations of non-compliance to ADA clearances.

In these cases guidelines must be consistent with MUTCD Section 2A.19 options for urban areas.

Suggested recommendations for relocation of signs if placement is in conflict with guidelines.

OPTION A: Position the sign at a minimum of 2'-0" or 5'-0" (face of curb to edge of sign panel) as required.

OPTION B: If the sign can be moved, without disrupting routing or sequencing, then it should be repositioned to achieve the 2'-0" or 5'-0" min.

If 2'-0" is not physically possible, then the following options should be allowed:

OPTION C: The sign set back should be position at 1'-6". If that is not possible then...

OPTION D: Utilize a minimum 1'- 0", in accordance with MUTCD, only as a final option.

Example of Sidewalk & City Right of Way (Sidewalk widths vary)

5’-0” 9’-0”

Gutter Curb

AD

A required

3'-0" minim

um

2’-0” typ. to Curb(1’-0” Min.) Sign Panel

Pole/Breakaway

5 Foot Furnishing Zone

Sidewalk Element:Canopy, Bench, Tree-grateStairs, Building Entrance, etc.

Reference View: Example - 5 foot Furnishing Zone / City Right of WaySCALE: Not To Scale

Note: Top View of PARK.1-2 shown as example.

1

NOTE:All locations shall be installed within the City ROW. If during the initial survey it is determined any part of the sign (pole or panel) extends outside of the City’s Right of Way vertical plane and into private property, the installer must notify the city prior to fabrication/installation.

Figure 7

Not to Scale

Page 15: Wayfinding and Signage System - Eugene, OR

Menu of Sign TypesC

Page 16: Wayfinding and Signage System - Eugene, OR

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH

7-5-17

9-21-17

C.1

SPECIFICATIONS

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting

situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a

licensed engineer in the State of the project.

Parking Directional & Lot ID Signage Overview

MENU OF SIGN TYPESParking Directional Parking Lot ID

PARK.1Parking Trailblazer

PARK.1aParking Trailblazer

PARK.2aParking Directional

PARK.1bParking Trailblazer

(Combine w/ existingOne-way sign. New Pole)

PARK.2Parking Directional

PARK.3Parking IDMonument

VINYL.1Door Vinyl

Pedestrian Garage Entrance

WDIR.1Wall Directional

PedestrianParking Access

249 West Broadway

Elevator to all Parking Levels

Stairs up to Parking Level 1

Stairs down to Parking Levels 2 & 3

PUBLIC PARKING

Broadway Place South

Hult CenterParking

NEXT LEFT

Hult CenterParking

NEXT LEFT

MunicipalCourt Lot

PUBLICPARKING

Page 17: Wayfinding and Signage System - Eugene, OR

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH

7-5-17

9-21-17

C.2

SPECIFICATIONS

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting

situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a

licensed engineer in the State of the project.

Exterior Parking Garage Signage Overview

MENU OF SIGN TYPESParking Garage Signage - Exterior

PARK.5Parking Garage IDEntrance / Exit Sign

ENTRANCEEXIT

LED Lighting

PARK.4Parking Garage IDIlluminated Letters

P E A R L S T R E E T G A R A G EP E A R L S T R E E T G A R A G E

PERMIT PARKING

ONLY

EXCEPT AT METERS

8am-5pmMon-Fri

parkeparkeugene.comPARK.7

Parking GarageInformational Sign

PARK.6 or PARK.6aParking Garage IDFlag Mounted Sign

PARK.6 PARK.6a

PUBLICPARKING

PUBLICPARKING

Page 18: Wayfinding and Signage System - Eugene, OR

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH

7-5-17

9-21-17

C.3

SPECIFICATIONS

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting

situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a

licensed engineer in the State of the project.

Interior Parking Garage Sign Overview

MENU OF SIGN TYPESInterior Parking Garage Signs

3NORTH

ELEVATORIS OUT

parkeparkeugene.com

PLEASE USE SOUTH OR EAST ELEVATORS

3NORTH STAIRExit to 10th Ave

EXIT

Exit to 10th AveNORTH STAIR

PERMITPARKING

ONLY7AM-6PMMON-FRI

PARK

RATES

PAYHERE

LEVELS2,3,4

PERMITPARKING

ONLY

Exit to 10th AveNORTH ELEVATOR

ATTENTION

11”x17”Insert

11”x17”Insert

COLUMN.1Level ID

Column Wrap

OVD.1Overhead Vehicular

Directional

INFO.1Garage Info

ELEVATOR.1Elevator ID

SPACE.1Parking Space ID

TEMP.1Temporary Sign

RULES.1Garage Rules

STAIR.1Overhead Stairwell ID

STAIR.2Stairwell ID

Wall or Column

METER.1“Pay Here”

METER.2Parking Rates

Page 19: Wayfinding and Signage System - Eugene, OR

Design Intent DrawingsDS

V8 9

Specification Note

Color Designator

The Color Designator Chart is found in theGraphic Standards section.

The Specification Notation is found on thesame page as the drawings.

KEY:

Page 20: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.1

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type PARK.1 Parking Trailblazer

Parking TrailblazerPARK.1

1. 4x4 SQUARE POST MATERIAL: 4"x4"x.25" Square Aluminum Post. FABRICATION PROCESS: Extruded EDGES: Smooth COLOR: Custom, as noted SURFACE PROCESS: Paint all exposed surfaces

with Matthews Acrylic Polyurethane, with clear coat satin finish.

FOOTER: Transpo Breakaway. As per ODOT Specs.

2. MOUNTING BRACKET MATERIAL: 3/16" thick Aluminum U-Channel FABRICATION PROCESS: Extruded EDGES: Square, Smooth COLOR: custom, as noted SURFACE PROCESS: Paint all exposed surfaces

with Matthews Acrylic Polyurethane, with clear coat satin finish.

FASTENER: Tamper-resistant mechanically fastened to Post.

3. 1/4" SIGN PANEL FRONT - REFLECTIVE MATERIAL: 1/4" thick Aluminum sheet FABRICATION PROCESS: Router Cut EDGES: Smooth COLOR: custom, as noted GRAPHIC BACKGROUND AND COPY PROCESS:

3M custom inks print direct to 3930 with 3M approved UV/Graffiti Vinyl Over-laminate. (See Color Sheet for all color and material specifications)

FASTENER: Press-roll per 3M requirements. Weld back of panel to mounting bracket.

EDGE DETAIL: Paint all edges and back with Matthews Acrylic Polyurethane, with clear coat satin finish.

50. BREAKAWAY FOOTER FOOTER: Transpo® Break-Safe AS4 break-away

support system, as per ODOT break-away specs.

Side View

Top View

Back ViewFront View: PARK.1SCALE: 1/2" = 1'-0"1

Graphic Layout: PARK.1SCALE: 1 1/2" = 1'-0"2

F.11

R2 3

R1 3

R1 3

P2 2 P2 2

R4 3

P11 1

P11 50

10'-6"

1'-6"

4" 1'-2"CL

2'-7"

7'-6"

2'-0" Min

2'-7"

1'-6"

1'-1"

CL

C LC L7 1/4"

1'-6"

Ø 1'-2"

Ø 1'-0 1/4"

Page 21: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.2

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type PARK.1a Parking Trailblazer

Parking TrailblazerPARK.1a

4. POLE STRAP ATTACHMENT PRODUCT: Band-It Band, or approved equal. MATERIAL: Type 201 SS SIZE: 3/4 inch COLOR: To Match Pole existing color. Utlize

Color-It ® Polyester Coating FASTENER: Universal Channel Clamp-SignFix

SX0220 NOTE: Sign Contractor to coordinate the

removal or movement of interfering existing signs on utility poles, with the city.

2. MOUNTING BRACKET MATERIAL: 3/16" thick Aluminum U-Channel FABRICATION PROCESS: Extruded EDGES: Square, Smooth COLOR: custom, as noted SURFACE PROCESS: Paint all exposed surfaces

with Matthews Acrylic Polyurethane, with clear coat satin finish.

FASTENER: Weld to back of Sign Panel. SS strap-mounted to utility pole.

6. 1/8" SIGN PANEL FRONT - REFLECTIVE MATERIAL: 1/8" thick Aluminum sheet FABRICATION PROCESS: Router Cut EDGES: Smooth COLOR: custom, as noted GRAPHIC BACKGROUND AND COPY PROCESS:

3M custom inks print direct to 3930 with 3M approved UV/Graffiti Vinyl Over-laminate. (See Color Sheet for all color and material specifications)

FASTENER: Press-roll per 3M requirements. Weld back of panel to mounting bracket.

EDGE DETAIL: Paint all edges and back with Matthews Acrylic Polyurethane, with clear coat satin finish.

Side View Back ViewFront View: PARK.1aSCALE: 1/2" = 1'-0"1

Top View: PARK.1aSCALE: NTS2

4"

1 1/

2"

Weld Panel to bracket

Graphic Layout: PARK.1SCALE: 1 1/2" = 1'-0"2

2'-7"

1'-6"

1'-1"

CL

C LC L7 1/4"

1'-6"

Ø 1'-2"

Ø 1'-0 1/4"

R2 6 P11 4

P2 2

P2 6R1 6

R4 6

Existing PostFabricator must verify posts are structurallyengineered to hold sign panels.

1'-6"

2'-7"

7'-6"

Page 22: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.3

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Side View

Top View

Back ViewFront View: PARK.1bSCALE: 1/2" = 1'-0"1

Graphic Layout: PARK.1bSCALE: 1 1/2" = 1'-0"2

F.13

C L

CL

R2 3

R1 3P2 3

R4 3

P11 1

P11 50

2'-0" Min

1'-0"

1'-6"

7'-6"

10'-6"

3'-0"

Re-Use Existing One Way SignsReplace location w/ new sign

7 1/4"

Ø 1'-2"Ø 1'-0 1/4"

1'-4" 1'-8"

Sign Type PARK.1b Parking Trailblazer

Parking TrailblazerPARK.1b

1. 4x4 SQUARE POST MATERIAL: 4"x4"x.25" Square Aluminum Post. FABRICATION PROCESS: Extruded EDGES: Smooth COLOR: Custom, as noted SURFACE PROCESS: Paint all exposed surfaces

with Matthews Acrylic Polyurethane, with clear coat satin finish.

FOOTER: Transpo Breakaway. As per ODOT Specs.

3. 1/4" SIGN PANEL FRONT - REFLECTIVE MATERIAL: 1/4" thick Aluminum sheet FABRICATION PROCESS: Router Cut EDGES: Smooth COLOR: custom, as noted GRAPHIC BACKGROUND AND COPY PROCESS:

3M custom inks print direct to 3930 with 3M approved UV/Graffiti Vinyl Over-laminate. (See Color Sheet for all color and material specifications)

FASTENER: Press-roll per 3M requirements. Mechanically fasten to sign post. EDGE DETAIL: Paint all edges and back with Matthews Acrylic Polyurethane, with clear coat satin finish.

50. BREAKAWAY FOOTER FOOTER: Transpo® Break-Safe AS4 break-away

support system, as per ODOT break-away specs.

Page 23: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.4

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type PARK.2 Parking Trailblazer

Parking TrailblazerPARK.2

1. 4x4 SQUARE POST MATERIAL: 4"x4"x.25" Square Aluminum Post. FABRICATION PROCESS: Extruded EDGES: Smooth COLOR: Custom, as noted SURFACE PROCESS: Paint all exposed surfaces

with Matthews Acrylic Polyurethane, with clear coat satin finish.

FOOTER: Transpo Breakaway. As per ODOT Specs.

2. MOUNTING BRACKET MATERIAL: 3/16" thick Aluminum U-Channel FABRICATION PROCESS: Extruded EDGES: Square, Smooth COLOR: custom, as noted SURFACE PROCESS: Paint all exposed surfaces

with Matthews Acrylic Polyurethane, with clear coat satin finish.

FASTENER: Tamper-resistant mechanically fastened to Post.

3. 1/4" SIGN PANEL FRONT - REFLECTIVE MATERIAL: 1/4" thick Aluminum sheet FABRICATION PROCESS: Router Cut EDGES: Smooth COLOR: custom, as noted GRAPHIC BACKGROUND AND COPY PROCESS:

3M custom inks print direct to 3930 with 3M approved UV/Graffiti Vinyl Over-laminate. (See Color Sheet for all color and material specifications)

FASTENER: Press-roll per 3M requirements. Weld back of panel to mounting bracket.

EDGE DETAIL: Paint all edges and back with Matthews Acrylic Polyurethane, with clear coat satin finish.

50. BREAKAWAY FOOTER FOOTER: Transpo® Break-Safe AS4 break-away

support system, as per ODOT break-away specs.

Side View

Top View

Back ViewFront View: PARK.2SCALE: 1/2" = 1'-0"1

Hult CenterParking

NEXT LEFT

F.11

P2 2

P2 3

R2 3

R1 3

R4 3

P11 1

P11 50

2'-0" Min

3'-2"

7'-6"

2'-3"

11'-1"

4" 1'-11"

Page 24: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.5

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type PARK.2a Parking Trailblazer

Parking TrailblazerPARK.2a

4. POLE STRAP ATTACHMENT PRODUCT: Band-It Band, or approved equal. MATERIAL: Type 201 SS SIZE: 3/4 inch COLOR: To Match Pole existing color. Utlize

Color-It ® Polyester Coating FASTENER: Universal Channel Clamp-SignFix

SX0220 NOTE: Sign Contractor to coordinate the

removal or movement of interfering existing signs on utility poles, with the city.

2. MOUNTING BRACKET MATERIAL: 3/16" thick Aluminum U-Channel FABRICATION PROCESS: Extruded EDGES: Square, Smooth COLOR: custom, as noted SURFACE PROCESS: Paint all exposed surfaces

with Matthews Acrylic Polyurethane, with clear coat satin finish.

FASTENER: Weld to back of Sign Panel. SS strap-mounted to utility pole.

6. 1/8" SIGN PANEL FRONT - REFLECTIVE MATERIAL: 1/8" thick Aluminum sheet FABRICATION PROCESS: Router Cut EDGES: Smooth COLOR: custom, as noted GRAPHIC BACKGROUND AND COPY PROCESS:

3M custom inks print direct to 3930 with 3M approved UV/Graffiti Vinyl Over-laminate. (See Color Sheet for all color and material specifications)

FASTENER: Press-roll per 3M requirements. Weld back of panel to mounting bracket.

EDGE DETAIL: Paint all edges and back with Matthews Acrylic Polyurethane, with clear coat satin finish.

Side View Back ViewFront View: PARK.2aSCALE: 1/2" = 1'-0"1

Hult CenterParking

NEXT LEFT

Top View: PARK.2aSCALE: NTS2

4"

1 1/

2"

Weld Panel to bracket

Existing PostFabricator must verify posts are structurallyengineered to hold sign panels.

R2 6P11 4

P2 2 P2 6

R1 6

R4 6

2'-3"

3'-2"

7'-6"

Page 25: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.6

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type PARK.3 Parking Lot ID

Parking Lot IDPARK.3

3. 1/4" SIGN PANEL FRONT - REFLECTIVE MATERIAL: 1/4" thick Aluminum sheet FABRICATION PROCESS: Router Cut EDGES: Smooth COLOR: custom, as noted GRAPHIC BACKGROUND AND COPY PROCESS:

3M custom inks print direct to 3930 with 3M approved UV/Graffiti Vinyl Over-laminate. (See Color Sheet for all color and material specifications)

FASTENER: Press-roll per 3M requirements. Mechanically fasten to sign cabinet.

EDGE DETAIL: Paint all edges and back with Matthews Acrylic Polyurethane, with clear coat satin finish.

5. SIGN CABINET MATERIAL: Aluminum extrusion and sheet FABRICATION PROCESS: Extruded framing / Fabricated, with hidden fasteners. EDGES: Square, Smooth COLOR: Custom, as noted

FACE: GRAPHIC BACKGROUND AND COPY PROCESS: 3M custom inks print direct to 3930 with 3M approved UV/Graffiti Vinyl Over-laminate. (See Color Sheet for all color and material specifications) Press-roll per 3M requirements.

SURFACE PROCESS: Paint all exposed surfaces with Matthews Acrylic Polyurethane, with clear coat satin finish.

FASTENERS: Cabinet mechanically fastened to internal support, attaches to footer.

7. PARKING SYMBOL MATERIAL: 1" deep Aluminum Reverse channel

symbol FABRICATION PROCESS: Router Cut. EDGES: Square, Smooth SURFACE PROCESS: Paint all exposed surfaces

with Matthews Acrylic Polyurethane, with clear coat satin finish.

FASTENER: Pin-mount flush to cabinet surface.

Side View

Top View

Back ViewFront View: PARK.3SCALE: 1/2" = 1'-0"1

MunicipalCourt Lot

PUBLICPARKING

MunicipalCourt Lot

PUBLICPARKING

F.12

P2 5

P1 7

R4 3

R1 3

R3 3

2'-3"

8'-4"

1'-8"

5'-3"

2'-0 1/2"5"Ø 1'-3"

Page 26: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.7

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type WDIR.1 Pedestrian Wall Directional

Wall DirectionalWDIR.1

8. GRAPHIC PANEL MATERIAL: 1/4" thk. alum. panel

FABRICATION PROCESS: Router Cut EDGES: Square, Smooth SURFACE PRINT PROCESS: Zero VOC Powdercoat

Primer w/ Water Based Custom Dye Sublimated Ink Transfer Print on Face + Back of Panel Clear UV-Resistant, Anti-Graffiti Powdercoat Topcoat, Matte/Satin Finish (Per Manufacturer Capabilities

FASTENER: Pin-mount to wall/ column with tamper-resistant hardware. If located on Brick: Locate holes in grout lines.

Conditions vary by location. Fabricator to verify all measurements and mounting conditions in field.

Side ViewFront View: WDIR.1SCALE: 1/2" = 1'-0"1

PedestrianParking Access

2'-3"

1/4"

Section: WDIR.1SCALE: 1 1/2" = 1'-0"2

M1 8

1'-5"

2'-3"

4'-11"

Page 27: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.8

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type VINYL.1 Door Vinyl

Door VinylVINYL.1

Front View: VINYL.1SCALE: 1/2" = 1'-0"1

Front View: VINYL.1SCALE: 1 1/2" = 1'-0"2

249 West Broadway

Elevator to all Parking Levels

Stairs up to Parking Level 1

Stairs down to Parking Levels 2 & 3

PUBLIC PARKING

Broadway Place South

*MUST VERIFY DIMNESIONS OF OPENING IN FIELD

Elevator to all Parking Levels

Stairs up to Parking Level 1

Stairs down to Parking Levels 2 & 3

PUBLIC PARKING

Broadway Place South

V3 9

V1 9

3'-9"Fabricator to

VIF in Field

2'-5"Fabricator to

VIF in Field

6"

1 1/4"1 1/2"3/4"

1 1/2"1"1"

4 1/4"

1"1/2"

1 1/4"

3/4"1 1/2"3/4"

1"

3/4"1 1/4"

9. VINYL ON GLASS MATERIAL: 3M Exterior grade Opaque Vinyl COLOR: as noted FASTENER: Adhere to face of glass per 3M

specifications

FABRICATOR MUST TAKE MEASUREMENTS OF EACH ENTRY SITE PRIOR TO ORDERING MATERIALS.

Page 28: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.9

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type PARK.4 Parking Garage ID Illuminated Letters

Parking Garage IDPARK.4

Front View: PARK.4SCALE: 1/4" = 1'-0"1

P E A R L S T R E E T G A R A G E

H U L T G A R A G E

B R O A D W A Y S O U T H G A R A G E

B R O A D W A Y N O R T H G A R A G E

O V E R P A R K G A R A G E

P A R C A D E

P A R C A D E G A R A G E

– 10

10"

10"

10"

10"

1'-0"

1'-6"

1'-6"

10. PIN-MOUNT LETTERS - FACE LIT MATERIAL: 2" thk Reverse channel individual

letters, painted silver on sides. LED white lights. (4000K exterior LEDs)

PRODUCT: BitroGroup Resno Face Lit Letters RS-AC-F2 (Or approved equal)

EDGES: Smooth SURFACE PROCESS: Paint all exposed surfaces

with Matthews Acrylic Polyurethane, with clear coat satin finish.

FASTENER: Pin-mount to garage facade.

NOTE: Conditions Vary per location. Fabricator to field verify prior to fabrication.

Page 29: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.10

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type PARK.5 Exit/Entrance

Parking Garage

Exit/EntrancePARK.5

Front View: PARK.5SCALE: 1/4" = 1'-0"1

ENTRANCE

EXIT

1'-2"

1/2"

1'-2"

1/2"

Section Details: PARK.5SCALE: 1" = 1'-0"2

1. Flat Mount: Brick 2. Flat Mount: Concrete 3. Floating : Side View 4. Floating : Top View

MOUNTING EXAMPLES

1'-2" 9" 8"

1'-2" 8"

Varies Per LocationFabricator Must Verify in Field

Varies Per LocationFabricator Must Verify in Field

R1 11

R4 11

R1 11

R2 11

11. 1/2" SIGN PANEL FRONT - REFLECTIVE MATERIAL: 1/2" thick Aluminum sheet FABRICATION PROCESS: Router Cut EDGES: Smooth COLOR: custom, as noted GRAPHIC BACKGROUND AND COPY PROCESS:

3M custom inks print direct to 3930 with 3M approved UV/Graffiti Vinyl Over-laminate. (See Color Sheet for all color and material specifications)

FASTENER: Press-roll per 3M requirements. Mechanically Fasten to Parking Garage Structure. Varies per location.

EDGE DETAIL: Paint all edges with Matthews Acrylic Polyurethane, with clear coat satin finish.

Page 30: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.11

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type PARK.6 Parking Garage ID

Flag Sign

Parking Garage IDPARK.6

12. SIGN STRUCTURE Material: Aluminum Process: Fabricated/ Welded H type construction Surface Process: Paint as indicated Color: As indicated in Color Chart Internal Bracing: As reqd. by sign manufacturers Structural engineer. Fabricators drawings are to

be signed and sealed by a certified State of OR licensed Structural Engineer.

SIGN FACE Sign Panel: Flexible Face Clip Mounting System Vinyl: 3M Scotchcal Translucent Graphic Film as

specified Diffuser: 3M Diffuser Film as specified Substrate: 3M Panaflex 945 as specified Color: As indicated in Color Chart INTERNAL LED LIGHT FIXTURE Lighting Process: Internal Face Lit Manufacturer: Sylvania LED #OSDC36w2-865- Exterior or approved equal. Color: White Fasten: Mount to inside of Logo, provide rear

baffle at rear with second row of LEDs.

INTERNAL LED HOUSING Material: Aluminum Process: Fabricated/ Welded H type construction Surface Process: Paint as indicated Color: As indicated in Color Chart Internal Bracing: As reqd. by sign manufacturers Structural engineer. Fabricators drawings are

to be signed and sealed by a certified State of Pennsylvania licensed Structural Engineer.

HARDWARE MOUNTING METHOD: Mechanically Fasten MATERIAL: Stainless Steel TYPE: Screw with threaded anchor insert. SIZE: as determined by Fabricator MOUNTING SURFACE: Concrete or Brick VIF

Conditions vary by location. Fabricator to verify all measurements and mounting conditions in field.

Side View

PUBLICPARKING

Front View: PARK.6SCALE: 1/2" = 1'-0"1

Reco

mm

end 1

2' –

14'-0

" abo

ve St

reet

or Si

dewa

lk

P5 12

P3 12

P4 12

V5 12

Section View: PARK.6SCALE: 1 1/2" = 1'-0"4

Detail: PARK.6SCALE: NTS3

Electrical thru-hole

2'-5"

2'-5"

1'-6"

3'-11"

2'-5" 6"

5"

Page 31: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.12

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type PARK.6a Parking Garage ID

Flag Sign

Parking Garage IDPARK.6a

12. SIGN STRUCTURE Material: Aluminum Process: Fabricated/ Welded H type construction Surface Process: Paint as indicated Color: As indicated in Color Chart Internal Bracing: As reqd. by sign manufacturers Structural engineer. Fabricators drawings are to

be signed and sealed by a certified State of OR licensed Structural Engineer.

SIGN FACE Sign Panel: Flexible Face Clip Mounting System Vinyl: 3M Scotchcal Translucent Graphic Film as

specified Diffuser: 3M Diffuser Film as specified Substrate: 3M Panaflex 945 as specified Color: As indicated in Color Chart INTERNAL LED LIGHT FIXTURE Lighting Process: Internal Face Lit Manufacturer: Sylvania LED #OSDC36w2-865- Exterior or approved equal. Color: White Fasten: Mount to inside of Logo, provide rear

baffle at rear with second row of LEDs.

INTERNAL LED HOUSING Material: Aluminum Process: Fabricated/ Welded H type construction Surface Process: Paint as indicated Color: As indicated in Color Chart Internal Bracing: As reqd. by sign manufacturers Structural engineer. Fabricators drawings are

to be signed and sealed by a certified State of Pennsylvania licensed Structural Engineer.

HARDWARE MOUNTING METHOD: Mechanically Fasten MATERIAL: Stainless Steel TYPE: Screw with threaded anchor insert. SIZE: as determined by Fabricator MOUNTING SURFACE: Concrete or Brick VIF

Conditions vary by location. Fabricator to verify all measurements and mounting conditions in field.

Side View

PUBLICPARKING

Front View: PARK.6aSCALE: 1/2" = 1'-0"1

Reco

mm

end 1

2' –

14'-0

" abo

ve St

reet

or Si

dewa

lk

P5 12

P3 12

P4 12

V5 12

Section View: PARK.6aSCALE: 1 1/2" = 1'-0"4

Detail: PARK.6aSCALE: NTS3

Electrical thru-hole

3'-0"

3'-0"

1'-10"

4'-10"

3'-0" 6"

5"

Page 32: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.13

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type PARK.7 Garage Info

Garage InfoPARK.7

FREE PARKINGSATURDAY & SUNDAY

Except Event Parking

parkeparkeugene.com

Side ViewFront View: PARK.7SCALE: 1/2" = 1'-0"1

3'-0"

1/4"

Section: PARK.7SCALE: 1" = 1'-0"2

P3 13

P2 13

P4 13

P1 133'-0"

4'-11"

2'-5"

Final text TBDby client

13. SIGN PANEL - DIGITAL PRINT MATERIAL: 1/4" thk Aluminum sheet FABRICATION PROCESS: Router Cut EDGES: Smooth COLOR: custom, as noted SURFACE PROCESS: Paint all exposed surfaces

with Matthews Acrylic Polyurethane, with clear coat satin finish.

GRAPHIC BACKGROUND AND COPY PROCESS: 3M custom inks print direct to Scotchcal ® #3690 with 3M approved UV/Graffiti Vinyl Overlaminate. (See Color Sheet for all color and material specifications)

FASTENER: Pin-mount to wall/ column with tamper-resistant hardware. If located on Brick: Locate holes in grout lines.

Conditions vary by location. Fabricator to ≠verify all measurements and mounting conditions in field.

Page 33: Wayfinding and Signage System - Eugene, OR

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH

7-5-17

9-21-17

D.14

SPECIFICATIONS

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting

situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a

licensed engineer in the State of the project.

Broadway North Garage Entrance

LED LightingPARK.5Parking Garage IDEntrance / Exit Sign

PARK.4Parking Garage IDIlluminated Letters

ENTRANCEEXIT

B R O A D W A Y N O R T H G A R A G EB R O A D W A Y N O R T H G A R A G E

FREE PARKINGSATURDAY & SUNDAY

Except Event Parking

parkeparkeugene.com

PARK.6Parking Garage ID

Flag Mounted Sign

PARK.7Parking Garage

Informational Sign

Front View: Broadway North EntranceSCALE: 3/8" = 1'-0"1

12'-9" VIF 12'-9" VIF

*Fabricator MUST verify all measurements in �eld prior to fabrication

Remove existing signs: 1. Garage Name Letters2. Garage Info3. Flag mounted sign

Re-surface garage where needed prior to installation of new signs. (Patch/Paint)

Measurements given as an estimate only. The fabricator MUST verify all measurements for signs in field prior to fabrication.

1

23

MunicipalCourt Lot

HultGarage

ParcadeGarage

Federal Court Lot

BroadwayNorth

Garage

BroadwaySouth

Garage

OverparkGarage

Pearl StGarage

AmtrakLot

EXIT -3

EXITENTRY -1

ENTRY - 2ENTRY - 4

EXITENTRY -1

ENTRY -2

PublicLibrary

McDonaldTheater

ActorsCabaret

LCCDowntown

OregonContemporary

Theatre

The JazzStation

VisitorCenter

Paci�cUniversity

WOWHall

SheddInstitute

GreyhoundBus Depot

Park Blocks

DefazioPed/Bike

Bridge

Lane TransitDistrict

HultCenter

PostO�ce

CountyCourthouse

MunicipalCourthouse

FederalCourthouse

Train Depot

Shelton McMurpheyJohnson House

Garage Plan View

Page 34: Wayfinding and Signage System - Eugene, OR

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH

7-5-17

9-21-17

D.15

SPECIFICATIONS

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting

situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a

licensed engineer in the State of the project.

Broadway South Garage Entrance

LED LightingPARK.5Parking Garage IDEntrance / Exit Sign

PARK.4Parking Garage IDIlluminated Letters

ENTRANCEEXIT

B R O A D W A Y S O U T H G A R A G EB R O A D W A Y S O U T H G A R A G E

FREE PARKINGSATURDAY & SUNDAY

Except Event Parking

parkeparkeugene.com

PARK.6Parking Garage ID

Flag Mounted Sign

PARK.7Parking Garage

Informational Sign

Front View: Broadway South EntranceSCALE: 3/8" = 1'-0"1

12'-9" VIF 12'-9" VIF

*Fabricator MUST verify all measurements in �eld prior to fabrication

1

23

MunicipalCourt Lot

HultGarage

ParcadeGarage

Federal Court Lot

BroadwayNorth

Garage

BroadwaySouth

Garage

OverparkGarage

Pearl StGarage

AmtrakLot

EXIT -3

EXITENTRY -1

ENTRY - 2ENTRY - 4

EXITENTRY -1

ENTRY -2

PublicLibrary

McDonaldTheater

ActorsCabaret

LCCDowntown

OregonContemporary

Theatre

The JazzStation

VisitorCenter

Paci�cUniversity

WOWHall

SheddInstitute

GreyhoundBus Depot

Park Blocks

DefazioPed/Bike

Bridge

Lane TransitDistrict

HultCenter

PostO�ce

CountyCourthouse

MunicipalCourthouse

FederalCourthouse

Train Depot

Shelton McMurpheyJohnson House

Garage Plan View

Remove existing signs: 1. Garage Name Letters2. Garage Info3. Flag mounted sign

Re-surface garage where needed prior to installation of new signs. (Patch/Paint)

Measurements given as an estimate only. The fabricator MUST verify all measurements for signs in field prior to fabrication.

Page 35: Wayfinding and Signage System - Eugene, OR

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH

7-5-17

9-21-17

D.16

SPECIFICATIONS

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting

situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a

licensed engineer in the State of the project.

Hult Garage Entrance 1

H U L T G A R A G EH U L T G A R A G E

ENTRANCE

PARK.4Parking Garage IDIlluminated Letters

LED LightingPARK.5Parking Garage IDEntrance / Exit Sign

EXIT

FREE PARKINGSATURDAY & SUNDAY

Except Event Parking

parkeparkeugene.com

PARK.7Parking GarageInformational Sign

PARK.6aParking Garage ID

Flag Mounted Sign

Front View: Hult Garage- Entrance 1SCALE: 3/8" = 1'-0"1

*Fabricator MUST verify all measurements in �eld prior to fabrication

1'-2"

14'-8 1/4" VIF 14'-8 1/4" VIF

10"

1

4

3

2

1

MunicipalCourt Lot

HultGarage

ParcadeGarage

Federal Court Lot

BroadwayNorth

Garage

BroadwaySouth

Garage

OverparkGarage

Pearl StGarage

AmtrakLot

EXIT -3

EXITENTRY -1

ENTRY - 2ENTRY - 4

EXITENTRY -1

ENTRY -2

PublicLibrary

McDonaldTheater

ActorsCabaret

LCCDowntown

OregonContemporary

Theatre

The JazzStation

VisitorCenter

Paci�cUniversity

WOWHall

SheddInstitute

GreyhoundBus Depot

Park Blocks

DefazioPed/Bike

Bridge

Lane TransitDistrict

HultCenter

PostO�ce

CountyCourthouse

MunicipalCourthouse

FederalCourthouse

Train Depot

Shelton McMurpheyJohnson House

Garage Plan View

Remove existing signs: 1. Entrance/ Exit signs2. Flag mounted sign3. Exit/ Entrance Signs4. Garage Info

Re-surface garage where needed prior to installation of new signs. (Patch/Paint)

Measurements given as an estimate only. The fabricator MUST verify all measurements for signs in field prior to fabrication.

Page 36: Wayfinding and Signage System - Eugene, OR

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH

7-5-17

9-21-17

D.17

SPECIFICATIONS

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting

situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a

licensed engineer in the State of the project.

Hult Garage Entrance 2

H U L T G A R A G EH U L T G A R A G E

ENTRANCE

PARK.4Parking Garage IDIlluminated Letters

PARK.6aParking Garage IDFlag Mounted Sign

LED Lighting

PARK.5Parking Garage ID - Entrance Sign

Front View: Hult Garage- Entrance 2SCALE: 3/8" = 1'-0"1

*Fabricator MUST verify all measurements in �eld prior to fabrication

11'-6" - VIF

2

1

MunicipalCourt Lot

HultGarage

ParcadeGarage

Federal Court Lot

BroadwayNorth

Garage

BroadwaySouth

Garage

OverparkGarage

Pearl StGarage

AmtrakLot

EXIT -3

EXITENTRY -1

ENTRY - 2ENTRY - 4

EXITENTRY -1

ENTRY -2

PublicLibrary

McDonaldTheater

ActorsCabaret

LCCDowntown

OregonContemporary

Theatre

The JazzStation

VisitorCenter

Paci�cUniversity

WOWHall

SheddInstitute

GreyhoundBus Depot

Park Blocks

DefazioPed/Bike

Bridge

Lane TransitDistrict

HultCenter

PostO�ce

CountyCourthouse

MunicipalCourthouse

FederalCourthouse

Train Depot

Shelton McMurpheyJohnson House

Garage Plan View

Remove existing signs: 1. Entrance Sign2. Flag mounted sign

Re-surface garage where needed prior to installation of new signs. (Patch/Paint)

Measurements given as an estimate only. The fabricator MUST verify all measurements for signs in field prior to fabrication.

Page 37: Wayfinding and Signage System - Eugene, OR

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH

7-5-17

9-21-17

D.18

SPECIFICATIONS

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting

situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a

licensed engineer in the State of the project.

Hult Garage Entrance 3

PARK.5Parking Garage ID - Exit Sign

EXIT

Front View: Hult Garage- Entrance 3SCALE: 3/8" = 1'-0"1

*Fabricator MUST verify all measurements in �eld prior to fabrication

12'-3" VIF

1'-2"

MunicipalCourt Lot

HultGarage

ParcadeGarage

Federal Court Lot

BroadwayNorth

Garage

BroadwaySouth

Garage

OverparkGarage

Pearl StGarage

AmtrakLot

EXIT -3

EXITENTRY -1

ENTRY - 2ENTRY - 4

EXITENTRY -1

ENTRY -2

PublicLibrary

McDonaldTheater

ActorsCabaret

LCCDowntown

OregonContemporary

Theatre

The JazzStation

VisitorCenter

Paci�cUniversity

WOWHall

SheddInstitute

GreyhoundBus Depot

Park Blocks

DefazioPed/Bike

Bridge

Lane TransitDistrict

HultCenter

PostO�ce

CountyCourthouse

MunicipalCourthouse

FederalCourthouse

Train Depot

Shelton McMurpheyJohnson House

Garage Plan View

Page 38: Wayfinding and Signage System - Eugene, OR

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH

7-5-17

9-21-17

D.19

SPECIFICATIONS

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting

situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a

licensed engineer in the State of the project.

Hult Garage Entrance 4

H U L T G A R A G EH U L T G A R A G E

ENTRANCE

PARK.4Parking Garage IDIlluminated Letters

PERMIT PARKING

ONLY

EXCEPT AT METERS

8am-5pmMon-Fri

parkeparkeugene.com

LED Lighting

PARK.5Parking Garage ID - Entrance Sign

PARK.7Parking GarageInformational Sign

PARK.6aParking Garage IDFlag Mounted Sign

Front View: Hult Garage- Entrance 4SCALE: 3/8" = 1'-0"1

*Fabricator MUST verify all measurements in �eld prior to fabrication

1'-2"

10'-0" VIF

1

2

MunicipalCourt Lot

HultGarage

ParcadeGarage

Federal Court Lot

BroadwayNorth

Garage

BroadwaySouth

Garage

OverparkGarage

Pearl StGarage

AmtrakLot

EXIT -3

EXITENTRY -1

ENTRY - 2ENTRY - 4

EXITENTRY -1

ENTRY -2

PublicLibrary

McDonaldTheater

ActorsCabaret

LCCDowntown

OregonContemporary

Theatre

The JazzStation

VisitorCenter

Paci�cUniversity

WOWHall

SheddInstitute

GreyhoundBus Depot

Park Blocks

DefazioPed/Bike

Bridge

Lane TransitDistrict

HultCenter

PostO�ce

CountyCourthouse

MunicipalCourthouse

FederalCourthouse

Train Depot

Shelton McMurpheyJohnson House

Garage Plan View

Remove existing signs: 1. Any Banner Signs2. Post Mounted Entrance sign

Re-surface garage where needed prior to installation of new signs. (Patch/Paint)

Measurements given as an estimate only. The fabricator MUST verify all measurements for signs in field prior to fabrication.

Page 39: Wayfinding and Signage System - Eugene, OR

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH

7-5-17

9-21-17

D.20

SPECIFICATIONS

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting

situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a

licensed engineer in the State of the project.

Overpark Entrance

CLEARANCE 7’-0” CLEARANCE 7’-0”

O V E R P A R K G A R A G EO V E R P A R K G A R A G E

ENTRANCE ENTRANCE

LED LightingPARK.5Parking Garage IDEntrance / Exit Sign

PARK.4Parking Garage IDIlluminated Letters

FREE PARKINGSATURDAY & SUNDAY

Except Event Parking

parkeparkeugene.com

PARK.6aParking Garage IDFlag Mounted Sign

PARK.7Parking GarageInformational Sign

Front View: Overpark EntranceSCALE: 1/4" = 1'-0"1

*Fabricator MUST verify all measurements in �eld prior to fabrication

1'-2"

17'-0" VIF 17'-0" VIF

Remove existing signs: 1. Flag mounted sign2. Entrance Signs

Re-surface garage where needed prior to installation of new signs. (Patch/Paint)

Measurements given as an estimate only. The fabricator MUST verify all measurements for signs in field prior to fabrication.

1

2

MunicipalCourt Lot

HultGarage

ParcadeGarage

Federal Court Lot

BroadwayNorth

Garage

BroadwaySouth

Garage

OverparkGarage

Pearl StGarage

AmtrakLot

EXIT -3

EXITENTRY -1

ENTRY - 2ENTRY - 4

EXITENTRY -1

ENTRY -2

PublicLibrary

McDonaldTheater

ActorsCabaret

LCCDowntown

OregonContemporary

Theatre

The JazzStation

VisitorCenter

Paci�cUniversity

WOWHall

SheddInstitute

GreyhoundBus Depot

Park Blocks

DefazioPed/Bike

Bridge

Lane TransitDistrict

HultCenter

PostO�ce

CountyCourthouse

MunicipalCourthouse

FederalCourthouse

Train Depot

Shelton McMurpheyJohnson House

Garage Plan View

Page 40: Wayfinding and Signage System - Eugene, OR

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH

7-5-17

9-21-17

D.21

SPECIFICATIONS

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting

situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a

licensed engineer in the State of the project.

Overpark Exit

LED LightingPARK.5Parking Garage IDEntrance / Exit Sign

EXIT EXIT

Front View: Overpark ExitSCALE: 1/4" = 1'-0"1

*Fabricator MUST verify all measurements in �eld prior to fabrication

17'-0" VIF 17'-0" VIF

1'-2"

Remove existing signs: 1. Exit signs

Re-surface garage where needed prior to installation of new signs. (Patch/Paint)

Measurements given as an estimate only. The fabricator MUST verify all measurements for signs in field prior to fabrication.

1 1

MunicipalCourt Lot

HultGarage

ParcadeGarage

Federal Court Lot

BroadwayNorth

Garage

BroadwaySouth

Garage

OverparkGarage

Pearl StGarage

AmtrakLot

EXIT -3

EXITENTRY -1

ENTRY - 2ENTRY - 4

EXITENTRY -1

ENTRY -2

PublicLibrary

McDonaldTheater

ActorsCabaret

LCCDowntown

OregonContemporary

Theatre

The JazzStation

VisitorCenter

Paci�cUniversity

WOWHall

SheddInstitute

GreyhoundBus Depot

Park Blocks

DefazioPed/Bike

Bridge

Lane TransitDistrict

HultCenter

PostO�ce

CountyCourthouse

MunicipalCourthouse

FederalCourthouse

Train Depot

Shelton McMurpheyJohnson House

Garage Plan View

Page 41: Wayfinding and Signage System - Eugene, OR

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH

7-5-17

9-21-17

D.22

SPECIFICATIONS

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting

situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a

licensed engineer in the State of the project.

Parcade Entrance 1

P A R C A D E G A R A G EP A R C A D E G A R A G E

LED Lighting

PARK.4Parking Garage IDIlluminated Letters

FREE PARKINGSATURDAY & SUNDAY

Except Event Parking

parkeparkeugene.com

PARK.7Parking GarageInformational Sign

PARK.6aParking Garage IDFlag Mounted Sign

ENTRANCEEXITEXIT

PARK.5Parking Garage IDEntrance / Exit Sign

Front View: Parcade EntranceSCALE: 1/4" = 1'-0"1

*Fabricator MUST verify all measurements in �eld prior to fabrication

17'-10 1/2" VIF

1'-6"

14'-7 1/2" VIF14'-7 1/2" VIF

Remove existing signs: 1. Flag Sign

Re-surface garage where needed prior to installation of new signs. (Patch/Paint)

Measurements given as an estimate only. The fabricator MUST verify all measurements for signs in field prior to fabrication.

1

MunicipalCourt Lot

HultGarage

ParcadeGarage

Federal Court Lot

BroadwayNorth

Garage

BroadwaySouth

Garage

OverparkGarage

Pearl StGarage

AmtrakLot

EXIT -3

EXITENTRY -1

ENTRY - 2ENTRY - 4

EXITENTRY -1

ENTRY -2

PublicLibrary

McDonaldTheater

ActorsCabaret

LCCDowntown

OregonContemporary

Theatre

The JazzStation

VisitorCenter

Paci�cUniversity

WOWHall

SheddInstitute

GreyhoundBus Depot

Park Blocks

DefazioPed/Bike

Bridge

Lane TransitDistrict

HultCenter

PostO�ce

CountyCourthouse

MunicipalCourthouse

FederalCourthouse

Train Depot

Shelton McMurpheyJohnson House

Garage Plan View

Page 42: Wayfinding and Signage System - Eugene, OR

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH

7-5-17

9-21-17

D.23

SPECIFICATIONS

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting

situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a

licensed engineer in the State of the project.

Parcade Entrance 2

PARK.4Parking Garage IDIlluminated Letters

PARK.7Parking GarageInformational Sign

FREE PARKINGSATURDAY & SUNDAY

Except Event Parking

parkeparkeugene.com

ENTRANCE

LED Lighting

PARK.5Parking Garage IDEntrance / Exit Sign

PARK.6aParking Garage IDFlag Mounted Sign

P A R C A D EP A R C A D E

Front View: Parcade Entrance 2SCALE: 1/4" = 1'-0"1

*Fabricator MUST verify all measurements in �eld prior to fabrication

1'-6"

1'-2"

16'-10" VIF

Remove existing signs: 1. Garage Name Letters2. Flag mounted sign

Re-surface garage where needed prior to installation of new signs. (Patch/Paint)

Measurements given as an estimate only. The fabricator MUST verify all measurements for signs in field prior to fabrication.

1

2

MunicipalCourt Lot

HultGarage

ParcadeGarage

Federal Court Lot

BroadwayNorth

Garage

BroadwaySouth

Garage

OverparkGarage

Pearl StGarage

AmtrakLot

EXIT -3

EXITENTRY -1

ENTRY - 2ENTRY - 4

EXITENTRY -1

ENTRY -2

PublicLibrary

McDonaldTheater

ActorsCabaret

LCCDowntown

OregonContemporary

Theatre

The JazzStation

VisitorCenter

Paci�cUniversity

WOWHall

SheddInstitute

GreyhoundBus Depot

Park Blocks

DefazioPed/Bike

Bridge

Lane TransitDistrict

HultCenter

PostO�ce

CountyCourthouse

MunicipalCourthouse

FederalCourthouse

Train Depot

Shelton McMurpheyJohnson House

Garage Plan View

Page 43: Wayfinding and Signage System - Eugene, OR

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH

7-5-17

9-21-17

D.24

SPECIFICATIONS

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting

situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a

licensed engineer in the State of the project.

Pearl Garage Entrance

PARK.5Parking Garage IDEntrance / Exit Sign

ENTRANCEEXIT

LED Lighting

PARK.4Parking Garage IDIlluminated Letters

P E A R L S T R E E T G A R A G EP E A R L S T R E E T G A R A G E

PERMIT PARKING

ONLY

EXCEPT AT METERS

8am-5pmMon-Fri

parkeparkeugene.com

PARK.7Parking Garage

Informational Sign

PARK.6Parking Garage IDFlag Mounted Sign

*Fabricator MUST verify all measurements in �eld prior to fabrication

Front View: Pearl GarageSCALE: 3/8" = 1'-0"1

1'-2"

12'-7" VIF 12'-7" VIF

Remove existing signs: 1. Flag Mounted Sign

Re-surface garage where needed prior to installation of new signs. (Patch/Paint)

Measurements given as an estimate only. The fabricator MUST verify all measurements for signs in field prior to fabrication.

1

MunicipalCourt Lot

HultGarage

ParcadeGarage

Federal Court Lot

BroadwayNorth

Garage

BroadwaySouth

Garage

OverparkGarage

Pearl StGarage

AmtrakLot

EXIT -3

EXITENTRY -1

ENTRY - 2ENTRY - 4

EXITENTRY -1

ENTRY -2

PublicLibrary

McDonaldTheater

ActorsCabaret

LCCDowntown

OregonContemporary

Theatre

The JazzStation

VisitorCenter

Paci�cUniversity

WOWHall

SheddInstitute

GreyhoundBus Depot

Park Blocks

DefazioPed/Bike

Bridge

Lane TransitDistrict

HultCenter

PostO�ce

CountyCourthouse

MunicipalCourthouse

FederalCourthouse

Train Depot

Shelton McMurpheyJohnson House

Garage Plan View

Page 44: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.25

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type OVD.1 Overhead Vehicular

Directional

Overhead DirectionalOVD.1

PARK

YIELD

EXIT

DO NOT ENTER

NO CASH

CASH OK

CREDIT ORVALIDATIONS

Front View: OVD.1SCALE: 1/2" = 1'-0"1

Alternate LayoutsFinal Messages TBD by Client

R4 14

R5 14

R6 14

R5 141'-1 1/2" 7"

5'-10"- VIF

*Fabricator MUST verify all measurements in �eld prior to fabrication

14. SIGN PANEL - REFLECTIVE MATERIAL: 1/8" thk Aluminum sheet FABRICATION PROCESS: Router Cut EDGES: Smooth COLOR: custom, as noted GRAPHIC BACKGROUND AND COPY PROCESS:

3M custom inks print direct to 3930 with 3M approved UV/Graffiti Vinyl Over-laminate. (See Color Sheet for all color and material specifications)

FASTENER: Press-roll per 3M requirements. Mechanically Fasten to Parking Garage Structure. Mounting varies per location.

Page 45: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.26

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type COLUMN.1 Column Wrap

Column WrapCOLUMN.1

3 3

1 345

Front View: COLUMN.1SCALE: 1/2" = 1'-0"1 Side View

Level Layouts

Side View Side View

P8 15

P1 15

*Fabricator MUST verify all measurements in �eld prior to fabrication

Width Varies per Garage"

3'-10"

15. PAINTED COLUMN Masked /Painted graphics. To follow ePark

Eugene paint standards.

NOTE: Conditions Vary per location. Fabricator to field verify prior to fabrication.

TYPICAL COLUMN SIZES Pearl St Garage: 1'-6" x 1'-6" Overpark: 1'-8" x 1'-2" Broadway N&S: 1'-0" x 2'-0" Parcade: 2'-0" x 2'-0" Hult Garage: 1'-4" dia Round Column

Page 46: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.27

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type INFO.1 Information Sign

Information SignINFO.1

Front View: INFO.1SCALE: 1/2" = 1'-0"1

Graphic Layouts: INFO.1SCALE: 1" = 1'-0"2

LEVELS2,3,4

PERMITPARKING

ONLY

LEVELS2,3,4

PERMITPARKING

ONLY

PAY AT METER

CHECK

SPACE NUMBER

Final Messages TBD by Client

V1 16

P4 16

*Fabricator MUST verify all measurements in �eld priorto fabrication

2 3/4"1 3/4"

2"1 3/4"

2"2 1/4"

2"2 1/4"

2"

3"

3Elevator, Restroom

1'-5"

7"

1"1 1/4"

2 3/4" 2" 1 1/2"

11"

2'-0"

1'-6"

6 1/4"

4 1/2"3 1/2"

16. SIGN PANEL - PAINT & VINYL MATERIAL: 1/8" thk Aluminum sheet FABRICATION PROCESS: Router Cut EDGES: Smooth COLOR: custom, as noted SURFACE PROCESS: Paint all exposed surfaces

with Matthews Acrylic Polyurethane, with clear coat satin finish.

GRAPHICS (Messages, Symbols, Arrows): 3M Scotchcal Electrocut Graphic Vinyl Film, with

printed graphics. FASTENER: Mechanically fastened to column

with tamper resistant hardware.

NOTE: Conditions Vary per location. Fabricator to field verify prior to fabrication.

TYPICAL COLUMN SIZES Pearl St Garage: 1'-6" x 1'-6" Overpark: 1'-8" x 1'-2" Broadway N&S: 1'-0" x 2'-0" Parcade: 2'-0" x 2'-0" Hult Garage: 1'-4" dia Round Column

Page 47: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.28

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type SPACE.1 Space Identification

Space IdentificationSPACE.1

Front View: SPACE.1SCALE: 1/2" = 1'-0"1

PERMITPARKING

ONLY7AM-6PMMON-FRI

Graphic Layouts: SPACE.1SCALE: 1 1/2" = 1'-0"2

E26611515-180

ELECTRICVEHICLE

CHARGINGONLY

RESERVEDPARKINGPERMIT

PARKINGONLY

7AM-6PMMON-FRI

RESERVEDPARKING

UNAUTHORIZED VEHICLE CITED OR TOWED AT OWNERS EXPENSE. EUGENE CODE 5.240

Final Messages TBD by Client

Changeable insert:Plastic changeable track with acrylic facew/ slot for 5”x 9” sheet of paper.

9"

5"

P1 16

V2 161'-6"

1'-0"

1'-0"

16. SIGN PANEL - PAINT & VINYL MATERIAL: 1/8" thk Aluminum sheet FABRICATION PROCESS: Router Cut EDGES: Smooth COLOR: custom, as noted SURFACE PROCESS: Paint all exposed surfaces

with Matthews Acrylic Polyurethane, with clear coat satin finish.

GRAPHICS (Messages, Symbols, Arrows): 3M Scotchcal Electrocut Graphic Vinyl Film, with

printed graphics. FASTENER: Mechanically fastened to wall/ or

column with tamper resistant hardware.

NOTE: Conditions Vary per location. Fabricator to field verify prior to fabrication.

Page 48: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.29

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type TEMP.1 Temporary Sign

Temporary SignTEMP.1

17. A-FRAME PRODUCT http://www.displays2go.com (or equal) Double-sided Plastic Sign Display 24" x 36" w/

Inserts and Lenses SKU#: BSWPBKCBLN Material: Plastic Color: Black Media Size: 24" x 36" Loading Style: Side Insert

A-FRAME GRAPHIC INSERT Material: 3/16" thk Coroplast or equal. Graphics: Slips into frame and is secured by

existing molded tabs.

Front View: TEMP.1SCALE: 1/2" = 1'-0"1

NORTHELEVATOR

IS OUT

parkeparkeugene.com

PLEASE USE SOUTH OR EAST ELEVATORS

NORTHELEVATOR

IS OUT

parkeparkeugene.com

PLEASE USE SOUTH OR EAST ELEVATORS

NORTHELEVATOR

IS OUT

parkeparkeugene.com

PLEASE USE SOUTH OR EAST ELEVATORS

Side View Back View

Sample Template

– 17

Page 49: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.30

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type ELEVATOR.1 Elevator ID

Elevator IDELEVATOR.1

Exit to 10th AveNORTH ELEVATOR

Front View: ELEVATOR.1SCALE: 1/2" = 1'-0"1

Alternate LayoutsFinal Messages TBD by Client

*Fabricator MUST verify all measurements in �eld prior to fabrication

Exit to 8th AveSOUTH ELEVATOR

Exit to Charnelton StEAST ELEVATOR

Exit to Lincoln StWEST ELEVATOR

Paint Elevator BankWith Level Color

P4 16

V1 16

4'-0"Vaires per location

8"

16. SIGN PANEL - PAINT & VINYL MATERIAL: 1/8" thk Aluminum sheet FABRICATION PROCESS: Router Cut EDGES: Smooth COLOR: custom, as noted SURFACE PROCESS: Paint all exposed surfaces

with Matthews Acrylic Polyurethane, with clear coat satin finish.

GRAPHICS (Messages, Symbols, Arrows): 3M Scotchcal Electrocut Graphic Vinyl Film, with

printed graphics. FASTENER: Mechanically fastened to wall with

tamper resistant hardware.

NOTE: Conditions Vary per location. Fabricator to field verify prior to fabrication.

Page 50: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.31

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type RULES.1 Garage Rules

Garage RulesRULES.1

Front View: RULES.1SCALE: 1/2" = 1'-0"1

ATTENTION

11”x17”Insert

11”x17”Insert

ATTENTION

11”x17”Insert

11”x17”Insert

Layout Template

P4 17

V1 17

5'-0"

CL

1 1/2"4"

1'-5 1/2"

1'-5 1/2"

11"

2'-4"

17. SIGN PANEL - CHANGEABLE INSERTS MATERIAL: Fabricated Aluminum sign Frame.

Square edge profile, Non-Glare Acrylic Lens with Subsurface Digitally Printed Graphics. Room for 11"x 17" insert. Final insert Layouts TBD by client

COLOR: As specified in drawings. Mechanically fastened to wall with tamper

resistant hardware.

NOTE: Conditions Vary per location. Fabricator to field verify prior to fabrication.

Page 51: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.32

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type STAIR.1 Stairwell ID

Stairwell IDSTAIR.1

Front View: STAIR.1SCALE: 1/2" = 1'-0"1

EXIT

Exit to 10th AveNORTH STAIR

Exit to 8th AveSOUTH STAIR

Exit to Charnelton StEAST STAIR

Exit to Lincoln StWEST STAIR

Alternate Layout ExamplesFinal Messages TBD by Client

Paint Elevator BankWith Level Color

P4 16

V1 167"

3'-4"VIF. Varies per Location

*Fabricator MUST verify all measurements in �eld prior to fabrication

16. SIGN PANEL - PAINT & VINYL MATERIAL: 1/8" thk Aluminum sheet FABRICATION PROCESS: Router Cut EDGES: Smooth COLOR: custom, as noted SURFACE PROCESS: Paint all exposed surfaces

with Matthews Acrylic Polyurethane, with clear coat satin finish.

GRAPHICS (Messages, Symbols, Arrows): 3M Scotchcal Electrocut Graphic Vinyl Film, with

printed graphics. FASTENER: Mechanically fastened to wall with

tamper resistant hardware.

NOTE: Conditions Vary per location. Fabricator to field verify prior to fabrication.

Page 52: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.33

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type STAIR.2 Stairwell ID

Stairwell IDSTAIR.2

3NORTH STAIRExit to 10th Ave

Front View: STAIR.1SCALE: 1/2" = 1'-0"1

1NORTH STAIRExit to 10th Ave

2NORTH STAIRExit to 10th Ave

3NORTH STAIRExit to 10th Ave

4NORTH STAIRExit to 10th Ave

5NORTH STAIRExit to 10th Ave

Level Layouts

P10P6 P7 P8 P9

1'-5"

7"

P8 16

P1 16

P4 16V1 16

2'-0"

1'-6"

10 1/2"

1"1 3/4"1"1"1 1/4"

16. SIGN PANEL - PAINT & VINYL MATERIAL: 1/8" thk Aluminum sheet FABRICATION PROCESS: Router Cut EDGES: Smooth COLOR: custom, as noted SURFACE PROCESS: Paint all exposed surfaces

with Matthews Acrylic Polyurethane, with clear coat satin finish.

GRAPHICS (Messages, Symbols, Arrows): 3M Scotchcal Electrocut Graphic Vinyl Film, with

printed graphics. FASTENER: Mechanically fastened to wall or

column with tamper resistant hardware.

NOTE: Conditions Vary per location. Fabricator to field verify prior to fabrication.

Page 53: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.34

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type METER1&2 PARking Meter Info

Parking Meter InfoMETER.1&2

Front View: METER.1 & 2SCALE: 1/2" = 1'-0"1

RATES

PAYHERE

Graphic Layout

Final Layout TBD

PAYHERE

BROADWAY SOUTH

$1.00 per hour$6.00 per daySaturday & Sunday Free

Except posted event parking, New Years Day, Martin Luther King Jr. Day, President’s Day, Memorial Day, July 4th, Labor Day, Veterans Day, Thanksgiving Day & Christmas Day.

Failure to pay is a violation of Municipal Code 5.240 and 5.285 and is subject to citation and/ or impoundment.

Monday through Friday, 7am -6pm

Garage SecuritySeguridad del Garaje541-682-8200

parkeparkeugene.com541-682-5729

Cash, Credit, Permit, Park Mobile

3 1/4"1 1/2"3 1/4"

P4 16

V1 161'-6"

1'-6"

1'-6"

2'-3"

2'-3"

16. SIGN PANEL - PAINT & VINYL MATERIAL: 1/8" thk Aluminum sheet FABRICATION PROCESS: Router Cut EDGES: Smooth COLOR: custom, as noted SURFACE PROCESS: Paint all exposed surfaces

with Matthews Acrylic Polyurethane, with clear coat satin finish.

GRAPHICS (Messages, Symbols, Arrows): 3M Scotchcal Electrocut Graphic Vinyl Film, with

printed graphics. FASTENER: Mechanically fastened to wall or

column with tamper resistant hardware.

NOTE: Conditions Vary per location. Fabricator to field verify prior to fabrication.

Page 54: Wayfinding and Signage System - Eugene, OR

SPECIFICATIONS SIGN TYPE: FUNCTION:

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH7-5-17

9-21-17

D.35

NOTES

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

Sign Type BOOTH.1 Parking Booth

Parking BoothBOOTH.1

43"

41"

6"2"

12"

1" DRIPANGLE(TYP)

146" O.A.

10"

51 716 " O.A.

24"3"

32"2"

36"2"

34" 3"

136"

48"

80"

ATTIC VENT(4 PLACES)

REMOVABLELIFTING EYE(4 PLACES)

105" O.A.

IN-WALL SLIDINGWINDOW

SLIDING DOOR w/FIXED WINDOW

Left View: BOOTH.1SCALE: 1/2" = 1'-0"1 Front View: BOOTH.1

SCALE: 1/2" = 1'-0"2

P5

P5

17. PAINT Paint parking pay booths. Refernce drawing &

color chart for specifications. (Booths by others, drawing provided for reference only)

Page 55: Wayfinding and Signage System - Eugene, OR

Graphic LayoutsE

Page 56: Wayfinding and Signage System - Eugene, OR

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH

7-5-17

9-21-17

E.1

SPECIFICATIONS

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting

situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a

licensed engineer in the State of the project.

PARK.2, PARK.2aLayout Drawings

SIGN PANEL LAYOUTS: NOTES:• Refer to message schedule for actual sign messages.

• Panel layouts for ALL sign locations shall be included in shop drawings for review by designer and client.

Hult CenterParking

NEXT LEFT

ParcadeGarage

Hult CtrParking

OverparkGarage

Pearl StGarage

8th Ave Lot

PUBLICPARKING

8th Ave Lot

PUBLICPARKING

Hult CenterParking

Hult CenterParking

BroadwayGarage

S N

ParcadeGarage

RIGHT LANE

Hult CenterParking

BroadwayGarage

N S

Graphic Layouts: PARK.2-2aSCALE: 3/4" = 1'-0"2

LOC 400 LOC 400a

LOC 402LOC 408LOC 413 LOC 413a

LOC 408a

LOC 403 LOC 403b

LOC 404 LOC 405a

2'-3"

1'-4"

1'-10"

3 1/2"3"

1 1/2"3"

4"

3"

Ø 1'-0"

Ø 10 1/2"

3 3/4"

3 1/2"

1'-0 1/2"

1'-0 1/2"

2 3/4"3"

1 1/2"3"

2 1/4"2 3/4"

2"3 1/2"

1'-1"

Page 57: Wayfinding and Signage System - Eugene, OR

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH

7-5-17

9-21-17

E.2

SPECIFICATIONS

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting

situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a

licensed engineer in the State of the project.

PARK.3 Layout Drawings

SIGN PANEL LAYOUTS: NOTES:• Refer to message schedule for actual sign messages.

• Panel layouts for ALL sign locations shall be included in shop drawings for review by designer and client.

MunicipalCourt Lot

PUBLICPARKING

EugeneTrainDepot

PUBLICPARKING

Graphic Layouts: PARK.3SCALE: 3/4" = 1'-0"1

LOC 411 LOC 425

2'-3"

2'-0 1/2"

Ø 1'-3"Ø 1'-1 1/4"

1'-8"

5'-3"

8"

4"

2 3/4"

4"

3 1/2"

3 1/2"3"

1 3/4"

Page 58: Wayfinding and Signage System - Eugene, OR

Construction DetailsF

Page 59: Wayfinding and Signage System - Eugene, OR

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH

7-5-17

9-21-17

F.1

SPECIFICATIONS

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting

situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a

licensed engineer in the State of the project.

Construction Details

Sign Type: PARK.1PARK.1bPARK.2PARK.3

PARK.1-3 Section Details

3/16" thick Aluminum Bracket, spot weld to back of sign panel

1/4" thick Aluminum Sheet

4" x 4" x .25" wall Aluminum Square Tube

Section: PARK.1, PARK.2SCALE: 3" = 1’ -0"1

Section: PARK.3SCALE: 3" = 1’ -0"2

1/4" thick Aluminum Sheet

4" x 4" x .25" wall Aluminum Square Tube

Section: PARK.1bSCALE: 3" = 1’ -0"3

1/4" thick Aluminum Sheet1" Aluminum reverse channel letter (P-Symbol)

1/4" thick fabricated Aluminum Sign Cabinet

Page 60: Wayfinding and Signage System - Eugene, OR

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH

7-5-17

9-21-17

F.2

SPECIFICATIONS

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting

situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a

licensed engineer in the State of the project.

Transpo Break-Safe

Page 61: Wayfinding and Signage System - Eugene, OR

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH

7-5-17

9-21-17

F.3

SPECIFICATIONS

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting

situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a

licensed engineer in the State of the project.

Foundation Details

Construction Details

Sign Type: GATE.1

Sidewalk Footer Placement Details

The FABRICATOR shall be familiar with all site conditions and shall be responsible for all underground utility checks.

The FABRICATOR shall be familiar with all basement/vault locations by obtaining plans from the local municipality Department of Public Works.

Where a basement/vault interferes with a proposed location, the sign shall be relocated to a location deemed appropriate by the municipalities Department of Public Works

Where relocation is not an option the FABRICATOR will develop the appropriate mounting solution. The solution shall meet all engineering criteria as established by the standard footings (i.e. windloads).

FINAL DESIGNS AND SHOP DRAWINGS SHALL BE SUPPLIED BY THE FABRICATOR FOR EACH OF THE BREAK-AWAY POLES IDENTIFIED AND AN OREGON REGISTERED PROFESSIONAL ENGINEER IS REQUIRED TO SIGN AND SEAL THE SUBMITTAL OF SHOP DRAWINGS.

NOTE: 1) SOIL IS AVERAGE WITH MAXIMUM ALLOWABLE

SOIL PRESSURE OF 3,000 POUNDS PER SQUARE FOOT. SOIL UNIT WEIGHT OF 125 PCF AND FRICTION ANGLE OF 30 DEGREES (ASSUMED).

2) CONCRETE STRENGTH AT 28 DAYS F’C=4,000 PSI REINFORCEMENT SHALL BE ASTM 36 FY=60,000 PSI

3) FOLLOW 2009 ODOT DESIGN STANDARDS FOR MATERIAL AND CONSTRUCTION INFORMATION FOR THE SIGN POST BASES AND FOUNDATIONS NOT OTHERWISE SPECIFIED IN THESE CONTRACT DRAWINGS.

4) FOR SIGN POST SIZES REFER TO THE DESIGN INTENT DRAWING SHEETS.3'-0" Minimum

3'-0"

Min

imum

5" s

idew

alks

7" d

rivew

ays

3'-0" square

2'-0"

5" s

idew

alks

7" d

rivew

ays

4'-0" square

1'-1"

5" s

idew

alks

7" d

rivew

ays

3'-0" Minimum

3'-0"

Min

imum

4"

Section View: Foundation @ PaversSCALE: 3/4" = 1'-0"2

Existing Pavers

Section View: Foundation @ ConcreteSCALE: 3/4" = 1'-0"1

Existing Concrete Slab

Transpo® AS4 Break-SafeBreak Away Sign Support

Class B Concrete FootingReference ODOT

4” x 4” Rectangle Aluminum Post

Transpo® AS4 Break-SafeBreak Away Sign Support

4” x 4” Rectangle Aluminum Post

Transpo® AS4 Break-SafeBreak Away Sign Support

4” x 4” Rectangle Aluminum Post

Transpo® AS4 Break-SafeBreak Away Sign Support

4” x 4” Rectangle Aluminum Post Note: Design Wind load 300 PSF 120 MPH,3 Sec Gust Wind, Exp C

Note: Design Wind load 300 PSF 120 MPH,3 Sec Gust Wind, Exp C

Note: Design Wind load 300 PSF 120 MPH,3 Sec Gust Wind, Exp C

Note: Design Wind load 300 PSF 120 MPH,3 Sec Gust Wind, Exp C

Class B Concrete FootingReference ODOT

Section View: Foundation: Shallow DepthSCALE: 3/4" = 1'-0"3

Existing Concrete Slab

Class B Concrete FootingReference ODOT Section View: Foundation: Extremely Shallow Depth

SCALE: 3/4" = 1'-0"4

Existing Concrete Slab

Class B Concrete FootingReference ODOT

Page 62: Wayfinding and Signage System - Eugene, OR

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH

7-5-17

9-21-17

F.4

SPECIFICATIONS

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting

situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a

licensed engineer in the State of the project.

Plate-to-PlateFooter Detail

Below Grade

Below Grade

Section: Bolt w/ Nut Plate-to-Plate MOUNTINGBrick Pavers SurfaceSCALE: 1" = 1' - 0"2

Section: Bolt w/ Nut Plate-to-Plate MOUNTINGConcrete Pavement SurfaceSCALE: 1" = 1' - 0"1

Weep Holes as Required

Aluminum Post(Size varies by sign type)

Leveling Nuts

1/2" thk Aluminum Plates

6" Crushed Stone

3" Base Concrete Slab

5" SmoothConcrete Pad

Typ. vertical rebar as required

6" Crushed Stone

2–3" Bitum. Setting Bed

Poured in Place Concrete Footer4,000 psi @ 28 Days

1" DIA Steel Bolts w/ Hex Head nut at bottom

Compacted Crushed Stone as Required

Provide weather seal sand &gravel @ footing

5"3'

-0"

min

.

Sonotube Size Varies by Sign TypeEngineer to determine size.

Weep Holes as Required

Aluminum Post(Size varies by sign type)

Leveling Nuts

1/2" thk Aluminum Plates

5" Brick Pavers

Typ. vertical rebar as required

Poured in Place Concrete Footer4,000 psi @ 28 Days

1" DIA Steel Bolts w/ Hex Head nut at bottom

Compacted Crushed Stone as Required

Provide weather seal sand &gravel @ footing

5"3'

-0"

min

.

Sonotube Size Varies by Sign TypeEngineer to determine size.

The FABRICATOR shall be familiar with all site conditions and shall be responsible for all underground utility checks.

The FABRICATOR shall be familiar with all basement/vault locations by obtaining plans from the local municipality Department of Public Works.

Where a basement/vault interferes with a proposed location, the sign shall be relocated to a location deemed appropriate by the municipalities Department of Public Works

Where relocation is not an option the FABRICATOR will develop the appropriate mounting solution. The solution shall meet all engineering criteria as established by the standard footings (i.e. windloads).

FINAL DESIGNS AND SHOP DRAWINGS SHALL BE SUPPLIED BY THE FABRICATOR FOR EACH OF THE BREAK-AWAY POLES IDENTIFIED AND AN OREGON REGISTERED PROFESSIONAL ENGINEER IS REQUIRED TO SIGN AND SEAL THE SUBMITTAL OF SHOP DRAWINGS.

NOTE: 1) SOIL IS AVERAGE WITH MAXIMUM ALLOWABLE

SOIL PRESSURE OF 3,000 POUNDS PER SQUARE FOOT. SOIL UNIT WEIGHT OF 125 PCF AND FRICTION ANGLE OF 30 DEGREES (ASSUMED).

2) CONCRETE STRENGTH AT 28 DAYS F’C=4,000 PSI REINFORCEMENT SHALL BE ASTM 36 FY=60,000 PSI

3) FOLLOW THE MOST RECENT ODOT DESIGN STANDARDS FOR MATERIAL AND CONSTRUCTION INFORMATION FOR THE SIGN POST BASES AND FOUNDATIONS NOT OTHERWISE SPECIFIED IN THESE CONTRACT DRAWINGS.

4) FOR SIGN POST SIZES REFER TO THE DESIGN INTENT DRAWING SHEETS.

Page 63: Wayfinding and Signage System - Eugene, OR

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH

7-5-17

9-21-17

F.5

SPECIFICATIONS

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting

situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a

licensed engineer in the State of the project.

Sidewalk FooterPlacement Details

Sidewalk Footer Placement Details

The FABRICATOR shall be familiar with all site conditions and shall be responsible for all underground utility checks.

The FABRICATOR shall be familiar with all basement/vault locations by obtaining plans from the local municipality Department of Public Works.

Where a basement/vault interferes with a proposed location, the sign shall be relocated to a location deemed appropriate by the municipalities Department of Public Works

Where relocation is not an option the FABRICATOR will develop the appropriate mounting solution. The solution shall meet all engineering criteria as established by the standard footings (i.e. windloads).

FINAL DESIGNS AND SHOP DRAWINGS SHALL BE SUPPLIED BY THE FABRICATOR FOR EACH OF THE BREAK-AWAY POLES IDENTIFIED AND AN OREGON REGISTERED PROFESSIONAL ENGINEER IS REQUIRED TO SIGN AND SEAL THE SUBMITTAL OF SHOP DRAWINGS.

NOTE: 1) SOIL IS AVERAGE WITH MAXIMUM ALLOWABLE

SOIL PRESSURE OF 3,000 POUNDS PER SQUARE FOOT. SOIL UNIT WEIGHT OF 125 PCF AND FRICTION ANGLE OF 30 DEGREES (ASSUMED).

2) CONCRETE STRENGTH AT 28 DAYS F’C=4,000 PSI REINFORCEMENT SHALL BE ASTM 36 FY=60,000 PSI

3) FOLLOW THE LATEST ODOT DESIGN STANDARDS FOR MATERIAL AND CONSTRUCTION INFORMATION FOR THE SIGN POST BASES AND FOUNDATIONS NOT OTHERWISE SPECIFIED IN THESE CONTRACT DRAWINGS.

4) FOR SIGN POST SIZES REFER TO THE DESIGN INTENT DRAWING SHEETS.

Plan: Footer PlacementSCALE: NTS1

Plan View: Footer SCALE: 1" = 1' - 0"2

NOTE: When locating a footer within a single pavement block adjacent to at least 2 expansion joints, the entire block of pavementshall be removed and replaced with the same materials and finish of adjacent sidewalk areas.

Plan: Specialty Pavers Footer PlacementSCALE: NTS3

Unacceptable Footer Detail

Unacceptable Footer Detail

Unacceptable Footer Detail

NOTE: The pattern of bricks need to be removed, stored and replacedin the order they were removed. Marking the Specialty Pavers sidewalk with spray paint will NOT be allowed.

Acceptable Footer Detail

Acceptable Footer Detail

Acceptable Footer Detail

Vari

es

Varies

Footer

Class BConcrete FootingReference State DOTReq. Standards

Break-Away System

Sign Post

Existing sidewalk blockto be removed and replaced

Footer

Sign Post

Existing Specialty Paversto be removed, saved and replaced.

CL

C L

Sign Post

Page 64: Wayfinding and Signage System - Eugene, OR

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

LH

7-5-17

9-21-17

F.6

SPECIFICATIONS

City of Eugene Wayfinding and Signage System

Parking

120 North Church StreetSuite 208West Chester, PA 19380T 484.266.0648www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting

situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.4. Contractor must provide shop drawings for all structural components, signed and sealed by a

licensed engineer in the State of the project.

Bitro Group Resno Face-Lit Letters