Upload
roger-rodriguez
View
53
Download
1
Embed Size (px)
Citation preview
5/27/2018 Xerox 650_1300 CED v2.00
1/26
Customer Expectations Document 1
Customer Expectations Document
Xerox 650/1300 Continuous FeedPrinter
Includes:
Xerox 650/1300 CF Printer
Dec 19, 2007 v. 2.00
5/27/2018 Xerox 650_1300 CED v2.00
2/26
Customer Expectations Document 2
Prepared by:
Xerox CorporationProduction Solutions Business Unit800 Phillips Road, Bldg. 0139-26AWebster, NY 14580USA
2007 by Xerox Corporation. All rights reserved.
Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory judiciallaw or hereinafter granted, including without limitation, material generated from the software programs which are displayed on thescreen such as icons, screen displays, looks, etc.
Printed in the United States of America.
XEROX and all Xerox product names mentioned in this publication are trademarks of XEROX CORPORATION. Other company
trademarks are also acknowledged.
Changes are periodically made to this document. Changes, technical inaccuracies, and typographic errors will be corrected insubsequent editions.
5/27/2018 Xerox 650_1300 CED v2.00
3/26
Customer Expectations Document 3
Table of Contents
1 Introduct ion ...............................................................................4
2 Product Overview ......................................................................5
3 Optimum Product Performance ...............................................6
4 Environmental Factors .............................................................7
5 Product Space & Power Requirements...................................8
6 System Configuration and Installation ...................................96.1 Installation Planning Guide .............................................................................................................9
6.2 Customer Responsibilities ..............................................................................................................9
6.3
System Installation ..........................................................................................................................9
7 Operat ions ...............................................................................10
8 Suppl ies and Component Yields ...........................................118.1 Disposal Process ......................................................................................................................... 11
9 System Performance Impacts ................................................12
10 Overview of Sub-Systems ......................................................13
11
FreeFlow Digital Workflow Collection ...............................14
12 FreeFlowTMVariable InformationSuite ..................................15
13 Network Connectivity & Job Submission .............................16
14 Optional Digital Front End (DFE) FreeFlowTM
DocuSP.....17
15 Print from Digital File (PDLs) & Host Printing .....................18
16 Paper Specif ications ...............................................................19
17
Printer.......................................................................................20
18 Image Quality Expectations ...................................................21
19 Pre & Post Finishing Devices ................................................22
20 System Productivi ty: Xerox 650/1300 CF..............................23
21Appendix A ..............................................................................24
22Appendix B ..............................................................................25
5/27/2018 Xerox 650_1300 CED v2.00
4/26
Customer Expectations Document 4
1 Introduction
The purpose of this document is to help you understand the capabilities, requirements, andfeatures of the Xerox 650/1300 Continuous Feed (CF) Printer. Review of this material is requiredprior to signing an order for the Xerox 650/1300 CF Printer.
This document addresses high-level expectations. Additional details are available from yourXerox Sales Team. Guidelines for site planning, installation planning, product documentation andtraining materials are provided in the Xerox 650/1300 CF Printer documentation that you willreceive. The specifications stated in this document generally refer to a single engine, unlessotherwise stated.
5/27/2018 Xerox 650_1300 CED v2.00
5/26
Customer Expectations Document 5
2 Product Overview
The Xerox 650/1300 CF printer sets a new benchmark in the world of continuous web printing.The flagship entry in Xeroxs continuous feed family sets a new standard for productivity in anyenvironment. At 300 feet per minute, its our fastest Continuous Feed printing system. The 1200x 600dpi output print resolution makes it our highest image quality performer. You also get high-speed scalable RIPing, complex document production, industry-leading reliability, and theflexibility to process and print multiple data streams. Plus, its fully supported by Xeroxs end-to-end serviceunmatched in the entire industry.
The following table contains some of the high level specifications of the product .
Xerox 650/1300 CF Printer
Engine Technology LED Imaging
Fusing Technology Flash fusing technology
Engine Speed 300 ft/min / 91.4 m/min
Simplex impressions 654(letter), 616(A4), 2-Up mode
Duplex In-line
Duplex impressions 1308(letter), 1232 (A-4) 2-Up mode
Max Output Resolution 600x600 300 fpm; 1200x600 interpolated
Form feed Pinless and Pinfed
Paper WidthPinfed: 6.5 to 19.5Pinless: 8.0 to 19.5
Max Print Width1
Pinfed: 18.5"Pinless: 19.5" (Guaranteed up to 19.4)
Max Print Length 3 to 28 (1/6 increments)
Media WeightPinless: 64 - 200 gsmPinfed: 60-160 gsm
Key Datastreams
IPDS nativeOptional data stream support:LCDS, AFPDS via Emtex VIP Server, PS3, PCL5e, PCL6,PDF, TIFF, ASCII, VIPP & PPML via FreeFlow DocuSP
Front-End Options FreeFlow DocuSP & Emtex VIP Server
Page Id verification (SVS)2
Page ID verification
LanguagesEnglish & French(Italian, German, Spanish and Dutch available at Worldwidelaunch of product)
Preprinted Marks (Pinless) Not available
Pre/Post
Lasermax rolls System devices
Hunkeler devices(See Section 19 for specific models)
Stacker Available in pinfeed simplex only
Sensors and marks position3
o Registration mark for duplex printing can be placed in theregions specified in Appendix A & B.
o Backside mark sensing on downstream engine.o Top of Form detection for preprinted pinless paper.
1In duplex mode, printing is restricted in a zone surrounding the registration and sheet id marks that could
conflict with data being printed. This zone is described in Appendix A for pinfed paper and Appendix B forPinless paper.2In duplex mode, printing is restricted in a zone surrounding the registration and sheet id marks that could
conflict with data being printed. This zone is described in Appendix A for pinfed paper and Appendix B forPinless paper.
5/27/2018 Xerox 650_1300 CED v2.00
6/26
Customer Expectations Document 6
3 Optimum Product Performance
Print Volume Range
The Xerox 650/1300 CF printer is designed for an average monthly print volume (AMPV).
System AMPV
Xerox 650/1300 CFprinter
2M (linear feet)
Maximum duty cycle: Up to 30,000,000 images (8.5 x 11 or A4, 2up duplex) or
7.3 M Linear Feet
Maximum Duty cycle is defined as:
The maximum recommended monthly print volume support under standard vendor supplied
service (3x7 shift coverage). This defines the upper end of expected customer volume band forthe device.
The Customer should expect more frequent service calls as volumes increase.
Targeted maintenance service call activity prints between service calls on a digital webproduction system are dependent on customer requirements for volume, applications, andthroughput material. Trained operators can optimize performance output and minimize servicecalls.
5/27/2018 Xerox 650_1300 CED v2.00
7/26
Customer Expectations Document 7
4 Environmental Factors
Environmental Factor Minimum Maximum
Temperature 160
c, 60.8o
F 32o
c, 90o
FHumidity 15% RH 85% RH
Heat Emission N/A71,133 BTU/hour (Running)5,026 BTU/hour (Stand-by)
Power ConsumptionApproximately
1.6KVA (Average)(Standby)
Approximately23KVA (Average)
(Running)
Noise(Sound pressure level atoperator position)
N/AApproximately70 dB(Running)
55 dB (Stand-by)
10% V Configuration Minimum Nominal MaximumLow 1 200 208 230
Low 2 (withtransformer)
210 220 240Voltage(Processor)
High (withTransformer)
380 400 415
5/27/2018 Xerox 650_1300 CED v2.00
8/26
Customer Expectations Document 8
5 Product Space & Power Requirements
Item Xerox 650/1300 CF printer Comments
Size Printer
2990mm (W) X 990mm (D) X 1550mm
(H)117.8 (W) x 39.0 (D) x 61.1 (H)
Service Space
Single engine Xerox 650/1300 CFconfiguration(printer only)189 (4790mm) x 146 (3690mm)
Dependent upon configurationand pre/post finishing devices
Weight 4321 lb. (1,960 kg)Requires two engines for duplexconfiguration
PowerRequirements(60Hz
configuration)
200/208/230V 67A, 50/60 Hz withouttransformer210/220/240V 67A, 50/60Hz withtransformer
3 phase, and ground, 4 wiresBlower Unit - 208 2.0A two phasePLB power supply 110VAC wall plug
UL compliant
Powerreceptacle(60Hzconfiguration)
Pin and sleeve type rated at 100 amps,3250VAC, conforming to IEC 309-1 andIEC 309-2. Back box mounted or inlineconnector.Power Cord supplied with 60Hz printer is14.76 ft. of 4 wire, 2 AWG, rated at 100Amps with a Hubbell Lock (HBL4100P9W)male plug. See Installation Planning Guidefor receptacle options.
UL compliant
PowerRequirements(50Hzconfiguration)
380/400/415V 35A, 50Hz/60Hz withtransformer4 wires (cross section 10 sq mm), 3 phase,and ground, No neutral connectionRecommended wall breaker: 40ABlower unit 220V/ 1.9A 50Hz singlephasePLB power supply 220VAC wall plug
UL compliant
5/27/2018 Xerox 650_1300 CED v2.00
9/26
Customer Expectations Document 9
6 System Configuration and Installation
6.1 Installation Planning Guide
This section should be used in conjunction with the Xerox 650/1300 CF printer Installation
Planning Guide (IPG),which contains detailed specifications for size, weight, power, andenvironmental conditions. Only the most important requirements will be restated here.Information for pre & post finishing devices will be obtained from the Xerox finishing partnerselected for the install.
6.2 Customer Responsibilit ies
The following must be completed before the system can be delivered and will be assessed inthe final site check:
Item Comments
Identify placement of the system
Xerox performs a pre-site inspection to
validate adequate operator and servicespace.
Ensure the printer can be delivered tothe site
Appropriate delivery access
Supply the appropr iate electricalconnections
Dedicated power required
Install a network dropFor connection of FreeFlow DocuSPcontroller and or Printer Controller
Verify the strength and slope of thefloor
Done at pre-site inspection
Meet Environmental Specifications forroom temperature and relativehumidity year round
This is essential to the systems ability
to perform as expected; Xerox will notbe able to resolve performanceproblems encountered when the areais not maintained within this operatingrange. Temperature andhumidification control for sitesexceeding environmental boundaries.
Connect system to network or channelTo ensure successful connection intocustomers network or channel for jobsubmission etc.
6.3 System Installation
Allow an average of 5 days to complete a twin duplex system (printer only without pre/post)installation. Single engine simplex system without pre/post will be an average of 3 days.Pre/Post may add an additional 1-5 days depending on complexity of solution.
5/27/2018 Xerox 650_1300 CED v2.00
10/26
Customer Expectations Document 10
7 Operations
Item Xerox 650/1300 CF printer Comment
Power Up
Warm up from Power Saver
approx. 4 to 5 min.When powered up, the warm uptime will be up to 30 minutes toassure good IQ if the internal heaterhas been turned off. The machinecan be powered down with theinternal heater remaining on.
Paper Jams
When printing in nativeIPDS mode, jam recovery iscontrolled by the host andrecovery uses standardIPDS jam recovery
specification.When printing PDL datastreams with FreeFlowDocuSP, severalconfigurable recoveryoptions are available.(information detailed inDPCF-Pub Users Guide)
Paper jams in the system areimmediately indicated on the
printer GUI interfaces. Thisincludes jams in pre/postfinishing devices connected tothe Xerox PLB (Printer LineBus) management system
Job Integrity
System will only complete ajob when it is accurate thatis, no mismatched pages induplex applications. Xerox
continuous feed printersutilize a Page IDsynchronous verificationsystem to validate sideone/side two data matching.If there is a mismatch, thesystem will immediately stopshowing an error condition.
The printing system knows thelast successful sheet deliveredto output with Page ID
verification enabled. Marks areplaced on sheet in upstreamengine and detection andvalidation occurs beforeprinting on the downstreamengine with a fault conditionissued. Marks are placed onlyon one side.
Job Recovery
Most job interruptions are easilyrecoverable. In rare circumstancesa print job may have to be re-submitted and re-RIPed.
Job recovery operations aredocumented in the DPCF-Pubor other DFE Users Guide.
Billing Meters
Billing meters on the continuousfeed system increment by one forevery 100 feet of print. (Billing isactually calculated by the linearfoot)
Ask local analyst or salesrepresentative to explain yourmeter operation.
5/27/2018 Xerox 650_1300 CED v2.00
11/26
Customer Expectations Document 11
8 Supplies and Component Yields
The consumable supplies listed below are engineered specifically for use in the Xerox 650/1300CF printer and provide the highest and most consistent image quality, maximum machineproductivity, and uptime.
All yield estimates are based on the indicated 3% area coverage at standardized conditionsusing 2-up Xerox 20 lb. stock. Please note that actual yields vary greatly depending on areacoverage, paper stock, and image quality control settings. The current estimates are shownbelow.
Consumables
Item (unit)Part
NumberWeight
A4
Images /unit
Printed2-up
8 x 11
Images /unit
Printed 2-up
12 x 17
Images /unit
Developer (1 bottle) 5R718 3.5 Kg 1,185,000 1,260,000 577,500
Toner (1 bottle) @ 3% 6R01279 4 Kg 265,650 282,350 129,400
8.1 Disposal Process
Empty toner containers and waste containers are safe and approved for local recycling withcommon commercially used plastics. This is the preferred method of disposal.
For used toner and developer, landfill is the recommended method of disposal. This material isnot a hazardous waste according to Federal Regulation 40 CFR 261 and European WasteCode 08 03 18. State or Local requirements may, however, be more restrictive. Consult withthe appropriate State or Local waste disposal authorities for additional information. Ifincineration is to be carried out care must be taken to prevent dust clouds forming. Incinerateusing a closed container which retains the waste material
5/27/2018 Xerox 650_1300 CED v2.00
12/26
Customer Expectations Document 12
9 System Performance Impacts
Depending on job characteristics, the following may or may not impact system performance.
Item Xerox 650/1300 CF printer Comment
Images & pagecomplexity
Jobs with large quantities ofimages, logos, graphics andvery high density pages orexcessively high charactercontent etc. may causeclutching of printer (starting &stopping during print job)
As with any digital printer,some jobs may cause printperformance issues. Xeroxcontinuous feed printerhardware & software designhas been engineered tominimize these occurrences.When using FreeFlow DocuSPfor PDL printing, four startupmodes are GUI selectable toenable the operator to selectfor optimum performance: Print as received Print after job received Print after nimages
received Job collection mode
Number ofpages in job
When PDL printing, largenumbers of jobs containingsmall page counts can causeperformance degradation
When using the FreeFlowDocuSP, the operator canselect one of the print startupmodes from the printer GUIinterface to gain peakperformance from the printer: Job collection mode
5/27/2018 Xerox 650_1300 CED v2.00
13/26
Customer Expectations Document 13
10 Overview of Sub-Systems
The following sections give more detailed descriptions of the capabilities and limitations of eachof the major system components.
On-board Controller
The On-board controller controls; data input from external devices, RIP processing, IOT videointerface, duplex function, print line management and data master.
GUI Control ler
By communicating with the On-board controller, the GUI controller controls the IOT operationpanel (GUI touch panel) as well as the data input interface when used.
5/27/2018 Xerox 650_1300 CED v2.00
14/26
Customer Expectations Document 14
11 FreeFlow Digital Workf low Collection
FreeFlow Suite v6.0, which includes FreeFlow Print Manager, Process Manager, Makeready,Web Services,Output Manager and VI Suite will provide full name support for Xerox 650/1300CF Printing System.Earlier versions of FreeFlow (v5.0 or below) will not have namesupport.
Third party solutions will also be enabled for the Xerox 650/1300 CF printer. Specific solutionsto be defined at a later time.
5/27/2018 Xerox 650_1300 CED v2.00
15/26
Customer Expectations Document 15
12 FreeFlowTMVariable InformationSuite
The FreeFlow DocuSP accepts incoming jobs from client workstations, constructs the pages tobe printed, communicates with the printer interface, sends the pages to the print engine forprinting, and manages the job throughout the entire print process. After a job has beenreceived by a FreeFlow DocuSP Controller print queue, the job, and all of its components arestored on the hard drive and processed according to job requirements, before being sent to theXerox 650/1300 CF Printer.
Print Speed/System Performance
In general, the Xerox 650/1300 CF is capable of efficiently handling variable data jobs. Theexact size of the run length will vary based on the amount of variable coverage and elementdemographics (size and percentage of variable text vs. images/graphics).
Overall system performance is dependent upon many factors, including the variable dataapplication and workflow, network environment, image quality settings, and RIP and print rates.
The FreeFlow
TM
Variable Information Suite is supported on Continuous Feed printers as well asXerox cut-sheet print engines.
5/27/2018 Xerox 650_1300 CED v2.00
16/26
Customer Expectations Document 16
13 Network Connectivity & Job Submission
The Xerox 650/1300 CF printer supports industry standard network protocols and PageDescription Languages (See Xerox FreeFlow DocuSP common controller).
Item Xerox 650/1300 CF printer Comments
Networks
Ethernet Interface (100/1GbBaseT-Copper)
Second Ethernet Interface(100/1Gb BaseT-Copper)
Gigabit Fiber Optic
Optional connection
Optional connection in Europeonly
HostConnectivity
TCP/IP
Bus & Tag
Protocols available
Optional
SupportedEnvironments& Emulations
IBM AFP via PSF, MVS, PSF/VM,
PSF/VSE, PSF/400, PSF/AIX,PSF/OS/390, Infoprint Managerfor AIX, Infoprint Manager forWindows
Native IPDS (Type 4)
3800 Mod 3 Line Mode
Optional data stream supporto via Emtex
LCDSAFPDS
o via FreeFlow DocuSPVIP Server
PS3PCL5ePCL6PDFTIFFASCIIVIPPPPML
Xerox 650/1300 CF printer has notbeen validated with all front-ends.When using non-validated front-ends there is a chance that thecustomer may run into problems,which would probably requiresupport from the front-end vendor.
DocumentSubmission(Host)
DocumentSubmission(FreeFlowDocuSPOption)
Through host (IP Manager etc.)
FreeFlow Makeready
FreeFlow Print Manager
PC applications with XeroxCentreware Services
Lp/lpr
- Printers are installed as anIBM Type 4 printer
- FreeFlow DocuSP set up asa standard network printer
5/27/2018 Xerox 650_1300 CED v2.00
17/26
Customer Expectations Document 17
14 Optional Digi tal Front End (DFE) FreeFlowTMDocuSP
FreeFlow DocuSP Workflow
The workflow is developed around the Xerox Document Services Platform (FreeFlow DocuSP)technology, a very stable technology that has been developed over the years and installed in
thousands of Xerox devices worldwide. This will allow training simplicity for current FreeFlowDocuSP operators.
The FreeFlow DocuSP controls all aspects of the system RIPping and printing. DPCF-Pubpage imposition helps eliminate issue of creating multiple versions of print files when printing toan integrated cut-sheet and continuous feed environment.
The FreeFlow DocuSP platform is based on SUN technology supported using the SolarisOperating System.
One FreeFlow DocuSP is required per duplex printing system or running one engine in simplexmode. Two FreeFlow DocuSP DFEs are required if configuring a duplex printing system to rundual simplex.
Key features of FreeFlow DocuSP include:
Page Parallel RIPping(PPR) support for PostScript and PDF Adobe Document StructuringConventions (DSC) compliant and page independent files for optimum performance
Simplified user screens with an easy to use GUI
Job management: ability to manage all jobs (active and inactive) from a single screen in asingle queue
Administrator screens for full system control and management
Improved security enhancements and image quality options
Support of multiple data streams like PostScript, PDF, PCL, etc
Support of various industry standard network connectivity
Support of custom page imposition using Neptune features or pre-press applications
Item Xerox 650/1300 CF printer Comments
RasterImageProcessor(RIP)
Xerox FreeFlow DocuSP Platform:
X86 platform with four AMD Opteron,2.6 GHZ, dual core, 885 CPUs
16 GB of RAM
Three (3) 73 GB 10K RPM SCSI diskdrives
CD-RW/DVD-ROM drive17 LCD flat panel display, USB
Keyboard, USB MouseController stand
RIPResolution(set atFreeFlowDocuSP)
300 x 300 dpi 600 x 600 dpi
The processor can RIP (processimages for printing) at either 300X 300 DPI, 600 x 600 DPI.
Images RIPped at 300DPI willprovide faster performancewhen processing and will savefiles that are smaller in size.
The default setting for thesystem is 600 DPI.
HalftoneScreens
300dpi 54 lpi, 60 lpi, 85 lpi
600dpi 56 lpi, 60 lpi, 85 lpi (light,
normal, dark), 106 lpi (light, normal,dark), 125 lpi (light, normal, dark),134 lpi (light, normal, dark), 156 lpi(light, normal, dark)
125 lpi normal is the default
5/27/2018 Xerox 650_1300 CED v2.00
18/26
Customer Expectations Document 18
15 Print from Digital File (PDLs) & Host Printing
Configuration Supported File Formats Comments
Simplex orDuplexconfigurationsusing FreeFlowDocuSP option
PCL5e, PCL6
PostScript 3PDF
Saved Single Page TIFFASCIIVIPPPPML
Recommend FreeFlow DocuSP
common controller for printing ofPDL files.
Page Parallel RIPping (PPR)support for PostScript and PDFwith Adobe DSC compliant(page independent) files.
Simplex orDuplexconfigurationsfrom HostMainframe
Native IPDS data streamsupported on print engines
Line Mode
Optional DFEsLCDSAFPDS
Xerox Emtex VIP Server is used
exclusively for and limited toLCDS and AFPDS formats
Saving jobs
Jobs submitted electronically, either over the network or via portable media can be saved.
Both the RIPped (Raster Image Processed) image and the job ticket will be saved.
Jobs can be saved to the system disk or to any NFS-mounted drive.
5/27/2018 Xerox 650_1300 CED v2.00
19/26
Customer Expectations Document 19
16 Paper Specifications
Item Xerox 650/1300 CF printer Comments
InputCapacity
Maximum paper width for pin-fed or
pinless paper 19.5Minimum paper width for pin-fed
paper 6.5Minimum paper width for pinless
paper 8.0
Paper input is from 3rdparty
unwinder Box paper may be fed from a
stack or a splicing table forsimplex printing to the internalstacker only
InputWeightRange
Simplex Pin-fed
16 lb bond to 42 lb for Simplex (highspeed)(60 g/m to 160 g/m)
Duplex Pin-fed
16 lb bond to 42 lb(60 g/m to 160 g/m)
Simplex Pinless
17 lb bond to 53 (high or low speed)(64 g/m to 200 g/m)
Duplex Pinless
17 lb bond to 53(high or low speed)(64 g/m to 200 g/m)
Basis weight papers below or above
specification must be tested &validated.
FeedingSystem
From external third party solutions
PrintableArea3
Pin-fed
Width 18.5 (470mm) high quality
Pinless
Width 19.0 (483mm) maximum highquality area; 19.5 (495mm) includingthe mark print quality area
Maximum Length (with external postprocessing) is 28
- Maximum page image length is28, however external cuttingequipment can be set up to cut atlonger lengths for doing largesignatures
3In duplex pinfeed mode, limitations exist in a zone surrounding the registration and sheet id mark that could
conflict with data being printed. The limitations and workarounds are described in Appendix A.
5/27/2018 Xerox 650_1300 CED v2.00
20/26
Customer Expectations Document 20
17 Printer
A Xerographic monochrome (black and white) print engine with the key attributes:
Item Xerox 650/1300 CF printer Comments
PrinterResolution
240 x 240 dpi300 x 300 dpi600 x 600 dpi1200 x 600 dpi
Printer can accept 240dpi, 300dpi,and 600dpi resolution input datafiles.
RegistrationRegistration at up to 0.5 mm for bothFront to Back registration andalignment to pre-printed forms
Benchmark registration systemholds image to sheet alignment.The registration variance may belarger at startup.
5/27/2018 Xerox 650_1300 CED v2.00
21/26
Customer Expectations Document 21
18 Image Quality Expectations
Image Quality
Parameter
Xerox 650/1300 CF
printer
Comment
Text QualityBlack text quality is excellent forsizes as low as 4 point.
Line QualityThe Xerox 650/1300 CF printercan print solid lines all the waydown to 100 microns.
Area Coverage
The Xerox 650/1300 CFprinter uses automatedcontrols of toner,
development, tonereproduction, and theinternal environment toassure consistentprinting.
The printer has thecapability for very higharea coverage
The control system is designedto run within a specific range ofquality. Printer operators alsohave the ability to manuallyadjust lightness/darkness
controls from the printer GUI.Best print quality is achieved atarea coverage under 30%.NOTE:Some customer mightobserve a shift over time inimage darkness in shaded ordark images. Operator and / orservice adjustments might berequired to maintain darknessconsistency over time.
5/27/2018 Xerox 650_1300 CED v2.00
22/26
Customer Expectations Document 22
19 Pre & Post Finishing Devices
Xerox partners with its third party finishing vendors to provide the best pre/post finishing solutionfor the customers business and application requirements. Xerox utilizes the experience andexpertise of these vendors to recommend the right solution. Additional pre/post partners can be
certified.
Xerox will provide service on the pre/post finishing system as well as the print engines. The thirdparty finishing partner will provide second level and engineering support for their devices.
Third party finishing equipment must meet Xerox certification criteria for operability andserviceability. Xerox works directly with its finishing partners to test and certify their equipment,which must meet Xerox standards.
Pre and post finishing equipment is interfaced through Xerox PLB (print line bus) boxes. Thefinishing vendors will supply the cable required for the PLB to the Pre/Post devices. Direct Type-1connections are not supported.
VendorXerox 650 CF
Printer Pre/PostDevices
Lasermax Roll Systems
Web VisionUnwinder module LX555Web Buffer LX530Cutter LX562Stacker LX566Output Table
Hunkeler
Unwinder Module UW6
Rewinder Module RW6Vacuum Unit VU6Cross Cutter Module CS6Separating Unit SE6Stacker Module LS6Folder Stacker Module FS6Loop Control Unit LC6Unwinder Module UW4Rewinder Module RW4
5/27/2018 Xerox 650_1300 CED v2.00
23/26
Customer Expectations Document 23
20 System Product ivi ty: Xerox 650/1300 CF
Paper SizeSimplex sheets
printedDuplex sheets
printed
8.5 X 11 (2-up) 654 1309
8.5 X 14 (2-up) 514 1028
11 X 17 327 654
6 x 9 (2-up)
6 x 9 (3-up)1,200 2,400
A4 (210 x 297) (2-up) 616 1232
A3(297 x 420) 307 615
A5(148 x 210)(2-up)
A5(148 x 210)(3-up)
1,238
1,309
2,477
2,618
5/27/2018 Xerox 650_1300 CED v2.00
24/26
Customer Expectations Document 24
21 Appendix A
Specification of ROF mark location in Pinfed mode
Tandem Marks (ROF Mark + Sheet ID) should be placed in the large shaded are as indicated inthe illustration below on the left.
The Top of the ROF mark must be located between 10.16 and 127mm of the Top Page Boundary(process direction).
There should be no printing or any pre-printed marks in a region immediately above the ROFmark (process direction) and in a 0.3mm zone on either side of the mark extending above andbelow the mark as shown in the illustration below on the right.
Process direction
Top PageBoundary
10.16
Pageboundary
10.16
127.0
ROF Mark
Sheet ID
Unit: mmPaper width
4.160.3 0.3
Printing on print side
and on the other sideis inhibited in thisarea.
Mark
2.24
4.16
Markingarea forSheet ID
7.62
28.96
Pin hole center Pin hole center
5/27/2018 Xerox 650_1300 CED v2.00
25/26
Customer Expectations Document 25
22 Appendix B
Specification of ROF mark location in Pinless mode
Tandem Marks (ROF Mark + Sheet ID) should be placed in the large shaded area indicated in theillustration below on the left.
The Top of the ROF mark must be located between 10.16 and 127mm of the Top Page Boundary(process direction).
There should be no printing or any pre-printed marks in a region immediately above the ROFmark (process direction) and in a 0.3mm zone on either side of the mark extending above andbelow the mark as shown in the illustration below on the right.
-
Process direction
Top PageBoundary
10.16
PageBoundary
10.16
127.0
ROF Mark
Sheet ID
Unit: mmPaper width
0.97 0.97
Mark
5.080.3
7.62
0.3
Markingarea forSheet ID
31.79
Printing on printside and on theother side isinhibited in thisarea.
5/27/2018 Xerox 650_1300 CED v2.00
26/26
Customer Expectations Document 26
I have reviewed this document and understand the specifications listed:
________________________________________________Customer
________________________________________________Xerox Sales Representative
________________________________________________Xerox Service Representative (Only in USA)