Download pdf - PUB ISO 2014-09 - unms.sk · ISO 15512:2014 Plastics — Determination of water content D

Standards published New International Standards published between 01 September and 30 September 2014

* Available in English only

** French version of standard previously published in English only

Price group

IIW International Institute of Welding

ISO/TR 18786:2014 * Health and safety in welding — Guidelines for risk assessment of welding fabrication activities

C

TC 2 Fasteners

ISO 10664:2014 Hexalobular internal driving feature for bolts and screws D

ISO 1891-2:2014 * Fasteners — Terminology — Part 2: Vocabulary and definitions for coatings G

TC 4 Rolling bearings

ISO 492:2014 Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values

G

ISO 3290-1:2014 Rolling bearings — Balls — Part 1: Steel balls C

ISO 3290-2:2014 Rolling bearings — Balls — Part 2: Ceramic balls C

TC 8 Ships and marine technology

ISO 18611-1:2014 * Ships and marine technology — Marine NOx reduction agent AUS 40 — Part 1: Quality requirements

A

ISO 18611-2:2014 * Ships and marine technology — Marine NOx reduction agent AUS 40 — Part 2: Test methods

F

ISO 18611-3:2014 * Ships and marine technology — Marine NOx reduction agent AUS 40 — Part 3: Handling, transportation and storage

B

IEC/PAS 80005-3:2014

* Utility connections in port — Part 3: Low Voltage Shore Connection (LVSC) Systems — General requirements

F

TC 10 Technical product documentation

ISO 10628-1:2014 Diagrams for the chemical and petrochemical industry — Part 1: Specification of diagrams

C

TC 17 Steel

ISO 630-5:2014 * Structural steels — Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance

C

ISO 630-6:2014 * Structural steels — Part 6: Technical delivery conditions for seismic-proof improved structural steels for building

C

ISO 683-18:2014 * Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products

G

ISO 16143-1:2014 * Stainless steels for general purposes — Part 1: Corrosion-resistant flat products F

ISO 4995:2014 * Hot-rolled steel sheet of structural quality B

TC 22 Road vehicles

ISO 18541-1:2014 * Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 1: General information and use case definition

F

ISO 18541-2:2014 * Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 2: Technical requirements

E

ISO 18541-3:2014 * Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 3: Functional user interface requirements

C

ISO 15007-1:2002 Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 1: Definitions and parameters

B

TC 23 Tractors and machinery for agriculture and forestry

ISO 11783-12:2014 Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 12: Diagnostics services

E

TC 28 Petroleum products and lubricants

ISO/TR 19686-1:2014

* Petroleum products — Equivalency of test method determining the same property — Part 1: Atmospheric distillation of petroleum products

B

TC 29 Small tools

ISO 6103:2014 Bonded abrasive products — Permissible unbalances of grinding wheels as delivered — Static testing

D

TC 34 Food products

ISO 12228-2:2014 Determination of individual and total sterols contents — Gas chromatographic method — Part 2: Olive oils and olive pomace oils

C

ISO/TS 17383:2014 Determination of the triacylglycerol composition of fats and oils — Determination by capillary gas chromatography

C

TC 35 Paints and varnishes

ISO 2813:2014 Paints and varnishes — Determination of gloss value at 20 degrees, 60 degrees and 85 degrees

D

ISO 13803:2014 Paints and varnishes — Determination of haze on paint films at 20 degrees B

TC 39 Machine tools

ISO 14955-1:2014 Machine tools — Environmental evaluation of machine tools — Part 1: Design methodology for energy-efficient machine tools

F

ISO 230-10:2011/Amd 1:2014

Test code for machine tools — Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools — Amendment 1: Measuring performance with scanning probes

XZ

TC 42 Photography

ISO 18938:2014 * Imaging materials — Optical discs — Care and handling for extended storage D

TC 44 Welding and allied processes

ISO 25980:2014 Health and safety in welding and allied processes — Transparent welding curtains, strips and screens for arc welding processes

B

TC 45 Rubber and rubber products

ISO 6806:2014 Rubber hoses and hose assemblies for use in oil burners — Specification B

ISO 17324:2014 * Rubber hoses for automotive turbochargers — Specification C

ISO 27126:2014 * Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals — Specification

D

ISO 4097:2014 * Rubber, ethylene-propylene-diene (EPDM) — Evaluation procedure C

ISO 4659:2014 * Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) — Evaluation procedure

B

ISO 7663:2014 * Halogenated isobutene-isoprene rubber (BIIR and CIIR) — Evaluation procedures

B

ISO 2440:1997/Amd 2:2014

Flexible and rigid cellular polymeric materials — Accelerated ageing tests — Amendment 2

XZ

TC 61 Plastics

ISO 17541:2014 * Plastics — Quantitative evaluation of scratch-induced damage and scratch visibility

C

ISO 15512:2014 Plastics — Determination of water content D

ISO 22007-6:2014 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique

B

ISO 12000:2014 Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Definitions and review of test methods

A

ISO 19066-1:2014 Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications

B

TC 71 Concrete, reinforced concrete and pre-stressed concrete

ISO 19338:2014 * Performance and assessment requirements for design standards on structural concrete

B

TC 79 Light metals and their alloys

ISO 6361-2:2014 * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties

G

ISO 6361-3:2014 * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 3: Strips: Tolerances on shape and dimensions

A

ISO 6361-4:2014 * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 4: Sheets and plates: Tolerances on shape and dimensions

C

ISO 6362-2:2014 * Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and D

profiles — Part 2: Mechanical properties

ISO 6362-7:2014 * Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition

A

TC 85 Nuclear energy, nuclear technologies, and radiological protection

ISO 16641:2014 Measurement of radioactivity in the environment — Air — Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors

C

TC 106 Dentistry

ISO 16635-2:2014 Dentistry — Dental rubber dam instruments — Part 2: Clamp forceps A

TC 121 Anaesthetic and respiratory equipment

ISO 5359:2014 Anaesthetic and respiratory equipment — Low-pressure hose assemblies for use with medical gases

D

TC 127 Earth-moving machinery

ISO 17253:2014 * Earth-moving machinery and rough-terrain variable-reach trucks — Design requirements for machines intended to be driven on road

C

TC 131 Fluid power systems

ISO 16908:2014 Hydraulic filter element test methods — Thermal conditioning and cold start-up simulation

C

TC 147 Water quality

ISO 16308:2014 Water quality — Determination of glyphosate and AMPA — Method using high performance liquid chromatography (HPLC) with tandem mass spectrometric detection

D

ISO 9308-1:2014 Water quality — Enumeration of Escherichia coli and coliform bacteria — Part 1: Membrane filtration method for waters with low bacterial background flora

B

TC 150 Implants for surgery

ISO 12891-2:2014 * Retrieval and analysis of surgical implants — Part 2: Analysis of retrieved surgical implants

E

ISO 5832-4:2014 Implants for surgery — Metallic materials — Part 4: Cobalt-chromium-molybdenum casting alloy

A

ISO 5832-11:2014 Implants for surgery — Metallic materials — Part 11: Wrought titanium 6-aluminium 7-niobium alloy

A

TC 160 Glass in building

ISO 11485-3:2014 Glass in building — Curved glass — Part 3: Requirements for curved tempered and curved laminated safety glass

B

TC 164 Mechanical testing of metals

ISO 6506-1:2014 Metallic materials — Brinell hardness test — Part 1: Test method C

ISO 6506-2:2014 Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines

C

ISO 6506-3:2014 Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks

B

ISO 6506-4:2014 Metallic materials — Brinell hardness test — Part 4: Table of hardness values B

TC 171 Document management applications

ISO/TR 17797:2014 * Electronic archiving — Selection of digital storage media for long term preservation

D

ISO/TR 18160:2014 * Document management — Digital preservation — Analog recording to silver-gelatin microform

B

TC 172 Optics and photonics

ISO 14135-1:2014 * Optics and photonics — Specifications for telescopic sights — Part 1: General-purpose instruments

A

ISO 14135-2:2014 * Optics and photonics — Specifications for telescopic sights — Part 2: High-performance instruments

A

ISO 9345-2:2014 * Microscopes — Imaging distances related to mechanical reference planes — Part 2: Infinity-corrected optical systems

B

ISO 8598-1:2014 Optics and optical instruments — Focimeters — Part 1: General purpose instruments

E

ISO 11978:2014 Ophthalmic optics — Contact lenses and contact lens care products — Labelling B

ISO 11979-6:2014 Ophthalmic implants — Intraocular lenses — Part 6: Shelf-life and transport stability testing

B

ISO 14730:2014 Ophthalmic optics — Contact lens care products — Antimicrobial preservative efficacy testing and guidance on determining discard date

D

ISO 18259:2014 * Ophthalmic optics — Contact lens care products — Method to assess contact lens care products with contact lenses in a lens case, challenged with bacterial and fungal organisms

B

ISO/TS 19979:2014 * Ophthalmic optics — Contact lenses — Hygienic management of multipatient use trial contact lenses

B

IEC 80601-2-58:2014

* Medical electrical equipment — Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery

G

TC 173 Assistive products for persons with disability

ISO 7176-22:2014 Wheelchairs — Part 22: Set-up procedures E

TC 189 Ceramic tile

ISO 10545-1:2014 Ceramic tiles — Part 1: Sampling and basis for acceptance B

TC 190 Soil quality

ISO 14388-1:2014 Soil quality — Acid-base accounting procedure for acid sulfate soils — Part 1: Introduction and definitions, symbols and acronyms, sampling and sample

C

preparation

ISO 14388-2:2014 Soil quality — Acid-base accounting procedure for acid sulfate soils — Part 2: Chromium reducible sulfur (CRS) methodology

C

TC 193 Natural gas

ISO/TR 22302:2014 Natural gas — Calculation of methane number B

ISO 16960:2014 Natural gas — Determination of sulfur compounds — Determination of total sulfur by oxidative microcoulometry method

B

TC 194 Biological and clinical evaluation of medical devices

ISO 10993-3:2014 Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity

E

TC 195 Building construction machinery and equipment

ISO 18650-2:2014 Building construction machinery and equipment — Concrete mixers — Part 2: Procedure for examination of mixing efficiency

D

TC 201 Surface chemical analysis

ISO 17560:2014 * Surface chemical analysis — Secondary-ion mass spectrometry — Method for depth profiling of boron in silicon

B

TC 204 Intelligent transport systems

ISO/TS 21219-2:2014

* Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 2: UML modelling rules

F

TC 207 Environmental management

ISO/TS 14071:2014 Environmental management — Life cycle assessment — Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006

B

TC 212 Clinical laboratory testing and in vitro diagnostic test systems

ISO 15189:2012 * Medical laboratories — Requirements for quality and competence G

TC 213 Dimensional and geometrical product specifications and verification

ISO 16610-71:2014 Geometrical product specifications (GPS) — Filtration — Part 71: Robust areal filters: Gaussian regression filters

D

TC 215 Health informatics

ISO 17090-4:2014 * Health informatics — Public key infrastructure — Part 4: Digital Signatures for healthcare documents

D

ISO 22600-1:2014 Health informatics — Privilege management and access control — Part 1: Overview and policy management

E

ISO 22600-2:2014 Health informatics — Privilege management and access control — Part 2: Formal models

D

ISO 22600-3:2014 Health informatics — Privilege management and access control — Part 3: Implementations

G

TC 217 Cosmetics

ISO 17516:2014 Cosmetics — Microbiology — Microbiological limits A

TC 244 Industrial furnaces and associated processing equipment

ISO 13577-2:2014 * Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems

H

JTC 1 Information technology

ISO/IEC 8824-1:2008/Cor 2:2014

* Information technology — Abstract Syntax Notation One (ASN.1): Specification of basic notation — Part 1: — Technical Corrigendum 2

free

ISO/IEC 8824-4:2008/Cor 1:2014

* Information technology — Abstract Syntax Notation One (ASN.1): Parameterization of ASN.1 specifications — Part 4: — Technical Corrigendum 1

free

ISO/IEC 8825-1:2008/Cor 2:2014

* Information technology — ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) — Part 1: — Technical Corrigendum 2

free

ISO/IEC 8825-4:2008/Cor 2:2014

* Information technology — ASN.1 encoding rules: XML Encoding Rules (XER) — Part 4: — Technical Corrigendum 2

free

ISO/IEC 8825-5:2008/Cor 2:2014

* Information technology — ASN.1 encoding rules: Mapping W3C XML schema definitions into ASN.1 — Part 5: — Technical Corrigendum 2

free

ISO/IEC 17811-3:2014

* Information Technology — Device control and management — Part 3: Specification of Reliable Message Delivery Protocol

C

ISO/IEC 1539-1:2010/Cor 3:2014

* Information technology — Programming languages — Fortran — Part 1: Base language — Technical Corrigendum 3

free

ISO/IEC 18031:2011/Cor 1:2014

* Information technology — Security techniques — Random bit generation — Technical Corrigendum 1

free

ISO/IEC 19772:2009/Cor 1:2014

* Information technology — Security techniques — Authenticated encryption — Technical Corrigendum 1

free

ISO/IEC 27001:2013/Cor 1:2014

* Information technology — Security techniques — Information security management systems — Requirements — Technical Corrigendum 1

free

ISO/IEC 27002:2013/Cor 1:2014

* Information technology — Security techniques — Code of practice for information security controls — Technical Corrigendum 1

free

ISO/IEC 18000-7:2014

* Information technology — Radio frequency identification for item management — Part 7: Parameters for active air interface communications at 433 MHz

H

Standards confirmed The following International Standards are confimred for a five year period:

TC 2 Fasteners

ISO 1478:1999 (reconfirmed)






ISO 4042:1999

TC 5 Ferrous metal pipes and metallic fittings


ISO 7005-2:1988 (reconfirmed)


TC 6 Paper, board and pulps

ISO 8791-3:2005

TC 8 Ships and marine technology


TC 20 Aircraft and space vehicles








TC 22 Road vehicles





TC 23 Tractors and machinery for agriculture and forestry

ISO 789-12:2000



TC 24 Particle characterization including sieving

ISO 13317-1:2001

ISO 13318-1:2001

ISO 15900:2009

ISO 15901-3:2007

ISO 21501-2:2007

ISO 21501-3:2007

TC 28 Petroleum products and lubricants


TC 29 Small tools

ISO 13942:2000





TC 30 Measurement of fluid flow in closed conduits



TC 34 Food products

ISO 659:2009


ISO 5764:2009
















ISO 22935-1:2009

ISO 22935-2:2009

ISO 22935-3:2009

ISO 26323:2009

ISO/TS 19036:2006 (reconfirmed)

ISO 5983-2:2009

TC 35 Paints and varnishes

ISO 11998:2006



TC 36 Cinematography



TC 38 Textiles


ISO 105-F10:1989 (reconfirmed)

ISO 7768:2009

ISO 7769:2009

ISO 7770:2009

TC 39 Machine tools

ISO 230-3:2007

TC 44 Welding and allied processes

ISO 5173:2009

ISO 14327:2004


ISO/TR 17671-2:2002

ISO 9455-17:2002




ISO 1402:2009

ISO 1436:2009


ISO 3949:2009

ISO 4023:2009

ISO 4079:2009

ISO 4080:2009



ISO 8031:2009







ISO 1658:2009

ISO 2006-1:2009

ISO 2006-2:2009


ISO 2930:2009


ISO 6209:2009





ISO/TS 16176:2011










ISO 25518:2009

TC 46 Information and documentation

ISO 8459:2009

ISO 28500:2009

TC 47 Chemistry

ISO 11014:2009

TC 58 Gas cylinders

ISO 25760:2009

TC 59 Buildings and civil engineering works


TC 61 Plastics

ISO 10093:1998


ISO 16770:2004

TC 69 Applications of statistical methods



TC 71 Concrete, reinforced concrete and pre-stressed concrete






TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use

ISO 8536-3:2009

TC 86 Refrigeration and air-conditioning

ISO/R 916:1968 (reconfirmed)

TC 94 Personal safety -- Protective clothing and equipment

ISO 13982-2:2004

ISO 16602:2007

TC 98 Bases for design of structures

ISO 4354:2009

TC 100 Chains and chain sprockets for power transmission and conveyors


TC 106 Dentistry

ISO 4049:2009


ISO/TS 14569-2:2001

(reconfirmed)

TC 108 Mechanical vibration, shock and condition monitoring

ISO 19499:2007


ISO 2631-

1:1997/Amd 1:2010


TC 110 Industrial trucks


TC 113 Hydrometry


TC 117 Fans

ISO 27327-1:2009

TC 118 Compressors and pneumatic tools, machines and equipment


TC 119 Powder metallurgy

ISO 2740:2009

ISO 3327:2009

TC 122 Packaging











TC 126 Tobacco and tobacco products




TC 138 Plastics pipes, fittings and valves for the transport of fluids


ISO 18672-1:2009

TC 146 Air quality

ISO 15767:2009


ISO 16000-14:2009

TC 147 Water quality

ISO/TS 20612:2007 (reconfirmed)




TC 153 Valves


TC 156 Corrosion of metals and alloys












TC 163 Thermal performance and energy use in the built environment


TC 165 Timber structures


TC 171 Document management applications

ISO 11506:2009


ISO 10110-8:2010

ISO 10935:2009



TC 174 Jewellery


TC 190 Soil quality




TC 192 Gas turbines

ISO 21789:2009

TC 201 Surface chemical analysis

ISO 23812:2009

TC 206 Fine ceramics










ISO 26423:2009


ISO/IEC 11801:2002

ISO/IEC 19793:2008

ISO/IEC 19796-3:2009

Standards withdrawn Period from 01 September to 30 September 2014

TC 10 Technical product documentation

ISO 10628:1997 (replaced by ISO 10628-1:2014, ISO 10628-2:2012)

TC 17 Steel

ISO 4952:2006 (replaced by ISO 630-5:2014)


TC 20 Aircraft and space vehicles

ISO/PAS 21100:2011 (replaced by ISO 21100:2014)

TC 34 Food products

ISO 12228:1999 (replaced by ISO 12228-1:2014, ISO 12228-2:2014)

TC 61 Plastics

ISO 10366-1:2002 (replaced by ISO 19066-1:2014)



TC 215 Health informatics

ISO/TS 22600-1:2006 (replaced by ISO 22600-1:2014)



Meeting calendar (update at 01 September 2014)

Meetings called for the month of August are not in this edition.

* Information definite but meeting not yet formally convened

** Provisional

September-November 2014

4-4 Beijing (China) TC 83 Sports and other recreational facilities and equipment

September-October 2014

22-3

Salamanca (Spain) JTC 1/SC 17 Information technology/Cards and personal identification

29- Berlin (Germany) PC 272 Forensic sciences

2

29-3

Bad Kohlgrub (Germany)

TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices

29-3

Paris (France) TC 218 Timber

30-1

London (United Kingdom)

PC 286 Collaborative business relationship management -- Framework

30-3

Fortaleza (Brazil) TC 28 Petroleum products and lubricants

October 2014

1 Fortaleza (Brazil) TC 28/SC 4 Petroleum products and lubricants/Classifications and specifications

1 Fortaleza (Brazil) TC 28/SC 7 Petroleum products and lubricants/Liquid Biofuels

1 Milan (Italy) TC 39/SC 4 Machine tools/Woodworking machines

3 Colombo (Sri Lanka)

JTC 1/SC 2 Information technology/Coded character sets

3 Paris (France) TC 86/SC 1 Refrigeration and air-conditioning/Safety and environmental requirements for refrigerating systems

3 Paris (France) TC 86/SC 8 Refrigeration and air-conditioning/Refrigerants and refrigeration lubricants

6 Seattle (USA) JTC 1/SC 31 Information technology/Automatic identification and data capture techniques

6 Genoa (Italy) TC 8/SC 12 Ships and marine technology/Ships and marine technology - Large yachts

6 Bremen (Germany) TC 20/SC 6 Aircraft and space vehicles/Standard atmosphere

6-8 Bremen (Germany) TC 20 Aircraft and space vehicles

6-10

Sao Paulo (Brazil) JTC 1/SC 38 Information technology/Distributed application platforms and services (DAPS)

6-10

Berlin (Germany) TC 215 Health informatics

6-11

Prague (Czech Republic)

TC 135 Non-destructive testing

8 Virtual (Unknown) President's committee

President's committee

8 Hamburg (Germany)

TC 8/SC 7 Ships and marine technology/Inland navigation vessels

8 San Antonio (USA) TC 70 Internal combustion engines

8 Vienna (Austria) TC 138/SC 6 Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for all applications

8-9 San Antonio (USA) TC 70/SC 8 Internal combustion engines/Exhaust gas emission measurement

8-10


TC 25 Cast irons and pig irons

9 Beijing (China) TC 180/SC 1 Solar energy/Climate - Measurement and data

9 Beijing (China) TC 180/SC 4 Solar energy/Systems - Thermal performance, reliability and durability

9-10

Bremen (Germany) TC 20/SC 4 Aircraft and space vehicles/Aerospace fastener systems

10 Tokyo (Japan) TC 17/SC 7 Steel/Methods of testing (other than mechanical tests and chemical analysis)

10 Copenhagen (Denmark)

TC 34/SC 18 Food products/Cocoa

10 Paris (France) TC 92/SC 1 Fire safety/Fire initiation and growth

10 Beijing (China) TC 180 Solar energy

13-14

Troy (USA) TC 22/SC 11 Road vehicles/Safety glazing materials

13-15

Miami (USA) TC 44/SC 3 Welding and allied processes/Welding consumables

13-15

Antigua (Guatemala)

TC 285 Clean cookstoves and clean cooking solutions

13-16

Tromsø (Norway) TC 67/SC 8 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Arctic operations

13-17


TC 131 Fluid power systems

13-17

Kuala Lumpur (Malaysia)

TC 181 Safety of toys

14-16

Suzhou (China) TC 164/SC 5 Mechanical testing of metals/Fatigue testing

14-17

Buenos Aires (Argentina)

TC 279 Innovation management

15 Suzhou (China) TC 164/SC 1 Mechanical testing of metals/Uniaxial testing

15 Suzhou (China) TC 164/SC 4 Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)

15-16

Pirmasens (Germany)

TC 137 Footwear sizing designations and marking systems

15-17

Toronto (Canada) TC 212 Clinical laboratory testing and in vitro diagnostic test systems

16 Suzhou (China) TC 164/SC 3 Mechanical testing of metals/Hardness testing

16 Pirmasens (Germany)

TC 216 Footwear

16-17

Praha (Czech Republic)

TC 58/SC 2 Gas cylinders/Cylinder fittings

16-17

Suzhou (China) TC 164/SC 2 Mechanical testing of metals/Ductility testing

17 Tokyo (Japan) TC 22/SC 7 Road vehicles/Injection equipment and filters for use on road vehicles

17 London (United Kingdom)

TC 131/SC 5 Fluid power systems/Control products and components


TC 131/SC 9 Fluid power systems/Installations and systems

17 Seoul (Korea, Republic of)

TC 153 Valves


TC 153/SC 1 Valves/Design, manufacture, marking and testing

20-21

Seoul (Korea, Republic of)

TC 209 Cleanrooms and associated controlled environments

20-22

Liège (Belgium) TC 266 Biomimetics

20-23

Tokyo (Japan) TC 23/SC 17 Tractors and machinery for agriculture and forestry/Manually portable forest machinery

20-24


JTC 1/SC 6 Information technology/Telecommunications and information exchange between systems

20-24

Mexico City (Mexico)

JTC 1/SC 27 Information technology/IT Security techniques

20-24

Strasbourg (France) JTC 1/SC 29 Information technology/Coding of audio, picture, multimedia and hypermedia information

20-24

Prague (Czech Republic)

TC 121/SC 6 Anaesthetic and respiratory equipment/Medical gas systems

20-24

Nunspeet (Netherlands)

TC 149/SC 1 Cycles/Cycles and major sub-assemblies

20-24

Incheon (Korea, Republic of)

TC 154 Processes, data elements and documents in commerce, industry and administration

20-24

St. Petersburg, Florida (USA)

TC 188/SC 1 Small craft/Personal safety equipment

20-24

Berlin (Germany) TC 190 Soil quality

20-24

Berlin (Germany) TC 190/SC 1 Soil quality/Evaluation of criteria, terminology and codification

20-24

Berlin (Germany) TC 190/SC 2 Soil quality/Sampling

20-24

Berlin (Germany) TC 190/SC 3 Soil quality/Chemical methods and soil characteristics

20- Berlin (Germany) TC 190/SC 4 Soil quality/Biological methods

24

20-24

Berlin (Germany) TC 190/SC 7 Soil quality/Soil and site assessment


TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (including land drainage)

21 Virtual (Unknown) TC 173/SC 2 Assistive products for persons with disability/Classification and terminology

21-23


TC 58/SC 3 Gas cylinders/Cylinder design

22 Vienna (Austria) TC 123/SC 2 Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing conditions

22 Vienna (Austria) TC 123/SC 3 Plain bearings/Dimensions, tolerances and construction details


TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies


TC 138/SC 4 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply of gaseous fuels

22-23

Paris (France) TC 22/SC 9 Road vehicles/Vehicle dynamics and road-holding ability

23 Vienna (Austria) TC 123/SC 5 Plain bearings/Quality analysis and assurance

23 Vienna (Austria) TC 123/SC 6 Plain bearings/Terms and common items


TC 138/SC 3 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial applications


TC 138/SC 5 Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications


TC 138/SC 7 Plastics pipes, fittings and valves for the transport of fluids/Valves and auxiliary equipment of plastics materials


TC 138/SC 8 Plastics pipes, fittings and valves for the transport of fluids/Rehabilitation of pipeline systems

23-24


TC 58 Gas cylinders

23-24

Tokyo (Japan) TC 79/SC 2 Light metals and their alloys/Organic and anodic oxidation coatings on aluminium

23-24

Pretoria (South Africa)

TC 178 Lifts, escalators and moving walks

24 Sydney (Australia) TC 92/SC 3 Fire safety/Fire threat to people and environment

24 Sydney (Australia) TC 92/SC 4 Fire safety/Fire safety engineering

24 Vienna (Austria) TC 123 Plain bearings

24 Vienna (Austria) TC 123/SC 7 Plain bearings/Special types of plain bearings


TC 138 Plastics pipes, fittings and valves for the transport of fluids

24 Paris (France) TC 227 Springs

27 Panama (Panama) TC 8/SC 6 Ships and marine technology/Navigation and ship operations

27 Panama (Panama) TC 8/SC 11 Ships and marine technology/Intermodal and Short Sea Shipping

27 Panama (Panama) TC 8/SC 13 Ships and marine technology/Marine technology

27-29


PC 280 Management Consultancy

27-30

St-Louis (USA) JTC 1/SC 22 Information technology/Programming languages, their environments and system software interfaces

27-31

Panama (Panama) TC 8 Ships and marine technology

27-31

Vancouver (Canada)

TC 204 Intelligent transport systems

27-31

Berlin (Germany) TC 264 Fireworks

28 Toronto (Canada) TC 59/SC 8 Buildings and civil engineering works/Sealants

28 Vienna (Austria) TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium

28-29

New York (USA) TC 5 Ferrous metal pipes and metallic fittings

28-29

Berlin (Germany) TC 23/SC 3 Tractors and machinery for agriculture and forestry/Safety and comfort

28-29

Paris (France) TC 290 Online reputation

28-30

Sydney (Australia) TC 17/SC 1 Steel/Methods of determination of chemical composition

29 Toronto (Canada) TC 59/SC 14 Buildings and civil engineering works/Design life

29 Toronto (Canada) TC 59/SC 15 Buildings and civil engineering works/Performance description of houses

29 Vienna (Austria) TC 79 Light metals and their alloys


TC 104/SC 2 Freight containers/Specific purpose containers

29-31

Tokyo (Japan) TC 20/SC 10 Aircraft and space vehicles/Aerospace fluid systems and components

31 Toronto (Canada) TC 59/SC 2 Buildings and civil engineering works/Terminology and harmonization of languages

31 Toronto (Canada) TC 59/SC 17 Buildings and civil engineering works/Sustainability in buildings and civil engineering works

November 2014

1 Toronto (Canada) TC 59 Buildings and civil engineering works

1 Toronto (Canada) TC 59/SC 3 Buildings and civil engineering works/Functional/user requirements and performance in building construction

1 Toronto (Canada) TC 59/SC 13 Buildings and civil engineering works/Organization of information about construction works

2-7 Belfort (France) TC 184/SC 4 Automation systems and integration/Industrial data

3-4 Tel Aviv (Israel) TC 282/SC 1 Water re-use/Treated wastewater re-use for Irrigation

3-5 Madrid (Spain) PC 252 Natural gas fuelling stations for vehicles

3-5 Washington, D.C (USA)

TC 241 Road traffic safety management systems

3-7 Singapore (Singapore)

PC 277 Sustainable procurement

3-7 Cape Town (South Africa)



TC 45/SC 1 Rubber and rubber products/Rubber and plastics hoses and hose assemblies


TC 45/SC 2 Rubber and rubber products/Testing and analysis

3-7 Wuhan (China) TC 183 Copper, lead, zinc and nickel ores and concentrates

3-7 New Delhi (India) TC 229 Nanotechnologies

3-7 Lisbon (Portugal) TC 282 Water re-use

5-6 Lisbon (Portugal) TC 34/SC 4 Food products/Cereals and pulses

5-6 Tel Aviv (Israel) TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems

6 Cape Town (South Africa)

TC 45/SC 4 Rubber and rubber products/Products (other than hoses)

6 Istanbul (Turkey) TC 270 Plastics and rubber machines

7 San Diego (USA) TC 22/SC 10 Road vehicles/Impact test procedures

7 San Diego (USA) TC 22/SC 12 Road vehicles/Passive safety crash protection systems


TC 45/SC 3 Rubber and rubber products/Raw materials (including latex) for use in the rubber industry

10-11

Edinburgh (United Kingdom)

TC 171/SC 2 Document management applications/Application issues

11-14

Ottawa (Canada) TC 244 Industrial furnaces and associated processing equipment

12 LEMONT (USA) TC 22/SC 3 Road vehicles/Electrical and electronic equipment

13-14

Berlin (Germany) TC 182/SC 1 Geotechnics/Geotechnical investigation and testing

14-20

Beijing (China) TC 130 Graphic technology

15-20

Abu Dhabi (United Arab Emirates)


17-21

Florida (USA) TC 108/SC 2 Mechanical vibration, shock and condition monitoring/Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures

18-20

Madrid (Spain) TC 34/SC 7 Food products/Spices, culinary herbs and condiments

19 Trondheim (Norway)

TC 234 Fisheries and aquaculture

19-21

Delft (Netherlands) TC 23/SC 13 Tractors and machinery for agriculture and forestry/Powered lawn and garden equipment

20 Virtual (Unknown) CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)

24-28

Paris (France) PC 287 Chain of custody of wood and wood-based products

24-28

Shenzen (China) TC 211 Geographic information/Geomatics

26-28

Frankfurt (Germany)

* TC 184/SC 1 Automation systems and integration/Physical device control


TC 158 Analysis of gases

December 2014

1-4 Copenhagen (Denmark)

TC 98 Bases for design of structures

1-5 Dublin (Ireland) TC 260 Human resource management

3-5 Tokyo (Japan) TC 232 Learning services outside formal education

3-5 Paris (France) TC 269 Railway applications

4-5 Fukuoka (Japan) TC 197 Hydrogen technologies

8-10


TC 147/SC 3 Water quality/Radioactivity measurements

9-12

Madrid (Spain) PC 273 Customer contact centres

17 Frankfurt (Germany)

TC 291 Domestic gas cooking appliances


TC 98/SC 2 Bases for design of structures/Reliability of structures


TC 98/SC 3 Bases for design of structures/Loads, forces and other actions

January 2015

12-16

Weinheim (Germany)

* TC 69/SC 4 Applications of statistical methods/Applications of statistical methods in process management

19-20

Toledo (Spain) JTC 1/SC 37 Information technology/Biometrics

19-23

Copenhagen (Denmark)

* JTC 1/SC 35 Information technology/User interfaces

22-23

Cape Town (South Africa)

* TC 44/SC 8 Welding and allied processes/Equipment for gas welding, cutting and allied processes

25-29

Foshan (China) TC 107 Metallic and other inorganic coatings

25-29

Foshan (China) ** TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes

25-29

Foshan (China) ** TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings

February 2015

2-5 Beijing (China) TC 257 Evaluation of energy savings

3-13


* TC 213 Dimensional and geometrical product specifications and verification

11 Geneva (Switzerland)

* CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)

22-23

Miami (USA) * TMB Technical Management Board

St. Petersburg, Florida (USA)

** TC 115 Pumps

March 2015

9-13

(Unknown) ** TC 110/SC 4 Industrial trucks/Rough-terrain trucks

9-13

Morioka (Japan) * TC 223 Societal security

12 West Conshohocken (Philadelphia) (USA)

TC 221 Geosynthetics

17- Geneva * COUNCIL Council

18 (Switzerland)

23-27

Vienna (Austria) * JTC 1/SC 38 Information technology/Distributed application platforms and services (DAPS)

Rio de Janeiro (Brazil)

** PC 287 Chain of custody of wood and wood-based products

March-June 2015

25-26

Nara (Japan) * TC 184 Automation systems and integration

March-April 2015

31-2

Montreal (Canada) * TC 20/SC 9 Aircraft and space vehicles/Air cargo and ground equipment

1st Quarter 2015

(United Kingdom) ** PC 284 Management system for private security operations - Requirements with guidance

Paris (France) * TC 24/SC 4 Particle characterization including sieving/Particle characterization

Foshan (China) ** TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)

Foshan (China) ** TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests

April 2015

13-14

Lyon (France) TC 117 Fans

13-17

Tienjin (China) ** TC 161 Control and protective devices for gas and/or oil burners and appliances

13-17

(Czech Republic) ** TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators

20-24

San Francisco (USA)

* TC 215 Health informatics

21-22

(Kazakhstan) ** TC 67/SC 2 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Pipeline transportation systems

23 Düsseldorf (Germany)

* TC 44/SC 11 Welding and allied processes/Qualification requirements for welding and allied processes personnel

24 Atlanta (USA) ** TC 6/SC 2 Paper, board and pulps/Test methods and quality specifications for paper and board

25 Atlanta (USA) ** TC 6 Paper, board and pulps

(France) ** TC 29 Small tools

(France) ** TC 29/SC 9 Small tools/Tools with defined cutting edges, cutting items

(USA) ** TC 34/SC 15 Food products/Coffee

May 2015

1-7 (United Kingdom) ** TC 67/SC 4 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment

4-7 Toronto (Canada) * TC 68 Financial services

4-8 Kuching (Malaysia) ** JTC 1/SC 27 Information technology/IT Security techniques

4-8 (Unknown) ** TC 36 Cinematography

8-15

Tokyo (Japan) ** TC 10 Technical product documentation

11-12

Kuching (Malaysia) * JTC 1/SC 27 Information technology/IT Security techniques

11-15

Ohio (USA) ** TC 184/SC 5 Automation systems and integration/Interoperability, integration, and architectures for enterprise systems and automation applications

11-16

Bologna (Italy) ** TC 130 Graphic technology

12-15


** TC 156 Corrosion of metals and alloys

13 Paris (France) ** TC 87 Cork

18-22

(Brazil) ** JTC 1/SC 40 Information technology/IT Service Management and IT Governance

18-22


** TC 4 Rolling bearings

18-22

Chengdu (China) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

18-22

Luzern (Switzerland)

* TC 114 Horology


* TC 228 Tourism and related services

26-29

(Argentina) ** TC 85/SC 5 Nuclear energy, nuclear technologies, and radiological protection/Nuclear fuel cycle


** TC 67/SC 5 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe

Glasgow, Scotland (United Kingdom)

** JTC 1/SC 32 Information technology/Data management and interchange

8-15

Tokyo (Japan) ** TC 10/SC 1 Technical product documentation/Basic conventions

8-15

Tokyo (Japan) ** TC 10/SC 6 Technical product documentation/Mechanical engineering documentation

8-15

Tokyo (Japan) ** TC 10/SC 10 Technical product documentation/Process plant documentation

Madrid (Spain) ** TC 23/SC 18 Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems

Tokyo (Japan) ** TC 113 Hydrometry

Tokyo (Japan) ** TC 113/SC 1 Hydrometry/Velocity area methods

Tokyo (Japan) ** TC 113/SC 2 Hydrometry/Flow measurement structures

Tokyo (Japan) ** TC 113/SC 5 Hydrometry/Instruments, equipment and data management

Tokyo (Japan) ** TC 113/SC 6 Hydrometry/Sediment transport

Tokyo (Japan) ** TC 113/SC 8 Hydrometry/Ground water


** TC 131/SC 6 Fluid power systems/Contamination control

June 2015

1-5 Sapporo (Japan) ** TC 42 Photography

1-5 Seattle (USA) * TC 43/SC 3 Acoustics/Underwater acoustics

1-6 Philadelphia (USA) ** TC 147 Water quality

3-5 (Japan) ** TC 145 Graphical symbols

8-12

Berlin (Germany) ** TC 121 Anaesthetic and respiratory equipment

9-12

Pretoria (South Africa)

** REMCO Committee on reference materials

10-11

(France) ** TC 17/SC 9 Steel/Tinplate and blackplate

15-19

Vancouver (Canada)

** TC 22/SC 13 Road vehicles/Ergonomics applicable to road vehicles

17-18

Geneva (Switzerland)

* TMB Technical Management Board

18-19

Frankfurt (Germany)

* TC 184/SC 2 Automation systems and integration/Robots and robotic devices

21-26

Matsue (Japan) ** TC 37 Terminology and other language and content resources

22-25

Avignon (France) * TC 54 Essential oils

22-26

(Netherlands) ** TC 34/SC 9 Food products/Microbiology

22-26

(China) ** TC 69 Applications of statistical methods

22- Göteborg (Sweden) * TC 188 Small craft

26

Matsue (Japan) ** JTC 1/SC 28 Information technology/Office equipment

(Australia) ** JTC 1/SC 36 Information technology/Information technology for learning, education and training

Zurich (Switzerland) ** TC 17/SC 17 Steel/Steel wire rod and wire products

Beijing (China) ** TC 46 Information and documentation

Mexico City (Mexico)

** TC 242 Energy Management

(Unknown) ** TC 268/SC 1 Sustainable development in communities/Smart community infrastructures

June-July 2015

30-3

(Cyprus) ** TC 193 Natural gas

30-3

(Cyprus) ** TC 193/SC 3 Natural gas/Upstream area

2nd Quarter 2015

(Europe) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Protective clothing

Istanbul (Turkey) ** TC 120 Leather

(China) ** TC 172/SC 7 Optics and photonics/Ophthalmic optics and instruments

Vico Equense (Italy) ** TC 184/SC 4 Automation systems and integration/Industrial data

1st Semester 2015


** TC 8/SC 8 Ships and marine technology/Ship design

(USA) ** TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres

July 2015

1-7 Berlin (Germany) * TC 91 Surface active agents

(USA) ** TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps

August 2015

26-28

Jeju (Korea, Republic of)

* TC 206 Fine ceramics

August-September 2015

31-4

Hokaido (Japan) * JTC 1/SC 35 Information technology/User interfaces

September 2015

1-6 (Canada) ** TC 163 Thermal performance and energy use in the built environment

1-6 (Canada) ** TC 205 Building environment design

7-14

Sydney (Australia) ** TC 96 Cranes

13-17

Lahaina, Hawaii (USA)

** TC 127 Earth-moving machinery

14-25

Berlin (Germany) * TC 213 Dimensional and geometrical product specifications and verification

15-16


* TMB Technical Management Board

16-18


* GA General Assembly

17-18

Moscow (Russian Federation)

** TC 197 Hydrogen technologies


** COUNCIL Council

Vienna (Austria) ** TC 33 Refractories

Paris (France) ** TC 34/SC 17 Food products/Management systems for food safety

(Japan) ** TC 133 Clothing sizing systems - size designation, size measurement methods and digital fittings

Seattle (USA) ** TC 201/SC 6 Surface chemical analysis/Secondary ion mass spectrometry

(Netherlands) ** TC 258 Project, programme and portfolio management

2nd-3rd Quarter 2015

(Europe) ** TC 126/SC 1 Tobacco and tobacco products/Physical and dimensional tests

October 2015

15-17

Seattle (USA) * TC 201 Surface chemical analysis

19-23

(Germany) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

26-30

New Delhi (India) * JTC 1/SC 27 Information technology/IT Security techniques

28-30

Tsukuba (Japan) ** TC 202 Microbeam analysis

Madrid (Spain) ** TC 10/SC 8 Technical product documentation/Construction documentation

(Netherlands) ** TC 34/SC 2 Food products/Oleaginous seeds and fruits and oilseed meals

(Netherlands) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils

Nairobi (Kenya) ** TC 38 Textiles

Nairobi (Kenya) ** TC 38/SC 1 Textiles/Tests for coloured textiles and colorants

Nairobi (Kenya) ** TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests

Nairobi (Kenya) ** TC 38/SC 23 Textiles/Fibres and yarns

Nairobi (Kenya) ** TC 38/SC 24 Textiles/Conditioning atmospheres and physical tests for textile fabrics

Sao Paulo (Brazil) ** TC 58/SC 2 Gas cylinders/Cylinder fittings

Madrid (Spain) ** TC 59/SC 16 Buildings and civil engineering works/Accessibility and usability of the built environment

(USA) ** TC 92 Fire safety

Santiago (Chile) ** TC 195 Building construction machinery and equipment

November 2015

9-12

(Spain) ** TC 189 Ceramic tile

(China) ** JTC 1 Information technology

4th Quarter 2015

Dayton, Ohio (USA) ** TC 159/SC 3 Ergonomics/Anthropometry and biomechanics

(China) ** TC 282 Water re-use

2nd Semester 2015

(Europe) ** TC 126/SC 2 Tobacco and tobacco products/Leaf tobacco

(USA) ** TC 184/SC 4 Automation systems and integration/Industrial data

Month unknown 2015

Brussels (Belgium) ** TC 23 Tractors and machinery for agriculture and forestry

(Brazil) ** TC 23/SC 17 Tractors and machinery for agriculture and forestry/Manually portable forest machinery

(USA) ** TC 27 Solid mineral fuels

(Finland) ** TC 44 Welding and allied processes

(France) ** TC 45 Rubber and rubber products

Berlin (Germany) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids

(Japan) ** TC 142 Cleaning equipment for air and other gases

(China) ** TC 155 Nickel and nickel alloys

(United Kingdom) ** TC 164 Mechanical testing of metals

(Austria) ** TC 190 Soil quality

(China) ** TC 274 Light and lighting

January 2016

(China) ** TC 120 Leather

February 2016

(USA) ** TC 213 Dimensional and geometrical product specifications and verification

April 2016


** TC 161 Control and protective devices for gas and/or oil burners and appliances

(Australia) ** TC 178 Lifts, escalators and moving walks

May 2016

(Brazil) ** TC 67/SC 4 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment

(India) ** TC 85 Nuclear energy, nuclear technologies, and radiological protection

June 2016

(Germany) ** JTC 1/SC 36 Information technology/Information technology for learning, education and training

1st Semester 2016

(China) ** TC 34/SC 16 Food products/Horizontal methods for molecular biomarker analysis

October 2016

(Korea, Republic of) ** TC 201 Surface chemical analysis

November 2016

(Norway) ** JTC 1 Information technology

Month unknown 2016

(Korea, Republic of) ** JTC 1/SC 23 Information technology/Digitally Recorded Media for Information Interchange and Storage

(Russian Federation)

** REMCO Committee on reference materials

(Denmark) ** TC 37 Terminology and other language and content resources

(Australia) ** TC 44 Welding and allied processes

(Malaysia) ** TC 45 Rubber and rubber products

Wellington (New Zealand)

** TC 46 Information and documentation

(Sweden) ** TC 102 Iron ore and direct reduced iron

(China) ** TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies

June 2017

(Australia) ** JTC 1/SC 36 Information technology/Information technology for learning, education and training

June 2018

(Korea, Dem. P. Rep. of)

** JTC 1/SC 36 Information technology/Information technology for learning, education and training