Steam Injectors / Eductors

Steam Coolers

To inject steam into liquids we have different solutions in our program.Steam can be fed directly into a pipe through which flows the medium. Here our types RKE, RFF, RLF and our multi-level models are used.

Furthermore, it is possible to directly inject steam into a vessel.Here our types IFF, ILF, IGE, IFA and IFM are used.The differences concern mostly the different flange connections.

Purpose of Steam Injectors:Steam Injectors are often used to heat water or other liquid media in the production cycle. These Steam Heaters usually work in closed circuits, in tanks or other pipelines.Heating processes can find place in only one step or in closed circuits with a defined Start- and Final Temperature.

Pipeline MountingSteam Injectors can be mounted in pipelines with loose or fixed flanges according to DIN or ANSI-Standards, or in sanitary executions.

Mounting inside of a vesselKaempken & Fischer Steam Injectors also can be installed below liquid/water level to directly heat water or other water compatible liquid media inside containers, vessels or tanks.The steam will be quietly induced into the liquid and completely condensed.The suction effect of the injector causes a medium flow inside the vessel and this causes a uniform temperature inside the container.

Range of Application: Heating of liquid media Steam Spargers for Cycle-

water Cooling of steam Mixing of different media Feeding of Gases PE- PP- PVC- LLDPE-Plants Pulp + Paper Food, Wine, Beverage,

Pharmaceutical Educting of Antifouling

media Cooling of Extruders Feeding of additives

Advantages: Noiseless Injection of Steam Control range 0-100% of

Steam Minimum Pressure-loss Maximum Heat-Transfer Favourable Dimensions Mounting in optional

Positions High Operating-time,

Maintenance-free Wide Variety of Materials

Installation in a pipeline

RFF/RLF type

RFF type with PTFE-inlet

RKE type

RFF type 2-staged

RFF type 3-staged

Installation in a vessel

IFM type 3-staged

IFA type in PTFE

IFA type

IFF/ILF type

Our Steam Injectors also can be used as Steam Coolers.For this purpose, the steam is passed through the large opening and the cooling water is connected at the tangential connection. A small nozzle is integrated in the centerline which injects the cooling medium into the steam.

Kämpken & Fischer GmbH

If you still have questions do not hesitate to contact us:

Kämpken & Fischer GmbHGewerbegebiet OberheisterKupferfeld 7D-53819 Neunkirchen-SeelscheidGermany

Phone: +49 2247 / 6534Fax: +49 2247 / 74241E-Mail: info@kaempken.deWeb: www.kaempken.de