6
Fundamentals of EE II EE1302 Dr. Naser Al-Falahy University of Anbar College of Engineering Dept. of Electrical Engineering 82 WEEK 8 10.3 Mesh Analysis Kirchhoff’s voltage law (KVL) forms the basis of mesh analysis. The validity of KVL for ac circuits was shown in Section 9.6 and is illustrated in the following examples. Keep in mind that the very nature of using mesh analysis is that it is to be applied to planar circuits Example Determine Io current in the circuit of Fig. 10.7 using mesh analysis.

10.3 Mesh Analysis

  • Upload
    others

  • View
    6

  • Download
    0

Embed Size (px)

Citation preview

Page 1: 10.3 Mesh Analysis

Fundamentals of EE II

EE1302 Dr. Naser Al-Falahy

University of Anbar College of Engineering Dept. of Electrical Engineering

82

WEEK 8

10.3 Mesh Analysis

Kirchhoff’s voltage law (KVL) forms the basis of mesh analysis. The validity of KVL for ac circuits was shown in Section 9.6 and is illustrated in the following examples. Keep in mind that the very nature of using mesh analysis is that it is to be applied to planar circuits

Example Determine Io current in the circuit of Fig. 10.7 using mesh analysis.

Page 2: 10.3 Mesh Analysis

Fundamentals of EE II

EE1302 Dr. Naser Al-Falahy

University of Anbar College of Engineering Dept. of Electrical Engineering

83

Practice Problem Find Io in Fig. 10.8 using mesh analysis.

Page 3: 10.3 Mesh Analysis

Fundamentals of EE II

EE1302 Dr. Naser Al-Falahy

University of Anbar College of Engineering Dept. of Electrical Engineering

84

Example Solve for Vo in the circuit of Fig. 10.9 using mesh analysis.

Page 4: 10.3 Mesh Analysis

Fundamentals of EE II

EE1302 Dr. Naser Al-Falahy

University of Anbar College of Engineering Dept. of Electrical Engineering

85

Page 5: 10.3 Mesh Analysis

Fundamentals of EE II

EE1302 Dr. Naser Al-Falahy

University of Anbar College of Engineering Dept. of Electrical Engineering

86

Practice Problem Calculate Io current in the circuit of Fig. 10.11.

Page 6: 10.3 Mesh Analysis

Fundamentals of EE II

EE1302 Dr. Naser Al-Falahy

University of Anbar College of Engineering Dept. of Electrical Engineering

87