-
© 2010 Autodesk
Autodesk Moldflow 2012
Installation Licensing and Troubleshooting for
LINUX
-
© 2010 Autodesk
Content
Installation
Text based installation script
Troubleshoot
Installation and licensing issues
Useful commands
Linux
Autodesk Moldflow
* All pictures done on a Suse System
-
© 2010 Autodesk
INSTALLATION
-
© 2010 Autodesk
Attention
Read the installation guide before beginning the
installation
process
Small changes to previous installation!
-
© 2010 Autodesk
Installation
No license server on Linux, only license client
No need for serial number or product key :
AMI advanced is installed
When installing, enter license server name using ip address
or
with full hostname including domain
-
© 2010 Autodesk
Installation
File
DVD
Media
-
© 2010 Autodesk
Installation
susie:/opt # cd Autodesk/moldflow/install
susie:/opt/Autodesk/moldflow/install # tar xvof amilx26ol.tar
setup.exe setup.inf
setup.exe
setup.inf
susie:/opt/Autodesk/moldflow/install # ./setup.exe
------------------------------------------------------------------
Autodesk Setup Procedure - Version 5.0
------------------------------------------------------------------
Autodesk Setup Installation Menu
-----------------------------------
Autodesk Moldflow Insight - Release 2012
1. SELECT ALL PRODUCTS
NOT SELECTED 2. Autodesk Moldflow Insight
3. SHOW PRODUCT DESCRIPTIONS
4. INSTALL SELECTED PRODUCTS
0. EXIT MENU
Enter selection or list (0 - 4) [4] : 2
Example: file Create directory and copy tar file to this
location
Extract 2 files
-
© 2010 Autodesk
Installation Example: file Autodesk Setup Installation Menu
-----------------------------------
Autodesk Moldflow Insight - Release 2012
1. SELECT ALL PRODUCTS
SELECTED 2. Autodesk Moldflow Insight
3. SHOW PRODUCT DESCRIPTIONS
4. INSTALL SELECTED PRODUCTS
0. EXIT MENU
Enter selection or list (0 - 4) [4] : 4
Are you installing directly from a CD-ROM? (y/n): n
Please enter the tar file name :
/opt/Autodesk/moldflow/install/amilx26ol.tar
This command will use the tar file
-
© 2010 Autodesk
Loading product files from file:
Progress: [##################################################]
100%...
Extracting 167139 Kb from product files (261342700 Kb free):
Progress: [##################################################]
100%...
Installing Release 2012:
Progress: [##################################################]
100%...
Autodesk Client Machine setup:
This performs the tasks remaining to allow users to run the
software
'Autodesk Moldflow Insight Release 2012' on host 'susie'
Do you wish to proceed with the Autodesk Client Machine setup?
(y/n) [yes]:
Checking for required operating system components...
All operating system component checks OK
System tests completed OK.
Installation Example: file
Need to change to YES manually.
Client setup needs to be done!
-
© 2010 Autodesk
Adding /opt/Autodesk/moldflow/ami2012
to list of installed Moldflow Software... Done.
Creating ADLM client shared library symbolic links.
Creating ADLM PIT installation shared library symbolic
links.
Creating ADLM utilites shared library symbolic links.
Installing ADLM client adlmapps4-4.0.35-0.x86_64.rpm.
Installed ADLM client adlmapps4-4.0.35-0.x86_64.rpm.
Installing ADLM PIT tables.
There is no ADSKFLEX License Server set.
Do you wish to set a ADSKFLEX License Server now (y/n)
[yes]:
Enter the hostname of the ADSKFLEX License Server :
cgn6pmhsj
The ADSKFLEX License Server will be set to "cgn6pmhsj".
Is this correct, if not it will be left unchanged (y/n)
[yes]:
Setting ADSKFLEX License Server ... Done.
Autodesk Moldflow Insight 2012 Job Manager Settings
The Job Manager will write temporary files to /tmp
/tmp has 261008280 Kb free
Use this location for temporary files? (y/n) [no]: y
Installing Autodesk Moldflow Insight 2012 Job Manager daemon
Starting Autodesk Moldflow Insight 2012 Job Manager
/usr/bin/nohup: redirecting stderr to stdout
Autodesk Moldflow Insight 2012 Job Manager Installed
Autodesk Client Machine setup is complete.
Installation Example: file
This will setup the license server and
create the entry into the licpath.lic file.
This will setup the tmp location.
-
© 2010 Autodesk
You must now modify each Autodesk user's .cshrc or .profile
files.
(See section: Setting up a Users Environment in the Installation
Guide)
Users can then run Autodesk software on host 'susie'.
NOTE: C shell users must add:
"source /opt/Autodesk/moldflow/ami2012/data/MFENV.csh"
to their $HOME/.cshrc file in order to run the software
NOTE: Korn shell users must add:
". /opt/Autodesk/moldflow/ami2012/data/MFENV.sh"
to their $HOME/.profile file in order to run the software
Autodesk Moldflow Insight Release 2012 installation
completed.
Cleaning up files:
Progress: [##################################################]
100%...
Done.
susie:/opt/Autodesk/moldflow/install #
Installation Example: file
Which shell is in use?
add
User home
MFENV contains all environment variables
.profile
-
© 2010 Autodesk
Installation MFENV
MFENV contains all environment variables
For: Korn shell For: C shell
-
© 2010 Autodesk
TROUBLESHOOT
-
© 2010 Autodesk
Installation
Supported system
Troubleshoot
red hat EL 5.4:
not supported; will not work.
Analysis may start but will then fail
openSuSE 11.1:
not supported; will normally work
-
© 2010 Autodesk
Installation
Check installed Releases
Troubleshoot
-
© 2010 Autodesk
License
For license issues use the checklist
Troubleshoot
-
© 2010 Autodesk
License Troubleshoot
Error message ?
Describe: How is the analysis started via job manager from a PC
or on linux direct via command line and runstudy?
-
© 2010 Autodesk
License Troubleshoot
PC Is the license working on Client PC?
-
© 2010 Autodesk
License Troubleshoot
On Linux Do ALL file exist under /opt/Autodesk/Adlm
Available?
Client installation
*[2011 was [/var/adm/moldflow]
-
© 2010 Autodesk
License Troubleshoot
Ports Open: 2080, 27000 and 20323; if firewall exist
-
© 2010 Autodesk
License Troubleshoot
On PC License Server Check if the linux machine ask for a
license:
-
© 2010 Autodesk
License Troubleshoot
On linux /var/adm/moldflow/ check MFAA2012.log file
o.k.
-
© 2010 Autodesk
License Troubleshoot example
Error message
Log in Synergy on PC
** WARNING 99997 ** Required license for fiber is not available,
or all licenses
are currently in use.
Continuing analysis without feature. ** ERROR 99998 ** Required
license for AMI_BASIC is not available, or all licenses are
currently in use or the product you have installed is not
licensed to
run this feature.
Error message
MFAA2012.log
30282 2011/06/16 14:47:45 Reason=Fatal error
30282 2011/06/16 14:47:45 ComputerName=linuxhostname
30282 2011/06/16 14:47:45 OS=2.6.27.7-9-default
30282 2011/06/16 14:47:45
File=AdlmIntLicenseMgr.cpp,Line=309
30282 2011/06/16 14:47:45 AdlmIntError=34 [The locale supplied
is invalid, using the system locale]
30282 2011/06/16 14:47:45 Reason=Fatal error
30282 2011/06/16 14:47:45 ComputerName=linuxhostname
30282 2011/06/16 14:47:45 OS=2.6.27.7-9-default
30282 2011/06/16 14:47:45
File=AdlmIntLicenseMgr.cpp,Line=1718
30282 2011/06/16 14:47:45 AdlmIntError=30 [Error loading the
resource table]
Problem Unsupported language setting example LANG=C
Solved by changing the lang
variable in job manager
perhosts file
LANG=de_DE.UTF-8
export LANG
-
© 2010 Autodesk
License Troubleshoot
Licpath.lic Check the file licpath.lic
Check if the linux can ping the linuxhostname
What is the content of $ BASEDIR/licpath.lic as only this file
is relevant for resolving the license
server host name (and communication port).
Note if a different communication port is used: (not 27000, e.g.
using redundant servers through
port 27005) the first line of this file should be edited and the
communication port appended as the
4th word (after 000000000000)
-
© 2010 Autodesk
License Troubleshoot
If available Check content of adskflex.opt (on license
server)
-
© 2010 Autodesk
License Troubleshoot Create a log: ami2012jm_perhost_vars.ksh in
/var/adm/moldflow
add into the file which is marked in green
FLEXLM_DIAGNOSTICS=3
export FLEXLM_DIAGNOSTICS
Job manager to stop and restart
Then start the calculation from the PC via the Job Manager
on the Linux and I then check the screen output.
It should look like this one:
(C)2009 2010 2011
Portions of this software are covered by U.S. Patent Numbers
5,287,408 and
6,096,088.
Flow Analysis
Version: ami2012-barium_main (Build 11117-001)
64-bit build
Analysis commenced at Thu Jun 16 11:57:30 2011
Analysis running on host: susie
Operating System: Linux 2.6.32.12-0.7-default
Processor type: Quad-Core AMD Opteron(tm) Processor 2354 2200
MHz 1700 MHz
1100 MHz
Number of Processors: 4
Total Physical Memory: 16014 MBytes
Analysis has detected a mesh change since initial mesh
generation ... recalculating mesh match and thickness
information
Processing Dual Domain mesh...
Computing match using the maximal-sphere algorithm
... finished processing Dual Domain mesh
No mesh for the cores was found.
Core shift analysis switched OFF
FLEXnet Licensing checkout error: No such feature exists.
Feature: 85825MFIB_2012_0F
License path: /opt/Autodesk/moldflow/ami2012/licpath.lic:
FLEXnet Licensing error:-5,412
For further information, refer to the FLEXnet Licensing
documentation,
available at "www.flexerasoftware.com".
license file(s): /opt/Autodesk/moldflow/ami2012/licpath.lic
FLEXnet Licensing checkout error: No such feature exists.
Feature: 85824MFIP_2012_0F
License path: /opt/Autodesk/moldflow/ami2012/licpath.lic:
FLEXnet Licensing error:-5,412
For further information, refer to the FLEXnet Licensing
documentation,
available at "www.flexerasoftware.com".
license file(s): /opt/Autodesk/moldflow/ami2012/licpath.lic
Checkout succeeded: 85823MFIA_2012_0F/143B 57AA A940 50E0
License file: /opt/Autodesk/moldflow/ami2012/licpath.lic
License Server: @mucczx111g7
http://www.flexerasoftware.com/http://www.flexerasoftware.com/
-
© 2010 Autodesk
License Troubleshoot
protocol Check which once is used IPV 4 and or IPV6. If IPV 6
only that is not supported (/sbin/ifconfig )
-
© 2010 Autodesk
COMMANDS
-
© 2010 Autodesk
Linux Useful commands
“ps –e pipe grep jm” ps –e | grep jm
ps - report process status
ps -e select all processes
Is the Jobmanager running?
-
© 2010 Autodesk
Linux Useful commands
env
env –e | grep LANG
Capital letters
-
© 2010 Autodesk
Linux Useful commands
su
su - username
Pure su command: change to root (THE ADMINISTRATOR
on Linux/Unix systems)
-
© 2010 Autodesk
Linux Useful commands
ls
ls – la
-
© 2010 Autodesk
Linux Useful commands
ls – la
chmod
chown
chgrp
Change rights
Change owner
Change group
rights owner group
Example change rights to all
-
© 2010 Autodesk
Linux Useful commands
mount mount - mount a file system
All files accessible in a Unix system are arranged in one big
tree,
the file hierarchy, rooted at /. These files can be spread out
over
several devices. The mount command serves to attach the file
system found on some device to the big file tree. The
standard
form of the mount command, is
mount -t type device dir
-
© 2010 Autodesk
Linux Useful commands
cd ..
cd /opt/Autodesk
Use “/” at the beginning
-
© 2010 Autodesk
Linux Special Autodesk Moldflow commands
runstudy studyname.sdy
start
end
-
© 2010 Autodesk
Linux Special Autodesk Moldflow commands
./ami2012jmrc Starts and stops the Moldflow Job Manager
-
© 2010 Autodesk
