Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
(Alideck - Planter) - (Assembly Drawing)
B x 12 - Length 500mm C x 10 - Length 960mm D x 4 - Length 500mm
F x 4 - Length 300mm G x 12 - Length 500mm
I x 10 - Length 960mm J x 20 K x 16 L x 112
M x 112 N x 40
E x 4 - Length 960mm
O x 112
A x 2 - Length 1000mm
H x 2 - Length 1000mm
Drawn
(Alideck - Planter) - (Assembly Drawing)
+/- 1mm
Issuer (Tol) Rev
Product:
ShyamDate
30-03-20
V1
Scale
Page1 of 12
Page SizeA3 (L)
Drawing Title:
DNS
Finish
This drawing and the product it displays is the sole property of The Milwood Group any reproduction of this drawing or product without the written permission of The Milwood Group is prohibited.
3rd Angle Projection
From
PPC
MIL
Junior Balcony Flat Board
If In any doubt about details on this drawing call
us on 01622 235 672
Notes.Contractor to be responsible for checking this scheme against architects drawings/site requirements and toadvise Alideck immediately of any discrepancies. Orders placed against Alideck drawing reference assume approval of this scheme. Any materials required over and above the quantities given, will be charged accordingly.
Delivery and Storage.When delivered check that all boards and joists are present. Check whether the boards or joists have suffered any visible damage in transit Damaged panels must be noted on the delivery document and replaced if necessary. The boards and joists are delivered on a pallet (protected) and should also be stored this way on site. Do not store boards or joists standing upright.
Sequence000001
Customer Sign Off.
Sign ________________________________________________
Date________________________________________________
Record Of Revision Changes.Creation of drawing (V1)1.
Delivery Address
Colour; Textured Silver Grey/ Textured Sand
620
1000
500
Top Side With Seating Area
600
20
(Alideck - Planter) - (Assembly Drawing)
Drawn
(Alideck - Planter) - (Assembly Drawing)
+/- 1mm
Issuer (Tol) Rev
Product:
ShyamDate
30-03-20
V1
Scale
Page2 of 12
Page SizeA3 (L)
Drawing Title:
DNS
Finish
This drawing and the product it displays is the sole property of The Milwood Group any reproduction of this drawing or product without the written permission of The Milwood Group is prohibited.
3rd Angle Projection
From
PPC
MIL
Junior Balcony Flat Board
If In any doubt about details on this drawing call
us on 01622 235 672
Notes.Contractor to be responsible for checking this scheme against architects drawings/site requirements and toadvise Alideck immediately of any discrepancies. Orders placed against Alideck drawing reference assume approval of this scheme. Any materials required over and above the quantities given, will be charged accordingly.
Delivery and Storage.When delivered check that all boards and joists are present. Check whether the boards or joists have suffered any visible damage in transit Damaged panels must be noted on the delivery document and replaced if necessary. The boards and joists are delivered on a pallet (protected) and should also be stored this way on site. Do not store boards or joists standing upright.
Sequence000001
Customer Sign Off.
Sign ________________________________________________
Date________________________________________________
Record Of Revision Changes.Creation of drawing (V1)1.
Colour; Textured Silver Grey/ Textured Sand
Delivery Address:
E
F
KL
M
K
(Alideck - Planter) - (Assembly Drawing)
Assembly of base frame using low joists and angle brackets
Drawn
(Alideck - Planter) - (Assembly Drawing)
+/- 1mm
Issuer (Tol) Rev
Product:
ShyamDate
30-03-20
V1
Scale
Page3 of 12
Page SizeA3 (L)
Drawing Title:
DNS
Finish
This drawing and the product it displays is the sole property of The Milwood Group any reproduction of this drawing or product without the written permission of The Milwood Group is prohibited.
3rd Angle Projection
From
PPC
MIL
Junior Balcony Flat Board
If In any doubt about details on this drawing call
us on 01622 235 672
Notes.Contractor to be responsible for checking this scheme against architects drawings/site requirements and toadvise Alideck immediately of any discrepancies. Orders placed against Alideck drawing reference assume approval of this scheme. Any materials required over and above the quantities given, will be charged accordingly.
Delivery and Storage.When delivered check that all boards and joists are present. Check whether the boards or joists have suffered any visible damage in transit Damaged panels must be noted on the delivery document and replaced if necessary. The boards and joists are delivered on a pallet (protected) and should also be stored this way on site. Do not store boards or joists standing upright.
Sequence000001
Customer Sign Off.
Sign ________________________________________________
Date________________________________________________
Record Of Revision Changes.Creation of drawing (V1)1.
Colour; Textured Silver Grey/ Textured Sand
Delivery Address:
D
(Alideck - Planter) - (Assembly Drawing)
Assembly of vertical joists with the base frame using angle brackets
Drawn
(Alideck - Planter) - (Assembly Drawing)
+/- 1mm
Issuer (Tol) Rev
Product:
ShyamDate
30-03-20
V1
Scale
Page4 of 12
Page SizeA3 (L)
Drawing Title:
DNS
Finish
This drawing and the product it displays is the sole property of The Milwood Group any reproduction of this drawing or product without the written permission of The Milwood Group is prohibited.
3rd Angle Projection
From
PPC
MIL
Junior Balcony Flat Board
If In any doubt about details on this drawing call
us on 01622 235 672
Notes.Contractor to be responsible for checking this scheme against architects drawings/site requirements and toadvise Alideck immediately of any discrepancies. Orders placed against Alideck drawing reference assume approval of this scheme. Any materials required over and above the quantities given, will be charged accordingly.
Delivery and Storage.When delivered check that all boards and joists are present. Check whether the boards or joists have suffered any visible damage in transit Damaged panels must be noted on the delivery document and replaced if necessary. The boards and joists are delivered on a pallet (protected) and should also be stored this way on site. Do not store boards or joists standing upright.
Sequence000001
Customer Sign Off.
Sign ________________________________________________
Date________________________________________________
Record Of Revision Changes.Creation of drawing (V1)1.
Colour; Textured Silver Grey/ Textured Sand
Delivery Address:
F
E
(Alideck - Planter) - (Assembly Drawing)
Assembly of top frame with base frame using angle brackets
Drawn
(Alideck - Planter) - (Assembly Drawing)
+/- 1mm
Issuer (Tol) Rev
Product:
ShyamDate
30-03-20
V1
Scale
Page5 of 12
Page SizeA3 (L)
Drawing Title:
DNS
Finish
This drawing and the product it displays is the sole property of The Milwood Group any reproduction of this drawing or product without the written permission of The Milwood Group is prohibited.
3rd Angle Projection
From
PPC
MIL
Junior Balcony Flat Board
If In any doubt about details on this drawing call
us on 01622 235 672
Notes.Contractor to be responsible for checking this scheme against architects drawings/site requirements and toadvise Alideck immediately of any discrepancies. Orders placed against Alideck drawing reference assume approval of this scheme. Any materials required over and above the quantities given, will be charged accordingly.
Delivery and Storage.When delivered check that all boards and joists are present. Check whether the boards or joists have suffered any visible damage in transit Damaged panels must be noted on the delivery document and replaced if necessary. The boards and joists are delivered on a pallet (protected) and should also be stored this way on site. Do not store boards or joists standing upright.
Sequence000001
Customer Sign Off.
Sign ________________________________________________
Date________________________________________________
Record Of Revision Changes.Creation of drawing (V1)1.
Colour; Textured Silver Grey/ Textured Sand
Delivery Address:
C
C
(Alideck - Planter) - (Assembly Drawing)
Assembly of side boards with frame using M8 bolts
Drawn
(Alideck - Planter) - (Assembly Drawing)
+/- 1mm
Issuer (Tol) Rev
Product:
ShyamDate
30-03-20
V1
Scale
Page6 of 12
Page SizeA3 (L)
Drawing Title:
DNS
Finish
This drawing and the product it displays is the sole property of The Milwood Group any reproduction of this drawing or product without the written permission of The Milwood Group is prohibited.
3rd Angle Projection
From
PPC
MIL
Junior Balcony Flat Board
If In any doubt about details on this drawing call
us on 01622 235 672
Notes.Contractor to be responsible for checking this scheme against architects drawings/site requirements and toadvise Alideck immediately of any discrepancies. Orders placed against Alideck drawing reference assume approval of this scheme. Any materials required over and above the quantities given, will be charged accordingly.
Delivery and Storage.When delivered check that all boards and joists are present. Check whether the boards or joists have suffered any visible damage in transit Damaged panels must be noted on the delivery document and replaced if necessary. The boards and joists are delivered on a pallet (protected) and should also be stored this way on site. Do not store boards or joists standing upright.
Sequence000001
Customer Sign Off.
Sign ________________________________________________
Date________________________________________________
Record Of Revision Changes.Creation of drawing (V1)1.
Colour; Textured Silver Grey/ Textured Sand
Delivery Address:
B
B
(Alideck - Planter) - (Assembly Drawing)
Assembly of another side boards with frame using M8 bolts
Drawn
(Alideck - Planter) - (Assembly Drawing)
+/- 1mm
Issuer (Tol) Rev
Product:
ShyamDate
30-03-20
V1
Scale
Page7 of 12
Page SizeA3 (L)
Drawing Title:
DNS
Finish
This drawing and the product it displays is the sole property of The Milwood Group any reproduction of this drawing or product without the written permission of The Milwood Group is prohibited.
3rd Angle Projection
From
PPC
MIL
Junior Balcony Flat Board
If In any doubt about details on this drawing call
us on 01622 235 672
Notes.Contractor to be responsible for checking this scheme against architects drawings/site requirements and toadvise Alideck immediately of any discrepancies. Orders placed against Alideck drawing reference assume approval of this scheme. Any materials required over and above the quantities given, will be charged accordingly.
Delivery and Storage.When delivered check that all boards and joists are present. Check whether the boards or joists have suffered any visible damage in transit Damaged panels must be noted on the delivery document and replaced if necessary. The boards and joists are delivered on a pallet (protected) and should also be stored this way on site. Do not store boards or joists standing upright.
Sequence000001
Customer Sign Off.
Sign ________________________________________________
Date________________________________________________
Record Of Revision Changes.Creation of drawing (V1)1.
Colour; Textured Silver Grey/ Textured Sand
Delivery Address:
A
B
(Alideck - Planter) - (Assembly Drawing)
Assembly of top boards with frame using M8 bolts
Drawn
(Alideck - Planter) - (Assembly Drawing)
+/- 1mm
Issuer (Tol) Rev
Product:
ShyamDate
30-03-20
V1
Scale
Page8 of 12
Page SizeA3 (L)
Drawing Title:
DNS
Finish
This drawing and the product it displays is the sole property of The Milwood Group any reproduction of this drawing or product without the written permission of The Milwood Group is prohibited.
3rd Angle Projection
From
PPC
MIL
Junior Balcony Flat Board
If In any doubt about details on this drawing call
us on 01622 235 672
Notes.Contractor to be responsible for checking this scheme against architects drawings/site requirements and toadvise Alideck immediately of any discrepancies. Orders placed against Alideck drawing reference assume approval of this scheme. Any materials required over and above the quantities given, will be charged accordingly.
Delivery and Storage.When delivered check that all boards and joists are present. Check whether the boards or joists have suffered any visible damage in transit Damaged panels must be noted on the delivery document and replaced if necessary. The boards and joists are delivered on a pallet (protected) and should also be stored this way on site. Do not store boards or joists standing upright.
Sequence000001
Customer Sign Off.
Sign ________________________________________________
Date________________________________________________
Record Of Revision Changes.Creation of drawing (V1)1.
Colour; Textured Silver Grey/ Textured Sand
Delivery Address:
JN
(Alideck - Planter) - (Assembly Drawing)
Assembly of end plates with boards using 4mm no. 8 stainless steel screw
Drawn
(Alideck - Planter) - (Assembly Drawing)
+/- 1mm
Issuer (Tol) Rev
Product:
ShyamDate
30-03-20
V1
Scale
Page9 of 12
Page SizeA3 (L)
Drawing Title:
DNS
Finish
This drawing and the product it displays is the sole property of The Milwood Group any reproduction of this drawing or product without the written permission of The Milwood Group is prohibited.
3rd Angle Projection
From
PPC
MIL
Junior Balcony Flat Board
If In any doubt about details on this drawing call
us on 01622 235 672
Notes.Contractor to be responsible for checking this scheme against architects drawings/site requirements and toadvise Alideck immediately of any discrepancies. Orders placed against Alideck drawing reference assume approval of this scheme. Any materials required over and above the quantities given, will be charged accordingly.
Delivery and Storage.When delivered check that all boards and joists are present. Check whether the boards or joists have suffered any visible damage in transit Damaged panels must be noted on the delivery document and replaced if necessary. The boards and joists are delivered on a pallet (protected) and should also be stored this way on site. Do not store boards or joists standing upright.
Sequence000001
Customer Sign Off.
Sign ________________________________________________
Date________________________________________________
Record Of Revision Changes.Creation of drawing (V1)1.
Colour; Textured Silver Grey/ Textured Sand
Delivery Address:
G
I
G
I
HG
(Alideck - Planter) - (Assembly Drawing)
Assembly of board clips with boards
Drawn
(Alideck - Planter) - (Assembly Drawing)
+/- 1mm
Issuer (Tol) Rev
Product:
ShyamDate
30-03-20
V1
Scale
Page10 of 12
Page SizeA3 (L)
Drawing Title:
DNS
Finish
This drawing and the product it displays is the sole property of The Milwood Group any reproduction of this drawing or product without the written permission of The Milwood Group is prohibited.
3rd Angle Projection
From
PPC
MIL
Junior Balcony Flat Board
If In any doubt about details on this drawing call
us on 01622 235 672
Notes.Contractor to be responsible for checking this scheme against architects drawings/site requirements and toadvise Alideck immediately of any discrepancies. Orders placed against Alideck drawing reference assume approval of this scheme. Any materials required over and above the quantities given, will be charged accordingly.
Delivery and Storage.When delivered check that all boards and joists are present. Check whether the boards or joists have suffered any visible damage in transit Damaged panels must be noted on the delivery document and replaced if necessary. The boards and joists are delivered on a pallet (protected) and should also be stored this way on site. Do not store boards or joists standing upright.
Sequence000001
Customer Sign Off.
Sign ________________________________________________
Date________________________________________________
Record Of Revision Changes.Creation of drawing (V1)1.
Colour; Textured Silver Grey/ Textured Sand
Delivery Address:
I
Planter to be lined with membrane before soil or other natural materials are added. (Membrane by other)
DETAIL I
(Alideck - Planter) - (Assembly Drawing)
Drawn
(Alideck - Planter) - (Assembly Drawing)
+/- 1mm
Issuer (Tol) Rev
Product:
ShyamDate
30-03-20
V1
Scale
Page11 of 12
Page SizeA3 (L)
Drawing Title:
DNS
Finish
This drawing and the product it displays is the sole property of The Milwood Group any reproduction of this drawing or product without the written permission of The Milwood Group is prohibited.
3rd Angle Projection
From
PPC
MIL
Junior Balcony Flat Board
If In any doubt about details on this drawing call
us on 01622 235 672
Notes.Contractor to be responsible for checking this scheme against architects drawings/site requirements and toadvise Alideck immediately of any discrepancies. Orders placed against Alideck drawing reference assume approval of this scheme. Any materials required over and above the quantities given, will be charged accordingly.
Delivery and Storage.When delivered check that all boards and joists are present. Check whether the boards or joists have suffered any visible damage in transit Damaged panels must be noted on the delivery document and replaced if necessary. The boards and joists are delivered on a pallet (protected) and should also be stored this way on site. Do not store boards or joists standing upright.
Sequence000001
Customer Sign Off.
Sign ________________________________________________
Date________________________________________________
Record Of Revision Changes.Creation of drawing (V1)1.
Colour; Textured Silver Grey/ Textured Sand
Delivery Address:
Low Joist
(Alideck - Planter) - (Assembly Drawing)
Board Type Amounts / Cutting List Amounts / Cutting ListClip Type
Amounts / Cutting ListJoist Type Pedistal Type Amounts
Amounts Gutter Channel Type
Extras Amounts
Junior Balcony FlatBoard Trim
Can Of Paint (With Brush)
Aerosole Paint
Fixings 112 x Of - M8 x 30mm Bolts (Zinc)
1 x Textured Silver Grey/ Textured Sand
112 x Of - M8 Washers (Zinc)
1 x Textured Silver Grey/ Textured Sand
12 x at 500mm
10 x at 960mm
2 x at 1000mm
12 x at 500mm
10 x at 960mm
2 x at 1000mm
4 x at 500mm
4 x at 300mm
4 x at 960mm
Board End Plates (SNR / JNR) 20 x Of - JNR / SNR End Plates
Junior Balcony Flat Board (20mm)
N.A N.A
N.AN.A
Angle Brackets 16x Of - Brackets
40 x Of - 4mm No 8 Stainless Steel Screw
112 x Of - M8 Dome Head Nut (Zinc)
Drawn
(Alideck - Planter) - (Assembly Drawing)
+/- 1mm
Issuer (Tol) Rev
Product:
ShyamDate
30-03-20
V1
Scale
Page12 of 12
Page SizeA3 (L)
Drawing Title:
DNS
Finish
This drawing and the product it displays is the sole property of The Milwood Group any reproduction of this drawing or product without the written permission of The Milwood Group is prohibited.
3rd Angle Projection
From
PPC
MIL
Junior Balcony Flat Board
If In any doubt about details on this drawing call
us on 01622 235 672
Notes.Contractor to be responsible for checking this scheme against architects drawings/site requirements and toadvise Alideck immediately of any discrepancies. Orders placed against Alideck drawing reference assume approval of this scheme. Any materials required over and above the quantities given, will be charged accordingly.
Delivery and Storage.When delivered check that all boards and joists are present. Check whether the boards or joists have suffered any visible damage in transit Damaged panels must be noted on the delivery document and replaced if necessary. The boards and joists are delivered on a pallet (protected) and should also be stored this way on site. Do not store boards or joists standing upright.
Sequence000001
Customer Sign Off.
Sign ________________________________________________
Date________________________________________________
Record Of Revision Changes.Creation of drawing (V1)1.
Delivery Address
Colour; Textured Silver Grey/ Textured Sand