Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
On a global average, designers spend around 30% of their time in doing rework on product designs. Majority of the causes for this rework fall under the category of DFX (Design for X), which includes issues such as manufacturability, assembly, quality, serviceability, environment and so on. Typically, organizations carry out manual design reviews which are time consuming and error prone. Also, if the defect gets detected at later stage in the product development, the cost, time and e�ort required to correct it multiplies exponentially. Organizations look for ways and means to address these issues as early in the product development cycle as possible.
08/2
013
© G
eom
etric
Ltd
.
Geometric DFX addresses this need Geometric DFX is an automated design validation solution to address DFX challenges early
during the design phase. Geometric DFX is a standalone application to validate 3D CAD
parts and assemblies for various DFX issues. It supports �le formats from widely used CAD
platforms such as CATIA, NX, Creo Parametric, Inventor, SolidWorks, SolidEdge, modeling
kernels such as ACIS and Parasolid as well as neutral formats like STEP and IGES.
Powerful yet simpleGeometric DFX has a simple user interface which allows the user to run DFX checks and
generate reports in a few clicks. The ‘Out of the Box’ (OOTB) version comes prepackaged
with 100+ design rules based on global best practices which cover various downstream
issues related to DFX. The OOTB solution can be customized to add new rules meeting
organizational needs and can be deployed at an enterprise level.
Bene�ts• Reduce rework – Improve
productivity
• Shorten product development time
• Improve product design and quality
• Reduce scrap and wastage
• Capture expert knowledge and
learnings
System requirements• Microsoft® Windows® XP
Professional, Windows® Vista,
Windows 7 - 32 and 64 bit
• 1 GB of RAM with 500 MB or
more of free temp space
About GeometricGeometric is a specialist in the domain of engineering solutions, services and technologies. Its
Geometry Technology Solutions (GTS) business unit develops cutting-edge point productivity
solutions that enhance design and improve manufacturing operations. The end-user products from
Geometric include CAMWorks®, eDrawings® Publisher, DFMPro, GeomCaliper®, 3DPaintBrush™,
CAMWorksXpress® and Glovius®. The key technologies from Geometric are NestLib®, Feature
Recognition (FR), GeomDiff and 3DSearchIT®. Geometric licenses these technologies to OEM
partners and also designs and implements customized process solutions using these technologies
for industrial customers.
For further details about Geometric’s GTS business unit, please visit
www.geometricglobal.com/products or call +1.480.367.0132
The copyright/ trademarks of all products referenced herein are held by their respective companies.
Contact usAmerica +1.480.367.0132Europe +49.711.49.039.730 Asia-Paci�c +91.22.6705.6880