Upload
edwin-bautista
View
222
Download
0
Embed Size (px)
Citation preview
7/27/2019 Enyecontrols TKG CO
http://slidepdf.com/reader/full/enyecontrols-tkg-co 1/3
TKG-CO
Carbon Monoxide Detector/Controller
Features
Design for real-time detection air carbon monoxide.
High accuracy humidity and temperature detection optional
LCD display carbon monoxide and optional temperature& RH measurement.
Smart buttons for easy operation
Excellent electrochemical CO sensor with more than 5 years lift time
Replaceable CO sensorProvide 1X analog linear output (0-1 0VDCl4-20mA selectable)
for the measurement
Providing up to two dry contact outputs with presetting the setpoint
Modbus RS485 communication interface optional
Provide two easy methods for calibration and setup alarm points by end users:
infrared remote controller or a software via RS485
24VACNDC power supply
CE-Approval
Typical Applications
+ In office and residence areas to detect CO level
+ In undergroung parking lots and garages
+ In BAS to detect the CO and the data transmittance
+ For greenhouse and plant bin
+ For ventilation control system
Specifications
Gas Sensor
Sensor lifetime
Warm up time
Response Time
Signal Update
CO Measuring Range
Accuracy
Stability
Electrochemical carbon monoxide sensor
Normally more than 3 years, replaceable
1hour (first time)
Within 60 seconds
I s
0-500ppm(default)/O-100ppm10-1000ppm selectable
< Ippm+5%reading
f % (over 900 days)
7/27/2019 Enyecontrols TKG CO
http://slidepdf.com/reader/full/enyecontrols-tkg-co 2/3
Outputs
Relative Humidity
Capacitive humidity sensor
0 -100%RH
k4.O%RH (25"C, 15%-85%RH)
O.I%RHkl%R H per year
Temperature& Humidity Sensor (optional)
Sensing element:
Measuring range
Accuracy
Display resolutionStability
Electrical and General Items
Temperature
Band-gap-senor
-20°C-60°C
k0.5"C (20-40°C)
0.1 CkO.l "C per year
LCD Display (optional)
Analog Output
Analog Output Resolution
Relay dry contact Output
Modbus Interface
Display CO measurement
or CO+ temperature& humidity measurements
1x0-IOVDC or 4-20mA linear output
16Bit
Up to two dry-contact outputs
Max, switching current 3A (230VACl30VDC), resistance Load
Modbus RS-485 with 19200bps(default),other rates selectable
in the order. 15KV antistatic protection
Demensions&Mounting
Power Supply
Power Consumption
Wiring Standard
Working Condition
Storage Conditions
Net Weight
Manufacturing Process
Housing and IP class
Compliance
probe Length
Probe Diameter
Installation Holes
24VACNDC
2.8W
Wire section area 4 .5mm2
-10°C-60mC(14-140°F);5-99%RH, non condensing
-10-60mC(14-140"F)l 5-99%RH, non condensing 22609
IS 0 9001 Certified
PCIABS fireproof plastic material, protection class: IP30
CE-EMC Approval
7/27/2019 Enyecontrols TKG CO
http://slidepdf.com/reader/full/enyecontrols-tkg-co 3/3
Wiring Diagram
Models Guide
TKG- CO- 1X Y Z C - R-TH
1 wall mounted with the external sensor in an adown probe
X: analog output
0: no analog output
1 1x0-1 OVDC linear output(default)
2: 1x4-20mA linear output (default)
3: 1x0-IOVDC output and can be switch to 4-20mA (just for only one analog output)
Y: relay dry contact output
0: no dry contact output
1 Ixdry contact output
2: 2xdry contact outputs
Z: Communication interface
0: no communication
1: Modbus RS485 interface
C: 24VDCNAC power supply
R: co range
005: 0-500ppm (default)
001 0-1 00ppm
010: 0-1 000ppm
-TH(option) temperature& RH detection and display
No -TH indicates without temperature & RH detection and display
-NL(option) No LCD display for the transmitter with the analog linear output or with the Modbus interface.
For example:TKG-CO-1101-001-TH indicates the CO detector with 1x0-IOVDC linear output and Modbus interface. CO
range:O-100ppm. It has temperature and humidity detection and display.