manual

Features

Name of Parts Attention

Maintenance

www.fisheye-jp.com

NEO Triple Filter System

Specifications

Mounting the filter blade

1

03-5988-0191 cs@fisheye-jp.com

Customer ServiceFisheye Co.,Ltd5-29-7 Minami Nagasaki Toshima-ku, Tokyo 171-0052 JAPAN

Thank you for purchasing the FIX NEO Triple Filter System. This product is a set of color temperature

conversion filters and red filter for exclusive use with FIX NEO DX Light.

- The color temperature conversion filter (5500K, 4000K) allows you to correct the color temperature of the light.- The red filter is effective in observation and photography of animals that are sensitive to light.- The Flip-type filter blade allow you to easily switch the filters underwater.

Push the sides of the filter axis holes to gain better access during installa-tion.

- After use, wash the product with fresh water, avoid direct sunlight, and dry it in a place with good ventilation.

- Never use neutral detergents or organic solvents such as alcohol, thinner or　benzene.

- Please store the product avoiding humidity and high temperature.

- Firmly insert the light head into the filter holder.- You can only use one filter at a time.- Flip a filter into place and push into the filter holder until the filter

is seated firmly.-To avoid dropping or losing the filter underwater, attach the

included strap.- Avoid impacts or heavy vibration of the filters so they don’t

become damaged.- For travel, removed each filter blade to avoid damage.- Do not leave the filter set in direct sunlight or enclosed hot areas

to avoid damage.

2 With the filer axis holes spread, insert one end of the filter axis and then the other side.*Ensure the filter blade is oriented correctly with the filter axis facing toward the holder opening.

3To disassemble, repeat the steps in reverse order.

Filter Holder

Color temperature conversion filter *5500K (Daylight:Dark color) *4000K (Warm:Light color)

Axis holeFilter blade

Filter axis

Strap hole

Red filter

*Mounting the filter blade in a state not to attach it to the light.

Material:Dimensions:

Weight:Includes:

Rubber, Acrylic resin, ABS resinMax.outside φ80 x D33mmFilter inside φ53x D25mm60gStrap for loss prevention

1

3

1

2

The backside

*A protective film for protection is put on the both sides of each filter. Please remove it off before using.