Upload
denwego
View
230
Download
0
Embed Size (px)
Citation preview
8/11/2019 Grass Valley Encore Control System
1/353
EncoreCONTROL SYSTEM
Configuration Manual
Software Version 1.7.4.1
071853103
OCTOBER 2009
8/11/2019 Grass Valley Encore Control System
2/353
Affiliate with the N.V. KEMA in The Netherlands
CERTIFICATECertificate Number: 510040.001The Quality System of:
Thomson Inc, and its wordwide Grass Valley division affiliates DBAGRASS VALLEY
Headquarters
400 Providence Mine RdNevada City, CA 95959United States
15655 SW Greystone Ct.Beaverton, OR 97006United States
10 Presidential WaySuite 300Woburn, MA 01801United States
Kapittelweg 104827 HG BredaThe Nederlands
7140 Baymeadows WaySte 101Jacksonville, FL 32256United States
2300 So. Decker Lake Blvd.Salt Lake City, UT 84119United States
Rue du Clos CourtelCS 3171935517 Cesson-Sevign CedexFrance
1 rue de lHautilZ.I. des Boutries BP 15078702 Conflans-SainteHonorine CedexFrance
Technopole Brest-IroiseSite de la Pointe du DiableCS 7380829238 Brest Cedex 3France
40 Rue de Bray2 Rue des Landelles35510 Cesson SevignFrance
Spinnereistrasse 5CH-5300 TurgiSwitzerland
Brunnenweg 9D-64331 WeiterstadtGermany
Carl-Benz-Strasse 6-867105 SchifferstadtGermany
Including its implementation, meets the requirements of the standard:
ISO 9001:2008Scope:The design, manufacture and support of video and audio hardware and software products and
related systems.
This Certificate is valid until: June 14, 2012This Certificate is valid as of: June 14, 2009Certified for the first time: June 14, 2000
H. Pierre Sall
PresidentKEMA-Registered Quality
The method of operation for quality certification is defined in the KEMA General TermsAnd Conditions For Quality And Environmental Management Systems Certifications.Integral publication of this certificate is allowed.
KEMA-Registered Quality, Inc.4377 County Line RoadChalfont, PA 18914Ph: (215)997-4519Fax: (215)997-3809CRT 001 073004
Accredited By:ANAB
8/11/2019 Grass Valley Encore Control System
3/353
EncoreCONTROL SYSTEM
Configuration Manual
Software Version 1.7.4.1
071853103
OCTOBER 2009
8/11/2019 Grass Valley Encore Control System
4/353
4 Encore Configuration Manual
Contacting Grass Valley
Copyright Grass Valley, Inc. All rights reserved.This product may be covered by one or more U.S. and foreign patents.
Grass Valley Web Site
The www.grassvalley.comweb site offers the following:
Online User Documentation Current versions of product catalogs, brochures,data sheets, ordering guides, planning guides, manuals, and release notesin .pdf format can be downloaded.
FAQ Database Solutions to problems and troubleshooting efforts can befound by searching our Frequently Asked Questions (FAQ) database.
Software Downloads Download software updates, drivers, and patches.
InternationalSupport Centers
France24 x 7
+800 8080 2020 or +33 1 48 25 20 20United States/Canada
24 x 7+1 800 547 8949 or +1 530 478 4148
Local SupportCenters
(availableduring normal
business hours)
AsiaHong Kong, Taiwan, Korea, Macau: +852 2531 3058Indian Subcontinent: +91 22 24933476Southeast Asia/Malaysia: +603 7805 3884Southeast Asia/Singapore: +65 6379 1313
China: +861 0660 159 450Japan: +81 3 5484 6868
Australia and New Zealand: +61 1300 721 495 Central/South America: +55 11 5509 3443
Middle East: +971 4 299 64 40Near East and Africa: +800 8080 2020 or +33 1 48 25 20 20
Europe
Belarus, Russia, Tadzikistan, Ukraine, Uzbekistan: +7 095 2580924 225Switzerland: +41 1 487 80 02S. Europe/Italy-Roma: +39 06 87 20 35 28-Milan: +39 02 48 41 46 58S. Europe/Spain: +34 91 512 03 50Benelux/Belgium: +32 (0) 2 334 90 30Benelux/Netherlands: +31 (0) 35 62 38 42 1N. Europe: +45 45 96 88 70Germany, Austria, Eastern Europe: +49 6150 104 444UK, Ireland, Israel: +44 118 923 0499
http://www.thomsongrassvalley.com/http://www.thomsongrassvalley.com/8/11/2019 Grass Valley Encore Control System
5/353
Encore Configuration Manual 5
Contents
Preface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13About This Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Documentation Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Additional Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Section 1 Encore System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Controlled Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Encore System Controller Frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Control Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Encore System Control Fundamentals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Distributed Control System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Encore Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Sharer Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Configuration PC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Sharer PC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Routing Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Matrix Crosspoints and Levels Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Sources and Destinations Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Multi-Level Switching Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
All Level Take. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Breakaway Take. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Tie-Line Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Section 2 Encore Fundamentals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
System Functional Layers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Client/Server Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26System Communications During Normal Operation . . . . . . . . . . . . . . . . . . . . . 27Distributed Configuration and Status Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Automatic Detection of Database Match . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Redundancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Database Backups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Encore Software Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Local Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Remote Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Control Panel Server Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Router Control Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Tie-Line Manager Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33System Manager Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
8/11/2019 Grass Valley Encore Control System
6/353
6 Encore Configuration Manual
Contents
Section 3 Encore OUI Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Common Display Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Encore Desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Icons and Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Message Window (with options) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Message Window (without options) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Selecting Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Basic Procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Logging onto the OUI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Loading an Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Loading a Local Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Loading a Remote Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Requesting an Application from Another User . . . . . . . . . . . . . . . . . . . . . . . . 44
Dropping an Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45OUI Station Status Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Ancillary Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Shortcut Key Editor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Logging off the OUI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Changing the Size of Your Encore OUI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Section 4 Initial Encore System Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PC Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Initial Setup Using Default Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
What The Encore Default Database Does . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Create Default Encore Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Default IP Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Network Cabling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Install Encore Software (including NetConfig) on PC . . . . . . . . . . . . . . . . . . . . 57
Verify System Components with NetConfig . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58About NetConfig. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Launch NetConfig. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Confirm Component Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Duplicate IP Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Specify System Controller Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64Slot 1 (Left) SCB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64Slot 2 (Right) SCB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Initialize the Encore System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Test Initial System Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Confirm Master/Mirror Sync Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Manual Initial System Setup (Without Default Database). . . . . . . . . . . . . . . . . . . 73
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Create Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Load Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73System Controller Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Initialize the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Logging On Using Special Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74Registering Your Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77Adding Engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79Adding Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82Adding Users. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
8/11/2019 Grass Valley Encore Control System
7/353
Encore Configuration Manual 7
Contents
Full System Configuration Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86Redundancy Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
SCB Reference Count Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87Redundancy Requirements and Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Multiple Area Encore Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89Network Communications Between Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Route Table (Multi-Area Systems Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91Hardware Installation for a New Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Use the OUI and System Manager to Add an Area:. . . . . . . . . . . . . . . . . . . . . 91Assigning a User to an Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92Assigning Engines and Applications to an Area. . . . . . . . . . . . . . . . . . . . . . . . 92Assigning Applications for New SCBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92Assigning an SCB to an Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93Assigning a Router Controller to an Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93Configuring Control Panels in Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Changing Area Assignments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Section 5 Router Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Encore Router Control Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95Router Configuration Background Information. . . . . . . . . . . . . . . . . . . . . . . . . . 96
Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96Levels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97Physical Matrix Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97Logical Matrix Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98Sources and Destinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Router Configuration Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99Network Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99Backup OMN Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Router Controller Main Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100System Configure Screen Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Creating a New Router Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106Level Screen Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Configuring a Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109Channels Screen Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Configuring a Communication Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113Physical Matrix Screen Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Crosspoint Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119Crosspoint Group Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
(Matrix) Controller Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120Configuring Concerto Slots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Segment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123Configuring a Physical Matrix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Logical Matrix Configuration Screen Description . . . . . . . . . . . . . . . . . . . . . . . . . 127Logical Matrix Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128Configuring a Logical Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Virtual Crosspoints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Source Configuration Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Configuring a Source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
8/11/2019 Grass Valley Encore Control System
8/353
8 Encore Configuration Manual
Contents
Destinations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136Destination Configuration Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136Configuring a Destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Rules Configuration Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140Router Controller Configuration Save and Load . . . . . . . . . . . . . . . . . . . . . . . . . 143
Saving Router Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Loading Router Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144Sample Router Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146Two Levels in One Blocked Crosspoint Group . . . . . . . . . . . . . . . . . . . . . . . 146Two Levels in Two Crosspoint Groups (Multi-Dropped) . . . . . . . . . . . . . . 147Two Levels in Two Crosspoint Groups (Separate I/O) . . . . . . . . . . . . . . . . 148Two Levels in One Interleaved Crosspoint Group . . . . . . . . . . . . . . . . . . . . 149Two Elements in One Blocked Crosspoint Group . . . . . . . . . . . . . . . . . . . . . 150Two Elements in Two Crosspoint Groups (Multi-Dropped) . . . . . . . . . . . . 151Two Elements in Two Crosspoint Groups (Separate I/O) . . . . . . . . . . . . . . 152RGB and Key as Two Levels in One Crosspoint Group . . . . . . . . . . . . . . . . 153RGB and Key as One Level in One Crosspoint Group . . . . . . . . . . . . . . . . . 154Four Elements in Two Crosspoint Group (Blocked) . . . . . . . . . . . . . . . . . . . 155Four Elements and Two Crosspoint Group (Interleaved) . . . . . . . . . . . . . . 157
Four Levels and Two Crosspoint Group (Blocked) . . . . . . . . . . . . . . . . . . . . 159Four Levels and Two Crosspoint Groups (Interleaved) . . . . . . . . . . . . . . . . 161RGB and Key as Two Levels and Two Crosspoint Groups . . . . . . . . . . . . . 163Multiple Levels and Shared Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165Multiple Matrix Controllers and Shared Elements . . . . . . . . . . . . . . . . . . . . 167
Configuration Export and Import . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168Exporting a Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168Importing a Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Route Screen Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171Making a Take. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172Router Status Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Names Screen Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174Changing a Name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
Naming Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175Seven or Eight Character Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175Spaces in Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176Upper Case Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176Panel and Template Names. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176RCL Client Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176Avoid Special Characters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Options Screen Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177Database Validation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Database Validity Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179Invalid Router Database Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179Invalid Router Database Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180No Matrix Indication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180No Matrix Status Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181Selecting No Matrix Status Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Output Monitoring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181To Configure and Use Destination Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Native Protocol Matrix Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188NP Matrix Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189Redundancy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
8/11/2019 Grass Valley Encore Control System
9/353
Encore Configuration Manual 9
Contents
Protect and Unprotect. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197Monitor Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Section 6 Control Panel Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
Control Panel Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199Control Panel Defaults (Factory and Facility) . . . . . . . . . . . . . . . . . . . . . . . . . . . 199Factory Default Templates and Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200RCL Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
Control Panel Server Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201Panel Server Configuration Screen Description . . . . . . . . . . . . . . . . . . . . . . . . . 201Panel Server Redundancy and IP Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
Reasons for Loss of Redundancy Sync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204Panel Server Configuration Save and Load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
Saving Panel Server Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205Loading Panel Server Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Filing Mode Indication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206No Router Indication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Quick Control Panel Server Salvo Startup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207Panel Server Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208Panel Configuration Screen Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Menu Bar Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209Hiding the Menu Bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Control Panel Screen Representation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209Panel Configuration Screen Example (Encore XY) . . . . . . . . . . . . . . . . . . . . . 210
Panel Button Function Assignments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213Panel Template Management Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214KeyPad Set Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
Keypad Set Conversion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217Configuration Attributes and Flags Window . . . . . . . . . . . . . . . . . . . . . . . . . . . 218Configuring Encore Control Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
Rapid Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227Destination Exclusion Set Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
Destination Exclusion Set Configuration Menu . . . . . . . . . . . . . . . . . . . . . . . 228Exclusion, Page, and Keypad Set Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . 229Salvo Button Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230Control Panel Self Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230Control Panel Grouping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
Panel Grouping Configuration Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231Panel Group Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232BPS + 48B Grouping Configuration Example . . . . . . . . . . . . . . . . . . . . . . . . . 232XY + 48B Grouping Configuration Example . . . . . . . . . . . . . . . . . . . . . . . . . . 23448B + 48B + 48B Panel Group Configuration Example . . . . . . . . . . . . . . . . . 235
Control Panels and Areas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
Configuring Control Panels to Access All Areas . . . . . . . . . . . . . . . . . . . . . . 236Configuring Control Panels for Specific Area(s). . . . . . . . . . . . . . . . . . . . . . . 237
Joystick Override Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239Available Panel Configuration Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
Encore Model Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240BPS (Button Per Source) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240PMB (Paging MultiBus) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241XY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24148B (48 Button) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
8/11/2019 Grass Valley Encore Control System
10/353
10 Encore Configuration Manual
Contents
UCP (Encore Universal Control). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242CLNT (Encore Universal Control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243
JEP-100 Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244Routing Control System Mode Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244JEP-100 Panel Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245Copy Panel Template Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
Display Level Tally . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250Kalypso Model Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251KMD (Kalypso Multi Destination) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251KSD (Kalypso Single Destination) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251
SMS Model Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252UCP (SMS Universal Control) Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252EDP (8 Destination Paging) Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252P48 (48 Button) Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253MB8 (Multibus 8) Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254P32 (32 Button) Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254MCO and COS Custom Panels and RIB Box. . . . . . . . . . . . . . . . . . . . . . . . . . 255
Under Monitor Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255RCL Server Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256
RCL Server Screen Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256Saving and Loading RCL Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261
Tie-Lines and New Router Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . 261Serial Port Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262Interfacing with the RCL Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262RCL Client Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262
Section 7 Tie-Line Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
Tie-Line Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263Tie-Line Terminology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264The Tie-Line Manager Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264
How Tie-Line Manager Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265Tie-Line Properties and Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265Mismatched Tie-Line Workarounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266Tie-Line Manager System Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266Tie-Line Manager Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266
Tie-Line Manager Screen Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267Main Menu Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267System Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268Route Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270Tie Config Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272Src Blocks Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274
Source Restrictions Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274Rooms Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
Tie Status Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278Tie-Lines Status Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
Configuring Tie-Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280Tie-Line Manager Application Access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280Create Tie-Lines in the Router Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280Configuring a New Tie-Line With Tie-Line Manager. . . . . . . . . . . . . . . . . . . . 282
Tie-Line Manager Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
8/11/2019 Grass Valley Encore Control System
11/353
Encore Configuration Manual 11
Contents
Section 8 Additional OUI Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285Local Router Panel (LRP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
Local Router Panel Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286Local Router Panel Screen Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
Destinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
Sources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287Destination/Source Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287Destination/Source Navigation Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
Under Monitor Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287Using the Basic Local Router Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288
Opening the Local Router Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288Selecting a Destination and Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288Finding Destinations and Sources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288Breakaways (and Interlevels) Pane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289Remote Control of the LRP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290Exiting the Local Router Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290LRP Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290Source Aliases. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290
LRP Config Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290Accessing Config Mode Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291Setting up LRP Destinations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291Global Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291Activating LRP Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292To Preview a Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292Parking a Destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292Setting up Salvos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293Interlevel Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
Local Machine Control Panel (LMCP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298Opening the LMCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299Clip Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299
Creating a New Clip on a Video Disk Server . . . . . . . . . . . . . . . . . . . . . . . . . 299Creating a New Clip on a VTR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299Loading a Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299Modifying and Saving Clips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
Device Selection and Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300Setting Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301Automatic Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301Time Base Correction Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302Using the Device Control Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303Transport Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304
Cue Points Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305Using the Cueing Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305Ancillary Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306
Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306Options Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306Dubbing Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307
Clip Assistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309About Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309The LMCP Screen with Clip Assistant Active . . . . . . . . . . . . . . . . . . . . . . . . . 310Clip Assistant Device Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311Tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312Clip Assistant Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313
8/11/2019 Grass Valley Encore Control System
12/353
12 Encore Configuration Manual
Contents
Acquiring Media By Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320Exiting the Local Machine Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
Memory of the LMCP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321Remote Control of the LMCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321LMPC Shortcut Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322
Filer-Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323Terminology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323Opening Filer-Fax. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324Multi-Domain Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324File-Maintenance Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324
Filtering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324Automatic Filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325Filter and Tag-Cats Modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325Logic Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
Save Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330Load Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331Filer-Fax Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332
Pager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333
Overview of OmniPager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333Opening OmniPager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334
Sending a Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334Receiving a Message. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335Replying To a Message. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335FilerFax Shortcut Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
8/11/2019 Grass Valley Encore Control System
13/353
Encore Configuration Manual 13
Preface
About This Manual
This Encore Configuration Manual is designed for facility engineers who areinvolved in Encore system installation, configuration, and servicing.
Documentation Set
The basic Encore documentation set consists of: Installation and Service Manual,
Configuration Manual,
Control Panels Operation Manual, and
Release Notes.
The Installation and Service Manualcontains information about installingEncore system hardware, maintaining Encore system components, andconfiguring network communications used by the system.
The Configuration Manualcontains detailed information about configuringan Encore system to meet the needs of your facility. Background informa-tion about Encore system design is included, and a description of theEncore Operator User Interface (OUI); which is used to configure, test, andoperate the system; is also provided.
The Control Panels Operation Manualprovides operating information for thecontrol panels used with the Encore Control System.
The Release Notescontain information about new features and systemenhancements for a specific software version. Software installation proce-dures are also provided. Always review the Release Notes for your currentsystem software before you begin working with your Encore system.
8/11/2019 Grass Valley Encore Control System
14/353
14 Encore Configuration Manual
Preface
Additional DocumentationDocumentation for various Encore system options is also available:
Encore Soft Panels Instruction Manual, and
Encore Salvo Editor Instruction Manual.
The NetConfig utility program is used to configure your Encore networkand install software:
NetConfig Instruction Manual
Software engineering documentation, intended for third-party developersand in-house software engineers, is also available:
Routing Products Protocols Manual.
8/11/2019 Grass Valley Encore Control System
15/353
Encore Configuration Manual 15
Section1Encore System Overview
Note This same Overview section is included in several Encore manuals. If you arefamiliar with this material you can skip to the next section.
Introduction
The Encore system is an open, scalable platform for full router and facilitycontrol. Featuring tight integration with Grass Valley router matrices,third-party routers, automation systems, and other equipment, the Encoresystem can consolidate media assets under a single, unified control system.
Figure 1. Encore Facility Control System
Encore SystemController(s)
EncoreSerial Controller
VTRs
Profile VDRs
Acts AsGatewayBetweenEN 1 and
EN 2
Encore OperatorWorkstation(s)
Notification viaPager, E-mail
or Phone
Trinix Digital VideoRouting Matrix
Apex Digital Aud ioRouting Matrix
Acappel laRemote Panels
AcappellaRouting Matrices
Encore EthernetControl Panels
PMB
48BEDP
P32
UCP
MB8
P48
XY
BPS
Series 7000Routing Matrices
SMS 7000Control System
ConcertoMulti-Format
Routing Matrix
7500 WB Digital VideoRouting Matrix
7500 NB Digital AudioRouting Matrix
NetCentralSNMP Manager
Distributed Applications:
Serial Interface Options:
System Manager Router Control Panel Servers Tie-Line Manager
Encore EngineeringWorkstation
Windows GUI Applications:
Windows GUI Applications:
Configuration Local Router Panel Local Machine Control Panel Router Status
Local Router Panel
Local Machine Control Panel
Automation
ES Switch/Jupiter 3rd Party Matrix/Tally Horizon Matrix
RS-422
CrosspointBus
8053_
00r0
Encore Controllerwith GSC Option
Encore Controller withRS-422 Serial Option
75C
oax
Series 7000Control Panels
EN 1 Ethernet (Facility LAN) EN 2 Ethernet (Panel/Matrix LAN)
RS-422
8/11/2019 Grass Valley Encore Control System
16/353
16 Encore Configuration Manual
Section 1 Encore System Overview
The Encore system modular design lets broadcasters and other high-quality content creators select just the level of control they need. At its mostbasic, the Encore system can configure and control the crosspoints of asingle routing matrix, but it can be expanded to control multiple matrices.
Controlled HardwareEncore can control a wide range of Grass Valley routers including Trinix,Apex, Concerto, Acappella, 7500 WB, and 7500 NB using Ethernet. Legacy7000 Series and Horizon routers can be serially controlled. In addition,Encore can control the popular Grass Valley Venus routers with a serialinterface to a VM-3000 protocol translator. A wide range of third partyrouters can also be controlled through a number of supported serial inter-faces. Users can also add tally and machine control via Ethernet or serialinterfaces.
Encore System Controller FrameThe two rack-unit Encore System Controller Frame supports up to twoSystem Controller Board (SCB) modules and two power supply modulesfor redundancy. A standard Encore System Controller Frame is equippedwith one SCB and one power supply. All modules are front removable andhot pluggable. Cooling is built into the frame so no external cooling unitsare required.
Figure 2. Encore System Controller Frame
8053_09r0
8/11/2019 Grass Valley Encore Control System
17/353
Encore Configuration Manual 17
Introduction
The System Controller Frame has two slots for SCBs and two slots forPower Supply modules, located behind the front cover/air filter. Statusindicator LEDs and a reset button are located on each SCB (Figure 3).
Figure 3. System Controller and Power Supply Modules
Cabling and power connectors are located on the rear of the System Con-troller Frame (Figure 4).
Figure 4. System Controller Frame Rear View
Multiple Encore System Controller Frames can be used to support large
systems and to increase throughput by dividing tasks among the control-lers. SCBs in the same frame can be configured to control different hard-ware or to operate redundantly. An SCB in one frame can even operateredundantly with an SCB in a different frame.
PowerSupply Modules
Reset Buttons
System ControllerModules8053_
36r0
Slot 1
Slot 2
Slot 1
Slot 2
8053_37_r0
J31USB J19J20J21J29J30
GPIIN
GPIOUT J5J6J7
GSC 4 GSC 3 GSC 2 GSC 1 REF OUT SYNC 2 SYNC 1
CONSOLECONSOLE
J1J2J3J4
J16
J35
J51
COM1
COM2
J52J53
EN1
EN2
J54
J36J37J38J39SIO 45678 3 2 1
J40J41J42J43J44J45J46J47J48J49J50
J17J18 J15J26J27J28J32J33
GPIIN
GPIOUT J12J13J14
GSC 4 GSC 3 GSC 2 GSC 1 REF OUT SYNC 2 SYNC 1
J8J9J10J11
J23J24J25 J22J34USBPS1
PS2
COL LNKLNK COL COL LNKLNK COL
J55
+
J56
COM1
COM2
J57J58
EN1
EN2
J59
SIO 45678 3 2 1
30-60V130W; 3.7A
Serial In/OutConnectors(8)
Com 1Console Port
EN1Ethernet Port
EN2Ethernet Port
SCB Slot 2 Connectors
DCPower
GPI In/OutConnectors(2)
GSC BNCs(8) SyncBNCs(4)
Com 2Port
SCB Slot 1 Connectors
GPI In/OutConnectors(2)
GSC BNCs(8) SyncBNCs(4)
Serial In/OutConnectors(8)
Com 1Console Port
EN1Ethernet Port
EN2Ethernet PortAC
Power
Com 2Port
8/11/2019 Grass Valley Encore Control System
18/353
18 Encore Configuration Manual
Section 1 Encore System Overview
Control PanelsA wide variety of hardware control panels are available that can workacross the room or across the country via IP LAN/WAN connections. ManyGrass Valley legacy hardware control panels can also be used with optionalserial interfaces. Optional PC control panel software is also available that
emulates many of these hardware panels.
The control panel operator views and selects Sources and Destinations byname and does not need to be concerned with the actual physical cablingor numbers of inputs and outputs.
Two representative Encore control panels are illustrated below.
Figure 5. Encore Paging Multi Bus (PMB) Control Panel
Figure 6. Encore Button Per Source (BPS) Control Panel
An Acappella control panel and an SMS7000 control panel, both originallydeveloped for other routing systems but able to be configured to work withEncore, are illustrated below.
Figure 7. Acappella 16x16 Remote Panel
Figure 8. SMS7000 P48 Control Panel
Status 1
De sti nat ion 1
Preset
L eve l
Status 2
De s ti nat ion 2
Status 3
De s ti nat ion 3
Status 4
De sti nat ion 4
Status 5
De sti nat ion 5
Status 6
De s ti nat ion 6
Status 7
De s ti nat ion 7
Status 8
De sti nat ion 8
Destest
IDD
Levelevel Srcrc
DestestPageage
LevelevelPageage
SrcrcPageage
SalvoalvoPageage
Chophop
CEE
Clearlear
ShifthiftA
Prevrev Nextext
Protrot
Holdold
Takeake
Loadoad
Protrot
Holdold
Takeake
Loadoad
Protrot
Holdold
Takeake
Loadoad
Protrot
Holdold
Takeake
Loadoad
Protrot
Holdold
Takeake
Loadoad
Protrot
Holdold
Takeake
Loadoad
Protrot
Holdold
Takeake
Loadoad
Protrot
Holdold
Takeake
Loadoad
8053_03r0
De sti nation Status
Protrot
Lvl 1vl
Chophop
Lvl 2vl 2 Lvl 3vl 3 Lvl 5vl 5
Nextext
Lvl 6vl 6Lvl 4vl 4
Prevrev
All Lvlsll Lvls
Configonfig
Tallyally
IDD
8053_04r0
8053_05r0
GrassValleya
Valley
PROT CHOPID
TALLYLEVEL
ALLLVLS
LVL1
LVL2
LVL3
LVL4
LVL6
LVL5
8053_08r0
8/11/2019 Grass Valley Encore Control System
19/353
Encore Configuration Manual 19
Introduction
Encore System Control Fundamentals
Distributed Control System
The Encore system uses a distributed control networked architecture.
Various Encore software components are installed on different hardwarelocations to perform different tasks. This design provides extraordinarysystem power and flexibility. Configuration files are downloaded over thenetwork to target devices, permitting rapid configuration changes whilethe Encore system remains operational. User-specific system-wide accessprivileges can also be established to restrict system control as appropriate.
Encore Database
Information vital to Encore system operation resides in a collection of datafiles, collectively called the Encore database. These files model the routingmatrix hardware being controlled, name input Sources and output Destina-
tions, determine matrix Levels, and specify the operational capabilities ofthe control panels. The Encore database is created when the system is com-missioned and is typically maintained by facility engineering staff. TheEncore database resides on the same PC as the Sharer.
Sharer Application
The Sharer application automatically downloads configuration informa-tion to Encore system components when they are power up or reboot. TheSharer application runs on a PC, and must be running when the Encoresystem is configured. The Sharer does not need to be running to sustaincontrol panel operation. However, we recommend the Sharer application
run at all times, as this makes it easier to resume configuration procedures.
CAUTION An Encore system can have only one Sharer application running on thenetwork at any time. This is important to remember during software installa-tion, or if a notebook PC with the Sharer is moved to different locations.
Configuration PC
An Encore system is configured using a standard PC installed with theappropriate Encore software. Once configured, Encore control panels willbe able to switch crosspoints on routing matrices even if the configurationPC is turned off or disconnected from the network. Typically the configu-ration PC also has the Encore Sharer application installed, but this applica-tion can reside on any PC on the network.
Sharer PC
The Sharer PC is the PC on which the Sharer is installed. Typically the con-figuration PC and Sharer PC are the same, but separate PCs can be used.
8/11/2019 Grass Valley Encore Control System
20/353
20 Encore Configuration Manual
Section 1 Encore System Overview
Routing Basics
Terminology
Area- An Area is a defined group of Sources and Destinations. Takes arerestricted to connecting Sources and Destinations within the same Area(unless Tie-Lines are used). Defining multiple Areas makes it possible toassign the same easily identifiable Source and Destination names (likeVTR_1, VTR_2) for use by different devices at different locations in thefacility.
Breakaway- A Take operation that switches a Source on at least one Levelthat is different from the Sources selected on the other Levels.
Channel- The communication path used to control the crosspoint group bythe Router Control Engine over a selected protocol such as Serial or
Ethernet paths.Chop- A variation of a Take command that alternately connects each of twodifferent Sources to a single Destination (flip-flopping) at a designatedswitching rate (the chop rate).
Crosspoint- An electronic switch that allows a signal to pass from an inputto an output when the switch is closed.
Destination- The location to which Source signals are routed. A Destinationmay include one or more outputs across multiple Levels.
Exclusion Set- User-determined set of items excluded from control by a par-
ticular control panel. Exclusion sets can be created for Areas, Destinations,Levels, or Salvos. An exclusion set may be shared by more than one panel.
Flag- A parameter that can be set in a control panel template to control howa panel operates.
Level- A grouping of signals of a particular type, such as digital video,audio right, audio left, Red, Green, or Blue, etc. This grouping becomes anindependently controllable stratum of signals within a routing system.
Matrix- A configuration of potentially intersecting inputs and outputs. Inrouting switchers, a matrix is signal switching hardware configured suchthat any input may be switched to any output.
Preset- Selecting an item (for example a Source or Destination) in prepara-tion for an action.
Protect- A control function that prevents control panels or devices fromchanging the current Source selection for the specified Destination.
Salvo- A named, system-wide preset which, when executed, can changecrosspoints on multiple Destinations at the same time.
8/11/2019 Grass Valley Encore Control System
21/353
Encore Configuration Manual 21
Routing Basics
Source- An input signal or collection of input signals generally associatedwith a particular device (like a VTR or DDR). A Source may contain signalsfrom multiple Levels.
Take- The direct, immediate switching of a different Source to a Destination.The Take occurs during the vertical interval for a clean transition.
Template- A set of parameters that can be applied to a control panels con-figuration. The same template can be applied to multiple panels.
Tally- A status acknowledgment returned to a control panel or terminal thatan operation has been executed. Typically this will light up a button, but aTally may report text (for example a Source name).
Tie-Line- A system tie-line is a physical connection used to give a Destina-tion connected to the output of one matrix access to Sources connected tothe input of another matrix. A signal which passes through two or morematrices; more specifically the path (consisting of one or more Tie Wires)which links a Destination of one matrix to a Source of another matrix. Alocal tie-line is a special type that has Sources and Destinations in the samematrix, usually sending the signal out of the matrix for external processing.
Matrix Crosspoints and Levels DescriptionEach router matrix can be broken down into a number of switchingmatrices. A single switching matrix controls the switching (or routing) of aparticular type of electrical signal (e.g. digital video, analog video, audio,data, etc.). These different signal formats are referred to as Levels. When aconnection is made, a path is formed between a unique Source (logical
grouping of physical inputs) and a unique Destination (logical grouping ofphysical outputs). The physical connection is accomplished using cros-spoint circuitry. Figure 9illustrates how a single switching matrix operates.
Figure 9. A Single Switching Matrix
Outputs
8053_
15_
r0
Inputs
0 1 2 3 4 5 6 7 8 9
0
1
2
3
4
5
6
7
8
9
8/11/2019 Grass Valley Encore Control System
22/353
22 Encore Configuration Manual
Section 1 Encore System Overview
Any of the 10 inputs (numbered 0 to 9) can be routed to any of the 10outputs (numbered 0 to 9). One input can also be routed to more than oneoutput. All the possible routes are represented by the intersections of thehorizontal and vertical lines in the illustration. The points where the linesmeet (crosspoints) can be thought of as switches that allow the inputs to beconnected to the outputs. In this example, three crosspoints are on (as indi-
cated by the Xsymbols), and the following routes are made:
Input 2 is routed to Output 1 and Output 4.
Input 7 is routed to Output 6.
Sources and Destinations DescriptionSources consist of input signals to the router, and Destinations are outputsignals from the router. An individual Source or Destination may containmore than one signal. For example, a Source may consist of a video and akey signal; be separate Red, Green, and Blue video signals; or have a videosignal and several associated audio signals. Each signal type is considereda Level. In general, a Source and Destination need to be configured withsame number and type of Levels in order for Takes connecting them to besuccessful.
Multi-Level Switching Description
All Level Take
An all Level Take switches the same input number on all Levels, to the con-trolled Destination, as shown in Figure 10.
Figure 10. Traditional All Level Take
Video Source A (VSA)
Audio Left Source A (ALSA)
Audio Right Source A (ARSA)
DVTR 1
Source Devices Routing Matrix
DestinationDevice
Video Source B (VSB)
Audio Left Source B (ALSB)
Audio Right Source B (ARSB)
DVTR 2
Video Destination
Audio Left Destination
Audio Right Destination
DVTR 3
Audio Level
Video Level
VSA
ALSA
ARSA
VSB
ALSB
ARSB
VSA
ALSA
ARSA805
3_
06
_r
0
8/11/2019 Grass Valley Encore Control System
23/353
Encore Configuration Manual 23
Routing Basics
Breakaway Take
A Breakaway Take is performed by selecting a Source different from theothers (on at least one Level) to the controlled Destination. Breakawaysallow a Destination to use different Sources (Figure 11).
Figure 11. Breakaway Take
Tie-Line DescriptionTie-lines can be used to link different matrices, allowing Sources in onematrix to be routed to Destinations in another matrix. Each tie-line has aSource Name and a Destination Name that defines the signal path. A tie-
line Source is actually a Destination of the first matrix, and the tie-line Des-tination is a Source of the second matrix. Routes that employ more than onetie-line are called multi-hop tie-lines (Figure 12).
Figure 12. Tie-Lines
Video Source A (VSA)
Audio Left Source A (ALSA)
Audio Right Source A (ARSA)
DVTR 1
Video Sour
ce B (VSB)
Audio Left Source B (ALSB)
Audio Right Source B (ARSB)
DVTR 2
Video Destination
Audio Left Destination
Audio Right Destination
DVTR 3
Audio Level
Video Level
VSA
ALSAARSA
VSB
ALSB
ARSB
VSA
ALSBARSB
80
53
_07
_r
0
Source Devices Routing Matrix
DestinationDevice
Matrix 1Sources
8053_
42_
r0
Routing Matrix 1 Matrix 1Destinations
Tie-Line
Tie-Line
Tie-Line Source Name
Tie-LineSource
Name
Tie-Line Source NameTie-Line DestinationName
Tie-Line DestinationName
Tie-LineDestination
Name
Matrix 2Sources
(One Hop)
(Second Hop)(First Hop)
Tie-Line
Routing Matrix 2 Matrix 2Destinations
Matrix 3Sources
Routing Matrix 3 Matrix 3Destinations
8/11/2019 Grass Valley Encore Control System
24/353
24 Encore Configuration Manual
Section 1 Encore System Overview
Once configured on an Encore system, actual tie-line operation is trans-parent to the operator. The Tie-Line Manager application automaticallycreates and releases tie-line paths as needed.
8/11/2019 Grass Valley Encore Control System
25/353
Encore Configuration Manual 25
Section2Encore Fundamentals
Overview
The distributed control architecture of the Encore Control system offersgreat flexibility and power. A basic understanding of this control architec-ture is beneficial for those responsible for installation and configuration.
System Functional LayersOne way to approach the Encore Control system is to think of it as a seriesof layers. The Encore database is the core layer. Each layer above the data-base interacts only with adjacent layers, until the outermost hardware layeris reached (Figure 13).
Figure 13. Encore System Functional Layers
8531_01r0Device Hardwareevice Hadwae
Encore coeDatabaseatabase
SharerApplicationhae pplicatio
OtherApplicationsthe pplicatios
Encore coeSystemystemManagera age
Applicationpplicatio
8/11/2019 Grass Valley Encore Control System
26/353
26 Encore Configuration Manual
Section 2 Encore Fundamentals
The Encore database core contains information that identifies what a par-ticular Encore system consists of and its capabilities. The Sharer applica-tions layer shares this information with the various distributed Encoresystem applications on the next higher layer. These other applications(Router, Tie-Line Manager, Panel Server, etc.) use this database informationto control the hardware device components (Router Matrices, control
panels, etc.) residing on the outer device hardware layer. The SystemManager application spans all the layers. It is used to create the informationin the database, set up how it and other applications are accessed by users,and establish the communications used to span the applications and hard-ware layers. The first time an Encore system is run, a special login applica-tion is used to access the System Manager.
Client/Server ArchitectureThe Encore system can also be viewed as consisting of various softwareapplications (including the applications described above) that run onvarious hardware processors (called Engines). Engines can be EncoreSystem Controllers, or they may be networked PCs (called Stations, whichis short for workstation). The System Manager can be used to assign whichapplications run on which engines. Some of these applications operateusing Client/Server techniques. For example, a Server application residingon one Engine may provide information and processing resources to Clientapplications running on different hardware components. In this way, infor-mation that needs to be shared with multiple Encore system componentscan be managed effectively. An example of this structure is the Panel Serverapplication, which runs on an Encore System Controller and provides con-figuration information to multiple Encore control panels, and other sup-
ported control panel models(Figure 14).
8/11/2019 Grass Valley Encore Control System
27/353
Encore Configuration Manual 27
Overview
Figure 14. Applications, Engines, Clients, and Servers
The Client/Server architecture makes an Encore system scalable, fromsmall single purpose applications to huge facility wide installations. AnEncore system can even support multi-facility operations. Additions can be
made to an existing system by adding components without the need to re-engineer the rest of the system hardware. Processing workloads can be dis-tributed among various engines to prevent bottlenecks, and redundancycan be incorporated for reliable operation.
System Communications During Normal OperationWhen an operator presses a button on a control panel, a series of messagesare passed between client and server applications to accomplish the cros-spoint change and to update button tallies on all the affected Panels(Figure 15). In this example the Panel Server application and the RouterControl applications reside on a separate engines. If they reside on the sameengine, similar communications occur.
85
31
_02r
0
Kalypso VideoProcessorFrame
Engineering Workstation PC(Engine)
(Engine)
Encore Database
RouterControlApplication
System ManagerServerApplication
Encore OUIClient Application
Panel ServerApplication
DifferentApplications
canrunonthesame Engine
Applicationscancontrol multiple
hardware devices.
The same type ofApplicationcanrunondifferent Engines
Sharer
OperatorWorkstation PC(Engine)
(Engine)
Encore OUIClient Application
Serial
Ethernet
VTR
Encore System Controller
(Hardware)Panel Client
RouterCon
trol Panel
(Hardware)Panel Client
RouterControl Panel
(Hardware)Panel Client
RouterControl Panel
Profile VDR
VDRCS Serve
r
Application
(Engine)
VSVC ServerApplication
EncoreSerial Engine
EncoreMachine ControlClient Application
RouterMatrixFrame (Hardware)
RouterClient
RouterMatrix
Frame (Hardware)
RouterClient
Network
8/11/2019 Grass Valley Encore Control System
28/353
28 Encore Configuration Manual
Section 2 Encore Fundamentals
Figure 15. Normal Operation Steps
The following steps are involved:
1. The operator presses a Source selector button for a Destination on acontrol panel. The Panel button illuminates with a false tally.
2. The Panel sends a button press message to the Panel Server application.
3. The Panel Server interprets the message and sends a Source changemessage for that Destination to the Router Control application.
4. The Router Control application interprets the message and sends acrosspoint change message to the Router Matrix hardware.
5. The Router Matrix changes its crosspoint.
6. The Router Matrix sends a message reporting the new status of thatcrosspoint to the Router Control application.
7. The Router Control application sends new Source status informationfor that Destination to the Panel Server application.
8. The Panel Server application receives the new status and sends it to thecontrol panels.
9. All the affected control panels then change their button tally to reflectthe new status of the Destination. The false tally on the initiating controlpanel changes to a true tally.
RouterControl Panel
Panel Client
RouterControlApplication
Encore System Controller
Panel ServerApplication
Encore System Controller
Panel Client
RouterControl Panel
RouterMatrixFrame
RouterClient
85
31
_03r
0
NetworkEthernet
Panel buttonpressed.1
Buttontally updated on
all panels.
9
2
3
4
Matrix changescrosspoint.
5
6
8
7
8/11/2019 Grass Valley Encore Control System
29/353
Encore Configuration Manual 29
Overview
It can take up to four seconds to update all the control panel tally statuseson a large Encore system. If the requested crosspoint change fails to occur,the false tally on the initiating control panel reverts to the actual Sourceselection for that Destination after a time-out.
Distributed Configuration and Status DataThe Encore systems varying hardware components and flexible capabili-ties means various types of configuration and status information arerequired. This information specifies what the system does and how its com-ponents work together.
The Encore system employs a distributed database mechanism. A compre-hensive database exists that contains all the Encore system configurationinformation. Portions of this principle database are then copied to variousEncore system components where it is needed. This allows the system tocontinue normal operation even if the device storing the comprehensive
database goes off-line or is otherwise unavailable. This also allows an oper-ating Encore system to remain on-line while it is being re-configured. Thisis especially powerful with control panels, which can be remotely reconfig-ured instantly to acquire different operating functions. Control panels alsoautomatically receive a default configuration (from previously definedtemplates) as soon as they are added to the Encore network.
With a distributed database, the various copies of the data must be synchro-nized. Various methods are used to accomplish this. In general, when anEncore component is operating in Sharer mode, that means it is in syncwith the comprehensive database managed by the Sharer. If in Local mode,the local database information is not being updated by the Sharer and so
may not be synchronized. Commands are available (Modify, Load, Save,etc.) to force the synchronization of the database information.
Another important aspect of the Encore system is reporting accuratesystem status information. The current status of the system (for example,which Sources are routed to which Destinations), must be available tomany Encore components so they can display the correct Source and Des-tination names and tallies. Memory maps are used to for this purpose.Memory map information cascades up from the Matrices for display on thecontrol panels.
Figure 16illustrates the concept of a distributed database, templates, and
memory maps.
8/11/2019 Grass Valley Encore Control System
30/353
30 Encore Configuration Manual
Section 2 Encore Fundamentals
Figure 16. Encore Distributed Database Information
Automatic Detection of Database MatchEncore 1.7.3 and newer software automatically detects whether the Sharerand SCB flash memory have correctly matching databases, and automati-cally go to Sharer mode if they are identical.
If the Sharer shuts down on the network, each Router Controller andControl Panel Server goes to Localfiling mode. Now, whenever the RouterController or Control Panel Server detects the Sharer, they check the copyof the database on the SCB Flash against the Sharer database. If the data-
bases match, these applications automatically go back toSharerfiling mode.This check is also performed when the Router Controller or Control PanelServer starts up. If the databases match, the Sharer database is not down-loaded, which significantly reduces the time delay to full operation.
85
31
_04r
0
Engineering Workstation PC
De
fine
dAreas
De
fine
dEng
ines
De
fine
dWor
kstations
De
fine
dAp
plications
User
Logons
Perm
iss
ions
Pane
lTemp
lates
Leve
ls
Destination
s
Sources
Encore Systemdatabase
System Manager
Sharer
Encore System Controller
Router Controller database
Temp
lates
Temp
late
Control Panel Matrixdatabase (one Matrix)
Panel Serverdatabase
Leve
ls
Destinations
Sources
Global Memory Mapof Logical Source andDestinationStatuses
Destinations
Sources
Local Memory Map ofPhysical CrosspointStatusesinthisMatrix
Matrixdatabase (one Matrix)
Destinations
Sources
Local Memory Map ofPhysical CrosspointStatusesinthisMatrix
ButtonStatus,Source, Destination,and Level Names
Temp
late
Control Panel
ButtonStatus,Source, Destination,and Level Names
Temp
late
Control Panel
ButtonStatus,Source, Destination,and Level Names
System ManagerconfiguresUsers, Engines, Applications,Permissions, etc.
Sharermanagesdistributionof database informationtoEncore system components
Leve
ls
Destinations
Connections
Sources
Global Memory Map ofPhysical CrosspointStatusesincontrolledRouterMatrices
Router Controller Application Commands:
Modify: SavesRouterdatabase to theEncore System database (via the Sharer)
Reload Database: LoadsEncore Systemdatabase informationto Routerdatabase
Re-Sync Router: Pollsmatricesandsynchronizesroutermemory map withactual crosspoint statuses.Re-Sync Matrix: Sendsroutermemory mapto Matrices, changing crosspoint settingsifnecessary to match.
Panel Server Application Commands:
Load Template: Loadsselectedtemplate forediting.
Save Template: Savesthe editedtemplate.
Copy Template to Panel: Copiesthecurrently selected template to aselected Control Panel
Copy Panel to Template: Copiesthesettingsof the curently selectedControl Panel to a selected Template.
Ethernet
Network
8/11/2019 Grass Valley Encore Control System
31/353
Encore Configuration Manual 31
Overview
RedundancyTo ensure reliable Encore system operation, various forms of redundancyare available. For example, System Controller frames can be equipped withredundant power supplies. The power supply with the greatest load isautomatically used by the frame. Providing power from separate circuits to
each power supply helps ensure power to the frame will not be interrupted.
System Controller frame cans also be equipped with two System ControllerBoards (SCBs). Applications running on different SCBs can be configuredin Master/Slave pairs, such that if one SCB fails the applications on theother SCB automatically take control without any interruption of systemoperation. In Encore 1.7.3 and newer software, redundancy mode informa-tion is stored in the memory of the frame and validated. This ties redun-dancy mode settings to the frame slot, not the SCB. Applications can beMaster/Slave paired on SCBs in the same frame, or SCBs in differentframes can be used to provide even more robust redundancy. When SCBredundancy is being used, the databases on both SCBs must remain syn-
chronized for proper operation should a change-over occur (Figure 17).
Figure 17. Encore Redundancy
Database BackupsThe Encore systems comprehensive database is an extremely important setof information, since it supplies data to all the other system components.This database can be backed up by copying the OMN directory and its col-
MirrorMasterPanel Server
MirrorMasterRouterController
Primary SCB (left slot)
MirrorSlavePanel Server
PowerSupply #1
PowerSupply #2MirrorSlave
RouterController
Backup SCB (right slot)
Encore System ControllerFrame
RouterMatrix Frame
MatrixController#1
MatrixController#2
PowerSupply #1
PowerSupply #2
853
1_
04r
0
Engineering Workstation PC
Encore System database Sharer
Each powersupply canindependently powerthat entire frame.
Whendevicescomeon-line theirapplicationsreceive configurationinformationfromthe Sharer.
Mirrored Masterand Slave applicationseach hold a complete set ofconfigurationinformationforwhat they control.
Failure of one mirrored device immediately makesitstwintake control.
Ethernet Network
RouterControlPanel
RouterControlPanel
If the Sharerisnot availablewhenanapplicationcomeson-line, it will use itslocalversionof configurationinformation.
If neitherthe MasterorMirrorRouterControllerisavailable,the Matrix retainsitscurrent
crosspoint settings.
8/11/2019 Grass Valley Encore Control System
32/353
32 Encore Configuration Manual
Section 2 Encore Fundamentals
lection of subdirectories to a safe location. Doing this whenever the database changes is a recommended practice, since file corruption is a possi-bility with any computer hardware. Should the Encore database file setbecome damaged, the backup database can be quickly reloaded to rapidlyrestore full system configuration capabilities. Because of the distributeddatabase architecture, even if the comprehensive database file becomes
unusable the Encore system remains operational. Crosspoints will remainat their current settings, and Source to Destination Takes continue to beavailable from all operating hardware control panels or other control points(Automation, Router Control, Soft Panels, etc.).
Encore Software ApplicationsAn Encore system consist of a suite of software applications, all of whichare accessed through the Encore user interface.
Local ApplicationsLocal applications accessed from the Encore User Interface include:
Start User log-on button.
Pager Electronic messages between users.
Filer Database access window.
Local Router Panel Configurable full function software control panel.
Local Machine Control Panel Software machine control panel, requires
external engine.
Remote ApplicationsRemote applications are the backbone of the Encore system. Remote appli-cations are accessed by users once they log into the Encore system. Eachapplication authorized for that user appears as an additional button in theEncore User Interface.
Control Panel Server Application
This application services up to 128 control panels. Through the Encore UserInterface, the user sets the personality of the control panels. The ControlPanel Server application also services all RCL clients, such as an M-2100Master Control system, Kalypso Video Production Center, or a third-partyautomation system.
8/11/2019 Grass Valley Encore Control System
33/353
Encore Configuration Manual 33
Encore Software Applications
Router Control Application
This application receives switching requests from the Panel Server applica-tion and sends them to the Matrices for execution. Through the Encore UserInterface, the user establishes crosspoint functionality, such as Levels,Sources, Destinations and protocol drivers.
Tie-Line Manager Application
This application controls the tie-lines in the system. Tie-lines provide trans-parent routing of signals between local matrix Levels and remote matrices.Through the Encore User Interface, the user creates and manages tie-lines.
System Manager Application
The system administrator uses this application to set the permissions andsystem access for all users. It is also used to configure the hardware sup-porting the Encore Control System software.
8/11/2019 Grass Valley Encore Control System
34/353
34 Encore Configuration Manual
Section 2 Encore Fundamentals
8/11/2019 Grass Valley Encore Control System
35/353
Encore Configuration Manual 35
Section3Encore OUI Description
Common Display Features
Encore DesktopWhen you logon to the system, the Encore Desktop appears (Figure 18).
Figure 18. The Encore Desktop
Help Bar
Menu
Bar
Task Bar
Local OUI Application Icons
Start-up /Shut DownIcon
Tiles Where Remote Application Icons Appear
8/11/2019 Grass Valley Encore Control System
36/353
36 Encore Configuration Manual
Section 3 Encore OUI Description
Help Bar As you move the mouse pointer around thescreen, the Help Bar displays information on the areas it
passes over.
Clock Cl