ONLINE GRADE BOOK GRADES 6-8 NEW SCHOOL YEAR SETUP

GUIDE SHEET MIDDLE SCHOOL VERSION 090914

BEFORE STARTING MAKE SURE YOU ARE USING THE MOST

CURRENT DISTRICT UNIFORM GRADING POLICY SPECIFIC TO

YOUR SUBJECT AREA AND/OR GRADE LEVEL AS SUPPLIED BY

THE OFFICE OF CURRICULUM AND INSTRUCTION. THIS

DOCUMENT CAN BE FOUND IN THE CURRICUM SECTION YOUR

ONCOURSE ONLINE LESSON PLANNER OR YOUR SCHOOL’S

WEBPAGE LOCATED ON THE DISTRICT WEBSITE.

HOW TO SET UP WEIGHTED GRADES GUIDE SHEET

 

_____________________________________________________________________________________________________________________________________ Guide Sheet - Set up Weighted Grades Powerteacher Gradebook 2.8 Page MEDIA SERVICES & TECHNOLOGY 090914

1

Getting Started - Launching The PowerTeacher 2.8 Gradebook Please use these directions for opening your teacher grade book the first time you try and open your grade book in school or at home. There is a new version and requires a small program to be installed on your machines. You do not need administrative access; all staff can do this at school and at home.

1. Log into PowerTeacher with your username and password.

2. In the blue box, you will see run installer the first time you open grade book. Click on “Installer”. PLEASE NOTE YOUR WILL ONLY DO THIS THE FIRST TIME YOU LOAD YOUR GRADE BOOK.

3. Then in the area “Step 1”, click the download installer button.

4. Click on your download button in Safari, you will see it downloading. When it finishes, double-click the file, Gradebook.dmg.

5. A new window will pop up, double-click the box to install the program.

HOW TO SET UP WEIGHTED GRADES GUIDE SHEET

 

_____________________________________________________________________________________________________________________________________ Guide Sheet - Set up Weighted Grades Powerteacher Gradebook 2.8 Page MEDIA SERVICES & TECHNOLOGY 090914

2

Getting Started - Launching The PowerTeacher 2.8 Gradebook

6. Accept the warning when it pops up.

7. Click “Run” when prompted to run the installation program.

8. A box will come up letting you know it has successfully been installed.

9. Now launch your grade book by clicking the “Launch” button.

HOW TO SET UP WEIGHTED GRADES GUIDE SHEET

 

_____________________________________________________________________________________________________________________________________ Guide Sheet - Set up Weighted Grades Powerteacher Gradebook 2.8 Page MEDIA SERVICES & TECHNOLOGY 090914

3

10. Click your downloads button again and

then double-click the file, “LaunchGradebook.ptg”.

11. Click “Open” in the dialog box.

12. You grade book will open. (Note: You might be asked to “Terminate Other Sessions", if you are prompted, click to terminate.)

Repeat Steps 9-11 whenever you want to launch your grade book in the future.

HOW TO SET UP WEIGHTED GRADES GUIDE SHEET

 

_____________________________________________________________________________________________________________________________________ Guide Sheet - Set up Weighted Grades Powerteacher Gradebook 2.8 Page MEDIA SERVICES & TECHNOLOGY 090914

4

Getting Started - The Process

When setting up your grade book at the beginning of the year, three actions need to take place in order to have accurate grading and student reporting: 1. F1 (End of Year Grade): End of Year Final Average - F1 [Set Term Weights (not

points) for All Quarters & All Classes]

2. Category + Weighting: Test / Quiz / Home Work / PPRL / Class Work [Set Categories – for the current school year] 3. Quarterly Grades: Q1, Q2, Q3, Q4 and All Classes

[Set for Q1, Q2, Q3, Q4 and All Classes]

HOW TO SET UP WEIGHTED GRADES GUIDE SHEET

 

_____________________________________________________________________________________________________________________________________ Guide Sheet - Set up Weighted Grades Powerteacher Gradebook 2.8 Page MEDIA SERVICES & TECHNOLOGY 090914

5

Setup – F1 Final Grade

Log into Power Teacher, On the Start page, click Gradebook, Scroll down the page and click Launch Gradebook.

Select your first class to work with, then go to the Grade Setup button on the top menu. 1. Double Click on “F1” for the “Reporting Term” 2. Select “Term Weights”

3. Click into cell to confirm Weight 100, Percent 25.0% for each quarter. Click Save

If You Teach Half -Year Classes S1 & S2 - See Page 9

[Set the F1 for each class – Use “Copy” button]

HOW TO SET UP WEIGHTED GRADES GUIDE SHEET

 

_____________________________________________________________________________________________________________________________________ Guide Sheet - Set up Weighted Grades Powerteacher Gradebook 2.8 Page MEDIA SERVICES & TECHNOLOGY 090914

6

Copy to F1 to all other classes

1. Right click on F1 and select “Copy Grade Setup - - F1 Only” 2. Then select Q1, Q2, Q3, Q4 as shown below and click next to verify, then click Finish

HOW TO SET UP WEIGHTED GRADES GUIDE SHEET

 

_____________________________________________________________________________________________________________________________________ Guide Sheet - Set up Weighted Grades Powerteacher Gradebook 2.8 Page MEDIA SERVICES & TECHNOLOGY 090914

7

Setting Up Categories in Powerteacher By default PowerTeacher lists Homework, Project, Quiz and Tests categories but you need to add “Classwork” and/or modify to your needs. NOTE: The steps below may vary depending upon your specific needs.

Go to the Categories Pane on the bottom left corner. 1. Add or Modify categories as shown on the left. 1. Test 2. Quiz 3. Homework 4. PPRL 5. Classwork

2.Give Category a name and Abbreviation. 3. Adjust the “Points Possible” if needed.

Now that your categories have been created, we need to put them into

the Q1 Reporting Term and weight them.

HOW TO SET UP WEIGHTED GRADES GUIDE SHEET

 

_____________________________________________________________________________________________________________________________________ Guide Sheet - Set up Weighted Grades Powerteacher Gradebook 2.8 Page MEDIA SERVICES & TECHNOLOGY 090914

8

Setup – Quarterly Weighting Q1 Class Go to the Grade Setup button on the top menu. 1. Select a Class (not a homeroom) that want to work with by clicking on the particular period.

Go to the Grade Setup button on the top menu. 1. From the “Classes” Pane select a class to work with. 2. Click on “Q1” for the “Reporting Term”

Double Click on “Q1” Reporting Term 3. Select “Category Weights” 4.Click the button to show all categories 5. Select all the categories you want to weight, click OK

6. Now click on the “weight” for a given category and enter in the percentage. (make sure all categories should add up to 100% when complete) 7. Click the save button on the bottom left corner of your screen.

HOW TO SET UP WEIGHTED GRADES GUIDE SHEET

 

_____________________________________________________________________________________________________________________________________ Guide Sheet - Set up Weighted Grades Powerteacher Gradebook 2.8 Page MEDIA SERVICES & TECHNOLOGY 090914

9

Setup – Quarterly Weighting Class Copy - Q2, Q3, Q4 Now that grade weighting is set up for the class you selected in Q1, now let us “copy” our weighting setup to all our other reporting terms.

 

1. Right click on “Q1” for the “Reporting Term” or press “Control” key on keyboard & click at the same time. (This is the setup you will be copying FROM)

2. Click “Copy Grade Setup – Q1 Only”

PLEASE NOTE Make sure you are using the most current district uniform grading policy, specific to your subject and grade level as supplied by the office of curriculum and instruction. This document can be found in the curriculum section your OnCourse online lesson planner or your school’s webpage located on the district website found at www.irvington.k12.nj.us

HOW TO SET UP WEIGHTED GRADES GUIDE SHEET

 

_____________________________________________________________________________________________________________________________________ Guide Sheet - Set up Weighted Grades Powerteacher Gradebook 2.8 Page MEDIA SERVICES & TECHNOLOGY 090914

10

Setup – Quarterly Weighting Class Copy - Q2, Q3, Q4

3. From the “Copy Final Grade Setup” Window select “Reporting Term” Q2, Q3 and Q4 that

you will be copying the grade setup TO

4. Click “Next”, confirm the changes on the next screen and click “Finish”.

HOW TO SET UP WEIGHTED GRADES GUIDE SHEET

 

_____________________________________________________________________________________________________________________________________ Guide Sheet - Set up Weighted Grades Powerteacher Gradebook 2.8 Page MEDIA SERVICES & TECHNOLOGY 090914

11

Quarterly Weighting – Setup Mixed Classes / Subjects

Please Note: If your weighting is the DIFFERENT for each of your classes then repeat the steps on Page 7 for each class.

S1 & S2 Final Grade – Setup Half -Year Classes

Please Note: If you teach semester courses you don’t have an F1 setup. Instead set term weighting for S1 50% and S2 50%.

Check For Accuracy

F1 - End of Year Grade: My Term Weights are set to Q1 25% - Q2 25% - Q3 25% - Q4 25% If I teach Semester Classes My Weighting is S1 50% - S2 50% This has been done for each of my classes. Category + Weighting: a. My Categories have been added or modified to -

1. Test 2. Quiz 3. Homework 4. PPRL 5. Classwork

b. My category weighting has been set to the UGP specific to my subject area and/or grade level for this current school year.

Quarterly Grade Weighting: Each of my classes has been weighted for each quarter Q1, Q2, Q3 & Q4. Congratulations you have set up your grade book for this academic year!