1
Shown: Calacatta Bianco 5.5x33 Cappucino Beige Calacatta Oniciato Crema Marfil Mosaic (Crema Marfil Shown) Grigio Orobico Calacatta Bianco 20x20* 3x20 Floor Bullnose* 4x12 Floor/Wall 5.5x33 Floor/Wall Notes: The 20x20 matte finish is a pressed product, while the 20x20 polished finish is rectified, and nominal sizes between the two finishes will vary. It is not recommended to utilize both the polished and the matte finish in the same installation setting due to this size variation. Manufacturer does not recommend installing large format rectangular tile using a staggered brick/running bond grout joint pattern. Joint locations can be random and should be positioned to be no less than 30% of the length of the adjacent tile (<30%). Alternating joints, straight-lay, 1/3 and less or herring bone patterns are acceptable with a grout size to be no less than 1/8” (>1/8”). SIZES SPECIFICATIONS Application Floor/Wall Visual Marble Type H.D.I.T. Porcelain Slip Resistant No PEI Rating 4 Frost Resistant Yes Shade Variation Moderate/High Screens/Faces 13 * Available in two different finishes: Polished and Matte. 3x3 Mosaic 12x12 Sheet* V3 iMarmi Made in Italy FIELD TILE IWT–Tesoro Porcelain & Ceramic Collection 56 RECTIFIED (Polished Only), PRESSED (Matte Only)

RECTIFIED (Polished Only), PRESSED (Matte Only)

  • Upload
    others

  • View
    10

  • Download
    0

Embed Size (px)

Citation preview

Page 1: RECTIFIED (Polished Only), PRESSED (Matte Only)

Shown: Calacatta Bianco 5.5x33

Cappucino Beige

Calacatta Oniciato

Crema Marfil Mosaic (Crema Marfil Shown)

Grigio Orobico

Calacatta Bianco

20x20*

3x20 Floor Bullnose* 4x12 Floor/Wall

5.5x33 Floor/Wall

Notes: The 20x20 matte finish is a pressed product, while the 20x20 polished finish is rectified, and nominal sizes between the two finishes will vary. It is not recommended to utilize both the polished and the matte finish in the same installation setting due to this size variation.

Manufacturer does not recommend installing large format rectangular tile using a staggered brick/running bond grout joint pattern. Joint locations can be random and should be positioned to be no less than 30% of the length of the adjacent tile (<30%). Alternating joints, straight-lay, 1/3 and less or herring bone patterns are acceptable with a grout size to be no less than 1/8” (>1/8”).

SIZES SPECIFICATIONS

Application Floor/WallVisual MarbleType H.D.I.T. PorcelainSlip Resistant NoPEI Rating 4Frost Resistant YesShade Variation Moderate/HighScreens/Faces 13 * Available in two different finishes: Polished and Matte.

3x3 Mosaic 12x12 Sheet*

V3

iMarmi

Made in Italy

FIELD TILE

IWT–

Teso

ro P

orce

lain

& C

eram

ic C

olle

ctio

n

56

RECTIFIED (Polished Only), PRESSED (Matte Only)