TABLE OF CONTENTSPage

For Future Reference ................................................................................ 1

Consumer Publications .............................................................................. 1

Safety Instructions ...................................................................................... 2

Using Your Dishwasher .............................................................................. 3-7

• Hot Water is Essential ........................................................................ 3

• Preparing Dishes ................................................................................. 3

• Loading Your Dishwasher .................................................................. 3-5

• Using Detergent and Rinse Aid ......................................................... 6-7

Selecting Cycles and Options/Starting Dishwasher ............................. 8-9

Special Tips ................................................................................................... 10-13

• For Best Results .................................................................................. 10

• Water Conditions ................................................................................ 10-11

• Energy Saving Tips ............................................................................. 11

• What Can and Cannot Be Washed ..................................................... 12

• Maintaining the Dishwasher .............................................................. 13

• Changing Panels .................................................................................. 13

Before You Call For Service ..................................................................... 14-15

Warranty ....................................................................................................... 16

FOR FUTURE REFERENCECongratulations oll your choice of a Maytag For future reference we suggest you retain this

Jetclean'" dishwasher, As you use your new manual after recording the model number anddishwasher we know you will appreciate the serial number of this dishwasher in the spaces

many features that provide unsurpassed provided. This information can be found on the

cleaning and capacity along with energy data plate located o11the upper left comer of the

efficiency and dependability, tub opening.

On the following pages you will find a wealth of ModelNumberinformation regarding all aspects of your

beautiful new dishwasher. By following these

instructions eareflllly; yon will be able to achieve SerialNumberexcellent results with your dishwasher. Should

you have any questions about using your Maytagdishwasher, contact us. Be sure to provide the

model number of your dishwasher. WARNING - Check with installer tomake sure appliance has been

MAYTAG CONSUMER EDUCATION grounded to avoid possible electricalONE DEPENDABILITY SQUARE shock. Be sure you read theNEWTON, IOWA 50208 IMPORTANT PERSONAL SAFETY

(515) 791-8911 INSTRUCTIONS on page 2 before you(Mon.-Fri. 8 ana-5 pm CST) start to use this dishwasher.

CONSUMER PUBLICATIONS

For additional information order the following booklets from Maytag at the prices indicated. Send your

name, address, booklet title, form number emdpayment to: Maytag Consumer Education, OneDependability Square, Newton, IA 50208. Allow 6-8 weeks for delivery.

Innovative Ideas for Today's Kitchens 1 22PR ..................................... $1.00

Appliance Buying Guides .............................................................. 50¢ EACH

Washer- 211YG

Dryer -- 212YG

Dishwasher -- 213YG

Electric Range -- 214YG

Gas Range -- 215YG

Refrigerator -- 276YG

PAGE

IMPORTANT PERSONAL SAFETY INSTRUCTIONS

Products with a (_ label have been listed with 8. Be careful not to touch the heating element

the Underwriters" Laboratories, Inc. - those with on the bottom of the tub during or at the

a CSA tag have been listed with Canadian completion of a cycle. It may be hot.Standards Association. Nevertheless, as with any

other equipment using electricity and moving 9. Use only detergents and rinse additives

parts, there is a potential hazard. When using designed for an automatic dishwasher. Never

your dishwasher, follow basic precautions, use soap, laundry detergent, or hand

including the following: washing detergent in your dishwasher. Keep

1. Read all instructions before using the these products out of the reach of children.

dishwasher. 10. Do not sit, stand on or abuse the door or

2. Use the dishwasher only for its intended dish racks of the dishwasher.function.

11. Under certain conditions, hydrogen gas may"

3, Disconnect electrical power to dishwasher be produced in a hot water system that hasbefore attempting to service, not been used for two weeks or more.

4. To avoid electrical shock hazard, the sides Hydrogen gas is explosive, If the hot water

and back must be enclosed, and the front system has not been used for such a period,panels must be attached before electrical turn on all hot water faucets and let the

power is applied to the dishwasher. Refer to water flow from each for several minutes.the installation instructions for proper

grounding procedures. This will release any accumulated hydrogen

5, Connect to a properly rated, protected and gas. As the gas is flammable, do not smoke or

sized power supply circuit to avoid electrical use an open flame during this process.

overload, 12. Do not wash plastic items unless marked

6. Children should never be permitted to "dishwasher safe" or the equivalent. For

operate, or play in, with, or around this plastic items not so marked, check thedishwasher, manufacturer's recommendations.

7. To reduce the risk of injury when loading 13. Do not tamper with controls.items to be washed, sharp or pointed items

should be located with the handles up. Also, 14. Always remove the door to the washing

load sha W items so they are not likely to compartment when rerctoving an old

damage the door seal. dishwasher from service or discarding it.

SAVE THESE INSTRUCTIONS

PAGE 2

USING YOUR DISHWASHER

Hot Water is Essential Loading Your Dishwasher

For good cleaning and drying results, hot water Seldom will households have identical dishes;is necessary. The water should be 120°-140°E If, tile number and type of articles used will vary

for any reason, the temperature of the water daily. Your dishwasher is designed to be flexible

being delivered by the water heater is below and accommodate a wide variety of dishes and120°F, select the Temp Boost Sensor option to utensils. The following instructions and pictures

have your dishwasher heat the water until proper will help you become familiar with your

temperature is reached, dishwasher. With experience, you will learn thebest arrangement for your particular needs.

To cheek water temperature, turn on the hot

water faucet nearest the dishwasher. Let water General Recommendationsrun into a glass in the sink until it is as hot as

possible, then check with a candy or meat • Place all items on racks so they are separatedthermometer. If the temperature at the faucet is and face the center to insure the water spray

below 120°F (49°C), have a qualified person will reach the soiled surfaces. Do not allow

raise the water heater thermostat setting, items to extend out of the racks.

Before starting the dishwasher, turn on the hot • Make sure the movement of the upper andwater faucet and let it run until the water is hot. lower spray arms is not blocked by items

hanging below the lower rack or tall articles inthe upper rack.

Preparing Dishes• Insure the free flow of water to the detergent

• It is not necessary to rinse dishes before cup by not blocking it with large items.placing them in your Maytag dishwasher.

Simply serape offbones and large pieces of • Larger, flat, lightweight items (such as plasticcovers) may be wedged next to the silverware

food. The food disposer in your dishwasher

can handle a variety of items such as pits, fruit basket or along the sides and back of the racks.

seeds, popcorn and toothpicks. These items • The wash tower rises through the center of the

will be chopped into small pieces during drain lower rack during the cycle. For the bestand removed with the drain water, If hard cleaning results, avoid blocking it or loading

items get into the dishwasher module, you tail articles next to it.

may hear chopping noises during drain. Thesesounds are normal. A_oidblocking

• Foods that have been burned onto cooking

utensils will need to be scraped or soaked.

• Certain foods, such as mustard, mayonnaise,

lemon juice, vinegar, salt or dressings may

cause stainless steel flatware to rust and pit ifallowed to remain in contact with the surface

for a period of time. Therefore, it is best torinse these food soils off stainless steel flatware

unless the dishwasher is to be operated soon

a_er loading.

• If your dishwa._her drains into a food wastedisposer, make eertain the disposer is

completely empty" before starting thedishwasher to provide for proper draining.

PAGE3

Upper Rack The hinged shelf can be used to stack two levelsof cups, juice glasses, and other short items.

The upper rack of your dishwasher is designed Load small diameter items under shelf so water

with flexibility in mind. Glasses, cups, small will reach upper tier. When the shelf is folded

plates, howls, pans, etc. can be loaded in many up, this area can be used for taller glasses,different positions to suit your needs, stemware, etc.

The rack is designed so dishes can be centeredbehind a single tine and held in place by the

rack's support wires. Dishes can also be loaded at

an angle to maximize space.

The upper rack may be removed if desired.Push inward on the front of the rack rail ends to

When loading glassware, leave a small space unsnap. Remove rail ends and pull out rack.between each piece so they do not touch each To replace rack: reinsert rack, place rail ends in

other during the wash cycle. Do not place position and snap fronts into place by pushingglasses over the tines, outward.

PAGE 4

Lower Rack Flatware

Large dinner plates and other dJsbes may be Put flatware in the removable silverware basket,

placed in any convenient location in the lower mixing knives, forks and spoons. To preventrack but soiled surfaces should face the them from nesting together, place some handles

center, up and some dowla. However, sharp or pointed

items should be loaded with the handles up.Tall items such as bakeware and large platters

should be loaded on the left side of this rack. The silvmware basket may be removed for ease

Thin items (cookie sheets, pizza pans, etc.) may of loading or unloading.be placed behind the folding shelf. With the

shelf down, two levels of glasses and anps can be Use the covered section for smaU, lightweight

loaded. For best washability, do not place any, articles such as measuring cups and spoons,items in the short tines when the shelf is being small plastic items, baby spoons, etc. Lower theused. cover to keep these items in place.

Small items such as plates, sancers or shallow

bowls mW be loaded in the elevated area behindthe wash towen

PAG E 5

Using Detergent and Rinse For water hardness of 13-14 grains, acidAid additional detergent (l teaspoon for each grain

over 12) at the beginning of the main wash

Detergent portion of the cycle. (Open door, acid detergent

Use only a powder or liquid detergent designed to bottom of tub, close door and dishwasher willfor an automatic dishwasher. Use fresh detergent continue through cycle.)

and store it in a cool, dry place (not under If water is 15 grains or harder, it will be virtually

kitchen sink). Never use laundry detergent impossible to get good results with anyor hand dishwashing detergent in your dishwasher. The only solution is a mechanical

dishwasher as it will cause severe water softener to improve water quality:oversudsing.

Recommended Amount to Use Adding Detergent

The amount of detergent to use depends on tile Add Detergent to Dispenser Cup Just Before

water hardness (measured in grains per galIon-- You Select the Cycle and Options,

gpg) and the amount of soil on the dishes. Normal Cycle or Pots & Pans

Generally detergent amounts should be Place proper amount of detergent in both theincreased for harder water and heavier soil. Prewash and Main Wash cups. Close the lid.

Too little detergent can result in poor cleaning, Detergent will be released automatically into the

hard water filming and spotting, and poor drying, prewash and main wash.

Overuse of detergent (especially in chemicallysoftened water) can cause permanent etching Light/Chlna(cloudiness) of glassware. For detergents with Place the proper amount of detergent in the

Main Wash cup only. Close the lid. Thelow phosphate content (8.7% or less) the usagelevel may have to be increased. The phosphate detergent will be released antomatically into thecontent is shown on the side of the box. main wash.

A basic guideline is one teaspoon of detergent Quick Wash/Rinse

for each grain of water hardness (gpg). Use a Place the proper amount of detergent in theminimum of three teaspoons (one tablespoon) in Prewash cup only. Close the lid. The detergent

soft water. Refer to the chart below, will be dispensed immediately.

NOTE: When using an ultraor concentrated Rinse & Hold

dishwashing detergent follow" Do NOT use detergent in this cycle.manul_acturer's suggested amounts.

WATER HARDNESS* DETERGENT USE

Soft (0-3 grains) 3 teaspoons

Medium (4-9 grains) 4-9 teaspoons

Hard (10-12 grains) 10-12teaspoons

*Yourlocalwaterutilitycan tellyouthe exactdegreeofhardnessofyourwatersupply.In ruralareas,yourstateuniversityextensionservicecantell youhowto testyourwaterhardness.

PAGE 6

Rinse Aid

Your Maytag dishwasher features an automatic

rinse aid dispenser, located near the detergentdispenser on the door interior. Using a rinse aid

improves drying results and reduces spotting and

filming.

To fill, turn dispenser cap counterclockwise to

open. Remove cap and pour liquid rinse aid into

the opening. Replace cap and turn clockwise toLESS setting. If you have hard water or desire

improved drying or spotting results, turn the cap

toward the MORE setting to dispense morerinse aid.

The clear indicator in the center of the cap

changes from dark to light when the reservoir is

nearly empty. This indicates that it is time torefill the dispenser.

PAGE 7

SELECTING CYCLES AND OPTIONS/STARTING DISHWASHER

APPROX.

CYCLE SETTING SEQUENCE CYCLE TIME WATER USE

RINSE & HOLD:

Use to rinse a relatively" few-soiled dishes Rinse 7 Min. 2 Gal.which are to be held until the dishwasher isfull. Turn knob to Rinse & Hold.

QUICK WASH�RINSE:

Use to quickly wash dusty or very lightly"soiled Wash 5 Gal.dishes you wish to store or reuse immediately. 2 Rinses 17 Min.Turn knob to Quick Wash/Rinse.

LIGHT/CHINA:

Use for china and crystal and for loads Rinse 7 Gal.containing medium to light amounts of soil. Main Wash -41 Min.Turn knob to Light/China. 2 Rinses

Dry .... 35 Min.

76 Min. + Heating Delay-*

NORMAL CYCLE:

Use for washing loads containing normally PreWash 9 Gal.soiled dishes. This would include dishloads Rinse

with problem soils. Turn knob to Normal Main Wash - -- 49 Min.Cycle. 2 Rinses

Dry - --35 Min.

84 Min, + Heating Delay*

POTS & PANS:

Use for loads with heavy or dried soils. Turn PreWash 11 Gal.knob to Pots & Pans. 2 Rinses

Main Wash - --64 Min.2 Rinses

Dry - --35 Min.

99 Min. + Heating Delay*

*The TEMP BOOST SENSOR may-extend the main wash to heat the water to proper temperature. The HEATINGDELAY indicator will light when the cycle is being extended due to low water temperatures.

PAGE8

Options To Start Dishwasher

Temp Boost Sensor After loading set tile dial to the desired cycle.Press button for desired options.

If for any reason the incoming watertemperature is below 120°F, press the On NOTE: Run the water from the hot water tap tobutton to assure the water is heated to proper clear the line of cold water before

temperature for best cleaning and drying starting.results. The dial will pause at the -_ to extendthe Main Wash and the Heating Delay light will Press the door until it latches. The cycle willturn on. begin with a drain prior to fill and the Wash

indicator will light.Press tlle Offbutton to cancel the Temp BoostSensor. indicator Lights

Heated Rinse and Dry Options The Wash light will glow during all washes and

BINSE TEMP rinses.

Press the Sani button to turn the heating The Heating Delay light indicates that the mainelement on during all rinses. The Sani option wash is being extended to beat the water tohelps maintain water temperature and improve proper temperature.

drying results. Tile Dry- light will be on during the entire dry

Press the Normal button if Sani is not desired, period (with heat on or off) and goes out whenThe heating element will be off in all rinses, the cycle is completed.

FAN DBY Adding a Forgotten ItemPress the Heat b_;tton to turn the heatingelement on during the t_andry period. This For best cleaning, the forgotten item should beoption improves drying results, added early"in the cycle.

Press the Air button to turn the heating element 1. Unlatch the door and wait until the sound ofoff during the fan dry period. Towel drying may circulating water stops.

be necessary. 2. Open the door and add the item.NOTE: Temp Boost Sensor, Rinse Temp and

Fan Dry options can be used separately 3. Pause before latching the door. The eycle willor together, continue at the point it was inten'upted.

PAGE 9

SPECIAL TIPS Todetermi.e rdmo. theglassesisdue to hard water, soak a glassapproximately 5 minutes in undiluted

For Best Results white vinegar. Rinse and dry. fft_dm is

• Hot Water is a Must removed, it is due to hard water (if notremoved, see Soft Water Etching).

Hot water dissolves and activates theTo correct:

dishwashing detergent, dissolves grease ondishes and helps dry glasses spot-free. Make 1. Increase the amount of detergent usedcertain all loads are washed in hot water. Refer according to the degree of water hardnessto page 3 for more information. (see page 6).

• Use Enough Detergent 2. Cheek the water temperature (see page 3).

For proper soil removal, good drying results, 3. Use a rinse aid to improve the sheetingand to prevent filming, etching and spotting, action of the water (see page 7).

an adequate amount of detergent must be To remove _m from dishwasher interior, try

used. We recommend 1 teaspoon of detergent one of the following:per grain of water hardness with a minimum of3 teaspoons. Refer to page 6 on adding 1. Remove with a damp cloth and a mild

detergent, scouring powder.

• Use a Rinse Aid 2. Start emp_ dishwasher on Rinse & Hold

Using a rinse aid improves drying results and cycle. During fill, open door and add 1/2cup white vinegar to water. Allow

reduces spotting and filming. See page 7 for dishwasher to complete cycle. Do not useinstructions on using a rinse aid. detergent. Follow with a regular detergent

• Load the Dishwasher Properly wash.

To insure that all soiled surfaces get adequate • Soft Water Etching

wash action, carefully follow the instructions If the cloudy" film is not removed after soakingfor loading the dishwasher (pages 3-5). Makesure nothing extends above or below the racks in vinegar (previous procedure), then the

condition is etching. This permanent filmto interfere with the movement of the upper occurs in unusual conditions under which the

or lower spray arms. surface of the glass is pitted or eroded. It is

• Select the Proper Cycle permanent.

The cycle needed depends on the amount of In the beginning stages, etching may he

food soil. See page 8 for cycle descriptions, identified by a "rainbow" look--shades of blue,

purple, brown or pink may be seen when the

• Select Heat Dry glass is held at an angle to the light. InFor improved drying select Heat Dry. advanced stages the surface of the glassware

appears frosted, spotted or cloudy.

Water Conditions Certain types of glassware will etch in anydishwasher with the combination of soft water

• Hard Water Deposit (especially mechanically softened), anIf an unusual amount of ealcium is in the excessive amount of detergent, heat and

water, a lime film or deposit may eventually prerinsing. There is no relationship to the cost

build up on the dishes and interior surface of or quality" of the glass.dishwasher. You may first notice this as

"cloudy" glasses.

PAGE 10

To prevent: Energy Saving "lips

1. Adjust the amount of detergent to the You can help save energy if you:degree of water hardness (see page 6).

1. Wash full loads, Running a half-filled2. Lower the water temperature (see page 3). dishwasher uses the same amount of

3. Do not manually" prerinse dishes before electricity and hot water as a fully loaded

loading in dishwashen Prerinsing prior to machine.

loading to remove all food soft aggravates 2. Do not pre-rinse normally soiled dishes.

etching. Select the correct cycle for the load and use

• Rust the recommended amount of detergent forgood washing results without hand rinsing.

Sometimes the dishes or the interior of the

dishwasher may turn a brov_a, red or black 3. Load correctly for best washing results,

color if iron or manganese is in the water. To Incorrect loading may cause poor washing andremove discoloration from dishwasher interior, the need to prewash all or part of the load.

dishes and glassware (no metal items): 4. Use the Light/China cycle when dishes are

1. Select a rust removing compound, such as lightly soiled. It uses less hot water and energyRoVer Rust Remover. It is available from than other cycles.

Maytag Parts Distributors by"using Part 5. Fan dry dishes (without heat) when you don't

No. 57961. need a rapid drying cycle. Allow longer drying

2. Start empty dishwasher on Rinse & Hold or times (overnight).

rinse portion of the cycle. During fill, open 6. Use your dishwasher during off-peak hours.

the door and add 1/2 cup RoVer Rust Local utilities recommend this to avoid heavy

Remover to the water. Allow the usage of energy at eertaiu times of day. Checkdishwasher to complete the cycle, with your utility company to see if off-peak

3. Follow with a detergent wash. rates exist.

The only permanent solution is to installspecial filters which can remove iron and

manganese from the water.

PAGE 1

What Can and Cannot Be manuf_aeturer, simply test-wash a small item for

Washed in Your Dishwasher several weeks before attempting to wash anentire set.

Most tableware, eookware and silverware can be

safely washed in your Maytag dishwasher. If you REMEMBER: It i.sthe user_ responsibility todetermine if dishware should be washed in a

have any doubts about a particular piece of dishwc_she_dishware, check with the manufacturer to see if

it is dishwasher safe. If you cannot reach the

Dishwasher Dishwasher

Material Safe? Special Information Material Safe? Special Information

Alumlnmn Yes, except High water temperature and Pewter No High water temperaturesanodized alu- detergents may affect finish, and detergent mayminum and Cheek cleaning instructions, discolor or pit finish.some cook-

ware. Disposable No Cannot withstand highPlastics water temperatures_ and

Cast Iron No Seasoning will be removed, detergents.and iron will rest.

Plastics Yes Always check

China/ Yes, except Always check manufacturer's If labeled manut;acturer's

Stoneware antique or recommendation before "dishwasher recommendation beforehand-painted washing. Antique hand safe") washing. Plastics vary inchina, painted or over-the-glaze their capacity to withstand

patterns may fade. Gold leaf high water temperaturesmay discolor. If in doubt, and detergents.test-wash a small item forseveral weeks before Stainless Yes Run a Rinse & Hold Cycle

washing an entire set. Steel (select models) if notwashing immediately. Pro-

Crystal Yes, except Always check manufacturers longed contact with foodsantique or recommendation before containing salt, vinegar,

lightweight washing. Some types of milk products or fruit juicedelicate leaded crystal may etch could damage finish.

crystal, with repeated washings.If in doubt, test-wash a Sterling i Yes, except Run a Rinse & Hold Cyclesmall item for several Silver or those with (select models) if not

weeks before washing an Silverplate commercial washing immediately. Pro-entire set. "darkening". longed contact with food

containing salt, acid or

Glass Yes, except Milkglass will yellow with sulfide (eggs, mayonnaise

milkglass, repeated dishwasher and seaibod) could dam-washing, age finish. Commercial

"darkening" may beGold- No Will discolor, removed by detergent.

PlatedFlatware Tin No May rust.

Hollow- No Handles may- be attached Wooden No Always check manu_ac-Handle to the blade with adhesives Items turer's recommendation

Knives which may loosen if before washing. Wooddishwasher washed, may warp, crack or

discolor.

PAGE 12

Maintaining the Dishwasher To Change Panels:

The interior is normally self-cleaning. A. Remove three screws holding the metal trim

Occasionally check the bottom of the dishwasher strip on one side of the door. Take note oftub and clean out pieces of food which may how the trim comes off.

collect there. B. Grasping the lower part of the door panels,

Periodically clean the bottom edge of the bow panels out carefully at the bottom whiledishwasher door liner. Food and liquids drip sliding panels far enough to clear the flangeonto this area when the dishwasher is loaded, on the trim strip which was not removed and

If you notice an odor in your dishwasher, it may" remove panels.

be due to a strong "chemical" or chlorine odor C. Arrange panels so the desired color isfrom the dishwasher detergent. Using a different facing out.

detergent, especially a lemon scented one, will D. Place door panels (notched side up) behindprobably eliminate the odor. In some instances the metal trim at the bottom of the door. Bow

the smell of the rinse additive may be strong, the panels so they fit behind the control

Purchase a fresh package and see if it is better, panel at the top.Lastly, if the dishwasher is run only every coupleof days, an odor may develop. Use the Rinse & E. Slide the panels under the side metal trim

Hold feature daily to remove mayfood soil that which was not removed. To do this, it wil/be

may cause an odor. necessary to compress the backing behindthe colored panels.

To remove an odor, try one of the following:F. Reinstall the metal trim which was removed

1. Place baking soda in both sides of the earlier. To do this, start by inserting the tip

detergent dispenser. Select Light/China and end of the trim strip behind the control

let the water circulate for about 10 minutes, panel. Align the holes and replace the threeStop the dishwasher by unlatching the door screws.and let stand overnight. Then, restart the

dishwasher by latching the door and let it G. The lower access panel is held by four screws

complete the cycle. (two above the panel and two below). Withthese removed, the panel may be removed to

2. Select the Light/China cycle and let the make it easy to change panel colors.dishwasher fill with water. Then open the

door and pour one cup of chlorine bleach into H. With the lower access panel removed,the bottom of the dishwasher. Latch the door remove the foltr screws along the bottom of#O,_ v , -.and let the dishwasher complete the cycle, panel and-_°_x_he tnm which holds the

panels. Once the desired panel is facing out,Clean the control panel and front panel with a replace the trim, and reinstall the panel tosoft damp cloth and liquid spray cleanen Do not the dishwashenuse any abrasive powders or cleaning pads.

Use care when changing panels to be certain you

are not injured on sharp edges and that theChanging Panels

panels are not damaged. If you have any

Your Maytag dishwasher comes with reversible questions concerning changing panels, contact

panel inserts which are pre-assembled at the your local Maytag Dealer.

factory. This enables you to select the color youwant before your dishwasher is installed orchoose another color at a later date.

PAGE13

BEFORE YOU CALL FOR SERVICE

Check these points if your dishwasher... Does not dry properly

Leaves food soil on dishes • Be sure the Heat Dry option is selected.• Use a rinse aid such as Jet-Dry or Cascade

• Check the water temperature. Refer to

page 3. Crystal Clear.• Turn on hot water at kitchen sink before • Cheek the water temperature. Refer to

running the dishwasher to be certain that page 3.hot water is entering the first wash cycle. • Select Temp Boost and Sani Rinse options if

• Select Temp Boost option if available, available.

• Check water hardness. For extreme hard • Increase detergent use according to waterhardness.

water conditions it may be necessary toinstall a mechanical water softener. • Check for improper loading and do not

• Use the amount of detergent recommended overload. Dishes should not nest together.

for your water hardness, and be sure it is put • Plastic items have a porous surface and tendin the dispenser as directed previously, to hold water. Towel drying may be

• Use fresh high phosphate detergent that is required.not caked. Store detergent in cool, dry place. • Glasses, cups, etc., with concave bottoms

• Select proper cycle for soil level of dish load. w/ll hold water.

• Be sure dishes are loaded properly with • When using Quick Wash/Rinse (select

nothing blocking the path of the wash arms, models), towel drying is required.

center spray nozzle or detergent dispenser. Stains or diseolor_ dishes

• Check for nesting of dishes that prevents • Aluminum utensils can leave marks when

water from reaching all surfaces, they rub against other things. Load properly.

• Check to make sure glasses are not loaded • Iron deposits in the water can leave a yellow

over prongs, or brown film on dishes, You may desire to• On convertible models make certain the hot have a special filter installed in the water

water faucet is turned on. supply line, or periodically use RoVer RustRemover (see Water Conditions).

Leaves glassware cloudy or spotted

• Adjust the detergent amount to your water Cycle takes too long - (Heating Delay lighthardness as described on page 6. Avoid stays on)overuse or undernse of detergent. • Temp Boost option has been selected

• Check the water temperature. Avoid which will extend the cycle to heat water

extremely high or low temperatures. Refer thernlostatically. Refer to page 9.

to page 3. • Check to see that the water temperature is

• Use a rinse aid such as Jet-Dry or Cascade at least 120°F.

Crystal Clear. "Clean" light remains on (select models)

• Do not pre-rinse dishes before loading them • On timer models turn dial slightly clockwise

into the dishwasher, to the _.

• Refer to Water Conditions for more • On touch control models Glean stays lit until

information, the door has been open longer than 30seconds.

PAGE 14

BEFORE YOU CALL FOR SERVICE Detergent cup did not empty completely

(continued) * Check to see that the cycle has been

Seems noisy completed.• Water circulation noise is normal. • Be sure dispenser is not blocked from wash

• Humming during drain is normal, action.

• Dishes may not be loaded properly. Dishes • Be sure dispenser is not wet when detergent

should not be touching one another, is added.

• Wash arm may be hitting an item when • Make sure large iteras placed in the front

rotating. Load items so nothing blocks the right comer of upper rack are not blockingwash arm. the detergent cup.

• Chopping or grinding noise may"be heard • Use fresh detergent. Store in dry, cool place.during drain when the internal food disposer Leaks

is chopping hard items such as fruit seeds, • Check to see that the dishwasher is level as

nuts, etc. described in the Installation Instructions.

• Detergent cup lid hits door liner when * Suds can cause the unit to overflow so

dishwasher door is opened at end of cycle measure detergent carefully. Try another

and is normal, brand of detergent. Use only detergents

• Installation (location, flooring, cabinetry, designed for automatic dishwashers.

etc.) can affect noise level. • Make sure you follow directions on how to

• Water valve hiss during fill is normal, acld a forgotten item.

Does not run properly/Won't fiU Has an odor

• Be sure door is tightly closed and latched. • Soiled dishes held too long in the• Check to see that water is turned on. dishwasher can create an odor, therefore we

• The cycle is not properly selected. Be sure recommend using the Rinse & Hold cycle if

the dial is turned far enough or the cycle pad available.

is completely depressed. • Dishwashers will have a "new" smell when

• Cycle will start with drain, first installed.

• Check your home's circuit breaker or fuse • Dishwasher not draining properly. (Seebox. "Does not drain properly")

• Inlet hose raay be kinked. Chips dishware

• Water inlet valve may be clogged with • Be sure dishes are loaded according to the

sediment and in need of cleaning, instructions so they do not strike together

Does not drain properly from the wash action.

• Check to see that the cycle has been • We do not recommend washing fine antique

completed, china and crystal in the dishwasher.

• The dishwasher may be at a pause between • Do not load glasses over rack tines, or allowcycles which is normal, to touch each other.

• Drain hose may be kinked. • Do not overload.

• Elevate the drain hose 32" when installing. For further assistance contact your Maytag

• Check your home's circuit breaker or fuse dealer or call Maytag Customer Service:box. Reset if necessary. U.S. 1-800-688-9900

• Food is backing up in the pipes at the sink. CANADA 1-800-688-2002

If hooked up to a food waste disposer, besure the knock-out is removed from the

disposer and it is mn regnlarly.

PAGE 15

DISHWASHER WARRANTYFull One Year Warranty

Any part which fails in normal home use during the first year after the date of original retail purchase, will be repaired orreplaced free of charge.

Limited Two Year Warranty

Any part which fails in normal home use &]ring the second year from the date of original retail purchase, will be repaired orreplaced free of charge for the part itself, with the owner paying all other costs, induding labor.

Limited Five Year Warranty on Jetclean System and Solid State Controls

Any parts of the Jetelean system includ:mg the complcte power module assembly, center spray nozzle, spray arms, top washarm hose, motor, AND--on Computer Touch Control Models only--any microprocessor mad touch pad assemblies which fail

in normal home use during the second through the fifth year from the date of original retail purchase, will be repaired orreplaced free of charge for the part itself, with the owner paying all other costs, including labor.

Limited Five Year Warranty Against Rust

Should any of the parts listed below rust during the {'we year period starting from the date of original retail purchase, repair orreplacement will be made fiee of charge during the first year. After the first and through the fifth year, repair or replacementwill be made free of charge for the part itself, with the owner paying all other costs, including labor. Pa_s covered by this

warranty are the exterior cabinet and t¥ont panels of convertible models; the exterior front panels of built in models, andNylon mated racks (available on select models).

FULL TWENTY Year Warranty Against Leaks on Dishwasher Tub and Door Liner

Should a water leak develop in the tub or door liner in normal home use dining the TWENTY YEAR period starting from thedate of original retail purchase, repair or replacement of the tub and/or door liner will be made FREE OF CHARGE.

These full warranties and the limited warranties apply when the appliance is located in the United States or Canada.Appliances located elsewhere are covered by the limited warranties only, which inelude parts which fail during the first year.

Canadian Residents

This warranty- covers only those appliances installed in Canada that have been listed with Canadian Standards Associationunless the appliances are brought into Canada due to transfer of residence from the United States to Canada,

This Warranty gives you speeifie legal fights, and you may also have other rights which vary from state to state.

TO RECEIVE WARRANTY SERVICE

First: To locate an authorized service company in your area, contact the Maytag dealer from whom your appliance waspurchased or call Maytag Customer Sen,ice:

US 1-800-688-9900

CANADA 1-800-688-2002

or cheek in your telephone directory yellow pages.

Second: Should you not receive satisfactmy warranty service from the dealer or authorized ser_ice firm, or need furtherassistance, call or write:

Maytag Customer ServieeP.O. Box 2370

Cleveland, TN 37311US 1-800 688-9900

CANADA 1-800-688-21302

When mntactiiJg Customer Ser_4ce be sure to provide the modal and serial number of your appliance, the name andaddress of the dealer from whom you purchased the appliance, and the date of purchase.

Should you still have a problem, write to: Major Appliance Consumer Action Panel, 20 North _%acker Drive, Chicago,

Illinois 60606. MACAP is an industry sponsored but independent group of consumer experts who receive and act oncomplaints from appliance owners.

NOTE: When writing about an unsolved smwice problem, please include the following information:(a) Your name, address and telephone number;(b) Model number and serial number (found on the upper left corner of the tub opening) of your appliance;(e) Name and address of your dealer mad date the appliance was bought;(d) A clear description of the problem you are having;(e) Water hardness, detergent brand mad amount, water temperature, and cycle used.

PAGE 16

DISHWASHER WARRANTYFull One Year Warranty

Any part which fails in normal home use dimng the first },ear after tile date of original retail purchase, will be repaired orreplaced free of charge.

Limited Two Year Warranty

Any part which t:ails in normal home use during the second year fiom the date of ori_nal retail purchase, will be repaired orreplaced free of charge for the part itself, with the owner pa_ng all other costs, including labor.

Limited Five Year Warranty on Jetclean System and Solid State Controls

Any parts of the Jetelean system including the complete power module assembly, center spray nozzle, spray arms, top washarm hose, motor, AND---on Computer Touch Control Models only--any microprocessor trod touch pad assemblies which t;ailin normal home use during the second through the fifth year from the date of original retail purchase, will be repaired orreplaced free of charge for the part itself, with the ow_aer paying all other costs, including lal3or.

Limited Five Year Warranty Against Rust

Should any of the parts listed below rust during the five year period starting from the date of original retail purchase, repair orreplacement will be made free of charge during the first year. At}er the first and through the fifth ),ear, repair or replacementwill be made free of charge for the part itself, with the owner paying all other costs, including labor. Parts covered by thiswarranty are the exterior cabinet and front panels of convertible models; the exterior front panels of built-in models, andNylon coated racks (available on select models).

FULL TWENTY Year Warranty Against Leaks on Dishwasher Tub and Door Liner

Should a water leak develop in the tub or door liner in _orma] home use dining tile TWENTY YEAR period starting from thedate of original retail purchase, repair or replacement of the tub and/or door liner will be made FREE OF CHARGE.

These full warranties and the limited warranties apply when the appliance is located in the United States or Canada.Appliances located elsewhere are eovered by- the limited warranties only, which include parts which fail during the first year.

Canadian Residents

This warranty covers only those appliances installed in Canada that have been listed with Canadian Standards Associationunless the appliaalees are brought into Canada due to transfer of residence from the United States to Canada.

This Warranty gives you specific legal rights, and you may also have other rights which vaD' from state to state.

TO RECEIVE WARRANTY SERVICE

To locate an authorized service company in your area contact the Maytag dealer froln whom your appliance was purchased; orcall Maytag Customer Service. Should you not receive satis_aeto O, warranty service, call or write:

Maytag Customer Ser_/ee240 Edwards St. S.E.

Cleveland, TN 37311US 1-800-688-9900CANADA 1-800-688-200 rz

When contacting Mavtag Customer Service be sure to provide the model and serial number of your appliance, the name and

address of the dealer from whom you purchased the appliance and the date of purchase.

Should you still have a problem, write to: Major Appliance Consumer Action Program, 20 North Wacker Drive, Chicago,Illinois 60606, MACAP is an industry sponsored but independent group of consumer experts ,a_o receive and act oncomplaints from appliance owners.

NOTE; Wherl writing about at_ unsolved se_xice problem, please include the following in_brmation:(a) Your name, address and telephone number;(b) Model number and seri'a/number (found on the upper left corner of the tub opening) of your appliance;

(el Name and address of your dealer and date the appliance was bought;(d) A clear description of the problem y_n are ha_ing;

(el Water hardness, detergent brand and amount, water temperature, and cycle used.

PAGE 16