26
WINCHES & FLEET ACCESSORIES SECTION 13

WINCHES & FLEET ACCESSORIES

  • Upload
    others

  • View
    5

  • Download
    0

Embed Size (px)

Citation preview

Page 1: WINCHES & FLEET ACCESSORIES

WINCHES & FLEET ACCESSORIES

SECTION 13

Page 2: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com 1.013

Winches & Fleet AccessoriesSection 13

CD 3 CONTINUOUS DUTY WINCH— The best cable pullingwinch your money can buy for long continuous pulls. Comes in anew reduced size package incorporating the best features of theAdams CD Winches you've used for years and loaded with newperformance features and value.

� Specifically designed for the placement or removal ofcommunication cable or electrical conductors, in both aerial orunderground applications

� The Adams CD3 Winch is rated for continuous duty in compliancewith SAE J706, and has a bare drum pulling capacity of 24,000lbs. (106.8 kN)

� Helical gears drive the winch for high efficiency and durableperformance

� Installation was simplified to give this winch the lowest installedcost compared to any other continuous duty winch in its class

� The compact design, 51.85 in. wide, allows easy mountingbetween the cabinetry of your line trucks

� For ease of installation, we supply SAE rated bolt-on mountingbrackets. For ease of removal for service or remounting in a newchassis, welding has been eliminated.

� Hydraulically driven, our Three Speed Transmission provides true"shift-on-the-fly", using the two spool valve supplied

� Full Load Brake, is a spring applied, hydraulically released.Designed to hold the rated load up to 24,000 lbs. on a bare drum.The brake is non-directional, meaning you can pull-in or power-out when required without overheating.

� Level-wind mechanism for 7/16 in., 1/2 in. or 9/16 in. wire rope(specify exact o.d.), which distributes the wire rope onto the drumin tight, even lays. The Level-wind can be supplied in overwind orunderwind configuration at no additional charge.

P/N Description Weight (kgs)70524 CD3 Winch w/Ball Bearing Drum 1600 lbs. (725)75267 CD3 Winch w/Ball Bearing Drum 1800 lbs. (816)

& Offset Shaft

ADAMS WG INTERMITTENT DUTY WINCH— Adam's WGwinches are ideal for applications requiring intermittent, heavy dutyoperation. These winches are ruggedly built to deliver long, trouble-free service life.

� 20,000 lbs. (89Kn) pulling capacity (bare drum)� Drum storage capacity for 7/16 in. (11 mm) wire rope is

1400 ft (425 meters)� Level-wind mechanism for 7/16 in. (11 mm) wire rope. Wraps the

wire rope onto the drum in tight, even layers.� Integral 2 speed hydraulic motor� Adjustable full load brake with automatic engagement

when drum rotation is reversed� Pneumatically actuated clutch� Hydraulically actuated disc brake to control free-spool payout� Choose either left or right hand extension shafts with 1000 lbs.

(4.45 kN) rating

P/N Description Weight (kgs)70530 Adams WG Intermittent Duty Winch 890 lbs. (404)70590 Winch WG w/Left Hand Levelwind 890 lbs. (404)08140 CR Reel for WG Winch Only 82 lbs. (37.19)

P/N 08140 CR Reelfor WG Winch

Page 3: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com 2.013

Winches & Fleet AccessoriesSection 13

UNIVERSAL SWIVELSHEAVE 25000 LB.—Permits winches to pull wirerope from any angle within theoperational limits of amaximum rated winch line pullof 25,000 lbs.-force (111.2 kN)for underground applicationsand 14,000 lbs.-force (62.3kN) for overhead applications.

� Applications include telephone and utility vehicles, mining,logging and general industry

� The UV-25 sheave assembly is a ruggedly constructed weldmentdesigned for safety, ease of use, long life and minimummaintenance

� Designed to swivel 360° on anti-friction hardened steel balls

P/N Description Weight (kgs)70202 Universal Swivel Sheave 25000 lb. 1600 lbs. (725)15836 Universal Swivel Sheave 3.3 lbs. (1.5)

Mounting Sockets

CD LITE WINCH— Designed to capably handle your innerduct andfiber/coax placement requirement, it features a smaller cube andreduced weight, making it a perfect fit in today's "downsized" fleet.

� For ease of installation, we supply SAE rated bolt-onmounting brackets

� Single-section gear type motor rated @ 2300 psi operating/30gpm max

� 390 ft./min. maximum line speed; 105 rpm @ 30 gpm � Drum capacity of 2500 ft. of 5/16 in. wire rope � Instantaneous full load brake - spring applied; hydraulically

released, designed to hold the rated load up to 7,400 lbs. on abare drum. The brake is non-directional, meaning you can pull-inor power-out when required without overheating.

� Counterbalance valve installed in the hydraulic circuit to eliminateback-roll drum rotation

� Air-shift clutch makes free spool operation simple. Push a buttonto engage or disengage the drum clutch and pull off the wire rope.

� Level-wind mechanism for wire rope, which distributes the wirerope onto the drum in tight, even lays. The Level-wind is suppliedin underwind configuration.

� Clutch position sensing - This feature gives you an indicatorlight which indicates if the drum clutch is engaged or if thedrum is in free-spool mode

P/N Description Weight (kgs)70601 CD Lite underwind with standard frame 500 lbs. (226)70602 CD Lite underwind with extended frame 574 lbs. (260)

and 2,000 lb. rated drum shaft extension

UNIVERSAL SWIVELSHEAVE 7400 LB.—This swivel sheave wasdesigned to operate with theCD Lite Winch, which has amaximum rated load of7,400 lbs (32.9 kN).

� The UV 7.4 will swivel 360° continuously allowing the winch topull from any angle in a wide range of applications within it'sload capacity

� Sheave assembly is a rugged steel weldment designedfor long life and low maintenance

� Sheave assembly will operate with 1/4 in. and 3/8 in.(6 mm and 10 mm) diameter wire rope

P/N 70651 Universal Swivel Sheave 7400 lb.Weight: 50 lbs. (22.7 kgs.)

Page 4: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com 3.013

Winches & Fleet AccessoriesSection 13

UNIVERSAL SHEAVEBLOCK — The UniversalSheave Block when used withan Overhanging Floor Socket(P/N 70249), permits cablepulls upward, downward, orsideways without the use ofsnatch blocks.

� The assembly consists of aspecially designed sheave with two square shanks which lock intothe Overhanging Floor Socket, fastened to the rear deck of thetruck body

� When an upward pull is desired, the bottom shank islocked into the socket

� For a side pull, the side shank is used

P/N 70234 Universal Sheave Block Weight: 45 lbs. (20 kgs)

FLOOR SOCKETS —Available in both Overhangingand Floor Types, these socketsgive you a secure way to mountand use the Universal SheaveBlock or the HydraulicallyLimited Cable Puller.

Overhanging SocketThis socket is fastened to therear deck of the truck body tothe rear cross channel. It issupplied with a removable 5/8in. X 5 in. "SL" connecting pinto hold attachments in place.

P/N 70249 OverhangingSocket Weight: 28 lbs. (12 kgs)

Star Shaped Floor SocketThis socket is mounted flush tothe body deck forward of the rear cross channel of the truck. It holdsthe Universal sheave in the usual position or at a 45° angle whenrequired. It is supplied with mounting hardware and a removable 5/8in. X 5 in. "SL" connecting pin to hold attachments in place.

P/N 70250 Star Shaped Floor Socket Weight: 20 lbs. (9 kgs)

WINCH LINE SPRING,HOOK & CLEVIS — Ahigh-grade steel springand one piece forgedhook used in the loop of aderrick load line toprevent the wire rope fromburying itself in the pole.

� Hook mushroom head slipsinto the the loop eye

� Spring is placed between the loopand the hook

� When the pole sets, pressure on the wirerope is released, expanding the spring anddropping the rope

� Both components can be used in many other lifting applicationswith any wire rope up to 3/4 in (19 mm) dia.

� Spring is 2-1/8 in. (54 mm) OD x 18-7/16 in. (47 cm) long� Clevis offers wide 1 in. (25 mm) opening for large pulling eyes.

Clevis rated for 15,000 lbs. (6804 kgs) and is approx.7 in. (178 mm) long.

� Screw Pin Shackle has a capacity of 9-1/2 tons (8618 kgs). Hotdip galvanized

P/N Description Weight (kgs)01109 Spring 4 lbs. (1.8)01365 Hook 4 lbs. (1.8)70334 Clevis 3 lbs. (1.3)75265 Screw Pin Shackle (clevis and pin) 3.5 lbs (1.6)

ADSS HYDRAULIC WINCH CABLE PONY— The GMP CablePony winch offers the constant pulling tension of a double capstandrive and the flexibility of a direct drive drum in one machine.

� Max. Pulling Capacity: 2200 lbs (1000 kg)� Rope Speed Max.: 130 ft/min (40 meters/min) at capstan

P/N 70613 Hydraulic Winch Cable PonyWeight: 1350 lbs. (612 kgs)

01109

75265

01365

70334

Page 5: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com 4.013

Winches & Fleet AccessoriesSection 13

OVERHEAD LINE WINCH— The Trailer Mounted Overhead LineWinch is a compact, transportable unit for overhead line stringingwork. The self-contained winch is powered by an 11hp gasolineengine and the precise control required is provided by the hydrauliccircuit. There are drums for various applications and these areeasily interchanged.

� The winch can be towed behind even small vehicles, and it'slightweight and can be easily positioned by one technician.Operational stability is provided by ground anchors on the towbaror by using the towing vehicle as an anchor.

� The Overhead Line Winch is designed to meet the needs ofoverhead line engineers. The various options permit use on aerialbundle (ABC), Copper, Aluminum and ACSR Conductors.

P/N Description Weight (kgs)70625 Trailer Mounted Overhead Line Winch 551 lbs. (250)29642 Split drum for retrieving conductor 59 lbs. (26.7)70624 Drum 27.5" dia.(700 mm) fitted 139 lbs. (63)

with 2000 ft. (600m) of 5/16" (8 mm) dia. Paraline rope

LIGHTWEIGHT CAPSTAN WINCH — The machine consists of angasoline engine driving a right angle gear reduction unit whichoutputs to a small capstan. The assembly is frame mounted andpositioned over a manhole for lifting or pulling operations.

� Unit lifts or pulls up to 2200 lbs.� Powered by a commercial duty 8 HP Honda engine directly

coupled to a right angle gearbox results in low maintenanceand reliability

� Frame manufactured from zinc plated tubular steel� Crossbar stabilizer stores in unit's frame for compact

transport and storage

P/N 70627 Lightweight Capstan Winch Weight: 218 lbs. (99 kgs)

CB TRAILER DRAWBAR —The CB Drawbar serves thedual purpose of both a drawbarand load binder. Two standardlag screws or bolts are required(not supplied). They areinserted through the holesdrilled in the drawbar channel,securing the drawbar to theking pole. The remaining polesloaded around the king pole are lashed securely to the king pole withthe cable of the pole binder. A pole binder handle with a maximumdiameter of 1-5/16" will fit the pole binder lever socket.

P/N 08137 CB Trailer Drawbar Weight: 88 lbs. (40 kgs)

PORTABLE POLE BINDERThe Portable Pole Binder wasdesigned to bind several polesto a pole trailer. This cinchingdevice features ratchet typeaction with a spring loadedpawl to prevent accidental pull-outs. The drum holds 18 ft.(5.5 m) of 5/16 in. (7.9 mm)wire rope for binding as manyas six average-size poles atone time. A pole binder handle with a maximum diameter of 1 5/16in. (33 mm) will fit the pole binder lever socket.

� Material: Cast Steel ASTM A27, Class 65-35

P/N Description Weight (kgs)81390 Portable Pole Binder w/ 18 ft. Sling 21 lbs. (10)81392 Portable Pole Binder w/ 18 ft. 3.25 lbs. (1.47)

Sling Only81393 Portable Pole Binder w/ 8 ft.Sling Only 2.15 lbs. (0.97)

Page 6: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com 5.013

Winches & Fleet AccessoriesSection 13

2-7/16 IN. BAYONETSHAFT— Due to manyrequests, GMP is offering aversion of our bayonet shaftsuitable for use with your owndesign. Manufactured from thesame alloy that is used in ourstandard shaft extensions.

NOTE: Fabrication Required

P/N 70520 Bayonet ShaftWeight: 13 lbs. (5.8 kgs)

CR COLLAPSIBLEPOWER REEL

� Used for rapidly stringing ortaking up wire or smalldiameter cable

� Mounts on any 2-7/16 in.(62 mm) winch drumextension shaft orcapstan drive

� 3500 lbs. (1600 kgs)maximum allowable pull,1600’ of 1/4 in. (490 m of 6 mm) rope maximum capacity

� Reel ID – 20 in. (50.8 cm), OD Expanded – 28 in. (71.1 cm), ODCollapsed – 18.75 in. (47.6 cm)

NOTE: Only use as a pulling capstan, and not for storage, whenpulling in most synthetic ropes and pull tapes.

ELECTRIC CAPSTAN HOIST

� A versatile 1,000 lbs(453.6 kgs) capstan used foroverhead and undergroundlifting andpulling operations

� Requires a 115 Volt AC andprovides rope speed up to40’ (12.2m)/min at maximumload

� A remote Foot ControlSwitch is included

P/N Description Weight (kgs)89600 1000# Electric Capstan Hoist 48 lbs (21.8)89620 Steel Storage Box Only 36 lbs (16.3)89621 Rope Lock Device 2 lbs (.9)89622 Universal Bracket 26 lbs (11.8)89610 Electric Capstan Hoist Complete Kit 112 lbs (50.8)

05610Plug

03614Bolt

Page 7: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com 6.013

Winches & Fleet AccessoriesSection 13

POLE TRAILER LIGHT KIT— Transport utility poles with greatervisibility while meeting DOT requirements.

POLE TRAILER CHAIN BINDER

P/N Description Weight (kgs)70274 46 in. (117 cm) Wide w/4-Way Plug 26 lbs. (12)

for wood poles only70276 46 in. (117 cm) Wide w/6-Way Plug 26 lbs. (12)

for wood poles only70277 24 in. (61 cm) Wide w/4-Way Plug 14 lbs. (6.5)

for wood poles only70278 24 in. (61 cm) Wide w/6-Way Plug 14 lbs. (6.5)

for wood poles only70279 24 in. (61 cm) Wide w/6-Way Plug 14 lbs. (6.5)70280 46 in. (117 cm) Wide w/6-Way Plug 26 lbs. (12)70367 46 in. (117 cm) Wide w/7-Way Plug 26 lbs. (12)70368 24 in. (61 cm) Wide w/7-Way Plug 14 lbs. (6.5)

CAPSTAN DRIVE—Gives your mobile hydraulicequipment the capacity to runour line of power reels andcapstans. So, even when yourvehicle doesn't have a winch,you can still afford the benefitsof GMP's highly productivecable placing tools, like our 32in. Torque Limiting Capstan or our universal C.R. Reel, using thiseconomical device.

� Features a Bell standard 2-7/16 in. (62 mm) bayonet shaft and ahighly efficient planetary gear reduction that rotates on rollerbearings and is powered by a compact, continuous duty singlestage motor

� At maximum flow of 15 gpm (57 l/m) and operating pressure of2250 psi (15 500 kPa), the capstan shaft can achieve 58 rpm anddevelops 13,000 in. lbs. (1469 N-m) of torque

P/N 70329 Capstan Drive Weight: 125 lbs. (56.7 kgs)

POLE TRAILER STRAP BINDER

P/N Description Weight (kgs)71566 46 in. (117 cm) Wide w/7-Way RV Plug 26 lbs.

for wood or non-wood poles (12)71567 46 in. (117 cm) Wide w/4-Way Plug 26 lbs.

for wood or non-wood poles (12)71568 24 in. (61 cm) Wide 4WX6W 14 lbs.

for non-wood poles (6.4)71569 46 in. (117 cm) Wide w/6-Way Plug 26 lbs.

for wood or non-wood poles (12)71570 46 in. (117 cm) Wide w/4-Way Plug 26 lbs. (12)76532 Flag Drilled Replacement Set 6 oz. (170 g)

Pole Trailer Chain Binder Pole Trailer Strap Binder

CAPSTAN— This general purposecapstan is used for a wide variety ofpulling and hoisting applications.

� Cast from a high strength aluminumalloy for low weight

� Will fit on any 2-7/16 in. (62 mm)diameter winch extension shaftequipped with a bayonet or pin typemount

� The working surface is 7-1/4 in. diameter x 8 in. (184 mm x 200mm) wide. The maximum allowable pull is 4000 lbs. (1814 kgs)

P/N 10727 Capstan Weight: 21 lbs. (9.5 kgs)

Page 8: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com 7.013

Winches & Fleet AccessoriesSection 13

P/N 07280 B Wheel Chock(Wooden) - w/Metal Handle9 x 10 x 5 in. (229 x 254 x 127mm) Weight: 9 lbs. (4 kgs)

P/N 70038 Wheel Chock(Rubber) - w/Pigtail Handle 6.75x 9.25 x 8 in. (171 x 235 x 203mm) Weight: 11 lbs. (5 kgs)

P/N 70175 Wheel Chock(Wooden) - w/Metal Handle andthru Bolts 9 x 10 x 5 in. (229 x254 x 127 mm) Weight: 9 lbs.(4 kgs)

P/N 06409 Spiked Shoes -Optional spiked shoes add extranon-skid gripping on icy surfaces,loose dirt or gravel (order two perchock) Weight: 1 lb. ea. (453.6 g)

P/N 09034 C Wheel Chock(Rubber) - w/Metal Hairpin Handle9.75 x 7.75 x 5 in. (248 x 197 x127mm). This chock is designedfor utility vehicles with up to 17 in.(432 mm) wheels. Weight: 10 lbs.(4.5 kgs)

WHEEL CHOCKS—OSHA requires wheel chocks forvehicles over 3/4 ton whenparked on an incline or whenbeing loaded or unloaded by apower lift. Make sure yourvehicle or trailer is properlychocked with thesesturdy chocks.

� Chocks made from eithersolid oak or black moldedrubber. The solid oak chocksare actually several pieces ofwood joined together attongue-and-groove joints andlaminated under highpressure with waterproof gluefor all-weather strength.

www.GMPtools.com+1.215.357.5500

Pole Trailer Light Kits Transport Utility Poles with Greater Safety

� DOT approved lights and reflectors� Plugs into trailer to provide turn

signal and brake lights

� Made from an aluminum extruded weldment withdurable, bright yellow polyester powder coating

� 24 in. (61 cm) and 46 in. (117 cm) widths available

� Cord can come equipped with 4-way,6-way or 7-way trailer plug

� Uses a Reflexite® label with3 in. (76 mm) tall lettering

� Light kits also available fornon-wooden poles

MADE INU S A

P/N 70327 Wheel Chock(Hardwood) - w/Steel Tread 6 x9 x 10 in. (152 x 229 x 254 mm)Weight: 11 lbs. (5 kgs)

Page 9: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com

Product Listing by DescriptionIndex

P/N Description Section Page

06849 1 H Strand Puller 3/8” – 2 2.0

08720 1 Haven’s Grip 1/8” – 1/2 2 2.0

87268 1-1/2 Ton Manually Lever 2 1.0

87269 1-1/2 Ton Manually Lever 2 1.0

66003 1-1/4” x 2’ Head Section 2 4.0

66000 1-1/4” x 6’ Extension Se 2 4.0

66005 1-1/4” x 6’ Head Section 2 4.0

66001 1-3/4” x 6’ Extension Se 2 4.0

75245 1,000 MCM Ratchet Cutte 9 3.0

89426 1/2 in. Std. rod Kit wit 5 5.0

89424 1/4 in. Std. rod Kit wit 5 5.0

87141 10 PSI Propane Regulator 11 3.0

75247 1000 MCM Cable Cutter 9 1.0

70519 12V Battery Cordless 3 9.0

15310 21’ (6.4m) Fiberglass Ha 2 4.0

15439 216 C Tool 5/8” dia. (16 10 2.0

70433 216 C Tool 7/8” dia. (22 10 2.0

70482 216 C Tool with Security 10 2.0

70431 24 in. Cable Block Pus 1 5.0

71550 24” (61cm) Sheave Only 1 2 7.0

10553 3 Sheave Cable Block 1 8.0

24061 3-Pair 22/24 AWG RJ11 7 2.0

91606 3-Roller OH Cab le Gui 1 9.0

91604 3-Roller OH Cable Guid 1 9.0

91605 3-Roller OH Cable Guid 1 9.0

75268 3-Roller Starter Guide 1 9.0

24193 3’ (.9m) Fiberglass Hand 2 4.0

09700 3/8 in. Ratchet Wrench 9 4.0

89425 3/8 in. Std. rod Kit wit 5 5.0

70432 36 in. Cable Block Pus 1 5.0

87210 4 in. Overlash Cable B 1 6.0

24042 4 Pair Shielded Modular 7 2.0

27043 4 Pair Shielded Modular 7 2.0

38100 4 Roller Cable Block 1 6.0

10554 4 Sheave Cable Block 1 8.0

24062 4-Pair 22/24 AWG RJ45 7 2.0

64264 4” Utility Snatch Block 2 3.0

70450 45 Degree Corner Block 1 2 6.0

70439 45 Degree Corner Block w 2 6.0

70454 45 Degree Double Corner 2 6.0

75246 500 MCM Cable Cutter 3.5 9 1.0

75248 556 ACSR Ratchet Cutters 9 3.0

03165 6’ (1.6M) Bridle Rope 1 1.0

24194 6’ (1.8m) Fiberglass Han 2 4.0

30415 6” Manila Rope Snatch Bl 2 4.0

25798 6” Wire Rope Snatch Bloc 2 4.0

75000 750 Cable Block 1 6.0

75249 750 MCM Ratchet Cutters 9 3.0

24065 8-Contact Cat. 6 Plugs 7 2.0

30411 8” Manila Rope Snatch Bl 2 4.0

70628 8” Wire Rope Snatch Bloc 2 4.0

P/N Description Section Page

71563 90 Degree 3-Roller Ins 1 9.0

70449 90 Degree Corner Block 1 2 6.0

70438 90 Degree Corner Block w 2 6.0

70455 90 Degree Double Corner 2 6.0

17126 A6S Die For AMP Shielded 7 3.0

25547 A8S Die For AMP Shielded 7 3.0

70133 AC Electric Ventilation 5 4.0

71667 Adapter Tool of Extensio 2 4.0

71572 Adapter, Angle Umbrella 12 1.0

71647 Adapter, Angle with 1 P 12 1.0

07350 Adjustable Manhole Shiel 5 2.0

70613 ADSS Hydraulic Winch 2 12.0

70615 ADSS In Line Blocks 2 12.0

70616 ADSS In Line Blocks 2 12.0

70595 ADSS Starter Blocks 2 12.0

70614 ADSS Starter Blocks 2 12.0

70621 ADSS Starter Blocks 2 12.0

70055 Aerial Cable Guide 1 8.0

89009 Aftercooler System for C 3 1.0

89302 AirStream Generator 3 4.0

89300 AirStream w/Power Supply 3 4.0

70451 Alligator Wrench 2 6.0

10727 Aluminum Capstan 6 1.0

70363 Aluminum Manhole Platfor 5 4.0

70364 Aluminum Manhole Platfor 5 4.0

10115 Aluminum Test Mandrels 5 11.0

10109 Aluminum Test Mandrels 2 5 11.0

10110 Aluminum Test Mandrels 2 5 11.0

10111 Aluminum Test Mandrels 3 5 11.0

10112 Aluminum Test Mandrels 3 5 11.0

10113 Aluminum Test Mandrels 4 5 11.0

10114 Aluminum Test Mandrels 5 5 11.0

17095 AMP Die for Modular Pres 7 3.0

25943 AMP Die for Modular Pres 7 3.0

06796 Anchor Extractor 10 5.0

30780 Apollo Lasher Storage 1 2.0

74060 B Cable Block Frame End 2 9.0

07133 B Cable Bond 7 oz. (0.2) 10 9.0

68691 B Cable Clip (Clip Only) 10 9.0

07064 B Cable Core Depressor 11 4.0

74218 B Cable Guard 2 11.0

74222 B Cable Guard 2 11.0

74226 B Cable Guard 2 11.0

74228 B Cable Guard 2 11.0

74530 B Cable Reel Jack 86 lbs 6 3.0

68690 B Cable Transfer Clip 2 10 9.0

07196 B Canvas Pocket 12 4.0

07755 B Canvas Tray 12 5.0

07262 B Carding Brush 4 oz. 8 3.0

07658 B Carding Brush Guard 8 3.0

08331 B Chuck 2 9.0

P/N Description Section Page

80779 B Connecting Links 4 4.0

80775 B Connecting Links 1/2 4 4.0

80771 B Connecting Links 1/4 4 4.0

80777 B Connecting Links 3/4 4 4.0

80773 B Connecting Links 3/8 4 4.0

07264 B Gas Cylinder Sling 11 3.0

15326 B Ladder Platform 2 7.0

71691 B Lashed Cable Supports 2 11.0

71692 B Lashed Cable Supports 2 11.0

71693 B Lashed Cable Supports 2 11.0

71694 B Lashed Cable Supports 2 11.0

71695 B Lashed Cable Supports 2 11.0

71698 B Lashed Cable Supports 2 11.0

07621 B Lashing Wire Remover 1 10.0

07449 B Lead Sleeve Slitter 8 4.0

07560 B Lift Shackle 2 5.0

70336 B Overlash Block 1 5.0

74700 B Pressure Gauge 11 1.0

06934 B Pressure Regulator Sha 11 3.0

07713 B Pressure Testing Ell 11 6.0

76760 B Pressure Testing Hose 11 5.0

76761 B Pressure Testing Hose 11 5.0

76762 B Pressure Testing Hose 11 5.0

76763 B Pressure Testing Hose 11 5.0

76764 B Pressure Testing Hose 11 5.0

76765 B Pressure Testing Hose 11 5.0

76766 B Pressure Testing Hose 11 5.0

76767 B Pressure Testing Hose 11 5.0

76768 B Pressure Testing Hose 11 5.0

76769 B Pressure Testing Hose 11 5.0

07267 B Pressure Testing Kit 11 1.0

72673 B Pressure Testing Kit 2 11 1.0

82210 B Pressure Testing Regul 11 2.0

07511 B Ratchet Wrench w/ 4 oz 10 2.0

76001 B Sealing Cord .305 in. 14 1.0

76011 B Sealing Tape .125 in. 14 1.0

08192 B Self-Locking Aerial Ha 2 5.0

79751 B Sheave Support 10/Box 2 9.0

79750 B Sheave Support 6 lbs ( 2 9.0

72410 B Solder 5 lbs. (2.2) 8 5.0

72031 B Splice Covering 20 in. 12 5.0

72030 B Splice Covering 48 in. 12 5.0

68490 B Strand Puller Figure-8 2 2.0

72302 B Strand Tie Strap 2 11.0

72301 B Strand Tie Strap 1.4 l 2 11.0

07781 B Temporary Bond w/ 0.7 10 9.0

08329 B Transfer Cord (22 AWG) 10 5.0

07260 B Water Tool Brush 10 7.0

82732 B Web Slitter for .134” 2 5.0

08273 B Web Slitter for .250" 2 5.0

82733 B Web Slitter for .340” 2 5.0

Page 10: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com

Product Listing by DescriptionIndex

P/N Description Section Page

07280 B Wheel Chock 13 7.0

07667 B Wrench Kit 10 3.0

10999 B-Wire Connections 7 3.0

88282 Bag Carrying Soft .5 oz. 5 7.0

30149 BALL BEARING REPLACEM 4 4.0

70130 Ball Bearing Swivels 10 4 4.0

70136 Ball Bearing Swivels 2, 2 13.0

70140 Ball Bearing Swivels 25 4 4.0

70137 Ball Bearing Swivels 5 4 4.0

70138 Ball Bearing Swivels 7 4 4.0

70507 Battery Charger 1 lb. (0 3 9.0

28243 Battery Lifter 40 oz. 5 12.0

71546 Battery Lifter Complete 5 12.0

71547 Battery Lifter Tray 17 5 12.0

70520 Bayonet Shaft 13 5.0

26303 Bell style Digging Bars 5 2.0

26304 Bell style Digging Bars 5 2.0

89815 Blow Gun Kit 1.25 in. (3 3 11.0

89816 Blow Gun Kit 4 in. 3 11.0

87144 Blower Hose Carrier 16 5 4.0

68681 Bonding Ribbon 10 9.0

06568 Bonding Ribbon Clamp 10 10.0

89742 Bottled Nitrogen Kit 3 8.0

74540 Braked Drum Stand 6 2.0

71408 Breakaway Swivels 25493 4 2.0

71406 Breakaway Swivels 25494 4 2.0

71401 Breakaway Swivels 26305 4 2.0

71403 Breakaway Swivels 26306 4 2.0

71404 Breakaway Swivels 26307 4 2.0

71405 Breakaway Swivels 26308 4 2.0

71399 Breakaway Swivels 26309 4 2.0

71400 Breakaway Swivels 26310 4 2.0

70188 Breakaway Swivels 26325 4 2.0

70191 Breakaway Swivels 26326 4 2.0

53700 Breakaway Swivels 30332 4 2.0

71402 Breakaway Swivels 30333 4 2.0

53699 Breakaway Swivels 33211 4 2.0

53702 Breakaway Swivels 34341 4 2.0

53703 Breakaway Swivels 34342 4 2.0

53704 Breakaway Swivels 34343 4 2.0

53705 Breakaway Swivels 34344 4 2.0

53701 Breakaway Swivels 34786 4 2.0

53706 Breakaway Swivels 34787 4 2.0

89592 Breeze Blown Fiber Kit 3 6.0

32906 Breeze Cable Seal 3 6.0

89011 Breeze Compressor 3 5.0

89010 Breeze Microfiber Blower 3 5.0

89743 Breeze Nitrogen Bottle K 3 6.0

74061 C Cable Block Frame In L 2 9.0

68693 C Cable Clip (Clip Only) 10 9.0

74510 C Cable Drill 1 lb. (.45 8 4.0

P/N Description Section Page

07575 C Cable Sheath Slitter 3 9.0

68692 C Cable Transfer Clip 2 10 9.0

08952 C Carding Brush 6 oz. (1 8 3.0

71670 C Cement 14 2.0

07008 C Desiccant B 160 gram 11 8.0

07017 C Desiccant B 325 gram 11 8.0

07009 C Desiccant B 650 gram 11 8.0

07013 C Desiccant C 4 oz.bag 11 8.0

75980 C Drop Wire Reel 38 lbs. 6 2.0

75530 C High Pressure Gas Regu 11 2.0

75531 C High Pressure Gas Regu 11 2.0

82211 C High Pressure Gas Regu 11 2.0

82213 C High Pressure Gas Regu 11 2.0

15443 C Ladder Platform 2 7.0

76040 C Ladder Tent Canvas Cov 12 2.0

75481 C Pressure Flange 25/pk. 11 7.0

75482 C Pressure Flange Plug 2 11 7.0

77170 C Pressure Gauge 4 lbs. 11 1.0

77171 C Pressure Gauge Case on 11 1.0

77172 C Pressure Gauge w/18 in 11 1.0

76770 C Pressure Testing Hose 11 5.0

76771 C Pressure Testing Hose 11 5.0

76772 C Pressure Testing Hose 11 5.0

76773 C Pressure Testing Hose 11 5.0

76774 C Pressure Testing Hose 11 5.0

70221 C Pressure Testing Pump 11 1.0

84850 C Pull Finder w/ Case 2 2.0

07254 C Reel Payout Frame 2 3.0

07516 C Regulator Wrench 10 3.0

72412 C Solder Large Spool 8 5.0

72411 C Solder Small Spool 1 l 8 5.0

70053 C Temporary Bond 10 9.0

08330 C Transfer Cord (19 AWG) 10 5.0

69145 C Valve Stem Cap Packag 11 7.0

69144 C Valve Stem Cap Package 11 7.0

09034 C Wheel Chock 13 7.0

07143 C2 Lasher Storage Case 1 1.0

06291 Cable Bender Strap 4 8.0

86571 Cable Bending Shoe 4 9.0

86570 Cable Bending Shoe 3 in. 4 9.0

17022 Cable Bending Tool 15 lb 4 8.0

73305 Cable Block 1 5.0

87071 Cable Cutter 2/0 Copper 9 1.0

15304 Cable Cutter 2/0 in. 10 9 1.0

67970 Cable Drill .221 inch Dr 8 4.0

67971 Cable Drill .221 inch Dr 8 4.0

75330 Cable Drill .480 inch Dr 8 4.0

75331 Cable Drill .480 inch Dr 8 4.0

70501 Cable Feeder 18 lbs. 4 10.0

70502 Cable Feeder 22 lbs. 4 10.0

70503 Cable Feeder 26 lbs. 4 10.0

P/N Description Section Page

15522 Cable Feeder 28 lbs. 4 10.0

15531 Cable Feeder 30 lbs. 4 10.0

70504 Cable Feeder 33 lbs. 4 10.0

15523 Cable Feeder 39 lbs. 4 10.0

15530 Cable Feeder 42 lbs. 4 10.0

60584 Cable Feeder Nozzles 4 4 10.0

60590 Cable Feeder Nozzles 4 4 10.0

60591 Cable Feeder Nozzles 4 4 10.0

60592 Cable Feeder Nozzles 4 4 10.0

60593 Cable Feeder Nozzles 4 4 10.0

60596 Cable Feeder Nozzles 4 4 10.0

60597 Cable Feeder Nozzles 4 4 10.0

60599 Cable Feeder Nozzles 5 4 10.0

70006 Cable Feeder Nozzles 5 4 10.0

70007 Cable Feeder Nozzles 5 4 10.0

70008 Cable Feeder Nozzles 5 4 10.0

70009 Cable Feeder Nozzles 5 4 10.0

60598 Cable Feeder Nozzles 6 4 10.0

70001 Cable Feeder Nozzles 6 4 10.0

70002 Cable Feeder Nozzles 6 4 10.0

70003 Cable Feeder Nozzles 6 4 10.0

70004 Cable Feeder Nozzles 6 4 10.0

70005 Cable Feeder Nozzles 6 4 10.0

70564 Cable Feeding Sheaves 3 4 9.0

70581 Cable Feeding Sheaves 3 4 9.0

70565 Cable Feeding Sheaves 4 4 9.0

70566 Cable Feeding Sheaves 4 4 9.0

70582 Cable Feeding Sheaves 4 4 9.0

70583 Cable Feeding Sheaves 4 4 9.0

70567 Cable Feeding Sheaves 5 4 9.0

70584 Cable Feeding Sheaves 5 4 9.0

70585 Cable Feeding Sheaves 6 4 9.0

70586 Cable Feeding Sheaves 6 4 9.0

89016 Cable Fleeter 3 1.0

89521 Cable Guide 3 5.0

89520 Cable Guide 2.5-3.8 3 5.0

89304 Cable Guide Assembly 3 4.0

89306 Cable Guide Assembly 2.5 3 4.0

89307 Cable Guide Assembly 3.0 3 4.0

89503 Cable Guide Assembly 6.0 3 4.0

70298 Cable Pulling Harnesses 4 5.0

70299 Cable Pulling Harnesses 4 5.0

70300 Cable Pulling Harnesses 4 5.0

70312 Cable Pulling Harnesses 4 5.0

70313 Cable Pulling Harnesses 4 5.0

70314 Cable Pulling Harnesses 4 5.0

70626 Cable Pulling Sled 1 8.0

70649 Cable Pulling Sled 1 8.0

89760 Cable Pusher for 1.25 - 4 11.0

72860 Cable Racking Jack 11 lb 4 8.0

72861 Cable Racking Jack 11 lb 4 8.0

Page 11: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com

Product Listing by DescriptionIndex

P/N Description Section Page

66050 Cable Reel Jack (Sold in 6 3.0

08497 Cable Reel Spacer Clamp 6 3.0

89373 Cable Seal Assembly 3 4.0

89374 Cable Seal Assembly 2.5- 3 4.0

89375 Cable Seal Assembly 3.0- 3 4.0

89376 Cable Seal Assembly 3.8- 3 4.0

89377 Cable Seal Assembly 5.0- 3 4.0

89378 Cable Seal Assembly 6.4- 3 4.0

89379 Cable Seal Assembly 8.0- 3 4.0

89125 Cable Seal Plugs 0.23-0. 3 2.0

89126 Cable Seal Plugs 0.29-0. 3 2.0

89127 Cable Seal Plugs 0.35-0. 3 2.0

89128 Cable Seal Plugs 0.41-0. 3 2.0

89129 Cable Seal Plugs 0.47-0. 3 2.0

89130 Cable Seal Plugs 0.55-0. 3 2.0

89131 Cable Seal Plugs 0.63-0. 3 2.0

89132 Cable Seal Plugs 0.71-0. 3 2.0

89133 Cable Seal Plugs 0.79-0. 3 2.0

89134 Cable Seal Plugs 0.87-0. 3 2.0

89135 Cable Seal Plugs 0.95-1. 3 2.0

89136 Cable Seal Plugs 1.02-1. 3 2.0

89162 Cable Seal Plugs 1.10-1. 3 2.0

89164 Cable Seal Plugs 1.18-1. 3 2.0

89085 Cable Seals 0.23-0.29 in 3 2.0

89086 Cable Seals 0.29-0.35 in 3 2.0

89087 Cable Seals 0.35-0.41 in 3 2.0

89088 Cable Seals 0.41-0.47 in 3 2.0

89093 Cable Seals 0.47-0.55 in 3 2.0

89094 Cable Seals 0.55-0.63 in 3 2.0

89095 Cable Seals 0.63-0.71 in 3 2.0

89096 Cable Seals 0.71-0.79 in 3 2.0

89103 Cable Seals 0.79-0.87 in 3 2.0

89104 Cable Seals 0.87-0.95 in 3 2.0

89105 Cable Seals 0.95-1.02 in 3 2.0

89106 Cable Seals 1.02-1.10 in 3 2.0

89110 Cable Seals 1.10-1.18 in 3 2.0

89111 Cable Seals 1.18-1.26 in 3 2.0

70115 Cable Sheath Punch 10 6.0

10923 Cable Sheath Slitter 3 10.0

87291 Cable Sheath-Splitting K 8 3.0

71645 Cable Sheave Shackles 4 6.0

71643 Cable Sheave Shackles 3 4 6.0

71644 Cable Sheave Shackles 4 4 6.0

71723 Cable Sheaves 3 in. 11 4 7.0

71731 Cable Sheaves 3 in. 11 4 7.0

71722 Cable Sheaves 3 in. 20 4 7.0

71734 Cable Sheaves 3 in. 20 4 7.0

71721 Cable Sheaves 3 in. 26-1 4 7.0

71737 Cable Sheaves 3 in. 26-1 4 7.0

71726 Cable Sheaves 4 in. 11 4 7.0

71732 Cable Sheaves 4 in. 11 4 7.0

P/N Description Section Page

71725 Cable Sheaves 4 in. 20 4 7.0

71735 Cable Sheaves 4 in. 20 4 7.0

71724 Cable Sheaves 4 in. 26-1 4 7.0

71738 Cable Sheaves 4 in. 26-1 4 7.0

71729 Cable Sheaves 5 in. 4 7.0

71739 Cable Sheaves 5 in. 4 7.0

71733 Cable Sheaves 5 in. 11 4 7.0

71728 Cable Sheaves 5 in. 20 4 7.0

71736 Cable Sheaves 5 in. 20 4 7.0

71727 Cable Sheaves Cable Shea 4 7.0

01233 Cable Vent 8 5.0

81620 Cable-Sheath Chipping/Sp 8 3.0

66731 Canvas Bucket 12 in. (30 12 4.0

66732 Canvas Bucket 12 in. (30 12 4.0

66739 Canvas Bucket 9 in. (229 12 4.0

06265 Canvas Bushel Bag 12 4.0

70329 Capstan Drive 13 6.0

60681 Carry Strap 12 4.0

06745 Case only 11 1.0

80921 Case, Umbrella 1 lbs. ( 12 1.0

08137 CB Trailer Drawbar 13 4.0

70602 CD Lite Underwind with e 13 2.0

70601 CD Lite Underwind with s 13 2.0

70524 CD3 Winch w/Ball Bearing 13 1.0

75267 CD3 Winch w/Ball Bearing 13 1.0

29165 Chain Lubricant 3 3.0

69494 Chicago Grip Bare Wire 1 2 2.0

87265 Clip-On Cable Block 1 5.0

89535 Collet Assy 3 5.0

89924 Collet Assy 3 7.0

89922 Collet Assy 10 3 7.0

89923 Collet Assy 12 3 7.0

89921 Collet Assy 12.7 3 7.0

89530 Collet Assy 2.5-3.0 3 5.0

89531 Collet Assy 3.0-3.8 3 5.0

89532 Collet Assy 3.8-5.0 3 5.0

89918 Collet Assy 4 3 7.0

89919 Collet Assy 5 3 7.0

89533 Collet Assy 5.0-6.4 3 5.0

89534 Collet Assy 6.4-8.0 3 5.0

89920 Collet Assy 8.5 3 7.0

89107 Collets Guides 3 2.0

89081 Collets Guides 0.24-0.35 3 2.0

89082 Collets Guides 0.24-0.35 3 2.0

89083 Collets Guides 0.35-0.47 3 2.0

89084 Collets Guides 0.35-0.47 3 2.0

89091 Collets Guides 0.47-0.63 3 2.0

89092 Collets Guides 0.63-0.79 3 2.0

89101 Collets Guides 0.79-0.95 3 2.0

89102 Collets Guides 0.95-.1.1 3 2.0

75118 Combination Wrench w/ 4 10 2.0

P/N Description Section Page

75119 Combination Wrench w/ 4 10 2.0

89015 Compressor 4152 lbs. (18 3 1.0

70559 Conduit Couplers 1.660 ( 3 8.0

70560 Conduit Couplers 1.900 ( 3 8.0

70561 Conduit Couplers 2.375 ( 3 8.0

70562 Conduit Couplers 2.375 ( 3 8.0

89808 Conduit Seal-Off 2 in. ( 3 11.0

89809 Conduit Seal-Off 3 in. ( 3 11.0

89810 Conduit Seal-Off 3.5 in. 3 11.0

89811 Conduit Seal-Off 4 in. ( 3 11.0

89812 Conduit Seal-Off 4.5 in. 3 11.0

89813 Conduit Seal-Off 5 in. ( 3 11.0

63541 construction chain 4 8.0

63540 construction chain 1/2 4 8.0

70427 Cordless Slitter 1-2 in. 3 9.0

70546 Cordless Slitter 3 in. D 3 9.0

70547 Cordless Slitter 4 in. D 3 9.0

70548 Cordless Slitter 5 in. D 3 9.0

70657 Cordless Slitter 6 in. D 3 9.0

06838 Cotton Sleeving 1/8 in. 14 2.0

06839 Cotton Sleeving 5/32 in. 14 2.0

66840 Cotton Tape 0.50 in (13) 14 1.0

66841 Cotton Tape 1.0 in (25) 14 1.0

89381 Coupling Swivel 5 7.0

08136 CR Collapsible Power Reel 6 1.0

08140 CR Reel for WG Winch 6 1.0

71440 CR Tape 28 in. (711) W x 14 1.0

71441 CR Tape 36 in. (914) W x 14 1.0

70377 Cross Peen Driving Hamme 10 4.0

75254 Cutter Guy Strand 1/2 in 9 4.0

75244 Cutter Guy Strand 3/8 in 9 4.0

87073 Cutter Strand 16 m 17 lb 9 3.0

87074 Cutter Strand Self-Suppo 9 3.0

79283 D Cabinet Balcony 93 lbs 2 8.0

72680 D Cable Block 3.8 lbs. 1 6.0

74062 D Cable Block Frame Ligh 2 9.0

07163 D Cable Block Lifter 7 1 6.0

70265 D Cable Block Pole Han 1 6.0

70053 D Cable Bond 10 9.0

85330 D Connecter Presser 7 3.0

87052 D Holster Tool Pouch 10 2.0

08764 D Insertion Cutting Tool 10 4.0

07886 D Lashing Wire Clamp 1 4.0

75483 D Pressure Flange 25/pk. 11 7.0

25669 D Ring Adaptors 1 lb./pa 12 2.0

83544 D Tarpaulin 12 5.0

83540 D Tarpaulin (122 x 183) 12 5.0

83541 D Tarpaulin (244 x 244) 12 5.0

83542 D Tarpaulin 10 lbs. (4.5 12 5.0

65031 D Type Tree Guard 2 10.0

65032 D Type Tree Guard 2 10.0

Page 12: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com

Product Listing by DescriptionIndex

P/N Description Section Page

65033 D Type Tree Guard 2 10.0

65034 D Type Tree Guard 2 10.0

65035 D Type Tree Guard 2 10.0

76531 D Warning Flag 6 oz. (17 10 8.0

76532 D Warning Flags Pole Tra 10 8.0

82290 D Workmen's Tent 30 lbs. 12 2.0

82292 D Workmen's Tent Canvas 12 2.0

82291 D Workmen's Tent Frame O 12 2.0

76790 D&E Pressure Hose 10 ft. 8 2.0

76783 D&E Pressure Hose 12.5 f 8 2.0

76784 D&E Pressure Hose 25 ft. 8 2.0

76791 D&E Pressure Hose 30 ft. 8 2.0

76780 D&E Pressure Hose 6 ft. 8 2.0

76781 D&E Pressure Hose 8 ft. 8 2.0

15300 DEC Connect Kit 4 lbs. 9 7 1.0

88238 Detectable Rod 1000 ft. 5 6.0

88268 Detectable Rod 1000 ft. 5 6.0

88240 Detectable Rod 1100 ft. 5 6.0

89270 Detectable Rod 1100 ft. 5 6.0

88242 Detectable Rod 1200 ft. 5 6.0

88272 Detectable Rod 1200 ft. 5 6.0

88222 Detectable Rod 200 ft. 5 6.0

88252 Detectable Rod 200 ft. 5 6.0

88224 Detectable Rod 300 ft. 5 6.0

88254 Detectable Rod 300 ft. 5 6.0

88226 Detectable Rod 400 ft. 5 6.0

88256 Detectable Rod 400 ft. 5 6.0

88228 Detectable Rod 500 ft. 5 6.0

88258 Detectable Rod 500 ft. 5 6.0

88230 Detectable Rod 600 ft. 5 6.0

88260 Detectable Rod 600 ft. 5 6.0

88232 Detectable Rod 700 ft. 5 6.0

88262 Detectable Rod 700 ft. 5 6.0

88234 Detectable Rod 800 ft. 5 6.0

88264 Detectable Rod 800 ft. 5 6.0

88236 Detectable Rod 900 ft. 5 6.0

88266 Detectable Rod 900 ft. 5 6.0

17064 Die for Handset Modular 7 3.0

17065 Die for Modular Presser 7 3.0

17066 Die for Modular Presser 7 3.0

17096 Die for Modular Presser 7 3.0

17097 Die for Modular Presser 7 3.0

17100 Die for Modular Presser 7 3.0

70353 Dielectric Umbrella w/o 12 1.0

70352 Dielectric Umbrella wit 12 1.0

26302 Digging Bars 5 ft. (1.5) 5 2.0

26301 Digging Bars 6 ft. (1.8) 5 2.0

80472 Disc Brake Retro-fit Kit 6 2.0

05431 Disc Brake Shoe 1 oz. 6 2.0

87250 Discharge Hose Female/Ma 5 3.0

87251 Discharge Hose Female/Op 5 3.0

P/N Description Section Page

07166 Double Coax Cable Bende 2 7.0

71661 Double Coax Cable Bender 2 7.0

70670 Double Weave Flexible Pu 2 13.0

70672 Double Weave Flexible Pu 2 13.0

70671 Double Weave Flexible Pul 2 13.0

10901 Double-Sided Replacement 9 4.0

68631 DR Tape 0.045 in. (1.14) 14 1.0

68632 DR Tape 0.045 in. (1.14) 14 1.0

25792 Drag Brake Repair Kit 6 2.0

89948 Drill Stand 3 7.0

83663 Drive spindle and brake 6 1.0

83667 Drive spindle and brake 6 1.0

07380 Drop Wire Clamp 2 10.0

06530 Drop Wire Hook 100/Box 8 2 10.0

06970 Drop Wire Hook Strap 2 10.0

70624 Drum Overhead Line Winc 13 4.0

89071 Duct Clamps 3 2.0

89033 Duct Clamps 0.75 in. (19 3 2.0

89021 Duct Clamps 1 in. (25) 3 2.0

89041 Duct Clamps 1.25 in. (32 3 2.0

89061 Duct Clamps 1.50 in. (38 3 2.0

70505 Duct Projectile for 1 in 3 11.0

70506 Duct Projectile for 1.25 3 11.0

70508 Duct Projectile for 1.38 3 11.0

70511 Duct Projectile for 1.88 3 11.0

70513 Duct Projectile for 2 in 3 11.0

70514 Duct Projectile for 2.5 3 11.0

70515 Duct Projectile for 3 in 3 11.0

70516 Duct Projectile for 4 in 3 11.0

70517 Duct Projectile for 5 in 3 11.0

70518 Duct Projectile for 6 in 3 11.0

70510 Duct Projectilefor 1.5 i 3 11.0

70092 Duct Rod Kit 1/4 in. x 6 5 7.0

01013 Duct Rod Pick Up Tool 5 8.0

89202 Duct Rodder 100 ft. (30) 5 5.0

89238 Duct Rodder 1000 ft. (30 5 5.0

89268 Duct Rodder 1000 ft. (30 5 5.0

89240 Duct Rodder 1100 ft. (33 5 5.0

89270 Duct Rodder 1100 ft. (33 5 5.0

89242 Duct Rodder 1200 ft. (36 5 5.0

89272 Duct Rodder 1200 ft. (36 5 5.0

89243 Duct Rodder 1300 ft. (39 5 5.0

89244 Duct Rodder 1400 ft. (42 5 5.0

89245 Duct Rodder 1500 ft. (45 5 5.0

89246 Duct Rodder 1600 ft. (48 5 5.0

89247 Duct Rodder 1700 ft. (51 5 5.0

89248 Duct Rodder 1800 ft. (54 5 5.0

89204 Duct Rodder 200 ft. (61) 5 5.0

89222 Duct Rodder 200 ft. (61) 5 5.0

89252 Duct Rodder 200 ft. (61) 5 5.0

89249 Duct Rodder 2000 ft. (61 5 5.0

P/N Description Section Page

89365 Duct Rodder 3/8""X 100' 5 8.0

89206 Duct Rodder 300 ft. (91) 5 5.0

89224 Duct Rodder 300 ft. (91) 5 5.0

89254 Duct Rodder 300 ft. (91) 5 5.0

89208 Duct Rodder 400 ft. (122 5 5.0

89226 Duct Rodder 400 ft. (122 5 5.0

89256 Duct Rodder 400 ft. (122 5 5.0

89210 Duct Rodder 500 ft. (152 5 5.0

89228 Duct Rodder 500 ft. (152 5 5.0

89258 Duct Rodder 500 ft. (152 5 5.0

89230 Duct Rodder 600 ft. (183 5 5.0

89260 Duct Rodder 600 ft. (183 5 5.0

89232 Duct Rodder 700 ft. (213 5 5.0

89262 Duct Rodder 700 ft. (213 5 5.0

89234 Duct Rodder 800 ft. (244 5 5.0

89264 Duct Rodder 800 ft. (244 5 5.0

89236 Duct Rodder 900 ft. (274 5 5.0

89266 Duct Rodder 900 ft. (274 5 5.0

89804 Duct Seal-off 1 in. (25) 3 10.0

89805 Duct Seal-off 1.25 in. ( 3 10.0

89806 Duct Seal-off 1.5 in. (3 3 10.0

89807 Duct Seal-off 2 in. (51) 3 10.0

89072 Duct Seals 3 2.0

89034 Duct Seals 0.75 in. (19) 3 2.0

89022 Duct Seals 1 in. (25) 3 2.0

89042 Duct Seals 1.25 in. (32) 3 2.0

89062 Duct Seals 1.50 in. (38) 3 2.0

89383 Duct To Duct Clamp 8.5 l 5 9.0

74063 E Cable Block Frame Heav 2 9.0

74055 E Cable Block w/ Halo 10 2 9.0

79600 E Cable Leader 48 lbs (2 2 8.0

86351 E Ladder Support w/23.5” 2 7.0

86352 E Ladder Support w/28.5” 2 7.0

86350 E Ladder Support w/33.5” 2 7.0

81460 E Lashing Wire Clamp 1 4.0

81461 E Lashing Wire Clamp 1 4.0

82870 E Pressure Testing Liqui 11 8.0

82871 E Pressure Testing Liqui 11 8.0

82872 E Pressure Testing Liqui 11 8.0

82873 E Pressure Testing Liqui 11 8.0

82875 E Pressure Testing Liqui 11 8.0

10700 Econo Block 1 5.0

10701 Econo Block 1 5.0

89600 Electric Capstan Hoist 2 8.0

89610 Electric Capstan Hoist C 2 8.0

89621 Electric Capstan Hoist R 13 5.0

89620 Electric Capstan Hoist S 13 5.0

89622 Electric Capstan Hoist U 13 5.0

71574 Electric CEV Hoist w/ St 5 12.0

87129 Electrician's Knife 10 1.0

87111 Ergonomic Scissors 3 oz. 9 2.0

Page 13: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com

Product Listing by DescriptionIndex

P/N Description Section Page

70409 Expanding Jaw Pulling Ey 4 4.0

70410 Expanding Jaw Pulling Ey 4 4.0

70411 Expanding Jaw Pulling Ey 4 4.0

70412 Expanding Jaw Pulling Ey 4 4.0

70413 Expanding Jaw Pulling Ey 4 4.0

70414 Expanding Jaw Pulling Ey 4 4.0

70415 Expanding Jaw Pulling Ey 4 4.0

70212 Extension Bolts 2 10.0

74108 Extension Bolts 2 10.0

74109 Extension Bolts 2 10.0

60581 Extension Cable Feeder 4 10.0

60582 Extension Cable Feeder 4 10.0

60586 Extension Cable Feeder 4 10.0

60600 Extension Cable Feeder 4 10.0

03504 Extension For Innerduct 4 8.0

32937 Extension For Innerduct 5 9.0

29139 Extra Step Kit 2 8.0

08093 F Cable Block 3.8 lbs. 1 7.0

74064 F Cable Block Frame All 2 9.0

08099 F Cable Block Lifter 0 1 7.0

70193 F Cable Block w/Keeper 1 7.0

08669 F Pressure Flange 11 6.0

08245 F Slack Puller 2 5.0

69146 F Valve Stem Cap Package 11 7.0

69147 F Valve Stem Cap Package 11 7.0

88414 Female End Fitting Kit 5 6.0

88416 Female End Fitting Kit 5 6.0

70119 Female/male adaptor 11 2.0

89003 Fiber Cable Blower w/o P 3 1.0

89000 Fiber Cable Blower w/PP 3 1.0

89001 Fiber Cable Blower w/PP 3 1.0

70022 Fiber Optic Cable Bloc 1 7.0

87229 Fiber Optic Kevlar Cutte 9 2.0

87230 Fiber Optic Stripper 10 7.0

82720 Figure 8 Jacket Slitter 9 5.0

89074 Fire Retardant Splice Wr 14 1.0

89412 Fitting Repair Kit Femal 5 5.0

89414 Fitting Repair Kit Femal 5 5.0

89416 Fitting Repair Kit Femal 5 5.0

89411 Fitting Repair Kit Male 5 5.0

89413 Fitting Repair Kit Male 5 5.0

89415 Fitting Repair Kit Male 5 5.0

76532 Flag Drilled Replacement 13 6.0

62450 Flat & Formed Wiping Clo 8 5.0

62451 Flat & Formed Wiping Clo 8 5.0

62452 Flat & Formed Wiping Clo 8 5.0

62453 Flat & Formed Wiping Clo 8 5.0

62454 Flat & Formed Wiping Clo 8 5.0

62455 Flat & Formed Wiping Clo 8 5.0

62456 Flat & Formed Wiping Clo 8 5.0

62457 Flat & Formed Wiping Clo 8 5.0

P/N Description Section Page

62458 Flat & Formed Wiping Clo 8 5.0

62460 Flat & Formed Wiping Clo 8 5.0

62461 Flat & Formed Wiping Clo 8 5.0

62462 Flat & Formed Wiping Clo 8 5.0

62463 Flat & Formed Wiping Clo 8 5.0

62464 Flat & Formed Wiping Clo 8 5.0

62465 Flat & Formed Wiping Clo 8 5.0

70660 Flexible Cable Pulling G 4 5.0

70661 Flexible Cable Pulling G 4 5.0

70662 Flexible Cable Pulling G 4 5.0

70663 Flexible Cable Pulling G 4 5.0

70664 Flexible Cable Pulling G 4 5.0

70673 Flexible Cable Pulling G 4 5.0

70674 Flexible Cable Pulling G 4 5.0

70675 Flexible Cable Pulling G 4 5.0

70676 Flexible Cable Pulling G 4 5.0

70677 Flexible Cable Pulling G 4 5.0

70680 Flexible Cable Pulling G 4 5.0

70681 Flexible Cable Pulling G 4 5.0

70682 Flexible Cable Pulling G 4 5.0

70683 Flexible Cable Pulling G 4 5.0

70684 Flexible Cable Pulling G 4 5.0

89371 Flexible Leader 1/4 in. 5 5.0

89370 Flexible Leader 3/8 in.( 5 5.0

10105 Flexible Mandrel 5 10.0

10102 Flexible Mandrel 2 in. 5 10.0

10106 Flexible Mandrel 2.5 in. 5 10.0

10103 Flexible Mandrel 3 in. 5 10.0

10107 Flexible Mandrel 3.5 in. 5 10.0

10104 Flexible Mandrel 4 in. 5 10.0

15470 FO Pulling Capstans 25 4 2.0

15472 FO Pulling Capstans 25 4 2.0

15479 FO Pulling Capstans 25 4 2.0

70338 FO Pulling Capstans 25 4 2.0

70391 FO Pulling Capstans 25 4 2.0

70381 FO Pulling Capstans 32 4 2.0

70471 FO Pulling Capstans 32 4 2.0

70472 FO Pulling Capstans 32 4 2.0

70351 FO Pulling Capstans 32 ( 4 2.0

70473 FO Pulling Capstans 40 4 2.0

70475 FO Pulling Capstans 40 4 2.0

70478 FO Pulling Capstans 40 4 2.0

70533 Foam Line Carriers 0.5 3 12.0

70534 Foam Line Carriers 0.75 3 12.0

70535 Foam Line Carriers 1 in. 3 12.0

70536 Foam Line Carriers 1.25 3 12.0

70537 Foam Line Carriers 1.5 3 12.0

70538 Foam Line Carriers 2 in. 3 12.0

70539 Foam Line Carriers 2.5 3 12.0

70540 Foam Line Carriers 3 in. 3 12.0

70541 Foam Line Carriers 3.5 3 12.0

P/N Description Section Page

70542 Foam Line Carriers 4 in. 3 12.0

70543 Foam Line Carriers 5 in. 3 12.0

70544 Foam Line Carriers 6 in. 3 12.0

34519 Foot Control Valve 10 lb 4 11.0

31117 Foot Control Valve 54 lb 4 1.0

70117 Furnace Windshield 1 lbs 8 1.0

17061 G Bonding Vise Connector 10 10.0

01051 G Cable Block 1 7.0

10501 G Lasher Storage Case 1 2.0

70132 Gas Engine Ventilation B 5 3.0

70160 Grate Lifter 5 2.0

87154 Ground Tent 4' X 4' 15 l 12 2.0

87156 Ground Tent 6' X 6' 18.5 12 2.0

87158 Ground Tent 8' X 8' 12 2.0

77966 Ground Vise Connector 10 10.0

70011 Guard Halo for J2 Lash 1 1.0

70012 Guard Halo for J2 Lash 1 1.0

07152 Guard Only 8 2.0

87281 Guy Rule 2 2.0

87287 Guy Wire Dispenser 2 3.0

01279 Guy Wire Holder 2 3.0

82313 H Aerial Tent Complete w 12 3.0

82311 H Aerial Tent Frame Only 12 3.0

08608 H Cable Block 1 7.0

70184 Handline 5/8" X 30' W/ 5 3.0

68597 handlines 4 8.0

68596 handlines 1/2 in. X 60 4 8.0

68595 handlines 3/8 in. x 100 4 8.0

68593 handlines 3/8 in. x 50 4 8.0

68592 handlines 5/8 in. x 20 4 8.0

75255 Hard Cable Ratchet Cutte 9 3.0

68493 Haven’s Grip 2 2.0

87131 Hawkbill Blade Knife 10 2.0

87143 Heavy Duty Blower Hose 9 5 4.0

89766 Heavy Duty Cable Roller 4 11.0

80975 Heavy Duty Manhole Sheav 4 8.0

70093 Heavy Duty Rod 1 lb. 8 5 7.0

70094 Heavy Duty Rod 2 lb. 8 5 7.0

71140 Heavy Duty Rope Connecto 4 6.0

71141 Heavy Duty Rope Connecto 4 6.0

71142 Heavy Duty Rope Connecto 4 6.0

71143 Heavy Duty Rope Connecto 4 6.0

10152 Heavy Duty Stiff Spine 5 10.0

10153 Heavy Duty Stiff Spine 5 10.0

10154 Heavy Duty Stiff Spine 5 10.0

10155 Heavy Duty Stiff Spine 5 10.0

10156 Heavy Duty Stiff Spine 5 10.0

10157 Heavy Duty Stiff Spine 5 10.0

10158 Heavy Duty Stiff Spine 5 10.0

73017 Hex Socket Wrench 10 2.0

70430 Hinged Cable Block 1 8.0

Page 14: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com

Product Listing by DescriptionIndex

P/N Description Section Page

30140 Hitch Weldment for J2 1 9.0

28210 Holder Bucket for Umbrel 12 1.0

70629 Hook Safety Latch for 70 2 4.0

89764 Hoop Roller in Aluminum 4 11.0

30901 Hydraulic hoses (2) 4 1.0

31115 Hydraulic Motor Assembly 4 1.0

32800 Hydraulic Power Pack 3 1.0

70480 Hydraulic Puller with S 4 1.0

70479 Hydraulic Puller with St 4 1.0

70613 Hydraulic Winch Cable Po 13 3.0

70483 Hydraulically Limited Ca 4 1.0

70484 Hydraulically Limited Ca 4 1.0

70486 Hydraulically Limited Ca 4 1.0

70491 Inflatable Line Carriers 3 12.0

70498 Inflatable Line Carriers 3 12.0

70499 Inflatable Line Carriers 3 12.0

70500 Inflatable Line Carriers 3 12.0

89387 Inner Duct Attachment To 5 9.0

32221 Innerduct Clamp For GMP 5 9.0

10912 Innerduct Cutter for 2 l 3 10.0

70690 Innerduct Cutter up to 0 3 10.0

70509 Innerduct Projectile for 3 11.0

70512 Innerduct Projectile for 3 11.0

60510 Innerduct Pulling Eyes 1 4 3.0

60512 Innerduct Pulling Eyes 1 4 3.0

60515 Innerduct Pulling Eyes 1 4 3.0

61510 Innerduct Pulling Eyes 1 4 3.0

61512 Innerduct Pulling Eyes 1 4 3.0

61515 Innerduct Pulling Eyes 1 4 3.0

60520 Innerduct Pulling Eyes 2 4 3.0

61520 Innerduct Pulling Eyes 2 4 3.0

71679 Innerduct Reel Buck 6 3.0

69149 Inside Valve Core Only 11 7.0

70530 Intermittent Duty Winch 13 1.0

08189 J2 Lasher Storage Case 1 1.0

70646 Jamb Skid 4 9.0

70640 Jamb Skid 48 - 85 in. (1 4 9.0

70643 Jamb Skid 84 - 121 in. ( 4 9.0

89066 Junction Box 1.25 in. Du 3 3.0

89067 Junction Box 1.50 in. Du 3 3.0

89008 Junction Box Multiple* 9 3 3.0

25125 Keyed Left Modular Plugs 7 2.0

25126 Keyed Right Modular Plug 7 2.0

17089 Kit Grip Mod Plug Presse 7 1.0

71649 Kit Tripod w/Bag 12 1.0

15475 Knife and Scissors Sharp 10 1.0

68492 L Strand Puller 3/16” – 2 2.0

65036 L Type Tree Guard 2 10.0

65037 L Type Tree Guard 2 10.0

65038 L Type Tree Guard 2 10.0

75985 Large Pole Mount Spindle 6 4.0

P/N Description Section Page

70400 Lasher Apollo 38 lbs. 1 2.0

70495 Lasher Breakaway Pulli 1 2.0

71422 Lasher Cable C2 .045” 1 1.0

71424 Lasher Cable C2 .045” 1 1.0

10502 Lasher Cable G 0.045” 1 2.0

10500 Lasher Cable G 0.065” 1 2.0

86070 Lasher Cable J2 .045” 1 1.0

86072 Lasher Cable J2 .045” 1 1.0

86074 Lasher Cable J2 .045” 1 1.0

86071 Lasher Cable J2 .065” 1 1.0

71500 Lasher Sierra w/case W 1 2.0

70190 Lasher Tow Rope 1 3.0

71518 Lashing Wire for ZB La 1 3.0

08605 Lashing Wire Grip 1 4.0

70355 Lashing Wire Shears 1 10.0

01384 Lashing Wire Vise 1 4.0

01009 Lead Rasp 8 2.0

06748 Lead Sleave Spreader 8 4.0

01148 Lead Sleeve Opener/Close 8 4.0

87010 Leather Bolt Bag 12 5.0

75251 Leather Scabbard Only 9 3.0

66880 Lettering Dies (Set of t 8 3.0

70627 Lightweight Capstan Winc 13 4.0

70088 Lineman’s Hammer 2 6.0

70100 Lineman’s Wrench 2 6.0

10122 Long Duct Swabs 5 11.0

10116 Long Duct Swabs 2 in. 5 11.0

10118 Long Duct Swabs 3 1/2 in 5 11.0

10117 Long Duct Swabs 3 in. 5 11.0

10119 Long Duct Swabs 4 in. 5 11.0

10120 Long Duct Swabs 5 in. 5 11.0

10121 Long Duct Swabs 6 in. 5 11.0

10900 Longitudinal Duct Slitte 3 9.0

80924 Lower Pole Assembly with 12 1.0

69140 M Valve Stem Cap Package 11 7.0

60580 Main Cable Feeder 4 10.0

60583 Main Cable Feeder (102) 4 10.0

60585 Main Cable Feeder (127) 4 10.0

60587 Main Cable Feeder (152) 4 10.0

88415 Male End Fitting Kit 1/ 5 6.0

88413 Male End Fitting Kit 3/ 5 6.0

01375 Manhole Cover Bolt Socke 5 1.0

84540 Manhole Cover Bolt Wrenc 5 1.0

84531 Manhole Cover Bolts 1-7/ 5 1.0

84530 Manhole Cover Bolts 3-1/ 5 1.0

08172 Manhole Cover Hook 5 1.0

70158 Manhole Cover Lifter 5 2.0

70159 Manhole Cover Lifter 11 5 2.0

01368 Manhole Cover Lifter 9 l 5 1.0

13681 Manhole Cover Lifter w/S 5 1.0

06867 Manhole Guard Rail 40 lb 5 3.0

P/N Description Section Page

70283 Manhole Sheave 32 lbs. 4 8.0

70284 Manhole Sheave 55 lbs. 4 8.0

70285 Manhole Sheave 65 lbs. 4 8.0

20551 Manual Wire Unwrapping 10 6.0

22681 Manual Wire Wrap Tool 10 6.0

30410 Mapp Air Tip #4 0.5 lbs. 8 1.0

15301 MAPP Gas Torch Kit 5 lbs 8 1.0

87187 Measuring Tape 10 8.0

87164 Measuring Wheel 12.5 in. 10 8.0

89692 Metal Drive Wheel Kit 3 6.0

87166 Metric Measuring Wheel 10 8.0

89565 Micro Duct Cutter .75 in 3 8.0

89002 Microfiber Cable Fleeter 3 6.0

89013 Microtube Blower w/ PP 3 1.0

01315 Mini Cable Block 1 5.0

70527 Missile for 2 in. (51) 3 11.0

70528 Missile for 3 in. (76) 3 11.0

70529 Missile for 4 in. (102) 3 11.0

70531 Missile for 5 in. (127) 3 11.0

70532 Missile for 6 in. (152) 3 11.0

79601 Modified E Cable Leader 2 8.0

01408 Modular Crimper RJ45 2 l 7 1.0

70633 Modular DEC Connect Pres 7 1.0

01550 Modular Kit RJ11 7 1.0

17090 Modular Plug 7 2.0

17188 Modular Plug 7 2.0

17078 Modular Plug 2 x 6 100/P 7 2.0

17046 Modular Plug 2 x 6 50/Pk 7 2.0

17074 Modular Plug 4 x 4 100/P 7 2.0

17075 Modular Plug 4 x 6 100/P 7 2.0

17076 Modular Plug 6 x 6 100/P 7 2.0

17043 Modular Plug 8 x 8 100/P 7 2.0

17077 Modular Plug 8 x 8 Non-k 7 2.0

17079 Modular Plug 8 x 8 Non-k 7 2.0

15324 Modular Plug Presser Box 7 1.0

70630 Modular Plug Presser w/ 7 1.0

70631 Modular Plug Presser w/ 7 1.0

70632 Modular Plug Presser w/ 7 1.0

70635 Modular Plug Presser w/ 7 1.0

75981 Mounting Bracket 5 lbs. 6 2.0

89947 Mounting Plate 3 8.0

70210 Mud Bucket 5 3.0

71543 Multi-Angle Self-Adjus 1 9.0

67272 Muslin Roll 2 in. (51) w 14 2.0

67274 Muslin Roll 4 in. (102) 14 2.0

67276 Muslin Roll 6 in. (153) 14 2.0

64910 Needle Point Test Pick 4 10 6.0

64911 Needle Point Test Point 10 6.0

25127 Non-keyed Modular Plugs 7 2.0

70380 Non-Metallic Reflective 10 8.0

66881 Numbering Die 8 oz. (0.2 8 3.0

Page 15: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com

Product Listing by DescriptionIndex

P/N Description Section Page

70521 Nylon Spudger 10 7.0

71554 OH FO Shackle Only 2 7.0

71549 OH FO Shackle w/24” (61c 2 7.0

87300 Opti-Tray Kit 10 6.0

89820 Optional Carry Case 3 11.0

06320 Orange Stick 10 7.0

12161 Oval Canvas Bucket 12 4.0

68590 Overhead Handline 2 5.0

08007 Overlash Aerial Cable 1 9.0

69148 P Valve Stem Cap Package 11 7.0

70107 Paint Brush Flat 4"" (1 10 7.0

89830 Parachute for 1 in. (25) 3 8.0

89831 Parachute for 1.25 in. ( 3 8.0

89832 Parachute for 1.5 in. (3 3 8.0

89833 Parachute for 2 in. (51) 3 8.0

06679 Paraffin Dipper 8 2.0

70619 Payout Stand 30 lbs (13. 2 12.0

19192 Paystation Wrench 10 3.0

87146 Pelsue Airpac 5 4.0

87145 Pelsue Electric Ventilat 5 4.0

24215 Pipe GroundClamp 10 10.0

17084 Plastic Duct Seal Compou 14 2.0

17085 Plastic Duct Seal Compou 14 2.0

24008 Plastic Duct Seal Compou 14 2.0

70103 Plastic Spudger 10 7.0

06181 Plastic Tree Block 2 10.0

70335 Pole Mount Block 1 7.0

70348 Pole Mount Block 1 7.0

70440 Pole Mount Bracket Ada 1 8.0

70372 Pole Mount Bracket for 1 8.0

75987 Pole Mount C Drop Wire R 6 2.0

83664 Pole spindle and brake 6 1.0

83668 Pole spindle and brake 6 1.0

70274 Pole Trailer Chain Binde 13 6.0

70276 Pole Trailer Chain Binde 13 6.0

70277 Pole Trailer Chain Binde 13 6.0

70278 Pole Trailer Chain Binde 13 6.0

70279 Pole Trailer Chain Binde 13 6.0

70280 Pole Trailer Chain Binde 13 6.0

70367 Pole Trailer Chain Binde 13 6.0

70368 Pole Trailer Chain Binde 13 6.0

71566 Pole Trailer Strap Binde 13 6.0

71567 Pole Trailer Strap Binde 13 6.0

71568 Pole Trailer Strap Binde 13 6.0

71569 Pole Trailer Strap Binde 13 6.0

71570 Pole Trailer Strap Binde 13 6.0

46113 Poly Cable Dresser 2 lbs 8 3.0

70020 Polyethylene Manhole Shi 5 2.0

70021 Polyethylene Manhole Shi 5 2.0

72090 Polyethylene Tape 3 in. 14 1.0

72091 Polyethylene Tape 3 in. 14 1.0

P/N Description Section Page

89199 Polywater Duct Prelube 3 3.0

89568 Polywater Duct Prelube 3 6.0

89141 Polywater Duct Prelube 2 3 3.0

81390 Portable Pole Binder w/ 13 4.0

81392 Portable Pole Binder w/ 13 4.0

81393 Portable Pole Binder w/ 13 4.0

07170 Pot Hook Handle 8 1.0

24470 Pouch Only 10 1.0

89004 Powered Duct Rod Pusher 5 9.0

89005 Powered Duct Rod Pusher 5 9.0

89006 Powered Duct Rod Pusher 5 9.0

70118 Pressure Regulator with 8 1.0

06565 Pressure Testing Clamp 11 4.0

06515 Pressure Testing Valve B 11 7.0

01190 Protractor Pull Finder 2 3.0

07668 Pry Bar 10 5.0

71710 Pulling Frames 3 in. x 1 4 9.0

71713 Pulling Frames 3 in. x 1 4 9.0

71711 Pulling Frames 4 in. x 1 4 9.0

71714 Pulling Frames 4 in. x 1 4 9.0

71712 Pulling Frames 5 in. x 1 4 9.0

71715 Pulling Frames 5 in. x 1 4 9.0

01815 Pwr Cable Ratchet Cutter 9 2.0

01818 Pwr Cable Ratchet Cutter 9 2.0

15316 Quadrant Block 18 lbs. 4 3.0

84453 Quadrant Blocks 3 in. (7 4 7.0

84454 Quadrant Blocks 4 in. (1 4 7.0

84455 Quadrant Blocks 5 in. 4 7.0

69143 R Valve Stem Cap Packag 11 7.0

69142 R Valve Stem Cap Package 11 7.0

88900 Ramrod 5 8.0

75250 Ratcheting Cable Cutter 9 3.0

88280 Receiver Locating 4 lbs. 5 7.0

83665 Reel brake assembly only 6 1.0

71669 Reel Buck w/42"" Spindl 6 3.0

71678 Reel Buck w/60"" Spindl 6 3.0

70404 Reel Caddy 10 lbs. (4.54 6 3.0

70403 Reel Caddy External Mult 6 3.0

70407 Reel Caddy XL 6 3.0

66051 Reel Jack Spindle 6 3.0

74531 Reel Jack Spindle 6 3.0

70220 Reel Lifter 3000 lbs. 6 6 4.0

70240 Reel Lifter 4500 lbs. 6 4.0

82214 Regulator Hard Hat 11 2.0

70213 Reinforcing Straps 2 10.0

74110 Reinforcing Straps 2 10.0

74111 Reinforcing Straps 2 10.0

74511 Replacement Bit 8 4.0

02109 Replacement Blade 9 5.0

70534 Replacement blade 3 8.0

70691 Replacement Blade 3 10.0

P/N Description Section Page

82721 Replacement Blade 9 5.0

70426 Replacement Blade 0.1 lb 3 9.0

82731 Replacement Blades 25/pk 2 5.0

28249 Replacement Cable Bloc 1 9.0

30292 Replacement Cable Guid 1 8.0

82550 Replacement Clip for B C 10 5.0

82551 Replacement Clip for C C 10 5.0

70089 Replacement Handle Only 10 4.0

70223 Replacement Head Only 10 4.0

15237 Replacement Mount Assemb 12 3.0

15401 Replacement Needle Clust 10 5.0

82554 Replacement Needle Clust 10 5.0

71716 Replacement Pin 4 9.0

71717 Replacement Pin 4 9.0

70039 Replacement Sealing Tube 5 2.0

70049 Replacement Sealing Tube 5 2.0

25179 Replacement Slitting Wir 8 4.0

10911 Replacement Wheel 3 10.0

06931 Rod Grapple 2 lbs. (0.9) 5 8.0

89386 Rod Grapple Adaptor 5 8.0

89360 Roller Guide 3/8 in. (9) 5 5.0

29446 Rope Adapter 1/4 in. (6) 3 10.0

29448 Rope Adapter 3/16 in. (5 3 10.0

29447 Rope Adapter 3/8 in. (10 3 10.0

70594 Rope Connector 2 13.0

70593 Rope Connector 0.3 lbs. 2 13.0

89621 Rope Lock Device 2 lbs ( 2 8.0

88801 Rope Roller Guide 4.7 lb 4 8.0

29642 Rope Storage Reel Empty 2 12.0

70624 Rope Storage Reel w/Rope 2 12.0

71130 Rope to Rope 2.7 lbs. 4 6.0

71132 Rope to Swivel 4 6.0

71131 Rope to Swivel 2.1 lbs. 4 6.0

01820 Round Cable Slitter for 9 5.0

01825 Round Cable Slitter for 9 5.0

83669 RS Power Reel 6 1.0

83660 RS Power Reel 6"" (Comp 6 1.0

06843 Rubber Splice Bandage 14 2.0

87278 Safety Cones 10 8.0

89935 Seal Assy 3 7.0

89930 Seal Assy 2.0 - 2.5 3 7.0

89931 Seal Assy 2.5 - 3.0 3 7.0

89932 Seal Assy 3.0 - 3.8 3 7.0

89933 Seal Assy 3.8 - 5.0 3 7.0

89934 Seal Assy 5.0 - 6.4 3 7.0

89801 Seal-off Valve Control 3 10.0

77401 Sealing Clamps for cable 11 7.0

77402 Sealing Clamps for cable 11 7.0

77404 Sealing Clamps for cable 11 7.0

77405 Sealing Clamps for cable 11 7.0

70485 Security Hex Adaptor 10 2.0

Page 16: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com

Product Listing by DescriptionIndex

P/N Description Section Page

70347 Self Storing HD Hose 5 4.0

81921 Self-Locking Aerial Hand 2 5.0

70200 Self-Support Cable Block 2 9.0

31116 Self-Support Frame 93 lb 4 1.0

01297 Service Stop Plug Wrench 10 3.0

70045 Shackle 4 3.0

71548 Shackle 30 lbs. (17) 4 3.0

09339 Shackle Fitting 3/8 in. 5 5.0

07151 Shave Hook with Guard 8 2.0

71560 Sheave & Shackle Assembl 4 3.0

71561 Sheave & Shackle Assembl 4 3.0

71562 Sheave & Shackle Assembl 4 3.0

70376 Sheave Pole Mount Asse 1 8.0

10130 Short Duct Swabs 5 11.0

10124 Short Duct Swabs 2 1/2 5 11.0

10123 Short Duct Swabs 2 in. 5 11.0

10126 Short Duct Swabs 3 1/2 5 11.0

10125 Short Duct Swabs 3 in. 5 11.0

10127 Short Duct Swabs 4 in. 5 11.0

10128 Short Duct Swabs 5 in. 5 11.0

10129 Short Duct Swabs 6 in. 5 11.0

11405 Short Striking Hammer 10 4.0

70605 Sidewinder Fiber Optic P 4 1.0

�29888 �Sierra Lasher Storage Case 1 2.0

67261 Sign Bracket 2 11.0

67262 Sign Bracket 2 11.0

67263 Sign Bracket 2 11.0

67264 Sign Bracket 2 11.0

67266 Sign Bracket 2 11.0

67267 Sign Bracket 2 11.0

60680 Signature Bag 5 lbs. (2) 12 4.0

24471 Skinning Knife 10 1.0

20827 Sleeve Unwrapping Tool 10 6.0

75984 Small Pole Mount Spindle 6 4.0

07272 Soap Brush only 11 4.0

07271 Soap Bucket and Brush 11 4.0

07270 Soap Bucket only 10 oz. 11 4.0

65010 Soap Solution Regular Gr 11 8.0

65011 Soap Solution Winter Gra 11 8.0

06085 Solder Ladle 8 2.0

61566 Solder Melting Pot 6 in. 8 1.0

61568 Solder Melting Pot 8 in. 8 1.0

67223 Soldering Iron 8 2.0

67221 Soldering Iron 2 1 lb (0 8 2.0

67220 Soldering Iron 3 1-1/2 l 8 2.0

67222 Soldering Iron 4 2 lb (0 8 2.0

89394 Sonde Adapter Female 5 7.0

89384 Sonde Adapter Male 1/4 X 5 7.0

89396 Sonde Missile 1 in. Duc 3 12.0

88287 Sonde Missile 1-1/2 in. 3 12.0

88285 Sonde Missile 1-1/4 in. 3 12.0

P/N Description Section Page

88286 Sonde Missile 1-1/4 in. 3 12.0

88288 Sonde Missile 2 in. Duc 3 12.0

88283 Sonde Super Small M10 En 3 12.0

89558 Spare O Ring 3 7.0

89551 Spare O Ring 10 3 7.0

89552 Spare O Ring 12 - 12.7 3 7.0

89556 Spare O Ring 4 3 7.0

89549 Spare O Ring 5 3 7.0

89550 Spare O Ring 8 - 8.5 3 7.0

89514 Spare Seal 3 7.0

89509 Spare Seal 2.0 - 2.5 3 7.0

89510 Spare Seal 2.5 - 3.0 3 7.0

89511 Spare Seal 3.0 - 3.8 3 7.0

89512 Spare Seal 3.8 - 5.0 3 7.0

89513 Spare Seal 5.0 - 6.4 3 7.0

06409 Spiked Shoes 13 7.0

88419 Splice Kit 1/2” Toneable 5 6.0

88418 Splice Kit 3/8"" Toneab 5 6.0

89419 Splice Repair Kit 1/2 in 5 5.0

89417 Splice Repair Kit 1/4 in 5 5.0

89418 Splice Repair Kit 3/8 in 5 5.0

25523 Splicer's Combination Te 12 2.0

70034 Splicer's Combination Te 12 2.0

70229 Splicer's Combination Te 12 2.0

82291 Splicer's Combination Te 12 2.0

76041 Splicer's Ladder and C L 12 2.0

74230 Splicer's Mirror 8 4.0

74231 Splicer's Mirror BELL SP 8 4.0

70019 Splicer's Scissors Pouch 9 2.0

07186 Splicer's Seat 10 4.0

15471 Splicer’s Kit 7 oz. (198 10 1.0

70204 Splicer’s Ladder Tent 2 8.0

70214 Splicer’s Ladder Tent 2 8.0

70077 Splicer’s Ladder Tent Co 2 8.0

70692 Split Aluminum Duct Coup 3 8.0

70693 Split Aluminum Duct Coup 3 8.0

70694 Split Aluminum Duct Coup 3 8.0

70695 Split Aluminum Duct Coup 3 8.0

88831 Split Ext Cable Feeder 4 10.0

88830 Split Main Cable Feeder 4 10.0

15314 Split Sheave 48 lbs. 4 3.0

83666 Spool only 12"" 72 lbs. 6 1.0

83662 Spool only 6"" 50 lbs. 6 1.0

71530 Stainless Steel Lashing Wire 1 3.0

71531 Stainless Steel Lashing Wire 1 3.0

71532 Stainless Steel Lashing Wire 1 3.0

71533 Stainless Steel Lashing Wire 1 3.0

71534 Stainless Steel Lashing Wire 1 3.0

71535 Stainless Steel Lashing Wire 1 3.0

71540 Stainless Steel Lashing Wire 1 3.0

71541 Stainless Steel Lashing Wire 1 3.0

P/N Description Section Page

71542 Stainless Steel Lashing Wire 1 3.0

15305 Standard Kit 4 lbs. (1.8 7 1.0

01008 Standard Scissors 3 oz. 9 2.0

70487 Stanley Hydraulic Power 4 1.0

70250 Star Shaped Floor Socket 4 1.0

04320 Stearine Candles 8 5.0

06765 Steel Cable Dresser 8 3.0

89620 Steel Storage Box Only 3 2 8.0

17025 Stiff Spine Conduit Brus 5 10.0

17050 Stiff Spine Conduit Brus 5 10.0

17091 Stiff Spine Conduit Brus 5 10.0

17092 Stiff Spine Conduit Brus 5 10.0

17093 Stiff Spine Conduit Brus 5 10.0

17094 Stiff Spine Conduit Brus 5 10.0

89168 Storage Box One Set: Co 3 3.0

70406 Storage Bracket 11.5 l 1 2.0

89840 Storage Case: Complete O 3 3.0

29642 Storage Reel Drum 2 12.0

79753 Strain Relief Strap 2 9.0

70373 Strand Bracket for VAT 1 8.0

70046 Strand Tensionmeter 2 2.0

70446 Strand Tensionmeter 2 2.0

87253 Submersible Pump 33 lbs 5 3.0

87252 Submersible Pump 60 lbs 5 3.0

87254 Submersible Pump Stand 5 3.0

31210 Support Jack 4 1.0

89382 Swivel Coupling 5 5.0

89380 Swivel Coupling 1/4 in. 5 5.0

08184 Tabbing Shears 9 1.0

01027 Tag CABLE UNDER PRESS 11 6.0

70110 Tangent Dead-End Guying 2 3.0

70099 Tapered Head 5 7.0

89350 Tapered Head 1/4 in. (6. 5 5.0

89352 Tapered Head 3/8 in. (9) 5 5.0

01819 Telco Cable Ratchet Cut 9 2.0

80471 Terminal Reel w/Brake 19 6 2.0

17073 Terminal Socket Wrench 10 2.0

80470 Terminal Wire Reel 18 lb 6 2.0

66250 Texas Cutter 9 1.0

06157 Tinned Lashing Wire 1 4.0

30627 Tip #3 Mapp Ram-Jet 8 1.0

30626 Tip #4 Mapp Ram-Jet 0.5 8 1.0

24424 Tip Heat-Shrink Mapp 1 8 1.0

70625 Trailer Mounted Overhead 13 4.0

88284 Transmitter Battery Pack 5 7.0

88281 Transmitter Tx-3 6 lbs. 5 7.0

71637 Traveling Ground Kit 29 2 1.0

71638 Traveling Ground Kit w/5 2 1.0

71642 Traveling Ground Kit w/5 2 1.0

89768 Trench Feed Lead Roller 4 11.0

89765 Trench Feed Rollers in A 4 11.0

Page 17: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com

Product Listing by DescriptionIndex

P/N Description Section Page

89763 Trench Feed Rollers in S 4 11.0

89767 Triple Corner Rollers 26 4 11.0

89945 Tripod Mount Kit 3 7.0

89318 Tube Collet Assembly 3 4.0

89313 Tube Collet Assembly 10 3 4.0

89314 Tube Collet Assembly 12 3 4.0

89315 Tube Collet Assembly 12. 3 4.0

89316 Tube Collet Assembly 14 3 4.0

89317 Tube Collet Assembly 16 3 4.0

89310 Tube Collet Assembly 5 3 4.0

89311 Tube Collet Assembly 7 3 4.0

89312 Tube Collet Assembly 8 3 4.0

89319 Tube Collet Assembly 8.5 3 4.0

89536 Tube Collet Assy 3 5.0

89541 Tube Collet Assy 10 3 5.0

89542 Tube Collet Assy 12 3 5.0

89543 Tube Collet Assy 12.7 3 5.0

89538 Tube Collet Assy 14 3 5.0

89544 Tube Collet Assy 16 3 5.0

89545 Tube Collet Assy 4 3 5.0

89539 Tube Collet Assy 5 3 5.0

89546 Tube Collet Assy 6 3 5.0

89547 Tube Collet Assy 7 3 5.0

89540 Tube Collet Assy 8 3 5.0

89537 Tube Collet Assy 8.5 3 5.0

71648 Umbrella Accessory Kit i 12 1.0

70098 Umbrella D w/o Lower Pol 12 1.0

80920 Umbrella D with 72"" Wo 12 1.0

80923 Umbrella D with 72"" Wo 12 1.0

06880 Umbrella Tent Bag Only 3 12 3.0

17020 Umbrella Tent w/ Mount A 5 3.0

71551 Underground 32-in. (81) 4 3.0

71552 Underground 40-in. (102) 4 3.0

89622 Universal Bracket 26 lbs 2 8.0

70018 Universal Cable Block 1 4.0

70234 Universal Sheave Block 13 3.0

15836 Universal Swivel Sheave 13 2.0

70202 Universal Swivel Sheave 13 2.0

70651 Universal Swivel Sheave 13 2.0

70151 Utility Manhole Cover 5 1.0

70152 Utility Manhole Cover 5 1.0

70153 Utility Manhole Cover 5 1.0

70154 Utility Manhole Cover 5 1.0

70155 Utility Manhole Cover 5 1.0

70156 Utility Manhole Cover 5 1.0

70157 Utility Manhole Cover 5 1.0

70116 Utility Propane Furnace 8 1.0

89762 V Frame Guide Set 43 l 4 11.0

89761 Valve Control Module w/ 4 11.0

74710 Valve Repair Tool 11 3.0

70105 Varnish Brush Flat 1-1/ 10 7.0

P/N Description Section Page

70106 Varnish Brush Flat 2"" 10 7.0

70375 VATS Cable Block 2.25 1 8.0

70374 VATS Corner or Infeed 1 8.0

31219 Vehicle Receiver Mount w 4 1.0

10142 Washer Duct Cleaner 2.5 5 10.0

10143 Washer Duct Cleaner 3 in 5 10.0

10146 Washer Duct Cleaner 3.5 5 10.0

10144 Washer Duct Cleaner 4 in 5 10.0

10145 Washer Duct Cleaner 5 in 5 10.0

70175 Wheel Chock 13 7.0

70327 Wheel Chock 13 7.0

89910 Whisper Cable Blower 3 7.0

70334 Winch Line Clevis 3 lbs. 13 3.0

01365 Winch Line Hook 4 lbs. ( 13 3.0

75265 Winch Line Screw Pin Sha 13 3.0

01109 Winch Line Spring 4 lbs. 13 3.0

70590 Winch WG w/Left Hand Lev 13 1.0

70121 Windshield 8 1.0

06355 Wire Raising Tool 2 5.0

71517 ZB Manual Cable Lasher 1 3.0

P/N Description Section Page

Page 18: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com

Product Listing by Part NumberIndex

P/N Description Section Page

01008 Standard Scissors 3 oz. 9 2.0

01009 Lead Rasp 8 2.0

01013 Duct Rod Pick Up Tool 5 8.0

01027 Tag CABLE UNDER PRESS 11 6.0

01051 G Cable Block 1 7.0

01109 Winch Line Spring 4 lbs. 13 3.0

01148 Lead Sleeve Opener/Close 8 4.0

01190 Protractor Pull Finder 2 3.0

01233 Cable Vent 8 5.0

01279 Guy Wire Holder 2 3.0

01297 Service Stop Plug Wrench 10 3.0

01315 Mini Cable Block 1 5.0

01365 Winch Line Hook 4 lbs. ( 13 3.0

01368 Manhole Cover Lifter 9 l 5 1.0

01375 Manhole Cover Bolt Socke 5 1.0

01384 Lashing Wire Vise 1 4.0

01408 Modular Crimper RJ45 2 l 7 1.0

01550 Modular Kit RJ11 7 1.0

01815 Pwr Cable Ratchet Cutter 9 2.0

01818 Pwr Cable Ratchet Cutter 9 2.0

01819 Telco Cable Ratchet Cut 9 2.0

01820 Round Cable Slitter for 9 5.0

01825 Round Cable Slitter for 9 5.0

02109 Replacement Blade 9 5.0

03165 6’ (1.6M) Bridle Rope 1 1.0

03504 Extension For Innerduct 4 8.0

04320 Stearine Candles 8 5.0

05431 Disc Brake Shoe 1 oz. 6 2.0

06085 Solder Ladle 8 2.0

06157 Tinned Lashing Wire 1 4.0

06181 Plastic Tree Block 2 10.0

06265 Canvas Bushel Bag 12 4.0

06291 Cable Bender Strap 4 8.0

06320 Orange Stick 10 7.0

06355 Wire Raising Tool 2 5.0

06409 Spiked Shoes 13 7.0

06515 Pressure Testing Valve B 11 7.0

06530 Drop Wire Hook 100/Box 8 2 10.0

06565 Pressure Testing Clamp 11 4.0

06568 Bonding Ribbon Clamp 10 10.0

06679 Paraffin Dipper 8 2.0

06745 Case only 11 1.0

06748 Lead Sleave Spreader 8 4.0

06765 Steel Cable Dresser 8 3.0

06796 Anchor Extractor 10 5.0

06838 Cotton Sleeving 1/8 in. 14 2.0

06839 Cotton Sleeving 5/32 in. 14 2.0

06843 Rubber Splice Bandage 14 2.0

06849 1 H Strand Puller 3/8” – 2 2.0

06867 Manhole Guard Rail 40 lb 5 3.0

06880 Umbrella Tent Bag Only 3 12 3.0

P/N Description Section Page

06931 Rod Grapple 2 lbs. (0.9) 5 8.0

06934 B Pressure Regulator Sha 11 3.0

06970 Drop Wire Hook Strap 2 10.0

07008 C Desiccant B 160 gram 11 8.0

07009 C Desiccant B 650 gram 11 8.0

07013 C Desiccant C 4 oz.bag 11 8.0

07017 C Desiccant B 325 gram 11 8.0

07064 B Cable Core Depressor 11 4.0

07133 B Cable Bond 7 oz. (0.2) 10 9.0

07143 C2 Lasher Storage Case 1 1.0

07151 Shave Hook with Guard 8 2.0

07152 Guard Only 8 2.0

07163 D Cable Block Lifter 7 1 6.0

07166 Double Coax Cable Bende 2 7.0

07170 Pot Hook Handle 8 1.0

07186 Splicer's Seat 10 4.0

07196 B Canvas Pocket 12 4.0

07254 C Reel Payout Frame 2 3.0

07260 B Water Tool Brush 10 7.0

07262 B Carding Brush 4 oz. 8 3.0

07264 B Gas Cylinder Sling 11 3.0

07267 B Pressure Testing Kit 11 1.0

07270 Soap Bucket only 10 oz. 11 4.0

07271 Soap Bucket and Brush 11 4.0

07272 Soap Brush only 11 4.0

07280 B Wheel Chock 13 7.0

07350 Adjustable Manhole Shiel 5 2.0

07380 Drop Wire Clamp 2 10.0

07449 B Lead Sleeve Slitter 8 4.0

07511 B Ratchet Wrench w/ 4 oz 10 2.0

07516 C Regulator Wrench 10 3.0

07560 B Lift Shackle 2 5.0

07575 C Cable Sheath Slitter 3 9.0

07621 B Lashing Wire Remover 1 10.0

07658 B Carding Brush Guard 8 3.0

07667 B Wrench Kit 10 3.0

07668 Pry Bar 10 5.0

07713 B Pressure Testing Ell 11 6.0

07755 B Canvas Tray 12 5.0

07781 B Temporary Bond w/ 0.7 10 9.0

07886 D Lashing Wire Clamp 1 4.0

08007 Overlash Aerial Cable 1 9.0

08093 F Cable Block 3.8 lbs. 1 7.0

08099 F Cable Block Lifter 0 1 7.0

08136 CR Collapsible Power Reel 6 1.0

08137 CB Trailer Drawbar 13 4.0

08140 CR Reel for WG Winch 6 1.0

08172 Manhole Cover Hook 5 1.0

08184 Tabbing Shears 9 1.0

08189 J2 Lasher Storage Case 1 1.0

08192 B Self-Locking Aerial Ha 2 5.0

P/N Description Section Page

08245 F Slack Puller 2 5.0

08273 B Web Slitter for .250" 2 5.0

08329 B Transfer Cord (22 AWG) 10 5.0

08330 C Transfer Cord (19 AWG) 10 5.0

08331 B Chuck 2 9.0

08497 Cable Reel Spacer Clamp 6 3.0

08605 Lashing Wire Grip 1 4.0

08608 H Cable Block 1 7.0

08669 F Pressure Flange 11 6.0

08720 1 Haven’s Grip 1/8” – 1/2 2 2.0

08764 D Insertion Cutting Tool 10 4.0

08952 C Carding Brush 6 oz. (1 8 3.0

09034 C Wheel Chock 13 7.0

09339 Shackle Fitting 3/8 in. 5 5.0

09700 3/8 in. Ratchet Wrench 9 4.0

10102 Flexible Mandrel 2 in. 5 10.0

10103 Flexible Mandrel 3 in. 5 10.0

10104 Flexible Mandrel 4 in. 5 10.0

10105 Flexible Mandrel 5 10.0

10106 Flexible Mandrel 2.5 in. 5 10.0

10107 Flexible Mandrel 3.5 in. 5 10.0

10109 Aluminum Test Mandrels 2 5 11.0

10110 Aluminum Test Mandrels 2 5 11.0

10111 Aluminum Test Mandrels 3 5 11.0

10112 Aluminum Test Mandrels 3 5 11.0

10113 Aluminum Test Mandrels 4 5 11.0

10114 Aluminum Test Mandrels 5 5 11.0

10115 Aluminum Test Mandrels 5 11.0

10116 Long Duct Swabs 2 in. 5 11.0

10117 Long Duct Swabs 3 in. 5 11.0

10118 Long Duct Swabs 3 1/2 in 5 11.0

10119 Long Duct Swabs 4 in. 5 11.0

10120 Long Duct Swabs 5 in. 5 11.0

10121 Long Duct Swabs 6 in. 5 11.0

10122 Long Duct Swabs 5 11.0

10123 Short Duct Swabs 2 in. 5 11.0

10124 Short Duct Swabs 2 1/2 5 11.0

10125 Short Duct Swabs 3 in. 5 11.0

10126 Short Duct Swabs 3 1/2 5 11.0

10127 Short Duct Swabs 4 in. 5 11.0

10128 Short Duct Swabs 5 in. 5 11.0

10129 Short Duct Swabs 6 in. 5 11.0

10130 Short Duct Swabs 5 11.0

10142 Washer Duct Cleaner 2.5 5 10.0

10143 Washer Duct Cleaner 3 in 5 10.0

10144 Washer Duct Cleaner 4 in 5 10.0

10145 Washer Duct Cleaner 5 in 5 10.0

10146 Washer Duct Cleaner 3.5 5 10.0

10152 Heavy Duty Stiff Spine 5 10.0

10153 Heavy Duty Stiff Spine 5 10.0

10154 Heavy Duty Stiff Spine 5 10.0

Page 19: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com

Product Listing by Part NumberIndex

P/N Description Section Page

10155 Heavy Duty Stiff Spine 5 10.0

10156 Heavy Duty Stiff Spine 5 10.0

10157 Heavy Duty Stiff Spine 5 10.0

10158 Heavy Duty Stiff Spine 5 10.0

10500 Lasher Cable G 0.065” 1 2.0

10501 G Lasher Storage Case 1 2.0

10502 Lasher Cable G 0.045” 1 2.0

10553 3 Sheave Cable Block 1 8.0

10554 4 Sheave Cable Block 1 8.0

10700 Econo Block 1 5.0

10701 Econo Block 1 5.0

10727 Aluminum Capstan 6 1.0

10900 Longitudinal Duct Slitte 3 9.0

10901 Double-Sided Replacement 9 4.0

10911 Replacement Wheel 3 10.0

10912 Innerduct Cutter for 2 l 3 10.0

10923 Cable Sheath Slitter 3 10.0

10999 B-Wire Connections 7 3.0

11405 Short Striking Hammer 10 4.0

12161 Oval Canvas Bucket 12 4.0

13681 Manhole Cover Lifter w/S 5 1.0

15237 Replacement Mount Assemb 12 3.0

15300 DEC Connect Kit 4 lbs. 9 7 1.0

15301 MAPP Gas Torch Kit 5 lbs 8 1.0

15304 Cable Cutter 2/0 in. 10 9 1.0

15305 Standard Kit 4 lbs. (1.8 7 1.0

15310 21’ (6.4m) Fiberglass Ha 2 4.0

15314 Split Sheave 48 lbs. 4 3.0

15316 Quadrant Block 18 lbs. 4 3.0

15324 Modular Plug Presser Box 7 1.0

15326 B Ladder Platform 2 7.0

15401 Replacement Needle Clust 10 5.0

15439 216 C Tool 5/8” dia. (16 10 2.0

15443 C Ladder Platform 2 7.0

15470 FO Pulling Capstans 25 4 2.0

15471 Splicer’s Kit 7 oz. (198 10 1.0

15472 FO Pulling Capstans 25 4 2.0

15475 Knife and Scissors Sharp 10 1.0

15479 FO Pulling Capstans 25 4 2.0

15522 Cable Feeder 28 lbs. 4 10.0

15523 Cable Feeder 39 lbs. 4 10.0

15530 Cable Feeder 42 lbs. 4 10.0

15531 Cable Feeder 30 lbs. 4 10.0

15836 Universal Swivel Sheave 13 2.0

17020 Umbrella Tent w/ Mount A 5 3.0

17022 Cable Bending Tool 15 lb 4 8.0

17025 Stiff Spine Conduit Brus 5 10.0

17043 Modular Plug 8 x 8 100/P 7 2.0

17046 Modular Plug 2 x 6 50/Pk 7 2.0

17050 Stiff Spine Conduit Brus 5 10.0

17061 G Bonding Vise Connector 10 10.0

P/N Description Section Page

17064 Die for Handset Modular 7 3.0

17065 Die for Modular Presser 7 3.0

17066 Die for Modular Presser 7 3.0

17073 Terminal Socket Wrench 10 2.0

17074 Modular Plug 4 x 4 100/P 7 2.0

17075 Modular Plug 4 x 6 100/P 7 2.0

17076 Modular Plug 6 x 6 100/P 7 2.0

17077 Modular Plug 8 x 8 Non-k 7 2.0

17078 Modular Plug 2 x 6 100/P 7 2.0

17079 Modular Plug 8 x 8 Non-k 7 2.0

17084 Plastic Duct Seal Compou 14 2.0

17085 Plastic Duct Seal Compou 14 2.0

17089 Kit Grip Mod Plug Presse 7 1.0

17090 Modular Plug 7 2.0

17091 Stiff Spine Conduit Brus 5 10.0

17092 Stiff Spine Conduit Brus 5 10.0

17093 Stiff Spine Conduit Brus 5 10.0

17094 Stiff Spine Conduit Brus 5 10.0

17095 AMP Die for Modular Pres 7 3.0

17096 Die for Modular Presser 7 3.0

17097 Die for Modular Presser 7 3.0

17100 Die for Modular Presser 7 3.0

17126 A6S Die For AMP Shielded 7 3.0

17188 Modular Plug 7 2.0

19192 Paystation Wrench 10 3.0

20551 Manual Wire Unwrapping 10 6.0

20827 Sleeve Unwrapping Tool 10 6.0

22681 Manual Wire Wrap Tool 10 6.0

24008 Plastic Duct Seal Compou 14 2.0

24042 4 Pair Shielded Modular 7 2.0

24061 3-Pair 22/24 AWG RJ11 7 2.0

24062 4-Pair 22/24 AWG RJ45 7 2.0

24065 8-Contact Cat. 6 Plugs 7 2.0

24193 3’ (.9m) Fiberglass Hand 2 4.0

24194 6’ (1.8m) Fiberglass Han 2 4.0

24215 Pipe GroundClamp 10 10.0

24424 Tip Heat-Shrink Mapp 1 8 1.0

24470 Pouch Only 10 1.0

24471 Skinning Knife 10 1.0

25125 Keyed Left Modular Plugs 7 2.0

25126 Keyed Right Modular Plug 7 2.0

25127 Non-keyed Modular Plugs 7 2.0

25179 Replacement Slitting Wir 8 4.0

25523 Splicer's Combination Te 12 2.0

25547 A8S Die For AMP Shielded 7 3.0

25669 D Ring Adaptors 1 lb./pa 12 2.0

25792 Drag Brake Repair Kit 6 2.0

25798 6” Wire Rope Snatch Bloc 2 4.0

25943 AMP Die for Modular Pres 7 3.0

26301 Digging Bars 6 ft. (1.8) 5 2.0

26302 Digging Bars 5 ft. (1.5) 5 2.0

P/N Description Section Page

26303 Bell style Digging Bars 5 2.0

26304 Bell style Digging Bars 5 2.0

27043 4 Pair Shielded Modular 7 2.0

28210 Holder Bucket for Umbrel 12 1.0

28243 Battery Lifter 40 oz. 5 12.0

28249 Replacement Cable Bloc 1 9.0

29139 Extra Step Kit 2 8.0

29165 Chain Lubricant 3 3.0

29446 Rope Adapter 1/4 in. (6) 3 10.0

29447 Rope Adapter 3/8 in. (10 3 10.0

29448 Rope Adapter 3/16 in. (5 3 10.0

29642 Storage Reel Drum 2 12.0

29642 Rope Storage Reel Empty 2 12.0

29888 �Sierra Lasher Storage Case 1 2.0

30140 Hitch Weldment for J2 1 9.0

30149 BALL BEARING REPLACEM 4 4.0

30292 Replacement Cable Guid 1 8.0

30410 Mapp Air Tip #4 0.5 lbs. 8 1.0

30411 8” Manila Rope Snatch Bl 2 4.0

30415 6” Manila Rope Snatch Bl 2 4.0

30626 Tip #4 Mapp Ram-Jet 0.5 8 1.0

30627 Tip #3 Mapp Ram-Jet 8 1.0

30780 Apollo Lasher Storage 1 2.0

30901 Hydraulic hoses (2) 4 1.0

31115 Hydraulic Motor Assembly 4 1.0

31116 Self-Support Frame 93 lb 4 1.0

31117 Foot Control Valve 54 lb 4 1.0

31210 Support Jack 4 1.0

31219 Vehicle Receiver Mount w 4 1.0

32221 Innerduct Clamp For GMP 5 9.0

32800 Hydraulic Power Pack 3 1.0

32906 Breeze Cable Seal 3 6.0

32937 Extension For Innerduct 5 9.0

34519 Foot Control Valve 10 lb 4 11.0

38100 4 Roller Cable Block 1 6.0

46113 Poly Cable Dresser 2 lbs 8 3.0

53699 Breakaway Swivels 33211 4 2.0

53700 Breakaway Swivels 30332 4 2.0

53701 Breakaway Swivels 34786 4 2.0

53702 Breakaway Swivels 34341 4 2.0

53703 Breakaway Swivels 34342 4 2.0

53704 Breakaway Swivels 34343 4 2.0

53705 Breakaway Swivels 34344 4 2.0

53706 Breakaway Swivels 34787 4 2.0

60510 Innerduct Pulling Eyes 1 4 3.0

60512 Innerduct Pulling Eyes 1 4 3.0

60515 Innerduct Pulling Eyes 1 4 3.0

60520 Innerduct Pulling Eyes 2 4 3.0

60580 Main Cable Feeder 4 10.0

60581 Extension Cable Feeder 4 10.0

Page 20: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com

Product Listing by Part NumberIndex

P/N Description Section Page

60582 Extension Cable Feeder 4 10.0

60583 Main Cable Feeder (102) 4 10.0

60584 Cable Feeder Nozzles 4 4 10.0

60585 Main Cable Feeder (127) 4 10.0

60586 Extension Cable Feeder 4 10.0

60587 Main Cable Feeder (152) 4 10.0

60590 Cable Feeder Nozzles 4 4 10.0

60591 Cable Feeder Nozzles 4 4 10.0

60592 Cable Feeder Nozzles 4 4 10.0

60593 Cable Feeder Nozzles 4 4 10.0

60596 Cable Feeder Nozzles 4 4 10.0

60597 Cable Feeder Nozzles 4 4 10.0

60598 Cable Feeder Nozzles 6 4 10.0

60599 Cable Feeder Nozzles 5 4 10.0

60600 Extension Cable Feeder 4 10.0

60680 Signature Bag 5 lbs. (2) 12 4.0

60681 Carry Strap 12 4.0

61510 Innerduct Pulling Eyes 1 4 3.0

61512 Innerduct Pulling Eyes 1 4 3.0

61515 Innerduct Pulling Eyes 1 4 3.0

61520 Innerduct Pulling Eyes 2 4 3.0

61566 Solder Melting Pot 6 in. 8 1.0

61568 Solder Melting Pot 8 in. 8 1.0

62450 Flat & Formed Wiping Clo 8 5.0

62451 Flat & Formed Wiping Clo 8 5.0

62452 Flat & Formed Wiping Clo 8 5.0

62453 Flat & Formed Wiping Clo 8 5.0

62454 Flat & Formed Wiping Clo 8 5.0

62455 Flat & Formed Wiping Clo 8 5.0

62456 Flat & Formed Wiping Clo 8 5.0

62457 Flat & Formed Wiping Clo 8 5.0

62458 Flat & Formed Wiping Clo 8 5.0

62460 Flat & Formed Wiping Clo 8 5.0

62461 Flat & Formed Wiping Clo 8 5.0

62462 Flat & Formed Wiping Clo 8 5.0

62463 Flat & Formed Wiping Clo 8 5.0

62464 Flat & Formed Wiping Clo 8 5.0

62465 Flat & Formed Wiping Clo 8 5.0

63540 construction chain 1/2 4 8.0

63541 construction chain 4 8.0

64264 4” Utility Snatch Block 2 3.0

64910 Needle Point Test Pick 4 10 6.0

64911 Needle Point Test Point 10 6.0

65010 Soap Solution Regular Gr 11 8.0

65011 Soap Solution Winter Gra 11 8.0

65031 D Type Tree Guard 2 10.0

65032 D Type Tree Guard 2 10.0

65033 D Type Tree Guard 2 10.0

65034 D Type Tree Guard 2 10.0

65035 D Type Tree Guard 2 10.0

65036 L Type Tree Guard 2 10.0

P/N Description Section Page

65037 L Type Tree Guard 2 10.0

65038 L Type Tree Guard 2 10.0

66000 1-1/4” x 6’ Extension Se 2 4.0

66001 1-3/4” x 6’ Extension Se 2 4.0

66003 1-1/4” x 2’ Head Section 2 4.0

66005 1-1/4” x 6’ Head Section 2 4.0

66050 Cable Reel Jack (Sold in 6 3.0

66051 Reel Jack Spindle 6 3.0

66250 Texas Cutter 9 1.0

66731 Canvas Bucket 12 in. (30 12 4.0

66732 Canvas Bucket 12 in. (30 12 4.0

66739 Canvas Bucket 9 in. (229 12 4.0

66840 Cotton Tape 0.50 in (13) 14 1.0

66841 Cotton Tape 1.0 in (25) 14 1.0

66880 Lettering Dies (Set of t 8 3.0

66881 Numbering Die 8 oz. (0.2 8 3.0

67220 Soldering Iron 3 1-1/2 l 8 2.0

67221 Soldering Iron 2 1 lb (0 8 2.0

67222 Soldering Iron 4 2 lb (0 8 2.0

67223 Soldering Iron 8 2.0

67261 Sign Bracket 2 11.0

67262 Sign Bracket 2 11.0

67263 Sign Bracket 2 11.0

67264 Sign Bracket 2 11.0

67266 Sign Bracket 2 11.0

67267 Sign Bracket 2 11.0

67272 Muslin Roll 2 in. (51) w 14 2.0

67274 Muslin Roll 4 in. (102) 14 2.0

67276 Muslin Roll 6 in. (153) 14 2.0

67970 Cable Drill .221 inch Dr 8 4.0

67971 Cable Drill .221 inch Dr 8 4.0

68490 B Strand Puller Figure-8 2 2.0

68492 L Strand Puller 3/16” – 2 2.0

68493 Haven’s Grip 2 2.0

68590 Overhead Handline 2 5.0

68592 handlines 5/8 in. x 20 4 8.0

68593 handlines 3/8 in. x 50 4 8.0

68595 handlines 3/8 in. x 100 4 8.0

68596 handlines 1/2 in. X 60 4 8.0

68597 handlines 4 8.0

68631 DR Tape 0.045 in. (1.14) 14 1.0

68632 DR Tape 0.045 in. (1.14) 14 1.0

68681 Bonding Ribbon 10 9.0

68690 B Cable Transfer Clip 2 10 9.0

68691 B Cable Clip (Clip Only) 10 9.0

68692 C Cable Transfer Clip 2 10 9.0

68693 C Cable Clip (Clip Only) 10 9.0

69140 M Valve Stem Cap Package 11 7.0

69142 R Valve Stem Cap Package 11 7.0

69143 R Valve Stem Cap Packag 11 7.0

69144 C Valve Stem Cap Package 11 7.0

P/N Description Section Page

69145 C Valve Stem Cap Packag 11 7.0

69146 F Valve Stem Cap Package 11 7.0

69147 F Valve Stem Cap Package 11 7.0

69148 P Valve Stem Cap Package 11 7.0

69149 Inside Valve Core Only 11 7.0

69494 Chicago Grip Bare Wire 1 2 2.0

70001 Cable Feeder Nozzles 6 4 10.0

70002 Cable Feeder Nozzles 6 4 10.0

70003 Cable Feeder Nozzles 6 4 10.0

70004 Cable Feeder Nozzles 6 4 10.0

70005 Cable Feeder Nozzles 6 4 10.0

70006 Cable Feeder Nozzles 5 4 10.0

70007 Cable Feeder Nozzles 5 4 10.0

70008 Cable Feeder Nozzles 5 4 10.0

70009 Cable Feeder Nozzles 5 4 10.0

70011 Guard Halo for J2 Lash 1 1.0

70012 Guard Halo for J2 Lash 1 1.0

70018 Universal Cable Block 1 4.0

70019 Splicer's Scissors Pouch 9 2.0

70020 Polyethylene Manhole Shi 5 2.0

70021 Polyethylene Manhole Shi 5 2.0

70022 Fiber Optic Cable Bloc 1 7.0

70034 Splicer's Combination Te 12 2.0

70039 Replacement Sealing Tube 5 2.0

70045 Shackle 4 3.0

70046 Strand Tensionmeter 2 2.0

70049 Replacement Sealing Tube 5 2.0

70053 D Cable Bond 10 9.0

70053 C Temporary Bond 10 9.0

70055 Aerial Cable Guide 1 8.0

70077 Splicer’s Ladder Tent Co 2 8.0

70088 Lineman’s Hammer 2 6.0

70089 Replacement Handle Only 10 4.0

70092 Duct Rod Kit 1/4 in. x 6 5 7.0

70093 Heavy Duty Rod 1 lb. 8 5 7.0

70094 Heavy Duty Rod 2 lb. 8 5 7.0

70098 Umbrella D w/o Lower Pol 12 1.0

70099 Tapered Head 5 7.0

70100 Lineman’s Wrench 2 6.0

70103 Plastic Spudger 10 7.0

70105 Varnish Brush Flat 1-1/ 10 7.0

70106 Varnish Brush Flat 2"" 10 7.0

70107 Paint Brush Flat 4"" (1 10 7.0

70110 Tangent Dead-End Guying 2 3.0

70115 Cable Sheath Punch 10 6.0

70116 Utility Propane Furnace 8 1.0

70117 Furnace Windshield 1 lbs 8 1.0

70118 Pressure Regulator with 8 1.0

70119 Female/male adaptor 11 2.0

70121 Windshield 8 1.0

70130 Ball Bearing Swivels 10 4 4.0

Page 21: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com

Product Listing by Part NumberIndex

P/N Description Section Page

70132 Gas Engine Ventilation B 5 3.0

70133 AC Electric Ventilation 5 4.0

70136 Ball Bearing Swivels 2, 2 13.0

70137 Ball Bearing Swivels 5 4 4.0

70138 Ball Bearing Swivels 7 4 4.0

70140 Ball Bearing Swivels 25 4 4.0

70151 Utility Manhole Cover 5 1.0

70152 Utility Manhole Cover 5 1.0

70153 Utility Manhole Cover 5 1.0

70154 Utility Manhole Cover 5 1.0

70155 Utility Manhole Cover 5 1.0

70156 Utility Manhole Cover 5 1.0

70157 Utility Manhole Cover 5 1.0

70158 Manhole Cover Lifter 5 2.0

70159 Manhole Cover Lifter 11 5 2.0

70160 Grate Lifter 5 2.0

70175 Wheel Chock 13 7.0

70184 Handline 5/8" X 30' W/ 5 3.0

70188 Breakaway Swivels 26325 4 2.0

70190 Lasher Tow Rope 1 3.0

70191 Breakaway Swivels 26326 4 2.0

70193 F Cable Block w/Keeper 1 7.0

70200 Self-Support Cable Block 2 9.0

70202 Universal Swivel Sheave 13 2.0

70204 Splicer’s Ladder Tent 2 8.0

70210 Mud Bucket 5 3.0

70212 Extension Bolts 2 10.0

70213 Reinforcing Straps 2 10.0

70214 Splicer’s Ladder Tent 2 8.0

70220 Reel Lifter 3000 lbs. 6 6 4.0

70221 C Pressure Testing Pump 11 1.0

70223 Replacement Head Only 10 4.0

70229 Splicer's Combination Te 12 2.0

70234 Universal Sheave Block 13 3.0

70240 Reel Lifter 4500 lbs. 6 4.0

70250 Star Shaped Floor Socket 4 1.0

70265 D Cable Block Pole Han 1 6.0

70274 Pole Trailer Chain Binde 13 6.0

70276 Pole Trailer Chain Binde 13 6.0

70277 Pole Trailer Chain Binde 13 6.0

70278 Pole Trailer Chain Binde 13 6.0

70279 Pole Trailer Chain Binde 13 6.0

70280 Pole Trailer Chain Binde 13 6.0

70283 Manhole Sheave 32 lbs. 4 8.0

70284 Manhole Sheave 55 lbs. 4 8.0

70285 Manhole Sheave 65 lbs. 4 8.0

70298 Cable Pulling Harnesses 4 5.0

70299 Cable Pulling Harnesses 4 5.0

70300 Cable Pulling Harnesses 4 5.0

70312 Cable Pulling Harnesses 4 5.0

70313 Cable Pulling Harnesses 4 5.0

P/N Description Section Page

70314 Cable Pulling Harnesses 4 5.0

70327 Wheel Chock 13 7.0

70329 Capstan Drive 13 6.0

70334 Winch Line Clevis 3 lbs. 13 3.0

70335 Pole Mount Block 1 7.0

70336 B Overlash Block 1 5.0

70338 FO Pulling Capstans 25 4 2.0

70347 Self Storing HD Hose 5 4.0

70348 Pole Mount Block 1 7.0

70351 FO Pulling Capstans 32 ( 4 2.0

70352 Dielectric Umbrella wit 12 1.0

70353 Dielectric Umbrella w/o 12 1.0

70355 Lashing Wire Shears 1 10.0

70363 Aluminum Manhole Platfor 5 4.0

70364 Aluminum Manhole Platfor 5 4.0

70367 Pole Trailer Chain Binde 13 6.0

70368 Pole Trailer Chain Binde 13 6.0

70372 Pole Mount Bracket for 1 8.0

70373 Strand Bracket for VAT 1 8.0

70374 VATS Corner or Infeed 1 8.0

70375 VATS Cable Block 2.25 1 8.0

70376 Sheave Pole Mount Asse 1 8.0

70377 Cross Peen Driving Hamme 10 4.0

70380 Non-Metallic Reflective 10 8.0

70381 FO Pulling Capstans 32 4 2.0

70391 FO Pulling Capstans 25 4 2.0

70400 Lasher Apollo 38 lbs. 1 2.0

70403 Reel Caddy External Mult 6 3.0

70404 Reel Caddy 10 lbs. (4.54 6 3.0

70406 Storage Bracket 11.5 l 1 2.0

70407 Reel Caddy XL 6 3.0

70409 Expanding Jaw Pulling Ey 4 4.0

70410 Expanding Jaw Pulling Ey 4 4.0

70411 Expanding Jaw Pulling Ey 4 4.0

70412 Expanding Jaw Pulling Ey 4 4.0

70413 Expanding Jaw Pulling Ey 4 4.0

70414 Expanding Jaw Pulling Ey 4 4.0

70415 Expanding Jaw Pulling Ey 4 4.0

70426 Replacement Blade 0.1 lb 3 9.0

70427 Cordless Slitter 1-2 in. 3 9.0

70430 Hinged Cable Block 1 8.0

70431 24 in. Cable Block Pus 1 5.0

70432 36 in. Cable Block Pus 1 5.0

70433 216 C Tool 7/8” dia. (22 10 2.0

70438 90 Degree Corner Block w 2 6.0

70439 45 Degree Corner Block w 2 6.0

70440 Pole Mount Bracket Ada 1 8.0

70446 Strand Tensionmeter 2 2.0

70449 90 Degree Corner Block 1 2 6.0

70450 45 Degree Corner Block 1 2 6.0

70451 Alligator Wrench 2 6.0

P/N Description Section Page

70454 45 Degree Double Corner 2 6.0

70455 90 Degree Double Corner 2 6.0

70471 FO Pulling Capstans 32 4 2.0

70472 FO Pulling Capstans 32 4 2.0

70473 FO Pulling Capstans 40 4 2.0

70475 FO Pulling Capstans 40 4 2.0

70478 FO Pulling Capstans 40 4 2.0

70479 Hydraulic Puller with St 4 1.0

70480 Hydraulic Puller with S 4 1.0

70482 216 C Tool with Security 10 2.0

70483 Hydraulically Limited Ca 4 1.0

70484 Hydraulically Limited Ca 4 1.0

70485 Security Hex Adaptor 10 2.0

70486 Hydraulically Limited Ca 4 1.0

70487 Stanley Hydraulic Power 4 1.0

70491 Inflatable Line Carriers 3 12.0

70495 Lasher Breakaway Pulli 1 2.0

70498 Inflatable Line Carriers 3 12.0

70499 Inflatable Line Carriers 3 12.0

70500 Inflatable Line Carriers 3 12.0

70501 Cable Feeder 18 lbs. 4 10.0

70502 Cable Feeder 22 lbs. 4 10.0

70503 Cable Feeder 26 lbs. 4 10.0

70504 Cable Feeder 33 lbs. 4 10.0

70505 Duct Projectile for 1 in 3 11.0

70506 Duct Projectile for 1.25 3 11.0

70507 Battery Charger 1 lb. (0 3 9.0

70508 Duct Projectile for 1.38 3 11.0

70509 Innerduct Projectile for 3 11.0

70510 Duct Projectilefor 1.5 i 3 11.0

70511 Duct Projectile for 1.88 3 11.0

70512 Innerduct Projectile for 3 11.0

70513 Duct Projectile for 2 in 3 11.0

70514 Duct Projectile for 2.5 3 11.0

70515 Duct Projectile for 3 in 3 11.0

70516 Duct Projectile for 4 in 3 11.0

70517 Duct Projectile for 5 in 3 11.0

70518 Duct Projectile for 6 in 3 11.0

70519 12V Battery Cordless 3 9.0

70520 Bayonet Shaft 13 5.0

70521 Nylon Spudger 10 7.0

70524 CD3 Winch w/Ball Bearing 13 1.0

70527 Missile for 2 in. (51) 3 11.0

70528 Missile for 3 in. (76) 3 11.0

70529 Missile for 4 in. (102) 3 11.0

70530 Intermittent Duty Winch 13 1.0

70531 Missile for 5 in. (127) 3 11.0

70532 Missile for 6 in. (152) 3 11.0

70533 Foam Line Carriers 0.5 3 12.0

70534 Replacement blade 3 8.0

70534 Foam Line Carriers 0.75 3 12.0

Page 22: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com

Product Listing by Part NumberIndex

P/N Description Section Page

70535 Foam Line Carriers 1 in. 3 12.0

70536 Foam Line Carriers 1.25 3 12.0

70537 Foam Line Carriers 1.5 3 12.0

70538 Foam Line Carriers 2 in. 3 12.0

70539 Foam Line Carriers 2.5 3 12.0

70540 Foam Line Carriers 3 in. 3 12.0

70541 Foam Line Carriers 3.5 3 12.0

70542 Foam Line Carriers 4 in. 3 12.0

70543 Foam Line Carriers 5 in. 3 12.0

70544 Foam Line Carriers 6 in. 3 12.0

70546 Cordless Slitter 3 in. D 3 9.0

70547 Cordless Slitter 4 in. D 3 9.0

70548 Cordless Slitter 5 in. D 3 9.0

70559 Conduit Couplers 1.660 ( 3 8.0

70560 Conduit Couplers 1.900 ( 3 8.0

70561 Conduit Couplers 2.375 ( 3 8.0

70562 Conduit Couplers 2.375 ( 3 8.0

70564 Cable Feeding Sheaves 3 4 9.0

70565 Cable Feeding Sheaves 4 4 9.0

70566 Cable Feeding Sheaves 4 4 9.0

70567 Cable Feeding Sheaves 5 4 9.0

70581 Cable Feeding Sheaves 3 4 9.0

70582 Cable Feeding Sheaves 4 4 9.0

70583 Cable Feeding Sheaves 4 4 9.0

70584 Cable Feeding Sheaves 5 4 9.0

70585 Cable Feeding Sheaves 6 4 9.0

70586 Cable Feeding Sheaves 6 4 9.0

70590 Winch WG w/Left Hand Lev 13 1.0

70593 Rope Connector 0.3 lbs. 2 13.0

70594 Rope Connector 2 13.0

70595 ADSS Starter Blocks 2 12.0

70601 CD Lite Underwind with s 13 2.0

70602 CD Lite Underwind with e 13 2.0

70605 Sidewinder Fiber Optic P 4 1.0

70613 ADSS Hydraulic Winch 2 12.0

70613 Hydraulic Winch Cable Po 13 3.0

70614 ADSS Starter Blocks 2 12.0

70615 ADSS In Line Blocks 2 12.0

70616 ADSS In Line Blocks 2 12.0

70619 Payout Stand 30 lbs (13. 2 12.0

70621 ADSS Starter Blocks 2 12.0

70624 Rope Storage Reel w/Rope 2 12.0

70624 Drum Overhead Line Winc 13 4.0

70625 Trailer Mounted Overhead 13 4.0

70626 Cable Pulling Sled 1 8.0

70627 Lightweight Capstan Winc 13 4.0

70628 8” Wire Rope Snatch Bloc 2 4.0

70629 Hook Safety Latch for 70 2 4.0

70630 Modular Plug Presser w/ 7 1.0

70631 Modular Plug Presser w/ 7 1.0

70632 Modular Plug Presser w/ 7 1.0

P/N Description Section Page

70633 Modular DEC Connect Pres 7 1.0

70635 Modular Plug Presser w/ 7 1.0

70640 Jamb Skid 48 - 85 in. (1 4 9.0

70643 Jamb Skid 84 - 121 in. ( 4 9.0

70646 Jamb Skid 4 9.0

70649 Cable Pulling Sled 1 8.0

70651 Universal Swivel Sheave 13 2.0

70657 Cordless Slitter 6 in. D 3 9.0

70660 Flexible Cable Pulling G 4 5.0

70661 Flexible Cable Pulling G 4 5.0

70662 Flexible Cable Pulling G 4 5.0

70663 Flexible Cable Pulling G 4 5.0

70664 Flexible Cable Pulling G 4 5.0

70670 Double Weave Flexible Pu 2 13.0

70671 Double Weave Flexible Pul 2 13.0

70672 Double Weave Flexible Pu 2 13.0

70673 Flexible Cable Pulling G 4 5.0

70674 Flexible Cable Pulling G 4 5.0

70675 Flexible Cable Pulling G 4 5.0

70676 Flexible Cable Pulling G 4 5.0

70677 Flexible Cable Pulling G 4 5.0

70680 Flexible Cable Pulling G 4 5.0

70681 Flexible Cable Pulling G 4 5.0

70682 Flexible Cable Pulling G 4 5.0

70683 Flexible Cable Pulling G 4 5.0

70684 Flexible Cable Pulling G 4 5.0

70690 Innerduct Cutter up to 0 3 10.0

70691 Replacement Blade 3 10.0

70692 Split Aluminum Duct Coup 3 8.0

70693 Split Aluminum Duct Coup 3 8.0

70694 Split Aluminum Duct Coup 3 8.0

70695 Split Aluminum Duct Coup 3 8.0

71130 Rope to Rope 2.7 lbs. 4 6.0

71131 Rope to Swivel 2.1 lbs. 4 6.0

71132 Rope to Swivel 4 6.0

71140 Heavy Duty Rope Connecto 4 6.0

71141 Heavy Duty Rope Connecto 4 6.0

71142 Heavy Duty Rope Connecto 4 6.0

71143 Heavy Duty Rope Connecto 4 6.0

71399 Breakaway Swivels 26309 4 2.0

71400 Breakaway Swivels 26310 4 2.0

71401 Breakaway Swivels 26305 4 2.0

71402 Breakaway Swivels 30333 4 2.0

71403 Breakaway Swivels 26306 4 2.0

71404 Breakaway Swivels 26307 4 2.0

71405 Breakaway Swivels 26308 4 2.0

71406 Breakaway Swivels 25494 4 2.0

71408 Breakaway Swivels 25493 4 2.0

71422 Lasher Cable C2 .045” 1 1.0

71424 Lasher Cable C2 .045” 1 1.0

71440 CR Tape 28 in. (711) W x 14 1.0

P/N Description Section Page

71441 CR Tape 36 in. (914) W x 14 1.0

71500 Lasher Sierra w/case W 1 2.0

71517 ZB Manual Cable Lasher 1 3.0

71518 Lashing Wire for ZB La 1 3.0

71530 Stainless Steel Lashing Wire 1 3.0

71531 Stainless Steel Lashing Wire 1 3.0

71532 Stainless Steel Lashing Wire 1 3.0

71533 Stainless Steel Lashing Wire 1 3.0

71534 Stainless Steel Lashing Wire 1 3.0

71535 Stainless Steel Lashing Wire 1 3.0

71540 Stainless Steel Lashing Wire 1 3.0

71541 Stainless Steel Lashing Wire 1 3.0

71542 Stainless Steel Lashing Wire 1 3.0

71543 Multi-Angle Self-Adjus 1 9.0

71546 Battery Lifter Complete 5 12.0

71547 Battery Lifter Tray 17 5 12.0

71548 Shackle 30 lbs. (17) 4 3.0

71549 OH FO Shackle w/24” (61c 2 7.0

71550 24” (61cm) Sheave Only 1 2 7.0

71551 Underground 32-in. (81) 4 3.0

71552 Underground 40-in. (102) 4 3.0

71554 OH FO Shackle Only 2 7.0

71560 Sheave & Shackle Assembl 4 3.0

71561 Sheave & Shackle Assembl 4 3.0

71562 Sheave & Shackle Assembl 4 3.0

71563 90 Degree 3-Roller Ins 1 9.0

71566 Pole Trailer Strap Binde 13 6.0

71567 Pole Trailer Strap Binde 13 6.0

71568 Pole Trailer Strap Binde 13 6.0

71569 Pole Trailer Strap Binde 13 6.0

71570 Pole Trailer Strap Binde 13 6.0

71572 Adapter, Angle Umbrella 12 1.0

71574 Electric CEV Hoist w/ St 5 12.0

71637 Traveling Ground Kit 29 2 1.0

71638 Traveling Ground Kit w/5 2 1.0

71642 Traveling Ground Kit w/5 2 1.0

71643 Cable Sheave Shackles 3 4 6.0

71644 Cable Sheave Shackles 4 4 6.0

71645 Cable Sheave Shackles 4 6.0

71647 Adapter, Angle with 1 P 12 1.0

71648 Umbrella Accessory Kit i 12 1.0

71649 Kit Tripod w/Bag 12 1.0

71661 Double Coax Cable Bender 2 7.0

71667 Adapter Tool of Extensio 2 4.0

71669 Reel Buck w/42"" Spindl 6 3.0

71670 C Cement 14 2.0

71678 Reel Buck w/60"" Spindl 6 3.0

71679 Innerduct Reel Buck 6 3.0

71691 B Lashed Cable Supports 2 11.0

71692 B Lashed Cable Supports 2 11.0

71693 B Lashed Cable Supports 2 11.0

Page 23: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com

Product Listing by Part NumberIndex

P/N Description Section Page

71694 B Lashed Cable Supports 2 11.0

71695 B Lashed Cable Supports 2 11.0

71698 B Lashed Cable Supports 2 11.0

71710 Pulling Frames 3 in. x 1 4 9.0

71711 Pulling Frames 4 in. x 1 4 9.0

71712 Pulling Frames 5 in. x 1 4 9.0

71713 Pulling Frames 3 in. x 1 4 9.0

71714 Pulling Frames 4 in. x 1 4 9.0

71715 Pulling Frames 5 in. x 1 4 9.0

71716 Replacement Pin 4 9.0

71717 Replacement Pin 4 9.0

71721 Cable Sheaves 3 in. 26-1 4 7.0

71722 Cable Sheaves 3 in. 20 4 7.0

71723 Cable Sheaves 3 in. 11 4 7.0

71724 Cable Sheaves 4 in. 26-1 4 7.0

71725 Cable Sheaves 4 in. 20 4 7.0

71726 Cable Sheaves 4 in. 11 4 7.0

71727 Cable Sheaves Cable Shea 4 7.0

71728 Cable Sheaves 5 in. 20 4 7.0

71729 Cable Sheaves 5 in. 4 7.0

71731 Cable Sheaves 3 in. 11 4 7.0

71732 Cable Sheaves 4 in. 11 4 7.0

71733 Cable Sheaves 5 in. 11 4 7.0

71734 Cable Sheaves 3 in. 20 4 7.0

71735 Cable Sheaves 4 in. 20 4 7.0

71736 Cable Sheaves 5 in. 20 4 7.0

71737 Cable Sheaves 3 in. 26-1 4 7.0

71738 Cable Sheaves 4 in. 26-1 4 7.0

71739 Cable Sheaves 5 in. 4 7.0

72030 B Splice Covering 48 in. 12 5.0

72031 B Splice Covering 20 in. 12 5.0

72090 Polyethylene Tape 3 in. 14 1.0

72091 Polyethylene Tape 3 in. 14 1.0

72301 B Strand Tie Strap 1.4 l 2 11.0

72302 B Strand Tie Strap 2 11.0

72410 B Solder 5 lbs. (2.2) 8 5.0

72411 C Solder Small Spool 1 l 8 5.0

72412 C Solder Large Spool 8 5.0

72673 B Pressure Testing Kit 2 11 1.0

72680 D Cable Block 3.8 lbs. 1 6.0

72860 Cable Racking Jack 11 lb 4 8.0

72861 Cable Racking Jack 11 lb 4 8.0

73017 Hex Socket Wrench 10 2.0

73305 Cable Block 1 5.0

74055 E Cable Block w/ Halo 10 2 9.0

74060 B Cable Block Frame End 2 9.0

74061 C Cable Block Frame In L 2 9.0

74062 D Cable Block Frame Ligh 2 9.0

74063 E Cable Block Frame Heav 2 9.0

74064 F Cable Block Frame All 2 9.0

74108 Extension Bolts 2 10.0

P/N Description Section Page

74109 Extension Bolts 2 10.0

74110 Reinforcing Straps 2 10.0

74111 Reinforcing Straps 2 10.0

74218 B Cable Guard 2 11.0

74222 B Cable Guard 2 11.0

74226 B Cable Guard 2 11.0

74228 B Cable Guard 2 11.0

74230 Splicer's Mirror 8 4.0

74231 Splicer's Mirror BELL SP 8 4.0

74510 C Cable Drill 1 lb. (.45 8 4.0

74511 Replacement Bit 8 4.0

74530 B Cable Reel Jack 86 lbs 6 3.0

74531 Reel Jack Spindle 6 3.0

74540 Braked Drum Stand 6 2.0

74700 B Pressure Gauge 11 1.0

74710 Valve Repair Tool 11 3.0

75000 750 Cable Block 1 6.0

75118 Combination Wrench w/ 4 10 2.0

75119 Combination Wrench w/ 4 10 2.0

75244 Cutter Guy Strand 3/8 in 9 4.0

75245 1,000 MCM Ratchet Cutte 9 3.0

75246 500 MCM Cable Cutter 3.5 9 1.0

75247 1000 MCM Cable Cutter 9 1.0

75248 556 ACSR Ratchet Cutters 9 3.0

75249 750 MCM Ratchet Cutters 9 3.0

75250 Ratcheting Cable Cutter 9 3.0

75251 Leather Scabbard Only 9 3.0

75254 Cutter Guy Strand 1/2 in 9 4.0

75255 Hard Cable Ratchet Cutte 9 3.0

75265 Winch Line Screw Pin Sha 13 3.0

75267 CD3 Winch w/Ball Bearing 13 1.0

75268 3-Roller Starter Guide 1 9.0

75330 Cable Drill .480 inch Dr 8 4.0

75331 Cable Drill .480 inch Dr 8 4.0

75481 C Pressure Flange 25/pk. 11 7.0

75482 C Pressure Flange Plug 2 11 7.0

75483 D Pressure Flange 25/pk. 11 7.0

75530 C High Pressure Gas Regu 11 2.0

75531 C High Pressure Gas Regu 11 2.0

75980 C Drop Wire Reel 38 lbs. 6 2.0

75981 Mounting Bracket 5 lbs. 6 2.0

75984 Small Pole Mount Spindle 6 4.0

75985 Large Pole Mount Spindle 6 4.0

75987 Pole Mount C Drop Wire R 6 2.0

76001 B Sealing Cord .305 in. 14 1.0

76011 B Sealing Tape .125 in. 14 1.0

76040 C Ladder Tent Canvas Cov 12 2.0

76041 Splicer's Ladder and C L 12 2.0

76531 D Warning Flag 6 oz. (17 10 8.0

76532 D Warning Flags Pole Tra 10 8.0

76532 Flag Drilled Replacement 13 6.0

P/N Description Section Page

76760 B Pressure Testing Hose 11 5.0

76761 B Pressure Testing Hose 11 5.0

76762 B Pressure Testing Hose 11 5.0

76763 B Pressure Testing Hose 11 5.0

76764 B Pressure Testing Hose 11 5.0

76765 B Pressure Testing Hose 11 5.0

76766 B Pressure Testing Hose 11 5.0

76767 B Pressure Testing Hose 11 5.0

76768 B Pressure Testing Hose 11 5.0

76769 B Pressure Testing Hose 11 5.0

76770 C Pressure Testing Hose 11 5.0

76771 C Pressure Testing Hose 11 5.0

76772 C Pressure Testing Hose 11 5.0

76773 C Pressure Testing Hose 11 5.0

76774 C Pressure Testing Hose 11 5.0

76780 D&E Pressure Hose 6 ft. 8 2.0

76781 D&E Pressure Hose 8 ft. 8 2.0

76783 D&E Pressure Hose 12.5 f 8 2.0

76784 D&E Pressure Hose 25 ft. 8 2.0

76790 D&E Pressure Hose 10 ft. 8 2.0

76791 D&E Pressure Hose 30 ft. 8 2.0

77170 C Pressure Gauge 4 lbs. 11 1.0

77171 C Pressure Gauge Case on 11 1.0

77172 C Pressure Gauge w/18 in 11 1.0

77401 Sealing Clamps for cable 11 7.0

77402 Sealing Clamps for cable 11 7.0

77404 Sealing Clamps for cable 11 7.0

77405 Sealing Clamps for cable 11 7.0

77966 Ground Vise Connector 10 10.0

79283 D Cabinet Balcony 93 lbs 2 8.0

79600 E Cable Leader 48 lbs (2 2 8.0

79601 Modified E Cable Leader 2 8.0

79750 B Sheave Support 6 lbs ( 2 9.0

79751 B Sheave Support 10/Box 2 9.0

79753 Strain Relief Strap 2 9.0

80470 Terminal Wire Reel 18 lb 6 2.0

80471 Terminal Reel w/Brake 19 6 2.0

80472 Disc Brake Retro-fit Kit 6 2.0

80771 B Connecting Links 1/4 4 4.0

80773 B Connecting Links 3/8 4 4.0

80775 B Connecting Links 1/2 4 4.0

80777 B Connecting Links 3/4 4 4.0

80779 B Connecting Links 4 4.0

80920 Umbrella D with 72"" Wo 12 1.0

80921 Case, Umbrella 1 lbs. ( 12 1.0

80923 Umbrella D with 72"" Wo 12 1.0

80924 Lower Pole Assembly with 12 1.0

80975 Heavy Duty Manhole Sheav 4 8.0

81390 Portable Pole Binder w/ 13 4.0

81392 Portable Pole Binder w/ 13 4.0

81393 Portable Pole Binder w/ 13 4.0

Page 24: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com

Product Listing by Part NumberIndex

P/N Description Section Page

81460 E Lashing Wire Clamp 1 4.0

81461 E Lashing Wire Clamp 1 4.0

81620 Cable-Sheath Chipping/Sp 8 3.0

81921 Self-Locking Aerial Hand 2 5.0

82210 B Pressure Testing Regul 11 2.0

82211 C High Pressure Gas Regu 11 2.0

82213 C High Pressure Gas Regu 11 2.0

82214 Regulator Hard Hat 11 2.0

82290 D Workmen's Tent 30 lbs. 12 2.0

82291 Splicer's Combination Te 12 2.0

82291 D Workmen's Tent Frame O 12 2.0

82292 D Workmen's Tent Canvas 12 2.0

82311 H Aerial Tent Frame Only 12 3.0

82313 H Aerial Tent Complete w 12 3.0

82550 Replacement Clip for B C 10 5.0

82551 Replacement Clip for C C 10 5.0

82554 Replacement Needle Clust 10 5.0

82720 Figure 8 Jacket Slitter 9 5.0

82721 Replacement Blade 9 5.0

82731 Replacement Blades 25/pk 2 5.0

82732 B Web Slitter for .134” 2 5.0

82733 B Web Slitter for .340” 2 5.0

82870 E Pressure Testing Liqui 11 8.0

82871 E Pressure Testing Liqui 11 8.0

82872 E Pressure Testing Liqui 11 8.0

82873 E Pressure Testing Liqui 11 8.0

82875 E Pressure Testing Liqui 11 8.0

83540 D Tarpaulin (122 x 183) 12 5.0

83541 D Tarpaulin (244 x 244) 12 5.0

83542 D Tarpaulin 10 lbs. (4.5 12 5.0

83544 D Tarpaulin 12 5.0

83660 RS Power Reel 6"" (Comp 6 1.0

83662 Spool only 6"" 50 lbs. 6 1.0

83663 Drive spindle and brake 6 1.0

83664 Pole spindle and brake 6 1.0

83665 Reel brake assembly only 6 1.0

83666 Spool only 12"" 72 lbs. 6 1.0

83667 Drive spindle and brake 6 1.0

83668 Pole spindle and brake 6 1.0

83669 RS Power Reel 6 1.0

84453 Quadrant Blocks 3 in. (7 4 7.0

84454 Quadrant Blocks 4 in. (1 4 7.0

84455 Quadrant Blocks 5 in. 4 7.0

84530 Manhole Cover Bolts 3-1/ 5 1.0

84531 Manhole Cover Bolts 1-7/ 5 1.0

84540 Manhole Cover Bolt Wrenc 5 1.0

84850 C Pull Finder w/ Case 2 2.0

85330 D Connecter Presser 7 3.0

86070 Lasher Cable J2 .045” 1 1.0

86071 Lasher Cable J2 .065” 1 1.0

86072 Lasher Cable J2 .045” 1 1.0

P/N Description Section Page

86074 Lasher Cable J2 .045” 1 1.0

86350 E Ladder Support w/33.5” 2 7.0

86351 E Ladder Support w/23.5” 2 7.0

86352 E Ladder Support w/28.5” 2 7.0

86570 Cable Bending Shoe 3 in. 4 9.0

86571 Cable Bending Shoe 4 9.0

87010 Leather Bolt Bag 12 5.0

87052 D Holster Tool Pouch 10 2.0

87071 Cable Cutter 2/0 Copper 9 1.0

87073 Cutter Strand 16 m 17 lb 9 3.0

87074 Cutter Strand Self-Suppo 9 3.0

87111 Ergonomic Scissors 3 oz. 9 2.0

87129 Electrician's Knife 10 1.0

87131 Hawkbill Blade Knife 10 2.0

87141 10 PSI Propane Regulator 11 3.0

87143 Heavy Duty Blower Hose 9 5 4.0

87144 Blower Hose Carrier 16 5 4.0

87145 Pelsue Electric Ventilat 5 4.0

87146 Pelsue Airpac 5 4.0

87154 Ground Tent 4' X 4' 15 l 12 2.0

87156 Ground Tent 6' X 6' 18.5 12 2.0

87158 Ground Tent 8' X 8' 12 2.0

87164 Measuring Wheel 12.5 in. 10 8.0

87166 Metric Measuring Wheel 10 8.0

87187 Measuring Tape 10 8.0

87210 4 in. Overlash Cable B 1 6.0

87229 Fiber Optic Kevlar Cutte 9 2.0

87230 Fiber Optic Stripper 10 7.0

87250 Discharge Hose Female/Ma 5 3.0

87251 Discharge Hose Female/Op 5 3.0

87252 Submersible Pump 60 lbs 5 3.0

87253 Submersible Pump 33 lbs 5 3.0

87254 Submersible Pump Stand 5 3.0

87265 Clip-On Cable Block 1 5.0

87268 1-1/2 Ton Manually Lever 2 1.0

87269 1-1/2 Ton Manually Lever 2 1.0

87278 Safety Cones 10 8.0

87281 Guy Rule 2 2.0

87287 Guy Wire Dispenser 2 3.0

87291 Cable Sheath-Splitting K 8 3.0

87300 Opti-Tray Kit 10 6.0

88222 Detectable Rod 200 ft. 5 6.0

88224 Detectable Rod 300 ft. 5 6.0

88226 Detectable Rod 400 ft. 5 6.0

88228 Detectable Rod 500 ft. 5 6.0

88230 Detectable Rod 600 ft. 5 6.0

88232 Detectable Rod 700 ft. 5 6.0

88234 Detectable Rod 800 ft. 5 6.0

88236 Detectable Rod 900 ft. 5 6.0

88238 Detectable Rod 1000 ft. 5 6.0

88240 Detectable Rod 1100 ft. 5 6.0

P/N Description Section Page

88242 Detectable Rod 1200 ft. 5 6.0

88252 Detectable Rod 200 ft. 5 6.0

88254 Detectable Rod 300 ft. 5 6.0

88256 Detectable Rod 400 ft. 5 6.0

88258 Detectable Rod 500 ft. 5 6.0

88260 Detectable Rod 600 ft. 5 6.0

88262 Detectable Rod 700 ft. 5 6.0

88264 Detectable Rod 800 ft. 5 6.0

88266 Detectable Rod 900 ft. 5 6.0

88268 Detectable Rod 1000 ft. 5 6.0

88272 Detectable Rod 1200 ft. 5 6.0

88280 Receiver Locating 4 lbs. 5 7.0

88281 Transmitter Tx-3 6 lbs. 5 7.0

88282 Bag Carrying Soft .5 oz. 5 7.0

88283 Sonde Super Small M10 En 3 12.0

88284 Transmitter Battery Pack 5 7.0

88285 Sonde Missile 1-1/4 in. 3 12.0

88286 Sonde Missile 1-1/4 in. 3 12.0

88287 Sonde Missile 1-1/2 in. 3 12.0

88288 Sonde Missile 2 in. Duc 3 12.0

88413 Male End Fitting Kit 3/ 5 6.0

88414 Female End Fitting Kit 5 6.0

88415 Male End Fitting Kit 1/ 5 6.0

88416 Female End Fitting Kit 5 6.0

88418 Splice Kit 3/8"" Toneab 5 6.0

88419 Splice Kit 1/2” Toneable 5 6.0

88801 Rope Roller Guide 4.7 lb 4 8.0

88830 Split Main Cable Feeder 4 10.0

88831 Split Ext Cable Feeder 4 10.0

88900 Ramrod 5 8.0

89000 Fiber Cable Blower w/PP 3 1.0

89001 Fiber Cable Blower w/PP 3 1.0

89002 Microfiber Cable Fleeter 3 6.0

89003 Fiber Cable Blower w/o P 3 1.0

89004 Powered Duct Rod Pusher 5 9.0

89005 Powered Duct Rod Pusher 5 9.0

89006 Powered Duct Rod Pusher 5 9.0

89008 Junction Box Multiple* 9 3 3.0

89009 Aftercooler System for C 3 1.0

89010 Breeze Microfiber Blower 3 5.0

89011 Breeze Compressor 3 5.0

89013 Microtube Blower w/ PP 3 1.0

89015 Compressor 4152 lbs. (18 3 1.0

89016 Cable Fleeter 3 1.0

89021 Duct Clamps 1 in. (25) 3 2.0

89022 Duct Seals 1 in. (25) 3 2.0

89033 Duct Clamps 0.75 in. (19 3 2.0

89034 Duct Seals 0.75 in. (19) 3 2.0

89041 Duct Clamps 1.25 in. (32 3 2.0

89042 Duct Seals 1.25 in. (32) 3 2.0

89061 Duct Clamps 1.50 in. (38 3 2.0

Page 25: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com

Product Listing by Part NumberIndex

P/N Description Section Page

89062 Duct Seals 1.50 in. (38) 3 2.0

89066 Junction Box 1.25 in. Du 3 3.0

89067 Junction Box 1.50 in. Du 3 3.0

89071 Duct Clamps 3 2.0

89072 Duct Seals 3 2.0

89074 Fire Retardant Splice Wr 14 1.0

89081 Collets Guides 0.24-0.35 3 2.0

89082 Collets Guides 0.24-0.35 3 2.0

89083 Collets Guides 0.35-0.47 3 2.0

89084 Collets Guides 0.35-0.47 3 2.0

89085 Cable Seals 0.23-0.29 in 3 2.0

89086 Cable Seals 0.29-0.35 in 3 2.0

89087 Cable Seals 0.35-0.41 in 3 2.0

89088 Cable Seals 0.41-0.47 in 3 2.0

89091 Collets Guides 0.47-0.63 3 2.0

89092 Collets Guides 0.63-0.79 3 2.0

89093 Cable Seals 0.47-0.55 in 3 2.0

89094 Cable Seals 0.55-0.63 in 3 2.0

89095 Cable Seals 0.63-0.71 in 3 2.0

89096 Cable Seals 0.71-0.79 in 3 2.0

89101 Collets Guides 0.79-0.95 3 2.0

89102 Collets Guides 0.95-.1.1 3 2.0

89103 Cable Seals 0.79-0.87 in 3 2.0

89104 Cable Seals 0.87-0.95 in 3 2.0

89105 Cable Seals 0.95-1.02 in 3 2.0

89106 Cable Seals 1.02-1.10 in 3 2.0

89107 Collets Guides 3 2.0

89110 Cable Seals 1.10-1.18 in 3 2.0

89111 Cable Seals 1.18-1.26 in 3 2.0

89125 Cable Seal Plugs 0.23-0. 3 2.0

89126 Cable Seal Plugs 0.29-0. 3 2.0

89127 Cable Seal Plugs 0.35-0. 3 2.0

89128 Cable Seal Plugs 0.41-0. 3 2.0

89129 Cable Seal Plugs 0.47-0. 3 2.0

89130 Cable Seal Plugs 0.55-0. 3 2.0

89131 Cable Seal Plugs 0.63-0. 3 2.0

89132 Cable Seal Plugs 0.71-0. 3 2.0

89133 Cable Seal Plugs 0.79-0. 3 2.0

89134 Cable Seal Plugs 0.87-0. 3 2.0

89135 Cable Seal Plugs 0.95-1. 3 2.0

89136 Cable Seal Plugs 1.02-1. 3 2.0

89141 Polywater Duct Prelube 2 3 3.0

89162 Cable Seal Plugs 1.10-1. 3 2.0

89164 Cable Seal Plugs 1.18-1. 3 2.0

89168 Storage Box One Set: Co 3 3.0

89199 Polywater Duct Prelube 3 3.0

89202 Duct Rodder 100 ft. (30) 5 5.0

89204 Duct Rodder 200 ft. (61) 5 5.0

89206 Duct Rodder 300 ft. (91) 5 5.0

89208 Duct Rodder 400 ft. (122 5 5.0

89210 Duct Rodder 500 ft. (152 5 5.0

P/N Description Section Page

89222 Duct Rodder 200 ft. (61) 5 5.0

89224 Duct Rodder 300 ft. (91) 5 5.0

89226 Duct Rodder 400 ft. (122 5 5.0

89228 Duct Rodder 500 ft. (152 5 5.0

89230 Duct Rodder 600 ft. (183 5 5.0

89232 Duct Rodder 700 ft. (213 5 5.0

89234 Duct Rodder 800 ft. (244 5 5.0

89236 Duct Rodder 900 ft. (274 5 5.0

89238 Duct Rodder 1000 ft. (30 5 5.0

89240 Duct Rodder 1100 ft. (33 5 5.0

89242 Duct Rodder 1200 ft. (36 5 5.0

89243 Duct Rodder 1300 ft. (39 5 5.0

89244 Duct Rodder 1400 ft. (42 5 5.0

89245 Duct Rodder 1500 ft. (45 5 5.0

89246 Duct Rodder 1600 ft. (48 5 5.0

89247 Duct Rodder 1700 ft. (51 5 5.0

89248 Duct Rodder 1800 ft. (54 5 5.0

89249 Duct Rodder 2000 ft. (61 5 5.0

89252 Duct Rodder 200 ft. (61) 5 5.0

89254 Duct Rodder 300 ft. (91) 5 5.0

89256 Duct Rodder 400 ft. (122 5 5.0

89258 Duct Rodder 500 ft. (152 5 5.0

89260 Duct Rodder 600 ft. (183 5 5.0

89262 Duct Rodder 700 ft. (213 5 5.0

89264 Duct Rodder 800 ft. (244 5 5.0

89266 Duct Rodder 900 ft. (274 5 5.0

89268 Duct Rodder 1000 ft. (30 5 5.0

89270 Duct Rodder 1100 ft. (33 5 5.0

89270 Detectable Rod 1100 ft. 5 6.0

89272 Duct Rodder 1200 ft. (36 5 5.0

89300 AirStream w/Power Supply 3 4.0

89302 AirStream Generator 3 4.0

89304 Cable Guide Assembly 3 4.0

89306 Cable Guide Assembly 2.5 3 4.0

89307 Cable Guide Assembly 3.0 3 4.0

89310 Tube Collet Assembly 5 3 4.0

89311 Tube Collet Assembly 7 3 4.0

89312 Tube Collet Assembly 8 3 4.0

89313 Tube Collet Assembly 10 3 4.0

89314 Tube Collet Assembly 12 3 4.0

89315 Tube Collet Assembly 12. 3 4.0

89316 Tube Collet Assembly 14 3 4.0

89317 Tube Collet Assembly 16 3 4.0

89318 Tube Collet Assembly 3 4.0

89319 Tube Collet Assembly 8.5 3 4.0

89350 Tapered Head 1/4 in. (6. 5 5.0

89352 Tapered Head 3/8 in. (9) 5 5.0

89360 Roller Guide 3/8 in. (9) 5 5.0

89365 Duct Rodder 3/8""X 100' 5 8.0

89370 Flexible Leader 3/8 in.( 5 5.0

89371 Flexible Leader 1/4 in. 5 5.0

P/N Description Section Page

89373 Cable Seal Assembly 3 4.0

89374 Cable Seal Assembly 2.5- 3 4.0

89375 Cable Seal Assembly 3.0- 3 4.0

89376 Cable Seal Assembly 3.8- 3 4.0

89377 Cable Seal Assembly 5.0- 3 4.0

89378 Cable Seal Assembly 6.4- 3 4.0

89379 Cable Seal Assembly 8.0- 3 4.0

89380 Swivel Coupling 1/4 in. 5 5.0

89381 Coupling Swivel 5 7.0

89382 Swivel Coupling 5 5.0

89383 Duct To Duct Clamp 8.5 l 5 9.0

89384 Sonde Adapter Male 1/4 X 5 7.0

89386 Rod Grapple Adaptor 5 8.0

89387 Inner Duct Attachment To 5 9.0

89394 Sonde Adapter Female 5 7.0

89396 Sonde Missile 1 in. Duc 3 12.0

89411 Fitting Repair Kit Male 5 5.0

89412 Fitting Repair Kit Femal 5 5.0

89413 Fitting Repair Kit Male 5 5.0

89414 Fitting Repair Kit Femal 5 5.0

89415 Fitting Repair Kit Male 5 5.0

89416 Fitting Repair Kit Femal 5 5.0

89417 Splice Repair Kit 1/4 in 5 5.0

89418 Splice Repair Kit 3/8 in 5 5.0

89419 Splice Repair Kit 1/2 in 5 5.0

89424 1/4 in. Std. rod Kit wit 5 5.0

89425 3/8 in. Std. rod Kit wit 5 5.0

89426 1/2 in. Std. rod Kit wit 5 5.0

89503 Cable Guide Assembly 6.0 3 4.0

89509 Spare Seal 2.0 - 2.5 3 7.0

89510 Spare Seal 2.5 - 3.0 3 7.0

89511 Spare Seal 3.0 - 3.8 3 7.0

89512 Spare Seal 3.8 - 5.0 3 7.0

89513 Spare Seal 5.0 - 6.4 3 7.0

89514 Spare Seal 3 7.0

89520 Cable Guide 2.5-3.8 3 5.0

89521 Cable Guide 3 5.0

89530 Collet Assy 2.5-3.0 3 5.0

89531 Collet Assy 3.0-3.8 3 5.0

89532 Collet Assy 3.8-5.0 3 5.0

89533 Collet Assy 5.0-6.4 3 5.0

89534 Collet Assy 6.4-8.0 3 5.0

89535 Collet Assy 3 5.0

89536 Tube Collet Assy 3 5.0

89537 Tube Collet Assy 8.5 3 5.0

89538 Tube Collet Assy 14 3 5.0

89539 Tube Collet Assy 5 3 5.0

89540 Tube Collet Assy 8 3 5.0

89541 Tube Collet Assy 10 3 5.0

89542 Tube Collet Assy 12 3 5.0

89543 Tube Collet Assy 12.7 3 5.0

Page 26: WINCHES & FLEET ACCESSORIES

General Machine Products Company, Inc. • 3111 Old Lincoln Highway, Trevose, PA 19053 USATel: +1.215.357.5500 • Fax: +1.215.357.6216 • Email: [email protected] • Web: www.GMPtools.com

Product Listing by Part NumberIndex

P/N Description Section Page

89544 Tube Collet Assy 16 3 5.0

89545 Tube Collet Assy 4 3 5.0

89546 Tube Collet Assy 6 3 5.0

89547 Tube Collet Assy 7 3 5.0

89549 Spare O Ring 5 3 7.0

89550 Spare O Ring 8 - 8.5 3 7.0

89551 Spare O Ring 10 3 7.0

89552 Spare O Ring 12 - 12.7 3 7.0

89556 Spare O Ring 4 3 7.0

89558 Spare O Ring 3 7.0

89565 Micro Duct Cutter .75 in 3 8.0

89568 Polywater Duct Prelube 3 6.0

89592 Breeze Blown Fiber Kit 3 6.0

89600 Electric Capstan Hoist 2 8.0

89610 Electric Capstan Hoist C 2 8.0

89620 Steel Storage Box Only 3 2 8.0

89620 Electric Capstan Hoist S 13 5.0

89621 Rope Lock Device 2 lbs ( 2 8.0

89621 Electric Capstan Hoist R 13 5.0

89622 Universal Bracket 26 lbs 2 8.0

89622 Electric Capstan Hoist U 13 5.0

89692 Metal Drive Wheel Kit 3 6.0

89742 Bottled Nitrogen Kit 3 8.0

89743 Breeze Nitrogen Bottle K 3 6.0

89760 Cable Pusher for 1.25 - 4 11.0

89761 Valve Control Module w/ 4 11.0

89762 “V” Frame Guide Set 43 l 4 11.0

89763 Trench Feed Rollers in S 4 11.0

89764 Hoop Roller in Aluminum 4 11.0

89765 Trench Feed Rollers in A 4 11.0

89766 Heavy Duty Cable Roller 4 11.0

89767 Triple Corner Rollers 26 4 11.0

89768 Trench Feed Lead Roller 4 11.0

89801 Seal-off Valve Control 3 10.0

89804 Duct Seal-off 1 in. (25) 3 10.0

89805 Duct Seal-off 1.25 in. ( 3 10.0

89806 Duct Seal-off 1.5 in. (3 3 10.0

89807 Duct Seal-off 2 in. (51) 3 10.0

89808 Conduit Seal-Off 2 in. ( 3 11.0

89809 Conduit Seal-Off 3 in. ( 3 11.0

89810 Conduit Seal-Off 3.5 in. 3 11.0

89811 Conduit Seal-Off 4 in. ( 3 11.0

89812 Conduit Seal-Off 4.5 in. 3 11.0

89813 Conduit Seal-Off 5 in. ( 3 11.0

89815 Blow Gun Kit 1.25 in. (3 3 11.0

89816 Blow Gun Kit 4 in. 3 11.0

89820 Optional Carry Case 3 11.0

89830 Parachute for 1 in. (25) 3 8.0

89831 Parachute for 1.25 in. ( 3 8.0

89832 Parachute for 1.5 in. (3 3 8.0

89833 Parachute for 2 in. (51) 3 8.0

P/N Description Section Page

89840 Storage Case: Complete O 3 3.0

89910 Whisper Cable Blower 3 7.0

89918 Collet Assy 4 3 7.0

89919 Collet Assy 5 3 7.0

89920 Collet Assy 8.5 3 7.0

89921 Collet Assy 12.7 3 7.0

89922 Collet Assy 10 3 7.0

89923 Collet Assy 12 3 7.0

89924 Collet Assy 3 7.0

89930 Seal Assy 2.0 - 2.5 3 7.0

89931 Seal Assy 2.5 - 3.0 3 7.0

89932 Seal Assy 3.0 - 3.8 3 7.0

89933 Seal Assy 3.8 - 5.0 3 7.0

89934 Seal Assy 5.0 - 6.4 3 7.0

89935 Seal Assy 3 7.0

89945 Tripod Mount Kit 3 7.0

89947 Mounting Plate 3 8.0

89948 Drill Stand 3 7.0

91604 3-Roller OH Cable Guid 1 9.0

91605 3-Roller OH Cable Guid 1 9.0

91606 3-Roller OH Cab le Gui 1 9.0

P/N Description Section Page