Embed Size (px)
DESCRIPTION
What is Polaris (Laser+RF)? The Polaris WR System is intended to treat wrinkles and improve skin color evenness. How does it work? The system technology is a combination of optical (laser) energy and conducted radio frequency (RF). Both of these energies supplement each other to provide epidermal and dermal thermolysis at controlled depth. The System provides individual adjustment of RF energy and LASER energy to achieve maximum efficiency and safety for each patient. Is it safe? The system provides better safety and comfort while minimizing possible side effects, using a contact cooling mechanism in the applicator and “on-line” energy monitoring of the tissue during treatment. What are the preparations before the treatment? Listen to treatment arrangement, typical treatment results and possible adverse effects and discomfort given by your physician Follow the safety warning instructions from your physician What are the after treatment care? It is recommended that a cold pack be applied to the treated area immediately after treatment. During the first five days following the treatment, care should be taken to prevent trauma to the treated area. In addition you should avoid hot baths, massages, exercising, etc. You will be advised to use high factor sunscreen and protect the treated area from sunlight for at least one month after the treatment. Tanning after treatment may cause hyperpigmentation. Follow-up You should return 4-8 weeks after the treatment for evaluation of the treatment site. Interval between treatments should be longer than two weeks. If no results were observed and adverse effects noticed, then treatment should be stopped. Treatment should be stopped when you or your physician are satisfied with the results.
Citation preview
Polaris WRPolaris WRPolaris LVPolaris LV
Dr. P. Tracy
PolarisPolaris
• Based on ELOS technology– Conducted RF
– High power diode laser
– Effective cooling
• Multiple applications– Wrinkle and skin texture
treatment (WR)
– Leg vein treatment (LV)
Polaris Pulse SequencePolaris Pulse Sequence
Polaris WRPolaris WR
• Superposition of RF and light creates strong heating of deep dermis with minimal risk of side effects
Creating hot spot with Creating hot spot with Polaris WRPolaris WR
Cooling
Conducted RF
Light
Hot spot
Polaris WRPolaris WR- -
Ablative skin resurfacing
Non-ablative skin resurfacing
Matrix skin renewal
Ablation of epidermis and heating the upper dermis
Cooling of epidermis and weak heating the dermis
Cooling of epidermis and Strong heating the dermis
in matrix way
WR Applicator designWR Applicator design
• Electrode design allows high energy delivery to a depth of 2.5mm
• Light energy is absorbed by micro-vascularities creating heat which focuses the RF at the center of the target tissue
Polaris WRPolaris WR
• High power conductive RF – Energy - up to 100J/cm3
• Unique diode laser– Wavelength - 900nm – Fluence - up to 50J/cm2
• Effective cooling – Temperature - 2oC
WR mechanism of collagen WR mechanism of collagen remodeling - preremodeling - pre
• Collagen is normally densely packed and relatively inactive in mature skin.
• Interfibrillar spacing this compact limits blood supply to the area inhibiting the formation of new fibres
WR mechanism of collagen WR mechanism of collagen remodelling – immediately postremodelling – immediately post
• The WR treatment creates a deep oedema. This swelling allows lymphatic and vascular drainage in the dermis.
• Intrafibrillar spacing is increased .• Fibres are separated and oriented chaotically• Oedema and erythema appear on the skin surface
WR mechanism of collagen WR mechanism of collagen remodelling – remodelling – 3 weeks post treatment3 weeks post treatment
• After oedema has resolved, the collagen maintains the intrafibrillar spacing.• Collagen neogenesis stimulated by WR treatment fills the spaces with new fibres,
resulting in dermal remodelling.• Seen clinically as “tightening” and deep wrinkle reduction.
Dr. A. Del Giglio, Italy
Dr. M. Kulick, CA, USA
Dr. M. Kulick, CA, USA
Dr. M. Kulick, CA, USA
Dr. M. Kulik, CA, USA
Photo courtesy - Hidemi Akai, MD, Japan, Face contouring
Dr. Mihata, Japan, treatment of acne scars
Dr. Mihata, Japan, treatment of acne scars
Polaris LV– Vascular TreatmentsPolaris LV– Vascular Treatments
• Polaris LV (leg veins).
• Effective for all colours of leg veins up to 5mm diameter.
• Low treatment pain levels.
• No late burning.
Polaris LVPolaris LV
• Concentrated conductive RF – Energy - up to 100 J/cm3
• High power diode laser– Wavelength - 900nm – Fluence - up to 140J/cm2
• Effective cooling – Temperature - 2oC
Main requirements to leg vein Main requirements to leg vein treatmenttreatment
• High energy penetration depth (>2mm).
• High energy density on treated vein (>100J/cm2).
• Strong absorption of energy by haemoglobin.
• Epidermal cooling.
LV Applicator designLV Applicator design
• Electrode design: – allows high energy
delivery to the deep dermis.
• Light energy:– generated at the peak
of haemoglobin absorption.
Light absorption by Light absorption by haemoglobinhaemoglobin
Polaris LV – working principlesPolaris LV – working principles
1. Place probe on skin over vessel.
2. Light is selectively absorbed by blood.
3. RF goes through the pre-heated vessel
4. RF and light combination creates coagulation of vessel wall
![Technical Bulletin - Polaris - Polaris 9300 Sport & Polaris 9300xi Sport[1]](https://img.pdfslide.net/doc/110x75/553b235d4a7959d8258b463f/technical-bulletin-polaris-polaris-9300-sport-polaris-9300xi-sport1.jpg)
