Upload
susanna-logan
View
219
Download
0
Tags:
Embed Size (px)
Citation preview
© 2012 Autodesk #AU2012
MA5956-V: Module 1How to Drive Autodesk Inventor with the Top DownPaul MunfordCAD/CAM Manager Halstock cabinet makers
© 2012 Autodesk #AU2012
Class Summary
In this class you will learn how to create reliable predictable, parametric assembly models using Autodesk Inventor’s ‘Alternative’ modeling techniques.
Module 1: Learning objectives Module 2: Assembly modeling techniques explained Module 3: Advanced derived modeling techniques Module 4: Derived modeling workflow tips Module 5: Summary and Conclusion
© 2012 Autodesk #AU2012
Who am I?
• Paul Munford
• CAD/CAM Manager Halstock cabinet makers UK
• ‘Setter out’ – Specialist woodworking Draftsman
• CAD Geek
Who are you?
© 2012 Autodesk #AU2012
• You heard about Inventor
• You bought into Inventor
• You trained with Inventor
• You struggle with Inventor
This class is for you
© 2012 Autodesk #AU2012
Learning Objectives
At the end of this class, you will be able to:
• Identify the differences between Bottom Up, Top Down and In Place modelling techniques.
• Communicate the benefits of using derived assembly techniques, over the ‘standard’ constraint based assembly technique.
• Understand how to choose which technique (or combination of techniques) to use on your project.
• Understand how to use ‘alternative’ assembly techniques to build constraint free Assembly models.
© 2012 Autodesk #AU2012Autodesk Inventor® is a registered trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.
Next: Module 2 Assembly modeling techniques explained
© 2012 Autodesk #AU2012
MA5956-V: Module 2Assembly modeling techniques explainedPaul MunfordCAD/CAM Manager Halstock cabinet makers
© 2012 Autodesk #AU2012
Before you can model your designyou must design your model
Design Intent
We want assembly models that are:Quick to buildReliablePredictableEasy and quick to edit
© 2012 Autodesk #AU2012
Bottom up(Traditional)
In place(Adaptive)
Top Down(Derived)
Assembly modeling techniques
© 2012 Autodesk #AU2012
Bottom up
Let’s try it…
© 2012 Autodesk #AU2012
Cons:• No relationships between parts• Not easy to build or edit large assemblies
Pros:• No relationships to manage between parts• Easy to create your BOM/Parts list
Bottom up (Traditional)
© 2012 Autodesk #AU2012
In Place
Let’s try it…
© 2012 Autodesk #AU2012
Cons:• Adaptive references can be tricky to manage• Not easy to build or edit large assemblies
Pros:• Works with surfaces & neutral format parts• Quick to build – great for goal finding
In Place (Adaptive)
© 2012 Autodesk #AU2012
Let’s try it…
Top Down: Skeletal modeling
© 2012 Autodesk #AU2012
Cons:•Working with just the geometry is not very intuitive•Building part models can be time consuming•Building parts without context = lots to coordinate Pros:•The derived parts are very lightweight•Assemblies can quickly be laid out in 2D to see how they function before time is invested in 3D modeling.
Top Down: Skeletal modeling
© 2012 Autodesk #AU2012Autodesk Inventor® is a registered trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.
Next: Module 3 Advanced derived assembly model techniques
© 2012 Autodesk #AU2012
MA5956-V: Module 3Advanced derived assembly model techniquesPaul MunfordCAD/CAM Manager Halstock cabinet makers
© 2012 Autodesk #AU2012
Bottom up(Traditional)
In place(Adaptive)
Top Down(Derived)
Assembly modeling techniques
© 2012 Autodesk #AU2012
Let’s try it…
Top Down: Sketch block layouts
© 2012 Autodesk #AU2012
Cons:•Working with just the geometry is not very intuitive•Building part models can be time consuming•Building parts without context = lots to coordinate Pros:•The derived parts are very lightweight•Assemblies can quickly be laid out in 2D to see how they function before time is invested in 3D modeling.
Top Down: Sketch block layouts
© 2012 Autodesk #AU2012
Let’s try it…
Top Down: Multi body design parts
© 2012 Autodesk #AU2012
Cons:• Must be built in a structured manner – design
intent• Lots of relationships between parts to manage
Pros:• Quick and easy to design complex models• Quick and easy to make parametric edits
Top Down: Multi body design parts
© 2012 Autodesk #AU2012
Let’s try it…
The Hybrid approach
© 2012 Autodesk #AU2012
Cons:•Your whole team needs to work in a structured and methodical manner
Pros:•The workload can be shared across the whole department
The Hybrid approach
© 2012 Autodesk #AU2012Autodesk Inventor® is a registered trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.
Next: Module 4 Derived assembly modeling workflow tips
© 2012 Autodesk #AU2012
MA5956-V: Module 4Derived assembly modeling workflow tipsPaul MunfordCAD/CAM Manager Halstock cabinet makers
© 2012 Autodesk #AU2012
Modeling Workflow tips
• Plan your assembly (Design intent)• Add your known parameters• Create sketch blocks• Create work features as required• Create geometry to define your design• Name your geometry• Derive geometry out – if appropriate• Model the 3D features/solids• Derive your solids out into assemblies
© 2012 Autodesk #AU2012
Assembly Workflow tips
• Don’t go Multibody mad• Use feature based parametric design sparingly• Keep it simple• Use Inventor for what it’s good at• Faster updates
© 2012 Autodesk #AU2012Autodesk Inventor® is a registered trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.
Next: Module 5 …In conclusion
© 2012 Autodesk #AU2012
MA5956-V: Module 5In conclusionPaul MunfordCAD/CAM Manager Halstock cabinet makers
© 2012 Autodesk #AU2012
Summary
You can now create predictable, reliable assembly models with Autodesk Inventor
You know how to model in a structured manner and when to keep it simple
You now know how to use derived modelling techniques to collaborate with your colleagues
So Get on with it!
© 2012 Autodesk #AU2012Autodesk Inventor® is a registered trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.
THANK YOU
Email: [email protected]: @CadsetteroutBlog: Cadsetterout.comWeb: Halstock.com
© 2012 Autodesk #AU2012Autodesk Inventor® is a registered trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.
Next: Bonus Module 6Running the iLogic code examples
© 2012 Autodesk #AU2012
MA5956-V: Module 6Running the iLogic code examplesPaul MunfordCAD/CAM Manager Halstock cabinet makers
© 2012 Autodesk #AU2012Autodesk Inventor® is a registered trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.
THANK YOU
Email: [email protected]: @CadsetteroutBlog: Cadsetterout.comWeb: Halstock.com