Design For Manufacturability Darren Wurmnest, Justin Yang, Lewis Lai. Design For Manufacturability Darren Wurmnest, Justin Yang, Lewis Lai. Design for

Design For Manufacturability

Darren Wurmnest, Justin Yang, Lewis Lai.

Design for ManufacturabilityDesign for Manufacturability可制造性设计可制造性设计System Thinking

系统思维Functional Relationships

功能关系Relationship Framework

关系基础Establishing the Connection

建立连接Connection Functionality

连接功能Design For Manufacturability




System RelationshipsSystem Relationships系统关系系统关系



Boss Diameter to Hole DiameterBoss Diameter to Hole Diameter轴径到孔径轴径到孔径Shoulder

Bearing轴肩支架

Shoulder Plate轴承垫板



Belleville Washer垫圈

Boss Diameter to Hole DiameterBoss Diameter to Hole Diameter轴径到孔径轴径到孔径



Clutch Plate Shield控制面板保护

Boss Diameter to Hole Boss Diameter to Hole DiameterDiameter轴径到孔径轴径到孔径



Clutch Plate Shield 2控制面板保护 2







Torso Bent 轴径的主体




Top Screw HoleTop Screw Hole上端螺孔上端螺孔

Shoulder Plate轴承垫板

Shoulder Bearing轴肩支架



4 Screw Hole Patter4 Screw Hole Patter四螺孔模四螺孔模



4 Screw Hole Pattern4 Screw Hole Pattern四螺孔模四螺孔模

Shoulder Bearing轴肩支架

Shoulder Bearing

Intersected轴肩支架交叉



Width and HeigthWidth and Heigth宽度和高度宽度和高度



Width and DepthWidth and Depth宽度和深度宽度和深度

Shoulder Bearing

Intersected轴肩支架交叉



4 Legs and Slots4 Legs and Slots四脚和卡槽四脚和卡槽

Clutch Plate Shield控制面板保护



Snap RingSnap Ring卡环卡环

Snap Ring卡环




Gear轮



Height and WidthHeight and Width高度和宽度高度和宽度

Arm Bushing轴臂

Bearing Plate支架面板



8 Screw Hole Pattern8 Screw Hole Pattern八螺孔模八螺孔模






Slot and NotchSlot and Notch卡槽和凹槽卡槽和凹槽



Shaft Diameter to Hole Shaft Diameter to Hole DiameterDiameter轴径和孔径轴径和孔径



Turning RadiusTurning Radius旋转半径旋转半径



Slot and NotchSlot and Notch卡槽和凹槽卡槽和凹槽



3 Screw Hole Pattern3 Screw Hole Pattern三螺孔模三螺孔模



Two Screw Hole PatternTwo Screw Hole Pattern两螺孔模两螺孔模

Documents

Design For Manufacturability Darren Wurmnest, Justin Yang, Lewis Lai. Design For Manufacturability Darren Wurmnest, Justin Yang, Lewis Lai. Design for