Hydroarbon Suspension Technology - FRSA · Hydroarbon Suspension Technology The ltimate Fire uencher ed. firefighting equipment - portable 1300 4 RESCUE (737283) firefighting equipment

Fire Fighting Equipment PORTABLERCR - Road Crash RescueFire Fighting Equipment PORTABLE

2 www.frsa.com.au ©Copyright Fire Rescue Safety Australia

Hydrocarbon Suspension Technology

The Ultimate Fire Quencher

LASTFIRE Certified

firefighting equipment - portable

firefig

hting

equ

ipm

ent

1300 4 RESCUE (737283) www.frsa.com.au

About FRSA Fire Rescue Safety Australia (FRSA) is an organisation that runs parallel to those who strategically manage our emergency services. We are professional equipment suppliers and service agents who provide expertise in equipment selection to ensure the myriad of products available today are in fact fit for purpose.

We pride ourselves in being a partner whom you can trust to provide the right advice and support in all areas of emergency management including various special hazards encountered in the workplace.

Our team of professionals all have strong backgrounds and expertise in the industry. We feel it’s absolutely vital to provide you people who have been trained and have experience in what is often difficult and challenging work.

Our holistic “One Source” capability provides customers the opportunity to streamline their procurements channels, reduce risk and gain productivity all through one company who can take care of your business and compliance requirements. Simply put FRSA has three core business units. These are;

Technology Our capability to provide you the latest technology across all disciplines of emergency management. Quality products backed by superior technical support and advice. Whether its firefighting PPE, breathing apparatus, road crash rescue equipment or even fire and rescue vehicles we can design a solution to suit your needs.

Asset Management Our capability to maintain and repair your emergency response assets. We offer these services for all your critical assets backed by a 24/7 emergency breakdown service. “Anytime Anywhere” We will be there. FRSA offers a fully managed service where all assets along with service history are kept on our database. With a full reporting capability we can provide complete up to date data to you at any time.

Where you see this symbol it denotes that item is servicable by FRSA Technical Services division.

Solutions Our capability to provide tailored supply and service packages is what separates FRSA from our competition. We also provide additional services in the areas of consultancy, training and education. Our goal is simple, to provide a complete solution to our clients, one that is a true partnership, one that is highly valued.

We are committed to serving the industry we are passionate and proud to be a part of. Our team is guided by one simple ethos “anytime anywhere”. It’s a “whatever it takes” attitude that ensures our number one priority is always you.

Contact

Please feel free to contact your local FRSA representative for further information and assistance.

FRSA Company Values Integrity • Passion • Innovation • Accountability • Team Work


Sidewinder® EXM

EXTREME ENVIRONMENTS. EXTREME SOLUTIONS.


firefig

hting

equ

ipm

ent

CONTENTS

• Page 6-8 Branches

• Page 9 Foam Tube / Inductors

• Page 10-12 Firefighting Foam

• Page 13 Foam Generators

• Page 14-15 CAFS Systems

• Page 16-21 Foam Equipment

• Page 22-24 Monitors

• Page 25 Hero Pipe

• Page 26-27 Hoses

• Page 28 Couplings

• Page 29 Accessories

• Page 30 Depots

• Page 32 PPV fans

• Page 33-34 Pumps

• Page 35 Water Storage

• Page 36-37 Extinguishers

• Page 38-39 Ancilliary

• Page 40-43 Lighting & Torches

• Page 44-45 Fire Tools

• Page 46 Reels

• Page 47 Smoke Machines

• Page 48-49 Foxfire illumination


Elkhart Chief

Fixed flow Chief™ nozzles efficiently deliver a constant gallonage from straight stream to full fog. The simple rugged design makes the Chief™ easy to use, train with and reliable in tough situations. Superior hydraulics due to a fully machined waterway result in excellent stream quality and reach. The Chief™ is also available in true low pressure versions with specifically engineered, calibrated

and labeled stems down to 50 psi. With more than 300 available variations the Chief™ is easily customized to meet your specific needs.

Features include:

• Aluminum / Bronze shut-off handle with double stops

• 100 psi, 75 psi or 50 psi models

• Durable color selectable urethane bumper

• Can be field retrofitted to optional flows and pressures

• Standard spinning teeth, or optional molded urethane teeth

• Available pistol grip made from Elk-O-Lite®

• 184 GPM at 50 psi in water setting

• Flush without shut-off

Elkhart Phantom The selectable gallonage Phantom® lets the firefighter select the appropriate flow. The wide selection range standard with the Phantom® makes it one nozzle for every use from brush to interior attack. The Phantom® is designed for reliable with rugged metal selector ring and dual drive metal ball shut-off. Available standard in 100 psi and true 75 psi models.

Features include:

• Aluminum / Bronze shut-off with double stops

• 100 and 75 psi

• Metal selector ring

• Flush without shut-off


• Dual drives

• 1”, 1.5” rigid, swivel, or free swivel base

• Spinning teeth

Nozzles & Branches


firefig

hting

equ

ipm

ent

Elkhart Select-o-Flow

Select-O-Flow®, the original selectable gallonage nozzle, is similar in function to the Phantom® — allowing the firefighter to select the appropriate flow. The Select-O-Flow® range goes as high as 250 gpm.

Features include:

• Metal shut-off

• Locking flow selector ring

• Heavy duty rubber bumper

• High flow range

• Flush without shutting down

• Available pistol grip, rugged cast brass construction with rough chrome finish

Elkhart Marine

These handline nozzles are specifically designed and manufactured for the unique firefighting challenges of a marine environment. They utilize military spec, corrosion resistant cast brass construction and are ideal for the application of AFFF. The constant flow technology, combined with their durable construction, make them optimal for use in the shipping industry, in refineries and for off-shore drilling or production rigs, as well as within chemical complexes.

Most models meet the stringent performance requirements of either the U.S. Navy or the U.S. Coast Guard.

Features include:

• Manganese/Bronze horseshoe handle

• Acetal ball with self-adjusting UHMWPE seat (most models)

• Cut metal teeth

• Available pistol grip is 85-5-5-5 brass

• 85-5-5-5 “Marine Brass” construction

• Flush without shutting down

Elkhart Industrial & Electrical Fog

Our industrial fog nozzles were created to handle the rigors of industrial needs in refineries, chemical plants, office complexes and other on-site situations. Several different materials are available to suit every need, and most nozzles are U.L. listed.

The fog nozzles with the electrical specification in the chart are designed to be used on class “C” hazards and utilize only fog capabilities in combating blazes at 10’ or more from live electrical

equipment and/or circuits with voltage up to 250,000. All other industrial fog nozzles can be used in either straight stream or fog combinations.

Nozzles & Branches


Elkhart Handline Nozzles

Innovative new products, an impressive list of safety features and a record of uncompromised quality and reliability make Elkhart nozzles the industry standard for firefighting nozzles

Flex AttackA nozzle that lets you go from CAF to H20 with a click of the tip. From the wet CAF attack setting, click left for a big open waterway and dry foam or click right for a tight 15/16” water only smooth bore. The patented, unobstructed variable orifice waterway won’t strip CAF bubbles.

• Free swivel inlet

• Hard anodized, Teflon® impregnated aluminum alloy body and pistol grip

• Aluminum/bronze shut-off handle

• Zytel® ST801 polyamide center barrel

• Ultra high molecular weight polyethylene shut-off seats

• 70A urethane compressible bore

• 184 GPM at 50 psi in water setting

• Maximum operating pressure 200 psi

Elkhart Solid Strike

The Solid Strike™ offers unsurpassed flow performance with flexibility that allows the nozzleman to vary GPM or reach without shutting down to change tip size. Unlike a traditional smooth bore tip, the Solid Strike™ utilizes the hydraulic forces of the water flow itself to converge and project a perfect solid stream of water at near identical exit velocity — maximizing the stable range of the stream. The Solid Strike™ operates like any traditional smooth bore tip on a shut-off, except that the nozzleman has the ability to vary the effective tip size under flow.

• Dual construction free swivel/swivel for superior inlet movement and rotation

• Hard anodized, Teflon® impregnated aluminum alloy body and pistol grip

• Aluminum/bronze shut-off handle

• Delrin® adjustable hydrofoil



Nozzles & Branches


firefig

hting

equ

ipm

ent

Short

CONFIGURATIONS

Long

Elkhart Foam Expansion Tubes

When greater expansion rates of foam solution are needed, a foam aeration tube can be quickly attached to many of Elkhart Brass combination fog nozzles. All tubes are Elk-O-Lite® cast fifinish with a nylon cord wrap.

Foam Expansion Tube Details

"52.03"52.03"05.04"78.51"78.51htgneLWeight (Lbs.) 3.80 3.80 4.50 4.75 4.75Built-In Hydroverter • •

22311erugiF

Foam Tubes & Eductors

Elkhart offers an eductor for all handlines (1” through 21/2”) and the eductors are compatible with most foam concentrates. All Elkhart’s eductors:

• Are easy hook-up / easy set-up

• Feature red urethane enamel finish

• Can be deployed in any position

• Offer a removable pick-up screen and removable metering valve

• Come with a clear PVC pick-up hose

Foam Eductors-Portable

BRASS BY-PASS INLINE EDUCTOR

BRASS INLINE EDUCTOR

COMPOSITE INLINE EDUCTOR


FireAde 2000

FireAde 2000 is a NEW TECHNOLOGY, MULTI FEATURED Fire Fighting and Control Medium that combines the benefits of 6 different chemical technologies - ALL IN ONE PRODUCT.

Use FireAde 2000 as a:Fire Fighting MediumCooling MediumHazardous Spill Control MediumToxic Smoke ScrubberVapour Control MediumBioremediation MediumNew Generation Chemical

FireAde 2000 is nothing short of a revolution. It has been designed and formulated for modern day fire fighting applications and equipment whilst it also addresses many 21st Century problems related to the environment and the new complex combustible materials. FireAde 2000 is:Non-HazardousNon-ToxicNon-Corrosive BiodegradableEnvironmentally FriendlyEasy To Store And TransportHas Unlimited Shelf LifeCost-Effective When Measured By Any Meaningful Criteria

Over 20 years of in-house and independent research and testing has led to the refinement of a truly versatile product which has been proven unequivocally to be the most advanced fire suppression technology available today.

- UL/UCL Listed Foam Liquid Concentrate (UL 162,NFPA 11, NFPA 16)

- UL/ULC Classified Wetting Agent (NFPA 18-2006)

- MPA Dresden EN 1568-3: 2008

- ICAO Level B (International Civil Aviation Organization)

FSP Care About the Environment

Today, there is increased awareness and concerns regarding the environmental footprint firefighting foams create. Fire Service Plus uses water based and food grade ingredients to protect the integrity of the environment. Our innovative technology branches away from the traditional firefighting foam agent chemistry thus creating FireAde2000 the most environmentally friendly, non-toxic, and non-corrosive firefighting foam agent ever produced.

Simplification

Our introduction of FireAde2000, the first “true” Class A Wetting Agent (NFPA 18-2006) and Class B Foam Liquid Concentrate (UL 162 NFPA 11 and 16), has simplified the firefighting foam industry. FireAde 2000 enables Fire Departments and industries to increase levels of safety and efficiency, while reducing overall costs.

Toxicological Information

Acute Toxicity: The product may cause eye and slight skin irritations, and nausea and diarrhea if large amounts are swallowed. No toxic effects are to be expected if industrial hygiene standards are maintained

Acute Oral Toxicity: LD 50 (rat, oral); >2000mg/kg

Acute Inhalative toxicity: No Data

Sensitization: No sensing effect known

Fish Toxicity: ECO: 20g/l/48h, EC50: 40mg/l/48h

Ecotoxic Effects: Biodegradable, no adverse effects to sewage plants are to be expected

Ecotoxic data for 3% aqueous solution:

Fish Toxicity: LC50: 1330 mg/l

Daphnia Toxicity: EC50: 26,000 mg/l/48h

Algael Toxicity: EC50 63,390mg/l/72h | EC20 18,830mg/I/72h | EC10 9950mg/I/72h

COD 3%: 9680mg 02/l

BOD 3%: 1920mg 02/l

Firefighting Foam


firefig

hting

equ

ipm

ent

Physical PropertiesAppearance Physical state: Liquid Color: Transparent, Slightly red. Odor: Faint Pleasant odorRelevant data for Safety and Health for the product (concentrate): Melting point/range: 1C Boiling point/range: 127C Pour point: -12C (10.4F) Flash range: No InflammabilityVapor Pressure: Almost like WaterSubstance Weight: 1.001g/mlSolubility in water: MisciblepH value: neutralVolatile components: WaterKinematic viscosity: 2.23mm2/sec at 20c and 4.74mm2/sec at 5cViscosity: 9.74 cps at 2C (35F) 6.10 cps at 21C (70F) 4.32 cps at 49C (120F)Surface tension: Product: 16.2 dynes/cm 1% solution: 20.8 dynes/cm 0.25% solution: 22.5 dynes/cm

Applications Class-A FiresClass-A fires are the most common type of fire. They occur when an organic solid material such as wood becomes sufficiently hot, and has oxygen available to it, causing combustion. Materials: Wood, Paper, Cotton, Hay, Coal, TiresApplication for Class A: 0.25% - 1%

Class-B Fires US Class-B fires involved flammable or combustible liquidNon-Polar SolventsMaterials: Gasoline, Diesel, Jet Fuel, Kerosene, Crude OilsApplication: 1%, 3% and 6%Polar SolventsMaterials: Alcohols, Acetones, Methanol, MEK, Ethanol Fuels (E-95, E-85, E-10)Application: 6% (indirect aspiration required)

Class-C FiresFlammable gases together with air or oxygen in the right concentration will burn (normally under pressure)Materials: L.P.G., Butane, Acetylene, Hydrogen, Natural Gas and MethaneApplication for Class C: 6% to blow the fire out, and 3% for producing a vapour barrier

Class-D FiresClass-D fires are metal fires. Certain metals, such as sodium, titanium, magnesium, potassium, lithium, calcium and others are flammable. Magnesium and titanium fires are most common Application for Class D: 6% (reduced pressure or aspiration required)

Class-E FiresClass-E fires are fires involving, and probably started by, potentially energized electrical equipment.Application for Class-E: DO NOT APPLY TO ELECTRICAL FIRES WITHOUT PROPER EQUIPMENT AND TRAINING

Class-F FiresClass-F fires are fires that involved cooking oils.Materials: Fat or greaseApplication for Class-F: 6% (misting reduced pressure or aspiration required)


FireAde 2000 AR AFFF

Environmentally formulated FireAde 2000 AR-AFFF is the newest generation in Alcohol-Resistant Aqueous Film Forming Foam (AR-AFFF).

Storage, Handling, and Self Life

FireAde 2000 AR-AFFF is to be stored in it’s original storage containers, drums, and tanks. The concentrate is subject to evaporation if exposed to air. The continer should be sealed at all times. If exposed to UV sunlight the red pigment may fade out. This will NOT effect the performance or warranty. The recommended storage is 35°F to 120°F (2°C and 49°C). Properly stored FireAde 2000 AR-AFFF with no dilution and contamination has an indefinite self-life. FireAde 2000 AR-AFFF is not affected by extreme low or high tempetures.

Environmental Information

FireAde 2000 AR-AFFF contains no ingedients reportable under the Superfund Amendments and Reauthorzation Act (SARA) Title III, Section 313 of 40 CFR-372 or Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). FireAde 2000 AR-AFFF is non-toxic, non-corrosive, non-harzardous, and biodegradable. It contains no PFOA and PFOS. No adverse effects should be expected if entered into ground water, surface water, storm drains, and local biological sewage treatment facilities. For further details refer to FireAde 2000 AR-AFFF Material Safety Data Sheet (MSDS).

Applications

FireAde 2000 AR-AFFF is used on a vast range of Class A and Class B fires. Typical applications include warehouses, spills, storage tanks, loading docks, loading racks, process areas etc. FireAde 2000 AR-AFFF like it’s predecessor FireAde 2000 is applicable at 0.25% on Class A Fires as a wetting agent.

Physical Properties

Appearance Red Viscous Liquid

pH 7.5-8.5

Viscosity 275 ± 50 cps

Min Storage Temp 35°F (2°C)

Max Stoarge Temp 120°F (49°C)

Effects of Freeze/Thaw None

This formulation signifies our commitment in protecting our environment with superior performance. FireAde 2000 AR-AFFF is used at 3% on hydrocarbon fires (non-water misable fuel) and 6% on polar solvent fires (water misable fuel). It is compatiable with standard foam equipment and foam systems. FireAde 2000 AR-AFFF concentrate is formulated to prevent additional environmental hazards when applied on all flammable liquid fires. The functions to produce a stable, heat resistant, and self sealing blanket are superior to tradional AR-AFFF and AFFF foams. FireAde 2000 AR-AFFF contains NO hazardous materials in the formulation. The special formulated concentrate has a dramatically reduced viscosity compared to most of the AR-AFFF types products. The viscosity enables FireAde 2000 AR-AFFF to be used in all types of foam proportioning systems, in-line eductors, and standard foam equipment.

Firefighting Foam


firefig

hting

equ

ipm

ent

Turbex

Turbex Mini

Hi-Combat Turbex Mk 2 High Expansion Foam Generator

The Hi-Combat Turbex Mk2 produces huge volumes of high expansion foam that will rapidly search out and extinguish fires in enclosed and inaccessible areas (eg. basements, mines, tunnels, cable ducts and warehouses) with minimal water consumption and subsequent water damage. Powered by a water turbine and aerofoil fan, all that is required for operation is a pressurised water supply and Expandol high expansion foam concentrate. A unique water by-pass system allows performance to be maintained while working against high back pressures. Expendable polythene ducting is supplied with each unit for accurate foam delivery. It is also ideally suited for rapid smoke extraction and positive pressure ventilation.

Hi-Combat Mini Turbex High Expansion Foam Generator

The Hi-Combat Mini Turbex is a fast-response high expansion foam generator and smoke extractor. Rapidly deployed by one fire fighter, it gives valuable time to deploy the larger Hi-Combat Turbex Mk2. This equipment is supplemented by a complete locally manufactured range of A Class foam equipment ideal for use by rural and forestry brigades.

High Expansion Foam Generators


CAFS

The Enforcer 10 is a unique small CAFS system that contains 10 gallons of foam solution. The Enforcer 10 CAFS is capable of producing up to 200 U.S. gallons of finished foam. The Enforcer 10 CAFS produces a foam structure which can stick to horizontal and vertical surfaces thus providing a vapor barrier between the fuel and air. The Enforcer 10 CAFS has a discharge distance of up to 45 feet allowing for a safe distance between the system operator and the fire or hazard. EnforcerOne has developed a line a products that are easy to use as well as drastic reducing points where vital components could be broken or tampered with. The Enforcer 10 CAFS is a versatile firefighting tool with the ability to be adapted to many different risk areas.

The advantages of the Enforcer 10 CAFS are the tight foot print allowing the unit to be mounted or used just about anywhere. The Enforcer 10 CAFS comes with 75 feet of hose that enables the user to reach a fire within 100 feet of the unit in any direction. The Enforcer 10 is easy to move and can be adapted to a multitude of different application’s mobile and non-mobile (ATV, UTV, SUV, Trucks, Trailers, Heavy Rescues, Heavy Agro and Earth Moving Equipment). The Enforcer 10 gives you tremendous firefighting foam capability in a small easy to use package.

The Enforcer 30 is a portable wheeled CAF system that contains 30 gallons of foam solution. The Enforcer 30 portable CAFS is capable of producing up to 600 U.S. gallons of finished foam. The Enforcer 30 produces a foam structure which can stick to horizontal and vertical surfaces thus providing a vapor barrier between the fuel and air. The Enforcer 30 portable CAFS has a discharge distance of up to 65-75 feet allowing for a safe distance between the system operator and the fire or hazard.

EnforcerOne has developed a line of products that are easy to use, as well as drastic reducing points where vital components could be broken or tampered with. The Enforcer 30 is unique in that it comes with a 100 foot hose Reel that will hold ¾ Inch Diameter Hose. This makes the Enforcer even easier to use. The Enforcer 30 portable CAFS is a versatile firefighting tool with the ability to be adapted to many different risk areas. EnforcerOne is able to manufacture a wide range of configurations and custom designs based on the specific needs of the customer.

Enforcer 10

Enforcer 30

Enforcer® CAFS are effective, affordable, portable and easy to use. Enforcer CAF systems utilize high energy compressed air to provide unparalleled fire knockdown, extinguishment, and vapor suppression. EnforcerOne is committed to saving lives and property by manufacturing quality and cost effective, portable Compressed Air Foam Systems (CAFS).

EnforcerOne only recommends Fireade®2000 products for use in their CAF systems because of the Fireade®2000 product characteristics:

• Non Corrosive • Environmentally Friendly • Biodegradable • Green Agent Technology™

Fireade®2000 is a true Class A & B Fire fighting foam and holds the following certifications:

• NFPA 18 Wetting Agent • UL 162 Flammable Liquid Certifications

When powered together, EnforcerOne and FireAde®2000 create a new benchmark in the industry. “Don’t fight fires...Extinguish them™”.

EnforcerOne CAFS are Effective, Easy to Use, Easy to Refill, Easy to Maintain and reasonably priced. The EnforcerOne Portable CAFS can be used in any locale where fire is a danger.


firefig

hting

equ

ipm

ent

Enforcer 60

The Enforcer 200 is a stationary or portable CAFS system that contains 200 gallons of foam solution. The Enforcer 200 CAFS is capable of producing up to 4000 U.S. gallons of finished foam. The Enforcer 200 produces a foam structure which can stick to horizontal and vertical surfaces thus providing a vapor barrier between the fuel and air. The Enforcer 200 CAFS has a discharge distance of up to 95 feet with the 1” Booster Line, and 120 feet with the 1 ½” Lay Flat Line. The long discharge distances allow for a safe distance between the system operator and the fire or hazard.

EnforcerOne has developed a line of products that are easy to use, as well as drastic reducing points where vital components could be broken or tampered with. The Enforcer 200 CAFS is a versatile firefighting tool with the ability to be adapted to many different risk areas. EnforcerOne is able to manufacture a wide range of configurations and custom designs based on the specific needs of the customer.

The Enforcer 60 is a portable wheeled CAF system that contains 60 gallons of foam solution. The Enforcer 60 portable CAFS is capable of producing up to 1200 U.S. gallons of finished foam. The Enforcer 60 produces a foam structure which can stick to horizontal and vertical surfaces thus providing a vapor barrier between the fuel and air.The Enforcer 60 portable CAFS has a discharge distance of up to 95 feet allowing for a safe distance between the system operator and the fire or hazard.

EnforcerOne has developed a line of products that are easy to use,as well as drastic reducing points where vital components could be broken or tampered with. The Enforcer 60 easily transforms in to a stationary system. Enforcer 60 portable CAFS is a versatile firefighting tool with the ability to be adapted to many different risk areas.EnforcerOne is able to manufacture a wide range of configurations and custom designs based on the specific needs of the customer.

Enforcer 200


• Educts foam concentrate into hose lines through a pump’s suction and discharge sides, also known as an “Around-The-Pump” system.

• Will educt concentrates at percentages of 0% to 3.75% at flow rates from 15 to 125 GPM at 100 PSI.

• Maximum operating pressure of 300 PSI.

• Includes an 18” Pressure Hose and a 48” Foam Pick-up Hose.

• Use stock code 4171KIT to include one 1-½” Cast Aluminum Connecting Tee and one 2” Cast Aluminum Connecting Tee.

Scotty “Through-the-Pump” Foam Eductor/Mixer

Foam Equipment


firefig

hting

equ

ipm

ent

• Transforms any pressurized fire hose or water supply line into a fire foam generating station.

• A fire crew can arrive at an incident where a quick layer of foam is required, such as a spill or haz-mat situation, attach a supply hose and place the foam where it is needed.

• The unit can be left unattended to create a blanket of foam over a large area.

• The system consists of a 15 GPM Scotty Foam Eductor set for either 1% for Class A foam or 3% for Class B foam, a Fog Nozzle with Medium Expansion Attachment, a bale Shut-Off with 1-½”swivel connection mounted on a cap and a pick-up assembly for a 5 gallon pail.

• The Foam Factory is designed for a nominal operating pressure of between 50 and 100 PSI.

• Please specify standard NHT or NPSH thread when ordering.

• Displays real-time measurement of the percentage of Class A foam concentrate in hose lines.

• Senses foam concentration 60 times a second.

• Calibration is a simple two step process.

• Sealed, weather-proof housing is suitable for harsh environments.

• Display Console measures 5.7” x 3.8” x 2.3”.

• Includes Display Console, 1-½” Sensor Tee with NHT or NP threads with 5’ long connection cable.

• Self powered by 2 AA batteries (included).

• Maximum operating pressure of 300 PSI.

• Automatic power down after 30 min. to save battery life.

The Scotty 4070 “FoamCheck Pro” is a device for obtaining real-time measurement of the percentage of foam concentrate in fire fighting hose lines. The user simply runs fresh water through the Sensor Tee (after mounting it on the discharge side of the pump) while pressing the “Zero” button on the Display Console for five seconds. Then set the pump’s foam proportioner (such as the Scotty 4071) to 1% and flow foam/water solution while holding the “Cal” for five seconds. The Console is now ready to display the real-time measurement of foam concentration flowing through the Sensor Tee.

The Scotty 4070 FoamCheck Pro consists of the Display Console (5.7” x 3.8” x 2.3”), a 1-½” Sensor Tee with either NHT or NPSH threads and a 5’ long cable for connection to the Display Console. The FoamCheck Pro is self-powered by 2 AA batteries, which are included. The maximum recommended operating pressure for the 4070 FoamCheck Pro is 300 PSI.

Foam Factory

Foam Check Pro - Foam Concentrate Meter

Foam Equipment


4037-HF, 50gpm to 100gpm, 1.5” NP

4037-HFA, 50gpm to 100gpm, 1.5” NHT

4037-LF, 15gpm to 50gpm, 1.5” NP

4037-LFA, 15gpm to 50gpm, 1.5” NHT

• Designed for use with In-Line Foam Eductors, these Nozzles cannot be closed off.

• Available in High-Flow (HF = 50 to 100 gpm) and Low-Flow (LF = 15 to 50 GPM).

• 4037 units include a Pistol-grip, bale shut-off.

• Suitable for Class A and Class B foams.

• Comes with 1-½” NHT, NP or BSP swivel connections.

• For the nozzle only (with no Shut-Off capability), use stock codes: 4035-HF and 4035-LF.

• ¼” tip opening for penetrating deep into the forest duff.

• Tip opening can be bored out for higher flow.

• Includes double female fitting to provide female thread connection. 1-½” (38 mm) NHT, NP or BSP mae threads.

• Maximum operating pressure 150 PSI.

• Manufactured from engineering grade, composite polymers for durability at the fire scene.

• All 1-½” Scotty Air Aspirating Nozzles include a double female connector, 4085 (NP) or 4086 (NHT).

• S = Stubby Nozzle option (Seen at end of certain product codes.)

4039MX , MX Foam Attachement

4039MX-HF , MX Foam Attachement with 4035-HF

4039MX-LF , MX Foam Attachement with 4035-LF

• Designed to fit the Scotty 4035, 4037 and 4038 Fog Nozzles.

• Also fits the UFS 1575 Fog Nozzle.

• Generates a thick stream of medium expansion foam for car or tire fires, haz-mat or any situation where a thick smothering foam blanket is required.

• Quickly lays down a foam firebreak for forest and grassland fires.

Fog/Straight Stream Nozzle with D-Handle Pistol Grip

Penetrator Nozzle

Air Aspirating Foam Nozzles

Medium Expansion Foam Attachment

Foam Equipment


firefig

hting

equ

ipm

ent

• All the components and features of the 4000-BP Hand Pump & Backpack (above) with the addition of a foam eductor and air-aspirating nozzle (4003).

• The 4000F-BP eliminates the need to batch mix when Class A foam is required.

• Each time pump draws water, foam concentrate is educted at 1% into the pump chamber.

• The 4003 air-aspirating nozzle generates foam when the pump is discharged.

• Includes 4 foot Pick-up Hose with Quick Connect Shut-Off and Pump Service Kit (4000SERV-DB).

Foam Hand Pump & Backpack

Knapsacks

Scotty 4000-BRAVO

• 4” Filler Port with debris screen (removable), water tight Lid (Screw Cap) with O-Ring and anti-loss retaining strap.

• Internal, removable 6 gallon bladder.

• Standard, ¾” garden hose thread outlet port. Location: 3” from bottom center.

• 2” wide, padded nylon webbing shoulder straps with accessory loops.

• Spine protecting center padding.

• A sternum strap with quick release buckle on ¾” wide nylon webbing connects across the chest.

• Doubled zippered extra equipment storage pocket with clear label window (allows for display of crew name and number).

• A carry handle made from 2” wide nylon webbing is located on the top of the bag.

• A 4062 4’ ¾” hand pump supply hose.

• A 4000 or 4000F Hand Pump System.


Knapsacks

4030BP50

Scotty Foam Eductor Backpack Systems

Scotty 4045A-30“Roll & Foam” Mobile Foam Attack System

The 14 gallon (53 Litre) foam container is made of polyethylene.

• Unit Weight: 22 lb. (Empty)

• Unit Dimensions: Height 34 inches x Length 19 inches x Width 15-½ inches

• A fabric dust cover is available for the unit, stock code 4045CVR

• Flow Rate of 30gpm, pressures from 50psi to 150psi.

• Suitable for industrial sites and installations, warehouse storage facilities, lumberyards, mines, shopping malls, schools, marinas, harbors or aircraft hangars.

• Portable, lightweight and made of corrosion-proof materials.

• Backpack with 5 gallon capacity

• Foam pickup hose with foam control quick connector

• Air aspirating nozzle with matching foam eductor

• D-Handle shut-off with pistol grip, 1-½” thread Optional Variable Checkvalve

The Back Pack systems can be fitted with the 4064 Variable Checkvalve foam control unit. The presets are OFF, .5%, 1% and 3%. The first 4 digits correspond to the air aspirating nozzle included; the last two digits indicate the flow rate (gpm). Systems available with NPSH, NHT(A) and BSP(B) threads. (Please indicate threads when ordering from your distributor).

4037FBP70


firefig

hting

equ

ipm

ent

Drip Torch

The Drip Torch has been developed by the original developer behind the original ‘FireBug”.

The Next Generation Drip Torch has much improved features including:- Non Return Valve at the wand base - preventing accidental internal fire risk.

Stainless Steel Wand - Physically stronger than the traditional mild steel

Fibre Wick - longer lasting life than the traditional stone wick and not susceptible to flame out

Secondary False Bottom - extending the working life of your drip torch

4.5 litre Capacity - More time between refills

Locally Manufactured - providing more jobs for Australia.

Scotty 4056 Scotty Squall Wall

When connected to a water supply hose the angled ramp within the unit directs the water flow up through the opening vent. Depending on flow and pressure, the Squall Wall can create a wall of water up to 40 feet wide and 20 feet high. The Squall Wall™ can be secured to the ground with a spike or to a plywood plate for fast deployment. It can also be pre-positioned and permanently mounted on rooftops, walls, and gantries, even in trees. The Squall Wall™ is available in three different flow rates: 15gpm, 30gpm and 50 gpm at 100 psi. The 4056 come in the following configurations:

4056** Male 1-½” NPSH threads

4056-**A Male 1-½” NHT threads

4056-**AF Female 1-½” NPSH threads (4086 Connector)

4056-**F Female 1-½” NHT threads (4085Connector)

4056-**QC Quarter Turn Quick Connect (4089F Quick Connect)

4056-**TA with 1-½” NHT Tee

4056-**TC with 1-½” NPSH Tee

Rega Knapsack - 16lt - Red

This very high quality Rega fire fighting knapsack is an ideal alternative to an air / water fire extinguisher. It is designed to extinguish small low intensity fires such as spot fires in a bush fire situation.

The knapsack has a large water capacity, variable jet / fan nozzle, bi directional pump action and excellent range. It can deliver 1.2lt per minute and is designed to be a comfortable fit utilising two adjustable shoulder straps.

Capacity 16 litres

Nozzle Type Jet / Fan

Range 7.5 - 9m Jet / up to 4.5m Fan

Material Polypropylene body / brass pump body

Appearance Red with black straps. Red pump body

Dimensions

- Width 385mm

- Height 450mm

- Depth 175mm

- Weight 2.9kg


Stinger 2.0

• Dual purpose break-apart monitor for use as a deck gun or portable monitor

• Numerous truck adapter and portable base options available to suit every need

• In portable mode, five forged aluminum legs with self-adjusting carbide-tipped ground spikes increase stability

• Rotation lock mechanism provides positive left-right lock with visual position indication

• By-passable safety stop at 35° above horizontal

• Safety chain for additional stability

• Lightweight for its class

• Most flow efficient in its class with a friction loss reducing 33/8” vaned waterway

• Patented monitor to base latching mechanism is user -friendly and provides visual indication of status

• Fully enclosed stainless steel worm gear

• Liquid filled pressure gauge

• Two carrying handles

SM-1000HF –SELF-EDUCTING

SM-1250 –X-STREAM ®

282-A –STREAM SHAPER

Recommended ProductsST-194 –

QUAD STACKED TIPS

Rapid Attack Monitor - R.A.M • Easily deployed and operated by a single firefighter

• Patent pending hydraulic stability system harnesses reaction force to stabilize the monitor

• Four fold-out forged aluminum legs with carbide-tipped ground spikes extend to the largest footprint in its class for exceptional stability

• Rear ground spikes are angled to help carbide tips grip the surface

• Lock pin holds valve in a closed position to prevent accidental opening, allowing the R.A.M. to be carried attached to a charged line

• Patent pending design lowers friction loss and produces consistent stream quality in all ranges of motion

• Can be stored pre-connected

• Ergonomic U-shaped valve handle

• Attached safety strap includes storage pouch


Recommended Products

3896 –R.A.N.™

ST-197ASTACKED TIP

282-A – MINISTREAM SHAPER

181-A –DELUGE TIP

HF-500A – HYDRO FOAM

CSW-C-HF –SELF-EDUCTING

Monitors

FLOW 5.17 bar

REACH 70m


firefig

hting

equ

ipm

ent

8287

• Lightweight Elk-O-Lite® design flows up to 1250 gpm (4732 lpm)

• Three 21/2” clappered inlets lead to a 3” dual waterway

• 100° vertical travel (with a by-passable safety stop at 25° above horizontal)

• Continuous 360° horizontal travel plus positive left-right lock with visual position indication

• Construction increases stability through design:

– Three solid steel, chrome-plated legs with adjustable ground spikes

– Two rear angled ground spikes attached to the monitor body

• 10’ tie-down chain for additional safety

• Two carrying handles

ST-194 –QUAD STACKED TIPS

Recommended Products

284A –STREAM SHAPER

SM-1250 –X-STREAM ®

283A –STREAM SHAPER

SM-1250E –X-STREAM®

Recommended ProductsST-194 –

QUAD STACKED TIPS282A –

STREAM SHAPEREXTENDER

Stinger 2.0 RF

• Stinger® RF is a dual purpose break-apart monitor for use as a deck gun or portable monitor

• Wireless RF increases effective use of personnel while reducing the potential risk of injury

• Monitor can be remotely operated from up to 1/4 mile away — in either deck gun or portable mode — with hand-held transmitter

• When used in deck gun mode, the Stinger® RF requires only 12V power connector — dramatically reducing installation costs with an easy 2-wire connection

• When used in portable mode, the Stinger® RF is battery powered and completely self contained

• Battery will operate for up to 4 hours of normal use per charge

• Patent pending easy on-scene programming of oscillation for exposure protection or hazardous material suppression

• Exclusive dual speed left/right drive feature allow precision stream placement

• Unlimited number of monitors may be operated interference free

• Several ISM bands available for license free use around the world

Monitors


• Nozzle mounting system for trucks, ATVs or boats.

• Includes mounting plate, full 360º rotating pedestal base and adjustable nozzle tube.

• Recommended for up to 1-½” hose lines, pressure of 50 to 150 PSI.

• Angle of tube can be locked in one of seven positions.

• ABS, Ny-Glass and Stainless Steel construction.

• Extremely durable and impervious to corrosion.

4049-15 , Mini Monitor with 15 GPM Foam Tube 1-½” NP

4049-15A , Mini Monitor with 15 GPM Foam Tube 1-½” NHT

4049-30 , Mini Monitor with 30 GPM Low-Flow Fog Nozzle 1-½” NP

4049-30A , Mini Monitor with 30 GPM Low-Flow Fog Nozzle 1-½” NHT

4049-50 , Mini Monitor with 50 GPM Foam Tube 1-½” NP

4049-50A , Mini Monitor with 50 GPM Foam Tube 1-½” NHT

4049-50SB , Mini Monitor with 50 GPM Smooth Bore Nozzle 1-½” NP

4049-50SBA , Mini Monitor with 50 GPM Smooth Bore Nozzle 1-½” NHT

Mini Monitor - Base Only

Mini Monitor Systems

4049-30

4049

4049-15

(Shown with optional 4039MX Foam Attachment)

4049-50SB

Monitors


firefig

hting

equ

ipm

ent

The HEROPipe™ System

World’s first lightweight, safe and simple, floor-below, high-rise master stream system.

High-rise fires present incredible challenges for firefighters while threatening the safety of civilians and firefighters alike. Previously, fires located above a high-rise’s 12th floor required firefighters to battle the fire either directly or from an adjacent building if possible.

The HEROPipe™ System has been specially designed for fires that ladder companies cannot reach. With the HEROPipe™ System, fire departments can effectively battle a blaze from the floor below, keeping firefighters at a safe distance from the fire’s most dangerous areas.

The HEROPipe™ System can be secured to nearly any type of building construction or height. The hydraulic stabilizers keep the system securely in place whether it is on a building with a window sill or curtain wall style construction.

Features:

• 625 GPM @ 80 psi max. flow rate (at Nozzle)

• Remote Controlled Articulating Nozzle - 40° Horz. & 80° Vert.

• Telescopic Waterway - 7’ 9” - 15’ (w/ monitor attached)

• Self-limiting, 350 lb max. pressure Hydraulic Stabilizer Bars

• Ratchet-locking Sill Clamps - 1200 lb Nominal pressure

• T-6061 Aluminum alloy base unit

• Quick connect system for fast & effective monitor connection

• Sealed to NEMA 4 - Monitor and controllers

• Built-in pressure gauge and valve to control Pipe pressure

• Monitor mountable accessory rail - Light kit, thermal camera, etc.

Tactical Advantages:

• World’s first high-rise exterior master stream system

• Set-up on a window sill or on the floor edge on a curtain wall construction

• Lightweight for easy mobility and deployment

• Designed to transport in elevators

• No tools required

• Minimum training required

• Operational in minutes

• Attack fires from the safety from the floor below

• View the attack from below with optional thermal image capabilities

• Battery operations up to 1.5 hours

• Capable of operating unmanned in WMD or collapse threats

• Introduce foam, chemical, or biological neutralizing agents from below

Hero-Pipe


Rapier Extruded Fire Hose Heavy Duty Fire Hose with Added Protection

Centurion Hose Tough high pressure fire hose

It is a high pressure Type 3 fire hose, which is manufactured with an extruded synthetic rubber cover. This extruded cover protects the hose against abrasion and chemical damage.

This woven fire hose is made from polyester with a synthetic rubber lining and cover. The interior lining and exterior coating on the fire hose jacket is made from PVC nitrile. This extruded cover is highly chemical and abrasion resistant.

The Rapier is usually supplied in 30m lengths but longer lengths,

up to 200m, can be made.

The Rapier is easy to store and is also UV stabilised so it stands up well to prolonged outdoor use.

All Crusader Hose is manufactured in our ISO 9001 quality accredited factory and comes with a standard 12 month warranty.

With an ISO 9001 program in place, Crusader Hose conforms to specific industry standards. We comply with Australian Army Standard DEF 5195A and AS 2792 for fire hose

• mildew resistant due to its synthetic construction

• maintenance free

• ready for mounting to a fire truck or other deployment situation

• can be stored wet

• complies with fire services and ADF standards

• It is available in a wide variety of diameters

• 12 month full replacement warranty

• Shipped complete with fittings if required

The Centurion layflat fire hose has been constructed with the demands of professional fire fighting units in mind. The internal tightly woven polyester jacket makes this hose suitable for high pressure pumping applications, combined with protection against abrasion and exposure to the elements.

All Centurion fire hose are sold as kits, complete with stainless steel clamps, shut

off nozzles and BPS fittings, so they’re ready for immediate use. Usually this hose is supplied in 30m lengths but longer lengths can be made up to 200m.

This twill-woven fire hose is made from polyester with a synthetic rubber lining and requires no drying after use.

Centurion hose is manufactured in Australia and carries an approval of Australian Standard AS 2792-1992 and the Australian Army Standard DEF 5195A-1992.

It is mainly used for:

• Fire brigade use

• Hose layer units for brigade support

• Commercial fire protection

• High pressure wash-down

Sizes available are:

30M x 38mm, 30M x 52mm, 30M x 65mm and 10M x 35mm

Hose


firefig

hting

equ

ipm

ent

Sabre Hose Fire hose for extreme fires

Sabre is Crusader Hose’s premium percolating fire hose. This is a layflat percolating fire hose which allows precision engineered seepage of water under pressure through the hose fabric jacket. This percolating feature forms a water barrier on the hose jacket which protects the hose against the effect of heat and glowing embers.

Sabre fire hose can be manufactured from 25mm to 102 mm diameter.

It is lightweight yet sturdy construction enables fire fighters to take this fire hose into dense bushfires transporting the fire hose in backpacks. The hose is fully

synthetic thus making it mildew resistant. As a result this hose is maintenance free so no drying is required after use.

Usually this hose is supplied in 30m lengths but longer lengths can be made.

All hose manufactured in our ISO 9001 quality accredited factory and comes with a standard 1 year warranty.

This woven fire hose is made from polyester with a synthetic rubber lining. The lining is mechanically perforated for even seepage along the entire length. Depending on the types of fires, you can choose from 3 grades of percolation that can be obtained - low, medium and high.

Coverlite Fire Hose A high performance covered fire hose at an economic price for industrial and municipal fire services.

Features specially formulated high grade rubber extruded through an all synthetic woven jacket to give a non-kinking construction and the best rubber-to-textile adhesion that modern technology can achieve. Manufactured in compliance with BS EN ISO 9001:2000 quality management systems. Raw materials,

components, and finished products are rigorously tested and inspected to ensure excellent product reliability. Approvals Lloyds Register BS 6391 Type 2 UK Maritime & Coastguard Agency Wide range of couplings, manifolds, and hardware available.



Duraline Fire Hose The world’s premier maintenance-free covered fire hose for municipal and industrial fire services.

Features specially formulated high grade synthetic rubber extruded through an all polyamide woven jacket to give a nonkinking construction and the best rubberto- textile adhesion that modern technology can achieve. Manufactured in compliance with BS EN ISO 9001:2008 quality management systems. Raw materials, components, and finished products are rigorously

tested and inspected to ensure excellent product reliability.

Approvals Kitemarked to BS 6391 Type 3

UL Listed to UL 19*

UK Maritime & Coastguard Agency

Det Norske Veritas

Wide range of couplings, manifolds, and hardware available.



Hose


Couplings / AdaptorsFRSA supplies an extensive range of couplings and adaptors. These include all common styles including BIC, Storz, QRT and all other Fire Brigade and Forestry couplings. These are available in light alloy, brass and in some cases stainless steel.

Dividing Breech Controlled Dividers are used for distributing the extinguishing medium from one feed line over several hose lines, or in special cases for collecting it in the reverse direction. Each hose line can be shut-off individually by means of a stop valve. The stop valve of the dividers must be according to DIN 14365 easily operated in the usual flow direction at 16 bar and in the opposite direction at 6 bar.

Couplings


firefig

hting

equ

ipm

ent

Accessories

Drum & Pail Wrench

• Opens and closes the caps found on standard 5 gallon foam pails.

• Works for the large and small bungs on 55 gallon drums.

• Made of Ny-Glass in high visibility yellow and is spark and corrosion proof.

• Fits optional 4580 Mounting Bracket.

• Weighs 6.5 oz (185 g) and is 10” (254 mm) long.

The Scotty 4578 Pail & Drum Wrench is designed to loosen and tighten the caps found on standard (70 mm wide) 5 gallon foam pails and both the large and small bungs on 55 gallon drums. The 4578 is made from incredibly tough, glass-filled nylon, comes in high visibility colors and is spark and corrosion proof. The 4578 Wrench is 10” (254mm) long and weighs just 6.5 ounces (185g). Also available for the 4578 Drum & Pail Wrench, is the Scotty 4580 Wrench Mounting Bracket.

Super Spanner Hydrant Wrench

• Operates standard 1-½” and 1-¼” pentagon fire hydrant nuts.

• Opens large and small bungs on 55 gallon drums.

• Fits hose couplers ranging from 3” (76 mm) up to 7” (178 mm).

• 4 and 5” Stortz fittings.

• Opens standard 70 mm caps on 5 gallon foam concentrate containers.

• Municipal gas cock shut off.

• Oxygen tank shut-off and quick release snap hook.

• Fits optional 4580 Mounting Bracket (below).

• Weighs 14 oz (400 g) and is 17-3/4” (450 mm) long.

Wrench Mount

• Mounting Bracket for the Scotty 4578 and 4579 Wrenches.

• Simple snap clip secures Wrench in place on a wall or in a cabinet, etc.

• Can be installed vertically, horizontally or at virtually any angle.

The Scotty 4580 Mounting Bracket enables a Scotty 4578 Drum & Pail or a Scotty 4579 Super Spanner to be secured in place on a wall or in a cabinet, etc… The Bracket can be fastened vertically, horizontally or at virtually any angle. Once the Bracket is fastened in place, the Wrench can then be pulled out of and snapped back into the Bracket.


Depots

UNDERGROUND COAL MINING

Various Contents Available

240Lt red wheelie bin complete with reflective signage & identifier tape. Internal suspension basket

• 30mt x 38mm ‘H’ Fire Fighting Hose c/w GM/Brass Couplings, wire wiped, pressure tested & certified

• 30mt x 65mm ‘H’ Fire Fighting Hose c/w GM/Brass Couplings, wire wiped, pressure tested & certified

• 65mm Controlled Dividing Breech GM/Brass

• 65mm x 38mm Brass Fog Nozzle GM

• 65mm x 38mm Brass jet Nozzle GM

• Akron Brass Turbo Jet Controlled Branch

Various contents available – Bins are made to your site specification

Blue Wheelie Bin style Depot

Heavy Duty Pneumatic Wheels available as an option for Underground

Store up to 4 x 19L Pails of FireAde2000 with the following standard items

• 1 x Foam Branch with pick up tube pre-set at 3% or 6%• 1 x FireAde Pail Spanner• 1 x Hydrant Spanner

Designed & manufactured for the safe storage of Fire Fighting Equipment. System design minimizes entry of dust or moisture via use of continuous welds and seals. Large doors on each side of the station and inclined sides allows for easy access in an emergency situation.QDS attachment available to ensure safe and convenient transport. All work conducted under our certified ISO 9001 Quality System.

This Fire Substation stores the following equipment:• 6 x 38mm lay flat hoses

• 8 x 65mm lay flat hose

• 6 x 4.5/9kg fire extinguishers

• 6 x 20lt drum of fire fighting foam

• 2 x foam inline inductor

• set of spare nozzles

• set of dividing breeches

• set of hydrant spanners

Industrial Fire Depot

Foam Depot

First Response Fire Sub Station

Enforcer® CAFS are effective, affordable, portable and easy to use. Enforcer CAF systems utilize high energy compressed air to provide unparalleled fire knockdown, extinguishment, and vapor suppression. EnforcerOne

is committed to saving lives and property by manufacturing quality and cost effective, portable Compressed Air Foam Systems (CAFS).

EnforcerOne CAFS are Effective, Easy to Use, Easy to Refill, Easy to Maintain and reasonably priced. The EnforcerOne Portable CAFS can be used in any locale where fire is a danger.


PPV Blowers

Positive Pressure Ventilation (PPV) Blowers

Positive pressure ventilation fans/blowers are used to push fire and debris in the air toward an exhaust point. Because air heads from a high air pressure area toward a low pressure area, the concept pulls/pushes the fire and debris toward the exhaust point with it.

DS Series Positive Pressure Ventilation (PPV) Fans

The DS series positive pressure ventilation (PPV) fans feature high performance Honda motors, stainless steel frames, are tiltable from -10° to +20°, open shroud design, and are stand alone operational.

DST Series Positive Pressure Ventilation (PPV) Fans

The DST series positive pressure ventilation (PPV) fans feature large flatproof pneumatic style wheels and tires, 35” extendable handle, high performance Honda motors, stainless steel frames, are tiltable from -10° to +20°, and are stand alone operational.

Electric Series Positive Pressure Ventilation (PPV) Fans

The electric series positive pressure ventilation (PPV) fans feature come standard in the DS series frame but are available in the DST series frame as well as the Du-All frame (pictured) that allows the fan to be tilted in 180°.


firefig

hting

equ

ipm

ent

Portable Fire Pumps PB18-3030

Providing unbeatable fire protection, our PB18-3030 portable pump is an extraordinary water transfer and supply system with exceptional flow capacity and appropriate pressure for efficient hand-line fire suppression operations. Equipped with a V-twin Briggs and Stratton® 18 hp engine, the PB18-3030 portable pump delivers flow capacities from 100 GPM @ 110 PSI (380 L/min @ 7.6 bar) to 400 GPM @ 15 PSI (1500 L/min @ 1 bar).

Options & Accessories

Easily interfacing with numerous accessories, te Waterous PB18-3030

portable fire pumps provide a variety of options to fit the needs of your fire department. Three base options are available including a standard rigid steel channel rail base (control panel shipped loose), no base (control panel shipped loose), or wrap-around base (only available on PB18-3030C models) integrates a tubular-steel design to protect the pump and engine from roll-over damage, with vinyl-gripped sway handles that lock in either carry or stowed positions. A mast light (wrap-around base only) is also available.

Designed as combination pump, the durable and powerful Waterous PB18-2515 is direct drive centrifugal pump powered by a V-twin Briggs and Stratton® 18 HP (13.4 kW) engine, delivering The 75 GPM @ 135 PSI (290 L/min @ 9.3 bar) to 150 GPM @ 90 PSI (600 L/min @ 6.5 bar).

• Briggs & Stratton, model 356447, Vanguard V-Twin air cooled, overhead valve (OHV) design delivers a maximum output of 18 hp (13.4 kw) @ 3600 RPM. 34.75 cu. In. (570 cc) displacement, 4-cycle, gasoline-fueled, horizontal shaft.

• 2-1/2-inch female NPT intake.

• Discharge: ball valve with 1-1/2-inch male NH thread (2515B). Ball valve with 1-1/2-inch female NPT (2515B). 1-1/2-inch female NPT (2515F) (no ball valve).

• Operator panel includes discharge pressure gauge, compound intake pressure gauge, low oil pressure warning light, start and stop control, speed control, panel light and 12-volt outlet.

Portable Fire Pumps PB18-2515

Pumps

The Waterous Floto-Pump One High Performance Pump. Two Powerful Models.

Our Floto-Pumps™ are available in two models, the Standard and the High Pressure. The Standard Floto-Pump™ produces maximum pressures of 105 PSI (7 bar) and maximum flows of 140 GPM (530 L/min.). Designed specifically for forest fire applications, the High Pressure Floto-Pump™ throws a stream of water over 85 feet (26 m) at 170 PSI (12 bar) and produces maximum flows of 60 GPM (230 L/min.). Both versions of the Floto-Pump™ are powered by U.S. Motor Power “Power Bee” engine. Options & Accessories

Available with a variety of options to fit the needs of your fire department, the Waterous Floto-Pump™ portable fire pumps easily interface with numerous accessories. A 1.5” forestry fire hose is available for the High Pressure model. For both the Standard and High Pressure models, a nozzle and spanner wrench is also available.


Portable Fire Pumps E501A/E511A

Portable Fire Pumps E501A/E511A

Waterous’ high-pressure model, the E501-A, operates at a flow capacity up to 50 GPM (190 L/min) at 400 PSI (28 bar) and 110 GPM (420 L/min.) at 100 PSI (7 bar).

The Waterous E500 Series water pump is specifically designed for mounting on specialized attack vehicles and available in two performance models, the E501 and E511. Providing versatility with high-pressure and high-capacity flow options, the E501 and E511 models dispense powerful water delivery, no matter the situation.


Easily interfacing with numerous accessories, the Waterous E500 portable fire pumps come with a variety of options to fit the needs of your fire department. Priming system options are available, which include Waterous’ hand and electric primers that are shipped loose for remote mounting. Single municipal, dual municipal (includes an In-cab panel) or deluxe control panels specifically designed for the E500 are also available.

The E300 Series water pump provides the versatility of a combination apparatus in a skid-mounted design with the convenience of a portable fire pump. Equipped with Kubota ® 1335cc diesel engine and a Waterous CPT-2 Series fire pump, the E300 produces a maximum flow of 325 GPM (1200 L/min.) or a maximum pressure of 210 PSI (14.5 bar).


Fitting the needs of your fire department and easily interfacing with numerous accessories, the Waterous E300 portable fire pumps come with a variety of options. Priming system options are available, which include Waterous’ hand and electric primers that are shipped loose for remote mounting. Material options for the CP-2 volute body and head are also available, and include close-grained gray iron or bronze.

Pumps

Designed for wildland firefighting and attacking fire suppression, the rugged and powerful Waterous PB18-G2015 wildland fire pump is a gear-driven centrifugal pump powered by a V-twin Briggs and Stratton® 18 HP engine that delivers flows from 20 GPM @ 320 PSI (80 L/min. @ 22 bar) to 75 GPM @ 190 PSI (290 L/min. @ 13 bar).


The Waterous PB18-G2015 wildland fire pumps come with a variety of options to fit the needs of your fire department and easily interface with numerous accessories. Three base options are available including a standard rigid steel channel rail base (control panel shipped loose), an optional no base (control panel shipped loose), and an optional wrap-around base that integrates a tubular-steel design to protect the pump and engine from roll-over damage, with vinyl-gripped sway handles that lock in either carry or stowed positions. A mast light (wrap-around base only) is also available.

Portable Fire Pumps PB18-G2015


firefig

hting

equ

ipm

ent

Self Supporting Interceptive Tanks

Closed Rubber Tanks

They are used for emergency interceptions of hazardous liquids (in uncontrolled tank or pool spills, etc.) or for creating water supplies, for extinguishing, snowmaking, etc.

The tanks are made of double-layer rubber-coated polyester fabric, which is well resistant to chemicals and mineral oils. The tanks have an inflatable tubus, which is inflated up to the pressure of 0.3 bar. The ring has a regular inflatable boats inflation valve and a safety valve that allows the maximum pressure of 0.3 bar.

The tubus of unfolded tank fills up with air. When filling the tank with liquid the tubus as well as the tank rise up to the maximum height with the rising of the liquid level. The tank is emptied through the discharge hose at the bottom of the tank. The end of the release pipe has a Storz coupling C with a seal upon which a fire hose can be attached to pump the liquid out of the tank. The tanks are packed in bags and take little space. They are resistant to temperature changes and have a long lifespan that can be prolonged by using lining. Thus the possibility of damage can be reduced when using the tank on an uneven or rough surface.

Filled tank can be covered with a tilt, preventing unwanted materials (atmospheric precipitations or dust) from entering the stored fluid.

Closed tanks are suitable for storage of various liquids, including water. They are pillow-shaped and equipped with two or more nipples, depending on the size of the tank. The middle nipple on top is intended for venting air, whereas other nipples are for filling and emptying of the tank.

The tanks are made of double-layer rubber-coated polyester fabric. The tanks are well resistant to chemicals, mineral oils, and industrial water and can be used in temperatures ranging from -30°C to +90°C. The tanks are produced in two colours: green and beige.

Closed rubber tanks’ main characteristics are that they take little space folded, they have a long lifespan, and they are easy to maintain.

Different sizes of closed rubber tanks are already available. In addition, adaptable manufacturing process enables the production of custom made tanks of different sizes and shapes.

Water storage


• Rugged epoxy coated all steel cylinders

• Resist corrosion, dents and punctures

• Chrome plated brass valve body

• Stainless steel handles and levers

• Stainless steel hose retaining clip and bands

• Suitable for A, B, C and E class fires

Fire blankets are ideal for residential and commercial settings where small Class Fires are a risk.

A fire blanket extinguishes a fire by cutting of the fire’s supply of oxygen, by smothering it.

Fire Extinguishers

1kg 2kg 4.5kg 9kg

Fire Blankets

• 50ltrs of FireAde 2000 Foam Solution

• Suitable for Class A, B and F Fires

• Approved for the Aviation Industry – ICAO Level B

• Heavy Duty Trolley with Two large rubber wheels with additional lockable castor wheel.

• Simple to deploy and move to the fire scene

• Black-Out Nozzle - Adjustable Jet Spray

• 15 meters of hose

FireAde 200050Ltr Mobile Fire Extinguisher

Extinguishers


firefig

hting

equ

ipm

ent

Firex 9.0 Litre Air Water Extinguisher

• Suitable for A class fires

• Controlled on / off Discharge

• Supplied with water inhibitor

• Pressurised with standard chuck

• Approved to AS / NZS 1841.2

Rating 3A

Operating Pressure 690kpa

Dimensions Height 630mm x Diameter 180mm

Overall Mass 12.5kg

Water Fire Extinguisher

9.0 Litre Air Foam Extinguisher

• Suitable for A class fires

• Controlled on / off Discharge

• Included is the 6% Foam concentrate

• Pressurised with standard chuck

• Approved to AS / NZS 1841.4

Rating 3A20B

Operating Pressure 1000kpa


Overall Mass 12.5kg

Foam Fire Extinguisher

Carbon Dioxide (CO2) Extinguishers

CO2 Fire Extinguishers

• Lightweight aluminium cylinder

• Chrome plated brass valve body

• Rugged epoxy coated finish

• Stainless steel handle and lever

• Suitable for B and E class fires

• All approved to AS / NZS1841.6

• UV Resistant Paint

2.0Kg CO2 Extinguisher

Rating 2B:E Dimensions Height 540mm x Diameter 110mm

Overall Mass 5.2kg


Rating 5B:E


Overall Mass 9.3kg


Rating 5B:E


Overall Mass 12.4kg

Extinguishers


Lapel Mic Keeper

Small Fire Flashlight Retractor

Mic Keeper - Fire Fighting

Tired of Wearing your Mic Around your Ankles?

The Lapel Mic is securely attached to your Turnout Coat or Pack Strap. Allows Mic to be securely extended for talking/listening, without the Mic being dislodged / dropped or the need to re-clip after use.

• Easily and securely attaches to turn out coat or air pack harness

• Mic quickly and securely attaches to Mic Keeper

• Grab Your Mic, Use It, Let it Go - it’s always right where you need it and up off the ground

• Mic quickly and securely attaches to Mic Keeper with bungie Mic adapter

Firefighter / Rescue Small Flashlight Retractor

Recommended for small flashlights (4AA-2C)

Grab your light, use it, let it go... it’s right where you need it

Simply extend the tether for easy use and eliminate the risk of loss or the need to re-clip flashlight. Ideal when using your flashlight and you need to let go to use both hands!

LED Flashlight Retractor - Carabiner

Small Gear Tethers - for Knives, Seat Belt Cutters, Safety Whistles

Carabiner

LED Boxlight Retractor

For Streamlight Fire Vulcan LED Only

Built to Last! Multiple Mounting Options

If you’re tired of losing an important key or your small tools, then this is the product for you. Three mounting options mean you can attach this retractor to almost anything; it allows full arm extension, tools are easily disconnected or swapped, it’s real strong (50-lb break strength using Spectra/Nylon line).

• Stainless steel components survive in salt water environments

• Quick Connect (Q/C) Split Ring allows quick and easy key/tool disconnection

Lanyards


firefig

hting

equ

ipm

ent

E-Flare Kit

Emergency Services (EMS) Kit - HZ530 Eflares Red / Blue

Each Kit Contains

• 4 x HZ530 Red / Blue Eflares (Batteries not included)

• 4 x Rubber Bases

• 4 x Cone Clips

• 1 x Carry Bag

The Traffic Master Glow Baton

The Traffic Master Glow Baton is a light emitting signaling device. The Traffic Master Glow Baton is made of high quality impact-resistant durable plastics and is built to perform under the most adverse and hazardous conditions. It is non-incendiary and can be used in situations where typical flares would be too dangerous. The Traffic Master Glow Baton is water resistant making it appropriate for use in and around water. This high performance, state-of-the-art signaling device is available in various colors. Models feature a choice of colors with simple push-button operation.

Kestrel 3000 Pocket Weather Meter

• Current Wind Speed

• Maximum Wind Gust

• Average Wind Speed

• Air , Water & Snow Temperature

• Wind Chill

• Relative Humidity

• Heat Stress Index

• Dewpoint

Road Traffic cones

• High quality orange PVC

• 450mm height

• 150mm reflective tape

• High intensity reflective tape

• Sold individually

Jerry Cans

AFAC Plastic ID Fuel Tags

• Tested safe, tough, durable and corrosion resistant • Meets Defence Force Specifications (BAM)

• Passes all drop tests and will not leak under pressure • Will not rust

• No loss of integrity under Standards flame tests

• World patented locking-pin

• Certified to Aust/NZ Safety Standard AS/NZS 2906:2001

• Certified by BAM to International Regulations for Packaging for the transport of Dangerous Goods by Road (ADR), Rail (RID), Sea (MDG) and Air (ATA-DGR)


Pelican 9440 Remote Area Lighting System

The most innovative RALS unit to date, the 9440 moves fast to light up ravines, confined spaces, riverbanks... anyplace generator lights can’t go. Deployed, the mast extends 7 feet high, shining light over low obstructions encountered by traditional lantern style lights. With a 120 degree beam spread and up to 2400 lumens, the entire emergency area will have the light you need for a safe and swift operation.

The 9440 is maintenance free, using super tough LED lamp modules and NiMH batteries for up to 6 hours of continuous light.

Adjustable carrying strap included.

Pelican 9430Remote Area Lighting System (RALS)

The 9430 Remote Area Lighting System is the perfect unit for hard to reach places.

At just 22 lbs., the 9430 is easily transported up stairs or ladders. Its compact size and fully extendable mast with 360 degree rotating light head make tight spaces easily accessible. Dual power outputs illuminate a second optional head making the 9430 an adaptable and expandable illumination solution. Solid state high efficiency circuitry withstands rigorous industrial use day in and day out.

Scene Lighting


firefig

hting

equ

ipm

ent

FOX FURY - Nomad 360 Portable LED Scene Light and Area-Spot Light

Light Output / Runtime - White Light• High: 7,000 torch lumens | 3 hours• Medium: 2,100 torch lumens | 9 hours• Low: 700 torch lumens | 24 hours

What you will see• 12° spotlight / 120° area light / 360°scene light • See up to 1.7 km away

Key Features• 12 white LEDs (color temperature: 6500 K)• Deploys in under 20 seconds• 3 modes: low, medium, high• Head telescopes up to 99” (251.5 cm)• Head can rotate 340° and tilt up / down• On / Off / Mode switch at base of unit• Built-in level and leg adjustments for uneven terrain• Hold-down clamp• AC or DC charge / drive• Battery life indicator• IPX7 - waterproof up to 1m• Impact resistant• Rechargeable lithium-ion battery• Fully recharges in 7 Hours• Max height when deployed = 251.5 cm• Weight 10.5 kg

Nomad Prime Portable LED Area-Spot LightLight Output / Runtime - White Light• High: 4,000 torch lumens | 3 hours • Medium: 2,700 torch lumens | 6 hours• Low: 1,300 torch lumens | 9 hours

What you will see• 8° spotlight without diffuser lens• 120° area / scene light with diffuser lens• See up to 2 km away

Key Features• 6 white LEDs (color temperature: 6500K)• Deploys in under 20 seconds• 3 modes: low, medium, high• Head telescopes up to 95” (241 cm)• Head can rotate 340° and tilt up / down• On / Off / Mode switch at base of unit• Built-in level and leg adjustments for uneven terrain• Hold-down clamp• AC or DC charge / drive• Battery life indicator• 75 Watt power consumption• Draws 6 Amps from vehicle• Waterproof up to 1m• Impact resistant• Rechargeable lithium-ion battery• Fully recharges in 5 Hours• Weight 7.7 kg


UK 4AA eLED Zoom UK Universal Helmet Clip• Single high-intensity 2-watt LED lasts for

thousands of hours and will not break when dropped.

• Unique eLED circuitry maintains constant brighness for 80% of alkaline battery life

• Push-button thumb switch switches light between ON/OFF and high/low intensity with continuous or momentary action

• Hydrogen scrubber catalyst, polarized battery contacts and 0-psi vent minimize explosive risk from leaking batteries

• Mounts on all work helmets with accessory mounting clips

Universal Adjustable Helmet Clip

Attach a high intensity UK4AA or 3AA light to any hard hat or fire helmet for hands-free illumination! Locks in any position for perfect alignment

• Made from non-conductive glass filled nylon for super strength

• Adapters included for slotted, vertical sided and brim hard hats. Also clamps to ear muffs.

LED Lenser X21

LED 7x High End Power LED Length 395 mm Weight 1488 g Luminous flux 1000 lm* Batteries 4 x D Energy tank 120 Wh Burning life 244 h** Beam range 535 m*

LED Lenser P7

LED High End Power LED Length 133 mm Weight 192 g Luminous flux 200 lm* Batteries 4 x AAA Energy tank 7,2 Wh Burning life 64 h** Beam range 210 m*

LED Lenser X21

LED (7x) High End Power LED Length 412 mm Weight 1440 g Luminous flux 1600 lm* Batteries 4x DNiMH Energy tank 43,2 Wh Burning life 7 h** Beam range 600 m*

LED Lenser P17

LED High End Power LED Length 315,5 mm Weight 799 g Luminous flux 220 lm* Batteries 3 x D Energy tank 90,0 Wh Burning life 480 h** Beam range 330 m*

Torches


firefig

hting

equ

ipm

ent

PETZL PIXA 2

• Headlamp with wide uniform beam, designed for close-range work and for movement

• 40 Lumens Output @ 30m for 6 hours• 2 x Lighting modes• Chemical Resistant• Weight 160gm• Batteries – 2 x AA• IP67 – waterproof 1m for 30m

PETZL PIXA 1

• Headlamp with wide uniform beam, designed for close-range work

• 25 Lumens Output @ 15m for 12 hours• Weight 160gm• Batteries – 2 x AA• IP67 – waterproof 1m for 30m

PETZL PIXA 3

• Headlamp with wide, uniform beam designed for close-range work and for movement and long range vision

• 50 Lumens Output @ 55m for 3 hours

• 3 x Lighting modes

• Chemical Resistant

• Weight 160gm

• Batteries – 2 x AA

• IP67 – waterproof 1m for 30m

5:11 ATAC LED Flashlights

• Aerospace grade aluminum bodies

• Regulated circuits for maximum output

• Cree® LEDs

• Intelligent and quiet tailcap switch

• Gold-plated contacts

• Anti-roll design

PLx A2 A1 L2 L1

A2

A6

5.11 S&R Torches

Developed with input from seasoned Search & Rescue professionals to meet their requirements for dependability, simplicity, performance and the use of commonly sourced batteries. In addition to the high output searchlight, the A2 is durable enough for rugged missions where dependable performance and exceptional output contribute to operational success

S•R™ A2 and A6 Flashlights

• 237 lumens peak output for 2 hours, 15 min.

• Aerospace grade aluminum body with rubber grip surfaces and reflective inserts

• High mode with momentary/steady-on and lock-out tailcap

• Cree® XP-G2 high output LED

• Regulated circuit for maximum output

• Water resistant construction

Torches


Pulaski Axe

Combination Tool

Forest Fire Shovel, Solid Shank, FSS Approved

• Forged steel head.

• Hand sharpened, single bit edge and mattock blade.

• ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55.

• Body coated with red enamel and the cutting edges in clear lacquer to deter rust.

• 36” double bit American hickory handle. Eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening.

• Axe head is hydraulically seated onto handle and secured with a serrated aluminum wedge. The serrated shape improves bite and the aluminum choice of material is strong, lightweight and does not change size with moisture content.

• The interior detail of the eye is tapered and allows for a strong

• Made in USA.

• Wildland fire fighting tool with multiple working positions.

• Meets or exceeds latest Forest Service Specifications.

• Shovel blade and pick are made from tough, durable tool steels.

• Component parts are fully heat treated for maximum toughness and wear.

• Black enamel and phosphate finish for rust resistance.

Forest fire shovel is forged from a single piece of high carbon steel. Solid shank with forward turned steps for ease of use. Heat treated and tempered for toughness and durability. Study ash handle is driven into socket and riveted.

Shovel meets USFS specification. Made in USA.

Fire Swatter

• Flap is a masticated rubber piece of approximately 1/4’ in diameter x 12” x 15”.

• Secured to a rectangular steel structure member with a welded stud which is forced into a ferrule.

• Red enamel finish on the metal frame.

• 60” American ash handle with a ferrule for strength and durability.

• Bundled for shipment and handling

Fire Tools


firefig

hting

equ

ipm

ent

Fire Rake

McLeod Tool

Forest fire rake with a 60” handle. Produced in accordance with USDA Forest Service Specification 5100-284C dated January 1, 2000 or latest revision thereof. Sometimes referred to as “Tool, Rake and Cutting”. Durable forestry tool for chopping, raking, moving underbrush, vines, ect. Originally developed by Council Tool Company in the 1920’s working with forestry personnel. Designed for construction of fire lines during controlled burns and wildfires. Shipped knocked down.

• Triangular shaped tool steel cutting teeth (4), specially sharpened and hardened.

• Securely riveted to a tough angle iron structural member.

• Red enamel coating on body, teeth are natural steel finish coated to deter rust.

• Tamp down style handle socket. Can break down easily for storage and handling.

• 60” American ash handle. This material produces long, straight grain and provides strength, flexibility and memory. Round eye detail.

McLeod tool with a 48” handle. Produced in accordance with USDA Forest Service Specification 5100-353D, dated November 1992, or latest version thereof. Combination of a rake and a hoe used primarily for clearing brush and other surface debris and for digging in the soil to construct fire control lines on wildfires and controlled burns.

• High carbon steel blade, formed and sharpened for digging and clawing.

• Heat Treated for toughness and wear resistance.

• Black enamel finish for rust resistance.

• Enhanced ferrule joint for strength and durability.

• 48” American ash handle is strong and durable.

• Shipped knocked down, assembles in minutes.

Break apart tools

The FRSA Break apart tools are made with tough fibre glass. They come with threaded system with least amount of joints. Poles are made out of strong injection Fibre Glass Tubing. Each screw joint connection is reinforced.

Hooligan tool

The Hooligan Tool is one of the world’s most popular forcible entry tools. These heavy-duty tools were designed to pound, puncture, pry, twist, and cut all types of barriers encountered by emergency service personnel.

The head and claw are forged from high alloy steel, heat treated for maximum strength, then fitted to a 1” (2.5 cm) stress proof bar. The bar has machine grooved non-slip grips. The Hooligan Tool features

a newly designed claw that is gently curved for maximum prying leverage.

The claw opening is parallel and fits over locks, hasps and many door bars. It can also be used as a nail puller and a gas shut off during emergencies.

Fire Tools


The Manual Reel is a high quality hose reel that provides the user with an easy and user-friendly rewind for all situations. The reel is manufactured to industry standards and includes all necessary features to ensure problem free use. The reel features the most complete guarding system found on any hose reel, ensuring it is one of the safest on the market. All hose reels are powder coated aluminium and are available in a select variety of colours to suit your vehicle.

Quik Reel powered reels have been produced to take the hard work out of rewinding long and heavy lengths of hose by providing a powerful and consistent retraction that greatly assists in hose retrieval. Built using the highest quality components, the unit provides a safe, effective and user-friendly rewind every time. The reel can also be retracted using a manual handle if required.

The manual reel is available in a range of sizes; standard (model RFR2), small (model RFRA2), large (model RFRB2) or extra large (model RFRC2).

Powered hose reel specifications

• 12V or 24V DC

• Heavy duty electric motor

• 80 Amp continuous duty Relay, on off switch and push button pre wired, fitted with an Anderson plug.

• Left or right hand waterway

• 4 hose rollers

• Select range of colour choice

• Aluminium

• Reel lock

• Friction brakes

• Manual handle supplied

• Manual handle rewind

• Left or right hand waterway

• 4 hose rollers

• Hose feed at 180 degrees

• Select range of colour choice

• Aluminium

• Reel lock

• Friction brakes

RFR1 Manual Reel

Powered Hose Reel

Reels


firefig

hting

equ

ipm

ent

FT 101 Trainer Kit

FT 201 Trainer Kit

FT 401 Trainer Kit

INCLUDES:

• FT 101 TRAINER

• 2.5L MEDIUM FLUID

• 2.5L CLEANING FLUID

• 101 HEAVY DUTY TRANSIT BOX

• RADIO REMOTE CONTROL

Heat exchanger 400W Heat up time: 1 second Fail-safe thermal cut-out protection Operational time: Up to 10 minutes

Control Hand held operation Variable smoke output level

Electrical Battery charger: 100 - 240V, 50/60Hz Output voltage 12V DC@1000 mA

Measurements Size: (LxWxH): 223 x 100 x 210 mm (8,8 x 4 x 8,2 in) Weight: 5,6 kg (12,3 lbs)

Fluid System Fluid capacity: 0,25 litre Fluid consumption: 10 ml/min

Recommended fluids Trainer Fluid Medium

Accessories Remote control/radio controlled remote

INCLUDES:

• FT 201 TRAINER

• 25 LITRE HEAVY FLUID

• 2.5 LITRE CLEANING FLUID


Heat exchanger 1,000W Heat up time: 7 minutes Overheat protection: DTPD (Direct Thermal Protection Device)

Effective Coverage 500 cubic metres/min Operational time: continuous (at reduced output)

Control Remote socket: 3 pin XLR Remote cable: 5 m On-board multi-functional timer remote with level control

Electrical Power consumption: 4,5A @ 230V 9,5A @ 120V

Measurements Size: (LxWxH): 500 x 225 x 165 (20 x 9 x 6,6 in) Weight: 11 kg (24,2 lbs)

Fluid System Fluid capacity: 2,5 litre container Fluid consumption: 75 ml/min

Recommended fluids Trainer Fluid Medium and or heavy

Accessories Trainer 201/401 Ducting System (optional) - includes ducting adapter and 5m of 104mm diameter ducting. XLR extension cable 10 m. DMX Interface Controller and fully Computerised Software

INCLUDES:

• FT 401 TRAINER

• 25 LITRE HEAVY FLUID

• 2.5 LITRE CLEANING FLUID


Heat exchanger 1,500W Hi-Mass Vaporizing System

Heat up time: 8 minutes

Overheat protection: DTPD

(Direct Thermal Protection Device)

Effective Coverage 1,000 cubic metres/min Operational time: continuous (at reduced output)

Control Remote socket: 3 pin XLR Remote cable: 5 m On-board multi-functional timer remote with level control

Electrical Power consumption: 7,0A @ 230V 14,0A @ 120V

Measurements Size: (LxWxH): 685 x 345 x 225 (27 x 13,6 x 8,5 in) Weight: 19 kg (41,8 lbs)

Fluid System Fluid capacity: 9,5 litre container Fluid consumption: 150 ml/min

Recommended fluids Trainer Fluid Medium and or heavy

Accessories Trainer 201/401 Ducting System (optional) - includes ducting adapter and 5m of 104mm diameter ducting. XLR extension cable 10 m. DMX Interface Controller and fully Computerised Software

Smoke Machines


Foxfire Illuminating helmet bands

Illuminating equipment bands

Track firefighters and increase safety in smoky or dark environments with Foxfire Illuminating Helmet BandsHighlights:• Increases visibility and positional

orientation• Can be charged by any light source (sun,

artificial light, low light)• Will illuminate for hours• May be recharged repeatedly by any light

condition• Glow/illumination serves as a “light emitter”• Energy efficient, eco-friendly and no

batteries required• Made of industrial grade high temperature

resistant silicone

• Can withstand high temperatures• Flat measurements: 11.5” x 1.5”Three of the biggest risks faced by firefighters are disorientation, visibility and accountability (to both individuals and tools). Foxfire® illuminating helmet bands assist firefighters in facing these risks by improving positional orientation, making personnel easy to locate and illuminating search areas.“We used Foxfire helmet bands in a search and rescue training session. There was so much smoke you couldn’t even see your hand in front of your face. Yet we could clearly tell where our firefighters wearing the helmet bands were. It was amazing.”

Suitable for SCBA Bottles, Water Cans and MoreTrack firefighters and increase safety in smoky or dark environments with Foxfire Illuminating Equipment BandsHighlights:• Ideal for self contained breathing

apparatus (SCBA) bottles and water cans• Increases visibility and positional

orientation• Can be charged by any light source (sun,

artificial light, low light)• Will illuminate surroundings for several

hours when fully charged• May be recharged repeatedly• Glow/illumination serves as a “light

emitter”

• Energy efficient, eco-friendly and no batteries required

• Made of industrial grade high temperature resistant silicone

• Can withstand high temperatures• Available with printed unit/crew/

department identification (you may request the text you want displayed)

• Flat measurments: 8” x 3”Three of the biggest risks faced by firefighters are disorientation, visibility and accountability (to both individuals and tools). Foxfire® illuminating equipment bands assist firefighters in facing these risks by improving positional orientation, making personnel easy to locate and illuminating search areas.

Helmet Tetrahedrons and BarsIdentify your crew in total darkness with these illuminating tetrahedrons and bars.

Patented combination of high-output photoluminescence and extreme reflectivity. Foxfire tetrahedrons are high temperature resistant with a strong bonding adhesive backing.

Product Specifications

• Set of eight (8) replaces your existing reflective tetrahedrons

• High reflectivity (Reflexite’s newest prismatic film)

• High heat durability (they are built on a Nomex type fire retardant cloth)

• Advanced photoluminescence afterglow

• Strong surface bonding (3M’s adhesive)

• Patented design


firefig

hting

equ

ipm

ent

Illuminating Grip Wrap

Identify your crew and equipment with illuminating color-coded grip wrap. Provides at-a-glance identification with day-glow colors that illuminate in the darkness.Highlights:• Can be charged by any light source (sun,

artificial light, low light)• Will illuminate surroundings for several

hours when fully charged• May be recharged repeatedly• Glow/illumination serves as a “light

emitter”• Energy efficient, eco-friendly and no

batteries required• Heavy duty, made of industrial grade

reinforced silicone• Each roll is aprox. 55” which is enough

for the center of a large halligan, 6’ New York hook or two axe handles.

• May be secured in place by wrapping duct tape, electrical tape, zip tie etc on end to keep it from unraveling. Does not have adhesive so it can be re-used.

• Unique surface clings to itself and allows grip on wet or dry tools with or without gloves

• Can withstand high temperatures• Identify colors in light and dark (available

in 4 colors)• Colors help to differentiate between

different tools, roles and crew membersThree of the biggest risks faced by firefighters are disorientation, visibility and accountability (to both individuals

and tools). Foxfire® illuminating grip wrap assists firefighters in facing these risks by improving positional orientation, making both tools and personnel easy to locate and illuminating search areas. Available in four different daytime and “glow” colors , Foxfire® illuminating grip wrap enables firefighters to differentiate between different tools, crew members and responsibilities.“The grip wrap offers a lot of flexibility as it can be used and reused on many different types of tools including those with wood and fiberglass handles. I have the tape wrapped around my 4-foot roof hook and have used it on multiple fires and during training burns. Everyone is amazed how much it glows and the grip it adds to the tools.”

Illuminating All-in-One Coating Kits

Paint your tools and equipment to glow in the dark and illuminate your surroundings with Foxfire Illuminating All-in-One Coating KitsHighlights:• Paint tools and equipment to increase

visibility and positional orientation• Can be charged by any light source (sun,

artificial light, low light)• Will illuminate surroundings for up to 17

hours when fully charged• May be recharged repeatedly by any light

condition• Glow/illumination serves as a “light

emitter”• Energy efficient, eco-friendly and no

batteries required• Can withstand high temperatures• Each kit contains a two-part industrial

grade epoxy, primer, mixing and applications tools

• Contains enough product to coat a

hydrant (bonnet, caps and curb), several tool handles, air bottle or ladder tip

Three of the biggest risks faced by firefighters are disorientation, visibility and accountability (to both individuals and tools). The Foxfire® All-in-One Coating Kit assists firefighters in facing these risks by improving positional orientation, making both tools and personnel easy to locate and illuminating search areas.Do it Yourself Uses:• Tools • Hoze Nozzles • Stairs • Ladders• Helmets • Fire Extinguishers • Doors • Door Wedges • Couplings • Hydrants • Lockers • Spanners“The Foxfire illuminating glow paint is incredible. We’ve applies it to axes, hooks, halligan bars and have tested it on a fire hydrant. Foxfire has the potential to change the future of firefighting as far as accountability and safety of our crews and keeping tabs on our tools in zero light conditions.”


Service Capabilty

Programmed Maintenance and Service

FRSA offers a holistic approach to equipment supply and programmed maintenance. We understand the equipment used by emergency services is often lifesaving equipment so it’s critically important to have a structured maintenance program to support your investment. This ensures your operational capability isn’t compromised and are fully compliant with various standards and legislative requirements.

In order to provide an emergency response capability or to ensure a safe workplace we know our customers use a wide variety of equipment. The service regimes often vary and can be time consuming to coordinate with multiple vendors.

At FRSA we streamline this by working with you to implement a fully managed programmed maintenance plan. One that is cost effective and gives you back time to focus on other things. You will be comforted knowing all equipment is being managed through one vendor who will keep all your records up to date on one single data base. We provide periodical reporting on all assets managed allowing you to see all historical information at any time. This reporting will also be helpful in planning future works and budgeting for the next calendar year.

Our Technical Services team are highly trained technicians. Technicians who have a passion for the industry and have extensive experience and training across a wide variety of equipment.

The type of equipment we service includes but is not limited to;

• Self-Contained Breathing Apparatus (SCBA)

• Airline and Escape Breathing Apparatus• Cylinder Hydrostatic Testing

/ Valve Overhauls • Underground Fill Stations and

CABA Storage Stations• Compressors HP Breathing Air• Cylinder Storage Banks and Fill Stations• Gas Detection• Self-Rescuers• Road Crash Rescue Equipment• Fall Arrest / Rope Rescue Equipment • High Pressure Airbags

Hydrostatic Testing • Medical Equipment - Oxygen,

Biomedical and ambulance stretchers

Whether it’s a gas monitor needing calibration, a breathing apparatus requiring six yearly service or a compressor has been damaged in the field, the FRSA team are ready to respond.

We are proud to provide these services to our customers across Australia and South East Asia and standby our “anytime anywhere” philosophy.

Emergency Breakdown Service 24/7

Emergency services rely on their equipment being on standby all year round in the event of a major incident or natural disaster. Whilst our scheduled service visits are designed around keeping your equipment ready for deployment for the next emergency we understand breakdowns can happen anytime. FRSA’s response times are fast and we’re available 24/7.

Our technicians are trained to fault find, repair and reinstate equipment as quickly as possible with the least amount of disruption to your business operations.

If you would like to discuss your companies service requirements please contact your local FRSA representative for more information.

Note all equipment in this catalogue with symbol is a product serviceable by our company.


firefig

hting

equ

ipm

ent

SafequipLeading suppliers of technical rescue and water rescue equipment around the world.

Fat IvanFatIvan® is the World’s Only Fold Up Door Chock! A perfect tool for Emergency Services

FoxFireWhat makes Foxfire® products completely unique is the capability to serve as its own light emitter.

SITLeaders in the design & manufacture of low pressure inflatable Rescue equip-ment for Emergency Services.

Patented construction Kevlar cord reinforced high-pressure lifting bags that utilizes a state-of-the-art design.

SAVA-TechGenesisDevelopers of the most advanced and effective hydraulic road crash rescue on the market.

UnifireUnifire is the leading manufacturer of high performance rescue equipment.

ArgusArgus thermal imaging cameras offer unrivalled features, designed by the best engineers.

MicroguardMicrogard Limited is a leading manufacturer of chemical protective clothing

Biomarine Inc. is the worldwide leader in (CCBA). Makers of the Biopak 240Revolutuion.

Biomarine Inc.Nardi manufacture a high quality range of breathing air compressors for filling SCBA and SCUBA cylinders.

Nardi Compressors Grace IndustriesManufacturer of Man Down Alarms, Lone Worker / Confined space alarms, and telemetry systems.

Elkhart BrassThe industry’s most experienced manufacturer of innovative fire fighting and fire protection equipment.

ScottyFireThe Scotty trademark has become recognized to mean one thing - product excellence

EnforcerThe Enforcer 60 portable CAFS is capable of producing up to 1200 U.S. gallons of finished foam.

Fire Service PlusGlobal leader in environmentally friendly, multiclass fire fighting foam agents with “FireAde 2000”.

ALLIANCE PARTNERSOur alliance partners are global leaders in innovation and quality and are setting new benchmarks in the Emergency Services Industry.

GearKeeperGear Keeper retractable tether systems are high-end, precision-made tools for people who work – or play – hard.

O-TwoInovators in Medical and First Aid equipment of the highest calibre worldwide.

PAX bags are tried, tested & assessed in every way, offering highest quality emergency bags, packs & accessories.

PAX Bags ZOLLGlobal leader in cardiac care products: AED Plus, AED Pro, E-Series Defibrillator, Autopulse.

Documents

Hydroarbon Suspension Technology - FRSA · Hydroarbon Suspension Technology The ltimate Fire uencher ed. firefighting equipment - portable 1300 4 RESCUE (737283) firefighting equipment