LMF LaminarMasterFlow SYSTEM Reference Book LMF LaminarMasterFlow SYSTEM Reference Book This reference

  • View
    2

  • Download
    0

Embed Size (px)

Text of LMF LaminarMasterFlow SYSTEM Reference Book LMF LaminarMasterFlow SYSTEM Reference Book This...

  • LMF

    LaminarMasterFlow SYSTEM

    Reference Book

    This reference book is solely aimed to qualified employees, who have achieved the necessary knowledge with regard to language

    understanding and contents.

    The separate manual includes all information relevant for the operator.

    The following text is a translation of the source document from the German language.

    *** VERSION 5.8 *** State: 08/25/2011

  • Reference Manual LMF

    Page ii LMF V5.8

    Copyright

    The copyright of this reference book and possibly of other parts of the delivered documentation remains in the hands of TetraTec Instruments GmbH Gewerbestr. 8 D-71144 Steinenbronn This reference book and possibly other parts of the documentation is intended for the operator and its staff only. Included are regulations and notes, which must not be • duplicated • published • or otherwise communicated either partly or completely. Violations may result in prosecution.

    Service

    If there are any questions exceeding the contents of the provided product information, you may contact us at the address indicated above. Telephone: 0049 - 7157 / 5387-0 Telefax: 0049 - 7157 / 5387-10 Email: info@tetratec.de In addition, you will find more information and data sheets of other products on our homepage: You are invited to visit www.tetratec.de.

  • Reference Manual LMF

    LMF V5.8 Page iii

    Table of Contents

    1 INTRODUCTION ............................................................................................................................ 1

    1.1 Product Description ..................................................................................................................1 1.1.1 Hardware.................................................................................................................................1 1.1.2 Software ..................................................................................................................................1

    1.2 Intended Use ..............................................................................................................................2

    1.3 Warranty and Liability ...............................................................................................................3

    2 SAFETY.......................................................................................................................................... 4

    2.1 Basic Safety Instructions .........................................................................................................4 2.1.1 Responsibility of the Operator.................................................................................................4 2.1.2 Responsibility of the Staff........................................................................................................4 2.1.3 Inevitable Remaining Dangers by the Equipment...................................................................5 2.1.4 Switch-on characteristics with running PLC............................................................................6

    2.2 Notes for set-up, installation and operation of the equipment.............................................6 2.2.1 Set-up, Installation ..................................................................................................................6 2.2.2 Operating Conditions, Ambient Conditions .............................................................................6 2.2.3 Electric power supply / electrical connection ..........................................................................6 2.2.4 Cleaning of the Device ............................................................................................................7 2.2.5 Calibration, Measuring Accuracy ............................................................................................7 2.2.6 Structural Changes on Devices and Measuring Sections.......................................................7 2.2.7 Limit parameter access ...........................................................................................................7

    3 COMPONENTS OF A LMF SYSTEM ............................................................................................ 9

    3.1 Overview.....................................................................................................................................9

    3.2 Primary elements.....................................................................................................................10 3.2.1 Active pressure transmitter ...................................................................................................10 3.2.2 Counter..................................................................................................................................11 3.2.3 Miscellaneous .......................................................................................................................11

    4 OPERATIONAL CONTROLS ...................................................................................................... 12

    4.1 Front panel operational controls of Controller S320 ...........................................................12

    4.2 Interfaces of Controller S320 .................................................................................................14

    4.3 Additional front panel operational controls with installation in a recumbent 19“ cabinet15

    4.4 Back side interfaces with installation in a recumbent 19“ cabinet ....................................16

    5 INTERFACES FOR REMOTE CONTROL................................................................................... 17

    5.1 Set up RS232 interface............................................................................................................17 5.1.1 Default settings in the configuration file: ...............................................................................17 5.1.2 Interface settings in the terminal program.............................................................................18 5.1.3 Test function of the serial interface .......................................................................................18 5.1.4 Test function of the link interface ..........................................................................................18

    5.2 Set up network interface.........................................................................................................18 5.2.1 Enter IP address ...................................................................................................................18 5.2.2 Adjust port number................................................................................................................18 5.2.3 Set IP address and port number in the terminal program.....................................................19 5.2.4 Test connection.....................................................................................................................19 5.2.5 Restrictions of access ...........................................................................................................19

  • Reference Manual LMF

    Page iv LMF V5.8

    5.3 Query and change of parameters ..........................................................................................21 5.3.1 Physical units ........................................................................................................................21 5.3.2 Query parameters .................................................................................................................21 5.3.3 Change parameters ..............................................................................................................21

    5.4 Virtual inputs and outputs......................................................................................................23 5.4.1 Communication .....................................................................................................................23 5.4.2 Timeouts................................................................................................................................23 5.4.3 Access control .......................................................................................................................24

    5.5 List of the remote control commands of the COMM interface............................................25 5.5.1 CONTROL.............................................................................................................................25 5.5.2 CTD.......................................................................................................................................25 5.5.3 CTI.........................................................................................................................................25 5.5.4 CVP .......................................................................................................................................25 5.5.5 DATE.....................................................................................................................................26 5.5.6 DEFAULTS............................................................................................................................26 5.5.7 DISCARD ..............................................................................................................................26 5.5.8 DLIST ................................................................................................................................