4
www.resemin.com MUKI LHP Production long hole rig for narrow veins MUKI LHP is an electro-hydraulic rig for long hole drilling, it has tilt, rotation and pendulum arm, perform precise and smooth movements for parallel holding. Long hole drilling feed 2500 series with 2 Stingers and hydraulic clamp. Equipped with Montabert drifter HC 50 (13 kW). Full 360°, horizontal coverage with parallel holding is 1.44 m; maximum length of drilling up to 15 m, diameters up to 74 mm bit, Reamer 127 mm. Chassis for heavy duty application, articulated 4WD, self-propelled with diesel, electro hydraulic system for drilling. Applications: • Sub Level Caving, benching • Sub Level Stoping • VCR and cable bolting

MUKI LHP - Gladiator Equipment · 2016. 7. 7. · MUKI LHP Production long hole rig for narrow veins MUKI LHP is an electro-hydraulic rig for long hole drilling, it has tilt, rotation

  • Upload
    others

  • View
    4

  • Download
    0

Embed Size (px)

Citation preview

Page 1: MUKI LHP - Gladiator Equipment · 2016. 7. 7. · MUKI LHP Production long hole rig for narrow veins MUKI LHP is an electro-hydraulic rig for long hole drilling, it has tilt, rotation

www.resemin.com

MUKI LHPProduction long hole rig for narrow veins

MUKI LHP is an electro-hydraulic rig for long hole drilling, it has tilt, rotation and pendulum arm, perform precise and smooth movements for parallel holding.

Long hole drilling feed 2500 series with 2 Stingers and hydraulic clamp. Equipped with Montabert drifter HC 50 (13 kW).

Full 360°, horizontal coverage with parallel holding is 1.44 m; maximum length of drilling up to 15 m, diameters up to 74 mm bit, Reamer 127 mm.Chassis for heavy duty application, articulated 4WD, self-propelled with diesel, electro hydraulic system for drilling.

Applications:

• Sub Level Caving, benching• Sub Level Stoping• VCR and cable bolting

Page 2: MUKI LHP - Gladiator Equipment · 2016. 7. 7. · MUKI LHP Production long hole rig for narrow veins MUKI LHP is an electro-hydraulic rig for long hole drilling, it has tilt, rotation

www.resemin.com

Muki LHP Technical specifications

SPECIFICATIONS

DRIFTER• Model• Percussion Power• Percussion pressure• Frequency Percussion• Rotation speed• Rotation Torque• Hole diameter• Lub air consumption• Lub oil consumption• Water consumption• Shank Adapter• Weight• Length with shank

Montabert HC5013 kW

130 Bar62 Hz

0 - 195 rpm415 Nm

33 - 64 mm83.3 l/s (to 2.5 bar)

0.8 cc/min25 l/min (to 8 bar)

R32 Female102 kg

855 mm

FEED• Model• Advance drilling• Feed extension• Hydraulic clamp• Standard Feed• Options• Two Stinger to stabilize while

drilling• Digital inclinometer for measuring

angles

CARRIER• Model• Diesel Engine• Power• Exhaust catalyst• Transmission• Hydrostactic pump• Positioning pump• Rear axle Oscillating• Service brakes• Emergency and parking brakes

• Tyres• Steering (articulated carrier)• Hydraulic jacks • Battery• Electric system• Gradeability • Canopy• Tramming lights

• Centralized Lubrication System• Drilling Lubrication System• Automatic fire suppression

system• Fire extinguisher• High-pressure washing system• Reel grease gun

C22.1

Deutz BF4L201155,1 kW @ 2300 rpm

StandardHydrostatic

Poclain, MSE 08Rexroth

± 8°Separate

SAHR (Spring Applied Hydraulic Release)

7.50 x R15±38°

2 extendable front2x12 V, 90 Ah

24 VDC15%

FOPS / ROPS8X, LED N44, 50W,

6700 lm, 24 VSKFSKF

ANSUL, 6 nozzles 1x5 lb, Type ABC

RE 2500 Series

Hydraulic motor and chain400 mmBull 1214 ft rods

3, 5 ft rods

Transtronic

Page 3: MUKI LHP - Gladiator Equipment · 2016. 7. 7. · MUKI LHP Production long hole rig for narrow veins MUKI LHP is an electro-hydraulic rig for long hole drilling, it has tilt, rotation

www.resemin.com

Muki LHP Technical specifications

PENDULUM ARM• Angle tilt• Swing angle• Rotation angle• Hydraulic cylinders

+65°/ -20°± 30°360°

Parker

HYDRAULIC CONTROL SYSTEM• Direct Control Valve• Percussion pump (compensated

pressure)• Rotation Pump • Work pressure• Hydraulic oil tank• Hydraulic return filter• Hydraulic high filter • Saturation hydraulic filter

indicator • Indicator of low oil• Indicator temperature oil

WATER AND AIR SYSTEM• Compressor• Maximum capacity• Work pressure• Water pump with hydraulic

motor• Maximum flow at 8 Bar• Minimum inlet pressure• Cooler Thermal Transfer

AC - LE3 3-10 UV5.1 l/s (10.8 cfm)

3 Bar

Grundfoss, CR5 - 96.9 m3/h

2 BarEK 1018T, 80 GPM, 34 Bar

Parker K18

Rexroth A10V071Parker, P315 A

180 bar130 l

Parker, 10µParker, 20µ

ParkerHydacHydac

ELECTRIC SYSTEM• Electric motor• Voltage• Frecuency• Starting method• Option to 1000 VAC• Overload protection and

ground fault• Percussion hour meter• Phase sequence indicator• Battery charger• Electric transformer• Work Lights• Electric wire reel• Electric wire• Protection degree

ABB - 55kW (75 HP)

380 - 440 - 550 - 690 -1000 VAC50 - 60 Hz

Star - DeltaDirect start

Schneider, Module VIGIIn the control panel

Siemens32 VAC, 300W, 13A

1.5 kVA2X, LED N44, 50W, 6700 lm, 24 V

60 mGGC - 3X2 - AWG (35 mm)

IP 55

Page 4: MUKI LHP - Gladiator Equipment · 2016. 7. 7. · MUKI LHP Production long hole rig for narrow veins MUKI LHP is an electro-hydraulic rig for long hole drilling, it has tilt, rotation

www.resemin.com

Muki LHP Technical specifications

DIMENSIONS

Rev

. 160

606

©

Cop

yrig

ht 2

016

RE

SE

MIN

. Spe

cific

atio

ns a

nd e

quip

men

t are

sub

ject

to c

hang

e w

ithou

t fur

ther

not

ice.

Total Weight 6,790 Kg.

COVERAGE AREA TURN RADIO