Information procedure Page 1
Monthly Notifications Register
Notifications registered at CCMC from 2011-10-01 to 2011-10-31
Register issued on : 2011-11-02
A list of subsectors can be found at the end of this document.
Information procedure Page 2
Monthly Notifications Register
Notifications registered at CCMC from 2011-10-01 to 2011-10-31
Sector A : SERVICES
Register issued on : 2011-11-02
Page 3Subsector A99: UNDETERMINED
Subsector : A99 Registration Date : 2011-10-03Organization : BSICountry : United KingdomProject ID : 01102478/0001 Project EstablishedICS :National Ref : BS 8581Title : Exchanging course related information. Course advertising profile
Relatedness :National : New
Subsector : A99 Registration Date : 2011-10-03Organization : BSICountry : United KingdomProject ID : 01102480/0001 Project EstablishedICS :National Ref : BS 8415:2005+A2Title : Monuments within burial grounds and memorial sites. Specification. Amendment
Relatedness :National : New
Subsector : A99 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175957/0001 Project EstablishedICS :National Ref : PR NF X50-823Title : Industrial tourism - General quality service requirements
Relatedness :National : New
Subsector : A99 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175958/0001 Project EstablishedICS :National Ref : PR NF X50-842Title : Economic relations between the protected area and adapted and principals
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 4
Monthly Notifications Register
Notifications registered at CCMC from 2011-10-01 to 2011-10-31
Sector B : BUILDING AND CONSTRUCTION
Register issued on : 2011-11-02
Page 5Subsector B02: STRUCTURES
Subsector : B02 Registration Date : 2011-10-27Organization : UNICountry : ItalyProject ID : 0206D120/0001 Project EstablishedICS : 93.025National Ref : E0206D120Title : Water wells - Design and constructionScope : This standard defines the general requirements to be fulfilled for what that matters wells
designing and building; in particular this standard deals with: - geological and hydro geological background check in the area; - litho-stratigraphic data analysis; - aquifer hydraulic parameters evaluation; - evaluation of the client's water needs; - designing; - individuation of the perforation technique compatible with both the target and the environmental problems; - well dimensional verification and technical compatibility with the scheduled procedures; - assistance to perforation; - advance test; - collecting of stratigraphic, hydraulic and perforation logs; - well's working designing; - environmental safety of the operations; - flow tests and working test of the well - building site; - handling of perforation residuals; - draining waters; - different perforation techniques; - mud technology; - parameters of the different perforation techniques; - terrain sampling; - advance test; - tubular products; - welding, tightening, centralizers; - replenishment and insulating products; - replenishment products laying; - cementation; - development techniques; - turbidity and sand content; - raising implants for flow tests; - flow tests execution; - testing; - perforation report; - correspondance certificate to design and standards.
Relatedness :National : New
Subsector : B02 Registration Date : 2011-10-31Organization : BDSCountry : Bulgaria Latest Date for Comments : 2012-12-31
Project ID : BG056050/0001Draft for public
enquiry
Page 6
ICS :91.010.30, 91.080.10, 91.080.40, 93.040
National Ref : BDS EN 1994-2:2006/prNATitle : Eurocode 4 - Design of composite steen and concrete structures - Part 2: General rules
and rules for bridges - National AnnexScope : BDS EN 1994-2:2006/prNA establishes national determined parameters for design of
structures according BDS EN 1994-2 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1994-2:2006
Subsector : B02 Registration Date : 2011-10-31Organization : BDSCountry : Bulgaria Latest Date for Comments : 2012-12-31Project ID : BG056051/0001 Draft for public enquiryICS : 53.020.20, 91.010.30, 91.080.10National Ref : BDS EN 1993-6:2007/prNATitle : Eurocode 3 - Design of steel structures - Part 6: Crane supporting structures - National
AnnexScope : BDS EN 1993-6:2007/prNA establishes national determined parameters for design of
structures according BDS EN 1993-6 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1993-6:2007
** End of Subsector **
Subsector B03: CONCRETE
Subsector : B03 Registration Date : 2011-10-18Organization : SUTNCountry : SlovakiaProject ID : 72103111/0001 Project EstablishedICS : 91.100.60National Ref : STN 72 7221-3Title : Thermal insulation products for building application – Part 2: Factory made products of
extruded polystyrene (XPS)Scope : This standard determines required values of properties of factory made products of
extruded polystyrene (XPS) by classes, levels or threshold values. It is applied for design and execution of buildings, standard types of constructions and categories of application.
Relatedness :National : New
Subsector : B03 Registration Date : 2011-10-31Organization : UNMZ Draft Issue Date : 2012-02-01Country : Czech Republic Latest Date for Comments : 2012-03-31Project ID : 73011111/0001 Project EstablishedICS :National Ref :Title : Execution of concrete structuresScope : The aim of the modification of National Annex on CSN EN 13670 is unification of
contemporary legislation and related Czech Standards. Use of new information for execution of concrete structures.
Page 7
Relatedness :National : REV/AMD CSN EN 13670 (2010)
Subsector : B03 Registration Date : 2011-10-03Organization : AENORCountry : Spain Latest Date for Comments : 2011-11-12Project ID : P0036966/0002 Draft for public enquiryICS :National Ref : PNE-EN 12390-8:2009/1MTitle : Testing hardened concrete - Part 8: Depth of penetration of water under pressureScope : This Standard includes a national annex which specifies a method for determining the mean
depth of penetration of water under pressure on hardened concrete.
Relatedness :National : New
** End of Subsector **
Subsector B04: CEMENT
Subsector : B04 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175892/0001 Project EstablishedICS :National Ref : PR NF S61-937-11Title : Fire safety equipment - Operated safety systems - Part 11: Transfer fire-valves
Relatedness :National : New
Subsector : B04 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038479/0001 Project EstablishedICS :National Ref : PNE 80305Title : White cements.Scope : This standard revises the current standard of white cements to include new requirement for
the colour of these cements. The reference standards have also been updated.
Relatedness :National : REV/AMD UNE 80305:2011
Subsector : B04 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038480/0001 Project EstablishedICS :National Ref : PNE 80117Title : Methods of testing cements. Physical analysis. Colour determination in white cements.
Page 8
Scope : This standard revises the current version concerning the determination of the colour.
Relatedness :National : REV/AMD UNE 80117:2001
** End of Subsector **
Subsector B05: FIRE TESTS
Subsector : B05 Registration Date : 2011-10-31Organization : UNMZ Draft Issue Date : 2012-04-01Country : Czech Republic Latest Date for Comments : 2012-07-31Project ID : 73011411/0001 Project EstablishedICS :National Ref :Title : Fire protection of buildings - UndergroundScope : The aim of the new standard is unification of requirements for fire safety engineering of
underground
Relatedness :National : New
** End of Subsector **
Subsector B07: GLASS
Subsector : B07 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 00515879/0001 Project EstablishedICS :National Ref : 00515879Title : Glass in Building - Design and construction rules - Part 3:Point fixed glazing
Relatedness :National : New
Subsector : B07 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 00515880/0001 Project EstablishedICS :National Ref : 00515880Title : Glass in Building - Design and construction rules - Part 4: Additional requirements for
anti-drop device
Relatedness :National : New
Subsector : B07 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 00515881/0001 Project EstablishedICS :
Page 9
National Ref : 00515881Title : Glass in Building - Design and construction rules - Part 5: Accessible glazing
Relatedness :National : New
** End of Subsector **
Subsector B09: THERMAL MATTERS
Subsector : B09 Registration Date : 2011-10-27Organization : UNICountry : ItalyProject ID : 0205C593/0001 Project EstablishedICS : 91.140.30National Ref : E0205C593Title : Energy performance of buildings - Part 3: Evaluation of primary energy need and of
system efficiencies for space cooling Scope : The technical specification provides data and methods for evaluating:
- systems efficiencies and the energy need for air conditioning systems - primary energy need for air conditioning systems The technical specification only applies to stationary systems for air conditioning with electrically operated machinery or absorption machinery The technical specification applies to newly design systems, retrofitting or to existing systems: - for cooling only; - for air conditioning systems The technical specification does not apply to individual components of the summer air conditioning systems for which instead refers to the specific product standards.
Relatedness :National : REV/AMD UNI/TS 11300-3:2010
** End of Subsector **
Subsector B11: METAL STRUCTURES
Subsector : B11 Registration Date : 2011-10-04Organization : SNV Draft Issue Date : 2011-09-23Country : Switzerland Latest Date for Comments : 2011-11-15Project ID : CH110025/0001 Draft for public enquiryICS : 91.080.10National Ref : SIA 263Title : Steel structures
Relatedness :National : REV/AMD SIA 263 (2003)
Subsector : B11 Registration Date : 2011-10-04Organization : SNV Draft Issue Date : 2011-09-23Country : Switzerland Latest Date for Comments : 2011-11-15Project ID : CH110026/0001 Draft for public enquiryICS : 91.080.10National Ref : SIA 263/1Title : Steel Structures - Supplementary Specifications
Page 10
Relatedness :National : REV/AMD SIA 263/1 (2003)
** End of Subsector **
Subsector B12: MASONRY
Subsector : B12 Registration Date : 2011-10-26Organization : LSTCountry : LithuaniaProject ID : 10001011/0001 Project EstablishedICS : 91.100.10National Ref :Title : Mortar. Test methods. Determination of frost resistance of plaster and other finishes on
one sided freezingScope : This Lithuanian standard specifies the one-sided freezing method of determining the frost
resistance of concrete, ceramic and silicate blocks, bricks, reinforced concrete and structural elements with different strains of plaster and any (ceramic and glass tiles, natural stone slabs and etc.) inorganic finishing layers and identifies the operating conditions of the category.
Relatedness :National : New
** End of Subsector **
Subsector B19: CERAMIC TILES
Subsector : B19 Registration Date : 2011-10-03Organization : BSICountry : United KingdomProject ID : 01102570/0001 Project EstablishedICS :National Ref : BS 5385-1Title : Wall and floor tiling. Part 1. Design and installation of ceramic, natural stone and mosaic
wall tiling in normal internal conditions. Code of practice
Relatedness :National : New
Subsector : B19 Registration Date : 2011-10-03Organization : BSICountry : United KingdomProject ID : 01102571/0001 Project EstablishedICS :National Ref : BS 5385-3Title : Wall and floor tiling. Part 3. Design and installation of internal and external ceramic and
mosaic floor tiling in normal conditions. Code of practice
Relatedness :National : New
Subsector : B19 Registration Date : 2011-10-03
Page 11
Organization : BSICountry : United KingdomProject ID : 01102572/0001 Project EstablishedICS :National Ref : BS 5385-4Title : Wall and floor tiling. Part 4. Design and installation of ceramic and mosaic tiling in
special conditions. Code of practice
Relatedness :National : New
Subsector : B19 Registration Date : 2011-10-03Organization : BSICountry : United KingdomProject ID : 01102573/0001 Project EstablishedICS :National Ref : BS 5385-5Title : Wall and floor tiling. Part 5. Design and installation of terrazzo, natural stone and
agglomerated stone tile and slab flooring. Code of practice
Relatedness :National : New
** End of Subsector **
Subsector B20: DRAINAGE EQUIPMENT
Subsector : B20 (Secondary Subsector)
Registration Date : 2011-10-03
Organization : BSICountry : United KingdomProject ID : 01102479/0001 Project EstablishedICS :National Ref : BS 8582Title : Code of practice for surface water flood risk management
Relatedness :National : New
Subsector : B20 Registration Date : 2011-10-04Organization : SNV Draft Issue Date : 2011-09-30Country : Switzerland Latest Date for Comments : 2011-12-02Project ID : CH110028/0001 Draft for public enquiryICS : 91.140.80National Ref : SN 592000Title : Building drainage - planning and execution
Relatedness :National : REV/AMD SN 592000 (2002)
** End of Subsector **
Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT
Page 12
Subsector : B25 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 03200578/0001 Project EstablishedICS :National Ref : 03200578Title : Hose assemblies of stainless steel for gas - Safety requirements, testing, marking
Relatedness :National : New
** End of Subsector **
Subsector B26: ROAD BUILDING AND MAINTENANCE
Subsector : B26 Registration Date : 2011-10-05Organization : AENORCountry : Spain Latest Date for Comments : 2011-11-14Project ID : P0038110/0002 Draft for public enquiryICS :National Ref : PNE 135334Title : Vertical signs. Retroreflective sheetings with glass beads. Characteristics and test
methodsScope : This project revises the previous version (which specifies the characteristics and test
methods for retroreflective sheetings with glass beads used in vertical signs) in order to align it with the corresponding European standard.
Relatedness :National : REV/AMD UNE 135334:2010
Subsector : B26 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038341/0001 Project EstablishedICS :National Ref : PNE 135340:2010/1MTitle : Vertical signs: Microprismatic polymeric retroreflecting sheetings. Characteristics and
test methods.Scope : This modification to the original standard incorporates the requirement to be applied to
colour sheetings obtained by screen printing.
Relatedness :National : REV/AMD UNE 135340:2010
** End of Subsector **
Subsector B27: WATERPROOFING MATERIALS
Subsector : B27 Registration Date : 2011-10-12Organization : ASICountry : AustriaProject ID : 00024179/0001 Project EstablishedICS : 91.060.20National Ref : ÖNORM B 3418Title : Design and construction of snow protection systems on roofs
Page 13
Scope : This Austrian Standard regulates the design and construction of snow protection systems for all sloped or curved roofs up to a slope of roof of 60° and with all roofing and waterproofing. The snow protection systems are against the sliding of snow and ice (calculated with ÖNORM B 1991-1-3 and EN 1991-1-3) and are fixed as protection for the roofings and waterproofing. This Austrian Standard refers to the execution of various types of snow protection systems, which have to be adapted to the roof substructure and the roofing and applicable for the different combinations.
Relatedness :National : New
Subsector : B27 Registration Date : 2011-10-04Organization : SNV Draft Issue Date : 2011-09-23Country : Switzerland Latest Date for Comments : 2011-11-30Project ID : CH110027/0001 Draft for public enquiryICS : 91.100.50National Ref : SIA 281Title : Waterproof sheeting
Relatedness :National : REV/AMD SIA 281 (2006)
** End of Subsector **
Subsector B30: FLOOR AND SURFACING
Subsector : B30 (Secondary Subsector)
Registration Date : 2011-10-03
Organization : BSICountry : United KingdomProject ID : 01102573/0001 Project EstablishedICS :National Ref : BS 5385-5Title : Wall and floor tiling. Part 5. Design and installation of terrazzo, natural stone and
agglomerated stone tile and slab flooring. Code of practice
Relatedness :National : New
** End of Subsector **
Subsector B32: PRECAST CONCRETE PRODUCTS
Subsector : B32 Registration Date : 2011-10-31Organization : UNMZ Draft Issue Date : 2012-02-01Country : Czech Republic Latest Date for Comments : 2012-03-31Project ID : 73011211/0001 Project EstablishedICS :National Ref :Title : Prefabricated reinforced components of lightweight aggregate concrete with open
structure with structural or non-structural reinforcementScope : The aim of the completion of National Annex on CSN EN 1520 ed. 2 is use of new
information for prefabricated reinforced components of lightweight aggregate concrete with open structure
Page 14
Relatedness :National : REV/AMD CSN EN 1520 ed.2 (2011)
** End of Subsector **
Subsector B99: UNDETERMINED
Subsector : B99 Registration Date : 2011-10-18Organization : SIS Draft Issue Date : 2011-10-18Country : Sweden Latest Date for Comments : 2011-12-18Project ID : 00627801/0001 Draft for public enquiryICS : 03.080.20National Ref : 627801Title : Cleaning quality - System for the establishment and assessment for cleaning qualityScope : This standard is a Swedish translation of the Internordic standard INSTA 800:2010. The
system to describe and evaluate cleaning quality according to the framework laid down in EN 13549:2000, prepared by the dormant Technical committee CEN/TC 328 - Standard Measurement System for Cleaning Performance. The standard is the result of a collaborative effort of representatives from cleaning contractors, public and private property owners, empoyers' associations, research institutes and trade unions in Denmark Sweden and Norway
Relatedness :National : New
Subsector : B99 Registration Date : 2011-10-03Organization : BSICountry : United KingdomProject ID : 01102479/0001 Project EstablishedICS :National Ref : BS 8582Title : Code of practice for surface water flood risk management
Relatedness :National : New
Subsector : B99 (Secondary Subsector)
Registration Date : 2011-10-03
Organization : BSICountry : United KingdomProject ID : 01102480/0001 Project EstablishedICS :National Ref : BS 8415:2005+A2Title : Monuments within burial grounds and memorial sites. Specification. Amendment
Relatedness :National : New
Subsector : B99 Registration Date : 2011-10-03Organization : BSICountry : United Kingdom
Page 15
Project ID : 01102568/0001 Project EstablishedICS :National Ref : BS 3632Title : Specification for residential park homes
Relatedness :National : New
Subsector : B99 Registration Date : 2011-10-31Organization : UNMZCountry : Czech RepublicProject ID : 73009411/0001 Project EstablishedICS :National Ref :Title : Dressing rooms and facilities for hygieneScope : The aim of this revision is to update the content concerning mainly accessibility, but also
space requirements and relation to legislation.
Relatedness :National : REV/AMD CSN 73 4108
Subsector : B99 Registration Date : 2011-10-04Organization : SNV Draft Issue Date : 2011-09-23Country : Switzerland Latest Date for Comments : 2011-11-30Project ID : CH110023/0001 Draft for public enquiryICS : 91.060.20National Ref : SIA 312Title : Greening of rooftops
Relatedness :National : New
Subsector : B99 Registration Date : 2011-10-04Organization : SNV Draft Issue Date : 2011-09-23Country : Switzerland Latest Date for Comments : 2011-11-30Project ID : CH110024/0001 Draft for public enquiryICS : 91.060.20National Ref : SIA 118/312Title : General conditions for greening of rooftops
Relatedness :National : New
Subsector : B99 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA176218/0001 Project EstablishedICS :National Ref : NF P14-010Title : Sustainable Development in Business Districts - Part 1 : General Principles
Relatedness :
Page 16
National : New
** End of Subsector **
** End of Sector **
Information procedure Page 17
Monthly Notifications Register
Notifications registered at CCMC from 2011-10-01 to 2011-10-31
Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS
Register issued on : 2011-11-02
Page 18Subsector C01: Food products
Subsector : C01 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 05701563/0001 Project EstablishedICS :National Ref : 05701563Title : Bake-off-Station in food retailing - Hygienic requirements for design and handling of a
bake-off-station in food retailing
Relatedness :National : New
Subsector : C01 Registration Date : 2011-10-05Organization : NENCountry : NetherlandsProject ID : 50001683/0001 Project EstablishedICS : 67.100.10National Ref : NEN 6821:2011 nlTitle : Pasteurised milk and liquid milk products - Determination of contaminating bacteriaScope : This standard describes a method for the detection of contaminating bacteria in
pasteurised milk and non-acid milk products.
Relatedness :National : New
Subsector : C01 Registration Date : 2011-10-04Organization : UNMZ Draft Issue Date : 2011-10-30Country : Czech Republic Latest Date for Comments : 2011-11-30Project ID : 56000811/0001 Published StandardICS :National Ref :Title : Guides of good hygiene and manufacture practice - Eggs and egg productsScope : This technical standard provides rules and recommendations for implementation and
compliance with the principles of good hygiene and manufacturing practices in the production of eggs and egg products during manufacturing.
Relatedness :National : REV/AMD CSN 56 9603:2006
Subsector : C01 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175889/0001 Project EstablishedICS :National Ref : PR NF V09-502Title : Sensory analysis - General guidance for the control, by sensory analysis, of the quality
of a product during its processing
Relatedness :National : New
Page 19
Subsector : C01 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175890/0001 Project EstablishedICS :National Ref : PR NF U47-105Title : Animal health analysis methods - Isolation and identification of Brucella spp., except B.
ovis and B. canis
Relatedness :National : New
Subsector : C01 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175891/0001 Project EstablishedICS :National Ref : PR NF U47-008Title : Animal health analysis methods - Detection of antibodies against Ovine epididymitis by
the Complement Fixation Test
Relatedness :National : New
Subsector : C01 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175893/0001 Project EstablishedICS :National Ref : PR NF U47-310Title : Animal health analysis methods - Biological reagent control for the immunological
techniques used in animal health
Relatedness :National : New
** End of Subsector **
Subsector C03: CHEMISTRY
Subsector : C03 Registration Date : 2011-10-03Organization : AENORCountry : Spain Latest Date for Comments : 2011-11-02Project ID : P0034419/0002 Draft for public enquiryICS :National Ref : PNE 84766Title : Cosmetic raw materials. Plant extracts. Hydroglycolic extract cucumber (Cucumis
sativus L.)Scope : This standard determines the specifications required by the hydroglycolic extract of
cucumber in cosmetic uses.
Relatedness :National : New
Page 20
Subsector : C03 Registration Date : 2011-10-03Organization : AENORCountry : Spain Latest Date for Comments : 2011-11-12Project ID : P0035816/0002 Draft for public enquiryICS :National Ref : PNE 84771Title : Cosmetic raw materials. Plant extracts. Hydroglycolic extract nasturtium (Tropaelum
majus L.)Scope : This standard establishes the specifications required by the hydroglycolic extract of
nasturtium (Tropaelum majus L.) in cosmetic uses.
Relatedness :National : New
Subsector : C03 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038347/0001 Project EstablishedICS :National Ref : PNE 84660Title : Cosmetic raw materials. Plant extracts. Oat hydroglycolic extract (Avena sativa L.)Scope : This standard determines the specifications required by the OAT HYDROGLYCOLIC
EXTRACT in cosmetic uses.
Relatedness :National : REV/AMD UNE 84660:2006
Subsector : C03 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038348/0001 Project EstablishedICS :National Ref : PNE 84658Title : Cosmetic raw materials. Plant extracts. Bladderwrack hydroglycolic extrac (Fucus
vesiculosus L.)Scope : This standard determines the specifications required by the bladderwrach hydroglycolic
extract in cosmetic uses.
Relatedness :National : REV/AMD UNE 84658:2006
Subsector : C03 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038349/0001 Project EstablishedICS :National Ref : PNE 84659Title : Cosmetic raw materials. Plant extracts. Butchersbroom hydroglycolic extract (Ruscus
aculeatus L.)Scope : This standard determines the specifications required by the butchersbroom hydroglycolic
extract in cosmetic uses.
Relatedness :
Page 21
National : REV/AMD UNE 84659:2006
Subsector : C03 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038500/0001 Project EstablishedICS :National Ref : PNE 84719Title : Cosmetic raw materials. Dentifrices. Tetrapotassium pyrophosphate. Determination of
phosphorus pentoxide content.Scope : This standard specifies a method for the determination of the content of phosphorous
pentoxide used in dentifrices.
Relatedness :National : New
** End of Subsector **
Subsector C04: LABORATORY GLASSWARE
Subsector : C04 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175959/0001 Project EstablishedICS :National Ref : PR NF X15-221Title : Emergency safety showers - Part 5 : Plumbed-in body showers and water tank showers
for sites other than laboratories
Relatedness :National : New
** End of Subsector **
Subsector C13: FERTILIZERS
Subsector : C13 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175953/0001 Project EstablishedICS :National Ref : PR NFU42-002-1Title : Fertilizers - Fertilizers with declared micronutrient(s) content(s) for application to the soil
- Part 1 : micronutrient(s) under mineral chemical combination(s) form, exclusively
Relatedness :National : New
Subsector : C13 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175954/0001 Project EstablishedICS :National Ref : PR NFU42-003-1
Page 22
Title : Fertilizers - Fertilizers with declared micronutrient(s) content(s) for leaf spraying - Part 1 : micronutrient(s) under mineral chemical combination(s) form, exclusively
Relatedness :National : New
** End of Subsector **
Subsector C17: TREES AND PLANTS
Subsector : C17 Registration Date : 2011-10-17Organization : SUTNCountry : SlovakiaProject ID : 48000111/0001 Project EstablishedICS : 13.020.01, 65.020.99, 65.060.80National Ref : STN 48 2711Title : Forest protection. Forest protection against main bark borers on spruceScope : The object of the standard is the determination of ways on prevention, presence and
protection checking against the main bark borers on spruce, which are these kinds of bark beetle: Ips typhographus (L.), Pityogeneses chalcographus (L.) and Ips duplicatus (Sahlb.). There is added new kind of pest and the latest knowledge on bionomy of listed pests and on ways of checking and protection against them.
Relatedness :National : REV/AMD STN 48 2711
** End of Subsector **
** End of Sector **
Information procedure Page 23
Monthly Notifications Register
Notifications registered at CCMC from 2011-10-01 to 2011-10-31
Sector F : FUNDAMENTAL STANDARDS
Register issued on : 2011-11-02
Page 24Subsector F02: UNITS & SYMBOLS
Subsector : F02 Registration Date : 2011-10-05Organization : NENCountry : NetherlandsProject ID : 50001684/0001 Project EstablishedICS : 01.080.30National Ref : NEN 1414:2011 Concept nlTitle : Symbols for safety precautions on escape and rescue plansScope : This standard describes symbols for safety precautions on escape a nd rescue plans. It also
contains information about the making of a plan. The standard is applicable to plans which are a part of evacuation schemes; assault plans used by fire brigades or other aid bodies;business emergency plans for use by buildingmanagers of consultancies.
Relatedness :National : New
Subsector : F02 Registration Date : 2011-10-05Organization : NENCountry : NetherlandsProject ID : 50001685/0001 Project EstablishedICS : 01.070National Ref : NEN 3011:2012 Concept nlTitle : Safety colours and safety signs in workplaces and public areasScope : This standard is applicable to safety colours and safety signs in workplaces and public areas
and replaces NEN 6088.
Relatedness :National : New
Subsector : F02 Registration Date : 2011-10-05Organization : NENCountry : NetherlandsProject ID : 50001686/0001 Project EstablishedICS : 47.020.30National Ref : NEN 3050:2011 Concept nlTitle : Identification colours for pipes conveying fluids in liquid or gaseous condition in land
installations and on board shipsScope : Identification colours for pipes conveying fluids in liquid or gaseous condition in land
installations and on board ships
Relatedness :National : New
** End of Subsector **
Subsector F12: INFORMATION PROCESSING SYSTEMS
Subsector : F12 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038506/0001 Project EstablishedICS :National Ref : PNE 71507
Page 25
Title : Guidelines for the implementation of Organic Law 15/1999, of 13 December, on the protection of personal data in Small and Medium Size organizations
Scope : This standard provides guidelines to help Small and Medium Size organizations to implement the Organic Law 15/1999, of 13 December, on the protection of personal data. The scope applies to personal data recorded on a physical support which makes them capable of processing and to any type of subsequent use of such data by the public and private sectors.
Relatedness :National : New
** End of Subsector **
Subsector F20: QUALITY ASSURANCE
Subsector : F20 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175949/0001 Project EstablishedICS :National Ref : PR NF X50-259Title : Risk management - Business continuity plan - Guidelines
Relatedness :National : New
** End of Subsector **
Subsector F99: UNDETERMINED
Subsector : F99 Registration Date : 2011-10-13Organization : LST Draft Issue Date : 2011-10-17Country : Lithuania Latest Date for Comments : 2011-12-16Project ID : 10000969/0001 Draft for public enquiryICS : 01.120National Ref :Title : Standardization - Part 3: Structure and presentation of standards and other publications
- Chapter 3: Aspects for conformity assessmentScope : This Lithuanian standard defines recommendations for presentation of comformity
assessment aspects in the Lithuanian product standards ant other publications. This document is not applied for drafting of the documents by industry associations, purchasers, regulators, consumers and non-government groups, accreditation bodies, conformity assessment bodies, conformity assessment scheme owners and other interested parties, e.g. insurance organizations
Relatedness :National : New
Subsector : F99 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 15202309/0001 Project EstablishedICS :National Ref : 15202309Title : Fundamentals of maintenance
Page 26
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 27
Monthly Notifications Register
Notifications registered at CCMC from 2011-10-01 to 2011-10-31
Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE
Register issued on : 2011-11-02
Page 28Subsector H04: SPORTS EQUIPMENT
Subsector : H04 Registration Date : 2011-10-12Organization : ASICountry : AustriaProject ID : 00024154/0001 Project EstablishedICS : 97.220.20National Ref : ÖNORM ISO 7794Title : Cross-country skis - Ski-binding screws - Requirements Scope : This International Standard specifies the dimensions, mechanical properties, mounting and
fastening characteristics of screws used for mounting ski bindings on cross-country skis.
Relatedness :National : New
Subsector : H04 Registration Date : 2011-10-12Organization : ASICountry : AustriaProject ID : 00024157/0001 Project EstablishedICS : 97.220.20National Ref : ÖNORM ISO 7331Title : Ski-poles for alpine skiing - Requirements and test methodsScope : This Standard defines the minimum requirements for safety in ski-poles for alpine skiing
and specifies test methods to check conformity with these requirements.
Relatedness :National : New
Subsector : H04 Registration Date : 2011-10-12Organization : ASICountry : AustriaProject ID : 00024176/0001 Project EstablishedICS : 97.220.20National Ref : ÖNORM ISO 10228Title : Cross-country skis - Binding mounting area - Requirements for test screws Scope : This International Standard specifies the dimensions, mechanical properties and fastening
characteristics of test screws used for testing the binding mounting area of cross-country skis.
Relatedness :National : New
Subsector : H04 Registration Date : 2011-10-12Organization : ASICountry : AustriaProject ID : 00024194/0001 Project EstablishedICS : 97.220.20National Ref : ÖNORM ISO 7795Title : Cross-country skis - Ski-binding screws - Test methodsScope : This International Standard specifies test methods for determining the mounting and
fastening characteristics of screws that are intended for fastening ski binding to cross-country skis.
Page 29
Relatedness :National : New
** End of Subsector **
Subsector H99: UNDETERMINED
Subsector : H99 Registration Date : 2011-10-14Organization : NSAICountry : IrelandProject ID : 01078880/0001 Project EstablishedICS : 91.060.50National Ref : I.S. 386Title : Industry guidance for the protection of children from strangulation and asphyxiation by
corded window products.Scope : Guidance on the procurement of assembled and sub-assembled blinds, draperies and
components (including the safety of corded window products).
Relatedness :National : REV/AMD I.S. 386
** End of Subsector **
** End of Sector **
Information procedure Page 30
Monthly Notifications Register
Notifications registered at CCMC from 2011-10-01 to 2011-10-31
Sector I : MECHANICAL ENGINEERING
Register issued on : 2011-11-02
Page 31Subsector I02: FASTENERS
Subsector : I02 Registration Date : 2011-10-12Organization : ASICountry : AustriaProject ID : 00024163/0001 Project EstablishedICS : 21.060.30National Ref : ÖNORM M 1621Title : Retention of bolted assemblies - GeneralScope : This ÖNORM defines the retention of bolted assemblies in the mechanical engineering. It
contains the reasons for the loss of the pretensioning force of bolted assembolies and possioble counteractions. It also gives recommendations for the use of prevailing torque type elements and their properties.
Relatedness :National : New
Subsector : I02 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 06701948/0001 Project EstablishedICS :National Ref : 06701948Title : Slotted pan head screws with small head
Relatedness :National : New
Subsector : I02 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 06701949/0001 Project EstablishedICS :National Ref : 06701949Title : Slotted pan head screws with small head and full dog point
Relatedness :National : New
Subsector : I02 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 06701950/0001 Project EstablishedICS :National Ref : 06701950Title : Slotted pan head screws with shoulder
Relatedness :National : New
Subsector : I02 Registration Date : 2011-10-11Organization : DIN
Page 32
Country : GermanyProject ID : 06701951/0001 Project EstablishedICS :National Ref : 06701951Title : Slotted raised countersunk head screws with full dog point
Relatedness :National : New
Subsector : I02 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 06701952/0001 Project EstablishedICS :National Ref : 06701952Title : Slotted countersunk head screws with full dog point
Relatedness :National : New
Subsector : I02 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 06701953/0001 Project EstablishedICS :National Ref : 06701953Title : Slotted shoulder screws
Relatedness :National : New
** End of Subsector **
Subsector I09: SMALL TOOLS
Subsector : I09 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 12800231/0001 Project EstablishedICS :National Ref : 12800231Title : Concept for the design of 3D models based on properties according to DIN 4000 - Part
175: Inserts, indexable
Relatedness :National : New
Subsector : I09 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 12800237/0001 Project EstablishedICS :National Ref : 12800237
Page 33
Title : Concept for the design of 3D models based on properties according to DIN 4000 - Part 174: Inserts for reaming
Relatedness :National : New
** End of Subsector **
Subsector I17: MACHINERY IN GENERAL (INCLUDING SAFETY)
Subsector : I17 Registration Date : 2011-10-27Organization : UNICountry : ItalyProject ID : 0207D100/0001 Project EstablishedICS : 13.020.01National Ref : E0207D100Title : Major hazards process plants - Safety management systems - Essential requirementsScope : The standard specifies the basic requirements for the safety management systems
applicable to all the plant life cycle phases and the specific requirements to carry out the operational activities.
Relatedness :National : REV/AMD UNI 10617:2009
Subsector : I17 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 10600471/0001 Project EstablishedICS :National Ref : 10600471Title : Conveyors for feed tables in textile industry
Relatedness :National : New
Subsector : I17 Registration Date : 2011-10-27Organization : UNICountry : ItalyProject ID : 5001B190/0001 Project EstablishedICS : 43.180National Ref : U5001B190Title : Safety of machinery - Car wash - Safety requirements, test methodsScope : This standard deal with the hazards, hazardous situations and events and specifies the safety
requirements, the protective measures and the test methods relevant to gantry carwash machines (single or multiple), tunnel carwash machines and self-service carwash machines for washing motor vehicles. This standard takes into account / considers the intended use and reasonably foreseeable misuse (of the mentioned carwash machines) and nor it deals with no-brush high-pressure carwash machines. This standard does not deal with single brush handle controlled carwash machines, nor it deals with drive-through carwash machines and no-brush high-pressure carwash machines for washing motor vehicles. This standard does not deal with the safety requirements relevant to the equipments
Page 34
Scope : installed to service the carwash machines, nor it deals with carwash machines installed into potentially explosive areas.
Relatedness :National : New
** End of Subsector **
Subsector I18: MINING
Subsector : I18 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 00802222/0001 Project EstablishedICS :National Ref : 00802222Title : Mine plans - Deep mining - Part 6: Safekeeping of mining produced hollows
Relatedness :National : New
Subsector : I18 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 00802228/0001 Project EstablishedICS :National Ref : 00802228Title : Rock drilling - Thread connections for thin-walled rotary drilling equipment - Dimensions,
requirements
Relatedness :National : New
Subsector : I18 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 00802229/0001 Project EstablishedICS :National Ref : 00802229Title : Rock drilling - Round thread connections for percussive drilling equipment - Dimensions,
design
Relatedness :National : New
** End of Subsector **
Subsector I23: PUMPS
Subsector : I23 Registration Date : 2011-10-19Organization : TSECountry : TurkeyProject ID : t0011146/0001 Project EstablishedICS : 23.100.10
Page 35
National Ref :Title : Submersible Pumps for Clean WaterScope : This standard covers submersible pumps with one inlet apening, coupled with an electric
motor and used generally in deep wells for supplying dean water.
Relatedness :National : New
** End of Subsector **
Subsector I99: UNDETERMINED
Subsector : I99 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 01200348/0001 Project EstablishedICS :National Ref : 01200348Title : Dispense systems for draught beverages - Part 5: Testing
Relatedness :National : New
Subsector : I99 Registration Date : 2011-10-27Organization : UNICountry : ItalyProject ID : 08000020/0001 Project EstablishedICS : 03.040National Ref : U08000020Title : Non-regulated professions - Extrajudicial counsellor for compensation for damage -
Definition of knowledge, skill and competence requirementsScope : This standard specifies the requirements for the activity of compensation for damage in its
wider acceptation, i.e. resulting from any contractual or extra-contractual liability. The requirements for the extrajudicial counsellor are defined in terms of knowledge, skills and competence, in accordance with the European Qualifications Framework, EQF.
Relatedness :National : New
Subsector : I99 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 08000187/0001 Project EstablishedICS :National Ref : 08000187Title : Medical X-ray equipment up to 300 kV - Rules of construction for structural radiation
protection
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 36
Monthly Notifications Register
Notifications registered at CCMC from 2011-10-01 to 2011-10-31
Sector M : METALLIC MATERIALS
Register issued on : 2011-11-02
Page 37Subsector M15: METALLIC CORROSION
Subsector : M15 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175946/0001 Project EstablishedICS :National Ref : PR NF A05-301Title : Aluminium alloys - Stress corrosion cracking of thick products
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 38
Monthly Notifications Register
Notifications registered at CCMC from 2011-10-01 to 2011-10-31
Sector N : NON-METALLIC MATERIALS
Register issued on : 2011-11-02
Page 39Subsector N03: PETROLEUM PRODUCTS
Subsector : N03 Registration Date : 2011-10-24Organization : HZNCountry : CroatiaProject ID : 00028289/0001 Draft for public enquiryICS : 75.160.20National Ref : nHRN DIN 51603-1Title : Liquid fuels -- Fuel oils -- Part 1: Fuel oils EL, Specifications (DIN 51603-1:2011)
Relatedness :National : New
Subsector : N03 Registration Date : 2011-10-19Organization : TSECountry : TurkeyProject ID : t1012154/0001 Project EstablishedICS : 75.100National Ref :Title : Lubricants-Used in textile machines Scope : This standard specifies lubricating oils used for textile machines.
Relatedness :National : New
** End of Subsector **
Subsector N09: PLASTICS
Subsector : N09 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038499/0001 Project EstablishedICS :National Ref : PNE 53270Title : Plastics. Barcol hardness test.Scope : This standard specifies a method for the determination of hardness for plastics using the
procedure proposed by Barber and Coleman
Relatedness :National : REV/AMD UNE 53270:1976
Subsector : N09 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038501/0001 Project EstablishedICS :National Ref : PNE 53126Title : Plastics. Determination of coefficient of linear thermal expansionScope : This standard specifies a method for the determination of coefficient of linear thermal
expansion
Relatedness :National : REV/AMD UNE 53126:1979
Page 40
Subsector : N09 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038502/0001 Project EstablishedICS :National Ref : PNE 53316Title : Plastics. Glass reinforced plastics. Determination of chemical resistanceScope : This standard specifies a method for the determination of chemical resistance of the glass
reinforced plastics
Relatedness :National : REV/AMD UNE 53316:1978
** End of Subsector **
Subsector N10: CORK
Subsector : N10 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175882/0001 Project EstablishedICS :National Ref : PR NF B57-110Title : Agglomerated Cork stoppers or agglomerated cork stoppers with one washer of natural
corkwood for sparkling wines and gasified wines and sparkling beverages - Mechanical and physical test methods
Relatedness :National : New
Subsector : N10 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175883/0001 Project EstablishedICS :National Ref : PR NF B57-120Title : Agglomerated Cork stoppers or agglomerated cork stoppers with two washers of natural
corkwood for sparkling wines, quality sparkling wines, quality aromatic sparkling wines and aerated sparkling wines - Mechanical and physical test methods
Relatedness :National : New
** End of Subsector **
Subsector N11: WOOD-BASED PANELS
Subsector : N11 Registration Date : 2011-10-12Organization : ASICountry : AustriaProject ID : 00024162/0001 Project EstablishedICS : 79.060.99National Ref : ÖNORM B 3023
Page 41
Title : Solid wood panels - Three-ply formwork panels - Types and requirementsScope : This Austrian Standard is to be used on three-ply formwork panels with a nominal thickness
of 18 mm to 27 mm. This Standard describes the types and defines the requirements. Essential modifications applies to upgrading the thickness range, incorporate of instructions for the use of panels for the production of fair-faced concrete.
Relatedness :National : New
** End of Subsector **
Subsector N14: PLASTICS PIPES
Subsector : N14 Registration Date : 2011-10-12Organization : ASICountry : Austria
Project ID : 00024164/0001Project
Established
ICS :23.040.20, 23.040.45, 91.140.80, 93.030
National Ref : ÖNORM B 5166-3Title : Plastic piping systems for renovation of underground non-pressure drainage and
sewerage networks - Part 3: Complementary provisions concerning the proof of conformity for lining with cured-in-place pipes according to ÖNORMEN EN ISO 11296-1 and -4
Scope : Additionally to ÖNORM EN ISO 11296-1 and -4 this standard includes provisions, which have to be fullfilled according the procedure given in the national foreword of ÖNORM EN ISO 11296-4, to proof conformity of products according § 3 (2) of the Federal Act on Standardization of 1971. This standard is valid for lining with cured-in-place pipes for renovation of underground nonpressure drainage and sewerage networks.
Relatedness :National : New
Subsector : N14 Registration Date : 2011-10-12Organization : ASICountry : AustriaProject ID : 00024177/0001 Project EstablishedICS : 23.040.20, 23.040.45, 93.025National Ref : ÖNORM B 5168-2Title : Plastics piping systems for renovation of underground water supply networks - Proof of
conformity with standards - Part 2: Supplementary provisions for lining with close-fit pipes according to ÖNORM EN ISO 11298-1 and ÖNORM EN ISO 11298-3
Scope : Additionally to ÖNORM EN ISO 11298-1 and -3 this standard includes provisions, which have to be fullfilled according the procedure given in the national foreword of ÖNORM EN ISO 11298-3, to proof conformity of products according § 3 (2) of the Federal Act on Standardization of 1971. This standard is valid for pipes polyethylen (PE) and fittings of PE to build up lining system for renovation of underground water supply networks. Is is applicable for plastic lining systems, which are used for a service temperatur of 20 °C as reference temperature.
Relatedness :National : New
Page 42
Subsector : N14 Registration Date : 2011-10-12Organization : ASICountry : Austria
Project ID : 00024178/0001Project
Established
ICS :23.040.20, 23.040.45, 91.140.80, 93.030
National Ref : ÖNORM B 5166-2Title : Plastic piping systems for renovation of underground nonpressure drainage and
sewerage networks - Part 2: Complementary provisons concerning the proof of conformity for lining with close-fit pipes according to ÖNORMEN EN ISO 11296-1 und -3
Scope : Additionally to ÖNORM EN ISO 11296-1 and -3 this standard includes provisions, which have to be fullfilled according the procedure given in the national foreword of ÖNORM EN ISO 11296-3, to proof conformity of products according § 3 (2) of the Federal Act on Standardization of 1971. This standard is valid for pipes with homogeneous wall of polyethylen (PE) or unplasticized poly(vinyl chloride) (PVC-U) and fittings of PE or PVC-U to build up lining system for renovation of underground nonpressure drainage and sewerage networks. Is is applicable for plastic lining systems, which are used for a service temperatur of 20 °C as reference temperature.
Relatedness :National : New
Subsector : N14 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 05401365/0001 Project EstablishedICS :National Ref : 05401365Title : Pipes of high-density polyethylene (PE-HD) for buried telecommunication - Dimensions
and technical delivery conditions
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 43
Monthly Notifications Register
Notifications registered at CCMC from 2011-10-01 to 2011-10-31
Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT
Register issued on : 2011-11-02
Page 44Subsector S01: ACOUSTICS AND SOUND INSULATION
Subsector : S01 Registration Date : 2011-10-20Organization : SNCountry : NorwayProject ID : NOT11018/0001 Project EstablishedICS : 91.120.20National Ref : prNS 8175Title : Acoustic conditions in buildings - Sound classification of various types of buildingsScope : This standard specifies limit values for sound quality classes in the form of: airborne sound
insulation; impact sound insulation; sound level (noise level); room acoustic measures (reverberation time, reverberation time related to room height, average acoustic absorption coefficient, STI etc. ).In this standard, limit values are given for dwellings, constructions for public and work buildings and handles in special schools and other buildings used for teaching, day-care facilities for schoolchildren, first-year classrooms, hospitals and care institutions, overnight accommodation, offices, etc. For each type of building or area of use, the limit values are divided into four sound quality classes according to expected use and requirements regarding the building at normally furnished units. All the different criteria for acoustic conditions given for a sound quality class shall be satisfied for a building or parts of a building to be classified in a class. The guidelines for assessing compliance are presented in annex B (informative).To take care of accessibility for all (universal design), criteria are given, in addition to room and building acoustics, to use of sound transmission systems (induction coil, sound amplification systems and similar) or other individual technical aids when needed, cf. Technical Building Regulations. Sound reflecting characteristics of buildings support the visually disabled to orientate. This standard can be used to classify buildings or parts of buildings according to the acoustic conditions in the building, to lay down requirements regarding acoustic conditions for all or parts of buildings that are higher than the minimum requirements pursuant to the Building Technical Regulations. It allows producers to declare the sound quality classification of buildings and provides instructions for compliance with the sound requirements pursuant to the Building Technical Regulations. This standard also represents an opportunity to set standardised
Relatedness :National : New
** End of Subsector **
Subsector S09: WATER QUALITY AND WATER SUPPLY
Subsector : S09 (Secondary Subsector)
Registration Date : 2011-10-03
Organization : BSICountry : United KingdomProject ID : 01102479/0001 Project EstablishedICS :National Ref : BS 8582Title : Code of practice for surface water flood risk management
Relatedness :National : New
Subsector : S09 Registration Date : 2011-10-25Organization : AFNOR
Page 45
Country : FranceProject ID : FA175951/0001 Project EstablishedICS :National Ref : PR XP T90-223Title : Water quality - Determination of some medicinal residues in the dissolved fraction of
waters - Solid-phase extraction method and liquid chromatography-mass spectrometry (MS/MS) analysis
Relatedness :National : New
** End of Subsector **
Subsector S22: ENERGY SAVING
Subsector : S22 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175950/0001 Project EstablishedICS :National Ref : PR NF X30-418Title : Waste - Determination of the permeability of a ground by opened type, double ring
infiltrometer test
Relatedness :National : New
** End of Subsector **
Subsector S24: SOIL QUALITY
Subsector : S24 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 11903280/0001 Project EstablishedICS : 13.080.20National Ref : DIN 19683-9Title : Soil quality - Physical laboratory tests - Part 9: Determination of the saturated hydraulic
water conductivity in the cylindrical core-cutter
Relatedness :National : New
** End of Subsector **
Subsector S99: UNDETERMINED
Subsector : S99 Registration Date : 2011-10-19Organization : DS Draft Issue Date : 2007-07-16Country : Denmark Latest Date for Comments : 2012-01-01Project ID : 0M221038/0001 Project EstablishedICS : 11.020National Ref : DSF/DS 2451-5:2011Title : Infection control in the health care sector - Part 5: Requirements for prevention of
surgical site infectionsScope : This standard specifies requirements for infection preventive actions in the perioperative
course and includes: - preoperative preparation of patients before operation - the
Page 46
Scope : microbial cleaness of the air in the operation room - pressure conditions in the operation room - behaviour of the personnel - working clothes and barrier clothes - bandage - antibiotic prophylaxis
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 47
Monthly Notifications Register
Notifications registered at CCMC from 2011-10-01 to 2011-10-31
Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING
Register issued on : 2011-11-02
Page 48Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES
Subsector : T01 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 13202240/0001 Project EstablishedICS :National Ref : 13202240Title : Exhaust gas lines on ships - Gaskets - Part 1: For flanged connections heavy design
Relatedness :National : New
Subsector : T01 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 13202241/0001 Project EstablishedICS :National Ref : 13202241Title : Exhaust gas lines on ships - Gaskets - Part 2: For flanged connections light design
Relatedness :National : New
Subsector : T01 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 13202369/0001 Project EstablishedICS :National Ref : 13202369Title : Recessed handholes and footholes in chain lockers
Relatedness :National : New
Subsector : T01 Registration Date : 2011-10-27Organization : UNICountry : ItalyProject ID : 81041480/0001 Project EstablishedICS : 47.020.01National Ref : U81041480Title : End-of-life treatment of marine units, yachts, small crafts and equipmentsScope : This standard defines the requirements for the end-of-life treatment of marine units,
yachts, small crafts and equipments and the connected activities. It also defines the relationship between owners and the subjects responsible of the management of the end-of-life procedures.
Relatedness :National : New
** End of Subsector **
Subsector T02: AEROSPACE
Page 49
Subsector : T02 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 13114754/0001 Project EstablishedICS : 49.025.30National Ref : DIN 65083Title : Aerospace - Heat treatment of castings of titanium and titanium alloys
Relatedness :National : New
** End of Subsector **
Subsector T03: ROAD VEHICLES
Subsector : T03 Registration Date : 2011-10-18Organization : LST Draft Issue Date : 2011-11-01Country : Lithuania Latest Date for Comments : 2012-01-01Project ID : 10000996/0001 Draft for public enquiryICS : 43.040.20National Ref :Title : Special service vehicles - Colouring, distinctive marks, special light and sound signals -
Technical requirementsScope : The standards specifies technical reguirements for colouring schemes, distinctive marks,
such as emblems, inscriptions, special light and sound signals for special service vehicles
Relatedness :National : New
** End of Subsector **
Subsector T19: ROAD SAFETY
Subsector : T19 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038387/0001 Project EstablishedICS :National Ref : PNE 199121-4:2010/1MTitle : Road traffic management equipment. Cinemometers. Stationary cinemometers. Part 4:
Functional specifications and applying protocolsScope : It introduces modifications regarding metrology in the standard, that comprises both
functioning specifications and applying communication protocols related to equipments for measuring road vehicles speed (cinemometers) and operating statically; that is to say, placed in stationary locations enabling connectivity and exchange of information on a regular basis with one or several control centres as well as defining functioning characteristics of the equipment itself. Specifications for moving cinemometers are also included.
Relatedness :National : REV/AMD UNE 199121-4:2010
Subsector : T19 Registration Date : 2011-10-31Organization : AENOR
Page 50
Country : SpainProject ID : P0038400/0001 Project EstablishedICS :National Ref : PNE 199092-2Title : Road traffic management equipment. Video devices. Video manager. Part 2:
Communication Protocol for IP Video ManagersScope : This standard defines the communication commands Video Manager with computers and
video encoders video decoders for use in control centers
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 51
Monthly Notifications Register
Notifications registered at CCMC from 2011-10-01 to 2011-10-31
Sector Z : INFORMATION TECHNOLOGY
Register issued on : 2011-11-02
Page 52Subsector Z99: UNDETERMINED
Subsector : Z99 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175835/0001 Project EstablishedICS :National Ref : PR NF Z67-137Title : Exchange format in maritime and transport insurance
Relatedness :National : REV/AMD NF Z67-137:201105 (Z67-137)
** End of Subsector **
** End of Sector **
2011-06
List of non-electrotechnical subsectors
Sector A: Services
Subsector Title ISO/TC CEN/TC
reference reference
A01 Tourist services / 329; CEN/WS ETO
A02 Cleaning services / 328
A03 Postal services / 331
A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM
A05 Maintenance services / 319
A06 Building and construction services / 330
A07 Translation services /
A08 Funeral services / CEN/BT/TF 139
A09 Facility management / 348
A10 Services of Real Estate Agents / CEN/BT/TF 180; 373
A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4
A12 Consultancy Services / 395; 381
A13 Expertise Services / 405
A14 Aesthetic Services / 403;409
A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404
Sector B: Building and construction
Subsector Title ISO/TC CEN/TC
reference reference
B01 Fire protection 21 70; 72; 191; 192
B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340
B03 Concrete 71 104; CEN/WS 009
B04 Cement 74; 77 51
B05 Fire tests 92 127
B06 Gypsum / 241
B07 Glass 160 129
B08 Doors and windows 162 33
B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036
B10 Timber structures 165 124
B11 Metal structures 167 135
B12 Masonry 179; 196 125; 246
B13 Solar energy 180 312
B14 Geotechnics 182 341; 396
B15 Sanitary appliances / 163; 7
B16 Taps / /
B17 Lighting equipment and lighting / 50; 169 application technology
B18 Scaffolding / 53
B19 Ceramic tiles 189 67
B20 Drainage equipment / 165
B21 Baths / /
B22 Wallcoverings / 99
B23 District heating / 107
B24 Auxiliary and handicraft work / /
B25 Gas distribution installation and / 234; 235; 282 related equipment
B26 Road building and maintenance / 178; 227
B27 Waterproofing materials / 128; 254; 361; 314
B28 Floor coverings 38/SC 12 134
B29 Aggregates / 154
B30 Floor and surfacing / 217; 303; 323; 390
B31 Heating systems in buildings / 228; 247
B32 Precast concrete products / 177; 229
B33 Building design 205 315; 325; 388
B34 Building and construction – Environmental aspect 350; 351
B99 Undetermined / /
Sector C: Chemicals, chemical engineering and food products
Subsector Title ISO/TC CEN/TC
reference reference
C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054
C02 Paints and related products 35 139; 298; 173
C03 Chemistry 47 317; 363
C04 Laboratory glassware 48 332
C05 Lac / /
C06 Essential oils 54 /
C08 Pesticides 81 /
C09 Surfactants 91 276
C10 Starch 93 /
C11 Tobacco 126 401
C12 Glass plant / /
C13 Fertilizers 134 223; 260
C16 Wood preservatives / /
C17 Trees and plants / /
C18 Adhesives / 193
C19 Chemical analysis 201; 202 382; 347
C20 Explosives and firework / 212; 321
C21 Cosmetics 217 392
C22 Bio-Based products / 411
C99 Undetermined / 386
Sector F: Fundamental standards
Subsector Title ISO/TC CEN/TC
reference reference
F01 Technical drawings 10 /
F02 Units & symbols 12 /
F03 Preferred numbers 19 /
F04 Sieves 24 /
F05 Measuring instruments 30; 113 92; 171; 176; 237;
294; 318; 244; 367; 141; CEN/WS 011
F06 Terminology principles 37 /
F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368
F08 Surfaces / 290
F09 Banking 68 /
F10 Statistics 69 /
F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365
F13 Environmental tests / /
F14 Graphical technology, 130 / sign-boards and nameplates
F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033
F16 Graphical symbols 145 /
F17 Administrative documents 154 CEN/WS MMU
F18 Micrographics 171 /
F19 Optics 172; 187 123; 170
F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362
F21 Value analysis and project / 279 network
F22 Logistics / 379; 273
F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;
CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027
F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060
Sector H: Products for household and leisure use
Subsector Title ISO/TC CEN/TC
reference reference
H01 Cinematography 36 372
H02 Photography 42 /
H03 Consumer questions / 291
H04 Sports equipment 83 136
H05 Oil and gas burners / 47; 131
H06 Horology 114 /
H07 Space heating 116 62; 110; 130; 179; 180
H08 Sizing systems 133; 137 /
H09 Furniture 136 207
H10 Sewing machines 148 /
H11 Heater controls 161 58
H12 Ceramic and glass-ware for food 166 /
H13 Jewellery 174 CEN/WS 047
H14 Caravans 177 245
H15 Toys 181 52
H17 Oil stoves / 46
H18 Central heating boilers / 48; 57; 109; 269
H19 Non-electric cookers and barbecues / 49; 281; 295
H22 Smokers’ lighters and matches / 355; 87
H23 Ladders / 93
H24 Tactile danger warnings / /
H25 Large gas appliances / 106; CEN/CLC/JWG FCGA
H26 Sealing materials / 108; 208
H27 Educational equipment / /
H28 Hunting 191 /
H29 Heat pumps / 113
H30 Equipment for children / 252
H31 Dedicated LPG appliances / 181
H32 Culinary utensils 186 194
H33 Footwear (excluding protective / 309 footwear)
H34 Child safety / CEN/BT/WG 117 398
H99 Undetermined / 299; 364; 369; 402
Sector I: Mechanical engineering
Subsector Title ISO/TC CEN/TC
reference reference
I01 Screw threads 1 /
I02 Fasteners 2 185
I03 Limits & fits / /
I04 Rolling bearings 4 /
I05 Iron pipes 5 203
I06 Pressure vessels 11 54
I07 Shafts 14 /
I08 Agricultural machines 23 144, 334
I09 Small tools 29 213
I10 Splines / /
I11 Machine tools 39 142; 143; 145; 255
I12 Pulleys & belts 41 188
I13 Gas containers 58 23; 286
I14 Gears 60 /
I15 Equipment for petroleum industry 67 12
I16 Internal combustion engines 70; 192 270
I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025
I18 Mining 82 196
I19 Nuclear energy 85 /
I20 Refrigeration 86 44; 182
I21 Chains and chain wheels 100 /
I22 Vacuum technology 112 /
I23 Pumps 115 197
I24 Industrial fans 117 356
I25 Compressors 118 232
I26 Plain bearings 123 /
I27 Earth moving and construction 127; 195 151 equipment
I28 Fluid power 131 /
I29 Gas cleaning / 195
I30 Air distribution / 156
I31 Valves 153; 185 69; 236; 105
I32 Flanges / 74
I33 Information processing in 184 310 automation
I34 Non-ferrous metallic pipes / /
I35 Leisure and recreational machines / 152
I36 Thermoprocessing technology / 186
I37 Printing and paper machines / 198
I38 Leather production, tannery and / 200; 201 related machinery
I39 Machines for metal processing / 202; 322
I40 Industrial piping networks / 267
I41 Membrane filters / 272
I42 Potentially explosive atmospheres / 305
I43 Hydrogen energy 197 /
I44 Nanotechnologies 229 352
I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059
Sector M: Metallic materials
Subsector Title ISO/TC CEN/TC
reference reference
M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110
M02 Zinc / 209
M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron
M04 Copper 26 133
M05 Welding 44 121
M06 Dimensions of wrought products / /
M07 Manganese and chromium 65 /
M08 Light alloys 79 132
M09 Iron ores 102 /
M10 Metallic coatings 107 240
M11 Powder metallurgy 119 /
M12 Aluminium ores 129 /
M13 Ferroalloys 132 /
M14 Nickel 155 /
M15 Metallic corrosion 156 262; 219
M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101
M17 Heavy metal ores 183 /
M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407
M20 Tin and tin alloys / 220
M21 Precious metals / 283
M22 Lead and lead alloys / 306
M99 Undetermined / /
Sector N: Non-metallic materials
Subsector Title ISO/TC CEN/TC
reference reference
N01 Paper and board 6 172
N02 Solid fuels 27 335; 343;383; CEN/WS 019
N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061
N04 Refractories 33 187
N05 Textiles 38 189; 248
N06 Rubber 45 218; 366 CEN/WS 003
N07 Sawn timber 55 38; 175
N08 Mica / /
N09 Plastics 61 249
N10 Cork 87 /
N11 Wood-based panels 89 112
N12 Timber products 99 /
N13 Leather 120 289
N14 Plastics pipes 138 155
N17 Fluorspar 175 /
N18 Glass-fibre reinforced plastics / /
N19 Tapes / 253
N20 Ceramics 206 184
N21 Gaseous fuels and combustible gas 158; 193 238; 408
N22 Feather and related materials / 222
N23 Diamond / 410
N99 Undetermined / /
Sector S: Health, environment and medical equipment
Subsector Title ISO/TC CEN/TC
reference reference
S01 Acoustics and sound 43 126; 211 insulation
S02 Transfusion equipment 76 /
S03 Syringes 84 /
S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043
S05 Dentistry 106 55
S06 Vibration & shock 108 231
S07 Anaesthetic and respiratory 121 215 equipment
S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI
S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034
S10 Surgical implants 150 285; CEN/CLC/JWG AIMD
S11 Contraceptives 157 /
S12 Gas analysis / /
S13 Ergonomics 159 122
S14 Prosthetics 168 /
S15 Surgical instruments 170 /
S16 Aids for the disabled 173 293
S17 Respiratory protective devices / 79
S18 Sterilization of equipment 198 102; 204
S19 First aid equipment and rescue systems / 239
S20 Waste collection, handling and / 183 transportation
S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055
S22 Energy saving / CEN/WS 005 CEN/WS 015
S23 Personal & property protection against aggression/Burglary protection / 263
S24 Soil quality 190 345; CEN/WS 032
S25 Chemical disinfectants and / 216 antiseptics
S26 Environmental management 207 CEN/TC 406; CEN/WS 040
S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120
S28 Demining / CEN/WS 029 CEN/WS 013
S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020
Sector T: Transport, mechanical handling and packaging
Subsector Title ISO/TC CEN/TC
reference reference
T01 Shipbuilding and maritime 8; 188 15; 300 structures
T02 Aerospace 20 274; AECMA; ECSS ;377
T03 Road vehicles 22 301; 326 CEN/WS IMA
T04 Tyres 31 /
T05 Pallets 51 /
T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393
T07 Glass containers 63 /
T08 Cranes 96 147
T09 Materials handling and 101 148; 149 storage equipment
T10 Freight containers 104 119; 280
T11 Steel wire ropes 105 /
T12 Industrial trucks 110 150; 324
T13 Lifting chains, hooks and ropes 111 168
T14 Packaging 122 261; 120
T15 Cycles 149 333
T16 Lifts & escalators 178 10; 242
T17 Builders hoists / /
T18 Elevating platforms / 98
T19 Road safety / 226; 339
T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR
T21 Packaging machines / 146
T22 Off-road vehicles / 354
T99 Undetermined / CEN/WS TAF
Sector Z: Information technology
Subsector Title ISO/TC CEN/TC
Z01 Radiocommunication for IT / /
Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI
Z03 Common O.S.I. activities / CEN/CLC - EWOS
Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;
CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR