books • standards • apparel - products - Marketplace

www.sspc.org

BOOKS • STANDARDS • APPAREL

PRODUCTS2019

PAINTING MANUALS

PAINTING MANUALS

B. SYSTEMS AND SPECIFICATIONS VOL. 2 (PB-00802)

Contains SSPC standards for the cleaning and preparation of steel and concrete surfaces, the selection and application of protective coating systems, the basic composition requirements and performance capabilities of paints and coatings, qualification procedures, and other materials, processes, and technologies. Areas of expertise include: Surface Preparation Standards, Guides, and Specifications, SSPC/NACE joint Technology Reports, Abrasive Specifications, Painting and Coating Systems Guides and Specifications, Paint and Coatings Standards and Specifications, and more.

Members: $205.00 Non-Members: $280.00

A. GOOD PAINTING PRACTICE VOL. 1, 5TH EDITION (PB-01601)

Provides a detailed overview of preparing steel surfaces for coating, involving the removal of physical surface defects, contaminants, and providing the specified surface profile to promote coating adhesion. Table of contents includes: Corrosion of Metals, Designing Structures for Good Coating Performance, Mechanisms of Corrosion Control by Coatings, Coating Composition and Film Formation, Cathodic Protection of Coated Structures, Coating Hot-Dip Galvanized Steel, Overview of Steel Surface Preparation, Hand and Power Tool Cleaning, Non-Metallic Abrasives, Metallic Abrasives, Abrasive Blast Cleaning, Centrifugal Blast Cleaning, Wet Abrasive Blast and Waterjet Cleaning, Soluble Salts: Critical Issues That Impact Coating Performance, Pickling, Chemical Stripping, Pliant Media Blasting, Carbon Dioxide (Dry Ice) Blasting, Solvent/Chemical Pre-Cleaning, Dehumidification During Coating Operations, Application of Industrial Coatings, Coatings for Industrial Steel Structures, Polysiloxane Coatings, Elevated/High Temperature Coatings and Coatings for Insulated Service, and more.


SSPC PAINTING MANUALS

This Pocket Guide is a handy reference to charts, standards, and calculations frequently used during surface preparation and coating application.

Available in Spanish & EnglishEnglish PB-01301Spanish PB-01301-SP

Members: $15.00 or 2 for $25.00 Non-Members: $23.00

SSPC POCKET GUIDE TO COATING INFORMATION

C. CONCRETE COATING COUPON SET (PB-01901)

SSPC’s new Concrete Coating Texture Standard establishes a classification system for textures of finished coats of applied concrete flooring systems. This standard is used in conjunction with a set of tactile comparators, that establish a standard terminology that can be used by owners, specifiers, and concrete flooring installers, to describe various coating surface textures.


Want both SSPC Painting Manuals? Members: $365.00 Non-Members: $490.00

SSPC PRODUCTS CATALOG 3WWW.SSPC.ORG

SSPC VISUAL STANDARDS COATING INSPECTION & TECHNOLOGYA. B. C. D. E.

F. FLASH RUST EVALUATION GUIDELINES (PB-01001)

This is a non-mandatory guide with text and reference photographs describing how to perform a field assessment of the amount of flash rust on a steel surface by brushing the surface with a paint brush wrapped with a white cotton cloth and evaluating the color and amount of rust that transfers to the cloth.


G. ISO 8501:2007 (PB-00701)

This international standard discusses the preparation of steel for the acceptance of paints and coatings and provides a visual reference for the assessment of surfaces prior to and after cleaning.

Published by the International Organization for Standardization (ISO) in collaboration with the Swedish Standards Institute (SIS).


REFERENCE GUIDES

F.

G.

B. SSPC-VIS 2 (PB-00008)

Standard Method of Evaluating Degree of Rusting on Painting Steel SurfacesSSPC’s popular rust standard features a series of 27 full color images and 27 black and white diagrams representing various degrees of spot, general, and pinpoint rusting on painted steel surfaces.


C. SSPC-VIS 3 (PB-00407)

Guide and Reference Photographs for Steel Surfaces Prepared by Hand and Power Tool CleaningContains a series of 43 full-color reference photographs to be used as a supplement to the SSPC standards for hand and power tool cleaned steel. Shows a total of seven different steel surfaces (four uncoated and three previously coated) before and after hand tool cleaning (SP 2), power tool cleaning with power wire brushes and sanding discs (SP 3), power tool cleaning to bare metal (SP 11), and commercial grade power tool cleaning (SP 15).

Available in Spanish & English Members: $120.00 Non-Members: $170.00

D. SSPC-VIS 4 (PB-00105)

Guide and Reference Photographs for Steel Surfaces Prepared by WaterjettingShows a total of six different steel surfaces (two uncoated and four previously coated) before and after waterjetting. Photographs illustrate four separate degrees of cleaning (WJ 1, WJ 2, WJ 3, and WJ 4) for each initial condition, with additional photos that depict the appearance light, moderate, and heavy flash rust after cleaning.


A. SSPC-VIS 1 (PB-00212)

Guide and Reference Photographs for Steel Surfaces Prepared by Dry Abrasive Blast CleaningSSPC’s most widely used visual reference features over 50 full-color photos of previously coated and uncoated, rusted steel surfaces before and after dry abrasive blast cleaning. Cleanliness requirements for conditions depicted are defined by the SSPC surface preparation specifications for white metal (SP 5/NACE 1), near-white (SP 10/NACE 2), commercial (SP 6/NACE 3), industrial (SP 14/NACE 8), and brush-off (SP 7/NACE 4) blast finishes.

Available in Spanish & English Members: $120.00 Non-Members: $170.00

SSPC VIS GUIDES

E. SSPC-VIS 5 (PB-00106)

Guide and Reference Photographs for Steel Surfaces Prepared by Wet Abrasive Blast CleaningShows two uncoated, rusted steel surfaces (Conditions C and D) before and after wet abrasive blast cleaning. Photographs illustrate two degrees of cleaning (WAB 6 and WAB 10) for each initial condition, with additional photos that depict the appearance of light, moderate, and heavy flash rust after cleaning. Also contains a written guide to the use of reference photographs and additional explanatory notes. Cleanliness requirements for conditions depicted are defined by the joint SSPC/NACE surface preparation specifications for commercial (SP 6/NACE 3) and near-white blast cleaning (SP 10/NACE 2).


SSPC PRODUCTS CATALOG4 WWW.SSPC.ORG

SSPC VISUAL STANDARDS COATING INSPECTION & TECHNOLOGY

Discusses the role and qualifications of inspection personnel, the preparation and review of inspection documents, basic inspection practice, the inspection of conventional and specialty coating and lining materials, the unique inspection requirements of various facilities and structures, safety, field test methods and instruments used by coating inspectors, and other important topics. (PB-00314)


This book covers selection criteria for coatings and coatings systems, through a review of the basic components of coatings and handy charts that match coating systems and service environments. End-users will find the sections on application, safety, and environmental issues especially pertinent to their everyday concerns. Chapters cover anti-fouling, industrial powder coatings, and thermal spray (metallizing) for steel. (PB-00801)

Members: $120.00Non-Members: $145.00

Usi

ng C

oati

ngs

Insp

ecti

on In

stru

men

tsC

orro

sion

and

Coa

ting

s

Insp

ecti

on o

f Co

atin

gs

and

Lini

ngs

Sel

ecti

ng C

oati

ngs

for

Indu

stria

l and

M

arin

e S

truc

ture

s

Instrument designed for the visual estimation of the surface profile (texture) of abrasive blast cleaned steel. The complete set includes an illuminated, hand-held magnifier and three metal discs replicating surfaces cleaned with various grades of grit, sand, and shot. (PB-07005)

$425.00

Magnifier Only $50.00(PB-07004)

Magnifier and 3 Disc Set

Each of the book’s 11 sections presents full-color images, guided notes, and workshops describing the step-by-step use of instruments, visual standards and test kits for measuring ambient conditions and surface temperature, measuring surface profile depth, assessing surface cleanliness, sampling and testing for soluble salt contamination, calculating and measuring wet film thickness, measuring coating thickness, adhesion testing, detecting pinholes and holidays in coatings and linings, and more. Includes instructions for administering workshops, a glossary of terms, and an index of industry standards. (PB-00308)

Members: $95.00

Introduces the various mechanisms and forms of corrosion, the prevention and control of corrosion through the use of coatings, and other practices for maintaining corrosion control. Individual topics include: mechanisms of corrosion control by protective coatings, composition and film formation of organic coatings, properties of generic coating types, the economics of corrosion control, and more. (PB-09808)


H. Shot Blast Disc (PB-07001)

$127.00

J. Sand Blast Disc (PB-07002)

$127.00

K. Grit Blast Disc (PB-07003)

$127.00H.

J. K.


CONCRETE INDUSTRY TRAINING & EDUCATION

B. FUNDAMENTALS OF CLEANING AND COATING CONCRETE (PB-00110)

Presents a thorough examination of concrete’s physical and chemical properties including procedures for mixing, placement, consolidation, finishing, curing, and the causes and prevention of concrete deterioration. Contains detailed information on surface cleaning, repair, and preparation, the selection, application, and performance capabilities of protective coating and lining systems, inspection, failure analysis, and more. Additional features include a glossary of terms, a detailed reference bibliography, and other resource materials. Also available on CD-ROM with additional material.


C. CONCRETE COATING ASSESSMENT GUIDE (PB-00111)

Organized according to the steps typically followed in a concrete coating condition assessment and containing a special section of color illustrations to support identification of various concrete conditions that may be encountered in the field. This guide includes a comprehensive glossary that defines key terms used in condition assessments and an appendix of removable sample forms that can be used to supplement those examples given in the text.


A. CONCRETE REPAIR MANUAL (PB-00306)

Published by ACI International, the Building Research Establishment, the Concrete Society, and the International Concrete Repair Institute.With more than 2,000 pages of standards, guides, and other technical documents from SSPC, ACI, ASTM, ICRI and other associations, this two-volume set is the most complete collection of concrete repair information ever assembled. Topics include condition evaluation, materials for repair, surface preparation, application methods, corrosion management, structural strengthening, protection methods, contractual guidance, and more.

Volumes sold only as a set Members: $180.00 Non-Members: $225.00

CONCRETE PUBLICATIONS

A.B.

C.

Written and visual guide to selecting an appropriate method of concrete surface preparation prior to the installation of a coating, lining, or other protective system. Discusses the unique aspects of 12 different surface preparation and cleaning methods: detergent scrubbing, low-pressure water cleaning, acid etching, grinding, abrasive blasting, shotblasting, scarifying, needle scaling, high- and ultrahigh-pressure waterjetting, scabbling, flame blasting, and milling/rotomilling. (PB-09713)


ICRI TECHNICAL GUIDELINE NO. 03732


CONCRETE INDUSTRY TRAINING & EDUCATION

An essential review of basic mathematical principles that apply to formulas and calculations commonly used in the protective coatings field. Begins with easy-to-follow rules, tips, and formulas for simple arithmetic, equation solving, dimensional analysis, geometry, computations, and statistics. Provides specific formulas for calculating dew point, relative humidity, spreading rate, wet and dry film thickness, pigment volume concentration, transfer efficiency, and other important figures. (PB-00305)


Presents a scientific approach to the analysis and prevention of common paint and coating failures on industrial, commercial, and residential structures. The book also discusses adhesion failures and blistering, failures on substrates other than steel (cement, concrete, wood, zinc, aluminum, other metals), failures specific to primers, and failures resulting from deterioration during storage. (PB-00114)


A new volume in the esteemed ASM Handbook series that fills a publication gap identified by Volume Editor Kenneth B. Tator and ASM International. Volume 5B addresses a need for comprehensive information on the part industrial coating user, specifiers, and contractors. Industry respected authors and reviewers make this latest entry to ASM’s Handbook series the authoritative source for industrial coating information worldwide. (PB-01500)


Published by the Painting and Decorating Contractors of America (PDCA).An informative review of architectural, commercial, and industrial painting practices. Discusses coating materials, surface preparation, application methods and equipment, rigging, safety, coating failures, wallcoverings, and more. (PB-00014)


Prac

tica

l Mat

h fo

r th

e Pr

otec

tive

C

oati

ngs

Indu

stry

Pain

t Fi

lm D

egra

dati

on

AS

M H

andb

ook,

Vol

ume

5B:

Prot

ecti

ve O

rgan

ic C

oati

ngs

PDC

A P

aint

ing

and

Dec

orat

ing

C

raft

sman

’s M

anua

l and

Text

book


INDUSTRY TRAINING & EDUCATION SSPC

B. MPI MAINTENANCE REPAINTING MANUAL (PB-MPMAIN)

Published by the Master Painters Institute (MPI).A collection of standards and other reference documents on the maintenance of interior and exterior architectural finishing systems. Presents standards for assessing degrees of surface degradation, the preparation of wood, concrete, and other substrates, and the selection of compatible maintenance repainting systems. Includes an illustrated guide to coating failures and application defects, a copy of MPI’s Approved Products List, a description and evaluation of various interior and exterior finishing systems, and other useful information.


C. CORROSION PREVENTION BY PROTECTIVE COATINGS (PB-00016)

Published by NACE International.Provides an introduction to the history, theory, and practice of high-performance coatings as an engineering approach to corrosion control. Discusses basic corrosion theory and coatings technology, essential coating properties, the importance of good surface preparation, structural design, coating specifications, coating failures, typical coating end-uses, and more.


A. MPI ARCHITECTURAL PAINTING SPECIFICATION MANUAL (PB-MPARCH)

Published by the Master Painters Institute (MPI).A comprehensive collection of standards and other reference documents on commercial and residential painting and wallcovering practices. Describes and evaluates various interior and exterior finishing systems for wood, concrete, and other substrates. Includes an overview of recommended surface preparation methods, a sample specification for architects and other professional specification writers, a copy of MPI’s Approved Products List, with detailed information on 135 different product categories, and other useful information.


MPI PUBLICATIONS

D. PROTECTIVE COATINGS FUNDAMENTALS OF CHEMISTRY AND COMPOSITION (PB-09417)

Presents a comprehensive overview of basic coatings chemistry in an accessible, straightforward way. Introduces the basics of paint composition and polymer design, cohesion and adhesion in paint systems, and the chemistry of film forming systems. Discusses the properties and function of resins, binders, pigments, solvents, additives, and other ingredients used in the formulation of protective coatings. An indispensable reference book for chemists, formulators, laboratory personnel, students, and professionals.


A. B.

C. D.


COMING SOON

SSPC is expanding their collection of Standards and Best Practices publications for the industrial protective coatings industry. These publications provide the essential standards and best practices for conducting successful coatings projects from start to finish. Both Surface Preparation and Coating Application of Concrete and Surface Preparation of Steel Substrate are available for purchase at our website, sspc.org. Follow us on social media to stay up to date on when the following publications will be released:

Surface Coatings in the Oil and Gas Industry (PB-COM02)

Coatings in Power Generation Catalog (PB-COM03)

Coatings in Power Transmission Item (PB-COM04)

Coating Application of Steel Surfaces (PB-COM06)

Coatings in Waste Water and Water Treatment (PB-COM07)

INDUSTRY TRAINING & EDUCATION SSPC

E. SURFACE PREPARATION AND COATING APPLICATION OF CONCRETE (PB-COM01)

The complete collection of SSPC surface preparation specifications and standards for concrete.This compilation provides the latest information relating to the best practices for surface preparation and coating application on concrete surfaces. The compilation provides the latest industry standards including the newly updated SP-13/NACE No.6 Surface Preparation of Concrete Standard and many more. Additional to the industry standards, the compilation includes JPCL articles and technical proceedings from SSPC conferences all directly relating to surface preparation and coating application on concrete surfaces. This is a must have for any individual wishing to enhance their knowledge of preparing and protecting concrete.

Member: $125.00 Non-Member: $175.00

F. SURFACE PREPARATION OF STEEL SUBSTRATE (PB-COM05)

The complete collection of SSPC surface preparation specifications and standards for steel.Including SSPC/NACE Joint Surface Preparation Standards: White Metal Blast Cleaning (SP 5/NACE 1), Commercial Blast Cleaning (SP 6/NACE 3), Brush-Off Blast Cleaning (SP 7/NACE 4), Near White Metal Blast Cleaning (SP 10/NACE 2), Industrial Blast Cleaning (SP 14/NACE 8), and Brush-Off Blast Cleaning of Coated and Uncoated Galvanized Steel, Stainless Steel, and Non-Ferrous Metals (SP 16).

SSPC Standards SSPC Solvent Cleaning (SP 1), Hand Tool Cleaning (SP 2), Power Tool Cleaning (SP 3), Power Tool Cleaning to Bare Metal (SP 11), and Pickling (SP 8).

Member: $125.00 Non-Member: $175.00

SSPC COMPILATIONS

E. F.


SSPC APPARELFu

ll-Z

ip F

leec

e Li

ned

Jac

ket

Full-

Zip

So

ft S

hel

l Jac

ket

Nike brings you their Dri-Fit Technology, comprised of a polyester/spandex blend built to wick moisture and keep you warm. Complete with an embroidered SSPC logo on the left chest, the men’s fit comes in a deep royal blue and the women’s fit comes in white with a grey accented collar.Men’s Deep Royal Blue: PB-0ST68Women’s White: PB-0ST67

Members: $75.00Non-Member: $83.00

Women’s & Men’s Nike Dri-Fit 1/4-Zip Pullover

Full-

Zip

Gre

y Fl

eece

Jac

ket

Unisex, full-zip, 100% polyester jacket with a white SSPC embroidered logoGrey: PB-0ST58


Unisex, water-resistant, 100% polyester, woven shell with 100% polyester micro-fleece liningBattleship Grey: PB-0ST65


Unisex, fleece lined, 100% nylon exterior, full-zip, water resistant jacketMaroon: PB-0ST55


Unisex, 100% cotton, full-zip, Champion hoodie with a white SSPC logo embroidered on the left chestCharcoal: PB-0ST30


Full-

Zip

Ch

amp

ion

Ho

od

ie


SSPC APPAREL

1/4-

Zip

Sw

eate

r

Unisex, cotton/nylon mix, quarter-zip sweater with a white, embroidered SSPC chest logoSlate Blue: PB-0ST40Black: PB-0ST43


Sh

ort

Sle

eve

Tsh

irt

Wo

men

’s C

ard

igan

Sw

eate

r

100% cotton, full-zip, fleece vest with a full color SSPC logo embroidered on the left chestCharcoal: PB-0ST30


Men

’s S

wea

ter V

est

Long Sleeve Shirts

Unisex, 100% cotton, Hanes Tagless short sleeve tshirtRed: PB-0ST59


52% cotton, 31% acrylic, 17% nylon blend, long sleeve, women’s cardigan with a white embroidered SSPC chest logoGrey: PB-0ST60


Unisex, 100% cotton, Hanes Tagless long sleeve shirtBlack: PB-0ST33Maroon: PB-0ST32Red: PB-0ST56


SSPC Beanie

Charcoal: PB-0ST54



SSPC APPAREL

Dri-Fit, 100% polyester, women’s fit, Nike Golf Polo with a white SSPC embroidered logoVarsity Royal: PB-0ST64


Cutter & Buck, wrinkle resistant, cardinal red ladies button down long sleeve shirt with a white SSPC embroidered logo Cardinal Red: PB-0ST66


Men

’s L

on

g S

leev

e B

utt

on

-up

Men

’s L

on

g S

leev

e B

utt

on

-up

Wo

men

’s N

ike

Go

lf P

olo

Wo

men

’s L

on

g S

leev

e B

utt

on

-up

Women’s V-Neck, moisture-wicking, argyle pattern polo with a white SSPC embroidered logoPurple: PB-0ST44


Wo

men

’s Te

ch E

mb

oss

ed P

olo

Men

’s L

on

g S

leev

e B

utt

on

-up

Van Heuson, 60/40 poly-cotton blend, light blue, classic button-down, dress shirt with a white SSPC logoLight Blue: PB-0ST23


Van Heuson, 60/40 poly-cotton blend, English blue, classic button-down, dress shirt with a white SSPC logoEnglish Blue: PB-0ST24


Van Heuson, 60/40 poly-cotton blend, white, classic button-down dress shirt with a full color SSPC logoWhite: PB-0ST22


SSPC


SSPC APPAREL SSPC

Dri-Fit, 100% polyester, Nike Golf Polo with a white SSPC embroidered logoVarsity Royal: PB-0ST63


Men

’s N

ike

Go

lf P

olo

Breathable, 100% polyester, waffle knit polo with a white SSPC logoBurnt Orange: PB-0ST41


Men

’s P

erfo

rman

ce W

affle

-Kn

it P

olo

Moisture-wicking polo with an argyle pattern and white SSPC embroidered logoRegal Red: PB-0ST45Graphite: PB-0ST46Black: PB-0ST62


Men’s Port Authority Tech Embossed Polo

Men’s Short Sleeve Button-up Work Shirt

Stain-resistant, poly-cotton blend, work shirtNavy Blue: PB-0ST49Royal Blue: PB-0ST52Black: PB-0ST57


Port Authority Camouflage Cap

Desert Camo: PB-0ST47


SSPC Tumbler

Red: PB-0ST61



HOW TO ORDER

PhoneCall 1-877-281-7772 (toll free within the USA) or 1-412-281-2331 (from outside the USA), Monday - Friday, 8:30 AM to 5:00 PM, EST. Please leave a message with the SSPC Publications Coordinator.

MailUse the order form to place your order by mail. Please send orders prepaid by credit card to SSPC Publication Sales, 800 Trumbull Drive, Pittsburgh, PA 15205-4365, USA.

Buy It Online!The SSPC MarketPlace offers an easy way to browse and purchase SSPC books, publications, and other printed products. Search by keyword, view items by subject, or choose from an alphabetical title listing. Ordering is fast, convenient, and secure! www.sspc.org/marketplace/

EmailFor product information, order inquiries, or to request a free catalog contact the SSPC Publications Sales Office by email at [email protected]. Credit card orders may also be sent to this address; however, SSPC makes no guarantees regarding the security of transmitting credit card information via email.

PAYMENT OPTIONS

Credit CardSSPC accepts American Express, MasterCard, Visa, and Discover. When placing your order, please provide the complete account number, account expiration date, and the cardholder’s full name and phone number. Credit card orders may be placed by phone, by fax, through the SSPC Online Bookstore, or by mail to the address shown above.

Check or Money OrderMail orders can be prepaid by personal or company check, postal money order, certified check, or bank cashier’s check. All checks must be made payable to “SSPC” in US funds only. Please send orders prepaid by check to SSPC, PO Box 645710, Pittsburgh, PA 15264-5255, USA.

SHIPPING AND HANDLING CHARGES

USA and CanadaA standard 10% shipping and handling charge (up to a maximum of $30.00) must be added to all orders shipped to within the USA (including AK and HI), its protectorates (Guam, Puerto Rico, and the US Virgin Islands), and Canada. Additional charges apply for express delivery.

All Other DestinationsOrders shipped to destinations outside the USA and Canada are subject to additional shipping costs; charges vary by destination and carrier. To ensure proper payment, please contact the SSPC Publication Sales Office for a quote on shipping costs before placing your order.

SHIPPING METHODSStandard Delivery

• Continental United States UPS Ground, DHL Ground, or similar service. Delivery cannot be made to a PO Box; please provide a physical (street) address.• Alaska, Hawaii, and Puerto Rico UPS 2nd Day Air, DHL, or similar service. Delivery cannot be made to a PO Box; please provide a physical (street) address.• Canada UPS, DHL, or other international carrier chosen by SSPC, unless otherwise specified by the customer.

Express Delivery• United States (including Alaska and Hawaii) Services include UPS 2nd and Next Day, DHL 2nd, and Next Day. Charges for express delivery are in addition to standard shipping and handling charges, and vary by service, destination, and weight of shipment. Please contact the SSPC Publication Sales Office for a quote on available services and applicable rates.• Canada Services include UPS and DHL. Charges for express delivery vary by service, destination, and weight of shipment. Charges for express delivery are in addition to standard shipping and handling charges. Please contact the SSPC Publication Sales Office for a quote on available services and applicable rates.• International Delivery (Other than Canada) In order to assure that your order arrives quickly and safely, all orders shipped to locations outside the USA and Canada are sent by UPS or DHL, or other international courier, unless otherwise requested. Not only does this service guarantee faster delivery, it also provides SSPC with the ability to track your order to its final destination. To obtain a quote on shipping costs, please contact the SSPC Publication Sales Office before placing your order. NOTE: Other shipping methods are available upon request.

SALES TAXUnless exempt, all orders received from individuals or companies residing within the Commonwealth of Pennsylvania must include 7% sales tax.

SSPC MEMBER DISCOUNTSUnless stated otherwise, SSPC members receive a discount on most publications. For convenience, discounted prices (where applicable) are already calculated on most items and shown throughout the catalog.

If you see this icon next to an item, it indicates that it is not avaliable as an SSPC Organization Member free publication selection.

HOW TO ORDER SSPC APPAREL ORDER FORM


HOW TO ORDERTo order by phone, call 1-877-281-7772 (toll free within the USA) or 1-412-281-2331 (from outside the USA), Monday through Friday, 8:30 AM to 5:00 PM, EST.

Please see the previous page for important information on placing your order, accepted payment methods, standard and express delivery services, shipping and handling charges, member discounts, and applicable state and county sales taxes. If you are uncertain of your membership status, or if you have any questions regarding the placement or delivery of your order, please contact SSPC.

ORDERED BY SHIP TO (If different than ordered by)

Name

Title Department

Company Name

Address

City State/Province

Zip/Postal Code Country

Phone Fax

E-Mail Website

Name

Title Department

Company Name

Address

City State/Province

Zip/Postal Code Country

Phone Fax

E-Mail Website

What does your COMPANY do?q Facility Owner q Painting Contractorq General Contractor q Specialty Contractor q Concrete/Flooring Contractor q Shop Fabricator q Plant Fabricator/OEM q Arch/Eng/Consulting Firm q Ship Owner q Coatings Manufacturer q Raw Materials Manufacturer q Equipment Manufacturer q Abrasives Manufacturer q Coatings Dist/Dealer/Store q Equipment Dist/Dealer/Store q Research/Regulatory Agency q Other

What type of work do YOU do?q Purchase/Specify Coatingsq Manage Coating Programs/Projects q Purchase/Specify Equipment q Industrial Hygiene/Safety q Environmental Compliance q Testing/Research/Formulation q Sales/Marketing q Technical Service q Executive Management q Applicator/Installer q Blaster/Surface Preparation q Regulator q Other

Credit Card Account Number

Account Expiration Date

Cardholder’s Name

Cardholder’s Signature

Cardholder’s Phone and Fax

METHOD OF PAYMENT

q Check

q Money Order

q American Express

q MasterCard

q Visa

q Discover

SHIPPING (Please be sure to include all applicable charges with payment)

q Standard Delivery

q Express Delivery

q OtherMethod

Method

SSPC MEMBERSHIP STATUS

q Individual

q CompanyMembership Number

Membership Expiration Date

Total for Merchandise

Shipping & Handling

Sales Tax (If applicable)

TOTAL AMOUNT ENCLOSED

Item # Description Quantity Price Each Total

SSPC APPAREL ORDER FORM

800 Trumbull Dr.Pittsburgh, PA 15205412.281.2331

@thesspc /THESSPC

@thesspc /company/thesspc

Documents

books • standards • apparel - products - Marketplace