How to change a flat tire. Bryce Little. Step 1. Pull over as far off the road as far as you can. Turn on hazard lights, and set parking break. Locate your jack, spare tire, and four way or impact wrench. Step 2. - PowerPoint PPT Presentation
How to change a flat tire
How to change a flat tireBryce LittleStep 1Pull over as far off the road as far as you can.Turn on hazard lights, and set parking break.Locate your jack, spare tire, and four way or impact wrench.
Step 2Put the jack on the axle in front or behind the flat tire. Slowly jack vehicle up to where the tire is barely touching the ground.
Step 3Take your impact wrench or four way and begin to loosen lug nuts.
Step 4After flat tire is removed take the spare tire and slide it on to the studs. Take each lug nut and screw them on to start them with your hand. Put on one lug nut and the next one should be put on opposite of the previous one.
Step 5Take your four way or impact and tighten lugs opposite of each other. Make sure lugs are tight then twist the jack handle to drop the jack.
Step 6Remove jack and check air pressure on spare tire.Put bad tire in trunk or truck bed and take to a mechanic ASAP.
Video of how to change a flat tireThat is how to change a flat tire by Bryce Little.