IntElect highly precise - Sumitomo (SHI) Demag Technical Data IntElect 50/420 Wide Platen Sumitomo (SHI)

  • View
    0

  • Download
    0

Embed Size (px)

Text of IntElect highly precise - Sumitomo (SHI) Demag Technical Data IntElect 50/420 Wide Platen Sumitomo...

  • IntElect highly precise

    Technical description

  • Technical Data IntElect 50/370

    Sumitomo (SHI) Demag IntElect 50/370

    Model description IntElect 50/370-45 IntElect 50/370-80 IntElect 50/370-110 IntElect 50/370-180

    International size description 500-45 500-80 500-110 500-180

    Clamping unit 50/370

    Clamping Force / Locking Force [kN] 500/550

    Max. mould opening stroke [mm] 300

    Mould height Min. [mm] 200

    Max./enlarged mould height [mm] 410 1)/510

    Daylight between platens max./enl. [mm] 710 1)/810

    Mould platen (h x v) [mm] 520x570

    Distance between tie bars (h x v) [mm] 370x370

    Min. permissible mould diameter (k) [mm] 200

    Max mould weight / mov. platen [kg] 780/500

    Ejection stroke std./enlarged [mm] 90

    Ejection / Retraction force [kN] 25/25

    Type of drive clamping unit direct drive

    Type of drive ejector belt drive

    Injection unit 45 80 110 180

    Screw diameter [mm] 14 18 18 22 25 18 22 25 30 25 30 35

    L/D ratio 20 20 20 20 20 20 20 20 20 20 20 20

    Spec. injection pressure (up to 400°C) [bar] 2800 2150 2800 2150 1670 2800 2800 2180 1515 2800 2180 1600

    Cylinder head volume, max. [cm³] 14 23 23 34 44 23 40 52 74 59 85 115

    Max. shot weight (PS) [g] 12 20 20 30 39 20 36 46 66 52 75 103

    Max. injection speed > Version force 1) [mm/s] 200 200 200 200 > Version speed (S-Paket) 2) 3) [mm/s] 300 300 300 300

    > Version high speed IntElect [mm/s] 500 500 500 -

    Max. rate of injection > Version force 4) [cm³/s] 31 51 51 76 98 51 76 98 141 98 141 192 > Version speed (S-Paket) 2) 3) [cm³/s] 46 76 76 114 147 76 114 147 212 147 212 288

    > Version high speed [cm³/s] 76 127 127 190 245 127 190 245 353 - - - Max. plasticising rate (PS) 5) [g/s] 1 3,7 3,7 6 10 3,7 6 10 14 10 14 22,7

    Heating capacity [kW] 4,0 4,2 4,2 5,2 5,7 4,2 5,2 5,7 8,3 5,7 8,3 9,4

    Max. screw stroke [mm] 90 90 90 90 90 90 105 105 105 120 120 120

    Max. nozzle stroke [mm] 350

    Max. nozzle dipping depth (WA650) [mm] 20

    Nozzle sealing force [kN] 30

    Number of heating zones 4 4 4 4

    Hopper capacity, optional [ltr.] 35

    Type of drive dosing direct drive

    Type of drive injection direct drive

    General data 50/370-45 50/370-80 50/370-110 50/370-180

    Dry cycle time (Euromap 6) [s-mm] 1,1-259 Net weight 6) [~kg] 4000 4000 4200 4200

    Transport dimensions (l x w x h) [~m] 4,32x1,26x1,84 4,32x1,26x1,84 4,32x1,26x1,84 4,32x1,26x1,84

    Screw drive overhang max. (h) [mm] - 95 95 166 228 95 166 228 351 522 645 789

    The shown specifications reflect the state at the time of printing and refer to the standard cofiguration. We reserve the right to modifiy specifications.

    The maximum injection speed and maximum injection pressure are values, which can not be available simultaneously. The maximum injection pressure and maximum hold pressure are no pressures that can be generated during the whole process.

    These parameters are based on a mains voltage 400 V. A deviating mains voltage will affect the machine parameters.

    1) Basic equipment 2) High speed max. injection speed on request 3) Option for IntElect 4) Basic equiment 5) Plasticising rate depends on processing conditions and material employed 6) The net weight of the machine may vary depending on equipment

    2

  • 3

    Machine dimensions (l x w x h) IntElect 50/370

    21 20

    145

    2188100 1)

    17 79

    11 98

    81 5

    55 -6

    8

    32 759

    7

    10 1000760101

    15 22

    83 8

    1285 722 542

    43

    78

    510357

    66 5 61 4

    3870

    4308 h

    58 1

    72 2

    37 5

    15 7

    12 64

    ZE320

    385 min.

    1) WA211

    Mould mounting surface (fixed platen)

    see Technical description

    h Max. motor projection

    Z

    300

    20

    (33)

    A B

    A B

    min. 200 max. 410 1) / 510

    Ø 12

    5H 8 30

    7. 5

    Ø 12

    5H 8

    20

    Ø 12

    5

    B - B 487 672 / 872 with ZE 242

    447211

    520

    500

    57 0

    24 5 21 0 17 5 10 5

    70

    70

    140 175

    210 245

    Ø 50

    37 0

    42 0

    60 0

    M 12

    600

    370 420

    A - A

    54 5.

    5

    24

    k

    Z

    105 35

    14 0

    70

    M16x32

    24 5

    M16x32

    105

    14 0

    Drilling pattern for robot on fixed platen (Euromap 18-E7)1) Basic equipment

    k = smallest permissible mould diameter 200

  • Technical Data IntElect 50/420 Wide Platen

    Sumitomo (SHI) Demag IntElect 50/420 Wide Platen

    Model description IntElect 50/420-45 IntElect 50/420-80 IntElect 50/420-110 IntElect 50/420-180

    International size description 500-45 500-80 500-110 500-180

    Clamping unit 50/420

    Clamping Force / Locking Force [kN] 500/550

    Max. mould opening stroke [mm] 300

    Mould height Min. [mm] 200

    Max./enlarged mould height [mm] 410 1)/510

    Daylight between platens max./enl. [mm] 710 1)/810

    Mould platen (h x v) [mm] 570x570

    Distance between tie bars (h x v) [mm] 420x370

    Min. permissible mould diameter (k) [mm] 200

    Max mould weight / mov. platen [kg] 780/500

    Ejection stroke std./enlarged [mm] 90

    Ejection / Retraction force [kN] 25/25

    Type of drive clamping unit direct drive

    Type of drive ejector belt drive

    Injection unit 45 80 110 180

    Screw diameter [mm] 14 18 18 22 25 18 22 25 30 25 30 35

    L/D ratio 20 20 20 20 20 20 20 20 20 20 20 20

    Spec. injection pressure (up to 400°C) [bar] 2800 2150 2800 2150 1670 2800 2800 2180 1515 2800 2180 1600

    Cylinder head volume, max. [cm³] 14 23 23 34 44 23 40 52 74 59 85 115

    Max. shot weight (PS) [g] 12 20 20 30 39 20 36 46 66 52 75 103

    Max. injection speed > Version force 1) [mm/s] 200 200 200 200 > Version speed (S-Paket) 2) 3) [mm/s] 300 300 300 300

    > Version high speed IntElect [mm/s] 500 500 500 -

    Max. rate of injection > Version force 4) [cm³/s] 31 51 51 76 98 51 76 98 141 98 141 192 > Version speed (S-Paket) 2) 3) [cm³/s] 46 76 76 114 147 76 114 147 212 147 212 288

    > Version high speed [cm³/s] 76 127 127 190 245 127 190 245 353 - - - Max. plasticising rate (PS) 5) [g/s] 1 3,7 3,7 6 10 3,7 6 10 14 10 14 22,7

    Heating capacity [kW] 4,0 4,2 4,2 5,2 5,7 4,2 5,2 5,7 8,3 5,7 8,3 9,4

    Max. screw stroke [mm] 90 90 90 90 90 90 105 105 105 120 120 120

    Max. nozzle stroke [mm] 350

    Max. nozzle dipping depth (WA650) [mm] 20

    Nozzle sealing force [kN] 30

    Number of heating zones 4 4 4 4

    Hopper capacity, optional [ltr.] 35

    Type of drive dosing direct drive

    Type of drive injection direct drive

    General data 50/420-45 50/420-80 50/420-110 50/420-180

    Dry cycle time (Euromap 6) [s-mm] 1,2-259 Net weight 6) [~kg] 4100 4100 4300 4300

    Transport dimensions (l x w x h) [~m] 4,32x1,26x1,84 4,32x1,26x1,84 4,32x1,26x1,84 4,32x1,26x1,84

    Screw drive overhang max. (h) [mm] - 95 95 166 228 95 166 228 351 522 645 789

    The shown specifications reflect the state at the time of printing and refer to the standard cofiguration. We reserve the right to modifiy specifications.

    The maximum injection speed and maximum injection pressure are values, which can not be available simultaneously. The maximum injection pressure and maximum hold pressure are no pressures that can be generated during the whole process.

    These parameters are based on a mains voltage 400 V. A deviating mains voltage will affect the machine parameters.

    1) Basic equipment 2) High speed max. injection speed on request 3) Option for IntElect 4) Basic equiment 5) Plasticising rate depends on processing conditions and material employed 6) The net weight of the machine may vary depending on equipment

    4

  • 5

    Machine dimensions (l x w x h) IntElect 50/420 Wide Platen

    21 20

    145

    2188100 1)

    17 79

    11 98

    81 5

    55 -6

    8

    32 759

    7

    10 1000760101

    15 22

    83 8

    1285 722 542

    43

    78

    510357

    66 5 61 4

    3870

    4308 h

    58 1

    72 2

    37 5

    15 7

    12 64

    ZE320

    385 min.

    1) WA211

    Mould mounting surface (fixed platen)

    see Technical description

    h Max. motor projection

    Drilling pattern for robot on fixed platen (Euromap 18-E7)

    B - B

    1) Basic equipment

    487 672 / 872 with ZE 242 447211

    570

    500

    57 0

    24 5

    21 0 14 0

    70

    70

    175 210

    245

    Ø 50

    37 0

    42 0

    60 0

    M 16

    600

    420 470

    A - A

    54 5.

    5

    32

    k

    Z

    105 35

    14 0

    70

    M16x32

    24 5

    M16x32

    140

    17 5

    Z

    300

    20

    (33)

    A B

    A B

    min. 200 max. 410 1) / 510

    Ø 12

    5H 8 30

    7. 5

    Ø 12

    5H 8

    Ø 12

    5

    20

    k = smallest permissible mould diameter 200

  • Technical Data IntElect 100/470

    Sumitomo (SHI) Demag Intelect 100/470

    Model description IntElect 100/470-11